Tensile and Tearing Properties of a Geocomposite Mechanically Damaged by Repeated Loading and Abrasion.

The behaviour of geosynthetics can be affected by many agents, both in the short and long term. Mechanical damage caused by repeated loading or abrasion are examples of agents that may induce undesirable changes in the properties of geosynthetics. The research conducted in this work complemented previous studies and consisted of submitting a geocomposite, isolated and successively, to two degradation tests: mechanical damage under repeated loading and abrasion. The geocomposite (a nonwoven geotextile reinforced with polyethylene terephthalate filaments) was tested on both sides (with or without filaments) and directions (machine and cross-machine). The impact of the degradation tests on the geocomposite was quantified by monitoring changes in its tensile and tearing behaviour. The results showed that, in most cases, the degradation tests caused the deterioration of the tensile and tearing behaviour of the geocomposite, affecting its reinforcement function. The decline in tensile strength correlated reasonably well with the decline in tearing strength. Changing the side and direction tested influenced, in some cases (those involving abrasion), the degradation experienced by the geocomposite. The reduction factors (referring to tensile and tearing strength) for the combined effect of the degradation agents tended to be lower when determined by using the common method (compared to those resulting directly from the successive exposure to both agents).

Breathable Films with Self-Cleaning and Antibacterial Surfaces Based on TiO2-Functionalized PET Membranes.

A promising approach that uses the sol-gel method to manufacture new breathable active films with self-cleaning and antibacterial surfaces is based on the PET membranes obtained via ion track technology with a pore density of 10-7 cm-2 and a pore diameter of about 500 ± 15 nm, coated with a layer of TiO2 anatase, with a thickness of up to 80 nm. The formation of the photocatalytically active TiO2 anatase phase was confirmed using Raman analysis. Coating the PET membrane with a layer of TiO2 increased the hydrophobicity of the system (CA increased from 64.2 to 92.4, and the antibacterial activity was evaluated using Escherichia coli and Staphylococcus aureus bacteria with the logarithmic reduction factors of 3.34 and 4.24, respectively).

Protection of Workers Exposed to Radiofrequency Electromagnetic Fields: A Perspective on Open Questions in the Context of the New ICNIRP 2020 Guidelines.

Workers in occupational settings are usually exposed to numerous sources of electromagnetic fields (EMF) and to different physical agents. Risk assessment for industrial workplaces concerning EMF is not only relevant to operators of devices or machinery emitting EMF, but also to support-workers, bystanders, service and maintenance personnel, and even visitors. Radiofrequency EMF guidelines published in 2020 by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) may also be indirectly applied to assess risks emerging from EMF sources at workplaces by technical standards or legislation. To review the applicability and adequacy to assess exposure to EMF in occupational settings in the European Union, the most current ICNIRP guidelines on radiofrequency EMF are reviewed. Relevant ICNIRP fundamentals and principles are introduced, followed by practical aspects of exposure assessment. To conclude, open questions are formulated pointing out gaps between the guidelines' principles and occupational practice, such as the impact of hot and humid environments and physical activity or controversies around ICNIRPS's reduction factors in view of assessment uncertainty in general. Thus, the article aims to provide scientific policy advisors, labor inspectors, or experts developing standards with a profound understanding about ICNIRP guidelines' applicability to assess hazards related to radiofrequency EMF in occupational settings.

Influence of Mechanical Damage under Repeated Loading on the Resistance of Geogrids against Abrasion.

Geogrids are building materials widely used for soil reinforcement that can be affected by the action of many degradation agents throughout their service life. The potential negative effect of the degradation agents should be properly estimated and accounted for during the design phase. The main aim of this work was to study the influence of mechanical damage under repeated loading on the resistance of geogrids against abrasion. Three geogrids (one extruded and two woven) were exposed in isolation to mechanical damage under repeated loading and abrasion tests, followed by the successive exposure to both degradation tests. The damage suffered by the geogrids was evaluated by visual inspection and by tensile tests. Based on the changes found in tensile strength, reduction factors were determined. The reduction factors obtained directly from the successive exposure were compared to those resulting from a method in which the reduction factors obtained for the isolated effect of each degradation agent were multiplied. Results indicated that the abrasion process tended to be affected by a previous exposure to mechanical damage under repeated loading and that the multiplication of the reduction factors obtained for the isolated effects of the degradation agents may not correctly represent their combined effect.

Some clues about the changes in wine aroma composition associated to the maturation of "neutral" grapes.

This paper presents a study of the influence of the harvesting date on concentrations of odorants in Moristel wines of two vintages. The wine made from grapes harvested early facilitated the accumulation of acetaldehyde (associated with low polyphenols concentrations) and higher concentrations of branched acids. A reason for these greater levels could be the lack of reduction factors (NADH or NADPH). Other changes with potential sensory consequences are the decrease of the branched acid/branched alcohol, branched ester/branched acid and branched ester/branched alcohol ratios that occurs as the grapes ripen. Besides, the variations of varietal or typical maturation markers did not have sensory importance. These results suggest that the characteristics of wines associated to the degree of maturity of grapes are mostly related to the changes in the profiles of fermentative compounds (especially acetaldehyde) induced by changes in the polyphenolic content and in the medium in which the yeast develops.

Resistance of Geosynthetics against the Isolated and Combined Effect of Mechanical Damage under Repeated Loading and Abrasion.

The behaviour of materials used for developing engineering structures should be properly foreseen during the design phase. Regarding geosynthetics, which are construction materials used in a wide range of engineering structures, the installation on site and the action of many degradation agents during service life may promote changes in their properties, endangering the structures in which they are applied. The evaluation of the damage suffered by geosynthetics, like installation damage or abrasion, is often carried out through laboratory tests. This work studied the behaviour of five geosynthetics (three geotextiles and two geogrids) after being individually and successively exposed to two degradation tests: mechanical damage under repeated loading and abrasion. The short-term mechanical and hydraulic behaviours of the geosynthetics were analysed by performing tensile tests and water permeability normal to the plane tests. Reduction factors were determined based on the changes occurred in the tensile strength of the geosynthetics. Findings showed that mechanical damage under repeated loading and abrasion tended to affect the mechanical and hydraulic properties of the geosynthetics and that the reduction factors calculated according to the traditional method may not be able to represent accurately the damage suffered by the materials when exposed successively to the degradation mechanisms.

Approximation of clogging in a leachate collection system in municipal solid waste landfill in Osecna (Northern Bohemia, Czech Republic).

The research was focused on approximation of clogging in a leachate collection system in municipal solid waste landfill in Osecna, situated near the location Osecna, region Liberec, Northern Bohemia, Czech Republic, by analysis of numerical experiment results. To approximate the clogging of the leachate collection system after fifteen years of landfill operation (1995-2009) were successfully tested modified De Zeeuw-Hellinga transient drainage theory. This procedure allows application of the reduction factors to express clogging of the leachate collection system in Osecna landfill. The results proved that the modified De Zeeuw-Hellinga method with reduction factors can serve as a good tool for clogging approximation in a leachate collection system in Osecna landfill.

Validación de la capacidad del proceso de pasteurización de la albúmina humana para inactivar virus / Validation of the capacity of the human albumin pasteurization process for virus inactivation

La validación de la capacidad de aclaramiento viral de los procesos de fabricación de productos biológicos constituye un requisito regulatorio en Cuba. Se recomienda introducir la pasteurización en los procesos de producción de la albúmina como un método capaz de inactivar virus; por ello, el objetivo del estudio fue validar la capacidad de inactivación viral de la etapa de pasteurización del proceso de producción de la albúmina humana al 20 y 25 por ciento. Los modelos virales que abarcan los posibles contaminantes de la materia prima, se diluyeron 1:10 en la albúmina en sus 2 concentraciones y se sometieron a tratamiento térmico a 60 °C durante 10 h. Se tomaron muestras a diferentes intervalos de tiempo para la confección de las curvas de cinética de inactivación. Se determinó el factor de reducción aportado por la pasteurización para cada virus. El tratamiento a 60 °C de la albúmina al 20 y 25 por ciento disminuyó significativamente la carga viral inicial con que se retó la etapa, con valores de p< 0,002 y p< 0,021, respectivamente, y se obtuvieron factores de reducción superiores a 4 log del título de todos los virus. La etapa de pasteurización le aportó a la albúmina humana al 20 y 25 por ciento un adecuado nivel de seguridad(AU)

The validation of the capacity of viral clearance in the manufacturing processes of biopharmaceuticals is a regulatory requirement in Cuba. It is recommended to introduce the pasteurization in the manufacturing processes of serum albumin as a method of inactivating viruses. The objective of this study was to validate the capacity of viral inactivation in the phase of pasteurization of the 20 percent and 25 percent human albumin production process The viral models covering the possible pollutants of the raw materials were diluted at 1:10 in albumin in 2 concentrations and they were heat-treated at 60 °C for 10 h. Several samples at different time intervals were taken to design the inactivation kinetic curves. The reduction factor of pasteurization for each virus was estimated. The treatment of 20 percent and 25 percent albumin at 60 °C decreased significantly the initial viral load in the stage, with p< 0.002 and p< 0.021 respectively. The reduction factors exceeded 4 log of the titers of all viruses. The stage of pasteurization gave adequate level of safety to the 20 percent and 25 percent human albumin(AU)

Validación de la capacidad del proceso de pasteurización de la albúmina humana para inactivar virus / Validation of the capacity of the human albumin pasteurization process for virus inactivation

La validación de la capacidad de aclaramiento viral de los procesos de fabricación de productos biológicos constituye un requisito regulatorio en Cuba. Se recomienda introducir la pasteurización en los procesos de producción de la albúmina como un método capaz de inactivar virus; por ello, el objetivo del estudio fue validar la capacidad de inactivación viral de la etapa de pasteurización del proceso de producción de la albúmina humana al 20 y 25 por ciento. Los modelos virales que abarcan los posibles contaminantes de la materia prima, se diluyeron 1:10 en la albúmina en sus 2 concentraciones y se sometieron a tratamiento térmico a 60 °C durante 10 h. Se tomaron muestras a diferentes intervalos de tiempo para la confección de las curvas de cinética de inactivación. Se determinó el factor de reducción aportado por la pasteurización para cada virus. El tratamiento a 60 °C de la albúmina al 20 y 25 por ciento disminuyó significativamente la carga viral inicial con que se retó la etapa, con valores de p< 0,002 y p< 0,021, respectivamente, y se obtuvieron factores de reducción superiores a 4 log del título de todos los virus. La etapa de pasteurización le aportó a la albúmina humana al 20 y 25 por ciento un adecuado nivel de seguridad

The validation of the capacity of viral clearance in the manufacturing processes of biopharmaceuticals is a regulatory requirement in Cuba. It is recommended to introduce the pasteurization in the manufacturing processes of serum albumin as a method of inactivating viruses. The objective of this study was to validate the capacity of viral inactivation in the phase of pasteurization of the 20 percent and 25 percent human albumin production process The viral models covering the possible pollutants of the raw materials were diluted at 1:10 in albumin in 2 concentrations and they were heat-treated at 60 °C for 10 h. Several samples at different time intervals were taken to design the inactivation kinetic curves. The reduction factor of pasteurization for each virus was estimated. The treatment of 20 percent and 25 percent albumin at 60 °C decreased significantly the initial viral load in the stage, with p< 0.002 and p< 0.021 respectively. The reduction factors exceeded 4 log of the titers of all viruses. The stage of pasteurization gave adequate level of safety to the 20 percent and 25 percent human albumin