Sensors Layout Optimization Design of Rocket Sled Test System.

The rocket sled, as a ground dynamic test system, combines the characteristics of the wind tunnel test and the flight test. However, some practical factors, such as shock wave interference, ground effect, and high-intensity aerodynamic noise will cause serious interference and even failure of the uniformly distributed sensors during horizontal sliding in a wide speed range. The AGARD HB-2 standard model is employed as the payload to simulate the aerodynamic and aeroacoustic characteristics during the variable acceleration period, aiming to optimize the test sensors layout. It is observed that in the high Mach number flow fields, strong coupling behaviors among complex waves will occur. The peak of wake vortex strength will appear at 1.5 s and gradually diminish over time. In addition, when the vortex between the load and the booster is monitored, its position shifts forward in the subsonic stage, then gradually moves backward and expands in the supersonic stage. Acoustic directivity is pronounced at subsonic and transonic speeds, pointing towards 75° and 135° relative to the sliding speed, respectively. These results can provide technical support for sensor layout and high-precision testing in rocket sled tests.

Intraoperative assessment of cochlear nerve functionality in various vestibular schwannoma scenarios: Lessons learned.

The use of cochlear implants (CIs) is on the rise for patients with vestibular schwannoma (VS). Besides CI following tumor resection, new scenarios such as implantation in observed and/or irradiated tumors are becoming increasingly common. A significant emerging trend is the need of intraoperative evaluation of the functionality of the cochlear nerve in order to decide if a CI would be placed. The purpose of this paper is to explore the experience of a tertiary center with the application of the Auditory Nerve Test System (ANTS) in various scenarios regarding VS patients. The results are compared to that of the studies that have previously used the ANTS in this condition. Patients with unilateral or bilateral VS (NF2) who were evaluated with the ANTS prior to considering CI in a tertiary center between 2021 and 2023 were analyzed. The presence of a robust wave V was chosen to define a positive electrical auditory brainstem response (EABR). Two patients underwent promontory stimulation (PromStim) EABR previous to ANTS evaluation. Seven patients, 2 NF-2 and 5 with sporadic VS were included. The initial scenario was simultaneous translabyrinthine (TL) tumor resection and CI in 3 cases while a CI placement without tumor resection was planned in 4 cases. The ANTS was positive in 4 cases, negative in 2 cases, and uncertain in one case. Two patients underwent simultaneous TL and CI, 1 patient simultaneous TL and auditory brainstem implant, 3 patients posterior tympanotomy with CI, and 1 patient had no implant placement. In the 5 patients undergoing CI, sound detection was present. There was a good correlation between the PromStim and ANTS EABR. The literature research yielded 35 patients with complete information about EABR response. There was one false negative and one false positive case; that is, the 28 implanted cases with a present wave V following tumor resection had some degree of auditory perception in all but one case. The ANTS is a useful intraoperative tool to asses CI candidacy in VS patients undergoing observation, irradiation or surgery. A positive strongly predicts at least sound detection with the CI.

A panel of tetranucleotide STR markers as an alternative approach to forensic DNA identification of wolf and dog.

Commercial panels of microsatellite (STR) loci are focused on the use of DNA of the domestic dog (Canis lupus familiaris) and are often inapplicable for genotyping the DNA of the gray wolf (Canis lupus lupus). We propose a CPlex test system, including one hexa- and 12 tetranucleotide autosomal STR loci, as well as two sex loci, that is equally efficient in DNA identification of biological samples of the wolf and the dog. Analysis of molecular variance between samples revealed significant differentiation values (FST = 0.0784, p < 0.001), which allows to use the panel to differentiate wolf and dog samples. Population subdivision coefficients (θ-values) were calculated for each of the 13 STR loci of the developed test system. It was shown that the values of the genotype frequency for dogs and wolves, without and with considering the θ-value, differ by three orders of magnitude (for dogs 8.9 × 10-16 and 2.1 × 10-14 and for wolves 1.9 × 10-15 and 4.5 × 10-14, respectively). The use of population subdivision coefficients will allow to identify the most reliable results of an expert identification study and the power of exclusion provided by the STR loci of the CPlex test system makes it possible to achieve a reliable level of evidence in forensic DNA analysis of both wolves and dogs. The test system has been validated for use in forensic identification of the dog and wolf based on biological traces found at crime scenes, as well as for individual identification and establishing biological relationship of animals of these species.

Buoyancy of underground structures and pore water pressure conduction law in silty clay strata.

Based on the effective stress principle, indoor model tests were conducted in this study to calculate the buoyancy of an underground structure and determine the law of pore water pressure conduction in silty clay strata. A comprehensive underground structure-water-soil interaction test system was established with four-in-one features: Elimination of lateral friction, controllable water head, circulating water supply and drainage, and simulation of groundwater flow. Four- and seven-gradient buoyancy continuous monitoring tests were completed using fine sand and silty clay, respectively, to verify the reliability and accuracy of the test system. The hydrostatic pressure and seepage-hydrostatic process of the silty clay strata were simulated separately to investigate the buoyancy of the underground structure of the strata, the buoyancy reduction coefficient, and the pore water pressure conduction law. The results show the reliability and accuracy of the comprehensive test system for underground structure-water-soil interaction. The concept of "buoyancy starting intercept" is proposed based on this system, where the underground water level value should be the head of water supply minus the "buoyancy starting intercept" when calculating buoyancy in weak permeable layers. Under hydrostatic action, the groundwater is phreatic, deeper burial depths show greater magnitude of this discount. When the groundwater is confined, the water head reduction coefficient increases with increase in the burial depth or hydraulic gradient. Buoyancy calculations of an underground structure within the range of confined water should not be reduced in this case. Whether in a seepage or hydrostatic state, the pore water pressure in the silty clay layer is below the theoretical value. The results of this work may provide a theoretical basis for further analysis of the pore water pressure conduction law and buoyancy reduction mechanism of clay soils. We also may provide a theoretical reference for the development of innovative underground structure-water-soil interaction comprehensive test systems.

[Anti-motion Artifact Performance Test System for Ambulatory ECG Monitoring Equipment].

Anti-motion artifact is one of the most important properties of ambulatory ECG monitoring equipment. At present, there is a lack of standardized means to test the performance of anti-motion artifact. ECG simulator and special conductive leather are used to build the simulator, it is used to simulate human skin, to generate ECG signal input for the ECG monitoring equipment attached to it. The mechanical arm and fixed support are used to build a motion simulation system to fix the conductive leather. The mechanical arm is programmed to simulate various motion states of the human body, so that the ECG monitoring equipment can produce corresponding motion artifacts. The collected ECG signals are read wirelessly, observed, analyzed and compared, and the anti-motion artifact performance of ECG monitoring equipment is evaluated. The test results show that by artificially creating the small difference between the two groups of ambulatory ECG monitoring equipment, the system can accurately test the interference signals introduced under the conditions of controlled movement such as tension and torsion, and compare the advantages and disadvantages. The research shows that the test system can provide convenient and accurate verification means for the research of optimizing anti-motion interference.

The Effects of EEG Biofeedback Training on Visual Reaction Time in Judo Athletes.

The aim of the study was to expand the current knowledge on the effects of EEG biofeedback training on the reaction time of judo athletes, as well as to develop an optimal EEG training protocol in terms of the number of sessions and their duration that would significantly improve the reaction time of athletes. The study included 24 male athletes from the national team of the Polish Judo Association. The selected group was randomly divided into two subgroups: experimental and control. The study was conducted in four cycles varying in terms of frequency and duration of neurofeedback (NFB) sessions, both in the control and experimental groups. In the experimental group, each training cycle consisted of 15 sessions, followed by a four-week break. The effects of NFB training on the visual reaction time of judo athletes were evaluated using computerized simple and complex reaction time tests along with selected trials of the Vienna Test System (VTS). Following NFB training according to the theta/beta1 protocol, while maintaining appropriate duration and frequency of individual training sessions, statistically significant improvements in reaction times to visual stimuli of athletes, both in simple and complex tasks, were observed in the experimental group. No such changes were found in the control group. The greatest improvement in reaction times was observed in complex tasks, indicating the high effectiveness of EEG biofeedback training in enhancing this ability.

A domesticated photoautotrophic microbial community as a biofilm model system for analyzing the influence of plastic surfaces on invertebrate grazers in limnic environments.

The environmental fate of plastic particles in water bodies is influenced by microbial biofilm formation. Invertebrate grazers may be affected when foraging biofilms on plastics compared to biofilms on natural substrata but the mechanistic basis for these effects is unknown. For analyzing these effects in ecotoxicological assays stable and reproducible biofilm communities are required that are related to the environmental site of interest. Here, a defined biofilm community was established and used to perform grazing experiments with a freshwater snail. For this, snippets of different plastic materials were incubated in the photic zone of three different freshwater sites. Amplicon sequencing of biofilms formed on these snippets showed that the site of incubation and not the plastic material dominated the microbial community composition. From these biofilms, individual microbial strains as well as photoautotrophic consortia were isolated; these consortia consisted of heterotrophic bacteria that were apparently nourished by microalga. While biofilms formed by defined dual cultures of a microalga and an Alphaproteobacterium were not accepted by the snail P. fontinalis, a photoautotrophic consortium (Co_3) sustained growth and metabolism of this grazer. Amplicon sequencing revealed that consortium Co_3, which could be stably maintained on solid medium under photoautotrophic conditions, reproducibly formed biofilms of a defined composition on three different plastic materials and on glass surfaces. In conclusion, our study shows that the generation of domesticated photoautotrophic microbial communities is a valid novel approach for establishing laboratory ecotoxicological assays with higher environmental relevance than those based on defined microbiota.

Advancing chemical safety assessment through an omics-based characterization of the test system-chemical interaction.

Assessing chemical safety is essential to evaluate the potential risks of chemical exposure to human health and the environment. Traditional methods relying on animal testing are being replaced by 3R (reduction, refinement, and replacement) principle-based alternatives, mainly depending on in vitro test methods and the Adverse Outcome Pathway framework. However, these approaches often focus on the properties of the compound, missing the broader chemical-biological interaction perspective. Currently, the lack of comprehensive molecular characterization of the in vitro test system results in limited real-world representation and contextualization of the toxicological effect under study. Leveraging omics data strengthens the understanding of the responses of different biological systems, emphasizing holistic chemical-biological interactions when developing in vitro methods. Here, we discuss the relevance of meticulous test system characterization on two safety assessment relevant scenarios and how omics-based, data-driven approaches can improve the future generation of alternative methods.

Histone Methyltransferases as a New Target for Epigenetic Action of Vorinostat.

Epigenetic genome regulation during malignant cell transformation is characterized by the aberrant methylation and acetylation of histones. Vorinostat (SAHA) is an epigenetic modulator actively used in clinical oncology. The antitumor activity of vorinostat is commonly believed to be associated with the inhibition of histone deacetylases, while the impact of this drug on histone methylation has been poorly studied. Using HeLa TI cells as a test system allowing evaluation of the effect of epigenetically active compounds from the expression of the GFP reporter gene and gene knockdown by small interfering RNAs, we showed that vorinostat not only suppressed HDAC1, but also reduced the activity of EZH2, SUV39H1, SUV39H2, and SUV420H1. The ability of vorinostat to suppress expression of EZH2, SUV39H1/2, SUV420H1 was confirmed by Western blotting. Vorinostat also downregulated expression of SUV420H2 and DOT1L enzymes. The data obtained expand our understanding of the epigenetic effects of vorinostat and demonstrate the need for a large-scale analysis of its activity toward other enzymes involved in the epigenetic genome regulation. Elucidation of the mechanism underlying the epigenetic action of vorinostat will contribute to its more proper use in the treatment of tumors with an aberrant epigenetic profile.

Molecular Mechanisms of Tumor Cell Stemness Modulation during Formation of Spheroids.

Cancer stem cells (CSCs), their properties and interaction with microenvironment are of interest in modern medicine and biology. There are many studies on the emergence of CSCs and their involvement in tumor pathogenesis. The most important property inherent to CSCs is their stemness. Stemness combines ability of the cell to maintain its pluripotency, give rise to differentiated cells, and interact with environment to maintain a balance between dormancy, proliferation, and regeneration. While adult stem cells exhibit these properties by participating in tissue homeostasis, CSCs behave as their malignant equivalents. High tumor resistance to therapy, ability to differentiate, activate angiogenesis and metastasis arise precisely due to the stemness of CSCs. These cells can be used as a target for therapy of different types of cancer. Laboratory models are needed to study cancer biology and find new therapeutic strategies. A promising direction is three-dimensional tumor models or spheroids. Such models exhibit properties resembling stemness in a natural tumor. By modifying spheroids, it becomes possible to investigate the effect of therapy on CSCs, thus contributing to the development of anti-tumor drug test systems. The review examines the niche of CSCs, the possibility of their study using three-dimensional spheroids, and existing markers for assessing stemness of CSCs.

Cytogenetic Studies on Genoprotective Effect of Rosa damascena Mill. Hydrosol in Plant and Lymphocyte Test Systems.

Bulgarian Rosa damascena Mill. is has been known since ancient times for its high-quality oil, hydrosol, and other aromatic products. Rose hydrosol has various biological activities, but no research on its anticytotoxic/antigenotoxic effects exists. This study aimed to assess its defense potential against the genotoxin N-methyl-N'-nitro-N-nitrosoguanidine and to test its cytotoxic/genotoxic activity in plant and human lymphocyte test systems. Endpoints for cytotoxicity (mitotic index and nuclear division index) and genotoxicity (chromosome aberration and micronuclei) were used. Hydrosol was applied as a single treatment in concentrations ranging from 3% to 20% (4 h) to assess its cytotoxic and genotoxic effects. Its protective potential against MNNG was tested by applying an experimental scheme involving (i) conditioning treatment with non-toxic or slightly toxic concentrations of hydrosol, followed by genotoxin challenge (50 µg/mL) with a 4 h intertreatment time and (ii) treatment with hydrosol and mutagen with no time between the treatments. Hydrosol induces low cytotoxicity and clastogenicity, demonstrating cytoprotective/genoprotective effects against the mutagen in both applied test systems. The hydrosol defense potential was expressed by a more than twofold reduction in both chromosomal aberrations and micronuclei and by enhancing the mitotic activity compared with that of the mutagen, regardless of the experimental conditions. The results are promising for further hydrosol applications in pharmaceutical and medical practice.

False positive congenital cytomegalovirus saliva screening results with an FDA-approved assay at two institutions.

BACKGROUND: Congenital cytomegalovirus (CMV) infection is a significant cause of childhood hearing loss and developmental delay. Congenital CMV screening was implemented at two large hospital-affiliated laboratories using the FDA-approved Alethia CMV Assay Test System. In July 2022, an increase in suspected false-positive results was noted, leading to implementation of prospective quality management strategies. METHODS: The Alethia assay was performed per manufacturer-provided instructions on saliva swab specimens. After discovery of possible elevated false-positive rates, all positive results were confirmed by repeat Alethia testing on the same specimen, orthogonal polymerase chain reaction (PCR) on the same specimen, and/or clinical adjudication. Additionally, root cause analyses were conducted to pinpoint the source of false-positive results. RESULTS: At Cleveland Clinic (CCF), 696 saliva specimens were tested after initiation of the prospective quality management strategy, of which 36 (5.2%) were positive for CMV. Five of 36 (13.9%) were confirmed CMV positive by repeat Alethia testing and orthogonal PCR. Vanderbilt Medical Center (VUMC) tested 145 specimens, of which 11 (7.6%) were positive. Two of 11 (18.2%) confirmed as positive by orthogonal PCR or clinical adjudication. The remaining specimens (31 from CCF and 9 from VUMC) were negative for CMV by repeat Alethia and/or orthogonal PCR testing. DISCUSSION: These findings suggest a false positive rate of 4.5-6.2%, higher than the 0.2% reported for this assay in FDA claims. Laboratories using Alethia CMV may consider prospective quality management to evaluate all positive results. False-positive results can lead to unnecessary follow-up care and testing, and decreased confidence in laboratory testing.

Development of an Instantaneous Loading Impact Test System for Containment of a Nuclear Power Plant during Aircraft Impact on Steel Bar Joints.

As major projects such as nuclear power plants continuously increase, it is inevitable that loopholes will arise in safety precautions. Airplane anchoring structures, comprising steel joints and acting as a key component of such a major project, directly affect the safety of the project due to their resistance to the instant impact of an airplane. Existing impact testing machines have the limitations of being unable to balance impact velocity and impact force, as well as having inadequate control of impact velocity; they cannot meet the requirements of impact testing for steel mechanical connections in nuclear power plants. This paper discusses the hydraulic-based principle of the impact test system, adopts the hydraulic control mode, and uses the accumulator as the power source to develop an instant loading test system suitable for the entire series of steel joints and small-scale cable impact tests. The system is equipped with a 2000 kN static-pressure-supported high-speed servo linear actuator, a 2 × 22 kW oil pump motor group, a 2.2 kW high-pressure oil pump motor group, and a 9000 L/min nitrogen-charging accumulator group, which can test the impact of large-tonnage instant tensile loading. The maximum impact force of the system is 2000 kN, and the maximum impact rate is 1.5 m/s. Through the impact testing of mechanical connecting components using the developed impact test system, it was found that the strain rate of the specimen before failure was not less than 1 s-1, meeting the requirements of the technical specifications for nuclear power plants. By adjusting the working pressure of the accumulator group, the impact rate could be controlled effectively, thus providing a strong experimental platform for research in the field of engineering for preventing emergencies.

Corrigendum: Vestibular dysfunction is an important contributor to the aging of visuospatial ability in older adults-Data from a computerized test system.

[This corrects the article DOI: 10.3389/fneur.2022.1049806.].

A mesh microelectrode array for non-invasive electrophysiology within neural organoids.

Organoids are emerging in vitro models of human physiology. Neural models require the evaluation of functional activity of single cells and networks, which is commonly measured by microelectrode arrays. The characteristics of organoids clash with existing in vitro or in vivo microelectrode arrays. With inspiration from implantable mesh electronics and growth of organoids on polymer scaffolds, we fabricated suspended hammock-like mesh microelectrode arrays for neural organoids. We have demonstrated the growth of organoids enveloping these meshes and the culture of organoids on meshes for up to one year. Furthermore, we present proof-of-principle recordings of spontaneous electrical activity across the volume of an organoid. Our concept enables a new class of microelectrode arrays for in vitro models of three-dimensional electrically active tissue.

Reference data set for a Norwegian medium voltage power distribution system.

This article describes a reference data set for a representative Norwegian radial, medium voltage (MV) electric power distribution system operated at 22 kV. The data set is developed in the Norwegian research centre CINELDI and will in brief be referred to as the CINELDI MV reference system. Data for a real Norwegian distribution system were provided by a distribution grid company. The data have been anonymized and processed to obtain a simplified but still realistic grid model with 124 nodes. The first part of the data set describes the base version of the reference system that represents the present-day state of the grid, including information on topology, electrical parameters, and existing load points. The data set also comprises a load data set with load demand time series for a year with hourly resolution and scenarios for the possible long-term load development. These data describe an extended version of the reference system with information on possible new load points being added to the system in the future. A third part of the data set is data necessary for carrying out reliability of supply analyses for the system. The base version of the reference system described in this article can be extended to represent other types of distribution grids (e.g., with a ring topology). The reference grid can be used for assessing new methods and principles for distribution system operation and planning, including assessment of flexibility resources, active distribution grid measures, grid reinforcement planning, grid reinvestment planning, reliability of supply analysis, self-healing, etc.

Impact resistance test system for the helmet based on a polyvinylidene fluoride piezoelectric sensor array.

As the most commonly used personal protection equipment (PPE) in various production activities, the impact resistance of the helmet is of great importance. Referred to the conventional experimental method, this study constructs a helmet impact resistance test system with a polyvinylidene fluoride (PVDF) sensor array. Compared with the traditional test method, this study installed PVDF sensors on the contact surface between the headform and the helmet. The stress and its distribution on the headform are measured directly, which is helpful to evaluate the impact resistance of the helmet more accurately and comprehensively. Finally, the intra-group correlation coefficient (ICC) and the coefficient of variation (CV) of peak pressure of the repeated test results are calculated to evaluate the reliability of the test system, which shows high reliability. The test system is helpful for optimization of the helmet production design and further related research.

Investigation of radiation protective features of azadispiro derivatives and their genotoxic potential with Ames/Salmonella test system.

PURPOSE: Five different types of synthesized azadispiro derivatives have been analyzed for radiation absorption capacity and determined their potential to be exploited as substances for a drug to be developed against radiation has been investigated. MATERIAL AND METHODS: Fast neutron attenuation parameters like the effective mean free path, half-value layer (HVL), removal cross-sections, and neutron transmission number were found with the Monte Carlo simulation Geometry And Tracking (GEANT4) code. Gamma radiation absorption parameters, such as effective atom number (Zeff), mean free path (MFP), mass attenuation coefficient (MAC), and half-value layer (HVL) were theoretically determined with WinXCom software. Besides, the exposure build-up factor (EBF) was calculated by using GP fitting parameters. Neutron absorption dose rate was experimentally calculated with 241Am-Be fast neutron source which has 4.5 MeV of energy, 74 GBq activity, and portative BF3 neutron detector. Ames/Salmonella test systems were used for the genotoxic potentials of the azadispiro derivatives. RESULTS AND CONCLUSIONS: Experimental and theoretical results were checked with paraffin and High-Density Polyethylene. The results showed that Azadispiro derivatives have neutron radiation absorption capability close to paraffin and High-Density Polyethylene. The gamma radiation absorption properties for azadispiro derivatives have been investigated, and it has been observed that these materials can absorb gamma radiation. Ames/Salmonella assay was used to examine whether the derivatives had a genotoxic effect probability or not. The results showed that these derivatives were genotoxic and safe at test doses (up to 5 mM). Consequently, it has been understood that these azadispiro derivatives can be used as active and genotoxic safety ingredients in the production of a protective drug against both neutrons and gamma rays.

A hip disarticulation prostheses test system to simulate gait for prostheses evaluation.

BACKGROUND: The limited number of hip prostheses users makes it less feasible to conduct amputee tests for prosthesis development in the clinic, which restricts the development efficiency of the intelligent prostheses. OBJECTIVE: This study proposes a hip disarticulation prostheses test system (HDPTS) to supplement the amputee tests for hip disarticulation prosthesis (HDP) evaluation, which would potentially facilitate the prosthesis evaluation safety and development efficiency. METHODS: The hip trajectory of an individual with normal gait was acquired and reproduced by calculating the corresponding movement joint angle of a manipulator. Then, an HDP was fit on an amputee and on the HDPTS respectively to obtain the hip and knee joint angles of the HDP during walking. Comparing the root mean square error (RMSE) of the expected and planned trajectory, the joint angles between the amputee test and HDPTS test, to verify the feasibility and accuracy of the HDPTS for prosthesis evaluation. RESULTS: The RMSE between the expected and planned trajectory value was less than 1.20 mm (< 0.19%). The RMSE of the joint angles between the amputee test and HDPTS test were 2.18∘ (1.8%) and 3.13∘ (5.92%) for hip and knee joint respectively. CONCLUSION: The HDPTS was found accurate in hip trajectory reproduction and feasible in gait simulation for the prosthesis evaluation, which could potentially supplement the amputee test for prosthesis design thus improving prosthesis test safety and development efficiency.

Anti-motion Artifact Performance Test System for Ambulatory ECG Monitoring Equipment / 中国医疗器械杂志

Anti-motion artifact is one of the most important properties of ambulatory ECG monitoring equipment. At present, there is a lack of standardized means to test the performance of anti-motion artifact. ECG simulator and special conductive leather are used to build the simulator, it is used to simulate human skin, to generate ECG signal input for the ECG monitoring equipment attached to it. The mechanical arm and fixed support are used to build a motion simulation system to fix the conductive leather. The mechanical arm is programmed to simulate various motion states of the human body, so that the ECG monitoring equipment can produce corresponding motion artifacts. The collected ECG signals are read wirelessly, observed, analyzed and compared, and the anti-motion artifact performance of ECG monitoring equipment is evaluated. The test results show that by artificially creating the small difference between the two groups of ambulatory ECG monitoring equipment, the system can accurately test the interference signals introduced under the conditions of controlled movement such as tension and torsion, and compare the advantages and disadvantages. The research shows that the test system can provide convenient and accurate verification means for the research of optimizing anti-motion interference.