Short-term residual characteristics of ambient-cured green geopolymer mortar exposed to elevated temperatures.

Every structure might be exposed to fire at some point in its lifecycle. The ability of geopolymer composites to withstand the effects of fire damage early before it is put out is of great importance. This study examined the effects of fire on geopolymer composite samples made with high-calcium fly ash and alkaline solution synthesised from waste banana peduncle and silica fume. A ratio of 0.30, 0.35, and 0.4 was used in the study for the alkaline solution to fly ash. Also used were ratios of 0.5, 0.75, and 1 for silica oxide (silica fume) to potassium hydroxide ratio. The strength loss, residual compressive strength, percentage strength loss, relative residual compressive strength, ultrasonic pulse velocity, and microstructural properties of the thirteen mortar mixes were measured after exposure to temperatures of 200, 400, 600, and 800 °C for 1 h, respectively. The results reveal that geopolymer samples exposed to elevated temperatures showed great dimensional stability with no visible surface cracks. There was a colour transition from dark grey to whitish brown for the green geopolymer mortar and brown to whitish brown for the control sample. As the temperature rose, weight loss became more pronounced, with 800 °C producing the most significant weight reduction. The optimum mixes had a residual compressive strength of 25.02 MPa after being exposed to 200 °C, 18.72 MPa after being exposed to 400 °C, 14.04 MPa after being exposed to 600 °C, and 7.41 MPa after being exposed to 800 °C. The control had a residual compressive strength of 8.45 MPa after being exposed to 200 °C, 6.67 MPa after being exposed to 400 °C, 3.16 MPa after being exposed to 600 °C, and 2.23 MPa after being exposed to 800 °C. The relative residual compressive strength decreases for green geopolymer mortar are most significant at 600 and 800 °C, with an average decrease of 0.47 and 0.30, respectively. The microstructure of the samples revealed various phase changes and new product formations as the temperature increased.

[Research Progress and Prospect of Herbicide Residue Characteristics in Black Soil Region of China].

Food security is the top priority of a country. As an important granary in China, the northeast black land is a "ballast" to ensure national food security. However, the long-term and high-intensity application of herbicides in black land farmland has led to the accumulation and migration of herbicides in the soil, which affects soil quality, crop yield, and quality and hinders sustainable agricultural development in the black soil. To solve the problem of herbicide residues in black land farmland, it is necessary to control the application of herbicides from the source, as well as to elucidate the current situation, spatial and temporal evolution, and driving factors of herbicide residues, in order to achieve scientific prevention and control and precise policy implementation. The main contents of this study were as follows:1systematically summarize the application status and problems of herbicides in the farmland of black soil in China, suggesting that there are currently problems such as irregular application and insufficient product innovation of herbicides in the farmland of black soil; 2 comprehensively analyze the current status of herbicide residues, identify the deficiencies in recent studies on herbicide residue characteristics, spatial distribution, and pollution diagnosis in the farmland of black soil, and clarify the gaps in the research on the residue characteristics of herbicides in the farmland of black soil; and 3 propose the research prospect and key orientation for the herbicide residue diagnosis and risk management in the farmland of the black soil region of China. The results of this study can provide science and technology support for guaranteeing soil health, food security, and ecosystem security of black land farmland in China.

Research progress on residual characteristics, ecological risk, and abatement of fomesafen in farmland soil.

Fomesafen, a long residual diphenyl ether herbicide, is widely used for control of annual and perennial broadleaf weeds in peanut and soybean fields. With the development of agricultural production mechanization in China, the application of fomesafen has been rising. Long-term and large-scale application leads to obvious residues in the soil. As a consequence, the resulting ecological and environmental problems need urgent attention from the agricultural and environmental protection departments. We systematically reviewed the research progress about the residual characteristics, ecotoxicological effects and abatement process of fomesafen in farmland soil, and proposed some prospects from the residual formation mechanisms, safe application limit standard, abatement mechanism and technology, aiming to provide some new insights and ideas for solving the problem of residual injury of fomesafen.

Effect of Thermal Exposure on Residual Properties of Wet Layup Carbon Fiber Reinforced Epoxy Composites.

Ambient cured wet layup carbon fiber reinforced epoxy composites used extensively in the rehabilitation of infrastructure and in structural components can be exposed to elevated temperature regimes for extended periods of time of hours to a few days due to thermal excursions. These may be severe enough to cause a significant temperature rise without deep charring as through fires at a small distance and even high-temperature industrial processes. In such cases, it is critical to have information related to the post-event residual mechanical properties and damage states. In this paper, composites are subjected to a range of elevated temperatures up to 260 °C over periods of time up to 72 h. Exposure to elevated temperature regimes is noted to result in a competition between the mechanisms of post-cure that can increase the levels of mechanical characteristics, and the deterioration of the resin and the bond between the fibers and resin that can reduce them. Mechanical tests indicate that tensile and short beam shear properties are not affected negatively until the highest temperatures of exposure considered in this investigation. In contrast, all elevated temperature conditions cause deterioration in resin-dominated characteristics such as shear and flexure, emphasizing the weakness of this mode in layered composites formed from unidirectional fabric architectures due to resin deterioration. Transitions in failure modes are correlated through microscopy to damage progression both at the level of fiber-matrix interface integrity and through the bulk resin, especially at the inter-layer level. The changes in glass transition temperature determined through differential scanning calorimetry can be related to thresholds that indicate changes in the mechanisms of damage.

[Distribution, Source, and Ecological Risk Evaluation of the PAHs and PCBs in the Sediments from Sanya River].

Polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), two typical persistent organic pollutants, are the research focus due to their mutagenesis, carcinogenesis, teratogenesis, and bioaccumulation. The content distribution and residual characteristics of PAHs and PCBs were investigated in the sediments from the Sanya River. Source apportionment was further explored based on the analysis of the spatial distribution, and the ecological risk evaluation was carried out with the sediment quality criteria and standards. The results indicate that the content of ΣPAHs and ΣPCBs in the sediment range from 265.00 µg·kg-1 to 6735.00 µg·kg-1 and 1.75 µg·kg-1 to 92.75 µg·kg-1, with relatively high contents in the east and west river upstream, respectively, which had a strong correlation with the industrial structure and river movement of the study area. The composition and source apportionment demonstrate that PAHs originated mostly from the combustion of petroleum with low PAHs, and haxa-CB and hepta-CB are the predominant PCBs congeners, primarily resulting from the migration of PCBs in the capacitor. The ecological risk evaluation demonstrates that the biotoxic effect of the PAHs is not obvious, with a low ecological risk. However, several PAHs monomers exceeded the standard significantly in some sampling sites, which should be of concern due to its serious threat of exposure to organisms. The probability of a biotoxic effect of PCBs is 10%-50%, which occasionally produces a negative ecological effect.

[Residual Characteristics and Health Assessment Analysis of OCPs and PCBs in Karst Groundwater].

Residual levels of organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) in karst groundwater in Nanshan Laolongdong were measured using a gas chromatograph equipped with a micro-63Ni electron capture detector to determine the residual characteristics including concentration, distribution, and source of OCPs and PCBs. Results revealed that the total concentration range of OCPs was 34.8-623.2 ng·L-1, and the mean value was 215.6 ng·L-1, among which the total concentration ranges of HCHs, DDTs, and other OCPs were 8.2-23.6, 4.5-363.7, and 22.2-235.9 ng·L-1, respectively, and the mean values were 15.9, 104.5, and 95.3 ng·L-1; the total concentration range of PCBs was 6.0-40.7 ng·L-1, and the mean value was 16.8 ng·L-1. Overall, the pollution of OCPs and PCBs was above average; the results of multiple comparisons revealed that statistically significant differences occurred in the concentration of some OCPs and PCBs. The pollution levels in the water of each sampling point in the study area were quite different; however, the seasonal distribution of OCPs and PCBs was relatively uniform. Source analyses revealed that HCHs' source was the input of lindane in the surrounding environment, DDTs recently originated from illegal use of industrial DDT, other OCPs originated from atmospheric deposition and agricultural input, and PCBs' sources included both historical remains and enterprise production processes. The results of Pearson correlation analyses revealed that some organo-halogen pollutants were homologous or had similar sources and decomposition mechanisms. According to health risk assessment model, drinking water in the study area would not cause obvious harm to human health, but children were more sensitive to pollutants than adults.

Dissipation of chlorothalonil in the presence of chlortetracycline and ciprofloxacin and their combined effects on soil enzyme activity.

The long-term application of substantial amounts of fungicides and antibiotic-polluted organic manure (OM) in greenhouse has caused the co-existence of fungicides and antibiotics in soils. However, little is known about the effects of antibiotics on the persistence of fungicides in soils or their combined effects on soil enzyme activity. In this study, fungicide chlorothalonil (CTL) alone and in combination with antibiotic chlortetracycline (CTC) or ciprofloxacin (CIP) were repeatedly added to OM-amended soil to investigate the changes in the residual characteristics of CTL and in soil dehydrogenase and urease activity. The results showed that CTL rapidly dissipated in soils with the corresponding half-lives of 0.9-3.2, which initially increased, then decreased and finally stabilized with an increased treatment frequency. The dissipation of CTL was inhibited by CTC and CIP during the first several treatments. The soil dehydrogenase and urease activity in CTL-treated soils was inhibited during the first six treatments and then recovered afterwards. Compared with the OM-amended soil+CTL treatment, the OM-amended soil+CTL+CTC and OM-amended soil+CTL+CIP treatments had stronger inhibitory effects on soil enzyme activity during the first six repeated treatments but exhibited slight stimulating effects afterwards. Therefore, the results obtained in this study suggested that the long-term co-existence of CTL, CTC, and CIP altered the dissipation characteristics of CTL in soil and affected the soil enzyme activity levels. The prudent application of large and frequent of fungicides and OM-containing antibiotic residues in greenhouses should therefore be carefully considered in order to reduce the long-term combined pollution in soils.

Study on the Residual Characteristics of Pesticide and Heavy Metals in Panax notoginseng / 中国药房

OBJECTIVE:To know the residual characteristics of organochlorine pesticides and 5 kinds of heavy metals (Cu, As,Cd,Hg and Pb) in Panax notoginseng. METHODS:P. notoginseng samples with 3 years were collected from Baiyi Town, Songming County and Liushao Township,Xundian County of Yunnan Province in Apr. 2013. 60 strains of P. notoginseng and 1 kg rhizosphere soil samples were also collected. The organochlorine pesticide residues and 5 kinds of heavy metals on its various parts and soil samples were detected. Pesticide residues determination method in Chinese Pharmacopoeia(2010 edition,volumeⅠ)was conducted to determine the organochlorine pesticides and 5 kinds of heavy metals (Cu,As,Cd,Hg and Pb). RESULTS:There was pentachloronitrobenzene in different parts of P. notoginseng from Baiyi Town,Songming County,and the contents were root bark>fibrous≥notches>ribs>leaves;there were pentachloronitrobenzene only in the root bark and fibrous of P. notoginseng from Liushao Township,Xundian County,and the contents were root bark>fibrous. No Hg was detected in any part of P. notoginseng samples,and the other heavy metals were highest in root bark;As and Pb were relatively high in soil,the contents of As and Pb in samples were far lower than in soil. CONCLUSIONS:The contents of pesticide residues and heavy metals in different parts of P. notoginseng are different,and those in root bark are relatively high. P. notoginseng sample contains organochlorine pesticides, which is mainly pentachloronitrobenzene;P. notoginseng sample has relatively strong accumulation of Cd.