Bioresorbable Polyester Coatings with Antifouling and Antimicrobial Properties for Prevention of Biofilm Formation in Early Stage Infections on Ti6Al4V Hard-Tissue Implants.

Implants made from titanium are used as prostheses because of their biocompatibility and their mechanical properties close to those of human bone. However, the risk of bacterial infection is always a major concern during surgery, and the development of biofilm can make these infections difficult to treat. A promising strategy to mitigate against bacterial infections is the use of antifouling and antimicrobial coatings, where bioresorbable polymers can play an important role due to their controlled degradability and sustained drug release, as well as excellent biocompatibility. In the present study, poly(d,l-lactide) (PDLLA) and poly[d,l-lactide-co-methyl ether poly(ethylene glycol)] (PDLLA-PEG) were studied, varying the PEG content (20-40% w/w) to analyze the effectiveness of PEG as an antifouling molecule. In addition, silver sulfadiazine (AgSD) was used as an additional antimicrobial agent with a concentration ≤5% w/w and incorporated into the PEGylated polymers to create a polymer with both antifouling and antimicrobial properties. Polymers synthesized were applied using spin coating to obtain homogeneous coatings to protect samples made from titanium/aluminum/vanadium (Ti6Al4V). The polymer coatings had a smoothing effect in comparison to that of the uncoated material, decreasing the contact area available for bacterial colonization. It was also noted that PEG addition into the polymeric chain developed amphiphilic materials with a decrease in contact angle from the most hydrophobic (Ti6Al4V) to the most hydrophilic PDLLA-PEG (60/40), highlighting the increase in water uptake contributing to the hydration layer formation, which confers the antifouling effect on the coating. This study demonstrated that the addition of PEG above 20% w/w and AgSD above 1% w/v into the formulation was able to decrease bacterial adherence against clinically relevant biofilm former strains Staphylococcus aureus and Pseudomonas aeruginosa.

Triple Encapsulation and Controlled Release of Vancomycin, Rifampicin and Silver from Poly (Methyl Methacrylate) or Poly (Lactic-Co-Glycolic Acid) Nanofibers.

Although the incidence of infections in orthopedic surgeries, including periprosthetic surgeries, remains low at approximately 1-2%, the number of surgeries and the incidence of drug-resistant bacteria is increasing. The cost and morbidity associated with revision surgeries are huge. More effective drug combinations and delivery methods are urgently needed. In this paper, three anti-infective drugs (vancomycin, rifampicin, and silver sulfadiazine) have been jointly and effectively electrospun in thin (0.1 mm) flexible nanofiber mats of either poly (methyl methacrylate) (PMMA) or poly (lactic-co-glycolic acid) (PLGA). The inclusion of poly (ethylene glycol) (PEG) enabled optimal drug release with a reduced water contact angle for wetting. The controlled release of these three agents from 20% PEG (w/w to polymer)-blended PMMA or PLGA nanofiber mats may allow for the prophylactical prevention of implant-related infections or provide methods to treat orthopedic infections at the time of revision surgeries. These combinations of drugs provide excellent additive or synergistic antibiotic action against a broader spectrum of bacteria than each drug alone.

Effects of aloe vera on burn injuries: A systematic review and meta-analysis of randomized controlled trials.

Burn injuries cause severe pain, infection risks, psychological distress, financial burdens, and mortality, necessitating effective care. Aloe vera, a traditional burn remedy, shows wound healing potential, but its analgesic effects and efficacy with varying burn severity are uncertain. This study aims to investigate aloe vera's impact on wound healing, pain management, and infection prevention in burn patients. A systematic search on PubMed, Embase, and CENTRAL was performed on 9th October 2023 for randomized controlled trials (RCTs). The risk of bias was examined using the Cochrane risk-of-bias tool (version 2), and the meta-analysis was carried out using a random-effects model. The primary outcome was wound healing time, with secondary outcomes examining pain severity and wound infection. The Grading of Recommendations Assessment, Development, and Evaluation (GRADE) approach was used to assess the quality of evidence for each outcome. Nine RCTs were included in the current study, of which six provided data on the primary outcome. Aloe vera significantly reduced mean wound healing time compared to other topicals [mean difference (MD) -3.76 days; 95% confidence interval (CI) -5.69 to -1.84]. Additionally, the meta-analysis of the secondary outcomes found no significant differences in pain reduction (MD -0.76 points; 95% CI -1.53 to 0.01) and wound infection risk (risk ratio 1.10; 95% CI 0.34 to 3.59) between aloe vera and control groups. In conclusion, aloe vera expedites wound healing in second-degree burn patients without increased infection risk compared to other antimicrobial agents. The analgesic effects on burn injuries remain uncertain.

Comparison of In Vitro Bacterial Susceptibility to Common and Novel Equine Wound Care Dressings.

Antimicrobial resistance is becoming a problem of concern in the veterinary field, necessitating the use of effective topical treatments to aid the healing of wounds. Honey has been used for thousands of years for its medicinal properties, but in recent years medical-grade Manuka honey has been used to treat infected wounds. The goal of this study was to determine the relative susceptibility of four common equine wound pathogens to ten different types of antimicrobial agents based on the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). The pathogens studied include ATCC lab-acclimated Pseudomonas aeruginosa, Escherichia coli, and methicillin-resistant Staphylococcus aureus and one from an equine sample submitted to the Colorado State Veterinary Diagnostic Laboratory (Streptococcus equi ssp. zooepidemicus (Streptococcus zooepidemicus)). An additional goal of the study was to describe the comparison of bactericidal activity of medical-grade Manuka honey, local honey, and commercial, food-grade honey to other commonly used wound dressings (20% hypertonic saline, silver sulfadiazine cream, PHMB gauze, and PHMB foam). The objective is to provide veterinary practitioners with comparative data on the use of a variety of antimicrobial dressings for inhibiting the growth of common wound bacteria. MIC and MBC for Manuka, store, and local honeys were comparable to those of sterile gauze, sugar, and hypertonic saline. Across bacterial species, local honey proved to have more bactericidal activity when compared to Manuka honey and commercial, food-grade honey. The MIC and MBC for PHMB gauze and foam was consistently at a higher dilution compared to the other antimicrobials. The majority of antimicrobials exhibited stronger inhibitory and bactericidal activity against a Streptococcus zooepidemicus isolate obtained from a wound compared to other bacteria that were ATCC lab-acclimated. Additional research for in vivo applications needs to be done to see whether differences exist in effective wound management.

Advanced wound healing in a patient with transmetatarsal amputation caused by severe diabetic foot infection: A case report.

Introduction and importance: Diabetic foot accounts for 50% to 95 % of non-traumatic amputations. The healing process of a surgical wound resulting from amputation in the diabetic foot is complex, and it is difficult to achieve an optimal outcome, which should include obtaining a functional stump for the patient. Healing is mainly hindered by infection, vascular disease, and wound size. In turn, biofilm formation significantly delays the healing process, increasing morbidity and impairing the amputee's quality of life. Case presentation: This study analyzes the case of an 80-year-old male patient with diabetes who had failed to respond to previous treatment on an infected wound from a transmetatarsal amputation. The new treatment involved spraying the wound with silver sulfadiazine, lidocaine, and vitamin A aerosol and covering it with gauze dressings soaked in silver sulfadiazine, lidocaine, and vitamin A. The case evolution indicators used were total wound area, percentage of granulation tissue, wound perimeter, and maximum distance between the wound edges. A 3D simulation was also used to assess the wound bed. Clinical Discussion: Biofilm is linked to slower wound healing and wound chronicity, as this community of microorganisms in the wound slows down healing even when there are no apparent signs of infection. Therefore, treatment should be geared toward preventing contamination from leading to biofilm formation. Conclusion: Our results show that silver sulfadiazine, lidocaine, vitamin A gauze dressings, and aerosol have promoted fast and effective healing in a diabetic patient with a wound at high risk of greater amputation.

Hydrogel burn dressing effectiveness in burn pain.

Severe burns are painful and dramatic injuries. Studies show that pain is underestimated and often not adequately treated. This study aims to evaluate the analgesic efficacy of hydrogel burn dressing and silver sulfadiazine, which are two agents commonly used in first-aid dressings for burn patients. This study, designed as a prospective, observational, and cross-sectional study. Study included 64 pediatric patients admitted to our burn center between 01.03.2020 and 01.09.2020 who were examined by our burn service after their first treatment in the emergency dressing room. Two groups of patients were included in the study. Pain level was assessed in the dressing room before and 10 min after the procedure using the Visual Analog Scale and FLACC (Face, Legs, Activity, Cry, Consolability) pain assessment scales.During the study period, Burnaid® was applied to 62.5% of patients (40 patients) and silver sulfadiazine to 37.5% (24 patients). In terms of pain scores, pre-dressing FLACC values were higher in Group B (p = 0.039); post-dressing VAS and FLACC values were significantly lower in group B (p 0.001; p 0.001). In terms of additional analgesia, we found more patients in Group S received analgesics (p 0.001).We believe that its effect on burn wound pain is superior to that of silver sulfadiazine.

96th-hour impact of scalding burns on end organ damage, systemic oxidative stress, and wound healing in rats treated with three different types of dressings.

In this study, we investigated the effects of three different burn dressing treatments, including experimental, silver, and modern dressing materials, on systemic oxidative stress in rats with severe scald burns within the first 96 h. The rats were divided into five groups: a burn group (n = 10), a polylactic membrane (PLM) group (n = 10), a silver sulfadiazine (SSD) group (n = 10), a curcumin group (n = 10), and a control group (n = 10), consisting of equal numbers of female and male rats. In the first four groups, 30% of the rats' total body surface area was scalded at 95°C. The burn group was not treated. Each group was treated with group-name dressing material. The control group was neither treated nor burned. The rats were sacrificed, and blood and tissue samples were obtained at the 96th hour when severe effects of oxidative stress developed postburns. Systemic inflammatory biomarkers and oxidative stress parameters were examined. In addition, apoptosis and organ damage in liver, kidney, lung, and skin tissues were evaluated biochemically and histopathologically. When the parameters were statistically analyzed, we found that systemic levels of oxidative stress and inflammatory damage to liver, kidney, and lung tissues were lower in the three treated groups than in the burn group. We believe that the dressing material's efficacy in the treatment of severe burns may be dependent on its ability to combat oxidative stress and inflammation.

Development and optimization of film forming non-pressurized liquid bandage for wound healing by Box-Behnken statistical design.

The goal of the current investigation was to develop a non-pressurized liquid bandage to promote the healing of wounds by using silver sulfadiazine. A three-factor three level box-behnken statistical design was employed to optimize the drug-loaded liquid bandage. Film-forming liquid bandage was developed by using ethyl-cellulose, dibutyl sebacate, and glycerol. For optimization, ethyl cellulose, dibutyl sebacate, and isopropyl myristate were taken as independent variables while tensile strength, water vapor absorption value, and drying time were taken as dependent variables. The film-forming liquid bandage was evaluated for various parameters like tensile strength, water vapor absorption value, drying time, viscosity, pH, in-vitro drug release studies, in-vivo wound healing studies, and stability studies. The optimized formulation was found with the tensile strength of 68.24 ± 0.24 MPa, water vapor absorption value of 2.00 ± 0.25 %, drying time of 1.75 ± 0.14 min, viscosity of 60 ± 0.5 cPs, pH of 6.0 ± 0.5 and good physicochemical properties with satisfactory film-forming ability. The in-vitro study shows that the release of test formulations was better than the marketed formulation. After 6 h of study, the liquid bandage and marketed formulation showed 41.02 % and 29.32 % of drug release respectively. Significant results were obtained for the in-vivo wound healing studies. Upon comparison with the control group (2.61 mm) and marketed formulation (1.44 mm), rats treated with the optimized formulation exhibited a noticeable improvement in wound contraction (0.8 mm). The liquid bandage after three months of stability testing was found to be stable with optimum. The film-forming liquid bandage was found to be an effective alternative to conventional topical preparations as it develops a thin polymeric layer on the wound and the skin around it and improves comfort for the patient by protecting the wound from external factors and physical harm.

Evaluation of silver sulfadiazine 1%-cerium nitrate 2.2% cream efficacy and safety in moderate to severe burn patients: a single-blind randomized clinical trial.

BACKGROUND: Burn injury is a major global health crisis. Topical antimicrobials such as silver sulfadiazine (SSD) are commonly used for superficial burn wounds. SSD has a broad-spectrum antimicrobial activity and also anti-inflammatory property, but also suffers from some limitations. Therefore, some studies suggest to add cerium nitrate (CN) to SSD, as an immunomodulatory and tanning agent with antitoxic properties, but its effect on patients' mortality, length of hospital stay, and bacterial colonization is contraversial. OBJECTIVES: In this research, we evaluated the efficacy and safety of SSD 1%+CN 2.2% cream in patients with moderate to severe burn. MATERIAL AND METHODS: Twenty-two patients who fulfilled the inclusion criteria randomly were assigned to the intervention (n=7) or control (n=15) group and received SSD 1%+CN 2.2% or SSD cream 1% respectively, once daily until the complete re-epithelization or prepration of the burned skin for grafting. Intesity of pain, re-epithelialization time, required interventions, laboratory and clinical findings and final outcome were recorded. RESULTS: There was no significant difference in re-epithelialization time between the treatment and control groups (P>0.05). The same findings were reported about the required interventions and laboratory and clinical parameters. However, the final outcome and the pain score on third day were significantly better in the treatment group (P=0.017). On the other hand, all patients in the treatment group needed graft surgery. CONCLUSION: Use of SSD 1%+CN 2.2% cream did not significantly improve re-epithelization time or infection occurrence and patients' pain, but also increased graft surgery rate in comparison with SDD 1% cream in moderate to severe burns.

Formulation and In Vivo Evaluation of Biofilm Loaded with Silver Sulfadiazine for Burn Healing.

Infected burned skin is a life-threatening condition, which may lead to sepsis. The aims of this work are to formulate a biofilm composed of silver sulfadiazine (SSD), chitosan (CS), and sodium alginate (SA), and to evaluate its wound-healing effectiveness. A full factorial design was used to formulate different matrix formulations. The prepared biofilm was tested for physicochemical, and in vitro release. The optimized formulation is composed of 0.833% of CS and 0.75% of SA. The release of SSD almost reached 100% after 6 h. The mechanical properties of the optimized formula were reasonable. The antibacterial activity for the optimized biofilm was significantly higher than that of blank biofilm, which is composed of CS and SA, p = 1.53922 × 10-12. Moreover, the in vivo study showed a 75% reduction in wound width when using the formulated SSD biofilm compared to standard marketed cream (57%) and the untreated group (0%).

Effect of silver sulfadiazine on mature mixed bacterial biofilms on voice prostheses.

BACKGROUND: Biofilm formation on voice prostheses disrupts the function and limits the lifespan of voice prostheses. There is still no effective clinical strategy for inhibiting or removing these biofilms. Silver sulfadiazine (SSD), as an exogenous antibacterial agent, has been widely used in the prevention and treatment of infection, however, its effect on voice prosthesis biofilms is unknown. The purpose of this study was to explore the effect of SSD on the mature mixed bacterial biofilms present on voice prostheses. METHODS: Quantitative and qualitative methods, including the plate counting method, real-time fluorescence quantitative PCR, crystal violet staining, the 2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide) (XTT) reduction assay, scanning electron microscopy, and laser confocal microscopy, were used to determine the effect of SSD on the number of bacterial colonies, biofilm formation ability, metabolic activity, and ultrastructure of biofilms in a mature mixed bacterial (Staphylococcus aureus, Streptococcus faecalis and Candida albicans) voice prosthesis biofilm model. The results were verified in vitro on mature mixed bacterial voice prosthesis biofilms from patients, and the possible mechanism of action was explored. RESULTS: Silver sulfadiazine decreased the number of bacterial colonies on mature mixed bacterial voice prosthesis biofilm, significantly inhibited the biofilm formation ability and metabolic activity of mature voice prosthesis biofilms, inhibited the formation of the complex spatial structure of voice prosthesis biofilms, and inhibited the synthesis of polysaccharides and proteins in the biofilm extracellular matrix. The degree of inhibition and removal effect increased with SSD concentration. CONCLUSIONS: Silver sulfadiazine can effectively inhibit and remove mature mixed bacterial voice prosthesis biofilms and decrease biofilm formation ability and metabolic activity; SSD may exert these effects by inhibiting the synthesis of polysaccharides and proteins among the extracellular polymeric substances of voice prosthesis biofilms.

Old Wine in new Bottles: Silver Sulfadiazine Nanotherapeutics for Burn Wound Management.

According to the World Health Organization (WHO), ∼180,000 casualties are recorded every year due to burns, majorly from low- and middle-income countries that require medical attention. For the last 5 decades, silver sulfadiazine (SSD) 1% cream has been the most widely used topical antimicrobial agent for managing burn wound infections. Although SSD is considered the gold standard therapy in burn wound management, however in the last 10 years, several studies have reported the negative impact of SSD on the wound healing process. The therapeutic potential of SSD is restricted by its poor solubility, and antimicrobial action appears only after the dissociation of SSD into silver ions (Ag+) and sulfadiazine (SD). Pharmaceutical researchers and industries are looking for alternative strategies to overcome the challenges and limitations of the available SSD formulation due to rising costs, extensive time commitment, and the high risk of failure associated with the de novo development of new antimicrobial drugs. Recent advances in drug delivery systems nanotechnology-based strategies have had a colossal impact on them, particularly in burn wound management. Nanoparticulate systems and nanotools could be considered as potential drug delivery approaches for burn management. This contemporary review provides an abridgment of the literature on advanced SSD nanotherapeutics and their importance in managing burns.

Blue Light Improves Antimicrobial Efficiency of Silver Sulfadiazine Via Catalase Inactivation.

Background: Blue light exhibits the ability to deactivate catalase present in pathogens, significantly improving the antimicrobial performance of compounds such as hydrogen peroxide (H2O2). However, H2O2 is not used within clinical settings due to its short half-life, limiting its potential applications. In this study, we explore the usage of Food and Drug Administration-approved and clinically used silver sulfadiazine (SSD) as a potential alternative to H2O2, acting as a reactive oxygen species (ROS)-producing agent capable of synergizing with blue light exposure. Materials and methods: For in vitro studies, bacterial strains were exposed to a continuous wave 405 nm light-emitting diode (LED) followed by treatment with SSD for varying incubation times. For in vivo studies, bacteria-infected murine abrasion wounds were treated with daily treatments of 405 nm LED light and 1% SSD cream for up to 4 days. The surviving bacterial population was quantified through agar plating and colony-forming unit quantification. Results: Through a checkerboard assay, blue light and SSD demonstrated synergistic interactions. Against both gram-negative and gram-positive pathogens, blue light significantly improved the antimicrobial response of SSD within both phosphate-buffered saline and nutrient-rich conditions. Examination into the mechanisms reveals that the neutralization of catalase significantly improves the ROS-producing capabilities of SSD at the exterior of the bacterial cell, producing greater amounts of toxic ROS capable of exerting antimicrobial activity against the pathogen. Additional experiments reveal that the incorporation of light improves the antimicrobial performance of SSD within methicillin-resistant Staphylococcus aureus (MRSA)- and Pseudomonas aeruginosa strain 1 (PAO-1)-infected murine abrasion wounds. Conclusions: As an established, clinically used antibiotic, SSD can act as a suitable alternative to H2O2 in synergizing with catalase-deactivating blue light, allowing for better translation of this technology to more clinical settings and further implementation of this treatment to more complex animal models.

Combined Silver Sulfadiazine Nanosuspension with Thermosensitive Hydrogel: An Effective Antibacterial Treatment for Wound Healing in an Animal Model.

Introduction: Silver sulfadiazine (AgSD) is widely used in burn wound treatment due to its broad-spectrum antibacterial activity. However, its application in wound healing is greatly hindered by the low solubility of AgSD particles and their cellular cytotoxicity. Herein, we studied the safety and in vivo efficacy of nano-sized silver sulfadiazine loaded in poloxamer thermosensitive hydrogel (NS/Gel). Methods: In NS/Gel, silver sulfadiazine was prepared into silver sulfadiazine nanosuspension (NS) to improve the solubility and enhance its antibacterial activity, whereas the poloxamer thermosensitive hydrogel was selected as a drug carrier of NS to achieve slow drug release and reduced cytotoxicity. The acute toxicity of silver sulfadiazine nanosuspension was first evaluated in healthy mice, and its median lethal dose (LD50) was calculated by the modified Karber method. Furthermore, in vivo antibacterial effect and wound healing property of NS/Gel were evaluated on the infected deep second-degree burn wound mice model. Results: The mortality ratio of mice was concentration-dependent, and the LD50 for silver sulfadiazine nanosuspension was estimated to be 252.1 mg/kg (230.8 to 275.4 mg/kg, 95% confidence limit). The in vivo dosages used for burn wound treatment (40-50 mg/kg) were far below LD50 (252.1 mg/kg). NS/Gel significantly accelerated wound healing in the deep second wound infection mice model, achieving > 85% wound contraction on day 14. Staphylococcus aureus in the wound region was eradicated after 7 days in NS/Gel group, while the bacterial colony count was still measurable in the control group. Histological analysis and cytokines measurement confirmed that the mice treated with NS/Gel exhibited well-organized epithelium and multiple keratinized cell layers compared to control groups with the modulated expression of IL-6, VEGF, and TGF-ß. Conclusion: The combination of silver sulfadiazine nanosuspension and thermo-responsive hydrogel has great potential in clinical burn wound treatment.

3D Printed Chitosan/Alginate Hydrogels for the Controlled Release of Silver Sulfadiazine in Wound Healing Applications: Design, Characterization and Antimicrobial Activity.

The growing demand for personalized medicine requires innovation in drug manufacturing to combine versatility with automation. Here, three-dimensional (3D) printing was explored for the production of chitosan (CH)/alginate (ALG)-based hydrogels intended as active dressings for wound healing. ALG hydrogels were loaded with 0.75% w/v silver sulfadiazine (SSD), selected as a drug model commonly used for the therapeutic treatment of infected burn wounds, and four different 3D CH/ALG architectures were designed to modulate the release of this active compound. CH/ALG constructs were characterized by their water content, elasticity and porosity. ALG hydrogels (Young's modulus 0.582 ± 0.019 Mpa) were statistically different in terms of elasticity compared to CH (Young's modulus 0.365 ± 0.015 Mpa) but very similar in terms of swelling properties (water content in ALG: 93.18 ± 0.88% and in CH: 92.76 ± 1.17%). In vitro SSD release tests were performed by using vertical diffusion Franz cells, and statistically significant different behaviors in terms of the amount and kinetics of drugs released were observed as a function of the construct. Moreover, strong antimicrobial potency (100% of growth inhibition) against Staphylococcus aureus and Pseudomonas aeruginosa was demonstrated depending on the type of construct, offering a proof of concept that 3D printing techniques could be efficiently applied to the production of hydrogels for controlled drug delivery.

Effects and Safety of Different Silver Preparation in Burns Treatment: A Bayesian Network Meta-analysis.

Silver formulation has been used for external use of burn wounds for several decades, mainly including silver sulfadiazine (SSD), nanosilver dressing (NSD), and silver ion dressing (SID). At present, there is no simultaneous comparison of the effects of silver formulation on burn wounds. The databases were retrieved in an orderly manner from the dates of their establishment to May 2020, including PubMed, the Cochrane Library, Web of Science, and Clinical Trials. Then a network meta-analysis was conducted using R and RevMan 5.1 software. A total of 13 randomized controlled trials (RCTs) involving 945 patients with burns were included. A pairwise meta-analysis of the results was presented: the wound healing time in the SID or NSD treatment group was less than that in the SSD group; and in relieving the pain there was a statistical difference between the SSD, SID, or NSD groups. Network meta-analysis of the results was presented: the wound healing time and relieving the pain in the SID or NSD treatment group were less than that in the SSD group, but there was no statistical difference between the SID and NSD groups. The possibility of NSD in the wound healing time being the best treatment was 75.2%, followed by SID (36.6%), and finally SSD (1.1%); and the possibility of NSD being the best relieving the pain was 83.5%; followed by SID (60.0%), and finally SSD (16.3%). According to the evidence, treatment for burns with NSD can improve the wound healing time and relieve the pain of wounds.

Honey-based Silver Sulfadiazine Microsponge-Loaded Hydrogel: In vitro and In vivo Evaluation for Burn Wound Healing.

OBJECTIVE: Silver sulfadiazine has often been used as a topical antibacterial agent for burn wounds. Aim of this study is to develop silver sulfadiazine-loaded microsponge along with honeyimpelled hydrogel for improved burn wound healing activity. METHODS: Microsponge were prepared by quasi-emulsion solvent diffusion method. Formulation variables such as concentration of emulsifier and Internal phase volume were optimized by using 32 factorial design. Further, SSD microsponge-based Hydrogel was prepared using carbopol 934 and honey as natural healing agents. In vitro drug release, ex vivo drug deposition, skin irritancy study, and in vivo antibacterial activity were evaluated for optimized hydrogel formulations. The MTT assay was used to determine the safety of the optimized hydrogel using epidermal keratinocyte (HaCaT) cell lines. RESULTS: At the 12th hour, in vitro drug release was found to be 85.11±0.89. An adjusted microspongeloaded hydrogel increased medication retention ability in the epidermal layers when compared to the commercial product. There was also less application time, no skin irritation, low cytotoxicity on dermal cell lines, and better wound contraction. CONCLUSION: The prepared microsponge-loaded hydrogel can serve as a potential alternative for burn wound as compared to the marketed product.

Acute radiation dermatitis among patients with nasopharyngeal carcinoma treated with proton beam therapy: Prognostic factors and treatment outcomes.

A high incidence of severe acute radiation dermatitis (ARD) has been reported for cancer patients treated by proton beam therapy (PBT). This observational study investigated the prognostic factors and treatment outcomes of ARD among patients with nasopharyngeal carcinoma (NPC) treated with PBT. Fifty-seven patients with newly diagnosed NPC and treated with PBT were enrolled. ARD was recorded weekly based on the criteria of Common Terminology Criteria for Adverse Events version 4.0 at treatment visits (1st to 7th weeks) and 1 week (8th week) and 1 month (11th week) after the completion of PBT. The maximum ARD grade was 1, 2, and 3 in 26 (45.6%), 24 (42.1%), and 7 (12.3%) of the patients, respectively. The peak incidence of grade 2 and 3 ARD was observed during the period of the 6th to 8th weeks. Treatment of ARD included topical corticosteroid alone in 24 (42.1%) patients, topical corticosteroid plus silver sulfadiazine in 33 (57.9%) patients, and non-adhering silicone dressing to cover severe skin wound area in 25 (43.8%) patients. In the 11th week, most grade 2 and 3 ARD had disappeared and 93.0% of the patients had ARD of grade 1 or lower. In the binary logistic regression model, we identified habitual smoking (odds ratio [OR]: 5.2, 95% confidence interval [CI]: 1.3-18.8, P = .012) and N2 to N3 nodal status (OR: 4.9, 95% CI: 1.6-15.4, P = .006) as independent predictors of grade 2 and 3 ARD. The results show ARD is a major concern for patients with NPC treated with PBT, especially those with habitual smoking or advanced nodal status. Topical corticosteroid, silver sulfadiazine, and non-adhering silicone dressing are effective for treating ARD induced by PBT.

Antibacterial and Wound Healing Activity of 2% Formulation of 2-Medpy-3-CN on Infected Burn Wounded Animal Model

@#Introduction: Humans have learned to recognize and process plants into medicinal forms through centuries. Burns can spread to other tissues, especially when infected with bacteria such as Methicillin-Resistant Staphylococcus aureus (MRSA). The study aimed to assess the in vivo antibacterial and wound healing activity of 2% formulation of 2-Medpy-3-CN on infected burn wounded animal model. Methods: In vitro antibacterial activity of the Alsti was done by broth dilution and disc diffusion methods. Alsti 2% ointment was prepared for the infected burn wound treatment. A total of 18 rats are grouped into A, B, C, and D, the first three groups (A-C) were injured thermally, and Group D was used as healthy controls. The three test Groups were exposed to MRSA ATCC 43300 at 105 CFU/mL. Group A was treated with 2% Alsti, Group B with Silver sulfadiazine 1% (SSD), and Group C was untreated. Wounds healing was assessed by the healed area and microscopic identification of hematoxylin and eosin (H&E)-stained skin tissue. Results: Wound healing progresses with application of Alsti 2% ointment as observed through wound diameter and histopathological changes of the skin. Wound diameter decreases with treatments, while the contrary was observed in the non-treated group. Microscopic observation of the stained skin showed that epidermal development, and collagen formation progress with treatment days. Untreated wounds showed marked inflammation, progressive ulceration, and necrosis. Conclusion: Alsti 2% formulation showed antibacterial and wound healing activities, hence, can be used as alternative in burn wound infections.

A Systematic Review and Meta-Analysis Comparing Burn Healing Outcomes Between Silver Sulfadiazine and Aloe vera.

Burn wounds remain a prevalent problem in the developed and developing world. A multitude of remedies has been tested. This study evaluated the healing time of second- and third-degree burn wounds between silver sulfadiazine (SSD) and Aloe vera (AV). In July 2020, a systematic review of MEDLINE (Ovid) and PubMed (National Library of Medicine) was performed to identify studies that reported healing of second- and third-degree burns using either SSD or AV. Articles meeting the inclusion criteria were screened and carefully analyzed. Our goal was to report the healing time for these burns using SSD and AV. A total of eight studies published between 1988 and 2018 reporting healing of second- and third-degree burns using SSD and AV were included in this review. Six were cohort studies and two were randomized controlled trials. The studies included both animal and human subjects. The meta-analysis demonstrated that the mean time to wound healing favored AV (RR: -1.34, 95% CI: -1.8 to 0.9, p < 0.001). It would seem that time to healing benefitted those burns in which AV was utilized. In conclusion, increased consideration and emphasis should be placed on using AV to aid the healing of second- and third-degree burns.