Dental Pathophysiology of Odontogenic Sinusitis: Endodontic Infections.

Bacterial odontogenic sinusitis (ODS) arises from maxillary dental issues or oral procedures, and affects at least the maxillary sinuses, with or without other paranasal sinus involvement. It has been historically underreported, in contrast to more recent findings attributing 25-40% of chronic maxillary sinusitis to dental causes. Endodontic infections represent one of the most common causes of ODS. Endodontic factors like root canal infection and microbial proximity to sinus cavities play pivotal roles. Host immunological responses further shape disease severity and progression. This article aims to explore the complexity of endodontic infections that cause ODS, elucidating anatomical, microbial, and immunological aspects.

Nonsurgical Endodontic Treatment of Type II Dens Invaginatus in A Maxillary Lateral Incisor: A Case Report.

Dens invaginatus (DI) is one of the developmental dental anomalies that results in an invagination of the enamel organ into the dental papila during odontogenesis. The purpose of this study is to report a case of nonsurgical endodontic treatment of an Oehlers type II DI in a right maxillary lateral incisor with an extensive periapical damage, along with the two-year clinical and tomographic follow-up. A 30-year-old patient was referred for endodontic treatment of tooth #12. On clinical examination, a change in the shape and color of the crown was observed. The tooth responded negative to pulp sensibility, percussion, palpation and mobility tests. After tomographic evaluation, an Oehlers type II DI was visualized, in addition to an extensive periradicular lesion. The diagnosis was asymptomatic apical periodontitis. The treatment was carried out in two sessions, through intense enhancement of the auxiliary chemical substance with passive ultrasonic irrigation, XP-Endo Finisher and the use of hydroxide-based intracanal medication. Appropriate treatment in cases with anatomic variations requires an accurate and early diagnosis based on clinical examination and radiographic images. A two-year follow-up of the present case showed that the correct diagnosis associated with appropriate instrumentation techniques, supplementary disinfection, and adequate three-dimensional sealing of the canal with filling material, resulted in regression of the periradicular lesion and bone repair.

Comparative Evaluation of Supplementary Cleaning Techniques for Removal of Bio-C Sealer and AH-Plus from Oval Root Canals: A Micro-CT Analysis.

Introduction: This study aimed to compare the effectiveness of two endodontic cleaning techniques, passive ultrasonic irrigation (PUI) and the XP-endo Finisher R (XPR) system, in removing residual filling material during endodontic retreatment procedures. Materials and Methods: Forty mandibular premolars with oval canals were divided into four groups based on the sealer used (AH-Plus or Bio-C Sealer) and the cleaning technique employed (PUI or XPR). To ensure uniformity of canal volume among groups, initial micro-CT scans were conducted. The canals were instrumented, filled, and then re-instrumented before undergoing either PUI or XPR cleaning techniques. Residual filling material volumes were assessed through micro-CT scans, and statistical analysis was performed using the Kruskal-Wallis and Mann-Whitney U tests. Results: Following instrumentation, there was no significant difference in residual filling material volumes between AH-Plus and Bio-C Sealer groups (1.35 mm3and 1.02 mm3, respectively; P>0.05). However, after supplementary cleaning techniques, XPR-cleaned specimens exhibited significantly less residual material compared to PUI-cleaned specimens (0.01 mm3 and 0.29 mm3 for Bio-C Sealer, and 0.07 mm3 and. 0.30 mm3 for AH-Plus, P<0.05). Conclusion: The XPR system was found to be more effective than PUI in removing residual filling material from Bio-C Sealer-filled root canals. This highlights its potential as a useful supplementary cleaning technique in endodontic retreatment procedures.

Evaluation of Canal Transportation and Centering Ability of RaCe and Af f-one Systems by Cone-beam Computed Tomography: An in Vitro Study.

Introduction: Rotary systems have made significant advances to improve their root canal preparation efficacy. These instruments can properly preserve the root canal anatomy and morphology. The present in vitro study aimed to compare canal transportation and centering ability of RaCe and Af f-one systems using cone-beam computed tomography. Materials and Methods: Thirty-six mandibular molars were included. The samples were randomly assigned to two groups (n=18): group 1, RaCe, and group 2, Af f-one. Canal preparation was conducted using the respective files according to the manufacturers' instructions. The cone-beam computed tomographic scanning of the samples was performed before and after preparation. The data were analyzed by using two-way ANOVA. Results: In both the RaCe and Af f-one rotary systems, canal centrality and transportation were similar at coronal, middle, and apical cross-sections. In addition, canal transportation and centrality were identical in the RaCe and Af f-one rotary files (P<0.05). Conclusion: The two studied rotary systems did not exhibit significant differences in root canal transportation and preservation of root canal centrality in the apical, middle, and coronal thirds.

Guided Endodontic Treatment of Mandibular Incisor with Pulp Canal Obliteration following Dental Trauma: A Case Report.

Root canal obliteration is caused by hard tissue apposition and is often associated with teeth with a history of trauma, orthodontic movement, caries reaction, restorative procedures near the pulp chamber, and teeth of elderly patients. Preoperative planning of root canal treatment should be thorough and include an assessment of the patient's signs and symptoms in addition to the evaluation of complementary examinations. In a 27-year-old patient with dyschromia of the lower central incisor, a history of dental trauma, and a positive response to vertical percussion, an initial periapical radiograph was obtained that showed calcification of the canal and presence of a periapical lesion. The patient presented with pain on chewing, a positive response to palpation and a vertical percussion test. The diagnosis was symptomatic apical periodontitis. A cone-beam computed tomography scan was requested and a surface scan was performed to establish a static guide. The root canal was accessed in the middle third of the root and the canal was located using a minimally invasive approach. The root canal was treated conventionally. Results obtained showed the success of the treatment after a 3-year clinical and radiographic follow-up. Therefore, the use of an endodontic guide in cases of calcified canals significantly reduces the clinician's working time and offers a more predictable approach to the treatment of these pathologies.

Pulp, Root Canal and Peri-radicular Conditions: The Need for Re-classification.

Currently no standard, universally accepted, and clinically useful classification of pulp, root canal and peri-radicular conditions is used within the dental profession. Most published classifications are either too simple and miss many of the conditions reported to occur within the pulp, root canal and peri-radicular tissues, or they are too complex for use in clinical settings. Furthermore, many classifications have used inappropriate terminology that has either not been defined or has been poorly defined. The lack of standardisation leads to confusion amongst practitioners and potential uncertainty regarding treatment. It also limits the ability to communicate effectively, to teach appropriately, and to compare data and research findings throughout the world. When developing a classification of tissue conditions or diseases, it is essential that the classification is developed appropriately and meets the recommended criteria for effective clinical, educational and research use. It is also extremely important that correct and well-defined terminology is used since "words do matter". Popular terminology based on symptoms should be avoided as these have been proven to lead to inappropriate treatment decisions. This review discusses how classifications should be developed for pulp, root canal and peri-radicular conditions. It also discusses the deficiencies of some popular classifications and outlines the classifications that truly address the recommended criteria and reflect the physiological and pathological changes in the pulp, root canal and peri-radicular tissues. Hence, it is recommended that these latter classifications be adopted as the internationally-accepted classifications for future clinical use, as well as for educational, research and communication purposes.

Knowledge, awareness, and approaches of dentistry students about separated instruments in root canals: A cross-sectional study.

PURPOSE: This survey aims to assess the understanding, viewpoints, and methods employed by undergraduate dental students in the fourth and fifth grades regarding broken endodontic instruments in root canal procedures. METHODS: A survey comprising 27 questions across three sections-demographic information, practical application, and knowledge-approach-awareness inquiries-was developed. It was distributed to 282 students either in person or via a link shared through WhatsApp groups using Google Forms. RESULTS: Out of the total 219 respondents (77.6%), 10.6% experienced instrument breakage once during their clinical internship, while 2.8% encountered it more than once. The majority (86.7%) did not face instrument fracture incidents. Among these occurrences, it was observed that endodontic instruments were most commonly separated in molars, accounting for 51.9%. Nearly half (48.1%) of the students noted instrument breakage during the initial attempt to reach the apical part of the canal, while 55.6% reported breakage during root canal cleaning and shaping. CONCLUSIONS: Most dental students opted to leave the separated instrument in the root canal and proceed with filling it. Enhancing students' understanding and awareness of this matter will help prevent potential complications and enable them to handle such situations appropriately when they arise.

Root canal morphology of permanent mandibular anterior teeth in a Pakistani population: A cone beam computed tomography assessment.

Objective: To investigate the incidence of accessory canals and the variation in root canal morphology of permanent mandibular incisors and canines in Pakistani population using Cone Beam Computed Tomography (CBCT). Methods: A cross-sectional study was conducted in University College of Dentistry, The University of Lahore, Pakistan after getting institutional ethical permission from January 2020 to September 2022. The data included records of 111 patients consisting of 444 permanent mandibular incisors and 222 permanent mandibular canines. Accessory root, root canals and Vertucci canal configuration for each tooth was recorded. Data analysis was done using SPSS v20. Descriptive statistics were calculated for each anatomical parameter. Chi-square test was applied to determine association of gender with the presence of accessory roots and root canals. Results: Among the 111 records evaluated, 48.6% were males and 51.4% were females. No accessory root was found in the central and lateral incisors. However, an accessory root was found in 4.9% of the canines. The incidence of accessory canals in the central incisors, lateral incisors and canines was 18.9%, 25.2% and 10.4% respectively. The most common canal configuration in teeth with accessory canals was Type-III, followed by Type-II and Type-V. Conclusion: None of the central or lateral incisor showed accessory root while it was detected in 4.9% canines. The frequency of accessory root canal was found to be 18.9%, 25.2% and 10.4% in central incisors, lateral incisors and canines respectively. The most common canal configuration was Type-I, followed by Type-III and Type-II. Type-V, VI and VII were less common.

Numerical investigation and optimization of innovative root canal irrigation needles with composite flow control structures.

Needle syringe irrigation is frequently used in root canal therapy, and the flow pattern during irrigation can be efficiently manipulated by means of passive flow control technique, resulting in expected irrigation performance improvement. Therefore, novel needles with composite flow control structures are numerically investigated and optimized in this study. Based on the 30G needle, six single/double side-vented needles with dimple and protrusion are proposed. Two flow rates in line with clinical applications, 5.3 and 8.6 m/s, are used in the analysis. Three performance parameters are investigated. The safety of the irrigation system is evaluated by the root canal apical pressure, whereas the irrigant extension and the flushing efficiency are evaluated by the extending depth and the effective cleaning area, respectively. The results demonstrate that the shear stress of the double-side-vented needle is higher while the irrigant extension is enhanced with a dimple structure. The performance of the double-side-vented needle with a dimple is superior to that of other designs, with up to 33% improvement in extending depth and a 22% increase in effective cleaning area over the prototype. New needles do not raise risk of irrigant extrusion. Furthermore, the effect of dimple depth and outlet angle are investigated. The needle with a dimple of 0.04 mm depth shows the highest extending depth within the confines of the investigation. The effective cleaning area is significantly influenced by the needle outlets, and the effective cleaning area expands with an increase in needle outlet angle, while the extending depth gradually declines.

Comparative effects of the conventional, ultrasonic, and laser-activated irrigation on penetration depth of three photosensitizers in the root canal system.

OBJECTIVES: This study compared the effects of conventional, ultrasonic, and laser-activated irrigation (LAI) on penetration depth of three photosensitizers (PSs) in the root canal system. MATERIALS AND METHODS: In this in vitro, experimental study, 120 extracted anterior teeth were decoronated such that the remaining root length was standardized at 12 mm. After root canal instrumentation with the ProTaper rotary system and irrigation with 5.25% NaOCl, the roots were assigned to 12 groups for the application of toluidine blue (TB), curcumin, and phycocyanin PSs combined with the LAI using erbium laser with 0.4 mm and 0.6 mm tips, ultrasonic activation, and conventional irrigation. The specimens were sectioned apicocoronally, and the dye penetration depth was quantified in the coronal, middle, and apical thirds under a stereomicroscope at x20 magnification. Data were analyzed by the Kruskal-Wallis and Dunn test (alpha=0.05). RESULTS: The effects of irrigation technique, PS type, and their interaction on dye penetration depth were significant at the apical, middle, and coronal thirds (P<0.0001). TB + LAI with 0.4- and 0.6-mm laser tips showed the highest penetration depth while phycocyanin + LAI or conventional irrigation showed the lowest penetration depth at all areas. Dye penetration depth was the highest in the coronal, and the lowest in the apical third. CONCLUSION: The LAI technique with erbium laser (0.4- and 0.6-mm tips) enhanced the penetration depth of TB. The tested irrigation techniques had no significant efficacy for enhancement of the penetration depth of curcumin and phycocyanin.

Effect of Different Electroconductive Root Canal Irrigations on the Accuracy of Different Apex Locators: An In Vitro Comparative Study.

Aim: An accurate working length (WL) estimation is fundamental to a successful endodontic therapy. The objective of this comparative in vitro research was to investigate the performance of iPex II and the Root ZX Mini electronic apex locators (EALs) in measuring root canal WL with different irrigant solutions and their relation to the electrical conductivity of irrigation solutions. Materials and Methods: Seventy sound permanent lower premolar teeth, each with a single root and developed apices, were used. Under an X15 stereomicroscope, the real working length was determined with the aid of a #10 file. After that, teeth were placed into an alginate model, and the iPex II and Root ZX Mini were used for the detection of electronic working length with various irrigants. Seventy teeth were randomly distributed into seven groups, 10 per each group (group I: dry canal; group II: distilled water; group III: ozonated water; group IV: 5% sodium hypochlorite (NaOCl); group V: 2% chlorhexidine, group VI: 17% ethylenediaminetetraacetic acid (EDTA) solution, and group VII: 17% EDTA gel). The difference in WL was calculated by deducting real working length from its electronic working length. The study also evaluates the electrical conductivity of the seven endodontic irrigant solutions. The two-way analysis of variance (ANOVA) test was used for statistical analysis. Results: Statistically, neither both types of EALs (P = 0.088) nor various irrigating solutions with varying electrical conductivities (P = 0.099) significantly affect the accuracy of EL estimation. Conclusions: There were no significant differences between the accuracy of the Root ZX Mini and the iPex II. The accuracy of both apex locators is unaffected in the presence of various irrigation solutions with varying electrical conductivities in this research.

A Rare Case of Single-Rooted Maxillary First Molar With Type II Canal Configuration.

The morphological variations in roots and root canals vary greatly in multi-rooted teeth making it a challenge for accurate diagnosis and effective endodontic therapy. In addition to using technology appropriately, this article highlights how important it is to have a complete understanding of root canal morphology. With the assistance of cone-beam computed tomography (CBCT) images and a dental operating microscope (DOM), successful endodontic treatment was performed on a single-rooted maxillary first molar with Vertucci's type II canal configuration. CBCT and DOM proved to be valuable tools for the effective diagnosis and management of this atypical morphology.

The effects of aperture position and length in side-vented needles on root canal irrigation: A computational fluid dynamics study.

INTRODUCTION: Root canal irrigation is crucial for infection control during root canal treatment. Side-vented needles for positive pressure irrigation are commonly used in clinical practice. However, variations in needle design among manufacturers can impact the fluid dynamics of irrigation. This study aims to use computational fluid dynamics to explore the flow characteristics of different needle aperture lengths and positions, and their effects on the effectiveness and safety of irrigation, using a validated passive scalar transport numerical model. METHODS: The validation of the CFD irrigant model was achieved by comparing it with an in vitro irrigation experiment model. The CFD model used scalar concentration, while the in vitro experiment model used red dye tracing. Using a standard 30G side-vented needle as a reference, virtual needle models featuring four aperture lengths and three positions were created. These virtual irrigation needles were then placed in two root canal geometries for CFD simulation to evaluate fluid exchange capabilities and related fluid dynamic parameters. RESULTS: The results of the CFD simulation, using a scalar transport model, closely matched the in vitro tracer tests for irrigation experiments across seven root canal geometries. The CFD analysis indicated that positioning the aperture lower increased the irrigant exchange distance. Notably, decreasing the aperture length to 0.25x, and positioning it at the lower end of the needle significantly increased exchange distance and shear stress, while reducing apical pressure. CONCLUSIONS: These results indicate that the position and length of the aperture affect the exchange distance of irrigant flow, wall shear stress, and apical pressure. The CFD validation model for scalar transport, based on a steady state, can function as a valuable tool for optimizing the side-vented needle in research. Further research on the design of side-vented needles will enhance the understanding of flow characteristics beneficial for irrigation efficiency in clinical practice.

Effects of Endodontic Irrigants on Shear Bond Strength of Mild Universal Adhesives to Dentin.

PURPOSE: The objective of this in vitro study was to evaluate the shear bond strength (SBS) of several universal adhesives to dentin treated with sodium hypochlorite (NaOCl), and NaOCl followed by ethylenediaminetetraacetic acid (EDTA). MATERIALS AND METHODS: Adhese Universal, Scotchbond Universal, Prime & Bond Elect, Prime & Bond Active, and Optibond XTR were included in the study. SBS values were determined in self-etch mode with no pretreatment of the dentin, after a 20-minute exposure of the dentin to 6% NaOCl, and after a 20-minute exposure to NaOCl followed by a one-minute exposure to 17% EDTA. Experimental groups were repeated using a total-etch technique (except Optibond XTR). RESULTS: Adhesives in self-etch mode had significantly reduced SBS following dentin exposure to NaOCl (P < .05), while with a total-etch technique, only Prime & Bond Active was affected (P < .05). SBS in self-etch mode when NaOCl exposure was followed by EDTA were equal to or higher than negative control values (P < .05). For total-etch groups, Adhese Universal was negatively affected by NaOCl + EDTA exposure (P < .05). Prime & Bond Elect exhibited lower SBS following NaOCl + EDTA exposure when compared to just NaOCl exposure but was not different from the negative control (P < .05). CONCLUSION: For the adhesives tested, the use of 17% EDTA following NaOCl exposure negated the negative effects of NaOCl on SBS in self-etch mode. When used in total-etch mode, results varied significantly, with some adhesives performing better or worse depending on the specific testing condition.

Non-surgical treatment of maxillary lateral incisor double dens invaginatus type â ¢ with apical periodontitis.

Dental invagination is an abnormality of the crown or root development induced during tooth germ development when the enamel-forming apparatus or epithelial root sheath overpopulates and folds into the papilla. In severe cases, the invaginated channels are connected to the pulp and periodontal tissues, often causing endodontic and periapical diseases. The complex anatomical pattern of this disease adds difficulty in its preoperative diagnosis and clinical operation. In this paper, we report a case of non-surgical treatment assisted by cone beam CT and microscopy for maxillary lateral incisor double dens invaginatus type Ⅲ (Ⅲa and Ⅲb) with apical periapical infection. After 1-year follow-up, the affected tooth was asymptomatic and the periapical lesion was significantly reduced.

In Vitro Methods for Assessing the Antibacterial and Antibiofilm Properties of Essential Oils as Potential Root Canal Irrigants-A Simplified Description of the Technical Steps.

BACKGROUND: Essential oils have gained in significance due to their various biological activities, and there is a growing demand for them in many industries. The present article focuses on the technical steps for an in vitro evaluation of the antibacterial and antibiofilm activities of essential oils for potential use as root canal irrigant in dentistry. METHODS: The bioactivities of the essential oil were investigated through in vitro assays. The gram-positive bacterium Enterococcus faecalis was used as a micro-organism model. The antibacterial activity of the essential oil was assessed using the microdilution method, and resazurin staining to determine the minimal inhibition concentrations (MICs) and the minimal bactericidal concentrations (MBCs). The antibiofilm effect was evaluated spectrophotometrically at 570 nm using the microplate cultivation technique and crystal violet staining. CONCLUSIONS: This article features a detailed in vitro protocol to facilitate the preparation of the essential oil samples, the bacterial suspension, and the methods used for assessment of the antibiofilm and antibacterial activities of the essential oil. The advantages of these approaches are presented in relation to the limits linked to the choice of the bacteria and the essential oil.

Prevalence and Classification of C-Shaped Canal and Radix in Mandibular Molars Using Cone-Beam Computed Tomography on Mexican Population.

The diverse morphological configurations in teeth present clinical challenges in root canal treatment, complicating instrumentation and irrigation processes, which can lead to treatment failure. Understanding anatomical variations, such as C-shaped canals and radix entomolaris, enhances clinical skills and improves long-term endodontic treatment success rates. Cone-beam computed tomography (CBCT) offers superior diagnostic capabilities over conventional radiography, enabling the pre-operative detection of root configurations and canal numbers, facilitating personalized endodontic treatments. A total of 2173 teeth of a Mexican population, including 1057 first mandibular molars and 1116 s mandibular molars, were studied using only CBCT to identify C-shaped canals and radix configurations of patients who were treated from 2018 to 2023 at the Department of Radiology at the Faculty of Dentistry, Juarez University of the State of Durango, Mexico. C-shaped canals were identified in 160 teeth, with a prevalence of 0.2% in first mandibular molars and 14.1% in second mandibular molars. The highest frequency was in the left second mandibular molar (3.7) at 14.8%. Gender differences were significant, with higher prevalence in females (27.3%) compared to males (13.3%). The most common C-shaped canal configuration was type C2 (39.3%). Radix entomolaris was found in 52 teeth, with a prevalence of 3.4% in first mandibular molars and 1.4% in second mandibular molars. This research on a Mexican population using cone-beam computed tomography (CBCT) highlights significant findings in the prevalence and types of C-shaped canals and radix entomolaris in mandibular molars for this population. The left second mandibular molar (3.7) showed the highest prevalence at 14.8%, followed closely by the right second mandibular molar (4.7) at 13.5%, with a significant difference (p < 0.001). We found a significant difference in the prevalence of C-shaped canals between genders (p = 0.004, OR 1.78). Additionally, radix entomolaris (p < 0.001) was more frequently identified in first mandibular molars to a significant degree. These insights underscore the importance of CBCT in diagnosing complex root anatomies, which can greatly enhance the success rates of endodontic procedures by allowing for more tailored and precise treatments for this population.

Root Canal Dentin Microhardness after Contact with Antibiotic Medications: An In Vitro Study.

Background: Antibiotic pastes used as intracanal medication in cases of revascularization therapy might cause negative effects on tooth properties, such as a reduction in dentin microhardness. This in vitro study investigated dentin microhardness in three different locations distancing from the canal lumen after 20 days of treatment with a tri-antibiotic paste (ciprofloxacin, metronidazole, and minocycline), and with a double-antibiotic paste (ciprofloxacin and metronidazole), with calcium hydroxide [Ca(OH)2] UltracalTM XS-treated dentin as comparison. Material and Methods: Human mandibular premolars (n = 48) had the root canals cleaned and shaped and were used to produce dentin slices. Dentin slices remained immersed in the medications for 20 days. The Knoop microhardness (KHN) test was performed before (baseline/Day-0) and after treatment (Day-20) with the medications. Indentations were made at 25 µm, 50 µm, and 100 µm distances from the root canal lumen. The KHN was compared intra-group using Wilcoxon's test. Independent groups were compared using Mann-Whitney's and Kruskal-Wallis' tests, at α = 5%. Results: The microhardness in all the tested groups was reduced at Day-20 in comparison with Day-0 (p < 0.001) (intra-group comparison/same distances). The Day-0 values were similar, and the Day-20 values were higher for the Ca(OH)2 group (p < 0.05) (comparison between groups/same distances). Conclusions: Calcium hydroxide for 20 days would be preferred rather than antibiotic pastes to minimize the expected reduction in dentin microhardness during regenerative procedures.

Chitosan-Gelatin Scaffolds Loaded with Different Antibiotic Formulations for Regenerative Endodontic Procedures Promote Biocompatibility and Antibacterial Activity.

BACKGROUND: This study investigated the biocompatibility and antibacterial efficacy of chitosan-gelatin (CH-G) scaffolds loaded with slow-releasing antibiotic formulations used in regeneration endodontic procedures (REPs). METHODS: Scaffolds were fabricated using freeze drying and loaded with varying concentrations of augmentin or modified triple antibiotic paste (mTAP). High-resolution scanning electron microscopy (SEM) was used to characterize the scaffold, while drug release was monitored via UV-Vis spectrophotometry. Immortalized human mesenchymal stem cells (hMSCs) were cultured on CH-G scaffolds alone (control), either 0.1 mg/mL or 1 mg/mL of augmentin or mTAP, and 10 mg/mL calcium hydroxide (Ca(OH)2). Cell viability and proliferation were assessed using the Alamar Blue assay and SEM, respectively, and live/dead staining further corroborated cell viability. Antibacterial activity against Enterococcus faecalis was evaluated using the MTT assay and confocal laser scanning microscopy (CLSM). RESULTS: Augmentin at 0.1 mg/mL appeared to promote better cell growth and attachment within the scaffolds than all other formulations, exhibiting acceptable viability. SEM revealed improved cell attachment in augmentin and mTAP groups compared to the Ca(OH)2 group. Augmentin at 1 mg/mL and mTAP groups significantly reduced viable bacteria compared to controls. Augmentin groups and mTAP at 1 mg/mL were highly effective in eliminating E. faecalis biofilms, with mTAP potentially causing more cell death within the remaining biofilm structures. CONCLUSIONS: This study suggests that CH-G scaffolds loaded with augmentin and mTAP, particularly at a concentration of 1 mg/mL, offer promising advantages for REPs due to their biocompatibility, antibacterial efficacy, and ability to promote cell attachment. Further research may explore the long-term effects in clinical settings.

Evaluation of stress distributions in endodontically treated anterior incisors under occlusal and trauma-induced forces following various restoration treatments: A finite element analysis.

BACKGROUND: The aim of this study was to calculate the stress distribution of fiberglass post associated with resin composite crown restoration and fiberglass posts with zirconia restorations in mature and immature endodontically treated central maxillary incisor under various loading conditions. MATERIALS AND METHODS: The study created six different study models in a virtual environment: healthy mature maxillary central teeth, intact immature maxillary central teeth, mature maxillary central teeth with fiberglass post associated with resin composite crown restoration, immature maxillary central teeth with fiberglass post associated with resin composite crown restoration, mature maxillary central teeth with fiberglass posts and zirconia restoration, and immature maxillary central teeth with fiberglass posts and zirconia restoration. Loading conditions simulating mastication, trauma, and bruxism were applied to each of the models at different angles and amounts. The von Mises and the maximum and minimum principal stress values in tooth structures (dentin) and support structures (bone, PDL) and materials were observed using finite element stress analysis. RESULTS: The highest stress values in the tissue and the restoration structure were observed for masticating force and crowns rehabilitated with zirconia restorations. None of the compared loading conditions and restorations showed destructive stress values on periodontal ligament or bone. CONCLUSION: The mature and immature endodontically treated central maxillary incisors can be better rehabilitated using fiberglass post associated with resin composite crown restoration and may be preferred to zirconia restorations in order to reduce the stresses on the surrounding tissues and teeth. However, further clinical studies are needed to fully explore this topic.