Adsorptive removal of Pb(II) ions from aqueous effluents using O-carboxymethyl chitosan Schiff base-sugarcane bagasse microbeads.

In this study, a novel and cost-effective approach was employed to prepare an effective Pb(II) adsorbent. We synthesized highly porous CMCSB-SCB microbeads with multiple active binding sites by combining carboxymethylated chitosan Schiff base (CMCSB) and sugarcane bagasse (SCB). These microbeads were structurally and morphologically characterized using various physical, analytical, and microscopic techniques. The SEM image and N2-adsorption analysis of CMCSB-SCB revealed a highly porous structure with irregularly shaped voids and interconnected pores. The CMCSB-SCB microbeads demonstrated an impressive aqueous Pb(II) adsorption capacity, reaching a maximum of 318.21 mg/g, under identified optimal conditions: pH 4.5, 15 mg microbeads dosage, 30 min contact time, and Pb(II) initial concentration (350 mg/L). The successful adsorption of Pb(II) onto CMCSB-SCB beads was validated using FTIR, EDX, and XPS techniques. Furthermore, the experimental data fitting indicated a good agreement with the Langmuir model (R2 = 0.99633), whereas the adsorption kinetics aligned well with the pseudo-second-order model (R2 = 0.99978). The study also identified the Pb(II) adsorption mechanism by CMCSB-SCB microbeads as monolayer chemisorption.

Mealybug Population Dynamics: A Comparative Analysis of Sampling Methods for Saccharicoccus sacchari and Heliococcus summervillei in Sugarcane (Saccharum sp. Hybrids).

This research is focused on a comparative field-based study of the population dynamics and sampling methods of two mealybug species, Saccharicoccus sacchari (Cockerell, 1895) (Hemiptera: Coccomorpha, Pseudococcidae) and Heliococcus summervillei (Brookes, 1978) (Hemiptera: Coccomorpha, Pseudococcidae), in sugarcane (Saccharum sp. hybrids) (f. Poaceae) over consecutive growing seasons. The research monitored and compared the above- and belowground populations and seasonal abundance of these two mealybug species in sugarcane fields in Far North Queensland, with non-destructive sampling techniques of yellow sticky traps, pan traps, and stem traps, and destructive sampling of the whole leaf and whole plant. The results indicated that S. sacchari (n = 29,137) was more abundant and detected throughout the growing season, with population peaks in the mid-season, while H. summervillei (n = 2706) showed peaks of the early-season activity. S. sacchari is primarily located on sugarcane stems and roots, compared to H. summervillei, which is located on leaves and roots. The whole-leaf collection and stem trap were the most effective sampling techniques for quantification of H. summervillei and S. sacchari, respectively. This study enhanced the understanding of S. sacchari and the first-ever record of H. summervillei on sugarcane in Australia and will contribute to the development of more effective pest management strategies.

Genome-Wide Analysis of the Auxin/Indoleacetic Acid (Aux/IAA) Gene Family in Autopolyploid Sugarcane (Saccharum spontaneum).

The auxin/indoleacetic acid (Aux/IAA) family plays a central role in regulating gene expression during auxin signal transduction. Nonetheless, there is limited knowledge regarding this gene family in sugarcane. In this study, 92 members of the IAA family were identified in Saccharum spontaneum, distributed on 32 chromosomes, and classified into three clusters based on phylogeny and motif compositions. Segmental duplication and recombination events contributed largely to the expansion of this superfamily. Additionally, cis-acting elements in the promoters of SsIAAs involved in plant hormone regulation and stress responsiveness were predicted. Transcriptomics data revealed that most SsIAA expressions were significantly higher in stems and basal parts of leaves, and at nighttime, suggesting that these genes might be involved in sugar transport. QRT-PCR assays confirmed that cold and salt stress significantly induced four and five SsIAAs, respectively. GFP-subcellular localization showed that SsIAA23 and SsIAA12a were localized in the nucleus, consistent with the results of bioinformatics analysis. In conclusion, to a certain extent, the functional redundancy of family members caused by the expansion of the sugarcane IAA gene family is related to stress resistance and regeneration of sugarcane as a perennial crop. This study reveals the gene evolution and function of the SsIAA gene family in sugarcane, laying the foundation for further research on its mode of action.

Determining Factors and Economic Injury Levels for Sphenophorus levis for Chemical and Biological Control in Irrigated and Non-irrigated Sugarcane Crops.

Globally, people use sugarcane (Saccharum officinarum) to produce sugar and ethanol. Rainfed or irrigated sugarcane agricultural systems are available. Among the pests affecting this crop, the weevil Sphenophorus levis, Vaurie 1978 (Coleoptera: Curculionidae), is increasingly becoming a significant threat in southern South America. Sphenophorus levis populations are controlled using chemical or biological measures. Control decisions hinge upon the economic injury level (EIL). The EIL delineates the pest density that results in financial losses for producers. This study aims to determine the EIL for S. levis, considering the factors favoring this insect pest and chemical and biological control methods in rainfed and irrigated systems. The intensity of S. levis attacks was monitored in commercial sugarcane plantations over four years in João Pinheiro, Minas Gerais, Brazil. Sampling occurred in a 50 × 50 × 30-cm-deep trench dug in the soil surrounding the sugarcane clump. The total number of stumps in the clump, including those attacked by S. levis, was tallied. The EILs for this pest were 5.93% and 4.85% of targeted stumps for chemical control in rainfed and irrigated crops, respectively. Biological control in sugarcane plots resulted in an EIL of 4.15% and 3.40% for stumps attacked in rainfed and irrigated crops, respectively. Pest attacks were more severe during rainy years and in older sugarcane crops. The EIL values determined in this study could inform integrated pest management programs for sugarcane crops.

Natural Occurrence of Fungi and Aflatoxins Associated Sugarcane Plant and Sugarcane Juice and Their Control.

Sugarcane is one of the most important crops in the world. It is also considered the most popular fresh juice in Egypt. The sugar content of the sugarcane stem represents the main source of fungal growth. This study aimed to investigate the natural co-occurrence of fungi in sugarcane plants and juice, test of aflatoxins production by aflatoxigenic fungi, and improve the quality of sugarcane juice. The obtained results indicated a notable decrease in all physical parameters of the naturally infected sugarcane plants. Isolation of fungi from sugarcane plant and juice from three localities revealed that the highest mean fungal count was recorded in sugarcane rootlets (173.55 cfu/cm), followed by sugarcane stem (94.88 cfu/cm), while sugarcane juice had the least mean fungal count (24.33 cfu/mL). The frequency of the isolated fungi associated with sugarcane plant yielded 781 fungal isolates for rootlets, 427 fungal isolates for stems, and 219 fungal isolates for juice. Four isolates of Aspergillus parasiticus were aflatoxins producers. Higher aflatoxin quantity (1434.92 ng/mL) was produced by A. parasiticus (isolate No. 21) from sugarcane stem, while A. parasiticus (isolate No. 5) from sugarcane juice was less aflatoxins producer (276.95 ng/mL). On the other hand, lemon juice showed a significant reduction effect on the fungal count of peeled and non-peeled sugarcane juice. In which the highest reduction percent of the fungal count was recorded with 20% conc. of lemon on peeled sugarcane juice (36.04%).The obtained results concluded that lemon juice was found to decrease the fungal contaminants and improve the quality of sugarcane juice.

Aqueous Pretreatment of Lignocellulosic Biomass for Binderless Material Production: Influence of Twin-Screw Extrusion Configuration and Liquid-to-Solid Ratio.

This study was carried out to investigate the continuous aqueous pretreatment of sugarcane bagasse (SCB) through twin-screw extrusion for a new integrated full valorization, where the solid residue (extrudate) was used for the production of bio-based materials by thermocompression and the filtrate for the production of high-value-added molecules. Two configurations, with and without a filtration module, were tested and the influence of the SCB composition and structure on the properties of the materials were determined. The impact of the liquid-to-solid (L/S) ratio was studied (0.65-6.00) in relation to the material properties and the biomolecule extraction yield in the filtrate (with the filtration configuration). An L/S ratio of at least 1.25 was required to obtain a liquid filtrate, and increasing the L/S ratio to 2 increased the extraction yield to 11.5 g/kg of the inlet SCB. The extrudate obtained without filtration yielded materials with properties equivalent to those obtained with filtration for L/S ratios of at least 1.25. Since the molecule extraction process was limited, a configuration without filtration would make it possible to reduce water consumption in the process while obtaining high material properties. Under the filtration configuration, an L/S ratio of 2 was the best tradeoff between water consumption, extraction yield, and the material properties, which included 1485 kg/m3 density, 6.2 GPa flexural modulus, 51.2 MPa flexural strength, and a water absorption (WA) and thickness swelling (TS) of 37% and 44%, respectively, after 24 h of water immersion. The aqueous pretreatment by twin-screw extrusion allowed for the overall valorization of SCB, resulting in materials with significantly improved properties compared to those obtained with raw SCB due to fiber deconstruction.

Genetic Engineering for Enhancing Sugarcane Tolerance to Biotic and Abiotic Stresses.

Sugarcane, a vital cash crop, contributes significantly to the world's sugar supply and raw materials for biofuel production, playing a significant role in the global sugar industry. However, sustainable productivity is severely hampered by biotic and abiotic stressors. Genetic engineering has been used to transfer useful genes into sugarcane plants to improve desirable traits and has emerged as a basic and applied research method to maintain growth and productivity under different adverse environmental conditions. However, the use of transgenic approaches remains contentious and requires rigorous experimental methods to address biosafety challenges. Clustered regularly interspaced short palindromic repeat (CRISPR) mediated genome editing technology is growing rapidly and may revolutionize sugarcane production. This review aims to explore innovative genetic engineering techniques and their successful application in developing sugarcane cultivars with enhanced resistance to biotic and abiotic stresses to produce superior sugarcane cultivars.

The impact of credit accessibility and information communication technology on the income of small-scale sugarcane farmers in Ndwedwe Local Municipality, KwaZulu-Natal Province, South Africa.

Introduction: Access to credit and information and communication technology (ICT) plays a pivotal role in enhancing the practices of small-scale sugarcane farmers, impacting their financial, social, and economic wellbeing. However, many small-scale farmers need help accessing these resources, thereby affecting their ability to generate sustainable income. This study aimed to assess the factors influencing the adoption of ICT and access to credit and their subsequent impact on small-scale farmers' income. Methods: Employing a multistage sampling technique, 300 small-scale farmers were selected as participants in the study. The recursive bivariate probit regression model was used to assess the factors affecting adoption ICT and a selectivity-corrected ordinary least square regression model was utilized to estimate the synergistic effect of ICT adoption and access to credit on the income of small-scale sugarcane farmers. Results and discussion: The findings revealed that approximately 77% of small-scale farmers had access to credit, while more than 80% had adopted ICT. The results derived from the recursive bivariate probit (RBP) regression model indicated that access to credit, education, and extension support positively and significantly influenced the adoption of ICT. Conversely, marital status and non-farm income exhibited a negative and significant influence on the adoption of ICT. Gender and marital status were positively and significantly associated with access to credit, whereas age, education, and non-farm income showed a negative and significant relationship on access to credit. Subsequently, a selectivity-corrected ordinary least square regression model analysis revealed that factors such as gender, marital status, extension, government support, and transportation costs positively and significantly influenced farmer's income. In contrast, education, employment status, and non-farm income exhibited a negative and significant influence on income. Conclusion and recommendations: The study concludes that socio-demographic factors, such as gender, marital status, extension support, government support, and transportation costs, positively contribute to farmers' income. Small-scale sugarcane farmer involvement in other non-farm activities is associated with reduced farm income. This implies that farmers' livelihoods options are reduced as they can only focus on sugarcane development as a source of income. There is a pressing need to educate small-scale farmers on ICT and provide them with access to agricultural credit. Additionally, extension workers should offer advisory support to small-scale farmers requiring assistance in accessing agricultural credit. There is a need to train sugarcane farmers on different agricultural income generating activities to reduce their over-reliance on sugarcane development. By addressing the identified socio-demographic factors and implementing targeted policy interventions, stakeholders can foster an enabling environment for small-scale farmers to thrive, ultimately contributing to the sustainable development of the sugarcane sector and the broader agricultural landscape in South Africa.

Optimization using central composite design for continuous absorption of CO2 gas with green sodium silicate in a packed bed column.

If absolutely nothing is taken to reduce carbon dioxide (CO2) emissions, atmospheric concentrations of carbon dioxide will rise to 550 parts per million by 2050, which will have disastrous effects on the world's climate and food production. An apparatus has been designed and setup to convert CO2 into a useful and vital product which was silica. The effect of different experimental factors on the compositions by weight percent of SiO2 and Na2CO3 were studied including the CO2 gas flow rate (1.037, 1.648 and 2.26 L/min), initial concentration of sodium silicate (Na2SiO3) solution (5, 7.5 and 10 %wt) and the packing size (15.95, 20.175, and 24.4 mm). An optimization process was performed using the Design Expert software program to achieve the optimum experimental conditions at which the maximum weight percent of SiO2 (main product), the minimum weight percent of (Na2CO3) (side product) and the minimum reaction time were determined. From the optimization process, the maximum weight percent of SiO2 (25.63 %), the minimum weight percent of (Na2CO3) (9.62 %) and the minimum reaction time (7.59 min) were achieved at the following optimum experimental conditions of CO2 gas flow rate = 1.648 L/min, packing size = 24.4 mm and initial concentration of sodium silicate solution = 10 %wt.

Production of Nanocellulose from Sugarcane Bagasse and Development of Nanocellulose Conjugated with Polylysine for Fumonisin B1 Toxicity Absorption.

The present study aimed to extract nanocellulose (NC) from sugarcane bagasse agricultural waste through a chemical method (sulfuric acid hydrolysis and ultrasonication). Subsequently, the nanocellulose product was conjugated with polylysine (NC-PL) and assessed for its efficacy in reducing the toxicity of Fumonisin B1 (FB1), a mycotoxin produced by fungi commonly found in corn, wheat, and other grains. Experimental results confirmed the successful conjugation of NC and PL, as evidenced by FTIR peaks at 1635 and 1625 cm-1 indicating amide I and amide II vibrations in polylysine (PL). SEM analysis revealed a larger size due to PL coating, consistent with DLS results showing the increased size and positive charge (38.0 mV) on the NC-PL surface. Moreover, the effect of FB1 adsorption by NC and NC-PL was evaluated at various concentrations (0-200,000 µg/mL). NC-PL demonstrated the ability to adsorb FB1 at concentrations of 2000, 20,000, and 200,000 µg/mL, with adsorption efficiencies of 94.4-100%. Human hepatocellular carcinoma (HepG2) cells were utilized to assess NC and NC-PL cytotoxic effects. This result is a preliminary step towards standardizing results for future studies on their application as novel FB1 binders in food, food packaging, and functional feeds.

Valorization of Sugarcane Bagasse for Co-Production of Poly(3-hydroxybutyrate) and Bacteriocin Using Bacillus cereus Strain S356.

Poly(3-hydroxybutyrate) (P(3HB)) is an attractive biodegradable plastic alternative to petroleum-based plastic. However, the cost of microbial-based bioplastic production mainly lies in the cultivation medium. In this study, we screened the isolates capable of synthesizing P(3HB) using sugarcane bagasse (SCB) waste as a carbon source from 79 Bacillus isolates that had previously shown P(3HB) production using a commercial medium. The results revealed that isolate S356, identified as Bacillus cereus using 16S rDNA and gyrB gene analysis, had the highest P(3HB) accumulation. The highest P(3HB) yield (5.16 g/L, 85.3% of dry cell weight) was achieved by cultivating B. cereus S356 in an optimal medium with 1.5% total reducing sugar with SCB hydrolysate as the carbon source and 0.25% yeast extract as the nitrogen source. Transmission electron microscopy analysis showed the accumulation of approximately 3-5 P(3HB) granules in each B. cereus S356 cell. Proton nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy analyses confirmed that the polymer extracted from B. cereus S356 was P(3HB). Notably, during cultivation for P(3HB) plastic production, B. cereus S356 also secreted bacteriocin, which had high antibacterial activity against the same species (Bacillus cereus). Overall, this work demonstrated the possibility of co-producing eco-friendly biodegradable plastic P(3HB) and bacteriocin from renewable resources using the potential of B. cereus S356.

Reflecting on the Plantationocene: the political economy of sugarcane plantations in Guangxi, China.

This paper reflects on the concept of the Plantationocene through an analysis of sugarcane plantations in Guangxi province, China. It argues that although these plantations are owned and operated by local villagers, they are de facto controlled by corporations, and subject to state intervention through a 'zoning scheme'. They are constructed and operated according to the same logic as other plantations all over the world, namely, the logic of extraction based on cheap land and labor. By demonstrating that plantations are not necessarily large-scale and do not always entail the alienation of land and labor, this paper hopes to empirically broaden the concept of the Plantationocene and to highlight the extractive nature of and the power relations around plantations.

Endosaccharibacter trunci gen. nov., sp. nov. and Rhizosaccharibacter radicis gen. nov., sp. nov., two novel bacteria of the family Acetobacteraceae isolated from sugarcane.

Two novel endophytic bacterial strains, designated KSS8T and KSS12T, were isolated from the stems and roots of sugarcane, respectively, collected in Nakhon Ratchasima, Thailand. They were Gram-stain-negative, aerobic, and rod-shaped. The strain KSS8T was a motile bacterium with a subpolar flagellum, while the strain KSS12T was non-motile. Strains KSS8T and KSS12T were closely related to Lichenicola cladoniae PAMC 26569T (97.3 and 95.6 %, respectively) and Lichenicoccus roseus KEBCLARHB70RT (97.2 and 95.8 %, respectively) based on the similarity on their 16S rRNA gene sequence. This similarity corresponded to their phylogenomic positions within the evolutionary radiation of the family Acetobacteraceae. The average nucleotide identities and digital DNA-DNA hybridization values between the genome sequences of the two strains and other genera were significantly lower than the defined threshold values of 95-96 % and 70 %, respectively, which are used for the delineation of prokaryotic species. Both strains contained summed feature 8 (C18:1 ω7c and/or C18:1 ω6c), C16:0, C19:0 cyclo ω8c, C18:0, and C18:1 2OH as the predominant cellular fatty acids, but C18:3 ω6c (6, 9, 12) were found only in strain KSS12T. Based on phenotypic, chemotaxonomic, phylogenetic, and genomic analyses, these strains clearly represented two novel genera within the family Acetobacteraceae, for which the name Endosaccharibacter gen. nov., with the type species Endosaccharibacter trunci sp. nov. (type strain, KSS8T = TBRC 14669T = NBRC 115232T = KCTC 92115T = LMG 32414T) and the name Rhizosacchari bacter gen. nov., with the type species Rhizosaccharibacter radicis sp. nov. (type strain, KSS12T = TBRC 13066T = NBRC 114898T = KCTC 82433T = LMG 32137T) are proposed.

GGE biplot analysis for cane yield and sugar yield in advanced clones of sugarcane (Saccharum sp. complex).

The present investigation was taken up to study the G × E interaction and stability in 14 sugarcane clones during 2020-2021 and 2021-2022 at four different locations namely Pantnagar, Kashipur, Dhanauri (Haridwar), and Dhakrani (Dehradun) for cane yield (CY) and sugar yield (SY) at the 10-month and 12-month stages. The research aimed to identify stable, high-yielding sugarcane clones adaptable to diverse environmental conditions, enhancing productivity and profitability for farmers in Uttarakhand, India. The combined ANOVA revealed significant differences among the clones (22.20% to 29.54% variation), environments (35% to 39.62% variation), and their interactions (19.91% to 24.16% variation) for CY and SY at both stages. To analyze the stability of genotypes and G × E interactions, the GGE biplot method was employed. The first two PCs explained 77.94% for CY, 74.39% for SY at the 10-month stage, and 81.01% for SY at 12-month stage of the total variation of the GGE model. The GGE biplots revealed that for CY, the mega-environment exhibited CoPant 16222 and CoPant 16223 as the winning genotypes. For SY at the 10-month stage, CoPant 17221 and CoPant 16222 were the best clones in two different mega-environments, while at the 12-month stage, the mega-environment showed CoPant 16222 and CoPant 16223 as the winning genotypes. Dehradun (2020) and Kashipur (2020) were identified as the best test environments for selecting widely and specifically adapted genotypes, respectively, for CY and SY at the 10-month as well as 12-month stages. In a nutshell, GGE biplot analysis identified the best-performing sugarcane clones and best test environments in Uttarakhand, India. Clone CoPant 16222 showed high mean performance and stability for cane and sugar yield, making it suitable for recommendation to farmers.

Recent developments in sugarcane bagasse fibre-based adsorbent and their potential industrial applications: A review.

In recent years, there has been an increase in research devoted to the advancement of cellulose and nanocellulose-based materials, which are advantageous due to their renewable nature, strength, rigidity, and environmental friendliness. This exploration complies with the fundamental tenets of environmental stewardship and sustainability. An area of industrial biotechnology where cellulosic agricultural residues have the potential to be economically utilized is through the conversion of such residues; sugarcane bagasse is currently leading this charge. SCB, a plentiful fibrous byproduct produced during the sugarcane industry's operations, has historically been utilized in various sectors, including producing paper, animal feed, enzymes, biofuel conversion, and biomedical applications. Significantly, SCB comprises a considerable amount of cellulose, approximately 40 % to 50 %, rendering it a valuable source of cellulose fibre for fabricating cellulose nanocrystals. This review sheds light on the significant advances in surface modification techniques, encompassing physical, chemical, and biological treatments, that enhance sugarcane bagasse fibres' adsorption capacity and selectivity. Furthermore, the paper investigates the specific advancements related to the augmentation of sugarcane bagasse fibres' efficacy in adsorbing a wide range of pollutants. These pollutants span a spectrum that includes heavy metals, dyes, organic pollutants, and emerging contaminants. The discussion provides a comprehensive overview of the targeted removal processes facilitated by applying modified fibres. The unique structural and chemical properties inherent in sugarcane bagasse fibres and their widespread availability position them as highly suitable adsorbents for various pollutants. This convergence of attributes underscores the potential of sugarcane bagasse fibres in addressing environmental challenges and promoting sustainable solutions across multiple industries.

Machine learning for the adsorptive removal of ciprofloxacin using sugarcane bagasse as a low-cost biosorbent: comparison of analytic, mechanistic, and neural network modeling.

Contamination with traces of pharmaceutical compounds, such as ciprofloxacin, has prompted interest in their removal via low-cost, efficient biomass-based adsorption. In this study, classical models, a mechanistic model, and a neural network model were evaluated for predicting ciprofloxacin breakthrough curves in both laboratory- and pilot scales. For the laboratory-scale (d = 2.2 cm, Co = 5 mg/L, Q = 7 mL/min, T = 18 °C) and pilot-scale (D = 4.4 cm, Co = 5 mg/L, Q = 28 mL/min, T = 18 °C) setups, the experimental adsorption capacities were 2.19 and 2.53 mg/g, respectively. The mechanistic model reproduced the breakthrough data with high accuracy on both scales (R2 > 0.4 and X2 < 0.15), and its fit was higher than conventional analytical models, namely the Clark, Modified Dose-Response, and Bohart-Adams models. The neural network model showed the highest level of agreement between predicted and experimental data with values of R2 = 0.993, X2 = 0.0032 (pilot-scale) and R2 = 0.986, X2 = 0.0022 (laboratory-scale). This study demonstrates that machine learning algorithms exhibit great potential for predicting the liquid adsorption of emerging pollutants in fixed bed.

Transcriptomic Profiling of Sugarcane White Leaf (SCWL) Canes during Maturation Phase.

Sugarcane white leaf (SCWL) disease, caused by Candidatus Phytoplasma sacchari, results in the most damage to sugarcane plantations. Some SCWL canes can grow unnoticed through the maturation phase, subsequently resulting in an overall low sugar yield, or they can be used accidentally as seed canes. In this work, 12-month-old SCWL and asymptomatic canes growing in the same field were investigated. An abundance of phytoplasma in SCWL canes affected growth and sugar content as well as alterations of transcriptomic profiles corresponding to several pathways that responded to the infection. Suppression of photosynthesis, porphyrin and chlorophyll metabolism, coupled with an increase in the expression of chlorophyllase, contributed to the reduction in chlorophyll levels and photosynthesis. Blockage of sucrose transport plausibly occurred due to the expression of sugar transporters in leaves but suppression in stalks, resulting in low sugar content in canes. Increased expression of genes associated with MAPK cascades, plant hormone signaling transduction, callose plug formation, the phenylpropanoid pathway, and calcium cascades positively promoted defense mechanisms against phytoplasma colonization by an accumulation of lignin and calcium in response to plant immunity. Significant downregulation of CPK plausibly results in a reduction in antioxidant enzymes and likely facilitates pathogen invasion, while expression of sesquiterpene biosynthesis possibly attracts the insect vectors for transmission, thereby enabling the spread of phytoplasma. Moreover, downregulation of flavonoid biosynthesis potentially intensifies the symptoms of SCWL upon challenge by phytoplasma. These SCWL sugarcane transcriptomic profiles describe the first comprehensive sugarcane-phytoplasma interaction during the harvesting stage. Understanding molecular mechanisms will allow for sustainable management and the prevention of SCWL disease-a crucial benefit to the sugar industry.

Extraction of Nanocellulose from the Residue of Sugarcane Bagasse Fiber for Anti-Staphylococcus aureus (S. aureus) Application.

Nanocellulose contains a large number of hydroxyl groups that can be used to modify its surface due to its structure. Owing to its appealing features, such as high strength, great stiffness, and high surface area, nanocellulose is currently gaining popularity in research and industry. The extraction of nanocellulose from the leftover bagasse fiber from sugarcane production by alkaline and acid treatment was successful in this study, with a production yield of 55.6%. The FTIR and XPS results demonstrated a difference in the functional and chemical composition of untreated sugarcane bagasse and extracted nanocellulose. SEM imaging was used to examined the size of the nanocellulose with ImageJ software v1.8.0. TGA, DTG, and XRD analyses were also performed to demonstrate the successful extraction of nanocellulose in terms of its morphology, thermal stability, and crystal structure before and after extraction. The anti-S. aureus activity of the extracted nanocellulose was discovered by using an OD600 test and a colony counting method, and an inhibitory rate of 53.12% was achieved. According to the results, nanocellulose produced from residual sugarcane bagasse could be employed as an antibacterial agent.

Identification of male sterility-related genes in Saccharum officinarum and Saccharum spontaneum.

KEY MESSAGE: Candidate male sterility genes were identified in sugarcane, which interacts with kinase-related proteins, transcription factors, and plant hormone signaling pathways to regulate stamen and anther development. Saccharum officinarum is a cultivated sugarcane species that its predominant feature is high sucrose content in stems. Flowering is necessary for breeding new cultivars but will terminate plant growth and reduce sugar yield. The wild sugarcane species Saccharum spontaneum has robust and viable pollen, whereas most S. officinarum accessions are male sterile, which is a desirable trait of a maternal parent in sugarcane breeding. To study male sterility and related regulatory pathways in sugarcane, we carried out RNAseq using flowers in different developmental stages between male-sterile S. officinarum accession 'LA Purple' and fertile S. spontaneum accession 'SES208'. Gene expression profiles were used to detect how genes are differentially expressed between male sterile and fertile flowers and to identify candidate genes for male sterility. Weighted gene correlation networks analysis (WGCNA) was conducted to investigate the regulatory networks. Transcriptomic analyses showed that 988 genes and 2888 alleles were differentially expressed in S. officinarum compared to S. spontaneum. Ten differentially expressed genes and thirty alleles were identified as candidate genes and alleles for male sterility in sugarcane. The gene Sspon.03G0007630 and two alleles of the gene Sspon.08G0002270, Sspon.08G0002270-2B and Sspon.08G0014700-1A, were involved in the early stamen or carpel development stages, while the remaining genes were classified into the post-meiosis stage. Gibberellin, auxin, and jasmonic acid signaling pathways are involved in the stamen development in sugarcane. The results expanded our knowledge of male sterility-related genes in sugarcane and generated genomic resources to facilitate the selection of ideal maternal parents to improve breeding efficiency.

Whole-genome sequencing of a worldwide collection of sugarcane cultivars (Saccharum spp.) reveals the genetic basis of cultivar improvement.

Sugarcane is the main source of sugar worldwide, and 80% of the sucrose production comes from sugarcane. However, the genetic differentiation and basis of agronomic traits remain obscure. Here, we sequenced the whole-genome of 219 elite worldwide sugarcane cultivar accessions. A total of approximately 6 million high-quality genome-wide single nucleotide polymorphisms (SNPs) were detected. A genome-wide association study identified a total of 2198 SNPs that were significantly associated with sucrose content, stalk number, plant height, stalk diameter, cane yield, and sugar yield. We observed homozygous tendency of favor alleles of these loci, and over 80% of cultivar accessions carried the favor alleles of the SNPs or haplotypes associated with sucrose content. Gene introgression analysis showed that the number of chromosome segments from Saccharum spontaneum decreased with the breeding time of cultivars, while those from S. officinarum increased in recent cultivars. A series of selection signatures were identified in sugarcane improvement procession, of which 104 were simultaneously associated with agronomic traits and 45 of them were mainly associated with sucrose content. We further proposed that as per sugarcane transgenic experiments, ShN/AINV3.1 plays a positive role in increasing stalk number, plant height, and stalk diameter. These findings provide comprehensive resources for understanding the genetic basis of agronomic traits and will be beneficial to germplasm innovation, screening molecular markers, and future sugarcane cultivar improvement.