Less Frequently Used Growth Regulators in Plant Tissue Culture.

Plant growth regulators are routinely added to in vitro culture media to foster the growth and differentiation of the cells, tissues, and organs. However, while the literature on usage of the more common auxins, cytokinins, gibberellins, abscisic acid, and ethylene is vast, other compounds that also have shown a growth-regulating activity have not been studied as frequently. Such substances are also capable of modulating the responses of plant cells and tissues in vitro by regulating their growth, differentiation, and regeneration competence, but also by enhancing their responses toward biotic and abiotic stress agents and improving the production of secondary metabolites of interest. This chapter will discuss the in vitro effects of several of such less frequently added plant growth regulators, including brassinosteroids (BRS), strigolactones (SLs), phytosulfokines (PSKs), methyl jasmonate, salicylic acid (SA), sodium nitroprusside (SNP), hydrogen sulfite, various plant growth retardants and inhibitors (e.g., ancymidol, uniconazole, flurprimidol, paclobutrazol), and polyamines.

Iron (hydr)oxides-induced activation of sulfite for contaminants degradation: The critical role of structural Fe(III).

Iron-based sulfite (S(IV)) activation has emerged as a novel strategy to generate sulfate radicals (SO4•-) for contaminants degradation. However, numerous studies focused on dissolved iron-induced homogeneous activation processes while the potential of structural Fe(III) remains unclear. In this study, five iron (hydr)oxide soil minerals (FeOx) including ferrihydrite, schwertmannite, lepidocrocite, goethite and hematite, were successfully employed as sources of structural Fe(III) for S(IV) activation. Results showed that the catalytical ability of structural Fe(III) primarily depended on the crystallinity of FeOx instead of their specific surface area and particle size, with ferrihydrite and schwertmannite being the most active. Furthermore, in-situ ATR-FTIR spectroscopy and 2D-COS analysis revealed that HSO3- was initially adsorbed on FeO6 octahedrons of FeOx via monodentate inner-sphere complexation, ultimately oxidized into SO42- which was then re-adsorbed via outer-sphere complexation. During this process, strong oxidizing SO4•- and •OH were formed for pollutants degradation, confirmed by radical quenching experiments and electron spin resonance. Moreover, FeOx/S(IV) system exhibited superior applicability with respect to recycling test, real waters and twenty-six pollutants degradation. Eventually, plausible degradation pathways of three typical pollutants were proposed. This study highlights the feasibility of structural Fe(III)-containing soil minerals for S(IV) activation in wastewater treatment.

Riboflavin overproduction from diverse feedstocks with engineered Corynebacterium glutamicum.

Riboflavin overproduction by Corynebacterium glutamicum was achieved by screening synthetic operons, enabling fine-tuned expression of the riboflavin biosynthetic genes ribGCAH. The synthetic operons were designed by means of predicted translational initiation rates of each open reading frame, with the best-performing selection enabling riboflavin overproduction without negatively affecting cell growth. Overexpression of the fructose-1,6-bisphosphatase (fbp) and 5-phosphoribosyl 1-pyrophosphate aminotransferase (purF) encoding genes was then done to redirect the metabolic flux towards the riboflavin precursors. The resulting strain produced 8.3 g/L of riboflavin in glucose-based fed-batch fermentations, which is the highest reported riboflavin titer with C. glutamicum. Further genetic engineering enabled both xylose and mannitol utilization by C. glutamicum, and we demonstrated riboflavin overproduction with the xylose-rich feedstocks rice husk hydrolysate and spent sulfite liquor, and the mannitol-rich feedstock brown seaweed hydrolysate. Remarkably, rice husk hydrolysate provided 30% higher riboflavin yields compared to glucose in the bioreactors. .

Dimerization of assimilatory NADPH-dependent sulfite reductase reveals elements for diflavin reductase binding at a minimal interface.

Escherichia coli NADPH-dependent assimilatory sulfite reductase is responsible for fixing sulfur for incorporation into sulfur-containing biomolecules. The oxidoreductase is composed of two subunits, an NADPH, FMN, and FAD-binding diflavin reductase and an iron siroheme and Fe4S4-containing oxidase. How they interact has been an unknown for over 50 years because the complex is highly flexible, thus has been intransigent for traditional X-ray or cryo-EM structural analysis. Using a combination of the chameleon plunging system with a fluorinated lipid we overcame the challenge of preserving the minimal dimer between the subunits for high-resolution cryo-EM analysis. Here, we report the first structure of the complex between the reductase and oxidase, revealing how they interact in a minimal interface. Further, we determined the structural elements that discriminate between the pairing of a siroheme-containing oxidase with a diflavin reductase or a ferredoxin partner to channel the six electrons that reduce sulfite to sulfide.

Construction of a Colorimetric and Near-Infrared Ratiometric Fluorescent Sensor and Portable Sensing System for On-Site Quantitative Measurement of Sulfite in Food.

Sulfites play imperative roles in food crops and food products, serving as sulfur nutrients for food crops and as food additives in various foods. It is necessary to develop an effective method for the on-site quantification of sulfites in food samples. Here, 7-(diethylamino) quinoline is used as a fluorescent group and electron donor, alongside the pyridinium salt group as an electron acceptor and the C=C bond as the sulfite-specific recognition group. We present a novel fluorescent sensor based on a mechanism that modulates the efficiency of intramolecular charge transfer (ICT), CY, for on-site quantitative measurement of sulfite in food. The fluorescent sensor itself exhibited fluorescence in the near-infrared light (NIR) region, effectively minimizing the interference of background fluorescence in food samples. Upon exposure to sulfite, the sensor CY displayed a ratiometric fluorescence response (I447/I692) with a high sensitivity (LOD = 0.061 µM), enabling accurate quantitative measurements in complex food environments. Moreover, sensor CY also displayed a colorimetric response to sulfite, making sensor CY measure sulfite in both fluorescence and colorimetric dual-signal modes. Sensor CY has been utilized for quantitatively measuring sulfite in red wine and sugar with recoveries between 99.65% and 101.90%, and the RSD was below 4.0%. The sulfite concentrations in live cells and zebrafish were also monitored via fluorescence imaging. Moreover, the sulfite assimilated by lettuce leaves was monitored, and the results demonstrated that excessive sulfite in leaf tissue could lead to leaf tissue damage. In addition, the sulfate-transformed sulfite in lettuce stem tissue was tracked, providing valuable insights for evaluating sulfur nutrients in food crops. More importantly, to accomplish the on-site quantitative measurement of sulfite in food samples, a portable sensing system was prepared. Sensor CY and the portable sensing system were successfully used for the on-site quantitative measurement of sulfite in food.

A rapid near-infrared turn on fluorescence probe for the detection of sulfite in food and its application in biological imaging.

A near-infrared fluorescent "turn on" probe DTMI featuring simple skeleton was constructed easily. It undergoes a structure transformation from an A-π-A to a D-π-A framework towards SO32-. Besides, DTMI is capable of distinctive sensing sulfite with a fast response and a significant Stokes shift as well as with high sensitivity, excellent selectivity, long-term stability of fluorescence signals, and good anti-interference ability. The detection limit (LOD) of DTMI for sulfite within the linear concentration range of 0.5-10 µM is 27.39 nM. More importantly, DTMI has been favorably utilized for detecting sulfite in food samples such as red wine and vermicelli. Based on its low biotoxicity, DTMI has been successfully applied in imaging experiments involving HeLa cells, onion inner epidermal cells, and zebrafish. Therefore, the results show that the presented probe possesses potential sensing activity towards sulfite in complex biological system and food samples.

A highly sensitive ratiometric fluorescence probe for sensing and imaging sulfite in food samples and living cells.

In this work, a ratiometric and chromogenic fluorescent probe 1 was synthesized for the detection of SO32-. The probe 1 at PBS (10 mM, pH = 7.4) presented a marked emission band at 661 nm. Upon addition of SO32- ions, a highly emissive adduct with a marked fluorescence at 471 nm were obtained through a Michael addition. The probe 1 displayed a noticeable fluorescence ratiometric response with a large shift (190 nm) in emission wavelength. The probe can quantitatively detect SO32- with high specificity, fast response (within 130 s) as well as low detection limit (13 nM), and a large Stokes shift (139 nm). Fluorescence imaging of HeLa cells indicated that 1 could be used for monitoring the intrinsically generated intracellular SO32- in living cells by ratiometric fluorescence imaging. Furthermore, 1 could be application in real water and sugar samples with high sensitivity and good recoveries.

Synergistic enhancement of pulsed light-induced H2 photoproduction in Chlamydomonas cells by optimal sulfite concentration and light waveform.

Pulsed light illumination stands out as a noteworthy technique for photosynthetic H2 production, playing a crucial role in eliminating O2 and activating hydrogenase enzymes. However, further improvements are essential to make H2 photoproduction suitable for future commercial applications. In our study, we observed a distinct enhancement in pulsed light-induced H2 photoproduction in the unicellular green alga Chlamydomonas reinhardtii when treated with the optimal concentration of the mild O2 scavenger Na2SO3. This improvement was a result of reduced O2 content, increased hydrogenase enzyme activity, and suppressed H2-uptake activity. Furthermore, our findings indicate that exposing Na2SO3-treated C. reinhardtii to optimal light waveform continues to significantly boost pulsed light-induced H2 photoproduction, attributed to the alleviation of impaired photosystem II activity. Altogether, the combined application of optimal sulfite concentration and light waveform effectively enhances pulsed light-induced photosynthetic H2 production in the green alga C. reinhardtii.

Aerobic Se(IV) reducing bacteria and their reducing characteristics in estuarine sediment.

Microorganisms play a critical role in the biogeochemical cycling of selenium in natural ecosystems, particularly in reducing selenite (Se(IV)) to element selenium (Se(0)) which reduces its mobility and bioavailability. However, Se(IV)-reducing bacteria and their reducing characteristics in estuarine sediments remain inadequately understood. In this study, the reduction of Se(IV) was confirmed to be microbially driven through the cultivation of a mixture of estuarine sediment and Se(IV) under aerobic conditions. Community analysis indicates that Bacillus was primarily involved in the reduction of Se(IV). A strain with high salt tolerance (7.5 % NaCl) and Se(IV) resistance (up to 200 mM), Bacillus cereus SD1, was isolated from an estuarine sediment. The reduction of Se(IV) occurred concomitantly with the onset of microbial growth, and reduction capacity increased approximately 5-fold by adjusting the pH. In addition, Se(IV) reduction in Bacillus cereus SD1 was significantly inhibited by sulfite, and the key enzyme activity tests revealed the possible presence of a sulfite reductase-mediated Se(IV) reduction pathway. These research findings provide new insights into the bioreducing characteristics and the biogeochemical cycling of selenium in estuarine environments.

Untargeted metabolomics combined with vitro antioxidant to comprehensively evaluate the effect of sodium sulfite immersion on the holistic quality of mung bean sprouts.

Mung bean sprouts are widely consumed as a seasonal fresh vegetable, renowned for their affordability and richness in antioxidants and bioactive compounds. This study employed ultra-high-performance liquid chromatogram-Q-Exactive HF mass spectrometry (UHPLC-QE-MS) and multivariate statistical analysis to comprehensively evaluate the chemical profile of mung bean sprouts following sulfite immersion. The findings revealed a significant alteration in the overall chemical composition of mung bean sprouts following sodium sulfite immersion. Eleven components, including four sulfur-containing compounds, were identified as characteristic markers distinguishing between non-immersed and sodium sulfite-immersed mung bean sprouts. Esterification and addition reactions were inferred to occur during sodium sulfite immersion, leading to the transformation of flavonoid and saponin sulfates. Commercial samples analysis indicated that sulfur-containing compounds were detectable in 9 of 11 commercial mung bean sprouts. Meanwhile, when sodium sulfite concentration exceeded 3.00 mg/mL and immersion time exceeded 360 min, the contents of total polyphenol and flavonoid were significantly reduced and the antioxidant activity was adversely influenced.

The distribution of beneficial mutational effects between two sister yeast species poorly explains natural outcomes of vineyard adaptation.

Domesticated strains of Saccharomyces cerevisiae have adapted to resist copper and sulfite, two chemical stressors commonly used in winemaking. S. paradoxus, has not adapted to these chemicals despite being consistently present in sympatry with S. cerevisiae in vineyards. This contrast represents a case of apparent evolutionary constraints favoring greater adaptive capacity in S. cerevisiae. In this study, we used a comparative mutagenesis approach to test whether S. paradoxus is mutationally constrained with respect to acquiring greater copper and sulfite resistance. For both species, we assayed the rate, effect size, and pleiotropic costs of resistance mutations and sequenced a subset of 150 mutants isolated from our screen. We found that the distributions of mutational effects displayed by the two species were very similar and poorly explained the natural pattern. We also found that chromosome VIII aneuploidy and loss of function mutations in PMA1 confer copper resistance in both species, whereas loss of function mutations in REG1 were only a viable route to copper resistance in S. cerevisiae. We also observed a single de novo duplication of the CUP1 gene in S. paradoxus but none in S. cerevisiae. For sulfite, loss of function mutations in RTS1 and KSP1 confer resistance in both species, but mutations in RTS1 have larger average effects in S. paradoxus. Our results show that even when the distributions of mutational effects are largely similar, species can differ in the adaptive paths available to them. They also demonstrate that assays of the distribution of mutational effects may lack predictive insight concerning adaptive outcomes.

Determination of Sulfites in Dried Fruits by Paper Spray Ionization Tandem Mass Spectrometry.

Sulfite, a widely used food additive, is subject to regulated labeling. The extraction of sulfite as the stable hydroxymethylsulfonate (HMS) form and its quantitative analysis by liquid chromatography-tandem mass spectrometry (LC-MS/MS) has been recognized for their good sensitivity, selectivity, and versatility across various food materials. This study aimed to develop a cost-effective and simpler method for sulfite quantitation, while maintaining the superior sensitivity and selectivity of mass spectrometry (MS). To achieve this, we introduced paper spray ionization (PSI), an ambient desorption ionization technique that could achieve the direct measurement of analytes without employing separation. We also employed a novel internal standard (IS) structurally similar to the analyte, replacing the more expensive isotopically labeled IS. Although the PSI-MS/MS method developed in this study exhibited slightly lower analytical performance compared to the conventional LC-MS/MS, it remained effective for sulfite analysis in dried fruits.

The self-boosting ultrafast removal of Cr(VI) and organic dye in textile wastewater through sulfite-induced redox processes.

The treatment of textile wastewater containing harmful metal ions poses a significant challenge in industrial applications due to its environmental impact. In this study, the use of sulfite for treating simulated dye wastewater containing New Coccine (NC) and Cr(VI) was investigated. The removal of NC was influenced by the redox reaction between Cr(VI) and sulfite, demonstrating a strong self-boosting effect of Cr(VI) on NC removal. Remarkable NC decoloration (95%) and Cr(VI) reduction (90%) were achieved within 1 min, highlighting the effectiveness of the treatment. Quenching experiments and electron paramagnetic resonance (EPR) technology confirmed that singlet oxygen (1O2) was the main oxidative agent for organic dye removal and SO4•-, •OH and Cr(V) were also identified as key contributors to NC degradation. The Cr(VI)/sulfite system exhibited higher efficiency in degrading azo dyes, such as NC and Congo Red (CR), compared to non-azo dyes like Methylene Blue (MB). This superiority may be attributed to the action of Cr(V) on azo groups. Additionally, the COD removal experiments were conducted on the actual dye wastewater, showing the excellent performance of the Cr(VI)/Sulfite system in treating industrial textile wastewater. This approach presents a promising strategy for effective "waste control by waste", offering great potential for addressing challenges related to dye wastewater treatment and environmental pollution control in practical industrial scenarios.

Sulfite-Assisted Acetate Conversion from CO Electroreduction.

The efficient acetate conversion from CO electroreduction is challenging due to the poor selectivity at high reaction rate, which requires the competition with H2 and other C2+ (i. e., ethylene, ethanol, n-propanol) reduction products. Electrolyte engineering is one of the efficient strategies to regulate the reaction microenvironment. In this work, the adding of sulfite (SO3 2-) with high nucleophilicity in KOH electrolytes was demonstrated to enable improving the CO-to-acetate conversion via generating a S-O chemical bond between SO3 2- and oxygenated *C2 intermediates (i. e., *CO-CO, *CO-COH) compared with that in pure KOH system on both synthesized Cu(200)- and normal commercial Cu(111)-facets-exposed metallic Cu catalysts. As a result, the prepared Cu(200)-facets-exposed metallic Cu catalyst with surface ions modification showed an superior Faradaic efficiency of 63.6 % at -0.6 A ⋅ cm-2, and extraordinary absolute value of peak partial current density as high as 1.52 A ⋅ cm-2 with adding SO3 2- in KOH electrolytes, compared to the best reported values in both CO and CO2 electroreduction. Our work suggests an attractive strategy to introduce the oxyanion with high nucleophilicity in electrolytes to regulate the microenvironment for industrial-current-density electrosynthesis of acetate from CO electroreduction.

New insight into wastewater treatment by activation of sulfite with humic acid under visible light irradiation.

Sulfite (S(IV)), as an alternative to persulfate, has demonstrated its cost-effectiveness and environmentally friendly nature, garnering increasing attention in Advanced Oxidation Processes (AOPs). Dissolved organic matter (DOM) commonly occurred in diverse environments and was often regarded as an interfering factor in sulfite-based AOPs. However, less attention has been paid to the promotion of the activation of sulfite by excited DOM, which could produce various reactive intermediates. The study focused on the activation of sulfite using visible light (VL) - excited humic acid (HA) to efficiently degrade many common organic pollutants, which was better than peroxydisulfate (PDS) and peroxymonosulfate (PMS) systems. Quenching experiments and electron paramagnetic resonance (EPR) analysis revealed that the triplet states of HA (3HA*) activated sulfite through energy transfer, resulting in the production of SO4·-, O2·-, and 1O2. The most significant active species found in the degradation of roxarsone (ROX) was 1O2, which was a non-radical pathway and exhibits high selectivity for pollutant degradation. This non-radical pathway was not commonly observed in traditional sulfite-based AOPs. Additionally, the coexistence of various inorganic anions, such as NO3-, Cl-, SO42-, CO32-, and PO43-, had little effect on the degradation of ROX. Furthermore, DOM from different natural water demonstrated efficient activation of S(IV) under light conditions, opening up new possibilities for applying sulfite-based advanced oxidation to the remediation of organic pollution in diverse sites and water bodies. In summary, this research offered promising insights into the potential application of sulfite-based AOPs, facilitated by photo-excited HA, as a new strategy for efficiently degrading organic pollutants in various environmental settings.

Sulfate-reducing bacteria decreases fractional pressure of H2 to accelerate short-chain fatty acids production from waste activated sludge fermentation assisted with zero-valent iron activated sulfite pretreatment.

The production of short-chain fatty acids (SCFAs) is constrained by substrate availability and the increased fractional pressure of H2 emitted by acidogenic/fermentative bacteria during anaerobic fermentation of waste activated sludge (WAS). This study introduced a novel approach employing zero-valent iron (ZVI)-activated sulfite pretreatment combined with H2-consuming sulfate-reducing bacteria (SRB) mediation to improve SCFAs, especially acetate production from WAS fermentation. Experimental results showed that the combined ZVI-activated sulfite and incomplete-oxidative SRB (io-SRB) process achieved a peak SCFAs production of 868.11 mg COD/L, with acetate accounting for 80.55 %, which was 7.90- and 2.18-fold higher than that obtained from raw WAS fermentation, respectively. This could be firstly attributed to the SO4- and OH generated by ZVI-activated sulfite, which significantly promoted WAS decomposition, e.g., soluble proteins and carbohydrates increased 14.3- and 10.8-fold, respectively, over those in raw WAS. The biodegradation of dissolved organic matter was subsequently enhanced by the synergistic interaction and H2 transfer between anaerobic fermentation bacteria (AFB) and io-SRB. The positive and negative correlations among AFB, nitrate-reducing bacteria (NRB) and the io-SRB consortia were revealed by molecular ecological network (MEN) and Mantel test. Moreover, the expression of functional genes was also improved, for instance, in relation to acetate formation, the relative abundances of phosphate acetyltransferase and acetate kinase was 0.002 % and 0.005 % higher than that in the control test, respectively. These findings emphasized the importance of sulfate radicals-based oxidation pretreatment and the collaborative relationships of multifunctional microbes on the value-added chemicals and energy recovery from sludge fermentation.

A triphenylamine-benzofuran-derived fluorescent probe for monitoring sulfite in Chinese medicinal materials and bioimaging.

In this work, a triphenylamine-benzofuran-derived fluorescent probe TBSF was developed for monitoring the sulfite level in Chinese medicinal materials and imaging in living cells. In the testing system, under 445 nm excitation, TBSF responded to sulfite steadily with a 540 nm fluorescence reporting signal. The testing system showed advantages including high sensitivity, rapid response, and high selectivity. In particular, TBSF achieved the sulfite detection in the water decoction of Chinese medicinal materials from both addition and excessive fumigation. It also realized the intracellular imaging of both exogenous and endogenous sulfite in living HepG2 cells. The imaging in water decoction-treated cells inferred the potential for the interdisciplinary detection.

A FRET-based multifunctional fluorescence probe for the simultaneous detection of sulfite and viscosity in living cells.

Viscosity and sulfur dioxide derivatives were significant indicators for the assessment of health threat and even cancers, therefore, on-site and real time detection of viscosity and sulfur dioxide derivatives has obtained considerable attentions. An FRET-based fluorescence probe JZX was designed and synthesized based on a novel energy donor of N,N-diethyl-4-(1H-phenanthro[9,10-d]imidazol-2-yl)benzamide fluorophore. JZX exhibited a large Stokes shift (230 nm), high energy transfer efficiency, wide emission channel gap (135 nm) and excellent stability and biocompatibility. JZX detected sulfur dioxide with low detection limit (55 nM), fast responding (16 min), high selectivity and sensitivity. Additionally, JZX tend to target endoplasmic reticulum of which normal metabolism will be disturbed by the abnormal levels of viscosity and sulfur dioxide derivatives. Prominently, JZX could concurrently detect viscosity and sulfur dioxide derivatives depending on different fluorescence signals in living cells for the screening of cancer cells. Hence, probe JZX will be a promising candidate for the detection of viscosity and sulfur dioxide derivatives, and even for the diagnosis of liver cancers.

Integrating UPLC-QTOF-MS/MS and UPLC-DAD to evaluate the influence of sulfur-fumigated Paeoniae Radix Alba on the overall quality of three Si-Wu-Tang formulations.

INTRODUCTION: Sulfur-fumigation of Paeoniae Radix Alba (PRA) could induce the chemical transformation of its bioactive component paeoniflorin into a sulfur-containing derivative paeoniflorin sulfite, and thus alter the quality, bioactivities, pharmacokinetics, and toxicities of PRA. However, how sulfur-fumigated PRA (S-PRA) affects the quality of PRA-containing complex preparations has not been intensively evaluated. OBJECTIVES: We intend to evaluate the influence of S-PRA on the overall quality of three kinds of Si-Wu-Tang (SWT) formulations, i.e., decoction (SWT-D), granule (SWT-G), and mixture (SWT-M). MATERIAL AND METHODS: An UPLC-DAD multi-components quantification method was used to compare the transfer rates of paeoniflorin sulfite and other 10 bioactive components between S-PRA-containing and NS-PRA-containing SWT formulations. An UPLC-QTOF-MS/MS-based target metabolomics approach was applied to explore the differential sulfur-containing derivatives in S-PRA-containing SWT formulations. RESULTS: The transfer rates of paeoniflorin sulfite in three S-PRA-containing SWT formulations were all higher than 100%. Moreover, S-PRA also increased the transfer rate of 5-hydroxymethylfurfural, 1,2,3,4,6-O-pentagalloylglucose, whereas decreased that of paeoniflorin, albiflorin, and ferulic acid in three SWT formulations. Six pinane monoterpene glucoside sulfites originally identified in S-PRA, were also detectable in three S-PRA-containing SWT formulations. In addition, seven phenolic acid sulfites including (3Z)-6-sulfite-ligustilide, (3E)-6-sulfite-ligustilide, 6,8-disulfite-ligustilide, ferulic acid sulfite, neochlorogenic acid sulfite, chlorogenic acid sulfite, and angelicide sulfite (or isomer) were newly identified in these three S-PRA-containing formulations. CONCLUSION: S-PRA could differentially affect the transfer rate of paeoniflorin sulfite and other bioactive components during the preparation of three SWT formulations and subsequently the overall quality thereof.

Reaction Mechanism Catalyzed by the Dissimilatory Sulfite Reductase - The Role of the Siroheme-[4FeS4] Cofactor.

The present work is another part of our investigation on the pathway of dissimilatory sulfate reduction and covers a theoretical study on the reaction catalyzed by dissimilatory sulfite reductase (dSIR). dSIR is the terminal enzyme involved in this metabolic pathway, which uses the siroheme-[4Fe4S] cofactor for six-electron reduction of sulfite to sulfide. In this study we use a large cluster model containing siroheme-[4Fe4S] cofactor and protein residues involved in the direct interactions with the substrate, to get insight into the most feasible reaction mechanism and to understand the role of each considered active site component. In combination with earlier studies reported in the literature, our results lead to several interesting insights. One of the most important conclusions is that the reaction mechanism consists of three steps of two-electron reduction of sulfur and the probable role of the siroheme-[4Fe4S] cofactor is to ensure the delivery of packages of two electrons to the reactant.