Small airways response to bronchodilators as the marker of the uncontrolled asthma in children.

OBJECTIVE: Aim: To develop the criteria of small airways response to bronchodilators (by spirometry indices maximal expiratory flow (MEF50 and MEF25) as the markers of uncontrolled asthma course. PATIENTS AND METHODS: Materials and Methods: The study involved 92 participants (64 boys and 28 girls) aged 6 to 17 years (60 were less than 12 years old) with diagnosed asthma. Asthma control was assessed with the use of Asthma Control Test and Asthma Control Questionnaire. Spirometry and bronchodilator responsiveness testing were performed for all participants. RESULTS: Results: Mostly, the studied children had a normal level of forced expiratory volume in the first second (FEV1), even at unsatisfactory symptoms control. The indicators of the medium and small airways patency were significantly worse in uncontrolled asthma children even in normal FEV1. Among children, the lack of asthma control can be caused by small airways obstruction in up to 80% cases. Among children who need the high dose inhaled corticosteroids treatment 93.3% have uncontrolled asthma with small airways obstruction. We found out that MEF50 and MEF25 could be the signs of the reversibility of bronchial obstruction and uncontrolled asthma with high sensitivity and specificity. CONCLUSION: Conclusions: Indices MEF50 and MEF25 allow detecting the small airways obstruction and their reversibility as a mark of uncontrolled asthma (MEF25 has a higher diagnostic value). In case of MEF50 and/or MEF25 increasing for 22% or 25% accordingly in bronchodilator test in children, the asthma should be considered uncontrolled.

Spatial Confinement of Lithium Borohydride in Bimetallic CoNi-Doped Hollow Carbon Frameworks for Stable Hydrogen Storage.

While lithium borohydride is one of the most promising hydrogen storage materials due to its ultrahigh hydrogen storage density, high thermodynamic stability, kinetic barriers, and poor reversibility, it is far from being used in practical applications. Herein, we prepare a cubic hollow carbon dodecahedron uniformly modified with a bimetallic CoNi alloy (CoNi/NC) for preserving the stable catalytic effect of CoNi alloys toward reversible hydrogen storage. It is theoretically confirmed that bimetallic CoNi alloys effectively weaken the B-H bonds of LiBH4 by extending their average length to 1.33, 0.09 and 0.04 Å longer than that of LiBH4 and LiBH4 under metallic Co, respectively. More importantly, the alloying of Co with Ni avoids the reattachment of H from LiBH4 to the Co surface, which prevents LiBH4 from dehydrogenation for the formation of H2 on the Co surface, thus resulting in an ultralow hydrogen desorption energy of 0.1, 1.85 and 0.52 eV lower than that of LiBH4 and LiBH4 under metallic Co. Therefore, the onset and peak hydrogen desorption temperatures decrease to 130 and 355 °C, respectively, 170 and 97 °C lower than that of bulk LiBH4. More importantly, a reversible H2 capacity of 9.4 wt % is achieved even after 10 cycles.

Inhibition of monoamine oxidases and neuroprotective effects: chalcones vs. chromones.

Eighteen compounds derived from two sub-series, (HC1-HC9) and (HF1-HF9), were synthesized and evaluated for their inhibitory activities against monoamine oxidase (MAO). HC (chalcone) series showed higher inhibitory activity against MAO-B than against MAO-A, whereas the HF (chromone) series showed reversed inhibitory activity. Compound HC4 most potently inhibited MAO-B with an IC50 value of 0.040 µM, followed by HC3 (IC50 = 0.049 µM), while compound HF4 most potently inhibited MAO-A (IC50 = 0.046 µM), followed by HF2 (IC50 = 0.075 µM). The selectivity index (SI) values of HC4 and HF4 were 50.40 and 0.59, respectively. Structurally, HC4 (4-OC2H5 in B-ring) showed higher MAO-B inhibition than other derivatives, suggesting that the -OC2H5 substitution of the 4-position in the B-ring contributes to the increase of MAO-B inhibition, especially -OC2H5 (HC4) > -OCH3 (HC3) > -F (HC7) > -CH3 (HC2) > -Br (HC8) > -H (HC1) in order. In MAO-A inhibition, the substituent 4-OC2H5 in the B-ring of HF4 contributed to an increase in inhibitory activity, followed by -CH3 (HF2), -F (HF7), -Br (HF8), -OCH3 (HF3), and-H (HF1). In the enzyme kinetics and reversibility study, the Ki value of HC4 for MAO-B was 0.035 ± 0.005 µM, and that of HF4 for MAO-A was 0.035 ± 0.005 µM, and both were reversible competitive inhibitors. We confirmed that HC4 and HF4 significantly ameliorated rotenone-induced neurotoxicity, as evidenced by the reactive oxygen species and superoxide dismutase assays. This study also supports the significant effect of HC4 and HF4 on mitochondrial membrane potential in rotenone-induced toxicity. A lead molecule was used for molecular docking and dynamic simulation studies. These results show that HC4 is a potent selective MAO-B inhibitor and HF4 is a potent MAO-A inhibitor, suggesting that both compounds can be used as treatment agents for neurological disorders.

Modulating Enzyme Activity using Engineered Nanomaterials.

Enzymes serve as pivotal components in various biotechnological applications across several industries. Understanding enzyme inhibition sheds light on how certain compounds disrupt biochemical pathways, facilitating the design of targeted drugs for combating diseases. On the other hand, reversible inhibition or enhancement of activity can unlock new ways of controlling industrial reactions and boosting the catalytic activity of native enzymes that are taken out of their natural environments. Over the last two decades, immobilizing enzymes on nanomaterial-based solid supports has emerged as an especially promising approach for tuning enzyme activity. Nanomaterials not only inhibit enzymes but also enhance their performance, showcasing their versatility.  This Concept highlights significant advancements in utilizing nanomaterials for enzyme modulation and discusses future prospects for leveraging this phenomenon in developing sophisticated molecular systems and downstream applications.

Branched Oligomer-Based Reversible Adhesives Enabled by Controllable Self-Aggregation.

Supramolecular adhesion material systems based on small molecules have shown great potential to unite the great contradiction between strong adhesion and reversibility. However, these material systems suffer from low adhesion strength/narrow adhesion span, limited designability, and single interaction due to fewer covalent bond content and action sites in small molecules. Herein, an ultrahigh-strength and large-span reversible adhesive enabled by a branched oligomer controllable self-aggregation strategy is developed. The dense covalent bonds present in the branched oligomers greatly enhance adhesion strength without compromising reversibility. The resulting adhesive exhibits a large-span reversible adhesion of ≈140 times, switching between ultra-strong and tough adhesion strength (5.58 MPa and 5093.92 N m-1) and ultralow adhesion (0.04 MPa and 87.656 N m-1) with alternating temperature. Moreover, reversible dynamic double cross-linking endows the adhesive with stable reversible adhesion transitions even after 100 cycles. This reversible adhesion property can also be remotely controlled via a voltage of 8 V, with a loading voltage duration of 45 s. This work paves the way for the design of reversible adhesives with long-span outstanding properties using covalent polymers and offers a pathway for the rational design of high-performance adhesives featuring both robust toughness and exceptional reversibility.

Emerging Perspectives on Neuroprotection.

Neuroprotection aims to safeguard neurons from damage caused by various factors like stress, potentially leading to the rescue, recovery, or regeneration of the nervous system and its functions [J Clin Neurosci. 2002;9(1):4-8]. Conversely, neuroplasticity refers to the brain's ability to adapt and change throughout life, involving structural and functional alterations in cells and synaptic transmission [Neural Plast. 2014;2014:541870]. Neuroprotection is a broad and multidisciplinary field encompassing various approaches and strategies aimed at preserving and promoting neuronal health. It is a critical area of research in neuroscience and neurology, with the potential to lead to new therapies for a wide range of neurological disorders and conditions. Neuroprotection can take various forms and may involve pharmacological agents, lifestyle modifications, or behavioral interventions. Accordingly, also the perspective and the meaning of neuroprotection differs due to different angles of interpretation. The primary interpretation is from the pharmacological point of view since the most consistent data come from this field. In addition, we will discuss also alternative, yet less considered, perspectives on neuroprotection, focusing on specific neuroprotective targets, interactions with surrounding microglia, different levels of neuroprotective effects, the reversive/adaptative dimension, and its use as anticipatory/prophylactic intervention.

Improved Electrochemical Performance of NASICON Type Na3V2-xCox(PO4)3/C (x = 0-0.15) Cathode for High Rate and Stable Sodium-Ion Batteries.

In recent years, the Na-ion SuperIonic CONductor (NASICON) based polyanionics are considered pertinent cathode materials in sodium-ion batteries due to their 3D open framework, which can accommodate a wide range of Na content and can offer high ionic conductivity with great structural stability. However, owing to the inferior electronic conductivity, these materials suffer from unappealing rate capability and cyclic stability for practical applications. Therefore, in this work we investigate the effect of Co substitution at the V site on the electrochemical performance and diffusion kinetics of Na3V2-xCox(PO4)3/C (x = 0-0.15) cathodes. All the samples are characterized through Rietveld refinement of the X-ray diffraction patterns, Raman spectroscopy, transmission electron microscopy, etc. We demonstrate improved electrochemical performance for the x = 0.05 electrode with a reversible capacity of 105 mAh g-1 at 0.1 C. Interestingly, the specific capacity of 80 mAh g-1 is achieved at 10 C with retention of about 92% after 500 cycles and 79.5% after 1500 cycles and having nearly 100% Coulombic efficiency. The extracted diffusion coefficient values through the galvanostatic intermittent titration technique and cyclic voltammetry are found to be in the range of 10-9 to 10-11 cm2 s-1. The post-mortem studies show excellent structural and morphological stability after testing for 500 cycles at 10 C. Our study reveals the role of optimal dopant of Co3+ ions at the V site in improving the cyclic stability at a high current rate.

The role and mechanism of thrombospondin-4 in pulmonary arterial hypertension associated with congenital heart disease.

BACKGROUND: Due to a special hemodynamic feature, pulmonary vascular disease in pulmonary arterial hypertension associated with congenital heart disease (PAH-CHD) has two stages: reversible and irreversible. So far, the mechanism involved in the transition from reversible to irreversible stage is elusive. Moreover, no recognized and reliable assessments to distinguish these two stages are available. Furthermore, we found that compared with control and reversible PAH, thrombospondin-4 (THBS4) was significantly upregulated in irreversible group by bioinformatic analysis. Hence, we further verify and investigate the expression and role of THBS4 in PAH-CHD. METHODS: We established the monocrotaline plus aorto-cava shunt-induced (MCT-AV) rat model. We measured the expression of THBS4 in lung tissues from MCT-AV rats. Double immunofluorescence staining of lung tissue for THBS4 and α-SMA (biomarker of smooth muscle cells) or vWF (biomarker of endothelial cells) to identify the location of THBS4 in the pulmonary artery. Primary pulmonary artery smooth muscle cells (PASMCs) were cultivated, identified, and used in this study. THBS4 was inhibited and overexpressed by siRNA and plasmid, respectively, to explore the effect of THBS4 on phenotype transformation, proliferation, apoptosis, and migration of PASMCs. The effect of THBS4 on pulmonary vascular remodeling was evaluated in vivo by adeno-associated virus which suppressed THBS4 expression. Circulating level of THBS4 in patients with PAH-CHD was measured by ELISA. RESULTS: THBS4 was upregulated in the lung tissues of MCT-AV rats, and was further upregulated in severe pulmonary vascular lesions. And THBS4 was expressed mainly in PASMCs. When THBS4 was inhibited, contractile markers α-SMA and MYH11 were upregulated, while the proliferative marker PCNA was decreased, the endothelial-mensenchymal transition marker N-cad was downregulated, proapototic marker BAX was increased. Additionally, proliferation and migration of PASMCs was inhibited and apoptosis was increased. Conversely, THBS4 overexpression resulted in opposite effects. And the impact of THBS4 on PASMCs was probably achieved through the regulation of the PI3K/AKT pathway. THBS4 suppression attenuated pulmonary vascular remodeling. Furthermore, compared with patients with simple congenital heart disease and mild PAH-CHD, the circulating level of THBS4 was higher in patients with severe PAH-CHD. CONCLUSIONS: THBS4 is a promising biomarker to distinguish reversible from irreversible PAH-CHD before repairing the shunt. THBS4 is a potential treatment target in PAH-CHD, especially in irreversible stage.

Real time monitoring of nerve agent mimics: Novel solid state emitter for enhanced precision and reliability.

Chemical nerve agents are hazardous compounds that terrorists can exploit to pose a significant threat to public safety and national security. The nucleophilic behaviour of these agents enables their interaction with acetyl cholinesterase in the body, leading to paralysis and potentially fatal consequences. Therefore, developing robust and efficient detection methods for these agents is crucial for preventing their misuse. In this manuscript, (E)-12-(1-hydrazineylideneethyl)benzo[f]pyrido[1,2-a]indole-6,11-dione (HBID) is developed as a novel colorimetric and fluorometric probe for the detection of specific chemical nerve agent simulants in both liquid and vapor phase. HBID reacts rapidly with diethyl chlorophosphate (DCP), a common nerve agent simulant, leading to a significant increase in the fluorescence intensity. Under optimized conditions, HBID exhibits high sensitivity, good recyclability, fast response and low limit of detection (0.092 µM). NMR and mass spectral studies suggest that the reaction involves the nucleophilic addition of HBID to DCP, forming a phosphate ester. Additionally, the developed sensor demonstrates viscosity-sensitive AIE phenomena thus greatly expanding its potential applications in biological systems. This sensitivity enables precise detection and visualization of viscosity changes within cellular environments, making the sensor an invaluable tool for studying complex biological processes. The developed probe also detects pH within biologically relevant range (4-6). In practical applications, the probe-treated strips efficiently detected DCP vapor in real time, showing a noticeable fluorescence response. Further, the probe has a strong potential to detect the presence of DCP in the soil samples.

Jointly Improving Anionic-Cationic Redox Reversibility of Lithium-Rich Manganese-Based Cathode Materials by N Surface Doping.

The lithium-rich manganese-based layer oxide (LRMO) with high specific capacity (∼300 mAh g-1) and economic feasibility is accepted as the cathode material for high energy density rechargeable batteries. Accompanied by the additional anionic redox reactions during the initial charging process, LRMO presents oxygen release, sluggish Li+ diffusion, and irreversible transition metal ion (TM) migration, which is responsible for its severe structural deterioration and rapid capacity/voltage decay. Here, the N doping strategy is proposed via feasible treatment of oxygen-vacancy-containing Li1.16Ni0.21Mn0.63O2-δ (LNMO) particles. The as obtained LNMO-N samples demonstrate doping N, partially reduced Mn/Ni cations, and oxygen vacancies on the surface. The DFT calculations and experimental results demonstrate that N replacing the crystal oxygen sites on the surface reduces the energy barrier for diffusion, thereby enhancing the kinetics of Li+ diffusion and improving the reversibility of transition metal migration. Furthermore, N doping induces stacking faults and a more flexible structure. Therefore, LNMO-N exhibits a significantly improved anionic-cationic redox reaction reversibility with a high discharge specific capacity of 296.6 mAh g-1 at 20 mA g-1 within the range of 2.0 to 4.8 V and an impressive initial Coulombic efficiency of 85.9%. Moreover, the rate capability is obviously improved with a remarkable capacity of 215.1 mAh g-1 at 200 mA g-1 in 200 cycles with a capacity retention of 72.52% and exceptional performance of 141.4 mAh g-1 even at a higher current density of 1000 mA g-1.

Dynamic Covalent Bond-Based Polymer Chains Operating Reversibly with Temperature Changes.

Dynamic bonds can facilitate reversible formation and dissociation of connections in response to external stimuli, endowing materials with shape memory and self-healing capabilities. Temperature is an external stimulus that can be easily controlled through heat. Dynamic covalent bonds in response to temperature can reversibly connect, exchange, and convert chains in the polymer. In this review, we introduce dynamic covalent bonds that operate without catalysts in various temperature ranges. The basic bonding mechanism and the kinetics are examined to understand dynamic covalent chemistry reversibly performed by equilibrium control. Furthermore, a recent synthesis method that implements dynamic covalent coupling based on various polymers is introduced. Dynamic covalent bonds that operate depending on temperature can be applied and expand the use of polymers, providing predictions for the development of future smart materials.

Impacts and Correlations on Corneal Biomechanics, Corneal Optical Density and Intraocular Pressure after Cataract Surgery.

The study aimed to investigate the extended effects and interrelations of corneal biomechanics, corneal optical density (COD), corneal thickness (CT), and intraocular pressure (IOP) following cataract surgery. Sixteen eyes were analyzed prospectively. The Corneal Visualization Scheimpflug Technology (Corvis ST) device assessed corneal biomechanics, while the Pentacam AxL® (Pentacam) measured COD and CT. Postoperative data were collected around six months after surgery, with a subgroup analysis of data at nine months. The Pearson correlation was used to examine the relationship between surgical-induced changes in corneal biomechanics and COD. At six months, significant postoperative differences were observed in various biomechanical indices, including uncorrected IOP (IOPuct) and biomechanics-corrected IOP (bIOP). However, many indices lost statistical significance by the nine-month mark, suggesting the reversibility of postoperative corneal changes. Postoperative COD increased at the anterior layer of the 2-6 mm annulus and incision site. The changes in COD correlated with certain biomechanical indices, including maximal (Max) deformative amplitude (DA) and stiffness parameter (SP). In conclusion, despite significant immediate postoperative changes, corneal biomechanics, COD, and IOP experienced a gradual recovery process following cataract surgery. Clinicians should maintain vigilance for any unusual changes during the short-term observation period to detect abnormalities early.

Structure, characterization, and application of a novel thermoreversible emulsion gel fabricated by citrate agar.

A novel thermoreversible emulsion gel was successfully prepared with citrate agar (CA) as the sole emulsifier. Compared with native agar gel emulsion, CA gel emulsion (CAGE) formed a stable emulsion gel when the CA concentration was increased to 1.25 % (w/w). Results of time-temperature scanning experiments showed that the emulsion gel rapidly transformed into liquid emulsion when heated to 40-50 °C and then solidified into emulsion gel after cooling to the critical temperature of solidification. The emulsion gel had stable sol-gel transformation ability after seven cycles repeated heating-cooling treatment (HCT) at 85 °C and 4 °C. However, the stability of emulsion gels gradually decreased because of the large-droplet formation during heating, which affected the CA molecular-reconfiguration network structure in cooling. The conjunction analysis of microstructure and properties of the emulsion gel indicated that its stability depended primarily on the spatial repulsion and electrostatic repulsion provided by CA gel, and the main factor driving thermal reversibility was the temperature-responsive gelation performance of CA. The retention of quercetin was >90.23 % after seven HCTs because CAGEG enhanced the homogeneity and stability of the droplets.

Universal Strike-Plating Strategy to Suppress Hydrogen Evolution for Improving Zinc Metal Reversibility.

The development of highly reversible zinc (Zn) metal anodes is pivotal for determining the feasibility of rechargeable aqueous Zn batteries. Our research quantitively evalulates how the hydrogen evolution reaction (HER) adversely affects Zn reversibility in batteries and emphasizes the importance of substrate design in modulating HER and its associated side reactions. When the cathodic reaction is dominated by HER, the Zn electrode exhibits low plating/stripping efficiency, characterized by extensive coverage of a passivation layer that encompasses the electrochemical inactive Zn. Therefore, we propose a strike-plating strategy that modifies the pristine substrate by initiating Zn plating at a high current density for a short time. This straightforward and effective approach has been proven to suppress hydrogen evolution and transform the electrodeposition mode into one dominated by Zn reduction. Notably, Zn metal exhibits exceptionally high average reversibility of 98.80% over 200 h on a stainless steel substrate, which was typically precluded in aqueous electrolytes because of their favorable HER capability. Additionally, our strike-plating strategy demonstrates an appliable pathway to achieve high Zn reversibility on Cu substrate, showing an average efficiency of 99.83% over 540 h at a high areal capacity of 10 mAh cm-2 and high-performance Zn full cells with low N/P ratios. This research provides a foundation for future investigations into the underlying mechanisms of HER and strategies to optimize Zn-based battery performance.

A Dual Salt/Dual Solvent Electrolyte Enables Ultrahigh Utilization of Zinc Metal Anode for Aqueous Batteries.

Rechargeable aqueous zinc batteries are promising in next-generation sustainable energy storage. However, the low zinc (Zn) metal anode reversibility and utilization in aqueous electrolytes due to Zn corrosion and poor Zn2+ deposition kinetics significantly hinder the development of Zn-ion batteries. Here, a dual salt/dual solvent electrolyte composed of Zn(BF4)2/Zn(Ac)2 in water/TEGDME (tetraethylene glycol dimethyl ether) solvents to achieve reversible Zn anode at an ultrahigh depth of discharge (DOD) is developed. An "inner co-salt and outer co-solvent" synergistic effect in this unique dual salt/dual solvent system is revealed. Experimental results and theoretical calculations provide evidence that the ether co-solvent inhibits water activity by forming hydrogen bonding with the water and coordination effects with the proton in the outer Zn2+ solvation structure. Meanwhile, the anion of zinc acetate co-salt enters the inner Zn2+ solvation structure, thereby accelerating the desolvation kinetics. Strikingly, based on the electrolyte design, the zinc anode shows high reversibility at an ultrahigh utilization of 60% DOD with 99.80% Coulombic efficiency and 9.39 mAh cm-2 high capacity. The results far exceed the performance reported in electrolyte design work recently. The work provides fundamental insights into inner co-salt and outer co-solvent synergistic regulation in multifunctional electrolytes for reversible aqueous metal-ion batteries.

Highly Efficient and Reversible Carbon Dioxide Capture by Carbanion-Functionalized Ionic Liquids.

Due to the active unstable nature of carbon anions, it is challenging to develop carbanion-functionalized ionic liquids (ILs) for efficient and reversible carbon dioxide (CO2) capture. Here, a series of carbanion-based ILs with large conjugated structures were designed and a promising system was achieved through tuning the nucleophilicity of carbanions and screening the cation. The ideal carbanion-functionalized IL trihexyl(tetradecyl)phosphonium N,N-diethycyanoacetoamide ([P66614][DECA]) showed equimolar chemisorption of CO2 (up to 0.98 mol CO2 /mol IL) under ambient pressure and excellent absorption rate. What's more, the combined CO2 can be released easily, leading to excellent reversibility due to high stability of anion conjugated structures. More importantly, the presence of water had negligible effect on the absorption capacity, which makes it potential to be applied to the CO2 capture in industrial flue gas. The chemisorption mechanism of the carbanion and CO2 was confirmed by spectroscopic investigations and DFT calculations, where carboxylic acid product was formed through proton transfer after the carbanions reacted with CO2. Considering that high capacity, quick rate as well as excellent reversibility, these carbanion-functionalized IL should certainly represent competitive candidates for further scale up and practical application in CO2 capture.

Reproductive potential and implant loss in female hamadryas baboons (Papio hamadryas) previously contracepted with melengestrol acetate contraceptive implants at AZA institutions.

Melengestrol acetate (MGA) implants are a progestin-based reversible contraceptive used to manage fertility in animals. MGA implants are recommended for replacement every 2 years; however, reproduction may be suppressed longer if implants are not removed. In this study, we investigated whether the probability of reproducing (pR) differed among nonimplanted females, females with MGA implants removed, and females whose implants were not removed. In addition, since implant loss in hamadryas baboons is a concern, we explored whether female age, institution, implant placement year, implant location, or implant placement type (intramuscular vs. subcutaneous) differed for females whose implants were lost compared to those that were not. The pR differed significantly across all three treatment conditions with the nonimplanted group having the highest pR. The pR plateaued at 63% after 40 months for the implant-removed group compared to 96% after 84 months in the nonimplanted group. There was no reproduction after contraception if implants were not removed (7.83-45.53 months). In the nonimplanted group, pR was significantly higher for older and parous females. In terms of implant loss, we found that implant placement type was significantly associated with implant loss, such that there were fewer losses when implants were placed intramuscularly (IM) as compared to subcutaneously. Our results suggest that placing MGA implants IM is likely to reduce loss. When loss is prevented, MGA implants are an effective form of contraception and are reliably reversibly in most individuals when removed. However, if not removed, they can prevent reproduction longer than 2 years.

Protein Interfacial Gelation toward Shuttle-Free and Dendrite-Free Zn-Iodine Batteries.

Aqueous zinc-iodine (Zn-I2) batteries hold potential for large-scale energy storage but struggle with shuttle effects of I2 cathodes and poor reversibility of Zn anodes. Here, an interfacial gelation strategy is proposed to suppress the shuttle effects and improve the Zn reversibility simultaneously by introducing silk protein (SP) additive. The SP can migrate bidirectionally toward cathode and anode interfaces driven by the periodically switched electric field direction during charging/discharging. For I2 cathodes, the interaction between SP and polyiodides forms gelatinous precipitate to avoid the polyiodide dissolution, evidenced by excellent electrochemical performance, including high specific capacity and Coulombic efficiency (CE) (215 mAh g-1 and 99.5% at 1 C), excellent rate performance (≈170 mAh g-1 at 50 C), and extended durability (6000 cycles at 10 C). For Zn anodes, gelatinous SP serves as protective layer to boost the Zn reversibility (99.7% average CE at 2 mA cm-2) and suppress dendrites. Consequently, a 500 mAh Zn-I2 pouch cell with high-loading cathode (37.5 mgiodine cm-2) and high-utilization Zn anode (20%) achieves remarkable energy density (80 Wh kg-1) and long-term durability (>1000 cycles). These findings underscore the simultaneous modulation of both cathode and anode and demonstrate the potential for practical applications of Zn-I2 batteries.

Substitution-Induced Mechanistic Switching in SNAr-Warheads for Cysteine Proteases.

The aim of this study was to investigate the transition from non-covalent reversible over covalent reversible to covalent irreversible inhibition of cysteine proteases by making delicate structural changes to the warhead scaffold. To this end, dipeptidic rhodesain inhibitors with different N-terminal electrophilic arenes as warheads relying on the SNAr mechanism were synthesized and investigated. Strong structure-activity relationships of the inhibition potency, the degree of covalency, and the reversibility of binding on the arene substitution pattern were found. The studies were complemented and substantiated by molecular docking and quantum-mechanical calculations of model systems. Furthermore, the improvement in the membrane permeability of peptide esters in comparison to their corresponding carboxylic acids was exemplified.

Constructing Reversible Li Deposition Interfaces by Tailoring Lithiophilic Functionalities of a Heteroatom-Doped Graphene Interlayer for Highly Stable Li Metal Anodes.

Lithium (Li) metal has been regarded as the ideal anode for rechargeable batteries due to its low reduction potential and high theoretical capacity. However, the formation of fatal Li dendrites during repeated cycling shortens the battery life and causes serious safety concerns. Functionalized separators with electrically conductive and lithiophilic coating layers potentially inhibit dendrite formation and growth on Li metal anodes by providing nucleation sites for reversible Li deposition/stripping. In this work, we propose functionalized separators incorporating heteroatom-doped (N or B) graphene interlayers to modulate the Li nucleation behavior. The electronegative N-doping and electropositive B-doping were investigated to understand their regulation of the Li deposition behavior. With the heteroatom-doped graphene-coated separators, we observe significantly improved cycling stability along with enhanced charge transfer kinetics and low Li nucleation overpotential. This is attributed to the heteroatom-doped graphene interlayer expanding the surface area of the Li metal anode while providing additional space for uniform Li deposition/stripping, thus preventing undesirable side reactions. As a result, the formation of dendrites and pits on the Li metal anode surface is suppressed, demonstrating the protective effect of the Li metal anode. Interestingly, N-doped graphene-coated separators exhibit lower Li nucleation overpotentials than B-doped graphene-coated separators but rather lower average Coulombic efficiencies and reduced cycling stability. This implies that adequate adsorption on B-based sites, as opposed to the strong adsorption on N-based sites, improves the reversibility. Notably, the Li adsorption strength of the lithiophilic functional groups critically affects the reversibility, as observed by Li nucleation barrier measurements and atomistic simulations. This work suggests that interface engineering using conductive and lithiophilic materials can be a promising strategy for controlling Li deposition in advanced Li metal batteries.