Age estimation in adults by canine teeth: a systematic review of the Cameriere method with meta-analysis on the reliability of the pulp/tooth area ratio.

The age estimation of an adult using methods accessible to the forensic routine is a goal pursued by forensic experts. Cameriere, Ferrante and Cingolani (2004) proposed the use of the pulp/tooth area ratio of canine teeth as a promising variable, but its reliability has shown conflicting results in the scientific literature. This article aimed to carry out a systematic review with meta-analysis to verify whether the pulp/tooth area ratio of canine teeth includes a variable that can be used alone to estimate dental age in adults. A systematic search was carried out in six databases using keywords related to the theme in Portuguese, English, and Spanish. The study selection process followed pre-established eligibility criteria. Assessments were carried out regarding risk of bias and publication bias of selected studies, and meta-analysis was carried out considering Pearson's correlation coefficient between pulp/tooth area ratio and chronological age as effect measure. Most selected studies showed low risk of bias; no publication bias was found when all studies were considered, and potential publication bias was found when outliers were removed. Despite the high heterogeneity among studies and the need for more research, it could be observed that the pulp/tooth area ratio has strong negative correlation with chronological age, and the pulp/tooth area ratio could be derived from both periapical radiographs and orthopantomographs. Therefore, it is suggested that there is scientific evidence that the pulp/tooth area ratio obtained from canine teeth is reliable for dental age estimation in adults.

Dental age estimation by assessing the pulp volume of five teeth in a peruvian population using cone beam computed tomography images / Estimación de la edad dental evaluando el volumen pulpar de cinco dientes utilizando imágenes de tomografías computarizadas de haz cónico en una población peruana

Abstract Dental age estimation is very important for individual identification in criminal and civil forensic investigations. One of the methods for age estimation is studying age related changes in pulp volume of teeth. The objective of the current study was to estimate dental age from the pulp volume of five different categories of teeth of a Peruvian sample using cone beam computed tomography (CBCT). Retrospective CBCT records of 231 patients (females (134), males (97), age: 12-60 years) were included in the study, categorized into five different age groups (12-19, 20-29, 30-39, 40-49, 50-59, 60 years and older). Dental pulp volume of five categories of teeth(upper canines, left upper central incisors, left upper first molars, lower left first premolars, first molars) were analyzed using Romexis® 5.3.3.5 software for each patient. There was a reduction in the pulp volume of upper right and left canine with age. The Pulp volume was lowest in people aged 60 years and over. Linear regression analysis of the pulp volume and chronological age showed a coefficient of determination of 30%, suggesting a weak correlation. A weak correlation between dental pulp and age is derived. But, a robust large homogenous sample of teeth in future for different age groups may establish a reliable regression equation.

Resumen La estimación de la edad dental en personas vivas y cadáveres es muy importante para la Odontología Forense, sobre todo en casos de identificación en investigaciones legales y sociales. El objetivo del estudio fue estimación de la edad dental mediante la medición del volumen pulpar de imágenes dentales en tomografía computarizada de haz cónico (TCHC) de pacientes peruanos. Fueron analizadas 231 TCHC de pacientes entre 12 a 60 años a más. (Mujeres (134), hombres (97)) se dividieron en seis grupos de edad (12-19, 20-29, 30-39, 40-49, 50-59, 60 años a más). El análisis volumétrico de la pulpa dental se realizó en un total de 1155 dientes (caninos superiores, incisivos centrales superiores izquierdos, primeros molares superiores izquierdos y primeros premolares inferiores izquierdos), mediante el software Romexis® 5.3.3.5. El análisis de regresión lineal mostró un coeficiente de determinación del 30% que sugiere una correlación débil entre la relación del volumen pulpar de los dientes y la edad. El volumen pulpar de los caninos superiores derecho e izquierdo disminuyó a medida que aumentaba la edad y el volumen pulpar en dientes de personas de 60 años a más fue el más bajo. Sin embargo, se pueden proponer estudios futuros para incluir una gran muestra homogénea de dientes en diferentes categorías y grupos de edad para confirmar la correlación y establecer una ecuación de regresión confiable.

Combining the third molar mineralization to further improve the accuracy of the Kvaal's method in dental age estimation of subadults in northern China.

The morphological changes based on deposition of secondary dentin and mineralization of the third molar have been proven to be related to chronological age. However, Kvaal's method on the theory of deposition of secondary dentin was controversial with respect to dental age estimation in the recent research. The aim of this study was to combine the parameters of Kvaal's method with relatively high correlation coefficients and mineralization stages of the third molar to improve the accuracy of predicting the dental age of subadults in northern China. A total of 340 digital orthopantomograms of subadults aged from 15 to 21 years were analysed. A training group was used to test the accuracy of the original Kvaal's method and to establish novel methods for subadults in northern China. A testing group was used to compare the accuracy of the newly established methods with the Kvaal's original method and with published method specifically used in northern China. To increase the feasibility of our estimation model, we combined the mineralization of the third molar to build a combined specific formula. The results showed that the combined specific model increased the coefficient of determination to 0.513, and the standard error of the estimate was reduced to 1.482 years. We concluded that the combined specific model based on the deposition of secondary dentin and mineralization of the third molar could improve the accuracy of dental age assessment of subadults in northern China. Key Points: The decrease in the dental pulp cavity based on deposition of secondary dentin is a useful variable for assessing age.A total of 340 orthopantomographs were used in this research, including 278 in training groups and 62 in testing groups.Original Kvaal's method underestimated the dental age for subadults in northern China.The equation of combined specific method constructed in our study was proved more suitable to calculate dental age for subadults in northern China.

Axin2-CreERT2 mediated knockout of bone morphogenetic protein receptor type 1A caused abnormal secondary dentine and altered cell fate of Axin2-expressing odontogenic cells.

AIM: Inducing odontogenic differentiation and tubular dentine formation is extremely important in dentine repair and tooth regeneration. Bone morphogenic proteins (BMPs) signalling plays a critical role in dentine development and tertiary dentine formation, whilst how BMPR1A-mediated signalling affects odontoblastic differentiation of Axin2-expressing (Axin2+ ) odontogenic cells and tubular dentine formation remains largely unknown. This study aims to reveal the cellular and molecular mechanisms involved in the formation of secondary dentine. METHODOLOGY: Axin2lacZ/+ mice harvested at post-natal 21 (P21) were used to map Axin2+ mesenchymal cells. Axin2CreERT2/+ ; R26RtdTomato/+ mice and Axin2CreERT2/+ ; R26RDTA/+ ; R26RtdTomato/+ mice were generated to observe the tempo-spatial distribution pattern of Axin2-lineage cells and the effect of ablation of Axin2+ cells on dentinogenesis, respectively. A loss-of-function model was established with Axin2CreERT2/+ ; Bmpr1afl/fl ; R26RtdTomato/+ (cKO) mice to study the role of BMP signalling in regulating Axin2+ cells. Micro-computed tomography, histologic and immunostainings, and other approaches were used to examine biological functions, including dentine formation, mineralization and cell differentiation in cKO mice. RESULTS: The results showed rich expression of Axin2 in odontoblasts at P21. Lineage tracing assay confirmed the wide distribution of Axin2 lineage cells in odontoblast layer and dental pulp during secondary dentine formation (P23 to P56), suggesting that Axin2+ cells are important cell source of primary odontoblasts. Ablation of Axin2+ cells (DTA mice) significantly impaired secondary dentine formation characterized with notably reduced dentine thickness (Mean of control: 54.11 µm, Mean of DTA: 27.79 µm, p = .0101). Furthermore, malformed osteo-dentine replaced the tubular secondary dentine in the absence of Bmpr1a with irregular cell morphology, abnormal cellular process formation and lack of cell-cell tight conjunction. Remarkably increased expression of osteogenic markers like Runx2 and DMP1 was detected, whilst DSP expression was observed in a dispersed manner, indicating an impaired odontogenic cell fate and failure in producing tubular dentine in cKO mice. CONCLUSIONS: Axin2+ cells are a critical population of primary odontoblasts which contribute to tubular secondary dentine formation, and BMP signalling pathway plays a vital role in maintaining the odontogenic fate of Axin2+ cells.

Estimation of dental age using the kvaal method with digital panoramic radiographs in peruvian adults / Estimación de la edad dental según el método de Kvaal con radiografías panorámicas digitales en adultos peruanos

To determine the accuracy of the Kvaal method in the estimation of dental age through the analysis of digital panoramic radiographs of patients between 20 and 47 years of age who attended the stomatological clinic of the Universidad Científica del Sur, (2018 to 2019), Lima-Perú. 289 digital panoramic radiographs belonging to individuals of both sexes, aged 20 to 47 years were analyzed. Length and width measurements were obtained in the dental and pulp chamber in the upper central incisors. These data were subsequently evaluated by calculating the proportions between the pulp and root length of the upper central incisor by applying the formula of the method of Kvaal et al. to obtain the accuracy of the method in estimating dental age. Applying the formula of Kvaal et al. indicates that the relationship between the width of the pulp and the length of the root has a higher level of significance in relation to others proportions: M mean value of all ratios except T (-0.659) and W-L difference between W and L (-0.643). The coefficient of determination (r²) and standard error of estimation (SEE) using the original Kvaal formula is r²: 0.70, SEE: 4.90 years, then a modified Kvaal formula was proposed for the Peruvian population. The Method of Kvaal et al. has an accuracy of 1.24 in estimating the dental age of individuals, using the upper central incisor in digital panoramic radiographs.

Determinar la precisión del método de Kvaal en la estimación de la edad dental mediante el análisis de radiografías panorámicas digitales de pacientes entre 20 a 47 años atendidos en la clínica estomatológica de la Universidad Científica del Sur, (2018 a 2019), Lima-Perú. Se analizaron 289 radiografías panorámicas digitales pertenecientes a individuos de ambos sexos, de 20 a 47 años. Se obtuvo medidas de longitud y anchura en la cámara dental y pulpar en los incisivos centrales superiores. Estos datos se valoraron posteriormente al calcular las proporciones entre la pulpa y longitud de la raíz del incisivo central superior aplicando la fórmula del método de Kvaal et al. para obtener la precisión del método en la estimación de la edad dental. Al aplicar la fórmula de Kvaal et al. indica que la relación entre la anchura de pulpa y la longitud de la raíz presentan un nivel de significancia mayor en relación a otras proporciones: M valor medio de todas las proporciones excepto T (-0.659) y W-L: diferencia entre los valores de W y L (-0.643). El coeficiente de determinación (r²) y el error estándar de la estimación (SEE) utilizando la fórmula original de Kvaal es de r²: 0.70, SEE: 4.90 años, después se propuso una fórmula modificada de Kvaal para la población peruana. El Método de Kvaal et al. tiene una precisión del 1.24 en la estimación de la edad dental de los individuos, utilizando el incisivo central superior en radiografías panorámicas digitales.

Regressive changes of crown-root morphology and their volumetric segmentation for adult dental age estimation.

Cone-beam computed tomography (CBCT) enables the assessment of regressive morphological changes in teeth, which can be used to predict chronological age (CA) in adults. As each tooth region is known to have different correlations with CA, this study aimed to segment and quantify the sectional volumes of the tooth crown and root from CBCT scans to test their correlations with the chronological age (CA). Seventy-five CBCT scans from individuals with age between 20 and 60 years were collected retrospectively from an existing database. A total of 192 intact maxillary anterior teeth fulfilled the eligibility criteria. The upper tooth volume ratio (UTVR), lower tooth volume ratio (LTVR), and sex were used as predictor variables. The UTVR and LTVR parameters were both found to be differently correlated to CA and independent from each other. Regression models were derived from each tooth, with the highest R2 being the maxillary lateral incisor (R2  = 0.67). Additional single predictor models using each ratio were capable of reliably predicting the CA. The segmentation approach in volumetric adult dental age estimation proved to be beneficial in enhancing the reliability of the regression model.

Age estimation in Western Indian population by Cameriere's and Drusini's methods.

Objectives: The aim of the present study is to determine applicability of Cameriere's and Drusini's methods in Western Indian population. Methodology: Panoramic radiographs of total 300 Gujarati individuals, equally divided into four study groups were studied by two investigators. The pulp/tooth area ratio (AR) were calculated for maxillary and mandibular canines and tooth coronal indexes (TCI) i.e., the ratio between coronal pulp cavity height and crown height were calculated for mandibular premolars and first and second molars. The acquired data were subjected to correlation and regression analysis and also inter and intraobserver reliability was obtained for both the investigators. Results: The ARs and TCIs for all the respective teeth were significantly correlated with the age of the individuals. The individual regression formulae were derived for all the teeth and were then used separately to calculate the age. There was no statistically significant difference between the mean chronological age and mean calculated age for all the teeth.(P > 0.05). The mean absolute errors for all the teeth were <10 years. Conclusion: The findings of this study prove the applicability of Cameriere's and Drusini's age estimation methods for Western Indian population. However, the weak correlation coefficients suggest the need for further studies to get more accurate results.

The impact of age mimicry bias on the accuracy of methods for age estimation based on Kvaal's pulp/tooth ratios: a bootstrap study.

INTRODUCTION: Methods based on pulp/tooth ratios proposed by Kvaal et al. (1995) have been widely used for age estimation in adults. The tendency of age estimates to mimic the age structure of the reference population, i.e. age mimicry bias, is a possible source of controversy in the results of studies. The primary objective of the present study was to evaluate the effect of age mimicry bias on the accuracy of the original Kvaal's method and its recent modification proposed by Roh et al. (2018). METHOD AND MATERIAL: The study sample comprised 240 cone-beam computed tomography scans of an Iranian population. The bootstrap procedure was used to study the impact of age mimicry bias on age estimates by constructing reference populations with different age structures. The accuracy of Kvaal's and Roh's variables for age estimation was assessed using a twofold cross-validation technique and principal component analysis. RESULTS: The application of original equations resulted in SEE values highly greater than the acceptable threshold for forensic purposes (10 years). The population-specific equations obtained SEE values of 9.18, 11.03, and 9.22 years using Kvaal's variables and 9.19, 11.13, and 9.14 years using Roh's variable for the maxillary, mandibular, and all teeth, respectively. The bootstrap procedure revealed that using uneven reference populations to formulate the equation resulted in significantly greater SEEs (almost all >10 years) that were not acceptable for forensic purposes. Moreover, using an older (a younger) reference population contributed to a sharp rise in the amount of over- (under-) estimation for younger (older) age groups. CONCLUSION: Age mimicry bias had an undesirable impact on the accuracy of dental age estimation based on Kvaal's and Roh's methods. The accuracy of the original equations was low for age estimation in the Iranian sample. However, the performance of the population-specific equations was reasonably acceptable for the maxillary and all six teeth.

Comparing the pulp/tooth area ratio and dentin thickness of mandibular first molars in different age groups: A cone-beam computed tomography study.

CONTEXT: Mandibular first molar frequently requires endodontic treatment. Understanding age-related changes in pulp-dentin complex and root canal morphologies is essential for successful endodontic and restorative treatments. AIM: This study aimed to compare pulp/tooth area ratio (PTAR) and dentin thickness (DT) in mandibular first molars in different age groups through cone-beam computed tomography (CBCT) imaging. SUBJECTS AND METHODS: One hundred CBCT images of mandibular first molar were divided into five groups; age 20-29, 30-39, 40-49, 50-59, and 60 years old and older. Axial images were used to determine PTAR at Level A (furcation), Level B (between Levels A and C), and Level C (half distance between the furcation and apex of the root). The minimum DT of the distal wall of mesiobuccal (MB) and mesiolingual (MLi) canal and mesial wall of distal canal at 2 and 3 mm under the furcation was measured. STATISTICAL ANALYSIS USED: Analysis of variance was used to determine differences among age groups. RESULTS: PTAR was determined to reduce as age increases, showing a significant difference among the age groups at Levels A, B, and C of both roots (P < 0.05). The minimum DT was found to increase with age, demonstrating a significant difference among the age groups of MB and MLi canal at 2 and 3 mm (P < 0.05). No statistically significant difference was observed in the mesial DT of distal canal. CONCLUSIONS: The reduction of PTAR and the increasing DT were confirmed with advanced age.

Do upper third molars provide more accurate age estimation in the adult based on the pulp-to-tooth ratio than lower third molars? A cone-beam CT study.

INTRODUCTION: Age-at-death estimation is an essential part of the identification process of individuals in many forensic dentistry cases where identity of the individual cannot be resolved by visual recognition or other means. Dental age estimation in adults is more of a challenge as most teeth complete their development by the age of 18 years. AIM: This study aims at using the mesio-distal (MD) pulp-to-tooth ratio taken at the cervix of upper third molars (UM3) to estimate age at the time of radiographic imaging. MATERIALS AND METHODS: A set of 135 Cone-beam computed tomography (CBCT) radiographs of UM3s for a random sample of 135 Jordanian adults (65 females, 70 males; age range = 18-63 years, mean age = 34.4 years, SD = 11.2 years) were used. Both pulp and tooth MD diameters were measured at the cervix. MD pulp-to-tooth ratios for UM3s were correlated with age. RESULTS: Statistically significant negative moderate correlation was found between the age of the individual and the cervix MD pulp/tooth ratio (r = -0.516). This indicates that only 26.6% of the variation in age can be explained by the cervix MD pulp-to-tooth ratio. CONCLUSIONS: This study concludes that cervix MD pulp-to-tooth ratio of UM3s, although apparently stronger than that of lower M3s (r = -0.361), is not a sufficiently reliable estimator of age in adults, and this is perhaps attributed to the greater variability in the time line of third molars development.

Age-dependent decrease in dental pulp cavity volume as a feature for age assessment: a comparative in vitro study using 9.4-T UTE-MRI and CBCT 3D imaging.

Evaluation of secondary dentin formation is generally suitable for age assessment. We investigated the potential of modern magnetic resonance imaging (MRI) technology to visualize the dental pulp in direct comparison with cone beam computed tomography (CBCT). To this end, we examined 32 extracted human teeth (teeth 11-48 [FDI]) using 9.4-T ultrashort echo time (UTE)-MRI and CBCT (methods). 3D reconstruction was performed via both manual and semi-automatic segmentation (settings) for both methods in two runs by one examiner. Nine teeth were also examined by a second examiner. We evaluated the agreement between examiners, scan methods, and settings. CBCT was able to determine the pulp volume for all teeth. This was not possible for two teeth on MRI due to MRI artifacts. The mean pulp volume estimated by CBCT was consistently higher (~ 43%) with greater variability. With lower variability in its measurements, evaluation of pulp volume using the MRI method exhibited greater sensitivity to differences between settings (p = 0.016) and between examiners (p = 0.009). The interactions of single-rooted teeth and multi-rooted teeth and method or setting were not found to be significant. For examiner agreement, the mean pulp volumes were similar with overlapping measurements (ICC > 0.995). Suitable for use in age assessment is 9.4-T UTE-MRI with good reliability and lower variation than CBCT. For MRI, manual segmentation is necessary due to a more detailed representation of the interior of the pulp cavity. Since determination of pulp volume is expected to be systematically larger using CBCT, method-specific reference values are indispensable for practical age assessment procedures. The results should be verified under in vivo conditions in the future.

Expression of fibroblast growth factor receptor1, -2c, and -3c transcripts in mouse molars after tooth eruption.

A previous study suggested that fibroblast growth factor (FGF) signaling plays an important role in dentin formation during tooth development. In this study, to examine dentin formation after tooth eruption involving secondary and tertiary dentin, we analyzed the expression patterns and expressing cells of Fgfr1, -2c, and -3c in mouse maxillary first molars (M1). Since it is difficult to recover the mRNAs from mineralized tissues, we tested methods for extraction after fixation and decalcification of teeth. We successfully obtained consistent results with quantitative real-time PCR (qPCR) using ß-actin transcripts for validation. qPCR for Dentin sialo phosphoprotein (Dspp), Fgfr1, -2c, and -3c transcripts was performed on mice at ages of 2-20 weeks. The results showed that the highest expression levels of Dspp and Fgfr2c occurred at 2 weeks old followed by lower expression levels after 4 weeks old. However, the expression levels of Fgfr1 and Fgfr3c were constant throughout the experimental period. By in situ hybridization, Dspp, Fgfr1, and Fgfr3c transcripts were detected in odontoblasts at ages of 2 and 4 weeks. In addition, Dspp and Fgfr1 transcripts were detected in odontoblasts facing reactionary dentin at 8 weeks old. These results suggest that FGF-FGFR signaling might be involved in the regulation of odontoblasts even after tooth eruption, including secondary and tertiary dentin formation. Moreover, our modified method for extracting mRNA from mineralized tissues after fixation and decalcification successfully produced consistent results.

Dimensão da polpa dentária como biomarcador para a estimativa da idade em adultos: revisão de literatura / Dimension of dental pulp as a biomarker for estimating the age of adults: literature review

A estimativa de idade por meio de análise dentária é comprovada e está consolidada na literatura. O padrão de desenvolvimento do dente e a erupção dentária são indicadores fidedignos para determinar a idade de indivíduos jovens com até 16 anos. No entanto, com a dentição permanente estabelecida, a idade cronológica apenas pode ser presumida com base nas mudanças fisiológicas. O estreitamento da cavidade pulpar provocado pela deposição de dentina secundária ao longo da vida em todas as paredes pulpares tem sido aceito como biomarcador confiável para estimar a idade em adultos. O presente estudo constitui uma revisão de literatura que reúne dados sobre os métodos de estimativa de idade baseados nas dimensões da polpa dentária de adultos. O objetivo é fornecer embasamento científico para o desenho de um estudo que utilizará exames de tomografia computadorizada de feixe cônico para propor um modelo de estimativa de idade dentária específico para a população brasileira.

The age estimation through dental analysis is widely proved and consolidated in the literature. Dental eruption and tooth development are reliable indicators to estimate the age of young individuals up to 16 years of age. Although having an established permanent dentition, the chronological age can only be established with physiological changes. The narrowing of the pulp cavity, through life sedimentations of secondary dentin on all pulp walls, has been accepted as a reliable biomarker to estimate age in adults. This study presents a literature review of age determination methods through dental pulp dimensions in adults. The objective is to provide scientific background for further researches regarding the usage of cone-beam computed tomography scans to propose a dental age estimation model specific to the Brazilian population.

Evaluation of secondary dentin formation for forensic age assessment by means of semi-automatic segmented ultrahigh field 9.4 T UTE MRI datasets.

Dental methods are an important element of forensic age assessment of living persons. After the development of all the teeth, including third molars, is completed, degenerative characteristics can be used to assess age. The radiologically detectable reduction of the dental pulp cavity has been described as such a feature. We investigated the suitability of ultrahigh field 9.4 T ultrashort time echo (UTE) magnetic resonance imaging (MRI) for the evaluation of pulp cavity volume in relation to the total tooth volume in 4 extracted human teeth. The volume calculations were performed after semi-automatic segmentation by software AMIRA using the different intensities of the structures in the MRI dataset. The automatically selected intensity range was adjusted manually to the structures. The visual distinction of pulp and tooth structure was possible in all cases with in-plane resolution < 70 µm. Ratios of tooth/pulp volume were calculated, which could be suitable for age estimation procedures. Intensity shifts within the pulp were not always correctly assigned by the software in the course of segmentation. 9.4 T UTE-MRI technology is a forward-looking, radiation-free procedure that allows the volume of the dental pulp to be determined at high spatial resolution and is thus potentially a valuable instrument for the age assessment of living persons.

Evaluation of secondary dentin deposition in lower first molars to indicate a legal age threshold of 14 years using receiver operating characteristic curves.

The age threshold of 14 years has become vital in proving legal violations involving children, particularly in cases of suspected child labour, child pornography and the minimum age of criminal responsibility. In recent years, there has been great interest in the evaluation of age in children and sub-adults using analysis of regressive changes in teeth, with a particular focus on age thresholds that are of medico-legal importance. This research aimed to compare the sensitivity and specificity of stages of root pulp visibility by Olze et al. in a sample of South Indian children aged between 12 and 16 years, with an age threshold of 14 years, using receiver operating characteristic curves and the area under the curve (AUC). Among the four stages of root pulp visibility, stage 2 showed the highest AUC in both female and male cohorts. For stage 2, lower sensitivity and higher specificity values were recorded, indicating the possibility of type II errors (i.e. false negatives). In both sexes, stage 2 had a higher AUC (i.e. 0.696 in females and 0.706 in males, respectively). Based on our findings, it can be concluded that this staging method in lower first molars is of limited value in indicating the legal age threshold of 14 years. Future research should validate the proposed approach in a larger sample and consider how to improve predictions in this area.

Age estimation of fragmented human dental remains by secondary dentin virtual analysis.

Unlike bones, teeth are remarkably resilient and can withstand severe trauma, making age assessment based on the dentition essential for forensic analysis. Modern techniques for age estimation focus on pulp-chamber volume measurements using radiographs and computerized tomography (CT); however, these are applicable only for complete teeth (i.e., with intact crown and root). In the current study, we developed a new approach using high-resolution micro-computerized tomography (µCT) to visualize the secondary dentin (SD), an inner layer surrounding the pulp which accumulates with age, thus facilitating age estimation of fragmented and broken teeth.The growth pattern of the SD with age was analyzed for 77 lower premolars from two anthropological collections. A comparison of SD virtual segmentation and histological measurement was highly correlative (ICC = 0.95). SD was measured per volume (mm3) of a 1 mm thick slice directly below the cemento-enamel junction. Regression analysis using SD measurements increased the success rates of age estimation (82%) compared with the "gold-standard" pulp/dentin method (54%) in the range of ± 10 years. The accuracy of age estimation based on SD analysis was improved to a range of 7-8 years.The SD method thus allows age estimation with greater prediction rates and better accuracy based on only a small fragment of a tooth in a non-invasive manner. This novel methodology is easy to use, accessible, and bears implications in various fields such as forensic sciences and anthropological research.

Age and sex estimation based on pulp cavity volume using cone beam computed tomography: development and validation of formulas in a Brazilian sample.

OBJECTIVES: To develop and validate formulas for age and sex estimation based on the pulp cavity volume of teeth using cone beam CT. METHODS: The sample was composed of 116 cone beam CT scans from Brazilian individuals of both sexes, ranging in age from 13 to 70 years. A total of 232 teeth (upper central incisors and canines) were evaluated. Two calibrated examiners determined pulp cavity volumes using the ITK-SNAP software. Pearson's correlation test was used to assess the correlation between chronological age and pulp volume. Linear and logistic regression models were developed for age and sex estimation, respectively, and were validated in another sample of 72 teeth. RESULTS: Pearson's correlation coefficients between age and pulp volume were negative and significant (p < 0.0001) for both teeth (r = -0.8782 for central incisors and r = -0.8738 for canines). The age estimation formulas showed good determination coefficients (adjusted R² = 0.7614 to 0.8367). For sex estimation, when the age was known, the coefficients were also good (adjusted R² = 0.649 to 0.812). However, when the age was unknown, the coefficients of the sex estimation formulas were low (adjusted R² = 0.047 to 0.393). Validation showed high accuracy of age estimation in individuals older than 35 years, as well as high accuracy of sex estimation when the age was known. CONCLUSIONS: Our formulas provided excellent results and can be applied to the Brazilian population. The best results were observed for age estimation in females and for sex estimation when the age was known.

Age estimation using pulp/enamel volume ratio of impacted mandibular third molars measured on CBCT images in a northern Chinese population.

The present study aims to evaluate the relation between chronological age and the ratio of pulp volume (PV) to enamel volume (EV) of impacted mandibular third molars (IMTMs) by using cone-beam computed tomography (CBCT) images and an improved 3D image segmentation technique. A sample of CBCT images of IMTM was collected from 414 northern Chinese subjects (214 male and 200 female clinical patients) ranging in age from 20 to 65 years. The GrowCut effect image segmentation (GCEIS) module algorithm was used to calculate the PV and EV from CBCT images. The total sample was divided into a training group and validation group in a ratio of 7 to 3. The PV/EV ratio (PEr) in the training sample was used to develop a mathematical formula for age estimation as follows: age = - 5.817-21.726 × Ln PEr (p < 0.0001) (Ln, natural logarithm). The mean absolute error (MAE) and root mean square error (RMSE) were used to determine the precision and accuracy of the mathematical formula in the validation group and all samples. The MAEs in the male, female, and pooled gender samples were 9.223, 7.722, and 8.41, respectively, and the RMSEs in the male, female, and pooled gender samples were 10.76, 9.58, and 9.986, respectively. The precise and accurate results indicate that the PEr of IMTM in CBCT images is a potential index for dental age estimation and is possible to be used in forensic medicine.

Relationship Between Pulp Tooth Area Ratio and Chronological Age Using Cone-beam Computed Tomography Images.

This study investigated the relationship between chronological age and pulp tooth area ratio (PTR) in maxillary central teeth using cone-beam computed tomography (CBCT) images in the Turkish population. The sample consisted of CBCT images of 120 male and female subjects between 14 and 75 years old. The PTR of the maxillary central teeth was calculated using inVivo 5 software (Anatomage, San Jose, CA). Data were analyzed with independent t-test and Pearson's rank correlation test. There was a significant negative correlation between chronological age and PTR (r = -0.615). The results showed that the PTR of maxillary central teeth is a reliable method for age estimation in the Turkish population.

Digitized Morphometric Analysis using Maxillary Canine and Mandibular First Molar for Age Estimation in South Indian Population.

BACKGROUND: In recent years, the estimation of age in living individuals have become important to solve judicial or civil problems. Secondary dentin deposition occurs as the age advances and can be measured by calculating the reduction in pulp chamber through Noninvasive radiograph techniques. AIM: The aim is to derive precise population specific formulae for age estimation. MATERIALS AND METHODS: Digitalized Orthopantomography of 150 subjects, was retrieved. The subjects were divided into study and test group. Pulp tooth area ratio was recorded from the maxillary canine and pulp chamber crown root trunk height ratio was recorded from a mandibular first molar. STATISTICAL ANALYSIS: Regression equation was derived from study group subjects and this equation was used to estimate the age of subjects in the test group. RESULTS: No significant differences were seen between mean chronological age and mean estimated age (p-value- 0.157). Mean Absolute Error (MAE) was estimated to be 2.76 years. The percentage of estimated ages in test sample < ± MAE was 72%. The difference was higher in the group I and II (p-value- 0.001 and 0.002). CONCLUSION: The equation derived from the anterior and posterior teeth together gave more accurate results in the present study. The prediction accuracy can further be enhanced by using multiple teeth or by utilizing other linear measurements in the same teeth.