Adaptation of soft tissue following bilateral sagittal split ramus osteotomy in skeletal class III patients with facial asymmetry: A retrospective study.

PURPOSE: This retrospective study aimed to evaluate sequential changes in soft tissue thickness after bilateral sagittal split ramus osteotomy (BSSRO) in skeletal class III patients with facial asymmetry and to explore their correlation with surgical movements for optimal postoperative facial symmetry and esthetic outcomes. MATERIAL AND METHODS: This study included 37 patients with class III malocclusion and > 4 mm Menton (Me) deviation who underwent BSSRO. Posteroanterior cephalograms were captured at preoperative (T0), 6 weeks (T1), 6 months (T2), and 1 year (T3) postoperative intervals to analyze changes in Me deviation, fronto-ramal inclination (FRI), and soft tissue thickness. Statistical analysis was conducted to assess the changes in soft tissue thickness over time and the effects of surgical correction. RESULTS: Significant improvements in facial asymmetry were noted after surgery, with reductions in Me deviation and FRI on both the deviated side (DS) and non-deviated side (NDS). An increase in soft tissue thickness was observed on both the DS and NDS after surgery, with the NDS showing a continued increase between 6 months and 1 year, indicating an ongoing compensation for symmetry restoration. The study also identified a positive correlation between the surgical movement of the FRI and the increase in soft tissue width on the NDS after 6 months. CONCLUSION: This study established that soft tissue thickness continues to adapt and change up to 1 year after BSSRO, underscoring the need for a long-term evaluative approach in orthognathic surgery for patients with facial asymmetry.

"The impact of orthognathic surgery on articulation proficiency and speech intelligibility in skeletal Class III malocclusion: 18 months follow up".

Introduction: Orthognathic surgery results in the positional change of the maxilla and mandible that may affect speech. The present study evaluated the effect of combined maxillary advancement and mandibular setback surgery on articulation proficiency and speech intelligibility in patients with non-syndromic skeletal Class III malocclusion. Methods: In this prospective study, twenty-five patients with skeletal class III malocclusion and consecutively treated with Lefort-1 maxillary advancement and mandibular setback (BSSO) orthognathic surgery were included in this study. The speech sample was recorded with a digital audio tape recorder one day before surgery and at 3, 6, 9, 12 and 18 months after surgery. Three qualified and experienced speech and language pathologists evaluated articulation errors and intelligibility of speech samples. Repeated One-way analysis of variance was used to compare articulation proficiency and speech intelligibility at different time intervals. Results: The substitution, omission, distortion and addition errors showed no significant changes at 3 months and 6 months. The total articulation errors decreased to zero at 9 months and no significant increase was observed till 18 months (P < 0.05). Speech intelligibility showed statistically non-significant improvement at any time interval. Cephalometric skeletal parameters SNA and N l A°. were significantly correlated with addition and total articulation errors at 18 months follow up. Conclusions: The ortho-surgical treatment improves speech (decreases. articulation errors) in most of the patients usually 6-9 months post-surgery. Speech intelligibility is not affected by bimaxillary orthognathic surgery in skeletal class III patients. The articulation errors were correlated to changes in position of maxilla.

Is Incisor Compensation Related to Skeletal Discrepancies in Skeletal Class III? A Retrospective Cephalometric Study.

This study investigated compensation in skeletal Class III subjects to compare various severities of abnormal jaws. A retrospective analysis of 137 skeletal Class III cephalograms (63 males and 74 females) was conducted, with cephalometric assessments determining skeletal and dental values. The results were compared with Class I cephalograms. Incisor compensation was examined by pairing normal jaws with varied abnormal jaws, classified by severity using one standard deviation (SD). Statistical analyses included Kruskal-Wallis tests, Bonferroni tests, Spearman's correlations, and multiple linear regression. Four skeletal Class III groups were identified: OMx+PMd, RMx+OMd, OMx+OMd, and PMx+PMd (P = prognathic; O = orthognathic; R = retrognathic; Mx = maxilla; Md = mandible.). The upper central incisor (U1) showed proclination, and the lower central incisor (L1) showed retroclination across all groups except for U1 in PMx+PMd and L1 in OMx+OMd, which exhibited normal inclination. U1 exhibited limited compensation even with progressive maxillary retrognathism, while L1 showed limited compensation after one SD of mandibular prognathism. Maxilla (SNA) and jaw discrepancy (ANB) were inversely related to the U1 degree, whereas only jaw discrepancy (ANB) was positively related to the L1 degree. U1 in PMx+PMd and L1 in OMx+OMd showed no incisor compensation. U1 had limited compensation even with progressive maxillary retrognathism while L1 showed limited compensation after one SD mandibular prognathism.

Effect of Different Mini Implant Assisted Rapid Palatal Expansion (MARPE) Designs on Maxillary Protraction in Skeletal Class III malocclusion: An FEM Study.

Background: Four different designs of mini-implant-assisted rapid palatal expansion (MARPE) and protraction in nasomaxillary complex and mid-palatal sutures in late adolescent skeletal Class III malocclusion were compared using a three-dimensional finite element analysis. Methods: A finite element model of skull and related sutures was constructed using the computed tomography scan of a 16-year-old female patient with skeletal Class III and ANB of -2°. Four appliance designs: Type I: MARPE with palatal force, Type II: MARPE with buccal force, Type III: Hybrid hyrax with palatal force, and Type IV: Hybrid hyrax with buccal force. Protraction vectors were and analyzed using Ansys software (ANSYS 2021 R2). The displacement pattern of the nasomaxillary structures and the stress distribution in the sutures were examined in all four appliance designs. Results: All the appliance designs resulted in a forward movement of the maxilla, while Type I and III, which used palatal protraction force, caused the greatest forward displacement. In Type I, II, and III, along with forward movement, a clockwise rotation of maxilla was observed, while in Type IV, an anticlockwise rotation of maxilla was observed. Type I, II, and III resulted in higher stress distribution around the superior structures, while Type IV resulted in less stress distribution around the superior structures of maxilla. Conclusion: The forward displacement was enhanced when palatal plates were used to protract the maxilla. The effective appliance design for skeletal class III with open bite case was Type I, II, and III and Type IV for deep bite cases.

The Use of Clear Aligners in Multi-Segmental Maxillary Surgery: A Case-Control Study in Cleft Lip and Palate and Skeletal Class III Patients.

Background: Maxillary hypoplasia and mandibular asymmetry may be corrected with orthognathic surgery after growth completion. For most stable results, some cases may require segmental Le Fort I osteotomies. Unfortunately, Invisalign's software (6.0 version) still has some inherent limitations in predicting outcomes for complex surgeries. This study explores the potential of aligners, particularly in multiple-piece maxillary osteotomies in both cleft and non-cleft patients. Method: Thirteen patients who underwent pre-surgical treatment with Invisalign were retrospectively matched in terms of diagnosis, surgical procedure, and orthodontic complexity with thirteen patients treated using fixed appliances. Virtual curves following the lower arch were employed to guide the correct pre-surgical positions of the upper teeth with a simple superimposition technique. The amount of impressions required in both groups to achieve satisfactory pre-surgical alignment of the segmented arches was compared. Results: one or no refinement phases were needed in the Invisalign group to reach an acceptable pre-surgical occlusion, while the amount of pre-surgical impressions needed to reach adequate coordination with fixed appliance treatment was slightly higher (p > 0.05). Conclusions: it appears that clear aligner could serve as an effective treatment for individuals necessitating segmental Le Fort I osteotomies when aided by the suggested simple superimposition approach.

Tongue pressure and maxillofacial muscle activities during swallowing in patients with mandibular prognathism.

BACKGROUND: Coordination among lip, cheek and tongue movements during swallowing in patients with mandibular prognathism remains unclear. OBJECTIVES: This study aimed to identify the temporal sequences of tongue pressure and maxillofacial muscle activities during swallowing in patients with mandibular prognathism and compared characteristics with those of healthy volunteers. METHODS: Seven patients with mandibular prognathism (mandibular prognathism group) and 25 healthy volunteers with individual normal occlusion (control group) were recruited. Tongue pressures and masseter, orbicularis oris, mentalis and supra- and infrahyoid muscle activities while swallowing gel were measured simultaneously using a sensor sheet system with five measurement points and surface electromyography, respectively. Onset time, offset time and durations of tongue pressure and muscle activities were analysed. RESULTS: In the mandibular prognathism group, tongue pressure was often produced first in more peripheral parts of the palate. Offset of tongue pressure in the posteromedian and peripheral parts of the palate and maxillofacial muscle activities except for orbicularis oris were delayed. Duration of tongue pressure in the anteromedian part of the palate was significantly shorter and durations of masseter, mentalis and suprahyoid muscle activities were significantly longer. Times to onset of orbicularis oris and suprahyoid muscle activities based on first onset of tongue pressure were significantly shorter. CONCLUSION: These results suggest that patients with mandibular prognathism may exhibit specific patterns of tongue pressure production and maxillofacial muscle activities during swallowing.

The Skeletal Stability of Combined Surgery First Approach and Clear Aligners in Skeletal Class III Malocclusion Correction: A Randomized Controlled Trial.

The surgery first approach (SFA) and clear aligners technique can address traditional treatment defects, such as prolonged waiting times for surgery and a less desirable facial appearance due to wire aligners. However, the curative effect of the combination remains uncertain. The randomized controlled study aimed to evaluate the skeletal stability of the SFA compared to the conventional orthodontic first approach (OFA), both of which were applied with clear aligners. A total of 74 participants were randomly allocated to two groups: the SFA group (experimental) and the OFA group (control). The skeletal deviation was calculated using reconstruction models from computed tomography scans taken immediately and 6 months after surgery. The largest median deviations were detected in the y-axis of the mandible for both two groups, separately 1.36 mm in the experimental group and 1.19 mm in the control group. Apart from the maxillary yaw dimension (p = 0.005), there were no significant differences between the two groups in terms of linear and angular deviation. The experimental group had an overall treatment time of 18.05 ± 2.53 months, while the control group took 22.83 ± 3.60 months (p < 0.05). Therefore, the combined surgery-first and clear aligners treatment can achieve comparable skeletal stability to the conventional approach, while also saving significant time.

Evaluation of the anterior dentoalveolar relationship in skeletal Class III malocclusion patients with different vertical facial patterns using cone-beam computed tomography.

OBJECTIVES: To measure and compare labiolingual inclinations of the teeth and alveolar bone and the anterior dentoalveolar inclination in patients with skeletal Class III malocclusions with different vertical facial patterns using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Based on the inclusion and exclusion criteria, 84 CBCT images of patients with untreated skeletal Class III malocclusion were selected. There were 28 patients each in the hypo-, normo-, and hyperdivergent groups. The labiolingual inclinations of the teeth, the corresponding alveolar bone, and the anterior dentoalveolar inclinations were measured and analyzed statistically. RESULTS: The inclinations of the mandibular canine and corresponding alveolar bone were smaller in the hypodivergent group than in the hyperdivergent group. The inclination of the alveolar bone and the maxillary dentoalveolar inclination were smaller in the hyperdivergent group than in the hypodivergent group. CONCLUSIONS: There were differences in the inclination of the teeth, corresponding alveolar bone, and dentoalveolar inclinations at different positions among skeletal Class III patients with different vertical facial patterns. The roots were generally located on the labial side of the alveolar bone.

Three-dimensional facial soft-tissue changes after surgical orthodontics in different vertical facial types of skeletal Class III malocclusion: A retrospective study.

The study compared the soft-tissue response to hard-tissue movement among different Class III vertical facial types after orthognathic surgery (OGS). The study included 90 consecutive adult patients with skeletal Class III malocclusion who underwent two-jaw OGS. Patients were divided into three groups (high, medium, and low angle) based on the presurgical Frankfort-mandibular plane angle. Cone-beam computerized tomographs were taken before surgery and after debonding. Soft- and hard-tissue linear and angular measurements were performed using three-dimensional reconstruction images. One-way analysis of variance was used for intergroup comparisons. Soft tissue tended to respond more to hard-tissue movement in the lower lip area in patients with low angle (mean = 0.089, SD = 0.047, p = 0.023), whereas no significant difference was observed for other sites. Consistently, L1/Li thickness increased most significantly in the high-angle group (mean = 1.98, SD = 2.14, p = 0.0001), and B/Si thickness decreased most significantly after surgery (mean = 2.16, SD = 2.68, p = 0.016). The findings suggest that the high-angle group had a higher chance of undergoing genioplasty to enhance chin contour. Different OGS plans should be considered for different Class III vertical facial types.

Application of bilateral condylectomy as an alternative surgical treatment for Class III malocclusion with posterior vertical excess, a technical note.

The Posterior vertical excess (PVE) associates a symmetric ramus and condyle elongation to an Angle Class III malocclusion. This dento-skeletal discrepancy can be isolated or associated to a condyle hyperplasia or a transverse overgrowth of the mandible due to macroglossia. We present the technique and the postoperative results of bilateral condylectomy applied for the surgical correction of PVE. Bilateral condylectomy represents an alternative to the bimaxillary surgery and adds to the therapeutic arsenal for the correction of Angle Class III malocclusion.

Maxillofacial growth changes after maxillary protraction therapy in children with class III malocclusion: a dual control group retrospective study.

PURPOSE: To investigate the balance between post-treatment effect and continued nature growth after maxillary protraction treatment in patients with skeletal class III malocclusion. METHODS: 31 patients aged 8.79 ± 1.65 years with skeletal Class III malocclusion had been treated with maxillary protraction and the treatment lasted an average of 1.16 years. The average observation duration after treatment in the maxillary protraction group was 2.05 ± 0.39 years. In the control groups, a sample of 22 patients (9.64 ± 2.53 years) with untreated skeletal class III malocclusion and 24 patients (9.28 ± 0.96 years) with skeletal class I malocclusion were matched to the treatment group according to age, sex and observation period. The mean observation interval of the control groups was 2.39 ± 1.29 years in the class III group and 1.97 ± 0.49 years in the class I group. RESULTS: The active orthopedic treatment effect showed a opposite trend to the natural craniomaxillofacial growth effect after treatment in many aspects. In the observation duration of treatment group, decrease in ANB, Wits appraisal and BAr-AAr were statistically significant compared to class I control group (p < 0.001), and there was a significant increase in NA-FH (P < 0.001) which was contrary to class III control group. Treatment group presented a significant increase in Gn-Co (P < 0.01) and Co-Go (P < 0.001), except for changes in the extent of the mandibular base (Pog-Go, P = 0.149) compared to class I control group. The vertical maxillomandibular skeletal variables (Gonial; MP-SN; MP-FH; Y-axis) in treatment group decreased significantly compared to those in class III control group (P < 0.01). U1-SN and L1-MP showed a significant increase, which was similar to the class I group (P > 0.05), and overjet decreased significantly relative to both of the two control groups (P < 0.05). CONCLUSION: Maxillary protraction therapy led to stable outcomes in approximately 77.42% of children with Class III malocclusion approximately 2 years after treatment. Unfavorable skeletal changes were mainly due to the greater protrusion of the mandible but maxillary protraction did have a certain degree of postimpact on the mandibular base. Protraction therapy does not fundamentally change the mode of maxillary growth in Class III subjects except for the advancement of the maxilla. Craniomaxillofacial region tend to restabilize after treatment and lead to skeletal growth rotation and more dentoalveolar compensation.

Evaluation of three-dimensional reconstructed palatal morphology in skeletal class III subjects with different vertical patterns using cone beam computed tomography.

BACKGROUND: This study aims to evaluate the difference of three-dimensional (3D) reconstructed palatal morphology between subjects with skeletal Class III and skeletal Class I in different vertical patterns using cone beam computed tomography (CBCT). METHODS: In this study, 89 subjects with skeletal Class III (49 females, 40 males; 25.45 ± 3.81 years) and 85 subjects with skeletal Class I (45 females, 40 males; 23.95 ± 4.45 years) were collected retrospectively and divided into hyperdivergent, normodivergent and hypodivergent groups. Dolphin software was used to reorient the CBCT images of these subjects. After segmenting 3D object of maxilla from the 3D skull by ProPlan software, Geomagic Studio was used to reconstruct 3D palatal morphology and establish an average 3D palatal morphology for each group. The differences of 3D palatal morphology between different groups were compared by deviation patterns on 3D colored map analysis. RESULTS: 3D colored map analysis showed the posterior part of male's palate was higher and wider than that of female's palate in skeletal Class III subjects. In skeletal Class III subjects, males with hyperdivergent pattern had a higher and narrower palate compared with hypodivergent subjects, while females with hyperdivergent had a higher but not obviously narrower palate compared with hypodivergent subjects. In the similar vertical patterns, skeletal Class III subjects had a flatter but not narrower palate compared with skeletal Class I subjects, along with a smaller palate volume. CONCLUSIONS: This method allows more intuitive between-group comparisons of the differences of 3D palatal morphology. In skeletal Class III subjects, as the vertical dimension increased, the palate tends to be higher and narrower. Therefore, the influence of vertical patterns on the palatal morphology should be fully considered in the orthodontic and orthognathic treatment of skeletal Class III subjects.

Skeletal Class III phenotype: Link between animal models and human genetics: A scoping review.

This study aimed to identify evidence from animal studies examining genetic variants underlying maxillomandibular discrepancies resulting in a skeletal Class III (SCIII) malocclusion phenotype. Following the Manual for Evidence Synthesis of the JBI and the PRISMA extension for scoping reviews, a participant, concept, context question was formulated and systematic searches were executed in the PubMed, Scopus, WOS, Scielo, Open Gray, and Mednar databases. Of the 779 identified studies, 13 met the selection criteria and were included in the data extraction. The SCIII malocclusion phenotype was described as mandibular prognathism in the Danio rerio, Dicentrarchus labrax, and Equus africanus asinus models; and as maxillary deficiency in the Felis silvestris catus, Canis familiaris, Salmo trutta, and Mus musculus models. The identified genetic variants highlight the significance of BMP and TGF-ß signaling. Their regulatory pathways and genetic interactions link them to cellular bone regulation events, particularly ossification regulation of postnatal cranial synchondroses. In conclusion, twenty genetic variants associated with the skeletal SCIII malocclusion phenotype were identified in animal models. Their interactions and regulatory pathways corroborate the role of these variants in bone growth, differentiation events, and ossification regulation of postnatal cranial synchondroses.

Does cleft lip and palate affect the severity of malocclusion?

OBJECTIVE: The purpose of this study was to evaluate the 3D anatomical features of unilateral (UCLP) and bilateral (BCLP) complete cleft lip and palate with those of skeletal Class III dentofacial deformities. MATERIALS AND METHODS: In total, 92 patients were divided into cleft and noncleft groups. The cleft group comprised 29 patients with UCLP and 17 patients with BCLP. The noncleft group comprised 46 patients with Class III dentofacial deformities. 3D anatomical landmarks were identified and the corresponding measurements were made on the cone-beam computed tomography (CBCT). RESULTS: The differences between the affected and unaffected sides of the patients with UCLP were nonsignificant. The differences between the patients with UCLP and BCLP were nonsignificant except for the SNA angle. Significant differences between the patients with clefts and Class III malocclusion were identified for the SNA, A-N perpendicular, and A-N Pog line, indicating that the maxillae of the patients in the cleft group were more retrognathic and micrognathic. Relative to the noncleft group patients, the cleft group patients had a significantly smaller ramus height. CONCLUSION: The affected and unaffected sides of the patients with UCLP did not exhibit significant differences. The maxillae of the patients with UCLP were significantly more retrognathic than those of the patients with BCLP. The maxillae and mandibles of the patients in the cleft group were more micrognathic and retropositioned relative to those of the noncleft Class III patients. CLINICAL RELEVANCE: The maxillary and mandibular findings indicated greater deficiencies in the patients with UCLP or BCLP than in those with skeletal Class III malocclusion. Appropriate surgical design should be administered.

Comparison of Different Decompensation Approaches on Facial Profile in Orthodontic-Orthognathic Treatment for Skeletal Class III Patients.

BACKGROUND: The objective of the present study was to assess the hard and soft tissue differences of skeletal Class III malocclusion patients treated with orthodontic-orthognathic surgery treatment between two decompensation approaches including extraction of maxillary premolars in preoperative orthodontics and clockwise rotation of the maxilla in orthognathic surgery. METHODS: 22 skeletal Class III patients with the crowding of maxillary dental arch less than 3mm were included in this study. These patients were divided into two groups: extraction group and non-extraction group. Lateral cephalograms taken before preoperative orthodontic treatment and after postoperative orthodontic treatment were used to analyze the differences of hard and soft tissues between two groups. Independent t test was used to evaluate the differences of variables between extraction group and non-extraction group. RESULTS: After treatment, there was significant difference of Wits between extraction group and non-extraction group (- 4.34 mm vs - 2.82 mm, respectively, P <0.05). Co-Gn was significantly greater in non-extraction group than in extraction group (77.18 mm vs 71.58 mm, P <0.05). U1-SN and L1-MP in extraction group were significantly closer to the normal values than non-extraction group (P <0.05). Regarding the change of variables before and after orthodontic-orthognathic treatment, NLA (7.25° vs 1.46°, P <0.01) and G-Sn-Pog' (8.06° vs 4.62°, P <0.05) were significantly greater in extraction group than in non-extraction group. CONCLUSION: For patients with skeletal Class III malocclusion, extraction of maxillary premolars in preoperative orthodontic treatment can more effectively eliminate the dental compensation and achieve a more harmonious facial profile compared to clockwise rotation of the maxilla in orthognathic surgery. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Improved super-elastic Ti-Ni alloy wire for treating adult skeletal class III with facial asymmetry: A case report.

BACKGROUND: Correcting severe skeletal class III malocclusion with facial asymmetry in adults through orthodontic treatment alone is difficult. CASE SUMMARY: In this case report, we describe orthodontic treatment and lower incisor extraction without orthognathic surgery for a 27-year-old man with a transverse discrepancy. The extraction sites were closed using an elastic chain. The use of intermaxillary elastics, improved super-elastic Ti-Ni alloy wire, and unilateral multibend edgewise arch wire was crucial for correcting facial asymmetry and the midline deviation. CONCLUSION: After treatment, the patient had a more symmetrical facial appearance, acceptable overjet and overbite, and midline coincidence. The treatment results remained stable 3 years after treatment. This case report demonstrates that a minimally invasive treatment can successfully correct severe skeletal class III malocclusion with facial asymmetry.

Effect of augmented corticotomy-assisted presurgical orthodontic treatment on alveolar bone fenestration and dehiscence in skeletal class III patients.

Background/purpose: Alveolar bone fenestration and dehiscence is common in untreated patients and potentially harmful. This study was to evaluate the effect of augmented corticotomy (AC) on the prevention and treatment of alveolar bone defects in skeletal class III high-angle patients during presurgical orthodontic treatment (POT). Materials and methods: Fifty patients with skeletal Class III high-angle malocclusion were enrolled, of whom 25 patients (G1) underwent traditional POT and 25 patients (G2) received AC during POT. The alveolar bone fenestration and dehiscence around the upper and lower anterior teeth were measured by CBCT. The incidence and transition of fenestration and dehiscence in the two groups were compared by the chisquare and Mann‒Whitney rank-sum tests. Results: Before treatment (T0), the incidence of fenestration and dehiscence around the anterior teeth of all patients was 39.24% and 24.10%, respectively. After POT (T1), the incidence of fenestration in G1 and G2 was 49.83% and 25.86%, respectively, and the incidence of dehiscence in G1 and G2 was 58.08% and 32.07%, respectively. For teeth without fenestration and dehiscence at T0, more anterior teeth in G1 exhibited fenestration and dehiscence at T1 than in G2. For teeth with fenestration and dehiscence at T0, most transitions in G1 were maintained or worsened, but "cure" cases were observed in G2. After POT, the cure rates of fenestration and dehiscence in G2 were 80.95% and 91.07%, respectively. Conclusion: During the POT of skeletal Class III high-angle patients, augmented corticotomy can significantly treat and prevent alveolar bone fenestration and dehiscence around anterior teeth.

A cross-sectional study on three-dimensional compensatory characteristics of maxillary teeth in patients with different types of skeletal Class III malocclusion with mandibular asymmetry.

OBJECTIVE: The purpose of this study was to analyze three-dimensional dental compensation in patients with different types of skeletal Class III malocclusion with mandibular asymmetry, using cone-beam computed tomography (CBCT) and three-dimensional reconstruction measurement technology, thereby providing clinical guidance and reference for combined orthodontic and orthognathic treatment. METHODS: 81 patients with skeletal Class III malocclusion with mandibular asymmetry were selected in accordance with the inclusion criteria. According to a new classification method based on the direction and amount of menton deviation relative to ramus deviation, patients were divided into three groups called Type 1, Type 2, and Type 3. In Type 1, the direction of menton deviation was consistent with that of ramus deviation and the amount of menton deviation was greater than that of ramus deviation. In Type 2, the direction of menton deviation was consistent with that of ramus deviation and the amount of menton deviation was smaller than that of ramus deviation. In Type 3, the direction of menton deviation was inconsistent with that of ramus deviation. The maxillary occlusal plane (OP), anterior occlusal plane (AOP), and posterior occlusal plane (POP) were measured on reconstructed CBCT images. The vertical, transverse, and anteroposterior distances from maxillary teeth to reference planes and the 3D angles between the long axis of these teeth and reference planes were measured. These dental variables measured from the deviated and non-deviated sides were compared within each group, as well as among each other. RESULTS: Of the 81 patients with asymmetrical Class III malocclusion, 52 patients were categorized in Type 1, 12 patients in Type 2, and 17 patients in Type 3. There were significant differences between deviated and non-deviated sides in Type 1 and Type 3 (p < 0.05). In Type 1, the vertical distances of maxillary teeth on the deviated side were lower than those on the non-deviated side, and AOP, OP, and POP on the deviated side were larger than those on the non-deviated side (p < 0.05). In Type 3, the vertical distances of the maxillary teeth on the deviated side were lower (p < 0.05), and the AOP and OP on the deviated side were larger than those on the non-deviated side. In all three groups, the transverse distances of the maxillary teeth from the mid-sagittal plane on the deviated side were larger than those on the non-deviated side (p < 0.05), and the angles between the long axis of maxillary teeth and the mid-sagittal plane on the deviated side were larger, respectively (p < 0.05). CONCLUSIONS: The maxillary teeth on the deviated side were observed to have smaller eruption heights in Type 1 and Type 3. In Type 1, AOP, POP, and OP were greater on the deviated side, while in Type 3, only AOP and OP were greater on the deviated side. The maxillary teeth of patients in all three groups on the deviated side were buccal and buccally inclined. Larger sample observations are still needed to further verify these findings.

Factors influencing the perception of profile beauty in Class III dental compensation: A comparative cross-sectional study according to three categories of assessors.

INTRODUCTION: The main objective of this study was to evaluate the different factors influencing the perception of female profile facial beauty in Class III patients with protruded mandible that can be treated with orthodontic dental compensation: (1)severity of the protrusion, (2) the upper incisors inclination and (3) the presence of jawlines. The secondary objective was to determine if the rater's gender and profession played a role in the assessment of the preferred profile. METHODS: A normal and smiling photographs of a female subject with normal facial and skeletal profile criteria were digitally manipulated to obtain 3 different mandibular sagittal positions: 0mm, +4mm and +8mm. Each position of the chin was evaluated with the presence or not of jawlines. In the smiling profiles, the same chin modifications were scored, and the maxillary incisor inclination was changed from 0 to +10 degrees with 5 degrees increments. A total of 320 raters (107 dentists, 103 orthodontists and 110 laypeople) scored the attractiveness of the different images using a Visual Analogue Scale. The limit of statistical significance was P<0.05. Generalized estimating equation (GEE) models were conducted to assess the predictors of variations in ratings within each set of photos, as well as the interactions of predictors where adjusted odds ratios (aOR) and their 95% confidence intervals were calculated and reported. RESULTS: In the profiles without a smile, image +4mm chin (Class III treated by compensation) and image +8-mm mandible (Class III not treated) were selected as the most and least attractive images, respectively, by almost all groups with no difference. The presence of jawlines has a positive role in facial attractiveness. In the smiling profiles, all the examiners showed a preference for image +4-mm chin and a slight protrusion of maxillary incisors (+5 degrees). No significant difference was found between genders in this study. CONCLUSIONS: Class III treated by compensation (+4mm) are more attractive than non-treated Class III (+8mm) by almost all groups with no difference. The presence of jawlines has a positive role in facial attractiveness. In the smiling profiles, all the examiners showed a preference for image +4-mm chin and a slight protrusion of maxillary incisors (+5 degrees). Orthodontists older than 50 years old are aware of the difficulty to treat a skeletal Class III and tend to accept it due to their long career experience. No significant difference was found between genders in this study.

Subregional pharyngeal changes after orthognathic surgery in skeletal Class III patients analyzed by convolutional neural networks-based segmentation.

OBJECTIVES: To evaluate the accuracy of fully automatic segmentation of pharyngeal volume of interests (VOIs) before and after orthognathic surgery in skeletal Class III patients using a convolutional neural network (CNN) model and to investigate the clinical applicability of artificial intelligence for quantitative evaluation of treatment changes in pharyngeal VOIs. METHODS: 310 cone-beam computed tomography (CBCT) images were divided into a training set (n = 150), validation set (n = 40), and test set (n = 120). The test datasets comprised matched pairs of pre- and post-treatment images of 60 skeletal Class III patients (mean age 23.1 ± 5.0 years; ANB<-2°) who underwent bimaxillary orthognathic surgery with orthodontic treatment. A 3D U-Net CNNs model was applied for fully automatic segmentation and measurement of subregional pharyngeal volumes of pre-treatment (T0) and post-treatment (T1) scans. The model's accuracy was compared to semi-automatic segmentation outcomes by humans using the dice similarity coefficient (DSC) and volume similarity (VS). The correlation between surgical skeletal changes and model accuracy was obtained. RESULTS: The proposed model achieved high performance of subregional pharyngeal segmentation on both T0 and T1 images, representing a significant T1-T0 difference of DSC only in the nasopharynx. Region-specific differences amongst pharyngeal VOIs, which were observed at T0, disappeared on the T1 images. The decreased DSC of nasopharyngeal segmentation after treatment was weakly correlated with the amount of maxillary advancement. There was no correlation between the mandibular setback amount and model accuracy. CONCLUSIONS: The proposed model offers fast and accurate subregional pharyngeal segmentation on both pre-treatment and post-treatment CBCT images in skeletal Class III patients. CLINICAL SIGNIFICANCE: We elucidated the clinical applicability of the CNNs model to quantitatively evaluate subregional pharyngeal changes after surgical-orthodontic treatment, which offers a basis for developing a fully integrated multiclass CNNs model to predict pharyngeal responses after dentoskeletal treatments.