Surface hardness and wear resistance of prefabricated and CAD-CAM milled artificial teeth: A cross-over clinical study.

PURPOSE: To clinically evaluate the surface roughness and wear resistance of prefabricated and CAD-CAM milled acrylic resin teeth for complete dentures. MATERIALS AND METHODS: In a cross-over study design, 10 completely edentulous patients were randomly included in this study and given two complete dentures. The first complete denture was made using prefabricated teeth, while the second was constructed using CAD-CAM milled teeth. Following insertion (T0), 3 months (T3), and 6 months (T6), the complete dentures were scanned. Utilizing 3D surface super-imposition techniques, the vertical (2D wear), and volumetric (3D wear) material loss were measured. The hardness of the teeth was evaluated at the time of denture insertion (T0) and then after 6 months (T6) of denture insertion by digital Vickers hardness tester. Statistical analysis was done using SPSS software. Paired groups were compared by paired t-test. Also, a repeated measure test was used. The significant difference was considered if p ≤ 0.05. RESULTS: The time of denture function was linearly correlated with the wear of the prefabricated and CAD-CAM milled denture tooth. Prefabricated acrylic teeth had significantly more vertical and volumetric wear after 3 and 6 months, compared to CAD-CAM milled denture teeth where p-values were 0.01, 0.009, 0.003, and 0.024, respectively. Additionally, CAD-CAM milled teeth displayed significantly higher hardness values than prefabricated teeth both before and after 6 months of use where p-values were 0.001. After 6 months, all studied teeth showed a decrease in their hardness. CONCLUSIONS: In terms of wear resistance and surface hardness, CAD-CAM milled acrylic resin teeth were superior to prefabricated acrylic resin artificial teeth once the complete denture functions.

An experimental teeth bleaching agent containing casein phosphopeptide-amorphous calcium phosphate.

OBJECTIVES: This study was aimed to obtain an experimental bleaching agent by adding casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) in order to eliminate the mineral loss on the tooth surface after bleaching and to evaluate the bleaching effectiveness. MATERIALS AND METHODS: In this study, experimental bleaching agents containing 1%, 3% CPP-ACP and without CPP-ACP were obtained. Bleaching effectiveness (color change), the effect of bleaching agents on mineral content (energy dispersive x-ray spectroscopy), surface morphology (scanning electron microscope), and surface hardness of enamel (Vicker's microhardness) before and after bleaching were evaluated. The obtained data were statistically analyzed. RESULTS: When the bleaching levels of the groups were compared, no statistically significant difference was observed between the control and 1% CPP-ACP groups (p > 0.05) while the addition of 3% CPP-ACP decreased significantly the effectiveness of the bleaching agent (p < 0.05). When the effects of experimental bleaching agents on surface hardness were examined, while the enamel surface hardness decreased statistically significantly after application in the control group (p < 0.05), no statistically significant change was observed in surface hardness after the application of 1% CPP-ACP containing bleaching agent (p > 0.05). However, a statistically significant increase was observed in surface hardness after the application of 3% CPP-ACP containing bleaching agent (p < 0.05). When the Ca and P ratio of the groups were compared, no statistically significant difference was observed between the control and 1% CPP-ACP groups (p > 0.05), while they increased significantly in 3% CPP-ACP group (p < 0.05). CONCLUSIONS: The addition of 1% CPP-ACP to the bleaching agent had positive effects on the mineral content and surface hardness of the enamel, and did not negatively affect the whitening effectiveness. CLINICAL SIGNIFICANCE: Adding CPP-ACP to the bleaching agent at appropriate concentrations can eliminate possible negative effects without compromising the effectiveness of the bleaching agent.

Quantitative Prediction of Surface Hardness in Cr12MoV Steel and S136 Steel with Two Magnetic Barkhausen Noise Feature Extraction Methods.

The correlation between magnetic Barkhausen noise (MBN) features and the surface hardness of two types of die steels (Cr12MoV steel and S136 steel in Chinese standards) was investigated in this study. Back-propagation neural network (BP-NN) models were established with MBN magnetic features extracted by different methods as the input nodes to realize the quantitative prediction of surface hardness. The accuracy of the BP-NN model largely depended on the quality of the input features. In the extraction process of magnetic features, simplifying parameter settings and reducing manual intervention could significantly improve the stability of magnetic features. In this study, we proposed a method similar to the magnetic Barkhausen noise hysteresis loop (MBNHL) and extracted features. Compared with traditional MBN feature extraction methods, this method simplifies the steps of parameter setting in the feature extraction process and improves the stability of the features. Finally, a BP-NN model of surface hardness was established and compared with the traditional MBN feature extraction methods. The proposed MBNHL method achieved the advantages of simple parameter setting, less manual intervention, and stability of the extracted parameters at the cost of small accuracy reduction.

Exploring the Effect of Cetylpyridinium Chloride Addition on the Antibacterial Activity and Surface Hardness of Resin-Based Dental Composites.

The aim of this study was to evaluate the effect of cetylpyridinium chloride (CPC) addition on the antibacterial and surface hardness characteristics of two commercial resin-based dental composites (RBDCs). A total of two hundred and seventy (n = 270) specimens from Filtek Z250 Universal and Filtek Z350 XT flowable RBDCs were fabricated with the addition of CPC at 2 %wt and 4 %wt concentrations to assess their antibacterial activity using the agar diffusion test and direct contact inhibition test, and their surface hardness using the Vickers microhardness test after 1 day, 30 days, and 90 days of aging. A surface morphology analysis of the specimens was performed using a scanning electron microscope (SEM). The RBDCs that contained 2 %wt and 4 %wt CPC demonstrated significant antibacterial activity against Streptococcus mutans up to 90 days, with the highest activity observed for the 4 %wt concentration. Nevertheless, there was a reduction in antibacterial effectiveness over time. Moreover, compared to the control (0 %wt) and 2 %wt CPC groups, the universal RBDCs containing 4 %wt CPC exhibited a notable decrease in surface hardness, while all groups showed a decline in hardness over time. In conclusion, the satisfactory combination of the antibacterial effect and surface hardness property of RBDCs was revealed with the addition of a 2 %wt CPC concentration.

Influence of different hardness surfaces on gait coordination in functional ankle instability / 中国康复理论与实践

Objective To explore the influence of different hardness surfaces on gait coordination in patients with functional ankle instability(FAI). Methods Qualisys Infrared Optical Motion Capture System was used to test the coordination and variability of 15 FAI patients on the right side at Nanjing Normal University from May to July,2023.The gait cycle data were collect-ed and intercepted,and coupling angle(CA)and standard deviation of coupling angle(SDCA)were calculated by Matlab to compare the differences on different hardness surfaces. Results On coronal plane,CA of hip-ankle joint was higher on the hard surface than on the soft surface during middle stage of support and early stage of swing,and lower on its rest stages and the gait stages of hip-knee joint and knee-ankle joint than on the soft surface(P<0.01).On sagittal plane,CA of hip-ankle joint and knee-ankle joint was smaller on the hard surface than on the soft surface during middle and late stages of support,and larger than on the soft surface during their rest stages,and the gait stages of hip-knee joint(P<0.01).On horizontal plane,CA of hip-knee joint was lower on the hard surface than on the soft surface during the late stage of support,and higher than on the soft surface during its early stage of swing and bearing stage of hip-ankle joint(P<0.01).Compared with the hard surface,SDCA was smaller on the soft surface than on the hard surface only in the hip-ankle on the sagittal plane and during bearing stage of hip-knee joint,and was greater than on the hard surface for the rest(P<0.01). Conclusion FAI patients showed more distal dominance on soft surface than on hard surface during most gait cycle on 3D plane,i.e.,advantage of ankle varus and plantar flexion increased,and advantage of hip joint decreased;the coordination variability was generally higher on soft surface than on hard surface.These findings suggested that FAI patients may increase the risk of recurrent lateral ankle sprain walking on soft surface.

Change in surface properties of two different dental resin composites after using various beverages and brushing.

BACKGROUND: The study aimed to evaluate the influence of various beverages; with and without brushing; on the surface mechanical properties of two resin composites. METHODS: A total of 160 disc-shaped specimens were prepared for each of the following dental composites; nanohybrid ormocer (Admira fusion, VOCO GmbH, Cuxhaven, Germany) and nanohybrid resin composite (Grandio, VOCO GmbH, Cuxhaven, Germany). The baseline surface hardness and roughness measurements were carried out after 24 h. The composite samples were randomly distributed into one of the two groups; brushing and non-brushing, which were further divided into one of the four subgroups (n = 10); artificial saliva as control, coffee, red wine, and soft drink. In the non-brushing group, the specimens were immersed in the different beverages for five minutes three times daily for 30 days. The same procedure was done for the brushing group, in addition to brushing the specimens for five seconds. The surface hardness and roughness measurements were repeated after 30 days. One-way ANOVA and independent t-tests were used for statistical analysis. RESULTS: The soft drink had the most deteriorating effect and artificial saliva had the least. The change in surface properties was higher in the brushing subgroups. Grandio exhibited a higher change in surface microhardness while Admira fusion exhibited a higher change in surface roughness. CONCLUSIONS: The surface properties of both dental resin composites were negatively affected by using beverages and brushing.

Comparison of Marginal Adaptation, Surface Hardness and Bond Strength of Resected and Retrofilled Calcium Silicate-based Cements Used in Endodontic Surgery: An In Vitro Study.

AIMS: This study compared the effects of orthograde and retrograde methods on marginal adaptation, surface hardness, and push-out bond strength (POBS) of three calcium silicate-based used in endodontic surgery. MATERIALS AND METHODS: Ninety single-rooted human mandibular premolars were randomly assigned into six groups (n = 15/group): groups I and II, ProRoot mineral trioxide aggregate (MTA) with orthograde and retrograde methods; groups III and IV, Biodentine (BD) with orthograde and retrograde methods; groups V and VI, iRoot BP Plus (BP-RPM) with orthograde and retrograde methods. After obturation, the apical 3 mm of each root was sectioned into two 1-mm-thick root slices and evaluated for marginal adaptation using a scanning electron microscope, surface hardness using Vickers hardness tester and POBS using a universal testing machine. RESULTS: Orthograde placement had a higher maximum gap width than retrograde placement (p < 0.05), but there was no significant difference among the tested materials (p > 0.05). Biodentine exhibited lower surface hardness than ProRoot MTA and iRoot BP Plus (p < 0.05), but there was no significant difference between ProRoot MTA and iRoot BP Plus (p > 0.05). Orthograde placement had higher POBS compared with retrograde placement (p < 0.05). Biodentine had higher POBS than iRoot BP Plus (p < 0.05), but no significant difference from ProRoot MTA (p > 0.05). The failure mode was mainly mixed for all the tested materials regardless of material type or placement technique. CONCLUSION: The retrograde method had better marginal adaptation; however, the orthograde method provided better dislodgement resistance. Biodentine had lower surface hardness than MTA and iRoot BP Plus with both techniques, whereas iRoot BP Plus demonstrated lower dislodging resistance than BD. CLINICAL SIGNIFICANCE: The current findings suggest that orthograde technique, a simpler periapical surgery, with ProRoot MTA provides potentially better surface hardness and POBS than BD and iRoot BP Plus in single-canal teeth.

Comparison of surface roughness and hardness of three different brands of esthetic coated NiTi archwires: invitro study.

BACKGROUND: The purpose of the current in vitro study was to evaluate the surface roughness and hardness of three brands of as-received esthetic coated NiTi archwires and compare them with the same parameters after immersion in artificial saliva. METHODS: Three groups of 0.016 × 0.022 inch epoxy-coated NiTi orthodontic wires [Tooth tone coated NiTi (Ortho Technology, West Columbia, USA), EverWhite NiTi (American Orthodontics, Wisconsin, USA) and Nitanium Super Elastic Tooth Tone Plastic coated (Ortho Organizers, San Marcos, CA, USA)] were compared. Each group was subdivided into five as-received archwire specimens and five archwire specimens retrieved following immersion in artificial saliva for 28 days. Atomic force microscopy was used for analysis of average surface roughness (Sa). Hardness testing was performed using Digital Vickers hardness tester. ANOVA and Kruskal-Wallis tests were used for comparing the wire groups. RESULTS: The ranking of (Sa) values was as follows: Nitanium Ortho Organizers > Everwhite American Orthodontics > Tooth tone Ortho Technology (P > 0.05). Nitanium Ortho Organizers archwires showed significantly greater (Sa) than both other groups following immersion in saliva (P < 0.001). The coating hardness of as-received and post-immersion archwires from Tooth tone Ortho Technology was significantly lower than the other groups (P < 0.001). For all the three types of archwires, the mean hardness of immersed wires was significantly lower than that of the as-received archwires (P < 0.001). CONCLUSIONS: Esthetic coated archwires have shown unpleasant surface changes following exposure to artificial saliva. These surface changes are affected by physical characteristics such as surface roughness and hardness of the coating.

Mechanical Properties of 3D-Printed Occlusal Splint Materials.

Data regarding the mechanical properties of three-dimensionally (3D) printed materials for occlusal splint manufacturing are scarce. The aim of the present study was to evaluate the flexural strength and surface hardness of modern 3D-printed occlusal splint materials and compare them with two control groups, namely, milled and conventional cold-polymerized occlusal splint materials. A total of 140 rectangular specimens were manufactured for the present study. The specimens were prepared in accordance with the International Organization for Standardization standards (ISO 20795-1:2013). Five 3D-printed (NextDent Ortho Rigid, Dental LT Clear, Dentona Flexisplint, Cosmos Bite Splint, and ProArt Print Splint), one milled (ProArt CAD Splint), and one cold-polymerized (ProBase Cold) occlusal splint materials were used to determine flexural strength and surface hardness values. The three-point flexure test was used for the determination of flexural strength values, while Vickers hardness was measured to determine surface hardness. Ten specimens (n = 10) of each material were tested using these procedures. One-way ANOVA and Tukey's post-hoc test were used to analyze the obtained results (α = 0.05). The values of flexural strength ranged from 46.1 ± 8.2 MPa to 106 ± 8.3 MPa. The Vickers hardness values ranged from 4.9 ± 0.5 VHN to 20.6 ± 1.3 VHN. Significant differences were found among the tested materials (p < 0.0001). The milled and cold-polymerized materials yielded higher values for both flexural strength (only one 3D-printed resin had comparable results to cold-polymerized acrylics) and surface hardness. There are differences in the mechanical properties of the various tested occlusal splint materials. The flexural strength of most of the 3D-printed materials and their surface hardness values are still inferior when compared to the milled or cold-polymerized materials.

Effect of build angle, resin layer thickness and viscosity on the surface properties and microbial adhesion of denture bases manufactured using digital light processing.

OBJECTIVES: To investigate differences in the surface properties and microbial adhesion of denture base resins for digital light processing (DLP) with varying resin layer thicknesses (LT), build angles (BA), and resin viscosities. METHODS: Two denture base resins for DLP with different viscosities (high and low) were used to prepare disk specimens applying two manufacturing parameters: 1) LT (50 or 100 µm) and 2) BA (0-, 45-, and 90-degree). Surface roughness and contact angle values were measured on the test surfaces (n=10 per group). Streptococcus oralis and Candida albicans absorbance was measured to assess microorganism attachment (n=6 per group). A three-way analysis of variance (ANOVA) was conducted, considering the main effects and their interactions (viscosity, LT, and BA). Post-hoc multiple pairwise comparisons were performed. All data were analyzed at a level of significance (P) of 0.05. RESULTS: LT and BA significantly affected the surface roughness and contact angle of the specimens, depending on resin viscosity (P<.001). Absorbance measurement showed no significant interaction between the three factors (P>.05). However, significant interactions were observed between viscosity and BA (P<.05) and between LT and BA (P<.05). CONCLUSIONS: Regardless of the viscosity and LT, discs with a 0-degree BA showed the least roughness. High-viscosity specimens fabricated with a 0-degree BA had the lowest contact angle. Regardless of the LT and viscosity, discs with a 0-degree BA showed the lowest S. oralis attachment. Attachment of C. albicans was the least on the disk with 50 µm LT, irrespective of the viscosity. CLINICAL SIGNIFICANCE: Clinicians should consider the effects of LT and BA on surface roughness, contact angle, and microbial adhesion of DLP-generated dentures, which can differ depending on resin viscosity. A 50 µm LT and 0-degree BA can be used with a high-viscosity resin to fabricate denture bases with less microbial adhesion.

In vitro comparison of the physical and mechanical properties of an ormocer with an ormocer-based composite and a nanocomposite restorative material.

OBJECTIVES: To compare an ormocer with a first generation ormocer-based composite and a nanocomposite in terms of surface roughness, surface hardness, and microleakage. MATERIALS AND METHODS: An ormocer (Admira Fusion), a first generation ormocer-based composite (Admira) and a nanocomposite (Filtek Z350 XT) were prepared strictly in accordance with the manufacturer's instruction and recommendation to provide optimal material properties. Twelve disk samples of each material were evaluated to assess both surface roughness and surface hardness. For surface roughness, all samples were finished, polished, and Ra values measured with a profilometer. For surface hardness, samples were stored in an incubator, polished and a Vickers diamond indenter was used to record values. For microleakage, 36 standardized, Class V cavities were prepared and randomly divided into three groups. Restored teeth were thermally fatigued, immersed in 2% methylene blue solution for 48 h, sectioned, and scored for occlusal and gingival microleakage. RESULTS: Statistical significance was set at p < .05. The one-way analysis of variance identified no significant difference in terms of surface roughness between the three material groups (p > .05). A significantly higher surface hardness was identified for the nanocomposite compared to both the ormocer (p < .001) and ormocer-based composite (p < .001). Fisher's exact test identified no significant difference in terms of occlusal microleakage (p = .534) and gingival microleakage (p = .093) between the three material groups. CONCLUSIONS: No significant differences in terms of surface roughness or microleakage were noted. The nanocomposite was significantly harder than the ormocer materials.

Assessments performed on harder surfaces can misrepresent ACL injury risk.

Changes in surface hardness are likely to alter an athlete's movement strategy. Anterior cruciate ligament (ACL) injury risk assessments that are performed on a different surface to that used for training and competition may, therefore, not represent an athlete's on-field movement strategies. The aim of this study was to examine the influence of surface hardness on multidirectional field sport athletes' movement strategies in movements that are commonly used in ACL injury risk assessments (bilateral and unilateral drop jumps, and a cutting manoeuvre). Ground reaction forcesand three-dimensional lower limb kinematics were recorded from 19 healthy, male, multidirectional field sport athletes performing bilateral and unilateral drop jumps, and a 90° cutting task on Mondo track (harder surface) and artificial turf (softer surface). Continuous (statistical parametric mapping) and discrete analyses revealed alterations in vertical and horizontal braking forces and knee and hip moments between surfaces of different hardness in all three movements (p ≤ 0.05, d > 0.5). Injury risk assessments performed on a harder surface (e.g. Mondo track) can misrepresent an athlete's risk of ACL injury compared to the same movements performed on a softer more cushioned surface that is typically used for training and/or matches (e.g. artificial turf).

Surface hardness and flexural strength of dual-cured bulk-fill restorative materials after solvent storage.

BACKGROUND: This study aimed to evaluate the surface hardness (VHN) and biaxial flexural strength (BFS) of dual-cured bulk-fill restorative materials after solvent storage. METHODS: Two dual-cured bulk-fill composites (Surefil One® and Activa™ Bioactive), a light-cured bulk-fill composite (Filtek One Bulk-Fill) and a resin-modified glass ionomer (Fuji II LC) were investigated. Surefil One and Activa were used in the dual-cure mode, all materials were handled according to manufacturer's instructions. For VHN determination, 12 specimens were prepared from each material and measured after 1 h (baseline), 1 d, 7 d and 30 d of storage in either water or 75% ethanol-water. For BFS test, 120 specimens were prepared (n = 30/material) and stored in water for either 1, 7 or 30 d before testing. Repeated measures MANOVA, two-way and one-way ANOVA followed by the Tukey post hoc test (p ≤ 0.05) were used to analyze the data. RESULTS: Filtek One had the highest VHN, while Activa had the lowest. All materials exhibited a significant increase in VHN after 1d of storage in water, except for Surefil One. After 30 d of storage, VHN increased significantly in water except for Activa, while ethanol storage caused a significant time-dependent reduction in all tested materials (p ≤ 0.05). Filtek One showed the highest BFS values (p ≤ 0.05). All the materials, except for Fuji II LC, exhibited no significant differences between 1 and 30 d BFS measurements (p > 0.05). CONCLUSIONS: Dual-cured materials had significantly lower VHN and BFS compared to the light-cured bulk-fill material. The low results of Activa VHN and Surefil One BFS, indicate that these materials should not be recommended in posterior stress-bearing areas.

The Effects of Cross-Linking Agents on the Mechanical Properties of Poly (Methyl Methacrylate) Resin.

Cross-linking agents are incorporated into denture base materials to improve their mechanical properties. This study investigated the effects of various cross-linking agents, with different cross-linking chain lengths and flexibilities, on the flexural strength, impact strength, and surface hardness of polymethyl methacrylate (PMMA). The cross-linking agents used were ethylene glycol dimethacrylate (EGDMA), tetraethylene glycol dimethacrylate (TEGDMA), tetraethylene glycol diacrylate (TEGDA), and polyethylene glycol dimethacrylate (PEGDMA). These agents were added to the methyl methacrylate (MMA) monomer component in concentrations of 5%, 10%, 15%, and 20% by volume and 10% by molecular weight. A total of 630 specimens, comprising 21 groups, were fabricated. Flexural strength and elastic modulus were assessed using a 3-point bending test, impact strength was measured via the Charpy type test, and surface Vickers hardness was determined. Statistical analyses were performed using the Kolmogorov-Smirnov Test, Kruskal-Wallis Test, Mann-Whitney U Test, and ANOVA with post hoc Tamhane test (p ≤ 0.05). No significant increase in flexural strength, elastic modulus, or impact strength was observed in the cross-linking groups compared to conventional PMMA. However, surface hardness values notably decreased with the addition of 5% to 20% PEGDMA. The incorporation of cross-linking agents in concentrations ranging from 5% to 15% led to an improvement in the mechanical properties of PMMA.

Concentration-dependent effect of carboxymethyl chitosan amorphous calcium phosphate on the surface hardness of primary tooth enamel.

PURPOSE: To compare the effects of gels containing 2.5% and 5% carboxymethyl chitosan amorphous calcium phosphate (CMC-ACP) on the microhardness of primary tooth enamel. METHODS: Twenty-four tooth specimens were demineralized with 37% phosphoric acid and divided into four groups: an untreated control group, a positive control group treated with casein phosphopeptide amorphous calcium phosphate, and two groups treated with 2.5% and 5% CMC-ACP gel, respectively. The enamel surface hardness was then measured with a Vickers hardness tester. RESULTS: In terms of Vickers Hardness Number (VHN), the degree of alteration in tooth surface microhardness was 77.83 ± 13.44 in the 5% CMC-ACP group and 52 ± 6.93 in the 2.5% CMC-ACP group (P = 0.002). The inter-group difference in the surface hardness change was significant (P < 0.05). CONCLUSION: The 5% CMC-ACP gel increased the hardness of primary tooth enamel to a greater degree than the 2.5% CMC-ACP gel.

Mechanical Characteristics of Composite Resins Produced by Additive and Subtractive Manufacturing.

INTRODUCTION: The aim of the study was to evaluate the mechanical characteristics of resin composites produced by additive and subtractive manufacturing. METHODS: Six composite resin materials produced by subtractive (Vita Enamic-VE, Cerasmart-CE, Lava Ultimate-LU) and additive manufacturing (Varseo Smile Crown plus-VSC, Saremco Print Crowntec-SPC, Formlabs 3B Permanent crown-FLP) were selected. The three-point bending test was performed, and surface hardness of test specimens was measured. RESULTS: The flexural strength values of CE, SPC and LU test groups were found to be statistically higher when compared to VE, FLP and VSC test groups (p⟨0.0033). The modulus of elasticity values of the test specimens was listed as VE>LU>CE>SPC>FLP>VSC. The FLP group [35.11(4.46)] had the lowest surface hardness values, whereas the VE group [252.50 (21.5)] had the highest values. Other groups were listed as LU⟩CE⟩SPC⟩VSC in terms of surface hardness. CONCLUSIONS: According to the ISO 6872:2015, the flexural strengths of all resin composites were found to be acceptable for single unit fixed restorations. However, the VSC group's flexural strength is suitable for inlay, onlay, veneer restorations or single-unit anterior fixed dental prostheses. Also, VSC may not be a suitable choice for posterior restorations due to its low flexural strength.

Evaluating the effect of preheating on resin composites in pit-and-fissure caries treatments with a digital intraoral scanner.

OBJECTIVE: To evaluate the effect of preheating on the microleakage and surface hardness of resin composites in the treatment of pit-and-fissure caries with various widths, as measured by an intraoral scanner. METHODS: A total of 153 L-shaped cavities with different widths (1 mm, 1.6 mm and 2 mm) were prepared on the buccal or palatal/lingual surfaces of human molars. The cavities were measured in three dimensions by a TRIOS scanner and then filled with various resins (room temperature Z350 flowable resin and room temperature and 60 â„ƒ Z350 universal resin). Microleakage and gap formation at 2 sites were evaluated by stereomicroscopy and scanning electron microscope. Resin samples were prepared, and the top surface Vickers hardness (VHNtop) of all samples was measured at 1 day and 30 days postirradiation. RESULTS: No difference were observed in the 3D scans for the cavities sizes among groups with the same width. For the 1 mm-wide cavity, the lowest microleakage was obtained with the flowable group; for the 1.6 mm-wide cavity, the nonpreheating universal group showed the highest microleakage at site 1, and the preheating group exhibited lower microleakage than that of the nonpreheating universal group at site 2; and for the 2 mm-wide cavity, the preheating group presented lower microleakage at site 2. The gap formations were consistent with the microleakage degrees. The preheating group exhibited the highest VHNtop at 1 day and 30 days postirradiation. SIGNIFICANCE: A digital intraoral scanner could be used to scan the cavities in three dimensions. Preheating technology could reduce the microleakage of Z350 universal resin and enhance its surface hardness.

Mechanical and Biomimetic Characteristics of Bulk-Fill Resin Dental Composites Following Exposure in a Simulated Acidic Oral Environment.

During the last 10 years, various companies have marketed different "bulk-fill" resin dental composites for the restoration of posterior stress-bearing teeth; however, the impact of acidic conditions on these relatively newer materials has not been thoroughly investigated. Therefore, an attempt was made to evaluate the effect of acidic beverages on the mechanical biomimetic characteristics of four bulk-fill and one conventional nanohybrid resin-based dental composites (RBCs). The specimens of each RBC were stored in two acidic beverages namely 'Orange Juice' and 'Coca-Cola', whereas 'dry' and 'distilled water' storage of specimens served as controls. After 1 week of storage, flexural and surface hardness properties of specimens were determined using a universal testing machine and Vickers hardness tester, respectively. In general, the 'Coca-Cola' beverage caused the greatest degradation of flexural strength, flexural modulus, and surface hardness characteristics in all RBCs in contrast to the 'dry', 'distilled water' controls and 'Orange Juice' storage conditions. However, the overall mechanical biomimetic performance of nanohybrid RBCs was relatively better than all other bulk-fill RBCs and may, therefore, be considered a suitable candidate for the restoration of posterior stress-bearing permanent dentition.

Plasma Non-targeted Metabolomics Analysis of Yili Horses Raced on Tracks With Different Surface Hardness.

In this study, the plasma non-targeted metabolomics of Yili horses were characterized before and after exercise on tracks that differed in surface hardness to better understand exercise-related biochemical changes. Blood samples were obtained from eight trained Yili horses before and immediately after exercise. Samples were used for metabolomic analysis by ultra-performance liquid chromatography-Q-EXACTIVE mass spectrometry. In total, 938 significantly different metabolites involving sugar, lipid, and amino acid metabolism were detected in the plasma, with significant increases in glucose, glucoheptanoic acid, lactic acid, malic acid, and methylmalonic acid and significant decreases in creatinine, D-tryptophan, carnitine, and citric acid after exercise. Among these metabolites, acetylcarnitine, tuliposide, vitamin C, and methylmalonic acid showed regular changes in concentration after exercise on tracks that differed in surface hardness, providing new insights into equine exercise physiology. The findings indicated the potential of vitamin C and methylmalonic acid as novel biomarkers of equine locomotor injury.

Comparison of the mechanical properties and surface topography of as-received and as-retrieved Copper-Nickel-Titanium arch wires: An ex-vivo study.

AIM: The mechanical and surface characteristics of Copper NiTi wires following intraoral aging in an important topic. This ex-vivo study is designed to assess the three most important mechanical properties; torsional stiffness, 3-point bending and surface hardness of the as-received Copper NiTi orthodontic archwires and compare them to the retrieved ones. MATERIAL AND METHODS: In this study, 50 round CuNiTi (0.016 inch) and 50 rectangular (0.018×0.025 inch) CuNiTi orthodontic wires (American Orthodontics, Tanzo Copper Nickel Titanium, Sheboygan, WI) were tested. The groups were as follow: 25 as-received 0.016 inch round CuNiTi archwires (group 1), 25 as-retrieved 0.016 inch round CuNiTi archwires (group 2), 25 as-received 0.018×0.025 inch rectangular CuNiTi archwires (group 3), and 25 as-retrieved 0.018×0.025 inch rectangular CuNiTi archwires (group 4). The physical properties of all of the samples were examined using Vickers hardness, bending and torsional tests. The Kolmogorov-Smirnov test was applied to assess the normal distribution of data. An independent t-test was used to compare the variables between the groups. RESULTS: The results showed that the hardness does not significantly differ between the as-received and as-retrieved archwires in both 0.016 and 0.018×0.025 inch archwires (P< 0.05). The bending test of the round wires showed that the values of the activation forces in the as-received ones were significantly higher than those of the as-retrieved (P=0.00). The torsional and bending test results of rectangular wires showed that the amounts of forces exerted from the as-retrieved archwires were significantly higher than the new archwires (P=0.00). CONCLUSIONS: Round CuNiTi archwires could be retied in the succeeding visits. However, the bending activation that declines significantly should be took into consideration. On the other hand, since bending and torsion activation of CuNiTi rectangular archwires increased after intraoral use, these wires should be retied cautiously.