Does a postmortem redistribution affect the concentrations of the 7 azaindole-derived synthetic cannabinoid 5F-MDMB-P7AICA in tissues and body fluids following pulmonary administration to pigs?

Many fatal intoxications have been reported in connection with the consumption of newer, highly potent synthetic cannabinoids. Yet, a possible postmortem redistribution (PMR) might complicate reliable interpretation of analytical results. Thus, it is necessary to investigate the PMR-potential of new synthetic cannabinoids. The pig model has already proven to be suitable for this purpose. Hence, the aim of this study was to study the PMR of the synthetic cannabinoid 5F-MDMB-P7AICA and its main metabolite 5F-MDMB-P7AICA-dimethylbutanoic acid (DBA). 5F-MDMB-P7AICA (200 µg/kg body weight) was administered by inhalation to anesthetized and ventilated pigs. At the end of the experiment, the animals were euthanized and stored at room temperature for 3 days. Tissue and body fluid samples were taken daily. Specimens were analyzed after solid phase extraction using a standard addition method and LC-MS/MS, blood was quantified after protein precipitation using a validated method. In perimortem samples, 5F-MDMB-P7AICA was found mainly in adipose tissue, bile fluid, and duodenum contents. Small amounts of 5F-MDMB-P7AICA were found in blood, muscle, brain, liver, and lung. High concentrations of DBA were found primarily in bile fluid, duodenum contents, urine, and kidney/perirenal fat tissue. In the remaining tissues, rather low amounts could be found. In comparison to older synthetic cannabinoids, PMR of 5F-MDMB-P7AICA was less pronounced. Concentrations in blood also appear to remain relatively stable at a low level postmortem. Muscle, kidney, fat, and duodenum content are suitable alternative matrices for the detection of 5F-MDMB-P7AICA and DBA, if blood specimens are not available. In conclusion, concentrations of 5F-MDMB-P7AICA and its main metabolite DBA are not relevantly affected by PMR.

The activity of early-life gene regulatory elements is hijacked in aging through pervasive AP-1-linked chromatin opening.

A mechanistic connection between aging and development is largely unexplored. Through profiling age-related chromatin and transcriptional changes across 22 murine cell types, analyzed alongside previous mouse and human organismal maturation datasets, we uncovered a transcription factor binding site (TFBS) signature common to both processes. Early-life candidate cis-regulatory elements (cCREs), progressively losing accessibility during maturation and aging, are enriched for cell-type identity TFBSs. Conversely, cCREs gaining accessibility throughout life have a lower abundance of cell identity TFBSs but elevated activator protein 1 (AP-1) levels. We implicate TF redistribution toward these AP-1 TFBS-rich cCREs, in synergy with mild downregulation of cell identity TFs, as driving early-life cCRE accessibility loss and altering developmental and metabolic gene expression. Such remodeling can be triggered by elevating AP-1 or depleting repressive H3K27me3. We propose that AP-1-linked chromatin opening drives organismal maturation by disrupting cell identity TFBS-rich cCREs, thereby reprogramming transcriptome and cell function, a mechanism hijacked in aging through ongoing chromatin opening.

Gamma-rays and X-rays spectrometries applied to evaluate soil redistribution.

This work responds to the growing global demand for food, which requires improvements in agricultural production and sustainable management of natural resources. The focus is on soil erosion as a critical element in preserving agricultural productivity. From this perspective, the levels of radionuclides and chemical elements present in the soil, quantified through Gamma-Rays Spectrometry (GRS) and Energy Dispersive X-ray Fluorescence (EDXRF), were used to investigate soil redistribution over time. 27 soil samples ranging from 0 to 30 cm in depth were collected in an agricultural plot located in southern Brazil. Quantitative analysis indicated high mean concentrations of Fe (161 ± 7 gkg-1), Al (110 ± 17 gkg-1), Ca (2.6 ± 0.5 gkg-1), Mn (2.4 ± 0.3 gkg-1) and K (543 ± 165 mgkg-1) in comparison with the other detected elements. The quantification of 137Cs provided a mean inventory of 27 ± 17 Bqm-2. Using the proportional model, an estimated gross erosion rate of 28.2 tonha-1year-1 and a net soil deposition of 6.6 tonha-1year-1 were calculated. Therefore, a net soil loss of 21.6 tonha-1year-1 was experienced within the agricultural plot studied. The data set combination of both techniques with Principal Component Analysis (PCA) revealed correlations between the variables studied and the soil erosion dynamics. The PCA showed a tendency to separate the samples according to their sampling depth. Moreover, 137Cs behavior in soil proved to be similar to the behavior of elements found in fertilizers, like K. On the other hand, the individual influence of 137Cs was not enough to cause significant changes in the samples distribution in the scores plot, highlighting EDXRF as a promising technique to complement soil erosion studies.

Difficulties associated with the interpretation of post-mortem toxicology.

While post-mortem (PM) toxicology results provide valuable information towards ascertaining both the cause and manner of death in coronial cases, there are also significant difficulties associated with the interpretation of PM drug levels. Such difficulties are influenced by several pharmacokinetic and pharmacodynamic factors including PM redistribution, diffusion, site-to-site variability in drug levels, different drug properties and metabolism, bacterial activity, genetic polymorphisms, tolerance, resuscitation efforts, underlying conditions and the toxicity profile of cases (i.e. single- or mixed-drug toxicity). A large body of research has been dedicated to better understanding and even quantifying the influence of these factors on PM drug levels. For example, several investigative matrices have been developed as potential indicators of PM redistribution, but they have limited practical value. Reference tables of clinically relevant therapeutic, toxic and potentially fatal drug concentrations have also been compiled, but these unfortunately do not provide reliable reference values for PM toxicology. More recent research has focussed on developing databases of peripheral PM drug levels for a variety of case-types to increase transferability to real-life cases and improve interpretations. Changes to drug levels after death are inevitable and unavoidable. As such, guidelines and practices will continue to evolve as we further our understanding of such phenomena.

Stability of ischial pressure with 3D thermoplastic elastomer cushion and the characteristics of four types of cushions in pressure redistribution.

Wheelchair cushions are recommended to be used with wheelchair and can protect the buttocks from pain and injury by relieving interface pressure for wheelchair users. However, further investigations are required for proper use in response to the development of new types of wheelchair cushions. The objective of this study was to evaluate physical characteristics of wheelchair cushions by comparing pressure redistributing effects of four types of cushions. The participants were 16 healthy adults who consented to participate in this study. A pressure mapping system (CONFORMat, Nitta Corp.) was used for the measurements. Pressure at ischium was measured immediately after the stabilization of the sitting posture and 10 minutes after. The pressure at ischium significantly decreased with any wheelchair cushions (P < 0.01). A significant negative correlation between body mass index and pressure at ischium was observed without a wheelchair cushion (r = - 0.70), however, the correlation disappeared upon use of a wheelchair cushion. The pressure at ischium increased over time with cushions of urethane, air, and urethane-air hybrid while that with the 3D thermoplastic elastomer cushion did not, and the change in the pressure was statistically less than that in other cushions (P < 0.01). Use of wheelchair cushions was effective in redistribution of the pressure at ischium, and the overtime change in the pressure depends on the type of used cushions.

A plasma membrane-localized transporter remobilizes aleurone layer magnesium for seed germination in rice.

The aleurone layer in cereal grains acts as a major reservoir of essential mineral nutrients, significantly influencing seed germination. However, the molecular mechanism underlying the redistribution of nutrients from the aleurone layer in the germinating seed is still not well understood. Here, in rice, we identified a plasma membrane (PM) localized magnesium transporter, MAGNESIUM RELEASE TRANSPORTER 3 (MGR3), is critical for seed germination. OsMGR3 is predominantly expressed in the aleurone layer cells of endosperm, facilitating magnesium remobilization during germination. Non-invasive Micro-test Technology assay data demonstrated that the loss-of-function of OsMGR3 restrained magnesium efflux from the aleurone layer. In the embryo/endosperm grafting experiment, we observed that the mutation of OsMGR3 in the aleurone layer suppressed the growth and differentiation of the embryo during germination. Furthermore, magnesium fluorescence imaging revealed the osmgr3 mutant seeds showed impaired exportation of aleurone layer-stored magnesium to the embryo, consequently delaying germination. Importantly, we discovered that disrupting OsMGR3 could inhibit pre-harvest sprouting without affecting rice yield and quality. Therefore, the magnesium efflux transporter OsMGR3 in the aleurone layer represents a promising genetic target for future agronomic trait improvement.

Elastic Polyurethane as Stress-Redistribution-Adhesive-Layer (SRAL) for Directly Integrated High-Energy-Density Flexible Batteries.

The low mechanical reliability and integration failure are key challenges hindering the commercialization of geometrically flexible batteries. This work proposes that the failure of directly integrating flexible batteries using traditional rigid adhesives is primarily due to the mismatch between the generated stress at the adhesive/substrate interface, and the maximum allowable stress. Accordingly, a stress redistribution adhesive layer (SRAL) strategy is conceived by using elastic adhesive to redistribute the generated stress. The function mechanism of the SRAL strategy is confirmed by theoretical finite element analysis. Experimentally, a polyurethane (PU) type elastic adhesive (with maximum strain of 1425%) is synthesized and used as the SRAL to integrate rigid cells on different flexible substrates to fabricate directly integrated flexible battery with robust output under various harsh environments, such as stretching, twisting, and even bending in water. The SRAL strategy is expected to be generally applicable in various flexible devices that involve the integration of rigid components onto flexible substrates.

Lead Iodide Redistribution Enables In Situ Passivation for Blading Inverted Perovskite Solar Cells with 24.5% Efficiency.

Blade-coating stands out as an alternative for fabricating scalable perovskite solar cells. However, it demands special control of the precursor composition regarding nucleation and crystallization and currently exhibits lower performance than the spin-coating process. It is mainly the resulting film morphology and excess lead iodide (PbI2) distribution that influences the optoelectronic properties. Here, the effectiveness of introducing N-Methyl-2-pyrrolidone (NMP) to regulate the structure of the perovskite layer and the redistribution of PbI2 is found. The introduction of NMP leads to the accumulation of excess PbI2, mainly on the top surface, reducing residual PbI2 at the perovskite buried interface. This not only facilitates the passivation of perovskite grain boundaries but also eliminates the potential degradation of the PbI2 triggered by light illumination in the perovskite buried interface. The optimized NMP-modified inverted perovskite solar cell achieves a champion efficiency of 24.5%, among the highest reported blade-coated perovskite solar cells. Furthermore, 13.68 cm2 blading perovskite solar modules are fabricated and demonstrate an efficiency of up to 20.4%. These findings underscore that with proper modulation of precursor composition, blade-coating can be a feasible and superior alternative for manufacturing high-quality perovskite films, paving the way for their large-scale applications in photovoltaic technology.

California Exodus? A Network Model of Population Redistribution in the United States.

Motivated by debates about California's net migration loss, we employ valued exponential-family random graph models to analyze the inter-county migration flow networks in the United States. We introduce a protocol that visualizes the complex effects of potential underlying mechanisms, and perform in silico knockout experiments to quantify their contribution to the California Exodus. We find that racial dynamics contribute to the California Exodus, urbanization ameliorates it, and political climate and housing costs have little impact. Moreover, the severity of the California Exodus depends on how one measures it, and California is not the state with the most substantial population loss. The paper demonstrates how generative statistical models can provide mechanistic insights beyond simple hypothesis-testing.

Elucidating the callus-to-shoot-forming mechanism in Capsicum annuum 'Dempsey' through comparative transcriptome analyses.

BACKGROUND: The formation of shoots plays a pivotal role in plant organogenesis and productivity. Despite its significance, the underlying molecular mechanism of de novo regeneration has not been extensively elucidated in Capsicum annuum 'Dempsey', a bell pepper cultivar. To address this, we performed a comparative transcriptome analysis focusing on the differential expression in C. annuum 'Dempsey' shoot, callus, and leaf tissue. We further investigated phytohormone-related biological processes and their interacting genes in the C. annuum 'Dempsey' transcriptome based on comparative transcriptomic analysis across five species. RESULTS: We provided a comprehensive view of the gene networks regulating shoot formation on the callus, revealing a strong involvement of hypoxia responses and oxidative stress. Our comparative transcriptome analysis revealed a significant conservation in the increase of gene expression patterns related to auxin and defense mechanisms in both callus and shoot tissues. Consequently, hypoxia response and defense mechanism emerged as critical regulators in callus and shoot formation in C. annuum 'Dempsey'. Current transcriptome data also indicated a substantial decline in gene expression linked to photosynthesis within regenerative tissues, implying a deactivation of the regulatory system governing photosynthesis in C. annuum 'Dempsey'. CONCLUSION: Coupled with defense mechanisms, we thus considered spatial redistribution of auxin to play a critical role in the shoot morphogenesis via primordia outgrowth. Our findings shed light on shoot formation mechanisms in C. annuum 'Dempsey' explants, important information for regeneration programs, and have broader implications for precise molecular breeding in recalcitrant crops.

Charge Redistribution in Mechanochemical Reactions for Solid Interfaces.

Mechanochemical strategies are widely used in various fields, ranging from friction and wear to mechanosynthesis, yet how the mechanical stress activates the chemical reactions at the electronic level is still open. We used first-principles density functional theory to study the rule of the stress-modified electronic states in transmitting mechanical energy to trigger chemical responses for different mechanochemical systems. The electron density redistribution among initial, transition, and final configurations is defined to correlate the energy evolution during reactions. We found that stress-induced changes in electron density redistribution are linearly related to activation energy and reaction energy, indicating the transition from mechanical work to chemical reactivity. The correlation coefficient is defined as the term "interface reactivity coefficient" to evaluate the susceptibility of chemical reactivity to mechanical action for material interfaces. The study may shed light on the electronic mechanism of the mechanochemical reactions behind the fundamental model as well as the mechanochemical phenomena.

Reciprocal Changes in Sagittal Spinal Alignment After L5-S1 Anterior Lumbar Interbody Fusion.

OBJECTIVE: Degenerative diseases of the lumbar spine decrease lumbar lordosis (LL). Anterior lumbar interbody fusion (ALIF) at the L5-S1 disc space improves segmental lordosis, LL, and sagittal balance. This study investigated reciprocal changes in spinopelvic alignment after L5-S1 ALIF. METHODS: A retrospective chart review identified patients who underwent L5-S1 ALIF with or without posterior fixation at a single institution (November 1, 2016 to October 1, 2021). Changes in pelvic tilt, sacral slope, proximal LL (L1-L4), distal LL (L4-S1), total LL (L1-S1), segmental lordosis, pelvic incidence-LL mismatch, thoracic kyphosis, cervical lordosis, and sagittal vertical axis were measured on preoperative and postoperative radiographs. RESULTS: Forty-eight patients were identified. Immediate postoperative radiographs were obtained at a mean (SD) of 17 (20) days after surgery; delayed radiographs were obtained 184 (82) days after surgery. After surgery, patients had significantly decreased pelvic tilt (15.71° [7.25°] vs. 17.52° [7.67°], P = 0.003) and proximal LL (11.86° [10.67°] vs. 16.03° [10.45°], P < 0.001) and increased sacral slope (39.49° [9.27°] vs. 36.31° [10.39°], P < 0.001), LL (55.35° [13.15°] vs. 51.63° [13.38°], P = 0.001), and distal LL (43.17° [9.33°] vs. 35.80° [8.02°], P < 0.001). Segmental lordosis increased significantly at L5-S1 and decreased significantly at L2-3, L3-4, and L4-5. Lordosis distribution index increased from 72.55 (19.53) to 81.38 (22.83) (P < 0.001). CONCLUSIONS: L5-S1 ALIF was associated with increased L5-S1 segmental lordosis accompanied by pelvic anteversion and a reciprocal decrease in proximal LL. These changes may represent a reversal of compensatory mechanisms, suggesting an overall relaxation of spinopelvic alignment after L5-S1 ALIF.

Electron Manipulation and Surface Reconstruction of Bimetallic Iron-Nickel Phosphide Nanotubes for Enhanced Alkaline Water Electrolysis.

Developing high-efficiency and stable bifunctional electrocatalysts for water splitting remains a great challenge. Herein, NiMoO4 nanowires as sacrificial templates to synthesize Mo-doped NiFe Prussian blue analogs are employed, which can be easily phosphorized to Mo-doped Fe2xNi2(1-x)P nanotubes (Mo-FeNiP NTs). This synthesis method enables the controlled etching of NiMoO4 nanowires that results in a unique hollow nanotube architecture. As a bifunctional catalyst, the Mo-FeNiP NTs present lower overpotential and Tafel slope of 151.3 (232.6) mV at 100 mA cm-2 and 76.2 (64.7) mV dec-1 for HER (OER), respectively. Additionally, it only requires an ultralow cell voltage of 1.47 V to achieve 10 mA cm-2 for overall water splitting and can steadily operate for 200 h at 100 mA cm-2. First-principles calculations demonstrate that Mo doping can effectively adjust the electron redistribution of the Ni hollow sites to optimize the hydrogen adsorption-free energy for HER. Besides, in situ Raman characterization reveals the dissolving of doped Mo can promote a rapid surface reconstruction on Mo-FeNiP NTs to dynamically stable (Fe)Ni-oxyhydroxide layers, serving as the actual active species for OER. The work proposes a rational approach addressed by electron manipulation and surface reconstruction of bimetallic phosphides to regulate both the HER and OER activity.

The Congestion "Pandemic" in Acute Heart Failure Patients.

Congestion not only represents a cardinal sign of heart failure (HF) but is also now recognized as the primary cause of hospital admissions, rehospitalization, and mortality among patients with acute heart failure (AHF). Congestion can manifest through various HF phenotypes in acute settings: volume overload, volume redistribution, or both. Recognizing the congestion phenotype is paramount, as it implies different therapeutic strategies for decongestion. Among patients with AHF, achieving complete decongestion is challenging, as more than half still experience residual congestion at discharge. Residual congestion is one of the strongest predictors of future cardiovascular events and poor outcomes. Through this review, we try to provide a better understanding of the congestion phenomenon among patients with AHF by highlighting insights into the pathophysiological mechanisms behind congestion and new diagnostic and management tools to achieve and maintain efficient decongestion.

Vegetation redistribution is predicted to intensify soil organic carbon loss under future climate changes on the Tibetan Plateau.

Vegetation redistribution may bring unexpected climate-soil carbon cycling in terrestrial biomes. However, whether and how vegetation redistribution alters the soil carbon pool under climate change is still poorly understood on the Tibetan Plateau. Here, we applied the G-Range model to simulate the cover of herbs, shrubs and trees, net primary productivity (NPP) and soil organic carbon density (SOCD) at the depth of 60 cm on Tibetan Plateau for the individual years 2020 and 2060, using climate projection for Representative Concentration Pathways (RCP) 4.5 and RCP8.5 scenarios with the RegCM4.6 model system. Vegetation redistribution was defined as the transitions in bare ground, herbs, shrubs and trees between 2020 and 2060, with approximately 57.9 % (RCP4.5) and 59 % (RCP8.5) of the area will redistribute vegetation over the whole Tibetan Plateau. The vegetation cover will increase by about 2.4 % (RCP4.5) and 1.9 % (RCP8.5), while the NPP and SOCD will decrease by about -14.3 g C m-2 yr-1 and -907 g C m-2 (RCP4.5), and -1.8 g C m-2 yr-1and -920 g C m-2 (RCP8.5). Shrubs and trees will expand in the east, and herbs will expand in the northwest part of the Plateau. These areas are projected to be hotspots with greater SOCD reduction in response to future climate change, and will include lower net plant carbon input due to the negative NPP. Our study indicates that the SOC pool will become a carbon source under increased air temperature and rainfall on the Tibetan Plateau by 2060, especially for the area with vegetation redistribution. These results revealed the potential risk of vegetation redistribution under climate change in alpine ecosystems, indicating the policymakers need to pay attention on the vegetation redistribution to mitigate the soil carbon emission and achieve the goal of carbon neutrality on the Tibetan Plateau.

Smart seat cushion feasibility pilot study: automated interface pressure modulation of individuals with spinal cord Injury.

This study investigates the functionality and feasibility of a novel smart seat cushion system designed for wheelchair users with spinal cord injuries. The cushion, equipped with air cells that serve as both sensors and actuators, was tested on 24 participants for its real-time pressure mapping, automated pressure redistribution, and pressure offloading functions. A commercial pressure mat was concurrently used to validate the cushion's pressure modulation functions. Additionally, the perceived comfort of the cushion was evaluated using General Discomfort Assessment (GDA) and Discomfort Intensity (DIS) scores, which provided insights into participants' overall comfort and discomfort levels. Real-time pressure profiles generated by the cushion resembled commercial pressure mat readings. During tests with individuals with spinal cord injury, the cushion was able to dynamically generate and display the real-time pressure profile of a seated individual with strong precision (correlation to commercial pressure mat: r ranging from 0.76 to 0.88), providing effective input into pressure modulation functions. Pressure redistribution algorithms eliminated peak pressure and reduced the overall pressure at the interface. Pressure offloading algorithms automatically identified the regions with the highest interface pressure and subsequently relieved the pressure from those areas. User feedback showed that the cushion was comfortable after redistribution and offloading. This work demonstrated the feasibility of an advanced smart seat cushion system for wheelchair users with spinal cord injuries. The cushion was capable of redistributing pressure evenly across the seating surface, ensuring user's comfort. Additionally, it identifies and eliminates high-pressure points, further improving comfort and reducing the risk of pressure injuries.

Majority of wheelchair users acquire pressure injuries in their lifetime, where the magnitude and duration of sitting interface pressure are major contributing factors to develop pressure injuries.Compliant cushions and frequent weight shifting can reduce the magnitude and duration of sitting interface pressure; however, the long-term effectiveness of these cushions and the user's lack of compliance to the weight shifting protocols impact their efficacy drastically.An automated cushion system that can reduce the magnitude of the pressure based on the user's current pressure profile and offload pressure from vulnerable areas would improve the effectiveness of the cushion and compensate for poor adherence to weight shifting protocols.Automated solutions will significantly improve the quality of care provided to wheelchair users and reduce the risk of developing pressure injuries.

Impact of squat set configuration on mechanical performance in paired sets of upper-body exercises.

BACKGROUND: Paired sets and alternative set configurations (e.g., cluster sets) are frequently employed by strength and conditioning practitioners; however, their synergistic impact remains underexplored in research. This study aimed to elucidate whether the set configuration used in a lower-body exercise affects mechanical performance during paired sets of upper-body exercises. METHODS: Twenty-one resistance-trained individuals (14 men and 7 women) randomly completed three experimental sessions that involved four sets of five repetitions at 75%1RM during both the bench press and bench pull exercises. The three experimental sessions varied solely in the activity conducted during the inter-set rest periods of each upper-body exercise: (i) Traditional squat - six squat repetitions without intra-set rest at 65%1RM; (ii) Rest redistribution squat - two clusters of three repetitions of the squat exercise at 65%1RM with 30 s of intra-set rest; and (iii) Passive rest - no exercise. RESULTS: The rest redistribution set configuration allowed the sets of the squat exercise to be performed at a faster velocity than the traditional set configuration (p = 0.037). However, none of the mechanical variables differed between the exercise protocols neither in the bench press (p ranged from 0.279 to 0.875) nor in the bench pull (p ranged from 0.166 to 0.478). CONCLUSIONS: Although rest redistribution is an effective strategy to alleviate fatigue during the sets in which it is implemented, it does not allow subjects to perform better in subsequent sets of the training session.

Redistribution of nitrogen to feed the people on a safer planet.

Lack of nitrogen limits food production in poor countries while excessive nitrogen use in industrial countries has led to transgression of the planetary boundary. However, the potential of spatial redistribution of nitrogen input for food security when returning to the safe boundary has not been quantified in a robust manner. Using an emulator of a global gridded crop model ensemble, we found that redistribution of current nitrogen input to major cereals among countries can double production in the most food-insecure countries, while increasing global production of these crops by 12% with no notable regional loss or reducing the nitrogen input to the current production by one-third. Redistribution of the input within the boundary increased production by 6-8% compared to the current relative distribution, increasing production in the food-insecure countries by two-thirds. Our findings provide georeferenced guidelines for redistributing nitrogen use to enhance food security while safeguarding the planet.

Spatiotemporal dynamic temperature variation dominated by ion behaviors during groundwater remediation using direct current.

Direct current (DC) electric field has shown promising performance in contaminated site remediation, in which the Joule heating effect plays an important role but has been previously underappreciated. This study focuses on the spatiotemporal characteristics and mechanism of temperature change in heterogeneous porous media with applied DC. The heating process can be divided into four phases: preferential heating of the low permeability zone (LPZ), rapid heating in the middle region, temperature drop and hot zone shift, and reheating. The dynamic ion behaviors with complex interplays among reactions, electrokinetic-driven migration, and mixed convection induced an uneven redistribution of ions and dominated the heating rate and temperature distribution. The concentration of major ions near the pH jump decreased to 1% of the initial value, even though ions were continuously pumped into the heating zone. This ion depletion caused a drop in current, heating rate, and temperature. Here ions cannot be delivered rapidly into the ion-depleted zone by electromigration due to the potential flattening in the surrounding region. The presence of LPZ intensified the nonuniformity of ion redistribution, where a regional focusing of water-soluble ions was observed, and weakened the temperature rebound compared with that using homogeneous sand. These results provide a new perspective on the regulation of DC heating in site remediation.

Artificial Heterointerfaces with Regulated Charge Distribution of Ni Active Sites for Urea Oxidation Reaction.

In contrast to the thermodynamically unfavorable anodic oxygen evolution reaction, the electrocatalytic urea oxidation reaction (UOR) presents a more favorable thermodynamic potential. However, the practical application of UOR has been hindered by sluggish kinetics. In this study, hierarchical porous nanosheet arrays featuring abundant Ni-WO3 heterointerfaces on nickel foam (Ni-WO3/NF) is introduced as a monolith electrode, demonstrating exceptional activity and stability toward UOR. The Ni-WO3/NF catalyst exhibits unprecedentedly rapid UOR kinetics (200 mA cm-2 at 1.384 V vs. RHE) and a high turnover frequency (0.456 s-1), surpassing most previously reported Ni-based catalysts, with negligible activity decay observed during a durability test lasting 150 h. Ex situ X-ray photoelectron spectroscopy and density functional theory calculations elucidate that the WO3 interface significantly modulates the local charge distribution of Ni species, facilitating the generation of Ni3+ with optimal affinity for interacting with urea molecules and CO2 intermediates at heterointerfaces during UOR. This mechanism accelerates the interfacial electrocatalytic kinetics. Additionally, in situ Fourier transform infrared spectroscopy provides deep insights into the substantial contribution of interfacial Ni-WO3 sites to UOR electrocatalysis, unraveling the underlying molecular-level mechanisms. Finally, the study explores the application of a direct urea fuel cell to inspire future practical implementations.