Microplastics and nanoplastics released from injection syringe, solid and liquid dimethylpolysiloxane (PDMS).

For a plastic syringe, a stopper at the end of plunger is usually made of polydimethylsiloxane (PDMS, and co-ingredients). To reduce friction and prevent leakage between the stopper and barrel, short chain polymer of liquid PDMS is also used as lubricant. Consequently, an injection process can release solid PDMS debris from the stopper and barrel, and liquid PDMS droplets from the lubricant, both of which are confirmed herein as solid and liquid micro(nano)plastics. From molecular spectrum perspective to directly visualise those micro(nano)plastics, Raman imaging was employed to analyse hundreds-to-thousands of spectra (hyper spectrum or hyperspectral matrix) and significantly enhance signal-to-noise ratio. From morphology perspective to provide high resolution of image, scanning electron microscopy (SEM) was engaged to cross-check with Raman images and increase assignment / quantification certainty. The weak Raman imaging signal of nanoplastics was extracted using image deconvolution algorithm to remove the background noise and average the signal variation. To increase the result's representativeness and avoid quantification bias, multiple syringes were tested and multiple areas were randomly scanned toward statistical results. It was estimated that thousands of microplastics and millions of nanoplastics of solid/liquid PDMS might be injected when using a plastic syringe of 1 mL. Overall, Raman imaging (along with algorithm and SEM) can be helpful for further research on micro(nano)plastics, and it should be cautious to use plastic syringe due to the increasing concern on the emerging contamination of not only solid but also liquid micro(nano)plastics.

Comparative SEM Study of Sensilla and Tyloid Structures in the Antennae of Vespinae (Hymenoptera: Vespidae).

This study investigates the distribution, morphology, and potential functions of antennal sensilla in various wasp species, including Dolichovespula flora, D. intermedia, Vespula structor, Vl. vulgaris, Provespa barthelemyi, Vespa bicolor, V. ducalis, V. mocsaryana, and V. velutina var. nigothorax. The study thoroughly analyzes the antennal structure of these species, representing all four genera of the yellow-jacket and hornet subfamily Vespinae. Using scanning electron microscopy (SEM), the study identifies a total of nineteen types of sensilla, including sensilla trichodea (ST-I, ST-II, ST-III), sensilla campaniform (SCF-I, SCF-II, SCF-III), pit organs (SCO-I, SCO-II, and SA), sensilla placodea (SP-I, SP-II), sensilla chaetica (SCH-I, SCH-II), sensilla basiconica (SB-I, SB-II), sensilla agmon (SAG-I, SAG-II), and sensilla coelocapitular (SCA). Additionally, tyloids were observed in the males of seven species, except for Vl. structor and Vl. vulgaris. The study provides insights into these sensilla types' morphology, abundance, and distribution. It discusses the variations in sensilla morphology among different species and the presence of gender-specific sensilla. This study provides new data about the morphology and distribution patterns of sensilla and tyloid.

Characterization of Syzygium cumini (L.) Skeels (Jamun Seed) Particulate Fillers for Their Potential Use in Polymer Composites.

Syzgium cumini (L.) Skeels powder (S. cumini powder), also known as Jamun, is well-known for its various medical and health benefits. It is especially recognized for its antidiabetic and antioxidant properties. Thus, S. cumini powder is used in various industries, such as the food and cosmetic industries. In this work, the fruit of S. cumini was utilized; its seeds were extracted, dried, and ground into powder. The ground powders were subjected to various techniques such as physicochemical tests, Fourier transform infrared (FTIR) spectroscopy, X-ray diffractometry (XRD), particle size analysis, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and antioxidant analysis. From the physicochemical tests, it was revealed that the jamun seed filler contained cellulose (43.28%), hemicellulose (19.88%), lignin (23.28%), pectin (12.58%), and wax (0.98%). The FTIR analysis supported these results. For instance, a peak at 2889 cm-1 was observed and associated with CH stretching, typically found in methyl and methylene groups, characteristic of cellulose and hemicellulose structures. The XRD results demonstrated that the crystallinity index of the jamun seed filler was 42.63%. The particle analysis indicated that the mean (average) particle size was 25.34 µm. This observation was ensured with SEM results. The EDX spectrum results showed the elemental composition of the fillers. Regarding thermal degradation, the jamun seed filler had the ability to withstand temperatures of up to 316.5 °C. Furthermore, endothermic and exothermic peaks were observed at 305 °C and 400 °C, respectively. Furthermore, the antioxidant property of the powder displayed a peak scavenging activity of 91.4%. This comprehensive study not only underscores the viability of S. cumini powder as a sustainable and effective particulate filler in polymer composites but also demonstrates its potential to enhance the mechanical properties of composites, thereby offering significant implications for the development of eco-friendly materials in various industrial applications.

Quantitative and qualitative analysis of metallic ion release of orthodontic brackets in three different pH conditions - An invitro study.

Background: Fluoridated mouth rinses improve anti-cariogenic environment but decrease oral pH below critical value, affecting orthodontic bracket surface topography and causing corrosive changes over prolonged use. This invitro study aimed to quantitatively and qualitatively assess the surface topography and metallic ion release of the stainless steel (SS) brackets at varying acidic and alkaline pH. Materials and methods: Forty unused SS brackets were divided into four groups (Group A, B, C, D) and immersed for 48- hours in solutions of artificial saliva and sodium fluoride (0.2 %) mouth rinse at varying pH of 5.5,6.7,7 and 8. The surface morphologic changes were analyzed under scanning electron microscope (SEM) at 50×, 150×, and 500× magnification. The changes in slot area were scored using the customized scale. The Energy Dispersive Xray Spectroscopy Analysis (EDAX) was used to estimate the probed elements' atomic and weight percentage. Results: The mean score of the scale was 3.4 for the brackets immersed in the acidic solution which was statistically significant (p = 0.00)and for alkaline and neutral solutions (p = 0.00). Chromium was found to be significantly higher in the alkaline solution (p = 0.016) followed by the neutral solution. Carbon was found excess in acidic solution than the neutral and alkaline solution. Conclusion: Quantitative and qualitative analysis of the ion release in stainless steel brackets using SEM and EDAX revealed the corrosive effect of fluoride ion causing maximum surface changes in acidic medium and chromium release in alkaline pH.

Assessment of Remineralization Ability of Different Fluoride Varnishes on Artificial Enamel Lesion of Primary Teeth - A Comparative Study.

Aim: The current study's aim was to evaluate the potential of various fluoride varnishes to remineralize artificial enamel lesions on primary teeth. Materials and Methods: For the study, 90 deciduous molar teeth that were implicated for extraction were taken. A window region with a size of 3 × 3 mm was located in the middle of the tooth's coronal surface. The remaining portion was given a coat of nail polish and given time to dry. A demineralizing solution was used to create the artificial enamel lesion. The samples were randomized into three experimental groups at random, with 30 samples in each group. Group 1: Application of Clinpro White Varnish, Group 2: Application of Duraphat Varnish, and Group 3: Application of MI Varnish. After 14 days, samples from each group were examined under scanning electron microscopy at a magnification of 1000× to determine whether remineralization had occurred. Microhardness was also determined using a microhardness tester. Result: Before the intervention, the mean demineralized enamel lesion in the Clinpro White Varnish group was 134.44 ± 0.04, in the Duraphat Varnish group was 133.76 ± 0.12, and in the MI Varnish group was 133.89 ± 0.08. After intervention, the maximum remineralized area was found in the MI Varnish group (82.74 ± 0.18) followed by the Clinpro White Varnish group (101.43 ± 0.16) and the Duraphat Varnish group (104.11 ± 0.10). After the intervention, there was a statistically significant difference found between the groups. After the intervention, the maximum microhardness mean value improved in the MI Varnish group (257.03 ± 1.09 to 261.18 ± 1.20) followed by Clinpro White Varnish (258.78 ± 1.64 to 260.10 ± 1.22) and Duraphat Varnish group (255.24 ± 1.51 to 258.02 ± 0.89). Conclusion: According to the findings of the current investigation, all of the varnishes utilized in this in vitro experiment are capable of correcting early enamel defects on primary teeth. However, MI Varnish group was very effective compared to the Clinpro White Varnish group and the Duraphat Varnish group.

Peppermint essential oil enhances the vase life of Dendrobium orchids.

To extend the vase life of cut flowers, there is now a trend of using plant essential oils in place of synthetic chemicals, as they are fully biodegradable, more eco-friendly, and safer. The objective of this study was to examine the possible application and postharvest quality effects of three plant essential oils namely, ginger (Zingiber officinale Roscoe), peppermint (Mentha piperita L.), and citronella (Cymbopogon nardus Rendle), as natural vase solution for cut Dendrobium flowers. Peppermint essential oil showed promise as a holding solution for extending the vase life of Dendrobium orchids. To confirm vase life extension, emulsions containing peppermint essential oil at concentrations of 50 and 100 µg mL-1 combined with 4 % glucose to formulate holding solutions applied to Dendrobium orchids. Vase life, some biochemical changes, electrolyte leakage, total microbial count in the holding solution, and physical condition via scanning electron microscopy (SEM) were evaluated over a period of 25 days. The three major compounds in peppermint essential oil were identified as menthol (33.24 %), 1-menthone (18.91 %) and menthofuran (14.85 %). The essential oil was applied in emulsion form as a holding solution. Treatment with 4 % glucose and either 50 or 100 µg mL-1 peppermint essential oil prolonged the vase life of Dendrobium orchids to up to 28 days. Scanning electron microscopy on Day 7 showed that the xylem vessels of treated orchids remained clear, suggesting reduced microbial plugging at the stalk end. Similarly, on Day 20, a reduced microbial cell count was observed for treated orchids (<1 log CFU mL-1) in comparison with controls (7.20 ± 0.04 log CFU mL-1). Finally, the essential oil improved flower quality by helping preserve petal membrane stability and petal anthocyanin content. Our results suggest the application of peppermint essential oil as a novel alternative to chemicals used in holding solutions for extending the vase life of Dendrobium orchids.

Topographical and histological analysis of keratinized mucosal grafts removal techniques an ex-vivo study in porcine mandibles.

The aim of this study was to assess the surface and tissue quality of keratinized mucosa grafts (KMG) obtained using the conventional scalpel and mucotome techniques. This was an experimental in vitro/ex vivo study involving six porcine hemi-mandibles. Specimens were harvested using both the mucotome and conventional scalpel techniques, with randomization determining the choice of technique for tissue removal. The specimens were prepared following predefined laboratory protocols and subsequently subjected to optical microscopy for evaluating epithelial and connective tissue and scanning electron microscopy for topographical and 3D profilometry analysis. Tissues harvested using the mucotome exhibited a linear base and uniform thickness, along with the presence of submucosa and fibrous connective tissue, all of which are ideal for graft success. Differences in the surface characteristics of specimens obtained through the two techniques were observed during a comparative analysis of images obtained through both microscopy types. KMG obtained using the mucotome technique displayed greater uniformity and reduced undesirable cell presence compared to the scalpel technique, thereby enhancing the likelihood of success in soft tissue graft surgical procedures. This study provides valuable insights to oral healthcare professionals and may contribute to future research aimed at achieving more successful surgeries, shorter postoperative recovery times, reduced discomfort, and an overall more positive patient experience.

Development of an Artificial White Spot Lesion Creation Protocol: A Preliminary Study.

BACKGROUND AND OBJECTIVES: Protocols that determine the lesion depth of specific demineralization solutions are lacking. This in vitro study aimed to evaluate various lesion depths of artificial white spot lesions (WSLs) at different exposure times.  Materials and methods: Artificial WSLs were created by placing 30 extracted human premolar teeth into 0.05M acetate buffer solution with a controlled environment of pH 4.4 at 37ºC, which were then exposed in the solution for various durations of 4, 5, 6, 8, 10, and 12 days. The specimens were visually examined using the Ekstrand-Ricketts-Kidd (ERK) system to confirm the WSL, followed by buccolingual sectioning, and evaluated under a scanning electron microscope (SEM) to measure the lesion depth. RESULTS: The SEM showed that the mean lesion depths of representative specimens were 101.33 µm (day 4), 124 µm (day 5), 159 µm (day 6), 187 µm (day 8), 202 µm (day 10), and 212 µm (day 12). The artificial WSL was visually demonstrated in grades 1 and 2 of the ERK system. CONCLUSIONS: The depths of the lesions increased as the duration increased from day 4 to day 12, indicating that the lesion depths increased with the more prolonged exposure to the acetate buffer solution.

Comparative Evaluation of Er: YAG Laser, Diode Laser, and Novamin Technology for Dentinal Tubule Occlusion: An In-Vitro Scanning Electron Microscope (SEM) and Energy Dispersive X-Ray Analysis (EDX) Study.

BACKGROUND: Dentinal hypersensitivity is a brief and painful oral condition that is characterized by an abrupt shooting sensation. Stimulation occurs when hot, cold, sweet, or sour food comes into contact with exposed dentinal tubules. The present study used a scanning electron microscope (SEM) and energy dispersive X-ray analysis (EDX) to investigate the efficacy of Er: YAG, 810 nm diode LASER, and NovaMin Technology in obstructing dentinal tubules. MATERIAL AND METHODS: We extracted the outer layers of 30 human teeth to expose the tubules and then treated the surfaces with 17% ethylenediaminetetraacetic acid (EDTA) to create an etched effect. Three cohorts were created from the portions. Group A was subjected to the application of Erbium:Yttrium-Aluminum-Garnet (Er: YAG) laser with a power output of 2W in the non-contact mode for 1 minute. Group B was subjected to the application of an 810nm diode laser with a power output of 1W in continuous mode for 30 seconds. Group C was subjected to the application of NovaMin paste, which contains a 927 ppm fluoride content. Following the therapy, occluded dentinal tubules were analyzed using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) for both quantitative and qualitative examination. The data analysis was conducted using a one-way analysis of variance (ANOVA) and Tukey's test, with a significance threshold of 0.05. RESULTS: The average percentages of complete blockage of dentinal tubules in Groups A, B, and C were evaluated using the number of entirely unobstructed dentinal tubules at magnifications of 2000X (F = 3.05, p = 0.064), 5000X (F = 5.33, p = 0.011), and 10000X (F = 8.63, p = 0.001). The count of partially open dentinal tubules seen at magnifications of 2000X, 5000X, and 10000X was F = 10.15 (P < 0.001), F = 5.97 (p = 0.007), and F = 2.12 (p = 0.140) accordingly. CONCLUSION: NovaMin technology has demonstrated more effectiveness in blocking dentinal tubules compared to 810nm diodes and Er: YAG lasers.

Advancing in Cesium Retention: Application of Magnesium Phosphate Cement Composites.

A serious risk that harms the safe use of water and affects aquatic ecosystems is water pollution. This occurs when the water's natural equilibrium is disrupted by an excessive amount of substances, both naturally occurring and as a byproduct of human activities, that have varied degrees of toxicity. Radiation from Cs isotopes, which are common components of radioactive waste and are known for their long half-lives (30 years), which are longer than the natural decay processes, is a major source of contamination. Adsorption is a commonly used technique for reducing this kind of contamination, and zeolite chabazite has been chosen as the best adsorbent for cesium in this particular situation. The purpose of this research is to investigate a composite material based on magnesium phosphate cement (MPC). Magnesium oxide (MgO), potassium dihydrogen phosphate (KH2PO4), and properly selected retarders are used to create the MPC. The optimal conditions for this composite material are investigated through the utilization of X-ray diffraction, scanning electron microscopy, BET surface area analysis, and atomic absorption spectroscopy. The principal aim is to enable innovations in the elimination of radioactive waste-contaminated water using effective cesium removal. The most promising results were obtained by using KH2PO4 as an acid, and MgO as a base, and aiming for an M/P ratio of two or four. Furthermore, we chose zeolite chabazite as a crucial component. The best adsorption abilities for Cs were found at Qads = 106.997 mg/g for S2 and Qads = 122.108 mg/g for S1. As a result, zeolite is an eco-friendly material that is a potential usage option, with many benefits, such as low prices, stability, and ease of regeneration and use.

Green Synthesis of Copper and Copper Oxide Nanoparticles From Brown Algae Turbinaria Species' Aqueous Extract and Its Antibacterial Properties.

Background Copper and copper oxide nanoparticles synthesized by green methods have attracted considerable attention due to their environmentally friendly properties and potential applications. Green synthesis involves non-hazardous and sustainable techniques used in the production of a wide range of substances, including nanoparticles, pharmaceuticals, and chemicals. These methods often use different organisms, including bacteria, fungi, algae, and plants, each offering different advantages in terms of simplicity, cost-effectiveness, and environmental sustainability. The environmentally friendly nature of these green synthesis methods responds to the growing need for sustainable nanotechnologies. Brown algae have gained popularity due to their distinct morphological characteristics and diverse biochemical composition. This research focuses on the process of synthesizing copper and copper oxide nanoparticles from the brown algae Turbinaria. It emphasizes the natural ability of the bioactive compounds contained in the algae extract to reduce and stabilize the nanoparticles. The green synthesis of copper and copper oxide nanoparticles from brown algae has demonstrated a wide range of applications, including antibacterial activity. Materials and methods Fresh Turbinaria algae were collected from marine environments to ensure that they were free of contaminants. The algae underwent a purification process to remove impurities and were dried. An aqueous extract was prepared by pulverizing the dried algae and mixing them with distilled water. A copper salt solution utilizing copper nitrate was prepared. The algae extract was mixed with the copper salt solution. There are bioactive compounds in the algae extract that help reduce copper ions, which makes copper and copper oxide nanoparticles come together. The reaction mixture was incubated in a controlled environment to facilitate the growth and enhance the stability of the nanoparticles. To separate the nanoparticles from the reaction mixture, centrifugation was employed, or filtration was done with Whatman filter paper (Merck, Burlington, MA). The nanoparticles were dried to yield a stable powder. Results Copper and copper oxide nanoparticles derived from brown algae extract showed antibacterial effects against Streptococcus mutans, Klebsiella sp., and Staphylococcus mutans. The scanning electron microscopy (SEM) analysis verified the irregular shape and elemental content of the synthesized copper and copper oxide nanoparticles. The X-ray diffraction (XRD) analysis indicated that the synthesized nanoparticles exhibited a crystallinity nature and were composed of a mixture of copper and copper oxide species, namely face-centered cubic and monoclinic structures. The transmission electron microscopy (TEM) images showed copper and copper oxide nanoparticles that were evenly distributed and had a rectangular shape. They exhibited substantial antimicrobial activity against both Gram-positive and Gram-negative bacteria. Conclusions This study enhances the field of green synthesis techniques by showcasing the adaptability of Turbinaria brown algae to synthesize copper and copper oxide nanoparticles. It underscores the potential advantages of these nanoparticles in terms of their antibacterial properties.

Analyzing the Surface Topography of Hafnium Nitride Coating on Titanium Screws: An In Vitro Analysis.

Background The use of surface coatings to enhance the properties lacking in titanium has attracted significant focus in recent times. Hafnium nitride (HfN) coatings could be explored as promising in the osteoinductive properties of titanium implants. HfN exhibits excellent mechanical attributes, such as hardness and wear resistance, and is often used as a coating on high-end equipment for protection. The findings from this research may carve a new path for the production and optimization of HfN coatings to enhance the longevity and augment properties of implant materials. Thus, the present study was orchestrated to elucidate the surface morphology of HfN coating, ultimately contributing to the advancement of dental implant biomaterials. Materials and methods A total of twenty samples of medical grade commercially pure titanium screws (2 mm diameter and 7 mm length) were procured from G. R. Bioure Surgical System Pvt. Ltd., Ravali, Uttar Pradesh, India, and ten samples were reacted with HfN (0.1 M) (Nano Research Elements, Kurukshetra, Haryana, India) in 100% ethanol and stirred continuously for about 48 hours. Then these screw samples were immersed in the prepared colloidal suspension and sintered for two hours at 400 degrees centigrade. The implant screws were affixed onto metal supports. The magnifications for photomicrographs at ×30, ×200, ×1,500, ×3,000, and ×5,000 were standardized. Elementary semi-quantitative analysis of both dental implants was conducted using energy-dispersive X-ray spectrometry (EDX) coupled with the field emission scanning electron microscope (FE-SEM) equipment (JEOL Ltd., Akishima, Tokyo, Japan). The software used for the analysis of the obtained images is SEM Center. Results The surface analysis using the scanning electron microscope (SEM) showed the coating of HfN over titanium screws. The difference in surface morphology of both the group of implant screws can be visualized under 40.0 and 10.0 mm working distance (WD) for both groups. The surface analysis using the EDX of uncoated titanium screws shows five elements in the spectrum: titanium (Ti), oxygen (O), aluminum (Al), carbon (C), and vanadium (V). The EDX of the HfN-coated screws has two additional metals dispersed in the spectrum, hafnium (Hf). The element characteristics are tabulated with their apparent concentration, k ratio, line type, weight percentage, standard label, and factory label for uncoated titanium screws and HfN-coated titanium screws. Conclusion The study evaluated HfN coating over medical grade commercially pure titanium. The surface topography of coated versus uncoated was visualized. The scanning electron microscope (SEM) images showed a homogenous coating over the titanium surfaces, and the EDX showed elemental dispersion of the coated implant. The study aims to provide a comprehensive understanding of the coating's surface morphology, which will aid in the development of more durable and biocompatible implants. This thereby provides a promising scope for further research of this novel metal coating for use in the biomedical sectors, specifically for dental implants.

Touch-cure activation by marketed universal resin luting cements of their associated primer to dentin.

PURPOSE: The aim of this study was to investigate the dentin shear bond strength (SBS) and bonding interface of three recently developed "universal" resin luting cements based on different modalities. METHODS: The dentin SBS and interfacial analysis of three recently launched "universal" resin luting cements, namely, G-Cem One, RelyX Universal and Panavia SA cement universal, were studied. All bonding protocols, including the previous use of their dedicated primer or universal adhesive in touch-cure mode or light-cure mode were performed. Variolink Esthetic LC used in conjunction with Scotchbond Universal Plus was used as a control group. For each group (n = 9), 10 specimens were tested for dentin SBS and two were examined by scanning electron microscopy. SBS were analyzed by two-way ANOVA followed by Dunnett's test. RESULTS: SBS values showed that the three "universal" resin luting cements tested exhibit different adhesive behaviors. G-Cem One with its touch-cure activated primer had a greater SBS to dentin (25.5 MPa) than that of the control group (22.1 MPa). CONCLUSION: "Universal" resin luting cements have variable efficacy when used in self-curing mode. The touch-curing mode is also of concern but may show high potential for some formulations.

Notes of the trichobothrial patterns in damsel bugs (Insecta: Hemiptera: Nabidae).

A trichobothrium is a complex sensory organ, which usually consists of a long, slender mechanoreceptive seta (trich), which is situated in a cuplike depression in the cuticle (bothrium). Nabidae (Hemiptera: Heteroptera: Cimicomorpha), also called damsel bugs, are a relatively small family within which two subfamilies, Nabinae and Prostemmatinae, are distinguished. Trichobothria are present in the number of one to seven pairs located laterally on the scutellum of adult representatives of Prostemmatinae. This feature is commonly used to distinguish this subfamily from Nabinae. Trichobothria are also found on the abdominal tergites of Prostemmatinae nymphs. Similar sensilla have been observed in adult representatives of Nabinae, but their homology has not yet been confirmed. During morphological studies on Nabidae, conducted using scanning electron microscopy, we noticed sensilla resembling trichobothria on the heads of these insects. This discovery prompted us to examine the presence of these structures in damsel bugs more carefully. Imagines of fifteen species of both subfamilies were analysed using a scanning electron microscope. The results present data on the distribution and micromorphology of the trichobothria in damsel bugs. A pair of dorsal and ventral cephalic trichobothria were observed in all of the examined species of subfamily Nabinae. These sensilla were not found on the heads of Prostemmatinae. The results of studies on scutellar trichobothria confirmed the previously known data regarding their occurrence in Prostemmatinae. Moreover, our research showed the presence of these sensory structures in all of the examined Nabinae species: one pair of trichobothria in Arachnocorini, Carthasini, Gorpini and Nabini, and two pairs in Stenonabini. The presence of abdominal trichobothria was shown in Nabini and Stenonabini. In the remaining studied tribes of Nabinae and in the subfamily Prostemmatinae, the presence of structures that could undoubtedly be considered abdominal trichobothria was not found.

Exploring the antibiofilm and toxicity of tin oxide nanoparticles: Insights from in vitro and in vivo investigations.

BACKGROUND INFORMATION: The advancement of biological-mediated nanoscience towards higher levels and novel benchmarks is readily apparent, owing to the use of non-toxic synthesis processes and the incorporation of various additional benefits. This study aimed to synthesize stable tin oxide nanoparticles (SnO2-NPs) using S. rhizophila as a mediator. METHODS: The nanoparticles that were created by biosynthesis was examined using several analytical techniques, including Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM), X-ray diffraction (XRD), UV-visible (UV-vis) spectroscopy, and energy dispersive X-ray spectroscopy (EDS). RESULTS: The results obtained from the characterization techniques suggest that S. rhizophila effectively catalyzed the reduction of SnCl2 to SnO2-NPs duration of 90 min at ambient temperature with the ƛmax of 328 nm. The size of the nano crystallite formations was measured to be 23 nm. The present study investigates nanoscale applications' antibacterial efficacy against four bacterial strains, including Klebsiella Sp, Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli. The observed zone of inhibition for the nanoparticles (NPs) varied from 10 to 25 mm. The research findings demonstrate that the nanoparticles (NPs) are effective as antibacterial, phytotoxic, and cytotoxic agents.

Detection and Identification of Various Microplastics in Different Orthodontic Adhesives.

Background Microplastics are acknowledged as significant environmental contaminants. The clinical use of dental materials, particularly adhesives containing plastic polymers, can give rise to the production of plastic micro- and nanoparticles, which subsequently find their way into the environment. The aim of the study was to detect different microplastics and identify them in various orthodontic adhesives. Materials and methods Four different light cure orthodontic adhesives, including Transbond XT (3M Unitek, Monrovia, CA), Ormco Enlight (Ormco, Orange, CA), Orthofix SPA (Orthofix, Verona, Italy), and Aqualine LC (Tomy International Inc, Tokyo, Japan), were collected and placed in separate Eppendorf tubes. Microplastics present in each adhesive were identified using scanning electron microscopy. Subsequently, each specimen was suspended in hydrogen peroxide, placed within a shaking incubator, and analyzed using Fourier transform infrared spectroscopy (FTIR) to identify the type of polymer. Results The scanning electron microscope shows the surface morphology and the most predominant types of microplastics identified were fibers, fragments, and pellets. FTIR results showed the presence of several major functional groups, including hydroxyl, amine, ester, fluoro, and halo groups. Conclusion When contrasted with the quantity of microplastic waste generated by other sectors like the textile, cosmetic, and fishing industries, the microparticulate waste stemming from dental adhesives has a minimal effect on environmental deterioration. Strategies for addressing this concern should give precedence to reducing the use of these materials and adopting effective recovery methods, which could potentially involve recycling processes.

The Properties of High-Performance Concrete with Manganese Slag under Salt Action.

Manganese slag (MS) containing a certain amount of active hydration substances may be used as a kind of cementitious material. In the present study, we measured the mass, the relative dynamic modulus of elasticity (RDME), and the flexural and compressive strengths of MS high-performance concrete (MS-HPC) with added basalt fibers exposed to NaCl freeze-thaw cycles (N-FCs), NaCl dry-wet alternations (N-DAs), and Na2SO4 dry-wet alternations (NS-DAs). Scanning electron microscope energy-dispersive spectrometer (SEM-EDS) spectra, thermogravimetric analysis (TG) curves, and X-ray diffraction spectroscopy (XRD) curves were obtained. The mass ratio of MS ranged from 0% to 40%. The volume ratio of basalt fibers varied from 0% to 2%. We found that, as a result of salt action, the mass loss rate (MLR) exhibited linear functions which were inversely correlated with the mass ratio of MS and the volume ratio of basalt fibers. After salt action, MLR increased by rates of 0~56.3%, but this increase was attenuated by the addition of MS and basalt fibers. Corresponding increases in RDME exhibited a linear function which was positively correlated with MS mass ratios in a range of 0~55.1%. The addition of MS and basalt fibers also led to decreased attenuation of mechanical strength, while the addition of MS led to increased levels of flocculent hydration products and the elements Mn, Mg, and Fe. CaClOH and CaSO4 crystals were observed in XRD curves after N-DA and NS-DA actions, respectively. Finally, the addition of MS resulted in increased variation in TG values. However, the opposite result was obtained when dry-wet actions were exerted.

Mouse Brain Tissue Preparation for Scanning Electron Microscopy.

Scanning electron microscopy (SEM) is used to observe the surface structure of an object by irradiating an electron beam onto the sample and detecting the reflected and emitted electrons. Because of its large depth of focus, SEM can provide the three-dimensional structure of small surfaces that cannot be observed using an optical microscope. Furthermore, the cross-sectional structure of the tissue can be observed by freeze-cracking. Observing the ultrastructure of organisms that contain large amounts of water in their bodies while maintaining high resolution is challenging; however, this has recently become possible. Here, we explain the fixation and freeze-cracking method for mouse brain samples.

The Synergistic Effect of Ozonated Oil and Desensitising Toothpaste on Dentinal Tubule Occlusion: An In Vitro Study.

Introduction Dentin hypersensitivity (DH) is the most common problem encountered by clinicians. It can be managed either by blocking neural activities or by occluding tubules. Ozonated oil facilitates the simple passage of desensitizing agents into dentinal tubules. Aim This study aimed to evaluate the effect of ozonated oil on dentinal tubule occlusion before and after the application of desensitizing toothpaste. Materials and methods The study was carried out in Kalinga Institute of Dental Sciences, KIIT (Deemed to be University), Bhubaneswar, India. The sample size of the study was 80. The first group contained specimens for control. The second group comprised specimens treated with ozonated oil. The third group comprised specimens being treated with a desensitizing agent. The fourth group contained specimens treated with both the desensitizing agent and ozonated oil. The specimens then received an acid challenge. The specimens were observed under a scanning electron microscope (SEM) before any therapy, after the application of the therapeutic agents and after the 37.5% ortho-phosphoric acid challenge. Results Inferential statistics to compare between the groups was calculated using one-way analysis of variance (ANOVA) statistics. Post-hoc Tukey's honestly significant difference (HSD) was performed to compare the groups. The mean scores of the partial tubular occlusion of Group 1, Group 2, Group 3 and Group 4 before the acid challenge were 0.035, 0.691, 0.564 and 0.368, respectively. The maximum score was obtained in the case of Group 2, which was statistically significant. The mean scores for partial tubule occlusion after the acid challenge for Group 1, Group 2, Group 3 and Group 4 were 0.055, 0.531, 0.733 and 0.142, respectively. There was evidence of maximum partial tubule occlusion after the acid treatment in the case of Group 3. The mean scores of Group 1, Group 2, Group 3 and Group 4 before the acid challenge were 0.019, 0.309, 0.442 and 0.609, respectively. The maximum score was obtained in the case of Group 4, implying a greater number of total tubular occlusions before the acid challenge. The mean scores of the total tubular occlusions after the acid challenge for Group 1, Group 2, Group 3 and Group 4 were 0.047, 0.465, 0.272 and 0.890, respectively. There was evidence of maximum tubule occlusion in the case of Group 4, which was statistically significant. Conclusion Overall, the application of a desensitizing toothpaste with ozonated oil holds promise as a potentially more effective treatment approach for DH. Further research and clinical studies may be needed to fully validate its efficacy and safety in dental practice.

Development of eco-friendly biofilms by utilizing microcrystalline cellulose extract from banana pseudo-stem.

Banana pseudo-stem, often considered as an underutilized plant part was explored as a potential reinforced material to develop an eco-friendly biofilm for food packaging applications. In this study, Microcrystalline cellulose (MCC) was extracted from banana pseudo-stem by alkali and acid hydrolysis treatment. The extracted MCC was used as a reinforced material in different concentrated polyvinyl alcohol (PVA) matrix alone as well as both PVA and Carboxymethyl Cellulose (CMC) matrix to develop biofilm by solvent casting method. The synthesized MCC powder was characterized by scanning electron microscope to ensure its microcrystalline structure and to observe surface morphology. The biofilms composed of MCC, PVA, and CMC were assessed through Fourier-transform infrared spectroscopy (FTIR), mechanical properties, water content, solubility, swelling degree, moisture barrier property (Water Vapor Permeability - WVP), and light barrier property (Light Transmission and Transparency). The FTIR analysis showed the rich bonding between the materials of the biofilms. The film incorporating a combination of PVA, CMC, and MCC (S6) exhibited the highest tensile strength at 26.67 ± 0.152 MPa, making it particularly noteworthy for applications in food packaging. MCC incorporation increased the tensile strength. The WVP content of the films was observed low among the MCC-induced films which is parallel to other findings. The lowest WVP content was showed by 1% concentrated PVA with MCC (S4) (0.223 ± 0.020 10-9 g/Pahm). The WVP content of S6 film was also considerably low. MCC-incorporated films also acted as a good UV barrier. Transmittance of the MCC induced films at UV range were observed on average 38% (S2), 36% (S4) and 6% (S6) which were almost 6% lower than the control films. The S6 film demonstrated the lowest swelling capacity (1.42%) and water content, indicating a significantly low solubility of the film. The film formulated with mixing of PVA, CMC and MCC (S6) was ahead in terms of food packaging characteristics than other films. Also, the outcomes of this study point out that MCC can be a great natural resource for packaging applications and in that regard, banana pseudo-stem proves to be an excellent source for waste utilization.