Closed reduction of fracture-dislocation of the sub-axial cervical spine with Gardner-Wells tongs. Technical note.

Study design: Technical note. Purpose: To provide a technical description of the placement of Gardner-Wells tongs and the performance of awake cranio-cervical traction to reduce AO type C injuries of the sub-axial cervical spine with Gardner-Wells tongs. Methods: In this technical note, the authors present the indications, the contraindications, the pull-out of the pins, a detailed description of the technique for its proper placement, traction reduction technique, reduction maneuvers, complications and post-reduction care. Results: Awake reduction of AO type C injuries of the sub-axial cervical spine can be successfully performed using Gardner-Wells tongs. Conclusions: There is sufficient evidence to recommend the use of cranio-cervical traction in these vertebral injuries; however, we lack a detailed technical note to guide its proper placement.

Delayed Sub-axial Fracture Dislocation Surgical Management: Technical Notes and Review of the Literature.

The surgical treatment of delayed, unstable sub-axial cervical spine injuries is challenging. Multiple treatment regimens have been described in the literature, although there is no consensus regarding the best treatment approach. This report presents a 35-year-old obese woman who experienced a delayed sub-axial fracture-dislocation following a motor vehicle accident (MVA) and was successfully managed after three weeks via pre-operative traction followed by a novel single-surgery, single-approach technique with pedicle screws and tension-band wiring as a reduction method. A 35-year-old obese woman with a body mass index (BMI) of 30.1 sustained a frontal impact MVA and suffered from complete quadriplegia below C5 (American Spinal Cord Association Injury A) three weeks prior to presentation. She was intubated and presented with a Glasgow Coma Scale score of 11/15. Trauma computed tomography (CT) showed an isolated spine injury. Moreover, whole-spine CT showed an isolated cervical spine injury involving a basin tip fracture, a comminuted C1 arch fracture, a C2 fracture, and a C6-C7 fracture-dislocation. In addition, magnetic resonance imaging revealed cord contusion at the same level, with C1-C2 left atlantoaxial joint instability. Neck magnetic resonance angiograms and carotid CT angiograms showed left vertebral artery attenuation. She was admitted to the intensive care unit and taken for C6-C7 reduction and instrumentation using only a posterior approach after medical optimization and the application of sufficient traction. Delayed cervical spine fracture-dislocation imposes a challenge for surgical reduction. However, a proper reduction can be achieved through a sufficient duration of pre-operative traction and an isolated anterior or posterior approach.

Morphometric Study of Sub Axial Cervical Spine Pedicles in Nepalese Population.

BACKGROUND: Mal-positioning of cervical screws risks neurovascular injury so, it is necessary to understand cervical pedicle morphology for pedicle screw fixation in the region. The risks of pedicle screw insertion in the cervical spine can be mitigated by a three-dimensional appreciation of pedicle anatomy. The study aims to determine the morphology of the sub axial cervical spine pedicles in Nepalese Population based on computerized tomography. METHODS: A cross-sectional study using computerized tomography scans of the spine was made among the randomly selected 87 patients who had visited National Trauma center, Kathmandu, Nepal with vertebral fracture other than cervical vertebrae. Patient was examined as per Advanced Trauma Life support protocol and neurological assessment. Measurement was done from the third cervical vertebra down to the seventh cervical vertebra in computer with standard software in the department of radiology from where all the computerized tomography scan reporting are done. RESULTS: The mean pedicle length ranged from 4.41 mm at C3 to 4.96 mm at C7 where mean pedicle height ranged from 4.64 at C3 to 5.12 at C7. Pedicle length, pedicle height and pedicle width were observed to be statistically significant with gender. The pedicle axial length of C3 and C7 vertebra were found significant with gender. All parameters were found to be greater in male compared to female. CONCLUSIONS: The study revealed that pedicle length, pedicle height, pedicle width, pedicle axial length increased from third to seventh cervical however, transverse angulation increased up to fifth vertebra and decreased to seventh vertebra.

Cervical spine TB - Current concepts in management.

OBJECTIVE: Cervical tubercular disease (CTB) is a rare pathology and constitutes 3-5% of all spinal TB. It includes atlantoaxial TB and sub-axial TB. As the literature evidence on this subject is scarce, majority of issues concerning CTB are still controversial. The current narrative review comprehensively discusses the various aspects related to CTB. Literature search: An elaborate search was made using keywords cervical tuberculosis, atlantoaxial tuberculosis, sub-axial tuberculosis, and cervico-thoracic tuberculosis, on pubmed and google (scholar.google.com) databases on 2 December 2020. We identified crucial questions regarding CTB and included relevant articles pertaining to them. RESULTS: The initial search using keywords cervical tuberculosis, atlantoaxial tuberculosis, sub-axial tuberculosis, and cervico-thoracic tuberculosis yielded 4128, 76, 3 and 9 articles on 'pubmed' database, respectively. A similar search using the aforementioned keywords yielded 1,96,000, 2130, 117 and 728 articles on 'google scholar' database. The initial screening resulted in the identification of 178 articles. Full manuscripts were obtained for these articles and thoroughly scrutinised at the second stage. Review articles, randomised controlled trials and level 1 studies were given preference. Overall, 41 articles were included. CONCLUSION: AATB and SACTB constitute 0.3 to 1% and 3% of spinal TB, respectively. The incidence of neuro-deficit in CTB is significantly more than other spinal TB. The general principles of management of CTB are similar to spinal TB elsewhere and medical therapy remains the cornerstone. Surgery is advocated in specific scenarios involving gross neuro-deficit, later stages of disease with significant bony/ligamentous disruptions, altered sagittal balance, drug resistance, and poor response to medications. The surgical approaches for AATB include anterior-alone, posterior-alone and combined approaches, although posterior access is the most preferred. Most of the studies on SACTB have supported the role of anterior approach. Additionally, posterior stabilisation may be necessary in specific scenarios. The overall long-term outcome in CTB is favourable.

Craniovertebral junction instability in Larsen syndrome: An institutional series and review of literature.

OBJECTIVE: Larsen syndrome (LS) is characterized by osteo-chondrodysplasia, multiple joint dislocations, and craniofacial abnormalities. Symptomatic myelopathy is attributed to C1-C2 instability and sub-axial cervical kyphosis. In this article, we have analyzed the surgical outcome after posterior fixation in LS with craniovertebral junction instability. METHODS: Ten symptomatic pediatric patients, operated between 2011 and 2019, were included, and the clinical outcome was assessed by Nurick grade, neurological improvement, and complications. The requirement of anti-spasticity drugs, the degree of bony fusion, and restriction of neck movement were also noted. At last follow-up, patient satisfaction score (PSS) and back to school status were studied. We also reviewed the literature and categorized two types of presentation of reported LS patients and discussed the pattern of disease progression among both. RESULTS: Ten patients, age range 1.5-16 years, underwent 12 surgeries (6 C1-C2 fixation, 4 long-segment posterior cervical fixation, and 2 trans-oral decompressions as the second stage); the mean follow-up was 23 (range, 6-86 months). All the ten patients in our study had the characteristic "dish-" like face and nine patients had acral anomalies. The median Nurick grade improved from preoperative (median = 4) to follow-up (median = 3). The requirement of anti-spasticity drugs decreased in seven patients and the neck-pain improved in nine patients. The median satisfaction at follow-up was good (median PSS = 2); five patients were going back to school. CONCLUSION: Craniovertebral junction instability in LS is rare and surgically challenging. Early posterior fixation showed a promising outcome with a halt in the disease progression.

Effect of Sub-axial Cervical Lateral Mass Screw Fixation on Functional Outcome in Patients with Cervical Spondylotic Myelopathy.

BACKGROUND: The role of laminectomy alone as an etiology of postoperative cervical instability is well known. Cervical sagittal malalignment of the spine has been linked to unfavorable functional outcome, so the effect of restoration of sagittal spinal alignment on functional outcomes and treatment effectiveness has recently gained attention. OBJECTIVE: This is a prospective observational study aims to observe the possible relation between cervical sagittal alignment and functional outcomes following sub-axial cervical lateral mass screw fixation in patients with cervical spondylotic myelopathy. PATIENTS AND METHODS: Thirty patients were included in this study all suffering from cervical spondylotic mylopathy (CSM) who underwent cervical laminectomy and screw-rod fixation and followed up over 6 months. Functional outcome accessed using Nurick myelopathy score and neck disability index (NDI)?. We also used the Cobb angle method (C2-C7) as a parameter for radiographic assessment of the cervical sagittal alignment which was measured preoperatively and postoperatively on lateral neutral views of cervical X-ray. RESULTS: All the patients underwent cervical laminectomy and fixation in a range of 3-5 levels. Two intraoperative facet fractures and four facet joint violations were observed. All the patients were followed-up for at least 6 months. There were significant improvements of the motor power (88.5%), Nurick score (90%), and NDI (90%) postoperatively. The mean preoperative Cobb angle for all patients was -8.51° ± 14.07° standard deviation (SD) which changed to -10.29 ± 12.43 SD at the end of follow-up. CONCLUSION: Combing posterior decompression with lateral mass screw- rod in patients with CSM was effective in improving or at least maintaining cervical alignment with the good functional outcome.

Nursing care of lower cervical spine fracture treated with 3D print microporous titanium artificial vertebral body / 中国实用护理杂志

Objective To summarize the perioperative nursing measures and effects of 3D printed artificial cervical vertebrae for lower cervical spine fractures. Methods Treatment of 15 cases of lower cervical spine fracture with 3D printed artificial cervical vertebrae. Preoperative cervical spine fixation to prevent spinal cord injury, strict observation of clinical symptoms, assist the doctor to perform CT three-dimensional reconstruction of the cervical spine, and calculate the physiological height of the injured vertebrae; maintain the surgical position fixed during surgery, carefully prepare the supporting equipment, familiar with the surgical related steps, accurate delivery of all types of surgical instruments to assist with intraoperative fluoroscopy. Postoperative focus on the neck to see if there is swelling, effectively maintain the airway patency, observe changes in spinal nerve function, develop a personalized functional exercise program to promote rehabilitation, and actively prevent complications. Results The JOA score increased from (9.23 ± 1.62) points before surgery to (14.09 ± 1.35) points after surgery, and the improvement rate was 62.55%. There were no complications such as difficulty swallowing, hoarseness, and difficulty breathing. Conclusions Through targeted perioperative care, surgical complications can be reduced and the quality of life of patients improved.

Nursing care of lower cervical spine fracture treated with 3D print microporous titanium artificial vertebral body / 中国实用护理杂志

Objective@#To summarize the perioperative nursing measures and effects of 3D printed artificial cervical vertebrae for lower cervical spine fractures.@*Methods@#Treatment of 15 cases of lower cervical spine fracture with 3D printed artificial cervical vertebrae. Preoperative cervical spine fixation to prevent spinal cord injury, strict observation of clinical symptoms, assist the doctor to perform CT three-dimensional reconstruction of the cervical spine, and calculate the physiological height of the injured vertebrae; maintain the surgical position fixed during surgery, carefully prepare the supporting equipment, familiar with the surgical related steps, accurate delivery of all types of surgical instruments to assist with intraoperative fluoroscopy. Postoperative focus on the neck to see if there is swelling, effectively maintain the airway patency, observe changes in spinal nerve function, develop a personalized functional exercise program to promote rehabilitation, and actively prevent complications.@*Results@#The JOA score increased from (9.23±1.62) points before surgery to (14.09±1.35) points after surgery, and the improvement rate was 62.55%. There were no complications such as difficulty swallowing, hoarseness, and difficulty breathing.@*Conclusions@#Through targeted perioperative care, surgical complications can be reduced and the quality of life of patients improved.

Anatomical evaluation of the vertebral artery (V2) and its influence in cervical spine surgery.

OBJECTIVE: The aim of this study was to quantitatively evaluate the surgical anatomy of the vertebral artery and the sub-axial spine to assess their influence on cervical spine surgery. PATIENTS AND METHODS: Retrospective data was evaluated from a total of 275 three-dimensional head and neck CT-angiograms. Vertebral artery diameter (VAD) and the distance between the uncinate process superior ridge and vertebral artery (UPVD) were measured. The minimum pedicle transverse angles (miPTAs), maximum PTA (MxPTAs), pedicle width (PW) and range of PTA (rPTA) were also measured. RESULT: The mean value of the right UPVD was larger than that on the left: 4.5 vs. 3.6 mm (C3), 3.4 vs. 2.8 mm (C4), 3.0 vs. 2.5 mm (C5) and 3.1 vs. 2.4 mm (C6), respectively. The mean value of miPTA (32.2 vs. 31.7°: C3, 36.9 vs. 35.2°: C4, 35.3 vs. 33.9°: C5 and 29.9 vs. 29.2°: C6) and MxPTA (56 vs. 55.6°: C3, 61.7 vs. 60°: C4, 60.3 vs. 58.5°: C5 and 54.9 vs. 55°: C6) showed no statistical significance of laterality. The mean value of PW and rPTA ranged between 5.0-5.8 mm and 23.8-25.8° on both sides. CONCLUSIONS: Generally, right and mid- cervical segment decompression was found to be more secure than that on the left and in the lower cervical segment during an anterior cervical approach, considering the values of VAD and UPVD. Results of this study indicate that more attention should be paid to the mid-cervical pedicle screw fixation regarding the miPTA value, and rPTA (23.9-25.8°) should be maintained constantly regardless of cervical segment.

Neglected dislocation in sub-axial cervical spine: Case series and a suggested treatment protocol.

CONTEXT: Approaches suggested for treatment of neglected dislocations in the subaxial cervical spine (SACS) include only anterior approach (a), only posterior approach (b), posterior-anterior approach, posterior-anterior-posterior approach, and anterior-posterior-anterior-posterior approach. No protocol is suggested in literature to guide surgeons treating neglected dislocations. AIM: To describe a protocol for the treatment of neglected dislocation in the SACS. SETTINGS AND DESIGNS: Retrospective case series and review of literature. MATERIALS AND METHODS: Six consecutive patients of neglected dislocation (presenting to us more than 3 weeks following trauma) of the SACS were operated as per the protocol suggested in this paper. A retrospective review of the occupational therapy reports, patient records, and radiographs was performed. Only cases with time lapse of more than 3 weeks between the time of injury and initial management have been included in the review. RESULTS: Closed reduction (CR) was achieved in three patients following cervical traction and these were managed by anterior cervical discectomy and fusion (ACDF). Open reduction via posterior approach and soft tissue release was required to achieve reduction in two patients. Following reduction posterior instrumented fusion was done in them. One patient with preoperative neurological deficit needed a facetectomy to achieve reduction. Following short-segment fixation, ACDF was also performed in this patient. None of the patients deteriorated neurologically following surgery. Fusion was achieved in all patients. CONCLUSIONS: Preoperative and intraoperative traction have a role in the management of neglected dislocations in the cervical spine. If CR is achieved the patient may be managed by ACDF. If CR is not achieved, posterior soft tissue release may be done to achieve reduction and partial facetectomy must be reserved for cases in which reduction is not achieved after soft tissue release. A treatment protocol for management of neglected dislocation in the SACS has been suggested in this paper.

Evaluation of the SLICS use in the treatment of subaxial cervical spine injuries / Avaliação do SLICS no tratamento das lesões da coluna cervical sub-axial

The SLICS (Sub-axial Cervical Spine Injury Classification System) was proposed to help in the decision-making of sub-axial cervical spine trauma (SCST), even though the literature assessing its safety and efficacy is scarce. Method We compared a cohort series of patients surgically treated based on surgeon’s preference with patients treated based on the SLICS. Results From 2009-10, 12 patients were included. The SLICS score ranged from 2 to 9 points (mean of 5.5). Two patients had the SLICS < 4 points. From 2011-13, 28 patients were included. The SLICS score ranged from 4 to 9 points (mean of 6). There was no neurological deterioration in any group. Conclusion After using the SLICS there was a decrease in the number of patients with less severe injuries that were treated surgically. This suggests that the SLICS can be helpful in differentiating mild from severe injuries, potentially improving the results of treatment. .

O SLICS (Sub-axial Cervical Spine Injury Classification System) foi proposto para auxílio na tomada de decisão no tratamento do traumatismo da coluna cervical sub-axial. Contudo, existem poucos trabalhos que avaliem sua segurança e eficácia. Método Realizamos estudo comparativo de série histórica de pacientes operados baseados na indicação pessoal do cirurgião com pacientes tratados baseados na aplicação do SLICS. Resultados Entre 2009-10, 12 pacientes foram incluídos. O SLICS escore variou de 2 a 9 pontos (média de 5,5) com dois pacientes com escore menor que 4. Entre 2011-13, 28 pacientes foram incluídos. O escore de SLICS variou de 4 a 9 pontos, com média de 6. Conclusão Observamos que após o uso do SLICS houve uma diminuição do número de pacientes operados com lesões mais estáveis. Isso sugere que o SLICS pode ser útil para auxiliar a diferenciação de lesões leves das graves, eventualmente melhorando os resultados do tratamento. .

Morphometric analysis of the cervical facets and the feasibility, safety, and effectiveness of Goel inter-facet spacer distraction technique.

AIM: Quantitative anatomy of the facets of the sub-axial cervical spine was performed. The purpose of the evaluation was to determine the feasibility of insertion of Goel inter-facetal articular spacers in the sub-axial cervical spine. Only few studies detailing the morphometry of the facets are available in the literature. MATERIALS AND METHODS: Ten cervical vertebrae from C3 to C7 with a total of 20 facets were evaluated by the author. The anatomic parameters studied were the height, width, thickness, shape, orientation, and inclination of each of the superior and inferior facets. The alterations in a number of intervertebral segmental distances were measured before and after spacer insertion. The distance of the inferior facet from the foramen tranversarium, spinal canal, and neural foramina was measured to assess safety of spacer insertion with respect to the vertebral artery and neural structures. RESULTS: The height, width and thickness of the superior facets from C3 to C7 ranged from 6 to 12 mm, 8 to 12 mm, and 2.5 to 6 mm, respectively. The inferior facets had an average height of 10.5 mm, average width of 11.2 mm and average thickness of 3.5 mm. The inclination of the superior facets with respect to the transverse plane ranged from 22° to 45° and that of the inferior facets ranged from 29° to 53°. The distance of the anterior margin of the inferior facet from the posterior border of the foramen transversium ranged from 5 to 7 mm. This distance was maximum at C3 level, then decreased at C4 and remained constant from C5 to C7. CONCLUSION: This anatomic evaluation aided in understanding the morphology of the cervical facets and the suitability of the cervical facetal articular cavity for insertion of spacers.

C7 intralaminar screw placement, an alternative to lateral mass or pedicle fixation for treatment of cervical spondylytic myelopathy, kyphotic deformity, and trauma: A case report and technical note.

BACKGROUND: The authors present a case to illustrate the necessity and technical feasibility of C7 laminar screw placement for treatment of sub-axial cervical spondylitic myelopathy. The indications for C7 lateral mass screw placement was required internal fixation, with small lateral masses (8 mm) and pedicles (4 mm). CASE DESCRIPTION: A 67-year-old female with compressive myelopathy after a fall from standing is presented. Magnetic resonance (MR) imaging of the cervical spine showed severe C3-6 spondylosis with canal and foraminal compromise. Computed tomography of the cervical spine confirmed the MR imaging findings as well as showed suboptimal lateral mass and pedicles for screw placement. The patient underwent a C3-6 laminectomy, C3-6 lateral mass, and C7 laminar screw placement. Postoperatively, the patient recovered without complication. CONCLUSION: Internal fixation of the cervical spine after iatrogenic destabilization by decompression of neural elements secondary to advanced spondylosis can be technically challenging. Anatomical landmarks needed for safe placement of lateral mass or pedicle instrumentation are often distorted by the patients' advanced pathology or Inherent biology. The C7 screw is a key structural element to a long construct and therefore necessitates large lateral masses or pedicles to safely place a functional screw. C7 laminar screws may be placed safely without fluoroscopic guidance when sufficient C7 lateral mass or pedicle screws are not possible or with undue risk.

Early outcome of surgical intervention in subaxial cervical spine injuries.

OBJECTIVE: To determine the surgical outcome of patients with axial cervical spine fractures. METHODS: The study was conducted at the Spine Unit of Hayatabad Medical Complex, Peshawar, and Aman Hospital, Peshawar, from January 2012 to March 2013. Patients with sub-axial cervical spine fractures were treated surgically. The outcome was measured using Visual Analogue Score, Neck Disability Index, by neurology and on the basis of complications. SPSS 16 was used for statistical analysis. RESULTS: Of the 50 patients in the study, 7(14%) were females, while 43(86%) were male. Overall mean age was 30.3±7.9 years (range: 18-60 years). Major cause of injury was road traffic accidents in 29(58%). A total of 29(58%) patients had dislocation of the spine which was successfully reduced in 22(75.9%). Mean postoperative visual analogue score was 2.9±1.5 (range: 1-7) at last follow-up. Mean neck disability index score was 10.9±5.2 (range: 4-26). Dysphagia was the most common complication in 12(24%). CONCLUSIONS: Majority of the sub-axial fractures can be treated effectively with good outcome through anterior approach. Gradual axial skull traction is an easy and safe method for reduction of cervical fracture dislocations.

Interobserver and Intraobserver Reliability of Sub-Axial Injury Classification and Severity Scale between Radiologist, Resident and Spine Surgeon.

OBJECTIVE: The sub-axial injury classification (SLIC) and severity scale was developed to decide whether to operate the cervical injured patient or not, but the reliability of SLIC and severity scale among the different physicians was not well known. Therefore, we evaluated the reliability of SLIC among a spine surgeon, a resident of neurosurgery and a neuro-radiologist. METHODS: In retrograde review in single hospital from 2002 to 2009 years, 75 cases of sub-axial spine injured patients underwent operation. Each case was blindly reviewed for the SLIC and severity scale by 3 different observers by two times with 4 weeks interval with randomly allocated. The compared axis was the injury morphology score, the disco-ligamentous complex score, the neurological status score and total SLIC score; the neurological status score was derived from the review of medical record. The kappa value was used for the statistical analysis. RESULTS: Interobserver agreement of SLIC and severity scale was substantial agreement in the score of injury morphology [intraclass correlation (ICC)=0.603] and total SLIC and severity sacle (ICC value=0.775), but was fair agreement in the disco-ligamentous complex score (ICC value=0.304). Intraobserver agreements were almost perfect agreement in whole scales with ICC of 0.974 in a spine surgeon, 0.948 in a resident of neurosurgery, and 0.963 in a neuro-radiologist. CONCLUSION: The SLIC and severity scale is comprehensive and easily applicable tool in spine injured patient. Moreover, it is very useful tool to communicate among spine surgeons, residents of neurosurgery and neuro-radiologists with sufficient reproducibility.

Accuracy and Safety in Pedicle Screw Placement in the Thoracic and Lumbar Spines : Comparison Study between Conventional C-Arm Fluoroscopy and Navigation Coupled with O-Arm® Guided Methods.

OBJECTIVE: The authors performed a retrospective study to assess the accuracy and clinical benefits of a navigation coupled with O-arm® system guided method in the thoracic and lumbar spines by comparing with a C-arm fluoroscopy-guided method. METHODS: Under the navigation guidance, 106 pedicle screws inserted from T7 to S1 in 24 patients, and using the fluoroscopy guidance, 204 pedicle screws from T5 to S1 in 45 patients. The position of screws within the pedicle was classified into four groups, from grade 0 (no violation cortex) to 3 (more than 4 mm violation). The location of violated pedicle cortex was also assessed. Intra-operative parameters including time required for preparation of screwing procedure, times for screwing and the number of X-ray shot were assessed in each group. RESULTS: Grade 0 was observed in 186 (91.2%) screws of the fluoroscopy-guided group, and 99 (93.4%) of the navigation-guided group. Mean time required for inserting a screw was 3.8 minutes in the fluoroscopy-guided group, and 4.5 minutes in the navigation-guided group. Mean time required for preparation of screw placement was 4 minutes in the fluoroscopy-guided group, and 19 minutes in the navigation-guided group. The fluoroscopy-guided group required mean 8.9 times of X-ray shot for each screw placement. CONCLUSION: The screw placement under the navigation-guidance coupled with O-arm® system appears to be more accurate and safer than that under the fluoroscopy guidance, although the preparation and screwing time for the navigation-guided surgery is longer than that for the fluoroscopy-guided surgery.

Interobserver and Intraobserver Reliability of Sub-Axial Injury Classification and Severity Scale between Radiologist, Resident and Spine Surgeon

OBJECTIVE: The sub-axial injury classification (SLIC) and severity scale was developed to decide whether to operate the cervical injured patient or not, but the reliability of SLIC and severity scale among the different physicians was not well known. Therefore, we evaluated the reliability of SLIC among a spine surgeon, a resident of neurosurgery and a neuro-radiologist. METHODS: In retrograde review in single hospital from 2002 to 2009 years, 75 cases of sub-axial spine injured patients underwent operation. Each case was blindly reviewed for the SLIC and severity scale by 3 different observers by two times with 4 weeks interval with randomly allocated. The compared axis was the injury morphology score, the disco-ligamentous complex score, the neurological status score and total SLIC score; the neurological status score was derived from the review of medical record. The kappa value was used for the statistical analysis. RESULTS: Interobserver agreement of SLIC and severity scale was substantial agreement in the score of injury morphology [intraclass correlation (ICC)=0.603] and total SLIC and severity sacle (ICC value=0.775), but was fair agreement in the disco-ligamentous complex score (ICC value=0.304). Intraobserver agreements were almost perfect agreement in whole scales with ICC of 0.974 in a spine surgeon, 0.948 in a resident of neurosurgery, and 0.963 in a neuro-radiologist. CONCLUSION: The SLIC and severity scale is comprehensive and easily applicable tool in spine injured patient. Moreover, it is very useful tool to communicate among spine surgeons, residents of neurosurgery and neuro-radiologists with sufficient reproducibility.

Accuracy and Safety in Pedicle Screw Placement in the Thoracic and Lumbar Spines : Comparison Study between Conventional C-Arm Fluoroscopy and Navigation Coupled with O-Arm(R) Guided Methods

OBJECTIVE: The authors performed a retrospective study to assess the accuracy and clinical benefits of a navigation coupled with O-arm(R) system guided method in the thoracic and lumbar spines by comparing with a C-arm fluoroscopy-guided method. METHODS: Under the navigation guidance, 106 pedicle screws inserted from T7 to S1 in 24 patients, and using the fluoroscopy guidance, 204 pedicle screws from T5 to S1 in 45 patients. The position of screws within the pedicle was classified into four groups, from grade 0 (no violation cortex) to 3 (more than 4 mm violation). The location of violated pedicle cortex was also assessed. Intra-operative parameters including time required for preparation of screwing procedure, times for screwing and the number of X-ray shot were assessed in each group. RESULTS: Grade 0 was observed in 186 (91.2%) screws of the fluoroscopy-guided group, and 99 (93.4%) of the navigation-guided group. Mean time required for inserting a screw was 3.8 minutes in the fluoroscopy-guided group, and 4.5 minutes in the navigation-guided group. Mean time required for preparation of screw placement was 4 minutes in the fluoroscopy-guided group, and 19 minutes in the navigation-guided group. The fluoroscopy-guided group required mean 8.9 times of X-ray shot for each screw placement. CONCLUSION: The screw placement under the navigation-guidance coupled with O-arm(R) system appears to be more accurate and safer than that under the fluoroscopy guidance, although the preparation and screwing time for the navigation-guided surgery is longer than that for the fluoroscopy-guided surgery.

Sub-axial cervical spine injuries: Modified Stellerman's algorithm.

BACKGROUND: Global fusion is recommended in sub-axial cervical spine injuries with retrolisthesis, translation rotation injuries associated with end plate or tear drop fractures. We propose a modification of Stellerman's algorithm which we have used where in patients are primarily treated via anterior decompression and fixation. Global fusion was done only in cases where post-decompression traction does not achieve reduction in cases with locked facets. MATERIALS AND METHODS: Two hundred and thirty consecutive patients with sub-axial cervical spine injuries were studied in a prospective trial over a 7 year period. Seven cases with posterior compression alone were not subjected to our protocol. Of the other 223 cases, 191 cases who on radiological evaluation needed surgery were initially approached anteriorly. Decompression was effected through a corpectomy in 14 cases and a single or multiple level disc excisions were performed in the others. Cases with cervical listhesis (n=36) where on table reduction could not be achieved following decompression were subjected to progressive skeletal traction for 48 h. Posterior facetectomy and global fixation was done for patients in whom reduction could not be achieved despite post-decompression traction (n=11). RESULTS: Of the 223 cases, 20 cases were managed conservatively, 12 cases expired pre-operatively, and the remaining 191 cases needed surgical intervention. Out of the 154 cases of distraction/rotation/translation injuries on table reduction could be achieved in 118 cases (76.6%). Thirty-six patients had locked facets (23 cases were bifacetal, 13 cases unifacetal) and of these 36 cases reduction could be achieved with post-anterior decompression traction in 25 patients (16.2%); however, only 11 cases (7.1%)-8 bifacetal and 3 unifacetal dislocations-needed posterior facetectomy and global fusion. One hundred and forty-three patients were followed up for a minimum period of 6 months. One hundred and twenty-six patients showed evidence of complete fusion (88.1%) while the remaining 17 (11.8) showed evidence of partial fusion. There were no signs of instability on clinical and radiological evaluation in any of the cases. Reduction of graft height was noted in 18 patients (12.5%). There were eight cases of immediate postoperative mortality and two cases of delayed mortality in our series of cases. CONCLUSION: We feel that on table decompression and reduction followed by anterior stabilization can be used as the initial surgical approach to manage most types of cervical injuries. In rotation/translational cases where reduction cannot be achieved, monitored cervical traction on the decompressed spine can safely achieve reduction and hence avoid the need for a posterior facetectomy in a large percentage of cases.