Maxillary sinus lift augmentation: A randomized clinical trial with histological data comparing deproteinized bovine bone grafting vs graftless procedure with a 5-12-year follow-up.

INTRODUCTION: Different protocols and procedures for sinus lift and implant placement are available, generally involving the use of grafts to increase the tissue volume and/or prevent the Schneiderian membrane from collapsing. Among xenografts, deproteinised bovine bone graft (DBBP) is frequently used in sinus lift procedures. Leaving an ungrafted space following membrane elevation has proven to have a bony regenerative potential as well. This study aimed to compare the clinical and histological features of sinus lift surgery performed with or without biomaterials. METHODS: Patients with severe maxillary posterior atrophy (residual bone height 2-6 mm and residual crest thickness ≥4 mm), and in need of sinus lift surgery to allow the placement of three implants were enrolled and randomly divided into two groups. They underwent sinus lifts with DBBP (control) or with a graftless technique (test) and immediate placement of two implants (a mesial and distal one). After 6 months, a bone sample was retrieved from the area between the previously inserted fixtures, and a third, central implant was placed. The collected bone samples were analyzed morphologically and histomorphometrically. The patients were provided with prosthetic restorations after 6 months and followed up for 5-12 years. RESULTS: Ten patients were enrolled in the test and nine in the control group. The 6-month follow-up showed in the control group an average augmentation of 10.31 mm (±2.12), while in the test group it was 8.5 mm (±1.41) and a success rate of 96.3% in the control and 86.7% in the test group (p > 0.05). The histological analysis evidenced the presence of new bone tissue surrounded by immature osteoid matrix in the test group, and a variable number of DBBP particles surrounded by an immature woven bone matrix in the control group. CONCLUSION: The results of the present trial indicate that, with residual bone height of 2-6 mm and residual crest thickness ≥4 mm, sinus lift surgery with or without biomaterials followed by implant restoration, produces similar clinical and histological outcomes.

Sinus Savvy: Exploring the Current Techniques of Maxillary Sinus Augmentation.

Sinus ridge augmentation is a surgical procedure aimed at increasing the volume of bone in the posterior maxilla to permit successful dental implant placement. The current review article presents an overview of various techniques used for sinus ridge augmentation, including the lateral window technique, crestal approach, transalveolar technique, and piezoelectric osteotomy. The article examines the advantages and limitations of each technique, such as invasiveness, surgical difficulty, and the requirement for additional procedures. Additionally, the article discusses the factors that influence the success of the procedure, including patient age, residual bone height, and the kind of bone graft substance used. The review also emphasizes the importance of proper case selection, surgical planning, and postoperative care to ensure optimal outcomes. Overall, the article provides valuable insights into the current techniques used for sinus ridge augmentation, highlighting the need for further research to improve patient outcomes and the success of placing dental implants over the long run.

Croco Eye Technique: Mucous Retention Cyst Excision with Immediate Open Sinus Lift-A Retrospective Cohort Study.

Objectives: A mucous retention cyst is a common, asymptomatic lesion that may cause complications during or after the sinus lift procedure. The goal of this study is to assess the effectiveness of the Croco Eye Technique (CET), which allows simultaneous excision of the cyst and sinus floor elevation. Methods: The technique was thoroughly described in two versions, and the group of 33 patients was analyzed. Patients who qualified for this procedure had insufficient alveolar ridge height, and their CBCT showed radiological images typical for retention cysts. Analyzed parameters included the version of CET, demographic data, anatomical parameters, intraoperative complications, recurrence of the cyst, success rate of the sinus lift and implants, and the follow-up period. Results: Out of the 33 cases, 9 were of the primary version (27.27%) and 24 of the final version (72.73%). The average height of a retention cyst was 24.05 mm, with the average alveolar ridge height of 1.86 mm. In three cases (9.09%), implants were placed immediately. The prevalence of uncontrolled Schneiderian membrane perforation was reduced from 55.56% to 4.17% between the primary and final versions. The cyst's recurrence rate was 3.13%. The implant survival rate was 100%. The mean follow-up period was 48.625 months (max 110 months). Conclusions: The Croco Eye Technique, despite the perforation of the Schneiderian membrane, enables successful sinus lift and implantation with a success rate of 100%. Excision of the retention cyst, which is the cause of perforation, allows for limiting the risk of the cyst's recurrence.

Clinical achievements of implantology in the pterygoid region: A systematic review and meta-analysis of the literature.

The purpose of the study is to evaluate the survival rate of pterygoid implants compared to implants placed in different maxilla area and to settle as an alternative solution for the rehabilitation of the posterior maxilla atrophy. Studies that were included for this systematic review were selected using different database of references: PubMed Medline, Lilacs and Cochrane Library. Other journal platforms were also used for the research. Five articles met the strict inclusion/exclusion criteria of the 180 articles founded. This systematic review was registered on Prospero (CRD42023409706) and followed PRISMA statement. A total of 768 implants placed presented 97.43 % with a peak of 100 % of survival rate. Follow-up period varies from a minimum of 1 year to a maximum of six years. Pterygoid implants could be a valid alternative in patients presenting a posterior maxilla atrophy, but results should be interpreted cautiously due to the difficulty of the surgical technique. Further studies in the future should be taken in consideration to confirm the success rate of pterygoid implants since there is only one prospective RCT, potentially incorporating modern technologies such as guided surgery or navigated surgery could be a solution for the success of pterygoid implants, minimizing the risk and less dependent on the operator.

Avoiding Sinus Floor Elevation by Placing a Palatally Angled Implant: A Morphological Study Using Cross-Sectional Analysis Determined by CBCT.

BACKGROUNDS: Tooth loss in the posterior maxilla often necessitates dental implant placement, but the maxillary sinus anatomy poses challenges, especially during sinus floor elevation. Mesially angled implants are an alternative for total edentulism, but for single tooth deficiencies, palatally angled implants may offer a solution. This study evaluates the prevalence of avoiding sinus floor elevation by placing palatally angled implants in cases with a single missing tooth. METHODS: A retrospective study at Ahmet Kelesoglu Faculty of Dentistry involved 100 participants with a single missing tooth and prior CBCT scans. Virtual implants were placed using OnDemand3D (version 1.0.7462) software. On CBCT sections, implants were angled palatally to avoid sinus or nasal cavity perforation. Statistical analysis was conducted using R and MedCalc (version 4.3.2) software. RESULTS: Of the participants (60% female, average age 50.45), 76 edentulous regions required sinus elevation. The implant placeability rates varied across zones (second molar: 39.3%, first molar: 63.1%, second premolar: 78.5%). Implant placement at a palatal angle was significantly higher in the second premolar and first molar regions. Statistically significant differences were observed in the implant placeability between regions. CONCLUSIONS: This study supports the feasibility of avoiding sinus floor elevation through palatally angled implants in specific cases, reducing the associated complications.

The comparison of visibility of the maxillary sinus septa between cone-beam computed tomography scans and panoramic radiograph images as dependent on the cortical bone thickness: a retrospective comparative study.

PURPOSE: To analyze the visibility of the maxillary sinus septa (MSS) in panoramic radiography (PR) versus cone beam computed tomography (CBCT) and to investigate whether the buccal cortical bone thickness (BT) or the septa dimensions influence their visibility. METHODS: Corresponding PR and CBCT images of 355 patients were selected and examined for MSS visibility. The septa dimensions (width, height, depth) and the BT were measured. Results were analysed statistically. RESULTS: Comparing the corresponding regions on CBCT and PR, 170 MSS were identified; however, only 106 of these were also visible using PR. The MSS visibility was significantly higher on CBCT versus PR images (P1: p = 0.039, P2: p = 0.015, M1: p = 0.041, M2: p = 0.017, M3: p = 0.000), except region C (p = 0.625). Regarding the measurements of MSS dimensions, only the height in region M1 (p = 0.013) and the width in region P2 (p = 0.034) were significantly more visible on CBCT. The BT in the area of the MSS was found to have a marginal influence on its visibility on the PR images only in regions M3 and M1 (M3: p = 0.043, M1: p = 0.047). In terms of MSS visibility based on the dimensions, significance was found for all three influencing variables only in region P2 (width; p = 0.041, height; p = 0.001, depth; p = 0.007). There were only isolated cases of further significance: M3 for width (p = 0.043), M2 for height (p = 0.024), and P1 for depth (p = 0.034), no further significance was noted. CONCLUSION: MSS visibility appears significantly higher on CBCT versus PR images. It is concluded that the septa dimensions and BT can influence MSS visibility on PR images just in certain regions.

Autologous leucocyte and platelet rich in fibrin (L-PRF) - is it a competitive solution for bone augmentation in maxillary sinus lift? A 6-month radiological comparison between xenografts and L-PRF.

Maxillary lateral sinus floor elevation, or external sinus lift, is a widespread surgical intervention in the dental field. Insertion of implants in the posterior region of the maxilla often requires reconstruction of the remaining native bone that has insufficient volume. Background and aims: Much of the research published involves using artificial products, like xenografts and resorbable collagen membranes, after a prior Cone Beam Computer Tomography (CBCT) investigation. Nowadays, more accessible access, less financial costs, a biological approach, and faster healing are objectives that surround this procedure. Leucocytes and platelets rich in Fibrin (L-PRF) are a natural component with a high concentration of growth factors. Due to its regenerative properties and lack of complications, it is used in several medical fields, like orthopedics, dermatology, and oral surgery. This retrospective study aims to compare results in bone height and volume obtained through external sinus lift, either by using xenografts or autologous plasma rich in fibrin, by evaluating the quantity of new bone formation from a radiological point of view. Methods: Fifty-eight Caucasian patients were included in this retrospective study; 48 were submitted to xenograft procedure, and 10 were selected for L-PRF grafting material with simultaneous implant placement. Lack of clinical and histological studies performed on patients with L-PRF surgeries limited us in choosing a larger group for the radiological analysis. CBCT evaluation was performed before surgery and 6 months after. All patients selected for the study presented good general and oral health, acute oral and sinus infections excluded; smoking and periodontal disease were also criteria of exclusion. Two operators performed the measurements in pre-established landmarks in different time frames. The two independent groups were compared with the Wilcoxon rank-sum test for quantitative data. Qualitative characteristics were described as counts and percentages. All analyses were performed in an R environment for statistical computing and graphics. Results: Mean bone height gain in the xenograft group in the regions was as follows: 7.44 for the anterior landmark, 12.14 for the median and 8.28 for the distal. The mean group height gained for the L-PRF group was 0.1 anteriorly, -0.18 for the median measurement, and 0.23 distally. We obtained excellent overall reliability for all the height measurements between the two operators. Conclusions: Further studies must be conducted to establish new sets of surgical protocols in case L-PRF alone is found to be a reliable, stable, biological alternative to the well-documented xenografts in external sinus lifts. Radiological results, although promising, must be further applied in long term clinical survival of the implants in the grafted sites. Also, studies combining L-PRF in conjunction with xenograft might bring improved clinical results in terms of reduced postoperative complications and accelerated healing.

Bone block from lateral window - correcting vertical and horizontal bone deficiency in maxilla posterior site: A case report.

BACKGROUND: Lateral window approach for sinus floor lift is commonly used for vertical bone augmentation in cases when the residual bone height is less than 5 mm. However, managing cases becomes more challenging when a maxillary sinus pseudocyst is present or when there is insufficient bone width. In this case, we utilized the bone window prepared during the lateral window sinus lift as a shell for horizontal bone augmentation. This allowed for simultaneous horizontal and vertical bone augmentation immediately after the removal of the maxillary sinus pseudocyst. CASE SUMMARY: A 28-year-old female presented to our clinic with the chief complaint of missing upper left posterior teeth. Intraoral examination showed a horizontal deficiency of the alveolar ridge contour. The height of the alveolar bone was approximately 3.6 mm on cone beam computed tomography (CBCT). And a typical well-defined 'dome-shaped' lesion in maxillary sinus was observed on CBCT imaging. The lateral bony window was prepared using a piezo-ultrasonic device, then the bony window was fixed to the buccal side of the 26 alveolar ridge using a titanium screw with a length of 10 mm and a diameter of 1.5 mm. The space between the bony window and the alveolar ridge was filled with Bio-Oss, covered with a Bio-Gide collagen membrane, and subsequently sutured. Nine months later, the patient's bone width increased from 4.8 to 10.5 mm, and the bone height increased from 3.6 to 15.6 mm. Subsequently, a Straumann® 4.1 mm × 10 mm implant was placed. The final all-ceramic crown restoration was completed four months later, and both clinical and radiographic examinations showed that the implant was successful, and the patient was satisfied with the results. CONCLUSION: The bone block harvested from the lateral window sinus lift can be used for simultaneous horizontal bone augmentation acting as a shell for good two-dimensional bone augmentation.

Manejo quirúrgico del paciente con patología pseudoquística sinusal: a propósito de un caso / Surgical management of the patient with sinusal pseudocyst pathology: a case report

Introducción: la patología sinusal puede comprometer el éxito del tratamiento de implantes. Existe una elevada incidencia de patología sinusal. El tratamiento de esta patología puede implicar a otros profesionales, lo que supone un mayor coste sanitarios y demora en la realización de los tratamientos de implantes. El objetivo del presente artículo es presentar un caso clínico representativo de la patología pseudoquística del seno maxilar y una alternativa de su manejo quirúrgico simultáneo a la regeneración ósea requerida para su posterior rehabilitación mediante implantes, así como actualizar la evidencia científica disponible. Caso clínico: se presenta una paciente de 46 años con una lesión pseudoquística sinusal que es remitida para rehabilitar mediante implantes en 1.4 y 1.7, por movilidad y dolor en relación a prótesis fija dentosoportada en maxilar derecho. Se realiza el tratamiento quirúrgico de exodoncias, elevación de seno maxilar y eliminación de la lesión pseudoquística de manera simultánea. Discusión: existe controversia sobre el momento idóneo para realizar el tratamiento sinusal. Algunos estudios muestran éxito de la cirugía endoscópica simultáneamente a la eliminación de la fuente odontogénica. Otros han demostrado que realizar primero la cirugía sinusal tiene el mismo porcentaje de curación que realizar primero el tratamiento odontológico. Conclusión: el diagnóstico de la patología y la planificación quirúrgica deben tener en cuenta el tipo de patología, la extensión y las necesidades de tratamiento del paciente. El manejo quirúrgico de la patología sinusal de manera simultánea a la regeneración ósea es una alternativa segura y beneficiosa para el paciente. (AU)

Introduction: Sinus pathology can compromise the success of implant treatment. There is a high incidence of sinus pathology. The treatment of this pathology may involve other professionals, which means higher healthcare costs and delays in carrying out implant treatments. Besides updating available scientific evidence, the objective of this article is to present a representative clinical case of pseudocystic pathology of the maxillary sinus and an alternative to its simultaneous surgical management in the bone regeneration required for subsequent rehabilitation using implants. Clinical case: A 46-year-old patient with a pseudocystic sinus lesion, referred for rehabilitation using implants in 1.4 and 1.7, due to mobility and pain in relation to a tooth-supported fixed prosthesis in the right maxilla. The surgical treatment, consisting of extractions, maxillary sinus elevation and removal of the pseudocystic lesion, was performed simultaneously. Discussion: There is controversy about the ideal time to perform sinus treatment. Some studies show success of endoscopic surgery simultaneously with removal of the odontogenic source. Others have shown that performing sinus surgery first has the same cure rate as performing dental treatment first. Conclusion: Pathology diagnosis and surgical planning must take into account the type and extent of the pathology and the treatment needs of the patient. Surgical management of sinus pathology simultaneously with bone regeneration is a safe and beneficial alternative for the patient. (AU)

Dynamic Navigation Protocol for Direct Sinus Lift and Simultaneous Implant Placement: A Case Report.

AIM: This study aims to evaluate the accuracy associated with the use of a dynamic navigation system for the lateral window opening for a direct sinus floor elevation (SFE) procedure with simultaneous implant placement. MATERIALS AND METHODS: A female patient, aged 27 years, reported to the Department of Implantology seeking treatment for her lost tooth. On radiographic examination, the residual alveolar ridge height was 6 mm in the 26 (left upper first molar) region. For the implant placement, the case was planned to be carried out under dynamic navigation (Navident, Claronav, Canada). To make the lateral window accessible to the sinus floor, an implant trajectory resembling the required window dimensions and prosthetic implant position was planned. Post-surgery cone beam computed tomography (CBCT) was taken to assess the accuracy of the lateral window and implant trajectories using Evalunav (Navident, Claronav, Canada) analysis with dynamic navigation software. RESULTS: There was improved accuracy of the lateral window opening, and the visualization of the lateral window was maintained in real-time throughout the procedure, which was advantageous to eliminate the tearing of the thin sinus membrane. The deviations found in the trajectory of the lateral window in comparison between the planning and post-procedure were: (a) entry was deviated by 2.83 mm; (b) the apex was deviated by 2.52 mm; (c) vertically, the apex was deviated by 0.29 mm; and (d) there was an 8.93° deviation in the angulation of the trajectory. The implant that was placed simultaneously with the SFE's accuracy was in comparison with the position that was planned: (a) entry was deviated by 0.03 mm, (b) the apex was deviated by 0.82 mm, (c) vertically, the apex was deviated by 0.82 mm, and (d) there was a 0° deviation in the angulation of the trajectory. CONCLUSION: Dynamic navigation technology can help overcome complications associated with direct sinus lift procedures by providing highly accurate and precise planning and execution of the surgical procedure. This can lead to improved implant stability and a reduced risk of complications.

A Novel Dental Implant Approach for Crestal Sinus Elevation: A Case Series Study.

The aim of this study was to evaluate the radiographic and clinical outcomes of patients undergoing sinus membrane elevation via a minimally invasive crestal approach utilizing the dental implant. Twenty patients having 1 or more missing posterior teeth were included. The maxillary sinus membrane was elevated using dental implant via a crestal approach in areas with insufficient residual bone. CBCT scans were used to measure the amount of newly formed bone, implant length inside the sinus, bucco-palatal sinus width, and bone thickness. Surgical and postsurgical complications along with implant survival were also measured. The mean (±SD) values for the newly formed bone after 1 year were 2.4 (±1.87) mm, while values for implant length inside the sinus were 4 (±1.49) mm. The results showed that percentage of implant length inside the sinus and the palatal bone thickness were statistically significant positive predictors of the newly formed bone. Higher percentage of implant length inside the sinus and increased palatal bone thickness were associated with larger amounts of newly formed bone. A high patient satisfaction was reported along with a 100% implant survival. The utilization of the novel dental implant approach for crestal sinus elevation demonstrated predictable clinical and radiographic outcomes. This novel technique is simple to both patients and clinicians, rendering it a promising and cost-efficient procedure.

The Use of Allograft Bone in the Lateral Approach of Sinus Floor Elevation: A Systematic Review of Clinical Studies.

Background and Objectives: The aim of this systematic review was to assess the efficiency of using allografts for sinus lift. Materials and Methods: This systematic review was written under the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines and recommendation of the Cochrane Handbook for Systematic Reviews of Interventions. Three electronic databases were screened until October 2023. The risk of bias was assessed according to the Strengthening the Reporting of Observational studies in Epidemiology (STROBE) guidelines. Statistical analysis was performed for median bone volume and implant survival rate. Results: From 321 articles retrieved, 7 articles were included in this review. A comparison between freeze-dried bone allograft (FDBA) and deproteinized bovine bone (DBB) for mean bone volume indicated a weighted mean difference (WMD) of -0.17 [-0.69, 0.36] (95% confidence interval (CI)), p = 0.53. For implant survival rate, a comparison was made between FDBA and autogenous bone indicating a risk ratio (RR) of 1.00 [0.96, 1.05] (95% CI), p = 1.00. Conclusions: The available evidence suggested that allograft bone can be used in sinus lift procedures. The results obtained are insufficient to compare with other types of bone graft, requiring a longer follow-up time. Future clinical trials are needed in order to evaluate the advantages of using allograft bone.

Assessment of Benign Paroxysmal Positional Vertigo (BPPV) Incidence Following Closed Sinus Lift and Ridge Splitting Surgeries: A Cohort Study.

Background: With a notable increase in demand for implant placement in atrophic cases, this study aimed to evaluate the occurrence of benign paroxysmal positional vertigo (BPPV) following closed sinus lift and ridge splitting surgeries. Materials and Methods: Healthy patients requiring posterior maxillary closed sinus lift or ridge split surgeries at Mashhad Dental School from September 2021 to September 2022 were enrolled in this cohort study. A single surgeon performed all surgeries under standard protocols. The intervention groups consisted of closed sinus lift and ridge splitting procedures. The primary outcome variable was BPPV, and the Dix-Hallpike maneuver was used before and after the operation to diagnose BPPV. The data were statistically analyzed using SPSS 23, and the significance level was set at 0.05. Results: A total of 112 patients (51 women and 61 men) with a mean age of 48.4 ± 9.5 years participated in the study. The average BMI was 21.5 ± 2.4, and the mean duration of surgery was 31.9 ± 6.6 min. Of the patients, 10.7, 36.6, 27.7, 12.5, and 1.8% presented with hypertension, headache, dizziness, nausea, and BPPV, respectively. Two patients (3.1%) in the closed sinus lift group were diagnosed with BPPV, whereas no patients in the ridge split group were diagnosed. However, there was no significant difference (P = 0.509). No statistically significant difference in the occurrence of certain symptoms between two groups was found. There was a significant association between certain health conditions and the onset of BPPV. Conclusion: The study suggests closed sinus lift surgery may have a higher risk of BPPV than ridge split surgery, but further studies with larger sample are needed to confirm this association.

APCs in sinus floor augmentation.

After tooth loss in the posterior area of the maxilla, sinus floor elevation is often required to compensate the vertical bone loss due to sinus pneumatization. This narrative review reports on the potential benefits of autologous platelet concentrates (APCs) during this procedure. As for transcrestal approach, APCs have been used as "sole" substitute/graft. However, because of the low number of clinical trials available with PRGF, and even none for PRP, no definitive conclusions can be made regarding their efficacy. The number of studies on the use of L-PRF were outnumbered indicating good feasibility for vertical bone gain, with a high implant survival rate and a low degree of complications. PRP and PRGF have not been studied as a "single/sole" substitute for a one-stage lateral window approach, probably because of the weak physical characteristics of the membranes. L-PRF alone appears to be a predictable grafting material for lateral maxillary sinus grafting and a reduced RBH should not be considered as a risk factor. Compared to a "standard" bone substitute L-PRF shows slightly less vertical bone gain (consider enough membrane application and use of bony window as new sinus floor roof over the implant apices), enhanced early resorption (first 6 months after application), but a similar stable bone gain afterward. For a two-stage lateral window approach, APCs "alone" cannot be recommended, due to their weak withstand to the sinus pneumatization forces. APCs combined with bone substitutes seem to accelerate bone formation, without any additional benefits on the long-term new bone gain. The use of L-PRF membranes for the treatment of perforations appears to be an effective treatment option, but further clinical studies are needed to confirm this. Even though the abovementioned statements are based on large numbers of studies, additional RCTs comparing APCs with different types of grafting procedures for sinus elevation are needed.

[Elimination of defects in the Schneiderian membrane during sinus lift operations]. / Ustranenie defektov membrany Shneidera vo vremya provedeniya operatsii sinus-liftinga.

PURPOSE: Evaluation of the effectiveness of a new method of plasty of an extensive defect in the mucous membrane of the Schneiderian membrane, which occurs during the sinus lift operation, using an artificial collagen membrane and a developed method for fixing it. MATERIAL AND METHODS: A total of 188 patients took part in the study, all of these patients underwent an open sinus lift operation with simultaneous or delayed implantation. Operations were performed under balanced anesthesia. Six months after the operation, according to computed tomography, the height of the formed bone regenerate was estimated. In the area of each missing tooth, the initial bone height and the resulting bone grafting were assessed. Then we compared the average values before and after the operation, the average height difference before and after the operation. RESULTS: In 19 patients during the sinus lift there was an accidental extensive rupture of the mucous membrane of the maxillary sinus. Elimination of the mucosal defect was carried out according to our patented method. All 188 patients were diagnosed with partial loss of teeth with bone tissue deficiency in the distal maxillary sinus. The height of the alveolar process in the projection of missing teeth ranged from 0.5 mm to 5 mm. Delayed dental implantation was performed when the height of the alveolar bone was less than 3 mm, direct when the presence of 3-5 mm. After 6 months, dental implants were installed in the reconstruction zone, after another 6 months - rational prosthetics. CONCLUSIONS: The proposed method of plastic surgery has the following advantages. Firstly, it allows to eliminate the defect of the mucous membrane together with an increase in the height of the alveolar ridge. Secondly, after this method, the integrity of the mucous membrane will be restored. Thirdly, with an alveolar bone height of 3 mm or more, dental implants should also be installed.

Simultaneous sinus elevation and immediate implant placement without biomaterial: A technical note.

Sinus floor elevation is widely considered as one of the most reliable and predictable procedures for augmenting posterior maxillary bone volume before implant placement. The lateral window technique is often described as the gold standard, especially when dealing with limited residual bone height. Traditionally, severe vertical defects in the posterior maxilla required a two-stage approach: first elevating the sinus membrane with biomaterial, followed by a second surgery for implant placement. This article introduces an innovative approach to the lateral sinus lift procedure, enabling simultaneous implant placement in sites with less than 5 mm of remaining bone height. This original one-stage surgical approach is interesting because it does not involve grafting of any biomaterial into the sinus. Its main objectives are to enhance safety and predictability while reducing the risk of post-operative infections. However, it's essential to emphasize that achieving an ideal implant position with adequate primary stability is crucial for its viability.

Alveolar antral artery: cone beam computed tomography study and clinical context.

Purpose: Anastomosis between posterior superior alveolar artery and infraorbital artery can go through bony canal in the lateral wall of the maxilla. This artery is called alveolar antral artery. It can complicate lateral sinus lift procedure by bleeding and hemosinus formation or bone graft wash out. The artery can also go in soft tissues where is not visible on cone beam computed tomography. In previous studies, the relation of this artery to sinus floor or alveolar process was measured. These structures are highly unstable during lifetime and after tooth loss. The aim of this study is to study presence and relations of bony canal in the lateral maxillary wall, to characterize the group of patients which is more likely to have bone canal in the lateral maxilla. The aim and the novelty of this study is the describing of the relationship of the bony canal to the more stable structure of hard palate and describing the relation of presence of bony canal on width of maxillary sinus, and to facilitate the prediction of presence of the alveolar antral artery. Materials: The cone beam computed tomography scans of the patients (251 in number) of the university hospital were examined for presence of alveolar antral artery (148 was fulfilled inclusion criteria), patient were characterized by gender, age, and sinus type (wide, average, narrow). The diameter of the bony canal and its relation to the level of sinus floor and hard palate were measured. Results: The cone beam computed tomography scans of 148 patients, out of it 55 man (37,2%) and 93 women (62,8%). Bony canal containing alveolar anastomosis was found in 69 cases (57,0%). Presence of the bony canal in the lateral wall of maxillae showed statistical probability depending on age with p = 0, 064 according to Mann-Whitney test. The older patients have more likely the bony canal. The presence of the alveolar antral artery was found more likely in the wide sinuses. The hard palate level can serve as a prediction point of alveolar antral artery only in first molar and second premolar region. In accordance with previous studies the width of bony canal is significantly higher in group of man (p = 0, 015). There was found a correlation between smaller distance of bony canal from sinus floor in the presence of teeth (p = 0, 067). After tooth loss the distance between sinus floor and bony canal increases, but the distance of bony canal to hard palate level stays constant. This can be explained hypothetically so that periodontal ligaments and root surface acts as a barrier for sinus pneumatization. Conclusion: Lateral sinus lifting in some cases can be unenviable, the knowledge about alveolar antral artery anatomy can reduce the risk of arterial bleeding. The cone-beam computed tomography is a routine examination prior to augmentation surgery and therefore the data obtained from it has an impact on clinical practice.

Resorbable magnesium metal membrane for sinus lift procedures: a case series.

BACKGROUND: The purpose of this case series was to demonstrate the use of a magnesium membrane for repairing the perforated membrane in both direct and indirect approaches, as well as its application in instances where there has been a tear of the Schneiderian membrane. CASE PRESENTATION: The case series included four individual cases, each demonstrating the application of a magnesium membrane followed by bone augmentation using a mixture of xenograft and allograft material in the sinus cavity. In the first three cases, rupture of Schneiderian membrane occurred as a result of tooth extraction, positioning of the dental implant, or as a complication during the procedure. In the fourth case, Schneiderian membrane was perforated as a result of the need to aspirate a polyp in the maxillary sinus. In case one, 10 mm of newly formed bone is visible four months after graft placement. Other cases showed between 15 and 20 mm of newly formed alveolar bone. No residual magnesium membrane was seen on clinical inspection. The vertical and horizontal augmentations proved stable and the dental implants were placed in the previously grafted sites. CONCLUSION: Within the limitations of this case series, postoperative clinical examination, and panoramic and CBCT images demonstrated that resorbable magnesium membrane is a viable material for sinus lift and Schneiderian membrane repair. The case series showed successful healing and formation of new alveolar bone with separation of the oral cavity and maxillary sinus in four patients.

Radiological Study on the Evolution of the Biomaterial's Image (Shape, Density, Vertical Dimensions) after the Lateral Sinus Lift.

The aim of this study is to evaluate the long-term changes of sinus lift material. Materials and methods: We included a total number of 35 patients (20 men and 15 women), between 32 and 80 years old, evaluated on a timeframe of up to 11.6 years. Diverse biomaterials were used (allograft, xenograft, alloplastic, combinations of them), with autologous bone in some cases. Results: The appearance of the top plane of the bone over time took a large dome shape (36% of cases), a linear shape (32% of cases), an irregular shape (23% of cases), or had micro domes above the implants (7%). No significant differences were found between the groups regarding age. The radiological density of the biomaterial tended to equalize that of the native bone. The final vertical dimensions seemed to be independent of the initial native bone height but seemed to be correlated with the amount of applied biomaterial. For the study group, the biomaterial contracted on average by 10% for the maximum height (H max) and 20% for the minimum height (H min), which can explain the tendency of the upper border of the biomaterial to curve. The annual H max contraction ranged from -0.09 to +0.18 with a mean value of 2.67% (SD = 0.04, CI: [0.011, 0.041]). The median value was 1.8%. The annual H min contraction ranged from -0.24 to +0.24, with a mean value of 4.33% (SD = 0.07, CI: [0.021, 0.065]). The median value was 3.59%. There were no statistically significant gender differences (Mann-Whitney U, p = 0.483, p = 0.642). The additional application of biomaterial together with the implants seemed to have a beneficial effect on the final vertical dimension of the bio-transformed material.

Cone Beam Computed Tomography Analysis of Posterior-Superior Alveolar Canal from a Fixed Reference Point: Implications for Sinus Floor Elevation Procedure through Lateral Approach.

Objective: Sinus floor elevation is commonly done in the maxillary posterior region prior to dental implant placement. This study primarily aimed at assessing the location of the posterior superior alveolar artery (PSAA) canal on cone beam computed tomography (CBCT) scans and its relation to the alveolar ridge and maxillary sinus from a fixed reference point. Material and Methods: A total of 226 edentulous maxillary molar sites were included in this retrospective analysis. The distance from the PSAA to the sinus floor (SF), alveolar crest (AC) and a fixed reference point, that is, the roof of sinus (RS) were measured. The alveolar bone height (ABH), thickness of the crestal keratinized mucosa (CKM) and thickness of Schneiderian membrane (SM) were also evaluated. Results: 54 sites (23.89%) were excluded from the study. The SF, AC, RS and ABH values averaged at 11.91 mm ± 3.63 mm, 16.05 mm ± 3.96 mm, 25.32 mm ± 7.13 mm and 4.93 mm ± 4.27 mm respectively. SF and AC was higher in second molar than first molar region (p < 0.001), but RS did not show significant difference (p = 0.85). CKM and SM averaged at 2.02 mm ± 0.68 mm and 1.31 mm ± 0.81 mm respectively. Conclusion: The PSAA can be visualized in CBCT scans with a prevalence of 76.11% and may not be detected when adherent to the sinus membrane. This study stresses on the need for a CBCT, prior to sinus surgeries through lateral approach, to assess the PSAA.