Erosive Effect of Canned Juices and Soft Drinks on Surface Roughness of Restorative Materials Used in Pediatric Dentistry: An Ex Vivo Study.

Aim: To evaluate and compare the effect of fruit juice (orange) and cola drink (noncarbonated) on the surface texture of composite (3M ESPE Filtek Bulk Fill) and glass ionomer cement (GIC) (ChemFil Superior). Materials and methods: A total of eighty pellets each were prepared with composite (3M ESPE Filtek Bulk Fill) and GIC (ChemFil Superior) material using a brass mold with an inner diameter of 3 mm and a thickness of 3 mm according to the manufacturer's instructions. Around 10 pellets of each material were placed in airtight plastic containers. The baseline surface texture value was obtained by profilometer. An 8-day immersion regime was carried out according to Maupome et al. After the 8-day test period, pellets were reevaluated for surface texture final value. The values were statistically analyzed. Results: A statistically significant lower surface roughness of composite restorative material was observed when treated with high-concentration orange juice and medium-concentration. Conversely, a statistically significant lower surface roughness of GIC restorative material was observed when it was treated with the low-concentration group, high-concentration orange juice, and medium-concentration orange juice. Conclusion: The surface roughness patterns of restorative materials increased as the number of immersion regimes increased. How to cite this article: Vishwanathaiah S, Maganur PC, Khabrany HM, et al. Erosive Effect of Canned Juices and Soft Drinks on Surface Roughness of Restorative Materials Used in Pediatric Dentistry: An Ex Vivo Study. Int J Clin Pediatr Dent 2024;17(7):807-811.

The Gloss Retention of Esthetic Restorations Following Simulated Brushing with Charcoal Oral Products: An In-Vitro Study.

AIM: To assess the gloss and gloss retention of two esthetic restorative materials after brushing with a charcoal-infused toothbrush and activated charcoal toothpaste compared to their standard counterparts in all possible combinations. MATERIALS AND METHODS: In this study,104 disc-shaped specimens were prepared, 52 from each of the two materials: Beautifil II LS composite resin (Giomer) and Fuji II LC resin-modified glass ionomer (RMGI). Specimens of each material were divided into 4 groups (n = 13) according to the tested brushing procedure: group A-standard toothbrush + standard non-whitening toothpaste (S-S), group B-standard toothbrush + activated charcoal toothpaste (S-CH), group C-charcoal-infused toothbrush + standard non-whitening toothpaste (CH-S), and group D-charcoal-infused toothbrush + activated-charcoal toothpaste (CH-CH). Gloss was recorded using a gloss meter initially and after each brushing protocol. The data were statistically analyzed with two-way analysis of variance (ANOVA) and Tukey HSD post hoc tests using SPSS® v.27 software at 5% significance level. RESULTS: Beautifil II LS showed the highest gloss values after brushing in group D (44 ± 3.9), which was not significantly different from its initial value (46.1 ± 1.8), followed by groups A (32.2 ± 4), B (23.2 ± 3.6), and C (22.7 ± 3.9), while Fuji II LC showed its highest gloss values after brushing in groups D (16.6 ± 3.7) and a (15.4 ± 8.7), followed by groups C (10.9 ± 6) and B (4.4 ± 2.5), all were significantly lower than their respective initial gloss values. CONCLUSION: The gloss of Giomer and RMGI reduced significantly following the brushing with the tested brushing procedures except for the Giomer group brushed with a combination of charcoal-infused toothbrush and activated-charcoal toothpaste. CLINICAL SIGNIFICANCE: The brushing using a combination of charcoal-infused toothbrush and activated-charcoal toothpaste is recommended for the gloss retention of Beautifil II LS restorations. However, the gloss of the Fuji II LC cannot be retained after any of the brushing procedures. How to cite this article: Farghal NS, Awadalkreem F, Abouelhonoud NA, et al. The Gloss Retention of Esthetic Restorations Following Simulated Brushing with Charcoal Oral Products: An In-Vitro Study. J Contemp Dent Pract 2024;25(5):473-479.

Effectiveness of Different Teaching Methods in Enhancing Dental Undergraduate Students' Knowledge and Restorative Cement Manipulation Skills.

Background and objectives Developing manual skills is important in dental education. Clinical skills can be taught via clinical demonstrations, and knowledge can be delivered through lectures. Performing dental restorations is an essential skill for dentists, which requires a comprehensive knowledge of the manipulation of the restorative materials. The present study sought to compare the effectiveness of flipped learning (FL), smart class (SC), and traditional teaching (TT) methods in two arenas of learning: acquisition of theoretical knowledge and practical skill in manipulating dental restorative cement. Materials and methods All first-year undergraduate dental students (n = 60) were divided into three study groups and exposed to three teaching methods, namely TT, SC, and FL of three different dental restorative cements. Each teaching method was followed by an evaluation of the "knowledge assessment score," a live demonstration of the cement manipulation, and the participants' "skill assessment score." Descriptive statistics were expressed as mean and SD for continuous variables. A comparison of the knowledge assessment scores and skill assessment scores between the study groups was analyzed using a one-way ANOVA test. Intergroup comparison was done using Tukey's post hoc test. Results The FL group had a significantly higher "knowledge assessment score" (p = 0.001), while there was no significant difference between the SC and TT groups (p = 1.0). Both FL and SC groups had significantly higher "skill assessment scores" (p = 0.001), with no significant difference between them (p = 0.798). Conclusions Of the three teaching methods assessed, FL proved to be more effective in the knowledge acquired and clinical competence demonstrated when compared to the other two techniques in dental education.

Research progress of veneer materials for implant-fixed restoration in edentulous jaws and their clinical application. / æ— ç‰™é¢Œæ‚£è€ ç§æ¤å›ºå®šä¹‰é½¿é¥°é¢ææ–™ç ”ç©¶åŠåº”ç”¨è¿›å±•.

The commonly used materials for fixed restorations in edentulous jaws include acrylic resins, polymerized ceramics, ceramics, and zirconia, which have distinct physicochemical properties and clinical application features. The selection of these materials in clinical practice is related to the prosthodontic space, oral soft and hard tissue conditions, occlusal force, lifestyle habits, oral parafunctions, opposing dentition materials, and expectations of patients. Common mechanical complications associated with fixed restorations in edentulous jaws are cracking/chipping and abrasion of the facing materials, which can be avoided through occlusal adjustment, restoration design and processing, and the selection of appropriate restorative materials. This article reviews the characteristics, selection, and design considerations of commonly used materials for fixed restorations in edentulous jaws, as well as the causes and management of common clinical complications related to restorative materials, aiming to provide references for the selection of appropriate materials in fixed restorations for edentulous jaws in clinical practice.

Restauração transcirúrgica: passo a passo / Transsurgical restoration: step by step

Sabe-se que para uma restauração ser considerada um sucesso clínico é preciso que haja uma concomitância saudável entre a estrutura dentária, o material restaurador e as estruturas biológicas periodontais. As restaurações transcirúrgicas caracterizam-se como procedimentos alternativos para possibilitar a restauração de dentes com cárie dentária extensa, restaurações subgengivais desadaptadas e fraturas. O presente estudo teve como objetivo realizar um relato de caso de um procedimento cirúrgico-restaurador, através de uma técnica de restauração transcirúrgica. Este estudo tem como justificativa relatar um caso clínico, colaborando com maiores informações sobre a escolha da técnica a ser empregada, mostrando em quais situações devemos escolher uma restauração transcirúrgica e quais seus benefícios. Também, salientar se devemos fazer a recuperação do espaço biológico do periodonto ou não(AU)

It is known that for a restoration to be considered a clinical success, there must be a healthy concomitance between the tooth structure, the restorative material and the periodontal biological structures. Transsurgical restorations are characterized as alternative procedures to enable the restoration of teeth with extensive dental caries, maladapted subgingival restorations and fractures. The present study aims to carry out a case report of a surgical-restorative procedure, using a transsurgical restoration technique. This study is justified by reporting a clinical case, providing more information on the choice of technique to be used, showing in which situations we should choose a transsurgical restoration and what its benefits are. Also, highlight whether we should recover the biological space of the periodontium or not(AU)

Evaluation of the Effect of Various Beverages and Food Materials on the Color Stability of Provisional Materials: An In Vitro Study.

Aim This study aims to evaluate the color stability of four provisional materials: polymethyl methacrylate (DPI® Self-Cure), 10-ethoxylated bisphenol A dimethacrylate (Oratemp® C&B), bis-acryl composite resin (Systemp® C&B, Ivoclar Vivadent), and bis-acryl composite (Systemp® C&B, Ivoclar Vivadent) combined with light-cure composite (Fusion Flo® LC). Materials and methods A total of 40 specimens were meticulously crafted from modeling wax into discs, each precisely 2 mm thick and 20 mm in diameter. Four provisional materials were packed into molds, yielding 10 specimens for each material group. After mixing and polymerization, the specimens were trimmed and polished. Reflectance spectrophotometers were used for initial color assessments based on the CIELAB color space system. Staining solutions, including coffee, Tata Green Tea, Pepsi, and turmeric, were prepared to mimic dietary agents. Artificial saliva, replicating oral conditions, was formulated and sterilized. The specimens were then immersed in various solutions for 15 days at 37 °C. Color measurements were taken on days 2 and 15 using the same spectrophotometer, calculating color differences (ΔE) from changes in L*, a*, and b* values. Results DPI Self-Cure (polymethyl methacrylate) was found to be the most color-stable temporary restorative material, followed by Vivadent (bis-acryl composite resin), Oratemp (10-ethoxylated bisphenol A dimethacrylate), and Fusion Flo (light-cure composite). Fusion Flo exhibited the highest color change by the 15th day. Coffee and green tea demonstrated the greatest potential for causing color changes in the provisional restorative materials. Conclusion DPI Self-Cure exhibited the highest color stability among the provisional materials, with Vivadent and Oratemp following closely behind. Green tea and coffee were the most potent staining agents, while Pepsi and turmeric induced lesser color changes.

Comparative analysis of shear bond strength of MTA and Theracal PT with different restorative materials.

BACKGROUND: This study aimed to compare the in vitro shear bond strength (SBS) of mineral trioxide aggregate (MTA) and dual-cured, resin-modified calcium silicate material (Theracal PT) to composite resin, compomer, and bulk-fill composite, and to evaluate the bond failure mode under a stereomicroscope. METHODS: Ninety acrylic specimens, each with a 4 mm diameter and 2 mm height central hole, were prepared. These specimens were randomly divided into two groups based on the capping materials: MTA and Theracal PT. Each group was further subdivided into three subgroups (n = 15) according to the restorative materials: composite resin, compomer, and bulk-fill composite. The specimens were then subjected to shear testing using a universal testing machine at a crosshead speed of 1 mm/min. Post-test, the fracture locations were examined using a stereomicroscope. Data were analyzed using a two-way analysis of variance (ANOVA) and the Tukey test. RESULTS: The SBS values for the Theracal PT group were significantly higher than those for the MTA group (p < 0.001). Within the MTA groups, no significant differences were observed in SBS values across the different restorative materials. However, a significant difference was found between the mean SBS values of the Theracal PT + composite resin group and the Theracal PT + compomer group (p < 0.001). CONCLUSIONS: Theracal PT shows promise in dentistry due to its superior bond strength. Given its bond values, Theracal PT appears capable of forming durable and long-lasting restorations by establishing reliable bonds with various restorative materials commonly used in dentistry.

Bacterial adhesion and microleakage of restorative materials for sealing accessory canals in implant prosthesis.

The level of bacterial adhesion and bacterial microleakage in four different materials utilised to seal the access passage of screw retained implant supported prosthesis (SRIP) is of interest to dentists. Four distinct categories were created from the samples on the basis of restorative materials used for sealing access passage in SRIP. Guttapercha and light cured acrylic resin were found to have comparatively low bacterial adhesion and bacterial microleakage in sealing accessory canals in screw retained implant supported prosthesis.

A Fluorescence-based Method to Reaccess Root Canals in Endodontically Treated Teeth: A Micro-Computed Tomography Tridimensional Assessment.

INTRODUCTION: The aim of this study was to evaluate the volume of dentin removal and the volume of remnants of restorative material after the removal of an esthetic restorative coronal set and cervical barrier in endodontically treated mandibular molars with the aid of different magnification methods using 3-dimensional (3D) micro-computed tomographic (micro-CT) morphometric analysis. METHODS: A sample of 30 mandibular first molars (N = 30) was used. All teeth were endodontically treated, and the specimens were initially scanned using micro-CT imaging and reconstructed. The molars were filled by a single-cone technique, and immediately the material at the initial 2-mm cervical level was removed. Cervical barriers were confected using ionomer glass cement with fluorescein 0.1%, filling the 2 mm at the cervical level of the canals and an additional 2 mm as the base. The coronal restoration set was performed using esthetic resin composites. A simulated tooth aging process was performed with 20,000 thermocycling cycles. The sample was distributed into the following 3 groups (n = 10) for the removal of the restoration set and cervical barrier with diamond burs based on the magnification aid: no magnification aid (naked eye), operative microscope aid, and REVEAL device (Design for Vision Inc, Bohemia, NY) aid. After removal, the final 3D micro-CT scanning and reconstruction were conducted with the same parameters as the initial scanning, and superposition of the final and initial scanning was performed. Morphometric analysis was conducted using CTAn software (Bruker microCT, Kontich, Belgium) to assess the volume of remnant restorative material (mm³), the volume of dentin removal (mm³), and the direction and site of dentin removal. Data were analyzed using 1-Way analysis of variance (P < .05). RESULTS: The REVEAL group showed better results regarding the volume of remnant material (3.17 ± 1.65) and the percentage of dentin removal (2.56 ± 1.34). The microscope group showed no statistical difference compared with the REVEAL group regarding dentin removal (3.30 ± 1.48) and was statistically similar to the naked eye group in the volume of remnant material (9.63 ± 4.33). The naked eye group showed the worst results for the volume of remnant material (7.60 ± 2.68) and the percentage of dentin removal (6.60 ± 3.70). CONCLUSIONS: The use of fluorescence associated with magnification was the method that presented the best results, with lower percentages of dentin removal and smaller volumes of remaining restorative material. This is an innovative technology in endodontics that shows potential to overcome the challenge of reaccessing root canals in the context of endodontic retreatment.

Performance of different cone-beam computed tomography scan modes with and without metal artifact reduction in detection of recurrent dental caries under various restorative materials.

Purpose: We aimed to compare the diagnostic performance of different cone-beam computed tomography (CBCT) scan modes with and without the application of a metal artifact reduction (MAR) option under 5 different restorative materials. Material and methods: Our research was an in vitro study with 150 caries-free premolars and molars. The teeth were randomly divided into experimental (with artificially induced caries, n = 75) and control (without caries, n = 75) groups and were prepared based on 5 types of restorative materials, including conventional composites (Filtek Z250, Gradia), flow composite, glass ionomer, and amalgam. The teeth were examined under 2 CBCT scan modes (high-resolution [HIRes] and standard) with and without MAR application. Finally, the diagnostic accuracy index values (area under the receiver operating characteristic curve [AUC], sensitivity, and specificity) were calculated. Results: The AUC of standard scan mode with the MAR option was significantly lower than that of HIRes with MAR (p = 0.018) and without MAR option (p = 0.011) in detecting recurrent caries. Also, without MAR option, the diagnostic accuracy (AUC) of the standard mode was significantly lower than that of the HIRes (p = 0.020). Similar findings were observed for sensitivity and specificity. Moreover, diagnostic performance of standard and HIRes scan modes with and without MAR in the amalgam group was lower than that in other restorative material groups. Conclusions: Diagnostic performance of HIRes CBCT mode was higher than that of standard mode for recurrent caries and remained unaffected by MAR application. However, the accuracy in detecting recurrent caries was lower in the amalgam group compared with other restorative material groups.

Effect of the Different Dietary Supplements on the Average Surface Roughness and Color Stability of Direct Restorative Materials Used in Pediatric Dentistry.

Increased surface roughness and discoloration of the direct restorative materials used in pediatric patients affect the longevity of restorations and impair children's oral health. Many factors can alter these properties. One of these factors is the intake of dietary supplements. It is crucial to predict the properties of restorative materials when exposed to dietary supplements to maintain the dental care of children. Thus, this study aimed to investigate the effect of various syrup-formed dietary supplements on the average surface roughness and color stability of current restorative materials used in pediatric dentistry. Seven different restorative materials (conventional glass ionomer [Fuji IX GP], resin-modified glass ionomer, [Fuji II LC], zirconia-reinforced glass ionomer [Zirconomer Improved], polyacid-modified composite resin [Dyract®XTRA], bulk-fill glass hybrid restorative [Equia Forte HT Fill], conventional resin composite [Charisma Smart], and resin composite with reactive glass fillers [Cention N]) were tested. The specimens prepared from each type of restorative material were divided into five subgroups according to dietary supplements (Sambucol Kids, Resverol, Imunol, Umca, and Microfer). These specimens were immersed daily in supplement solution over a period of 28 days. Surface roughness and color difference measurements were performed at baseline and at the 7th and 28th days. The color difference and Ra values showed that there was an interaction among the type of restorative material, type of dietary supplement, and immersion time factors (p < 0.05). Whereas lower Ra values were found in the composite resin group, the highest Ra values were found in the conventional glass ionomer group. All supplements caused increasing color difference values, and Resverol and Umca showed higher discoloration values above the clinically acceptable threshold. The intake of dietary supplement type, the immersion time of the dietary supplement, and the restorative material type affected the surface roughness and color stability of the tested direct restorative materials. All of the experimental groups showed higher Ra values than clinically acceptable surface roughness values (0.2 µm). The color difference values also increased with the immersion time.

Effect of Child Health Drinks on Color Stability of Various Aesthetic Restorative Materials - An In Vitro Study.

Introduction: In pediatric dentistry, the esthetically pleasing materials have tremendously changed the concept of restorative practice. Aim and Objectives: 1. The aim of the study is to evaluate the effect of child health drinks on color stability of various esthetic restorative materials via spectrophotometric analysis and to identify the esthetic restorative material that is color-stable against child health drinks. Materials and Methods: A total of 120 disk-shaped specimens with a diameter of 12 mm and a thickness of 2 mm were made from a composite (Dyract), giomer (Shofu), and composite (GC). Each group of 40 specimens of each material was divided into four sub-groups. Each sub-group was stored in different solutions, distilled water, Bournvita, Horlicks, and Pediasure, for 60 days. The color change measurement was done using a spectrophotometer both before and after staining. Result: One-way analysis of variance depicted that when the ΔE values of the restorative material were tested against each of the child health drink, there was a statistically significant difference between all child health drinks (P < 0.00001). When restorative materials were compared with the staining agent on 60 days duration, except Pediasure and Control, others (i.e. Horlicks and Bournvita) showed a statistically high significance (P < 0.05). Conclusion: Bournvita caused the highest color changes in 60 days time interval, followed by Horlicks and Pediasure. When the discoloration of several materials is studied, the highest level of discoloration was observed in the compomer, followed by the giomer, and the lowest level in the composite.

The Application of artificial intelligence in restorative Dentistry: A narrative review of current research.

This review explores the transformative impact of artificial intelligence (AI) on restorative dentistry. By discussing the diagnostic processes, treatment planning, image analysis, prosthodontics, and material/biomaterial research, this study highlights the role of AI in optimizing precision and efficiency. It emphasizes personalized material selection, accelerated biomaterial research, and AI-enabled clinical workflows for enhanced patient outcomes. The review concludes with insights into the challenges, ethical considerations, and future trends, emphasizing the collaborative efforts needed for continued innovation in AI-driven restorative dentistry.

Dental restorative materials and halitosis: a preliminaryin-vitrostudy.

Despite the widespread use of dental restorative materials, little information exists in the literature regarding their potential impact on bad breath. This in vitro study aims to fill this gap by investigating the influence of different restorative materials on the release of hydrogen sulfide (H2S). Thirteen diverse dental restorative materials, including composites, flowable composites, glass ionomer restorative materials, high-copper amalgam, and CAD-CAM blocks, were examined. Cellulose Sponge models were used as negative and positive control. All samples were prepared with a diameter of 5 mm and a height of 2 mm. Except for the negative control group, all samples were embedded into Allium cepa L., and the emitted H2S was measured using the Wintact W8802 hydrogen sulfide monitor. Surface roughness's effect on emission was explored by roughening the surfaces of CAD-CAM material samples, and gas emission was measured again. The data were statistically analyzed using the Kruskal-Wallis test and DSCF pairwise comparison tests. Fiber-reinforced flowable composite (EverX Flow), amalgam (Nova 70-caps), and certain composite materials (IPS Empress Direct, Tetric Evoceram, Admira Fusion X-tra) released higher H2S concentrations compared to the negative control. The H2S release period lasted longer in the same materials mentioned above, along with G-aenial Universal Injectable. Indirectly used materials, such as GC Cerasmart, Vita Enamic, and Vita YZ HT, demonstrated significantly lower emissions compared to other direct restoratives. Importantly, the surface roughness of indirect materials did not significantly affect peak H2S concentrations or release times. The study reveals variations in H2S release among restorative materials, suggesting potential advantages of indirect restorative materials in reducing H2S-induced halitosis. This comprehensive understanding of the relationship between restorative materials and halitosis can empower both dental professionals and patients to make well-informed treatment choices. Notably, there is evidence supporting the enhanced performance of indirect restorative materials for individuals affected by halitosis.

In Vitro Analysis of Outcome Differences Between Repairing and Replacing Broken Dental Restorations.

Objective In light of several advancements and considerations in endodontic dentistry, there still remains a need to comprehensively evaluate the outcome disparities between repairing and replacing broken dental restorations. This study aims to compare the effectiveness of repairing dental restorations versus replacing them, focusing on how each method affects the structural strength and longevity of the restorations. Methods The study included 60 freshly removed human maxillary premolars. Initial processing involved rigorous washing, descaling, and polishing of the teeth. To ensure preservation, the specimens were stored in sterile, distilled water. To occlude the root canals, a self-hardening composite resin was used, and the roots were coated with two coats of clear nail polish to prevent moisture penetration. A 245 carbide bur attached to a high-speed dental handpiece with air and water spray cooling produced standardized Class II cavities on the occluso-proximal surfaces. Each cavity had a buccolingual breadth of 2 mm, an occluso-cervical length of 4 mm, and a gingival boundary that was 1 mm coronal to the cement-enamel junction. Following this preparation, the teeth were randomly separated into three groups (Group A, Group B, and Group C), each containing 20 teeth. Results Our analysis showed that teeth with entirely replaced restorations had a higher average fracture resistance than those with repaired restorations. However, the difference in fracture resistance between the repair and replacement groups for each type of material was not statistically significant. Conclusion Based on the findings, repairing a dental restoration can be a conservative and less invasive alternative to a full replacement without a significant compromise in the restoration's ability to withstand fracture. Therefore, dental professionals might consider full restoration as a viable option, taking into account the need to preserve dental tissue as well as the restoration's durability and structural integrity.

Comparative Assessment of Marginal Micro Leakage of Different Esthetic Restorative Materials Used on Primary Teeth: An In-vitro Study.

AIM: The aim of the current investigation was to evaluate the marginal microleakage of various esthetic restorative materials applied to primary teeth. MATERIALS AND METHODS: A total of 75 noncarious primary molars that were removed for orthodontic intervention and teeth nearing exfoliation were chosen. One millimeter (mm) above the cementoenamel junction, on the buccal surface of the teeth, Class V cavities were prepared. William's graded periodontal probe was used to standardize cavity preparation on all teeth. 3 mm was the cavity's length, 2 mm in width, and 2 mm in depth. The teeth were then divided into three groups (25 samples in each group) according to the type of esthetic restorative material used. Group I: Resin-modified glass ionomer cement, Group II: Ormocer, Group III: Giomer. The samples underwent 500 cycles of thermocycling, with an immersion time of 60 seconds and a well time of 15 seconds, between 5 and 55°C. The samples were submerged in methylene blue dye for 24 hours at room temperature and dried. The samples were then divided into sections and examined with a stereomicroscope. Data was recorded and statistically analyzed. RESULTS: The least marginal microleakage was found in the ormocer group (1.22 ± 0.01) followed by resin-modified glass ionomer cement group (1.31 ± 0.07) and the giomer group (1.78 ± 0.03). There was a highly statistically significant difference found between resin-modified glass ionomer cement group and the ormocer group, resin-modified glass ionomer cement group and giomer group. And no significant difference was found between the ormocer group and the giomer group. CONCLUSION: The present study concluded that there was some amount of microleakage in primary teeth in all restorative materials examined in this in-vitro investigation. However, the marginal sealing ability of ormocer was found highest compared to resin-modified glass ionomer cement and Giomer materials. CLINICAL SIGNIFICANCE: The primary reason dental restorations fail, particularly in Class V cavities, is microleakage since the margins of these restorations are typically found in the dentin or cementum. Assessing microleakage is a crucial step in determining the marginal integrity of restorative materials. Developing methods and resources that reduce the adverse effects caused by the restorative marginal seal failing would benefit from this. How to cite this article: Al Ghwainem A, Alqarni AS. Comparative Assessment of Marginal Micro Leakage of Different Esthetic Restorative Materials Used on Primary Teeth: An In-vitro Study. J Contemp Dent Pract 2024;25(1):58-61.

Influence of Specimen Dimension, Water Immersion Protocol, and Surface Roughness on Water Sorption and Solubility of Resin-Based Restorative Materials.

The evaluation of water sorption and solubility is pivotal for the development of new resin-based restorative materials with the potential for clinical application. The purpose of the present study was to evaluate the influence of the specimen dimension, water immersion protocol, and surface roughness on the water sorption and solubility of three resin-based restorative materials. Disk-shaped specimens of 15 mm × 1 mm, 10 mm × 1 mm, and 6 mm × 1 mm were produced with a composite resin (Z100), a resin cement (RelyX ARC), and an adhesive system (Single Bond 2-SB2). The specimens were immersed in distilled water according to four protocols: ISO (all the specimens for each group were vertically immersed in 50 mL); IV-10 (the specimens were individually and vertically immersed in 10 mL); IH-10 (the specimens were individually and horizontally immersed in 10 mL); and IH-2 (the specimens were individually and horizontally immersed in 2 mL). The surface roughness (Sa and Sp) was evaluated using an atomic force microscope, and the degree of conversion was determined using FT-IR spectrometry. The specimen dimension and water immersion protocol had no effect on water sorption and solubility. For the three resin-based restorative materials, Sp was higher than Sa. The degree of conversion was not influenced by the specimen dimension. The variations in the specimen dimension and water immersion protocol compared to those determined by ISO 4049 did not prevent the comparison between the values of water sorption and solubility obtained for a given resin-based restorative material.

The Surface Roughness of Contemporary Indirect CAD/CAM Restorative Materials That Are Glazed and Chair-Side-Finished/Polished.

The surface roughness (Ra) of indirect computer-aided design/computer-aided manufacturing (CAD/CAM)-fabricated dental restorations is crucial for their long-term durability. This study intended to evaluate the Ra of five different types of contemporary indirect CAD/CAM restorative materials with varying compositions that were glazed and finished/polished. A total of 75 specimens, disc-shaped (10 mm × 2 mm), were obtained from five materials (n = 15) (Tetric CAD, IPS e.max CAD, IPS e.max ZirCAD, CELTRA Duo, and Vita Enamic) and fabricated by CAD/CAM. One of the two surfaces for each specimen was subjected to glazing, while the other surface was subjected to finishing/polishing. The Ra of the two surfaces in micrometers (µm) was evaluated using a Profilometer, while the surface topography was examined using a scanning electron microscope. Using SPSS, the Kruskal-Wallis, post hoc Conover, and Mann-Whitney tests were used to statistically evaluate the data. A comparison of the Ra for the finished/polished surfaces of the five test materials showed significant differences (p < 0.0001). Among the finished/polished surfaces, the mean rank values of Vita Enamic were significantly higher than the other four test materials (p < 0.0001). A comparison of the Ra of glazed surfaces among the five study materials revealed significant differences (p < 0.0001). The Ra for the IPS e.max ZirCAD material was significantly higher than the rest of the four materials (p < 0.001). A comparison of the Ra for two types of surface conditioning within each of the five test materials showed a significant difference (p < 0.05). Only for IPS e.max ZirCAD was the Ra of the glazed surface significantly higher than the finished/polished surface (p < 0.0001). Significant variations in the surface roughness (Ra) were exhibited between the finished/polished and glazed surfaces of the five test materials. Hybrid ceramics showed the highest Ra values for the finished/polished surfaces, and zirconia exhibited the highest Ra values among the glazed surfaces among the tested materials. The Ra values of either finished/polished or glazed surfaces of the test materials were within the clinically acceptable range (0.2-0.5 µm), except for the glazed surface of the zirconia ceramics (0.84 µm).

High-Performance Dental Resins Containing a Starburst Monomer.

Dimethacrylate-based chemistries feature extensively as resin monomers in dental resin-based materials due to their distinguished overall performance. However, challenges endure, encompassing inadequate mechanical attributes, volumetric shrinkage, and estrogenicity. Herein, we first synthesized a novel resin monomer, 9-armed starburst polyurethane acrylate (NPUA), via the grafting-onto approach. Compared to the primary commercial dental monomer 2,2-bis [p-(2'-hydroxy-3'-methacryloxypropoxy) phenyl] propane (Bis-GMA) (with a viscosity of 1,174 ± 3 Pa·s and volumetric shrinkage of 4.7% ± 0.1%), the NPUA monomer achieves the lower viscosity (158 ± 1 Pa·s), volumetric shrinkage (2.5% ± 0.1%), and cytotoxicity (P < 0.05). The NPUA-based resins exhibit the higher flexural strength, flexural modulus, hardness, and hydrophobicity and lower volumetric shrinkage, water absorption, and solubility compared to the Bis-GMA (70 wt%)/TEGDMA (30 wt%) resins. The NPUA-based composites exhibit significantly higher flexural strength, flexural modulus, and hardness and lower volumetric shrinkage (171.4 ± 3.0 MPa, 12.6 ± 0.5 GPa, 2.0 ± 0.2 GPa, and 3.4% ± 0.2%, respectively) compared to the Bis-GMA group (120.3 ± 4.7 MPa, 9.4 ± 0.7 GPa, 1.5 ± 0.1 GPa, and 4.7% ± 0.2%, respectively; P < 0.05). This work presents a viable avenue for augmenting the physicochemical attributes of dental resins.

The effect of various inhaled asthma medications on the color stability of paediatric dental restorative materials.

BACKGROUND: The purpose of the study is to analyse the effects of different inhaled asthma medications (IAMs) on the color change of dental restorative materials (DRMs). METHODS: In total, 192 samples were taken from six different DRMs: [Filtek Z550 (nanohybrid composite), Fusio Liquid Dentin (Self-adhering flowable composite), Filtek Ultimate (nanofilled flowable composite), Dyract XP (compomer), Fuji II LC (resin-modified glass ionomer), Fuji IX Fast (self-cured-packable glass ionomer), (n = 32)]. After the initial color values (CIELab) of DRMs were measured by using a spectrophotometer, each sample was exposed to the same IAMs via nebulizer according to the four different inhaled therapies and measurements were repeated on the 7th & 21st days. RESULTS: In all IAM groups, DRM with the least amount of ΔE was nanohybrid composite, while the highest ΔE was found in Fuji II LC. Among all experimental groups, only Fuji II LC which was administered the combined medication, exceeded the clinically unacceptable threshold (ΔE = 3.3) on 7th & 21st days. CONCLUSIONS: Consequently, important factors affecting the susceptibility to color stability are the type of IAMs, the administration time-dosage, and the type of DRMs.