Evaluation of emergency skin decontamination protocols in response to an acid attack (vitreolage).

The incidence of "acid attacks" (vitreolage) is a global concern, with those affected often receiving lifelong medical care due to physical and psychological damage. The purpose of this study was to evaluate the effectiveness of several emergency skin decontamination approaches against concentrated (>99 %) sulphuric acid and to identify the effective window of opportunity for decontamination. The effects of four decontamination methods (dry, wet, combined dry & wet and cotton cloth) were assessed using an in vitro diffusion cell system containing dermatomed porcine skin. Sulphuric acid (H2SO4) was applied to the skin with decontamination protocols performed at 10 s, 30 s, 8 min, and 30 min post exposure. Skin damage was quantified by tritiated water (3H2O) penetration, receptor fluid pH and photometric stereo imaging (PSI), with quantification of residual sulphur (by SEM-EDS) to determine overall decontamination efficiency. Skin translucency (quantified by PSI) demonstrated a time-dependent loss of dermal tissue integrity from 10 s. Quantification of dermal sulphur content confirmed the rapid (exponential) decrease in decontamination efficiency with time. The pH of the water effluent indicated complete neutralisation of acid from the skin surface after 90 s of irrigation. Wet decontamination (either alone or immediately following dry decontamination) was the most effective intervention evaluated, although no decontamination technique was statistically effective after 30 s exposure to the acid. These data demonstrate the time-critical consequences of dermal exposure to concentrated sulphuric acid: we find no practical window of opportunity for acid decontamination, as physical damage is virtually instantaneous.

Unveiling the overlooked threat: antibiotic resistance in groundwater near an abandoned sulfuric acid plant in Xingyang, China.

Groundwater near a sulfuric acid plant in Xingyang, Henan, China was sampled from seven distinct sites to explore the prevalence of antibiotic resistance genes (ARGs) and mobile genetic elements (MGEs). Results showed that genes aadA, blaCTX-M, tetA, qnrA, and sul1 were detected with 100% frequency followed by aac(6')-Ib (85.71%), ermB (85.71%), and tetX (71.42%). Most abundant ARGs were sul1 in LSA2 (1.15 × 1011 copies/mL), tetA in LSA6 (4.95 × 1010 copies/mL), aadA in LSA2 (4.56 × 109 copies/mL), blaCTX-M in LSA4 (1.19 × 109 copies/mL), and ermB in LSA5 (1.07 × 109 copies/mL). Moreover, in LSA2, intl1 as a marker of class 1 integron emerged as the most abundant gene as part of MGE (2.25 × 1011 copies/mL), trailed by ISCR1 (1.57 × 109 copies/mL). Environmental factors explained 81.34% of ARG variations, with a strong positive correlation between the intl2 and blaCTX-M genes, as well as the ISCR1 gene and qnrA, tetA, intl2, and blaCTX-M. Furthermore, the intI1 gene had a strong positive connection with the aadA, tetA, and sul1 genes. Moreover, the aac(6')-Ib gene was associated with As, Pb, Mg, Ca, and HCO3-. The intl2 gene was also shown to be strongly associated with Cd. Notably, network analysis highlighted blaCTX-M as the most frequently appearing gene across networks of at least five genera. Particularly, Lactobacillus, Plesiomonas, and Ligilactobacillus demonstrated correlations with aadA, qnrA, blaCTX-M, intI2, and ISCR1. Based on 16S rRNA sequencing, the dominant phyla were Proteobacteria, Firmicutes, Bacteroidota, Acidobacteriota, and Actinobacteriota, with dominant genera including Pseudomonas, Ligilactobacillus, Azoarcus, Vogesella, Streptococcus, Plesiomonas, and Ferritrophicum. These findings enhance our understanding of ARG distribution in groundwater, signaling substantial contamination by ARGs and potential risks to public health.

Investigation and characterization of changes in potato peels by thermochemical acidic pre-treatment for extraction of various compounds.

Potato peel waste (PPW) is an underutilized substrate which is produced in huge amounts by food processing industries. Using PPW a feedstock for production of useful compounds can overcome the problem of waste management as well as cost-effective. In present study, potential of PPW was investigated using chemical and thermochemical treatment processes. Three independent variables i.e., PPW concentration, dilute sulphuric acid concentration and liberation time were selected to optimize the production of fermentable sugars (TS and RS) and phenolic compounds (TP). These three process variables were selected in the range of 5-15 g w/v substrate, 0.8-1.2 v/v acid conc. and 4-6 h. Whole treatment process was optimized by using box-behnken design (BBD) of response surface methodology (RSM). Highest yield of total and reducing sugars and total phenolic compounds obtained after chemical treatment was 188.00, 144.42 and 43.68 mg/gds, respectively. The maximum yield of fermentable sugars attained by acid plus steam treatment were 720.00 and 660.62 mg/gds of TS and RS, respectively w.r.t 5% substrate conc. in 0.8% acid with residence time of 6 h. Results recorded that acid assisted autoclaved treatment could be an effective process for PPW deconstruction. Characterization of substrate before and after treatment was checked by SEM and FTIR. Spectras and micrographs confirmed the topographical variations in treated substrate. The present study was aimed to utilize biowaste and to determine cost-effective conditions for degradation of PWW into value added compounds.

Green algae Ulva lactuca-derived biochar-sulfur improves the adsorption of methylene blue from water.

The present investigation explores the efficacy of green algae Ulva lactuca biochar-sulfur (GABS) modified with H2SO4 and NaHCO3 in adsorbing methylene blue (MB) dye from aqueous solutions. The impact of solution pH, contact duration, GABS dosage, and initial MB dye concentration on the adsorption process are all methodically investigated in this work. To obtain a thorough understanding of the adsorption dynamics, the study makes use of several kinetic models, including pseudo-first order and pseudo-second order models, in addition to isotherm models like Langmuir, Freundlich, Tempkin, and Dubinin-Radushkevich. The findings of the study reveal that the adsorption capacity at equilibrium (qe) reaches 303.78 mg/g for a GABS dose of 0.5 g/L and an initial MB dye concentration of 200 mg/L. Notably, the Langmuir isotherm model consistently fits the experimental data across different GABS doses, suggesting homogeneous adsorption onto a monolayer surface. The potential of GABS as an efficient adsorbent for the extraction of MB dye from aqueous solutions is highlighted by this discovery. The study's use of kinetic and isotherm models provides a robust framework for understanding the intricacies of MB adsorption onto GABS. By elucidating the impact of various variables on the adsorption process, the research contributes valuable insights that can inform the design of efficient wastewater treatment solutions. The comprehensive analysis presented in this study serves as a solid foundation for further research and development in the field of adsorption-based water treatment technologies.

Novel procedures for olive leaves extracts processing: Selective isolation of oleuropein and elenolic acid.

Several processes have been developed in the past to selectively extract oleuropein and its aglycones from olive derived materials. In the present manuscript, we outline a novel approach for processing olive leaves aqueous extracts. This allowed first to select microwave irradiation as the methodology able to provide a large enrichment in oleuropein. Subsequently, the use of lamellar solids led to the selective and high yield concentration of the same. Adsorption on solids also largely contributed to the long term chemical stability of oleuropein. Finally, an eco-friendly, readily available, and reusable catalyst like H2SO4 supported on silica was applied for the hydrolysis of oleuropein into hydroxytyrosol and elenolic acid. This latter was in turn selectively isolated by an acid-base work-up providing its monoaldehydic dihydropyran form (7.8 % extractive yield), that was unequivocally characterized by GC-MS. The isolation of elenolic acid in pure form is described herein for the first time.

Kinetics of extracting valuable components from Ti-bearing blast furnace slag by acidolysis with sulphuric acid.

Ti-bearing blast furnace slag is a kind of solid waste produced by Pangang Group Company through the blast furnace smelting method. A variety of valuable components can be extracted from the Ti-bearing blast furnace slag after acidolysis with concentrated sulphuric acid. In order to study the kinetics of acidolysis, this paper investigated the effects of the acidolysis temperature, acid-slag ratio and raw material particle size on the overall extraction rate of Ti4+, Mg2+ and Al3+ components at different reaction times, and simulated the acidolysis process by using the unreacted shrinking core model. The results showed that the acidolysis process was controlled by internal diffusion with an apparent activation energy of 19.05 kJ mol-1 and the semi-empirical kinetic equation of the acidolysis process was obtained.

Iron Control in Liquid Effluents: Pseudo-Emulsion Based Hollow Fiber Membrane with Strip Dispersion Technology with Pseudo-Protic Ionic Liquid (RNH3+HSO4-) as Mobile Carrier.

The transport of iron(III) from aqueous solutions through pseudo-emulsion-based hollow fiber with strip dispersion (PEHFSD) was investigated using a microporous hydrophobic hollow fiber membrane module. The pseudo-protic ionic liquid RNH3HSO4- dissolved in Solvesso 100 was used as the carrier phase. This pseudo-protic ionic liquid was generated by the reaction of the primary amine Primene JMT (RNH2) with sulphuric acid. The aqueous feed phase (3000 cm3) containing iron(III) was passed through the tube side of the fiber, and the pseudo-emulsion phase of the carrier phase (400 cm3) and sulphuric acid (400 cm3) were circulated through the shell side in counter-current operational mode, using a single hollow fiber module for non-dispersive extraction and stripping. In the operation, the stripping solution (sulphuric acid) was dispersed into the organic membrane phase in a tank with a mixing arrangement (a four-blade impeller stirrer) designed to provide strip dispersion. This dispersed phase was continuously circulated from the tank to the membrane module in order to provide a constant supply of the organic solution to the fiber pores. Different hydrodynamic and chemical parameters, such as feed (75-400 cm3/min) and pseudo-emulsion phases (50-100 cm3/min) flows, sulphuric acid concentration in the feed and stripping phases (0.01-0.5 M and 0.5-3 M, respectively), metal concentration (0.01-1 g/L) in the feed phase, and PPILL concentration (0.027-0.81 M) in the carrier phase, were investigated. From the experimental data, different diffusional parameters were estimated, concluding that the resistance due to the feed phase was not the rate-controlling step of the overall iron(III) transport process. It was possible to concentrate iron(III) in the strip phase using this smart PEHFSD technology.

The effect of an acid catalyst on the hydrothermal carbonization of sewage sludge.

This research is focused on the addition of a catalyst, sulphuric acid (VI), to sewage sludge, and its effect on solid and liquid products resulting from the hydrothermal carbonization process. Consequently, for hydrochars, proximate and ultimate analyses, higher heating value and specific surface area were determined. Additionally, Fourier-transform infrared spectrophotometric and thermogravimetric analyses were conducted. The heavy metal contents in the ash composition of hydrochars were identified by X-ray fluorescence spectrometry. It was confirmed that the catalyst addition changed the structure as well as the physical and chemical properties of hydrochars and their ashes. Regarding post-processing water, both pH value and conductivity were determined and the element composition, including heavy metals, was conducted by the inductively coupled plasma optical emission and mass spectrometry analyses. It was found that the addition of the catalyst caused a decrease in heavy metal contents and an increase of phosphorus compound in filtrates.

Towards Electrochemical Sensor Based on Molecularly Imprinted Polypyrrole for the Detection of Bacteria-Listeria monocytogenes.

Detecting bacteria-Listeria monocytogenes-is an essential healthcare and food industry issue. The objective of the current study was to apply platinum (Pt) and screen-printed carbon (SPCE) electrodes modified by molecularly imprinted polymer (MIP) in the design of an electrochemical sensor for the detection of Listeria monocytogenes. A sequence of potential pulses was used to perform the electrochemical deposition of the non-imprinted polypyrrole (NIP-Ppy) layer and Listeria monocytogenes-imprinted polypyrrole (MIP-Ppy) layer over SPCE and Pt electrodes. The bacteria were removed by incubating Ppy-modified electrodes in different extraction solutions (sulphuric acid, acetic acid, L-lysine, and trypsin) to determine the most efficient solution for extraction and to obtain a more sensitive and repeatable design of the sensor. The performance of MIP-Ppy- and NIP-Ppy-modified electrodes was evaluated by pulsed amperometric detection (PAD). According to the results of this research, it can be assumed that the most effective MIP-Ppy/SPCE sensor can be designed by removing bacteria with the proteolytic enzyme trypsin. The LOD and LOQ of the MIP-Ppy/SPCE were 70 CFU/mL and 210 CFU/mL, respectively, with a linear range from 300 to 6700 CFU/mL.

Effects of Au@Ag core-shell nanostructure with alginate coating on male reproductive system in mice.

Despite the widespread use of silver nanoparticles (NPs), these NPs can accumulate and have toxic effects on various organs. However, the effects of silver nanostructures (Ag-NS) with alginate coating on the male reproductive system have not been studied. Therefore, this study aimed to investigate the impacts of this NS on sperm function and testicular structure. After the synthesis and characterization of Ag-NS, the animals were divided into five groups (n = 8), including one control group, two sham groups (received 1.5 mg/kg/day alginate solution for 14 and 35 days), and two treatment groups (received Ag-NS at the same dose and time). Following injections, sperm parameters, apoptosis, and autophagy were analyzed by the TUNEL assay and measurement of the mRNA expression of Bax, Bcl-2, caspase-3, LC3, and Beclin-1. Fertilization rate was assessed by in vitro fertilization (IVF), and testicular structure was analyzed using the TUNEL assay and hematoxylin and eosin (H&E) staining. The results showed that the NS was rod-shaped, had a size of about 60 nm, and could reduce sperm function and fertility. Gene expression results demonstrated an increase in the apoptotic markers and a decrease in autophagy markers, indicating apoptotic cell death. Moreover, Ag-NS invaded testicular tissues, especially in the chronic phase (35 days), resulting in tissue alteration and epithelium disintegration. The results suggest that sperm parameters and fertility were affected. In addition, NS has negative influences on testicular tissues, causing infertility in men exposed to these NS.

Variation in potential feeding value of triticale forage among plant fraction, maturity stage, growing season and genotype.

Cereal forages, such as triticale forage, progressively gain interest as alternative crop for maize. The main study objective was to investigate the variation in potential feeding value of triticale forage among maturity stage, growing season and genotype, using total plant and stem fractions. Therefore, near infrared spectroscopy (NIRS) was evaluated as fast screening tool. The prediction ability was good (ratio of prediction to deviation, RPD ≥3.0) for total plant residual moisture, starch, sugars and for stem crude ash (CAsh) and neutral detergent fibre (aNDFom); suitable for screening (2.0 ≤ RPD <3.0) for total plant CAsh, acid detergent fibre (ADFom), in vitro digestibility of organic matter (IVOMD), in vitro digestibility of neutral detergent fibre (IVNDFD) and for stem total lignin (TL) and IVNDFD; poor (1.5 ≤ RPD <2.0) for total plant crude protein, crude fat, aNDFom, lignin (sa) and for stem Klason lignin (KL); unreliable (RPD <1.5) for stem residual moisture and acid soluble lignin (ASL). The evolution in potential feeding value of 36 genotypes harvested at the medium and late milk to the early, soft and hard dough stage was followed. The most important changes occurred between the late milk and early dough stage, with little variation in quality after the soft dough stage. During 2 growing seasons, variation in feeding value of 120 genotypes harvested at the soft dough stage was demonstrated. Interestingly, variation in stem IVNDFD is almost twice as high as for the total plant (CV 12.4% versus 6.6%). Furthermore, Spearman correlations show no link between dry matter yield and digestibility of genotypes harvested at the soft dough stage. Based on linear regression models ADFom appears as main predictor of both plant IVOMD and plant IVNDFD. Stem IVNDFD is particularly determined by KL.

Acidification of slurry to reduce ammonia and methane emissions: Deployment of a retrofittable system in fattening pig barns.

Livestock farming, and in particular slurry management, is a major contributor to ammonia (NH3) and methane (CH4) emissions in Europe. Furthermore, reduced NH3 and CH4 emissions are also relevant in licensing procedures and the management of livestock buildings. Therefore, the aim is to keep emissions from the barn as low as possible. Acidification of slurry in the barn can reduce these environmental and climate-relevant emissions by a pH value of 5.5. In this study, an acidification technology was retrofitted in an existing fattening pig barn equipped with a partially slatted floor. The slurry in a compartment with 32 animals was acidified. An identical compartment was used for reference investigations (case-control approach). Several times a week slurry was pumped for acidification in a process tank outside the barn compartment in a central corridor, where sulphuric acid (H2SO4) was added. Then the slurry was pumped back into the barn. In contrast to other systems, where acidified slurry was stored mainly in external storage tanks, in this study the slurry was completely stored in the slurry channels under the slatted floor, during the entire fattening period. The emission mass flow of NH3 and CH4 was measured continuously over three fattening periods, with one period in spring and two periods in summer. On average 17.1 kg H2SO4 (96%) (m³ slurry)-1 were used for acidification during the three fattening periods. NH3 and CH4 emissions were reduced by 39 and 67%, respectively. The hydrogen sulphide (H2S) concentration in the barn air of the acidification compartment was harmlessly low (0.02 ppm). Thus, despite the storage of the acidified slurry in the barn, the system leads to a lower concentration of detrimental gases, which is beneficial for the animals' as well as for the workers' health. The study shows that it is possible to retrofit acidification technology into existing pig barns. Further investigations shall identify possible measures to reduce the amount of H2SO4 used and thus minimise the sulphur input into the slurry.

A novel and greener sequential column leaching approach for the treatment of two different Greek laterites.

Τhe present study investigates, from an environmental protection viewpoint, the efficiency of sequential column leaching of two different Greek laterites, i.e. a limonitic ore from central and a saprolitic ore from northern Greece. First, the most refractory limonitic laterite is leached in the first column for 15 days and the obtained pregnant leach solution (PLS) is further used for the leaching of the easier to treat saprolitic ore in the second column, thus achieving a significantly reduced acid consumption. The main parameters affecting the process efficiency, i.e. acid molarity (1.5 or 3 mol/L H2SO4) and addition of sodium sulfite (Na2SO3) in the leaching solution were studied. The extraction of Ni, Co, Fe, Al, Mg, Mn and Ca was determined by Atomic Absorption Spectroscopy (AAS), while the characterization of the ores and final residues was carried out by X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA/DTA), and Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM-EDS) analysis. The results confirm the efficiency of the proposed green approach, which with the use of leaching solution containing 1.5 mol/L H2SO4 and 20 g/L Na2SO3 resulted in 73.8 % Ni, 71.6 % Co and 8.4 % Fe extraction after a short period of time (33 days), while the acid consumption, which is a serious environmental concern, was very low and did not exceed 300 kg/t ore. Overall, the proposed process not only improves the efficiency of leaching of different types of laterites for the recovery of both Ni and Co but also reduces the environmental impacts due to the significantly lower acid consumption.

The gram-negative bacterium Escherichia coli as a model for testing the effect of carbonic anhydrase inhibition on bacterial growth.

Carbonic anhydrases, catalysing the reversible CO2 hydration reaction, contribute in all living organisms to the maintenance of stable metabolic functions depending on intracellular concentrations of carbon dioxide, bicarbonate, and protons. Recent studies have examined how CAs affect bacterial lifecycle, considering these enzymes druggable targets due to interference with their activities by using inhibitors or activators. Here, we propose Escherichia coli cells as a model for testing the effect of acetazolamide (AZA), a potent CA inhibitor, on bacterial survival by evaluating E. coli growth through its glucose consumption. AZA, at concentrations higher than 31.2 µg/mL, was able to impair E. coli growth and glucose uptake. AZA is a good inhibitor of the two recombinant E. coli CAs, the ß-CA CynT2, and the γ-CA EcoCAγ, with KIs of 227 and 248 nM, respectively. This study provides a proof-of-concept, low-cost method for identifying effective CA inhibitors capable of impairing bacterial metabolism.

Antifreezing Proton Zwitterionic Hydrogel Electrolyte via Ionic Hopping and Grotthuss Transport Mechanism toward Solid Supercapacitor Working at -50 °C.

Hydrogel electrolyte is widely used in solid energy storage devices because of its high ionic conductivity, environmental friendliness, and non-leakage property. However, hydrogel electrolyte is not resistant to freezing. Here, a high proton conductive zwitterionic hydrogel electrolyte with super conductivity of 1.51 mS cm-1 at -50 °C is fabricated by random copolymerization of acrylamide and zwitterionic monomer in the presence of 1 m H2 SO4 and ethylene glycol (EG). The antifreezing performance and low temperature conductivity are ascribed to hydrogen bonds and ionic bonds between the components and water molecules in the system and can be tuned by changing the monomer ratio and EG contents. The proton hopping migration on the ionic group of the polymer chains and Grotthuss proton transport mechanism are responsible for the high proton conductivity while Grotthuss transport is dominated at the glassy state of the polymer chains. The electrolyte-assembled supercapacitor (SC) offers high specific capacitance of 93.5 F g-1 at 25 °C and 62.0 F g-1 at -50 °C with a capacitance retention of 91.1% and 81.5% after 10 000 cycles, respectively. The SC can even work at -70 °C. The electrolyte outperforms most reported antifreezing hydrogel electrolytes and has high potential in low-temperature devices.

Method optimisation for prolonged laboratory storage of Ascaridia galli eggs.

Eggs in the infective stage of the chicken nematode Ascaridia galli are often required for in vivo and in vitro studies on this parasite. The reliability of any artificial A. galli infection depends on the viability and embryonation capacity of A. galli eggs. The aim of this study was to determine ideal storage conditions for maximising the viability of A. galli eggs and maintaining viability for the longest period. A 2 × 2 × 3 × 5 factorial experimental design was employed to investigate the effects of storage temperature (4°C or 26°C), storage condition (aerobic or anaerobic), storage medium (water, 0.1 N H2SO4 or 2% formalin) and storage period (4, 8, 12, 16 and 20 weeks). The viability of eggs was assessed after eggs in all treatment groups were held aerobically at 26°C for 2 weeks after the storage period to test embryonation capacity. Based on morphological characteristics, they were categorised as undeveloped, developing, vermiform, embryonated or dead. The maintenance of viability during storage at 4°C was optimal under anaerobic conditions while at 26°C it was optimal under aerobic conditions. Anaerobic conditions at 26°C led to a rapid loss of viability while aerobic conditions at 4°C had a less severe negative effect on maintenance of viability. Egg storage in 0.1 N H2SO4 resulted in a significantly higher viability overall (54.7%) than storage in 2% formalin (49.2%) or water (37.3%) (P < 0.0001). Untreated water was the least favourable storage medium when eggs were stored at 26°C while it was a medium of intermediate quality at 4°C. The viability of A. galli eggs decreased significantly with storage time (P < 0.0001) depending on the other factors. The lowest rate of decline was seen with storage of eggs under anaerobic conditions at 4°C or aerobic conditions at 26°C in 0.1 N H2SO4. Eggs in these treatments retained up to 72% of overall viability at 20 weeks with a decline rate of approximately 2% per week with no significant difference between the two. Therefore, this study has clearly revealed opposing aerobic conditions required for prolonged storage of A. galli eggs in the pre-embryonated state at 4°C. It has also identified that 0.1 N H2SO4 provides the best preservation against degradation during storage, particularly at 26°C under aerobic conditions. Achieving strictly anaerobic conditions can be difficult to achieve so storage aerobically at 26°C may be preferred for simplicity.

Fresh Properties and Sulfuric Acid Resistance of Sustainable Mortar Using Alkali-Activated GGBS/Fly Ash Binder.

In this study, sorptivity, setting time, resistance to sulfuric acid, and compressive strength of mortars that use alkali-activated GGBS and fly ash as binders, were evaluated experimentally. The activation of binders, was achieved at room temperature of 22 ± 2 °C using combinations of sodium silicates (Na2SiO3) and sodium hydroxide (NaOH) solutions in ratios of 1.5, 2.0, and 2.5. The parameters considered in terms of their effects on fresh and hardened properties include: NaOH molarity, activator ratio Na2SiO3/NaOH, mortar sample age, and relative amount of GGBS/fly ash in binder combination. Sorptivity, change in mass, and compressive strength were determined for mortar samples that were submerged in 10% sulfuric acid solution for 7 days, 28 days, and 90 days. The binder for mortar samples tested at each of the specified ages consisted of 100% GGBS (G100), 75%GGBS+25% fly ash (G75F25), or 50% GGBS + 50% fly ash (G50F50). The binder was activated using Na2SiO3 solution, combined with 10 M, 12 M, 14 M, or 16 M NaOH solution. It was found that sorptivity decreases with increase in curing age, for all activator ratios, concentrations, and relative amounts of GGBS/fly ash. Binder consisting of 75%GGBS + 25% fly ash with NaOH concentration of 12 M had the lowest sorptivity. Exposure of alkali-activated GGBS/fly ash mortar samples to sulfate attack did not cause loss in mass nor visible signs of damage/deterioration. All binder combinations experienced increase in compressive strength after curing in 10%sufluric acid solution, with the optimum G75F25 mix achieving a 28-day strength of 80.53 MPa when NaOH molarity is 10 M, which increased to 91.06 MPa after 90 days. Variation in concentration of NaOH didn't cause significant change in the magnitudes of 28-day or 90-day compressive strengths of G50F50. However, despite slow dissolution of fly ash and immersion in 10% sulfuric acid solution, G50F50 developed 28-day compressive strength of 56.23 MPa and 90-day compressive of 86.73 MPa, which qualifies G50F50 as high strength mortar for practical purposes.

Improvements in the methodology for fatty acids analysis in meat products: One-stage transmethylation and fast-GC method.

The quantification of fatty acids (FA) in meat products is frequently carried out by two-stage methylation procedures followed by long gas chromatography (GC) runs. This work aimed to simplify this methodology by means of a one-stage transmethylation method and a fast GC run, evaluating the influence of sample preparation, reagents and type of heating on the amount of FA in different meat products and optimizing a fast GC-FID (flame ionization detector) run. This allowed to establish the optimum combination of parameters (methanol + chlorotrimethylsilane, lyophilized samples and oven heating) to achieve the quantification of the highest possible amount of FA and to reduce the time of GC run from 60 to 10 min. The quality evaluation of this method obtained satisfactory results. Thus, the quantification of FA in meat products was achieved in a straightforwardly and quickly way by using a one-stage transmethylation procedure followed by a fast GC-FID run.

Acetylcholinesterase inhibitors in the giant goldenrod root.

Eight bioactive clerodane diterpenes from the root extract of Solidago gigantea Ait. (giant goldenrod) were quantified by high-performance thin-layer chromatography (HPTLC) and two newly developed hyphenated methods. One uses vanillin sulphuric acid derivatization and densitometry, and the other an inhibition assay of acetylcholinesterase (AChE) and video densitometry. Both methods gave figures of merit for quantification including 5.8-33.9 ng and 175.5-448.7 ng LOQs and 2.7-6.9 RSD% and 8.8-13.9 RSD% inter-day precisions, respectively. Based on the diterpenes' content of 14 root samples collected over a year from the same plant population, the fully flowering plant is suggested to collect the root as a source of these compounds. Excepting one diterpene (with the lowest retardation factor), the quantitative results for the richest sample obtained by the two methods were in harmony. The difference could be due to a matrix effect.

Surface Characteristics of One-Sided Charred Beech Wood.

The aim of this paper was to analyze selected properties of beech wood (Fagus sylvatica L.) treated by one-sided surface charring. Specimens were one-side charred with a hot plate using several time-temperature combinations (from 200 to 400 °C). Characteristics such as colour, discoloration, surface roughness, fire resistance, total carbohydrate content at several wood layers and decay resistance were evaluated. Surface charring was applied to the radial and tangential surfaces. Colour measurements showed that the surface of the wood turned grey due to charring. In addition to colour measurements, other experiments showed significant differences between radial and tangential specimens due to their different structures. The higher the temperature used in treating them, the lower the roughness values for radial specimens, while the trend for tangential specimens was the opposite. A smoother surface is more fire resistant, so radial specimens are generally better in this regard. Tangential specimens are more susceptible during preparation to forming cracks that impair flame resistance because a continuous protective densified layer is not formed. The determination of total carbohydrates revealed significant changes at various wood depths after surface charring. These changes were more predictable in radial specimens due to the annual ring orientation, because each layer consisted of a similar earlywood/latewood ratio. Finally, when decay resistance was assessed, weight loss was found to be lower in all specimens than in the references. The results suggest that charring at a particular combination of temperature and time improved the investigated properties of the surface-modified beech.