Comparative Study for Propranolol Adsorption on the Biochars from Different Agricultural Solid Wastes.

Currently, large amounts of agricultural solid wastes have caused serious environmental problems. Agricultural solid waste is made into biochar by pyrolysis, which is an effective means of its disposal. As the prepared biochar has a good adsorption capacity, it is often used to treat pollutants in water, such as heavy metals and pharmaceuticals. PRO is an emerging contaminant in the environment today. However, there are limited studies on the interaction between biochars with PRO. Thus, in this study, we investigate the adsorption of PRO onto the biochars derived from three different feedstocks. The order of adsorption capacity was corn stalk biochar (CS, 10.97 mg/g) > apple wood biochar (AW, 10.09 mg/g) > rice husk biochar (RH, 8.78 mg/g). When 2 < pH < 9, the adsorption capacity of all the biochars increased as the pH increased, while the adsorption decreased when pH > 9, 10 and 10.33 for AW, CS and RH, respectively. The adsorption of PRO on biochars was reduced with increasing Na+ and Ca2+ concentrations from 0 to 200 mg·L-1. The effects of pH and coexisting ions illustrated that there exist electrostatic interaction and cation exchange in the process. In addition, when HA concentration was less than 20 mg/L, it promoted the adsorption of PRO on the biochars; however, when the concentration was more than 20 mg/L, its promoting effect was weakened and gradually changed into an inhibitory effect. The adsorption isotherm data of PRO by biochars were best fitted with the Freundlich model, indicating that the adsorption process is heterogeneous adsorption. The adsorption kinetics were fitted well with the pseudo-second-order model. All the results can provide new information into the adsorption behavior of PRO and the biochars in the aquatic environment and a theoretical basis for the large-scale application of biochar from agricultural solid wastes.

Towards Sustainable Solid Waste Management Systems: Empirical Evidence From Northern Malawi.

Solid waste management system in Mzuzu City is a growing concern due to its inefficiency and the resulting effect of accumulation of solid waste. In light of this environmental challenge, a study was conducted to assess the system's effectiveness. Through a mixed methods approach and random sampling, 400 respondents from 5 different areas of the city of Mzuzu were selected to provide comprehensive and unbiased responses. It was found that both the public and private sectors lack a complete commitment to sustainable waste management, citing reasons such as limited knowledge on recycling benefits, inadequate infrastructure and budgetary constraints. As a solution, the study proposes a government-led campaign to change attitudes towards waste production and promote recycling. Additionally, a Public-Private Partnership (PPP) should be utilised to develop policies and strategies that encourage private sector involvement in eco-friendly waste management. To further enhance recycling practices, support is needed in transitioning to circular economy waste management practices through regular education and training.

Combining anaerobic digestion slurry and different biochars to develop a biochar-based slow-release NPK fertilizer.

In this research, we developed a biochar-based fertilizer using biogas slurry and biochar derived from lignocellulosic agro-residues. Biogas slurry was obtained through the anaerobic digestion of the organic fraction of municipal solid waste (fresh vegetable biomass and/or prepared food), while biochars were derived from residues from quinoa, maize, rice, and sugarcane. The biochar-based fertilizers were prepared using an impregnation process, where the biogas slurry was mixed with each of the raw biochars. Subsequently, we characterized the N, P and K concentrations of the obtained biochar-based fertilizers. Additionally, we analyzed their surface properties using SEM/EDS and FTIR and conducted a slow-release test on these biochar-based fertilizers to assess their capability to gradually release nutrients. Lastly, a bioassay using cucumber plants was conducted to determine the N, P, and K bioavailability. Our findings revealed a significant correlation (r > 0.67) between the atomic O/C ratio, H/C ratio, cation exchange capacity, surface area, and the base cations concentration with N, P, and/or K adsorption on biochar. These properties, in turn, were linked to the capability of the biochar-based fertilizer to release nutrients in a controlled manner. The biochar-based fertilizer derived from corn residues showed <15 % release of N, P and K at 24 h. Utilization of these biochar-based fertilizers had a positive impact on the mineral nutrition of cucumber plants, resulting in an average increase of 61 % in N, 32 % in P, and 19 % in K concentrations. Our results underscore the potential of biochar-based fertilizers in controlled nutrient release and enhanced plant nutrition. Integration of biochar and biogas slurry offers a promising and sustainable approach for NPK recovery and fertilizer production in agriculture. This study presents an innovative and sustainable approach combining the use of biochar for NPK recovery from biogas slurry and its use as a biochar-based fertilizer in agriculture.

Role of silicate-rich and silicate-less industrial solid wastes in the physicomechanical properties and durability of low quality metakaolin-blended cement.

Although calcined clay-blended cement offers higher performance and durability compared to neat Portland cement (PC), its extensive use of natural clay leads to the depletion of natural non-renewable resources. To address this concern, this study focuses on the utilization of supplementary cementitious materials-based waste products as a substitute for PC. The blended cement was optimized with a low replacement level of 10 wt.% calcined Fanja clay (FNJ) as a low-grade metakaolin (MK) and 90 wt.% PC. Various types of industrial solid wastes (ISWs) were incorporated into the PC-FNJ blend in place of PC. The ISWs utilized included silicate-rich wastes, such as silica fume (SF) and glass waste (GW) powder, as well as silicate-less waste, such as marble dust (MD). The results revealed that incorporating 10 wt.% SF into the PC-FNJ mixture resulted in a considerable decrease in the flow rate while improving its early mechanical strength. GW, as another silicate waste, also enhanced early mechanical properties but not as much as SF. However, the composite of PC-FNJ-GW exhibited higher workability than the neat PC, PC-FNJ, and PC-FNJ-SF. The mixtures of PC-FNJ-MD demonstrated the same trend. Embedding SF into PC-FNJ-GW and PC-FNJ-MD substantially decreased both their flowability and mechanical properties. Nonetheless, all composites containing ISWs showed higher flexural strength, higher resistivity to chloride diffusivity, and higher or comparable acid and salt resistivity.

Meta-analysis addressing the potential of antibiotic resistance gene elimination through aerobic composting.

The significant increase in antibiotic resistance genes (ARGs) in organic solid wastes (OSWs) has emerged as a major threat to the food chain. Aerobic composting is a widely used technology for OSW management, with the potential to influence the fate of AGRs. However, the variability of the ARG elimination effects reported in different studies has highlighted the uncertainty regarding the effects of composting on ARGs. To identify the potential of composting in reducing ARG and the factors (e.g., composting technologies and physiochemical properties) influence ARG changes, a meta-analysis was conducted with a database including 4,232 observations. The abundances of ARGs and mobile genetic elements (MGEs) can be substantially reduced by 74.3% and 78.8%, respectively, via aerobic composting. During composting, the ARG levels in chicken and swine manure tended to be reduced more significantly (81.7% and 78.0%) compared to those in cattle manure (52.3%) and sewage sludge (32.6%). The reduction rate of sulfonamide resistant genes was only 35.3%, which was much lower than those of other types. MGEs and composting duration (CD) were identified as the most important factors driving ARG changes during composting. These findings provide a comprehensive insight into the effects of composting on ARG reduction, which may help prevent the transmission in food systems.

Unraveling the effect of phenolic extract derived from olive mill solid wastes on agro-physiological and biochemical traits of pomegranate and its associated rhizospheric soil properties.

Agricultural waste management poses a significant challenge in circular economy strategies. Olive mill wastes (OMW) contain valuable biomolecules, especially phenolic compounds, with significant agricultural potential. Our study evaluate the effects of phenolic extract (PE) derived from olive mill solid wastes (OMSW) on pomegranate agro-physiological and biochemical responses, as well as soil-related attributes. Pomegranate plants were treated with PE at doses of 100 ppm and 200 ppm via foliar spray (L100 and L200) and soil application (S100 and S200). Results showed increased biomass with PE treatments, especially with soil application (S100 and S200). Proline and soluble sugar accumulation in leaves suggested plant adaptation to PE with low-level stress. Additionally, PE application reduced malondialdehyde (MDA) and hydrogen peroxide (H2O2) contents. Higher doses of PE (S200) significantly improved net photosynthesis (Pn), transpiration rate (E), water use efficiency (WUEi), and photosynthetic efficiency (fv/fm and PIabs). Furthermore, PE treatments enhanced levels of chlorophylls, carotenoids, polyphenols, flavonoids, and antioxidant activity. Soil application of PE also increased soil enzyme activities and microbial population. Our findings suggest the beneficial impact of PE application on pomegranate agro-physiological responses, laying the groundwork for further research across various plant species and soil types to introduce nutrient-enriched PE as an eco-friendly biostimulant.

A review of solid wastes-based stabilizers for remediating heavy metals co-contaminated soil: Applications and challenges.

The remediation of heavy metals/metalloids (HMs) co-contaminated soil by solid wastes-based stabilizers (SWBS) has received major concern recently. Based on the literature reported in the latest years (2010-2023), this review systematically summarizes the different types of solid wastes (e.g., steel slag, coal fly ash, red mud, and sewage sludge, etc.) employed to stabilize HMs contaminated soil, and presents results from laboratory and field experiments. Firstly, the suitable solid wastes for soil remediation are reviewed, and the pros and cons are presented. Thereafter, the technical feasibility and economic benefit are evaluated for field application. Moreover, evaluation methods for remediation of different types of HMs-contaminated soil and the effects of SWBS on soil properties are summarized. Finally, due to the large specific surface, porous structure, and high reactivity, the SWBS can effectively stabilize HMs via adsorption, complexation, co/precipitation, ion exchange, electrostatic interaction, redox, and hydration process. Importantly, the environmental implications and long-term effectiveness associated with the utilization of solid wastes are highlighted, which are challenges for practical implementation of soil stabilization using SWBS, because the aging of soil/solid wastes has not been thoroughly investigated. Future attention should focus on modifying the SWBS and establishing an integrated long-term stability evaluation method.

Precision co-composting of multi-source organic solid wastes provide a sustainable waste management strategy with high eco-efficiency: a life cycle assessment.

With the increase of organic solid wastes (OSWs), current waste management practices, such as landfill, incineration, and windrow composting, have shown weaknesses in both resource recycling and environmental protection. Co-composting has been used to achieve nutrient and carbon recycling but is accused of high ammonia emission and low degradation efficiency. Therefore, this study developed a precision co-composting strategy (S3, which adds functional bacteria generated from food processing waste to a co-composting system) and compared it with the current OSW treatment strategy (S1) and traditional co-composting strategy (S2) from a life cycle assessment (LCA) perspective. The results showed that compared with S1, the eco-efficiency increased by 31.3% due to the higher economic profit of S2 but did not directly reduce the environmental cost. The addition of bacterial agents reduced ammonia emissions and shortened composting time, so compared with S1 and S2, the environmental cost of S3 was reduced by 37.9 and 43.6%, while the economic profit increased by 79.8 and 24.4%, respectively. The changes in environmental costs and economic benefits resulted in a huge improvement of S3's eco-efficiency, which was 189.6 and 121.7% higher than S1 and S2. Meanwhile, the adoption of S3 at a national scale in China could reduce the emission of 1,4-dichlorobenzene by 99.9% compared with S1 and increase profits by 6.58 billion USD per year. This study proposes a novel approach that exhibits high eco-efficiency in the treatment of OSWs.

Techno-environmental analysis to valorize the secondary energy resources from refuse-derived fuel-based waste to energy plant.

The present study quantifies the environmental and sustainability impacts associated with municipal solid waste management (MSWM) in India which plays a vital environmental issue in recent times. The upsurge in population has resulted in massive waste generation, leading to a concerning rise in the level of greenhouse gas (GHG) emissions. Therefore, the sustainable management of MSW has been discussed and highlights the conversion of MSW into refuse-derived fuel (RDF) to identify its potential for generating electricity in waste-to-energy (WtE) plants. The life cycle assessment (LCA) study has been done to identify and compare the environmental impacts associated with different scenarios (SC) as SC1: landfilling without energy recovery, SC2: open burning and SC3: processing of RDF in WtE plant by considering the nine impact categories from the inventory data obtained over a period of 12 consecutive months (Jan 2021-Jan 2022). The results exhibited that the global warming potential caused by emissions of GHG are in the order of SC1 (1188 kg CO2 eq) > SC2 (752 kg CO2 eq) > SC3 (332 kg CO2 eq), respectively from 1 t of MSW. It is concluded that the WtE plant can help in the reduction of environmental issues, strengthening the capacity of electricity generation and improving the aesthetic view of the city which is socially acceptable as well. Thus, WtE technology can help in achieving sustainable development goal 12 to regenerate the sustainable secondary resources for the twenty-first century and minimize global climate change.

Ultrarapid and Sustainable Synthesis of Trimetallic-Based MOF (CrNiFe-MOF) from Stainless Steel and Disodium Terephthalate-Derived PET Wastes.

Designing easy and sustainable strategies for the synthesis of metal-organic frameworks (MOFs) from organic and inorganic wastes with the efficient removal of phosphate from water remains a challenge. The majority of the reported works have utilized costly precursors and nonsoluble ligands for the synthesis of MOFs. Herein, we have developed a low-cost, simple, and sustainable alternative approach using the coprecipitation method in water at room temperature for the synthesis of a new adsorbent-based trimetallic MOF. Poly(ethylene terephthalate) and stainless steel wastes were used as sources of water-soluble disodium terephthalate ligand and three metallic species (chromium, nickel, and iron salts) for the fabrication of trimetallic MOF (CrNiFe-MOF), respectively. The newly developed MOF demonstrates a superior space-time yield of 5760 g m-3 day-1, reaching a level allowing the industrialization production of this sustainable MOF. The scanning electron microscopy and adsorption studies revealed that the developed trimetallic MOF consists of aggregated nanoparticles and the presence of defective as well as mesoporous structures. This MOF showed an enhanced adsorption capacity of phosphate from real eutrophic water samples and higher stability in a range of pHs. The density functional theory calculations evidenced that the phosphate ions preferentially adsorb over H2O toward the metal oxo-trimers, with the adsorption energies increasing from H3PO4 to PO43- species in line with an improvement of the adsorption performance of CrNiFe-MOF when the pH increases, i.e., when HPO42- and PO43- become more predominant. These calculations also supported that the incorporation of Cr metal sites in the oxo-trimer is expected to boost the phosphate affinity of the MOF. Finally, our work provides an easy and eco-friendly approach for MOF designing to enhance phosphate removal from water.

CuxMg1-xFe2O4-type spinels as potential oxygen carriers for waste wooden biomass combustion.

Waste wood biomass is considered a renewable energy source. Combining biomass combustion with emerging clean combustion technologies such as chemical looping combustion (CLC) can yield effective and affordable carbon capture and, consequently, lead to negative net emissions of greenhouse gases. Oxygen carrier (OC) is a crucial material in CLC technology that must exhibit certain properties, such as high durability, good chemical stability during numerous red-ox cycles and, important for the combustion of solid fuels, the capability of spontaneously releasing oxygen in a process referred to as chemical looping with oxygen uncoupling (CLOU). In this work, a series of nine CuxMg1-xFe2O4 spinel-based materials were synthetized and evaluated for the first time as potential OCs for a waste biomass combustion. Their properties, such as oxygen transport capacity and reactivity with biomass (wood chips) as a fuel, were evaluated in a function of temperature (900-1000 °C). Tested oxygen carriers were characterized with an excellent oxygen transport capacity in CLOU process (up to 2.78 wt%) and good reaction rates with the fuel (up to 1.19 wt. %/min), and regeneration rates (up to 3.8 wt. %/min). High conversion of the waste biomass was also achieved (98.9 %). Moreover, new findings revealed a strong positive effect of magnesium addition on mechanical strength (crushing strength > 4 N for samples with Mg content above 0.5).

Assessment of inorganic solid waste management techniques using full consistency and extended MABAC method.

Population and industrial growth have spiked product consumption, which in turn have caused an abrupt rise in municipal solid waste (MSW) production. Due to the lack of resources allocated to waste management, municipal inorganic solid waste (ISW) has increased exponentially, posing a significant strain on the environment and health. To mitigate these issues, sustainable waste management strategies need to be implemented to reduce environmental impacts and improve waste collection and disposal efficiency. The objective of our work was to analyse and identify the most effective techniques for disposing of ISW in India by employing multi-criteria decision-making (MCDM). This technique entails selecting the most suitable alternative based on a variety of competing and interactive criteria. A fusion decision model named the FULL COnsistency Method (FUCOM) and Multi-Attributive Border Approximation area Comparison (MABAC) based on the interval-valued q-rung orthopair fuzzy (IV q-ROF) was developed. Finally, a comparative analysis was performed to demonstrate the system's robustness.

Chemical characteristics and valuation of sewage sludge from four different wastewater treatment plants.

Sewage sludge contains plant nutrients and organic matter in its composition, making it a potential partial substitute for mineral fertilizers if it meets environmental, agronomic, and sanitary standards. The objective was to evaluate the content of nutrients and heavy metals in the sludge generated in four wastewater treatment stations (WWTPs) in Rio de Janeiro state and assess its potential value and usefulness. The samples of 19 batches from the WTTPs Alegria, Barra da Tijuca, Ilha do Governador, and Sarapuí were analyzed. The WWTPs differ in methods and processes used for treating sewage and sludge. The total contents of C, N, P, K, Ca, Mg, Fe, Al, Na, Co, Mn, As, Ba, Cd, Cr, Cu, Ni, Se, Pb, and Zn were evaluated, as well as the ratio C/N, pH, organic matter content, and electrical conductivity. The grouping of sludge samples was assessed using principal components (PCA) and cluster analysis. The economic valuation of sludge was conducted utilizing the substitute goods method, which compared the sludge's N-P-K contents with the prices of consolidated nutrient sources. All the evaluated sludge batches exhibited concentrations of heavy metals below the limits allowed by Brazilian law, along with high levels of nutrients and organic matter. Considering the chemical characteristics, all evaluated materials showed potential for agricultural use, but it is crucial to evaluate the microbiological characteristics of sludge batches before agriculture application. PCA and cluster analysis demonstrated that sludge samples from the same WWTP clustered close to each other, demonstrating higher similarity among themselves than with samples from other WWTPs. The sludge had an average added value of U$ 88.46 per megagram, considering the total contents of N, P, and K in its composition. Land application of sewage sludge can reduce the need to purchase mineral fertilizers, thereby supporting the feasibility of reusing this material in the agricultural sector.

Lithium Slag and Solid Waste-Based Binders for Cemented Lithium Mica Fine Tailings Backfill.

To mitigate the adverse effects of fine-grained lithium mica tailings and other solid wastes generated from the extraction of lithium ore mining, as well as the limitations of traditional cement-based binders for lithium mica fine tailings, this study explores the feasibility of using a binder composed of ordinary Portland cement, lithium slag, fly ash, and desulfurization gypsum to stabilize lithium fine tailings into cemented lithium tailings backfill. Compared with traditional cementitious binders, an extensive array of experiments and analyses were conducted on binders formed by various material proportion combinations, employing uniaxial compressive strength tests, microstructural morphology, grayscale analyses, and flowability tests. The results show the following: (1) In this study, an LSB binder exhibiting superior mechanical properties compared to traditional cementitious binders was identified, with an optimal OPC:LS:FA:DG ratio of 2:1:1:1. (2) In the context of cemented lithium mica fine tailings, the LSB-CLTB material exhibits higher unconfined compressive strength and lower self-weight compared to OPC-CLTB materials. At a binder content of 10 wt%, the UCS values achieved by the LSB-CLTB material at curing periods of 7 days, 14 days, and 28 days are 0.97 MPa, 1.52 MPa, and 2.1 MPa, respectively, representing increases of 40.6%, 34.5%, and 44.8% over the compressive strength of OPC-based materials under the same conditions. (3) The LSB binder not only exhibits enhanced pozzolanic reactivity but also facilitates the infilling of detrimental pores through its inherent particle size and the formation of AFt and C-(A)-S-H gels via hydration reactions, thereby effectively improving the compressive strength performance of fine-grained tailings backfill.

Gas-Pressurized Torrefaction of Lignocellulosic Solid Wastes: Deoxygenation and Aromatization Mechanisms of Cellulose.

A novel gas-pressurized (GP) torrefaction method at 250 °C has recently been developed that realizes the deep decomposition of cellulose in lignocellulosic solid wastes (LSW) to as high as 90% through deoxygenation and aromatization reactions. However, the deoxygenation and aromatization mechanisms are currently unclear. In this work, these mechanisms were studied through a developed molecular structure calculation method and the GP torrefaction of pure cellulose. The results demonstrate that GP torrefaction at 250 °C causes 47 wt.% of mass loss and 72 wt.% of O removal for cellulose, while traditional torrefaction at atmospheric pressure has almost no impact on cellulose decomposition. The GP-torrefied cellulose is determined to be composed of an aromatic furans nucleus with branch aliphatic C through conventional characterization. A molecular structure calculation method and its principles were developed for further investigation of molecular-level mechanisms. It was found 2-ring furans aromatic compound intermediate is formed by intra- and inter-molecular dehydroxylation reactions of amorphous cellulose, and the removal of O-containing function groups is mainly through the production of H2O. The three-ring furans aromatic compound intermediate and GP-torrefied cellulose are further formed through the polymerization reaction, which enhances the removal of ketones and aldehydes function groups in intermediate torrefied cellulose and form gaseous CO and O-containing organic molecules. A deoxygenation and aromatization mechanism model was developed based on the above investigation. This work provides theoretical guidance for the optimization of the gas-pressurized torrefaction method and a study method for the determination of molecular-level structure and the mechanism investigation of the thermal conversion processes of LSW.

Production and characterisation of solid waste-derived fuel briquettes from mixed wood wastes and waste pet bottles.

Wood waste and waste Polyethylene Terephthalate (PET) bottles are two of the solid wastes posing severe challenges to waste management facilities and constituting nuisance to humans and the environment in Nigeria due to poor management. These wastes could be utilized to produce solid biofuels for various energy applications to reduce CO2 emissions. This study, therefore, aims to investigate the potential of converting these wastes locally into solid waste-derived fuels (SWDF) briquettes in a bid to present an alternative approach to managing them. Four types of SWDF briquettes were produced from mixed wood waste and waste PET bottles in blend ratios of 100:0, 60:40, 50:50, and 40:60 using a screw press briquetting machine with single extrusion die. The effect of PET plastic amount on different properties, such as net calorific value, ash content, durability, and density, of the produced briquettes was investigated. In addition, obtained results were compared with the quality standards of densified fuels specified by the European Pellet Council. to ascertain the quality of the produced SWDF briquettes. The results revealed that the SWDF briquettes made only from mixed wood waste exhibited the lowest calorific value (17.15 MJ/kg) and highest ash content (2.74 %), while the SWDFs made from blends of mixed wood waste and PET bottles had higher calorific values (17.85-20.77 MJ/kg) and lower ash contents (1.05-1.37 %). Moreover, except for density and chlorine content (<750 kg/m3 and <0.03 wt% respectively), all the produced SWDFs complied with the quality standards of densified fuels specified by the European Pellet Council. These results suggest that these blends could yield SWDFs with improved quality and combustion properties, and could present a new way of managing these solid wastes.

Investigating on the Pavement Performance of Multi-Source Solid Wastes by Cement and Fly Ash.

In order to advance the utilization rate of multi-source solid wastes in the Ningxia region of China, 16 groups of pavement base mixtures were designed with cement and fly ash (FA) as binders, steel slag (SS), silicon manganese slag (SMS), and recycled crushed stone (RCS) as composite aggregates. The evolution laws of mechanical and frost resistance properties of the mixture were investigated by unconfined compressive strength (UCS), indirect tensile strength (ITS), freeze-thaw (FT), and ultrasonic detection tests. Then, the strength formation mechanisms were revealed by microscopic characterization technology. The mathematical models between UCS-ITS, UCS-ultrasonic amplitude, FT cycles-UCS damage, and frost resistance coefficient-relative dynamic elastic modulus Er were established. The results show that cement content and curing age exhibited a positive effect on the mechanical strength and frost resistance of the mixture. When the replacement rate of SS was 60%, the mechanical strength and frost resistance were preferable. The R2 of the strength relationship models constructed was greater than 0.9, indicating high fitting accuracy. With the extension of the curing age, the cementitious products such as C-S-H (hydrated calcium silicate) and AFt (ettringite) developed entirely, and they were interlocked and cemented with each other, resulting in the micro-morphology developed from the three-dimensional network structure to the dense system. The macroscopic behavior incarnated that the mechanical strength and frost resistance of the mixture were significantly enhanced.

The current status and future of solid waste recycled building bricks.

Solid waste (SW) has become a problem hindering the economic and social development. Achieving the full green cycle from raw material to production of recycled building bricks (RBB) using SW is the focus of future research. In this paper, the research results of RBB manufacturing using SW in recent years are reviewed. According to the consolidation principle of RBB, the effects of different types of SW on the physicochemical properties and microstructure of RBB are summarized based on the recycled unsintered brick (RUSB) and recycled sintered brick (RSB). By comparing and evaluating the two consolidation methods, it is proposed that RSB has good practicality due to its higher SW utilization rate, higher strength, and faster consolidation speed. Furthermore, the difference between MWS and conventional sintering (CS) is analyzed, and the research on the application of MWS in SW-RBB manufacturing in recent years is reviewed in detail. It is pointed out that microwave sintering (MWS) technology can solve many drawbacks in traditional sintering technology and has great prospects in manufacturing SW-RBB due to the low energy consumption, low pollution, and high efficiency. Finally, the shortcomings and possible challenges in the current research on manufacturing SW-RBB using MWS technology are discussed, which provides guidance for the future development of SW-RBB manufacturing.

Mass Transfer Enhancement in High-Solids Anaerobic Digestion of Organic Fraction of Municipal Solid Wastes: A Review.

The increasing global population and urbanization have led to a pressing need for effective solutions to manage the organic fraction of municipal solid waste (OFMSW). High-solids anaerobic digestion (HS-AD) has garnered attention as a sustainable technology that offers reduced water demand and energy consumption, and an increased biogas production rate. However, challenges such as rheology complexities and slow mass transfer hinder its widespread application. To address these limitations, this review emphasizes the importance of process optimization and the mass transfer enhancement of HS-AD, and summarizes various strategies for enhancing mass transfer in the field of HS-AD for the OFMSW, including substrate pretreatments, mixing strategies, and the addition of biochar. Additionally, the incorporation of innovative reactor designs, substrate pretreatment, the use of advanced modeling and simulation techniques, and the novel conductive materials need to be investigated in future studies to promote a better coupling between mass transfer and methane production. This review provides support and guidance to promote HS-AD technology as a more viable solution for sustainable waste management and resource recovery.

Onsite treatment of wastes in municipal waste incinerator: Co-sintering of fly ash and leachate sludge into value-added ceramic granule.

The leachate sludge (LS) and fly ash (FA) are the foci of hazardous wastes which generated from the municipal solid waste incineration (MSWI). The current work developed a new way to use energy from MSWI process for the on-site sintering of LS and FA at a relatively low temperature. With the assistance of CaF2, granule of LS and MSWI FA were co-sintered. The influence of temperature, the mass of CaF2, and the mass ratio of LS/MSWI FA were investigated. As a result, heavy metals volatilization and leaching in the form of chlorinated salts were controlled. In addition, CaF2 improved the compressive strength of the granule under low-temperature sintering. Moreover, the scale-up co-sintering test was achieved in an MSWI chamber. The results showed that the optimum condition was sintering at 973K for 1 h. The compressive strength of sintered product reached 4.25 MPa, which met the standard of ceramic granule. Moreover, with the addition of CaF2, the volatilization rate of Pb, Zn, and Cd decreased by 6%, 7%, and 6%, respectively. This method can be a promising technique for the utilization of solid wastes.