Effects of different tooth movement patterns and aligner thicknesses on maxillary arch expansion with clear aligners: a three-dimensional finite element study.

Objectives: The objective of this study was to investigate the biomechanical effects of different tooth movement patterns and aligner thicknesses on teeth and periodontal tissues during maxillary arch expansion with clear aligners, to facilitate more precise and efficient clinical orthodontic treatments. Methods: Three-dimensional models including teeth, maxilla, periodontal ligament, and aligner were constructed and subjected to finite element analysis. Tooth displacement trends and periodontal ligament stresses were measured for seven tooth displacement patterns (divided into three categories including overall movement of premolars and molars with gradually increasing molar expansion in each step; distributed movement of premolars and molars; and alternating movement between premolars and molars at intervals) and two aligner thicknesses (0.5 mm and 0.75 mm) during maxillary arch expansion with clear aligners. Results: When expanding the maxillary arch with clear aligners, the effective expansion of the target teeth mainly showed a tilting movement trend. Increasing the amount of molar expansion increased the buccal displacement of the first molar but decreased the buccal displacement of the premolars. The mean buccal displacement of the target teeth was greater in the posterior teeth interval alternating movement group (0.026 mm) than in the premolar/molar distributed movement group (0.016 mm) and the overall movement group (0.015 mm). Increasing aligner thickness resulted in greater buccal displacement of the crowns and increased stress on the periodontal ligaments. Conclusion: Increasing the amount of molar expansion reduces the efficiency of premolar expansion. Alternating movement of premolars and molars at intervals achieves a higher arch expansion efficiency, but attention should be paid to the anchorage of adjacent teeth. Increasing the thickness of the aligner increases the expansion efficiency but may also increase the burden on the periodontal tissues.

Medications and Orthodontic Tooth Movement: What Accelerates and Diminishes Tooth Movement?

The biological aspect of orthodontic tooth movement is influenced by the magnitude and duration of the applied force. This initiates signaling cascades essential for bone remodeling, which involve activating various cell signaling pathways that enhance the metabolism of the periodontal ligament, leading to localized bone resorption and deposition. This process facilitates tooth movement on the pressure side and promotes healing on the tension side. The remodeling associated with orthodontic tooth movement is an inflammatory reaction involving mediators. Key components in this process include hormones, systemic influences, cyclic adenosine monophosphate, specific cytokines like interleukin 1, colony-stimulating factors, calcium, collagenase, and prostaglandins, all of which are essential for the biological adjustments necessary for tooth movement. Medications that influence molecular pathways critical for the homeostasis of periodontal tissues or that affect changes during orthodontic tooth movement and clastic cell regulation can potentially modulate tooth movement. With the recent increase in prescription medication use, it is essential for clinicians to be aware of medication consumption in prospective patients and understand its potential impact on orthodontic treatment. This review aimed to explore the effects of commonly prescribed medications on the rate of orthodontic tooth movement, thoroughly review the existing evidence on this topic, and identify potential areas for future research.

Prevention of bone dehiscence associated with orthodontic tooth movement by prophylactic injection of bone anabolic agents in mice.

Although bone dehiscence may occur during orthodontic tooth movement into the narrow alveolar ridge, a non-invasive prevention method is yet to be fully established. We show for the first time prevention of bone dehiscence associated with orthodontic tooth movement by prophylactic injection of bone anabolic agents in mice. In this study, we established a bone dehiscence mouse model by applying force application and used the granular type of scaffold materials encapsulated with bone morphogenetic protein (BMP)-2 and OP3-4, the receptor activator of NF-κB ligand (RANKL)-binding peptide, for the prophylactic injection to the alveolar bone. In vivo micro-computed tomography revealed bone dehiscence with decreased buccal alveolar bone thickness and height after force application, whereas no bone dehiscence was observed with the prophylactic injection after force application, and alveolar bone thickness and height were kept at similar levels as those in the control group. Bone histomorphometry analyses revealed that both bone formation and resorption parameters were significantly higher in the injection with force application group than in the force application without the prophylactic injection group. These findings suggest that the prophylactic local delivery of bone anabolic reagents can prevent bone dehiscence with increased bone remodelling activity.

Extracellular Matrix Remodelling of the Periodontium under Orthodontic Force.

As the biological mechanisms of orthodontic tooth movement have been explored further, scholars have gradually focused on the remodelling mechanism of the extracellular matrix (ECM) in the periodontal ligament (PDL). The ECM of the PDL consists of various types of collagens and other glycoproteins. The specific process and mechanism of ECM remodelling during orthodontic tooth movement remains unclear. Collagen I and III, which constitute major components of the PDL, are upregulated under orthodontic force. The changes in the contents of ECM proteins also depend on the expression of ECM-related enzymes, which organise new collagen fibre networks to adapt to changes in tooth position. The matrix metalloproteinase family is the main enzyme that participates in collagen hydrolysis and renewal and changes its expression under orthodontic force. Moreover, ECM adhesion molecules, such as integrins, are also regulated by orthodontic force and participate in the dynamic reaction of cell adhesion and separation with the ECM. This article reviews the changes in ECM components, related enzymes and adhesion molecules in the PDL under orthodontic force to lay the foundation for the exploration of the regulatory mechanism of ECM remodelling during orthodontic tooth movement.

Novel approach for characterizing clinical load application of superelastic orthodontic wires.

OBJECTIVE: Current standardized in vitro bending experiments for orthodontic archwires cannot capture friction conditions and load sequencing during multi-bracket treatment. This means that clinically relevant forces exerted by superelastic wires cannot be predicted. To address these limitations, this study explored a novel test protocol that estimates clinical load range. METHODS: The correction of a labially displaced maxillary incisor was simulated using an in vitro model with three lingual brackets. Deflection force levels derived from four different protocols were designed to explore the impact of friction and wire load history. These force levels were compared in nickel-titanium (NiTi) archwires with three commonly used diameters. The unloading path varied between protocols, with single or multiple sequences and different load orders and initial conditions. RESULTS: Deflection forces from the new protocol, employing multiple continuous load/unload cycles (CCincr), consistently exceeded those from the conventional protocol using a single continuous unloading path (CUdecr). Mean differences in plateau force ranged from 0.54 N (Ø 0.014" wire) to 1.19 N (Ø 0.016" wire). The CCinr protocol also provided average force range estimates of 0.47 N (Ø 0.012" wire), 0.89 N (Ø 0.014" wire), and 1.15 N (Ø 0.016" wire). SIGNIFICANCE: Clinical orientation towards CUdecr carries a high risk of excessive therapeutic forces because clinical loading situations caused by friction and load history are underestimated. Physiological tooth mobility using NiTi wires contributes decisively to the therapeutic load situation. Therefore, only short unloading sequences starting from the maximum deflection in the load history, as in CCincr, are clinically meaningful.

Pain and root resorption due to surgical interventions to accelerate tooth movement in orthodontics: A systematic review and meta-analysis.

BACKGROUND: There are several publications that show the efficacy of surgical interventions in accelerating the rate of tooth movement in orthodontics. Consequently, possible adverse effects must also be evaluated. OBJECTIVES: The aim of the present study was to compare the perception of pain and root resorption between orthodontic treatment with a surgical acceleration intervention vs. conventional orthodontic treatment. MATERIAL AND METHODS: An electronic search was conducted in the MEDLINE, Scopus, Web of Science (WoS), ScienceDirect, Cochrane Library, and Virtual Health Library (VHL) databases up to September 12, 2022. Randomized or non-randomized, controlled, parallel-arm or split-mouth clinical trials were included. Fixed-and random-effects meta-analyses were performed with regard to heterogeneity. The risk of bias (RoB) was assessed using the RoB 2.0 and ROBINS-I tools. RESULTS: A total of 1,395 articles were initially retrieved, 40 studies were finally included in the review and 15 studies were eligible for quantitative analysis. The meta-analysis showed a significant difference in pain perception between acceleration surgery vs. conventional orthodontics at 24 h (p = 0.040); however, this difference was not significant at 7 days (p = 0.080). Overall, the patients who underwent any acceleration procedure presented significantly less resorption as compared to those who were applied conventional treatment (p < 0.001). A similar significant difference was found in retraction movements (p < 0.001) and alignment movements (p = 0.030). CONCLUSIONS: In the first 24 h, surgical interventions for the acceleration of tooth movement produce a greater perception of pain as compared to conventional orthodontic treatment, but the perception is similar after 7 days. Acceleration surgery results in less root resorption - in alignment movements, and especially in retraction movements.

Accelerated Orthodontic Treatment using Biomodulation: A Randomized Clinical Trial.

Background: Orthodontic treatment often spans several months or even years, which can be burdensome for patients. Biomodulation techniques have emerged as potential strategies to expedite orthodontic tooth movement. Materials and Methods: A randomized clinical trial was conducted with a sample of 60 orthodontic patients, aged 12-30 years, requiring fixed appliance therapy. Patients were randomly assigned to either the biomodulation group (n = 30) or the control group (n = 30). The biomodulation group received low-level laser therapy (LLLT) along with traditional orthodontic treatment, while the control group received conventional orthodontic treatment without LLLT. Treatment duration, pain perception, and orthodontic tooth movement were assessed during the study period. Results: The results demonstrated a significant reduction in treatment duration in the biomodulation group compared to the control group. The biomodulation group exhibited a 30% reduction in overall treatment time, with an average treatment duration of 8.4 months, while the control group required an average of 12 months (P < 0.001). Pain perception during orthodontic adjustments was lower in the biomodulation group. Additionally, biomodulation was associated with a statistically significant increase in the rate of tooth movement, as evidenced by a 20% reduction in the time required to achieve desired tooth alignment (P < 0.01). Conclusion: Biomodulation through low-level laser therapy represents a promising adjunct to traditional orthodontic treatment, significantly accelerating tooth movement and reducing treatment duration.

Evaluation of Dentist Perception of Platelet Rich Plasma (PRP) for Accelerated Tooth Movement - Cross Sectional Survey.

The current survey was conducted to assess the knowledge, awareness and perception of platelet-rich plasma (PRP) on accelerated tooth movement among dentist present in the state of Tamil Nadu. Tamil Nadu dentists were the subjects of the cross-sectional questionnaire survey. 500 participants completed self-administered questionnaires about their knowledge, awareness, and perception of PRP's effect on accelerated tooth movement. The Statistical Package for the Social Sciences (SPSS) (V 22.0) was used to do the statistical analysis. It computed the frequency distribution.The result showed that 466 (93.2%) had prior knowledge of PRP, whereas 34 (6.4%) had no previous experience with it. A total of 156 (31.2%) dentists were aware that PRP procedures are used for teeth rotation and canine retraction.15.2% of participants stated that PRP facilitates accelerated tooth movement.Therefore, results of the study show that the dentists were a little aware of PRP as an additional therapeutic strategy for accelerating tooth movement.More awareness required among the dentist regarding application and its benefits of PRP in accelerated tooth movement.

Accelarated Orthodontic Treatment Using Microosteoperforations: A Comparative Study.

Background: Accelerated orthodontic treatment has gained popularity in recent years as patients seek shorter treatment durations. Microosteoperforations (MOPs) have emerged as a minimally invasive technique to expedite tooth movement. This study aims to compare the effectiveness of MOPs in accelerating orthodontic treatment with conventional methods. Materials and Methods: A randomized controlled trial was conducted on 60 orthodontic patients requiring dental alignment. The participants were divided into two groups: Group A (MOPs) and Group B (conventional orthodontic treatment). In Group A, MOPs were performed at the beginning of the treatment. Both groups received monthly orthodontic adjustments. Treatment duration, rate of tooth movement, and patient discomfort were measured and compared between the two groups. Results: The study found that in Group A, the treatment duration was reduced by 30% compared to Group B (P < 0.05). The rate of tooth movement in the MOPs group was 1.5 times higher than the conventional group (P < 0.01). Additionally, patient-reported discomfort levels were similar between the two groups. No adverse events related to MOPs were observed during the study. Conclusion: MOPs significantly accelerate orthodontic treatment, reducing treatment duration by 30% and increasing the rate of tooth movement by 1.5 times compared to conventional methods. Importantly, MOPs are well-tolerated by patients, making them a valuable option for expediting orthodontic treatment with minimal discomfort. This study highlights the potential benefits of integrating MOPs into orthodontic practice to improve treatment efficiency and patient satisfaction.

Conservative enucleation for physiologic space closure in adenomatoid odontogenic tumor.

Adenomatoid odontogenic tumor (AOT) is a rare, asymptomatic, slow-growing benign tumor that can be divided into three variants: follicular, extrafollicular, and peripheral. By treating AOT using an enucleation and curettage approach, recurrence can be avoided. We report a case of a 24-year-old female who presented with a lump in the right mandibular premolar area along with diastema between displaced teeth #43 and #44 and was diagnosed with extrafollicular AOT. The patient was managed with enucleation-curettage surgery without additional bone graft procedure along with routine follow-up. A successful outcome without recurrence was achieved, and diastema closure with repositioning of the displaced teeth did not require orthodontic treatment. AOT should be managed via enucleation and curettage to obtain successful outcomes without recurrence. Spontaneous bone regeneration following enucleation can be achieved without guided bone regeneration. Also, diastema closure and repositioning of displaced teeth can occur without orthodontic interventions through physiologic drift.

Effects of different intrusion patterns during anterior teeth retraction using clear aligners in extraction cases: an iterative finite element analysis.

Background: Overtreatment design of clear aligner treatment (CAT) in extraction cases is currently primarily based on the clinical experience of orthodontists and is not supported by robust evidence on the underlying biomechanics. This study aimed to investigate the biomechanical effects of overtreatment strategies involving different maxillary anterior teeth intrusion patterns during anterior teeth retraction by CAT in extraction cases. Materials and methods: A finite element model of the maxillary dentition with the first premolar extracted was constructed. A loading method of clear aligners (CAs) based on the initial state field was proposed. The iterative method was used to simulate the long-term orthodontic tooth movement under the mechanical load exerted by the CAs. Three groups of CAs were utilized for anterior teeth retraction (G0: control group; G1: incisors intrusion group; G2: anterior teeth intrusion group). Tooth displacement and occlusal plane rotation tendency were analyzed. Results: In G0, CAT caused lingual tipping and extrusion of the incisors, distal tipping and extrusion of the canines, mesial tipping, and intrusion of the posterior teeth. In G1, the incisors showed minimal extrusion, whereas the canines showed increased extrusion and distal tipping tendency. G2 showed the smallest degree of posterior occlusal plane angle rotation, while the inclination tendency of the canines and second premolars decreased. Conclusion: 1. In CAT, tooth displacement tendency may change with increased wear time. 2. During anterior teeth retraction, the incisor intrusion pattern can provide effective vertical control for the lateral incisors but has little effect on the central incisors. Anterior teeth intrusion patterns can alleviate the inclination of canines and second premolars, resulting in partial relief of the roller-coaster effect.

miR-20a: a key regulator of orthodontic tooth movement via BMP2 signaling pathway modulation.

AIM: In this study, we aimed to establish a rat tooth movement model to assess miR-20's ability in enhancing the BMP2 signaling pathway and facilitate alveolar bone remodeling. METHOD: 60 male SD rats had nickel titanium spring devices placed between their left upper first molars and incisors, with the right side serving as the control. Forces were applied at varying durations (18h, 24h, 30h, 36h, 42h, 1d, 3d, 5d, 7d, 14d), and their bilateral maxillary molars and surrounding alveolar bones were retrieved for analysis. Fluorescent quantitative PCR was conducted to assess miR-20a, BMP2, Runx2, Bambi and Smad6 gene expression in alveolar bone, and western blot was performed to determine the protein levels of BMP2, Runx2, Bambi, and Smad6 after mechanical loading. RESULT: We successfully established an orthodontic tooth movement model in SD rats and revealed upregulated miR-20a expression and significantly increased BMP2 and Runx2 gene expression and protein synthesis in alveolar bone during molar tooth movement. Although Bambi and Smad6 gene expression did not significantly increase, their protein synthesis was found to decrease significantly. CONCLUSION: MiR-20a was found to be involved in rat tooth movement model alveolar bone remodeling, wherein it promoted remodeling by reducing Bambi and Smad6 protein synthesis through the BMP2 signaling pathway.

An Evaluation of the Rate and Type of Orthodontic Tooth Movement When Injecting Platelet-Rich Plasma During Mini-Implant-Based Segmented en-Masse Retraction of Upper Anterior Teeth.

INTRODUCTION: The study aimed to determine the influence of palatal injection of platelet-rich plasma (PRP) on the rate and type of orthodontic tooth movement (OTM) during the en-masse retraction of upper anterior teeth. MATERIALS AND METHODS: Two-arm parallel-group trial, in which 30 class II division 1 adult patients (7 males and 23 females) aged 16 to 27 years were recruited. The sample was randomly divided into two groups: the experimental group, in which PRP was injected in the palatal mucosa of the maxillary six anterior teeth immediately before starting the en-masse retraction of upper anterior teeth, whereas in the control group, traditional treatment was employed. Following the first premolar extraction, space closure was accomplished using frictionless mechanics for the en-masse retraction of upper anterior teeth. In both groups, a rigid segmented arch made of stainless steel with a diameter of 0.021 x 0.025 inch and an 8-mm power arm was used for the upper anterior teeth, and mini-implants were inserted between the upper second premolar and first molar at 8 mm apical from the archwire line. NiTi coil springs were used for retraction. Measurements were recorded at the onset of space closure (T0) and every 40 days till the middle of the en-masse retraction of upper anterior teeth (T1). RESULTS: Thirty patients completed the trial, and no patients were lost to follow-up in both groups. The OTM rate in the PRP group was similar to that of the control group (P = 0.596). The upper anterior teeth in the two groups were retracted mostly by controlled tipping and partially by translation. Statistically insignificant differences were observed between the two groups regarding the rest of the cephalometric variables. No serious harms were observed in either group. CONCLUSIONS: PRP was ineffective in accelerating the OTM rate during the en-masse retraction of upper anterior teeth and it did not affect the type of tooth movement.

Effect of thermomechanical ageing on force transmission by orthodontic aligners made of different thermoformed materials: An experimental study.

OBJECTIVES: Investigating the impact of thermal and mechanical loading on the force generation of orthodontic aligners made from various thermoplastic materials and different compositions. MATERIALS AND METHODS: Five distinct materials were utilized including, three multi-layer (Zendura FLX, Zendura VIVA, CA Pro) and two single-layer (Zendura A and Duran). A total of 50 thermoformed aligners (n = 10) underwent a 48-hour ageing protocol, which involved mechanical loading resulting from a 0.2 mm facial malalignment of the upper right central incisor (Tooth 11) and thermal ageing through storage in warm distilled water at 37°C. The force exerted on Tooth 11 of a resin model was measured both before and after ageing using pressure-sensitive films and a biomechanical setup. RESULTS: Before ageing, pressure-sensitive films recorded normal contact forces ranging from 83.1 to 149.7 N, while the biomechanical setup measured resultant forces ranging from 0.1 to 0.5 N, with lingual forces exceeding facial forces. Multi-layer materials exhibited lower force magnitudes compared to single-layer materials. After ageing, a significant reduction in force was observed, with some materials experiencing up to a 50% decrease. Notably, multi-layer materials, especially Zendura VIVA, exhibited lower force decay. CONCLUSIONS: The force generated by aligners is influenced by both the aligner material and the direction of movement. Multi-layer materials exhibit superior performance compared to single-layer materials, primarily because of their lower initial force, which enhances patient comfort, and their capability to maintain consistent force application even after undergoing ageing.

Evaluating the efficacy of platelet-rich plasma on orthodontic tooth movement rate: A systematic review and meta-analysis.

BACKGROUND: The main objective of this study was to evaluate the effect of autologous platelet-rich plasma (PRP) on acceleration of the orthodontic tooth movement and assess the evidence based on the available literature. METHODS: The trial was registered and reported according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Electronic databases including PubMed, Cochrane, Scopus, Central Register of Controlled Trials, and Google Scholar were searched for randomized controlled studies of PRP on the rate of tooth movement. The search was restricted to articles published in English between January 2000 to 31 December 2023. The search was completed by two reviewers independently and the risk of bias was evaluated using the Cochrane Risk of Bias tool (RoB 2.0) and meta-analysis was performed. Grading of Recommendations Assessment, Development, and Evaluation (GRADE) was done to determine the certainty of evidence. RESULTS: Thirteen studies were included in the systematic review and 10 were included in the quantitative analysis. A random-effects model for meta-analysis of seven studies evaluating the rate of canine retraction revealed a statistically significant increase in the rate of orthodontic tooth movement of 0.38 mm/month in 1 month (121 patients; 95% confidence interval [CI] 0.27-0.49; I2 = 35%; P < 0.001) which decreased to 0.09mm/month in the fourth month (80 patients; 95% CI 0.02-0.17; I2 = 0%; P < 0.02). Three studies that considered en masse retraction revealed a mean difference of 0.36mm over 3 months (40 patients; 95% CI -0.23 to 0.94; I2 = 74%; P < 0.23). CONCLUSIONS: The study suggests that PRP application can accelerate tooth movement, but its effects decreased over 4 months. The results should be interpreted cautiously due to the study's inherent limitations.

Low-intensity pulsed ultrasound promotes the osteogenesis of mechanical force-treated periodontal ligament cells via Piezo1.

Background: Low-intensity pulsed ultrasound (LIPUS) can accelerate tooth movement and preserve tooth and bone integrity during orthodontic treatment. However, the mechanisms by which LIPUS affects tissue remodeling during orthodontic tooth movement (OTM) remain unclear. Periodontal ligament cells (PDLCs) are pivotal in maintaining periodontal tissue equilibrium when subjected to mechanical stimuli. One notable mechano-sensitive ion channel, Piezo1, can modulate cellular function in response to mechanical cues. This study aimed to elucidate the involvement of Piezo1 in the osteogenic response of force-treated PDLCs when stimulated by LIPUS. Method: After establishing rat OTM models, LIPUS was used to stimulate rats locally. OTM distance and alveolar bone density were assessed using micro-computed tomography, and histological analyses included hematoxylin and eosin staining, tartrate-resistant acid phosphatase staining and immunohistochemical staining. GsMTx4 and Yoda1 were respectively utilized for Piezo1 functional inhibition and activation experiments in rats. We isolated human PDLCs (hPDLCs) in vitro and evaluated the effects of LIPUS on the osteogenic differentiation of force-treated hPDLCs using real-time quantitative PCR, Western blot, alkaline phosphatase and alizarin red staining. Small interfering RNA and Yoda1 were employed to validate the role of Piezo1 in this process. Results: LIPUS promoted osteoclast differentiation and accelerated OTM in rats. Furthermore, LIPUS alleviated alveolar bone resorption under pressure and enhanced osteogenesis of force-treated PDLCs both in vivo and in vitro by downregulating Piezo1 expression. Subsequent administration of GsMTx4 in rats and siPIEZO1 transfection in hPDLCs attenuated the inhibitory effect on osteogenic differentiation under pressure, whereas LIPUS efficacy was partially mitigated. Yoda1 treatment inhibited osteogenic differentiation of hPDLCs, resulting in reduced expression of Collagen Ⅰα1 and osteocalcin in the periodontal ligament. However, LIPUS administration was able to counteract these effects. Conclusion: This research unveils that LIPUS promotes the osteogenesis of force-treated PDLCs via downregulating Piezo1.

A narrative review of the effects of vitamin D3 on orthodontic tooth movement: Focus on molecular and cellular mechanisms.

Orthodontic tooth movement (OTM) is a critical process in dental alignment, driven by the application of calibrated orthodontic forces. This study delves into the intricate molecular and cellular mechanisms by which vitamin D3 influences OTM. Vitamin D3 is identified as a critical regulator in bone metabolism, enhancing osteoblast activity and bone formation while also modulating osteoclast quantity and RANKL expression, essential for the remodeling of the alveolar bone. The precise mechanisms through which vitamin D3 facilitates these processes are explored, highlighting its potential in accelerating bone remodeling and, consequently, tooth alignment. This comprehensive review underscores vitamin D3's anabolic impact on bone metabolism and its pivotal role in the synthesis and mineralization processes governed by osteoblasts. The findings illuminate vitamin D3's promise in augmenting orthodontic therapy, suggesting its utility in improving treatment efficiency and reducing duration. However, the need for further research into the optimal application of vitamin D3 in orthodontics is emphasized, particularly concerning dosage, timing, and delivery methods.

Small nucleolar RNA host gene 5 plays a role in orthodontic tooth movement by inhibiting osteoclast differentiation.

BACKGROUND AND OBJECTIVES: The alveolar bone remodelling promoted by reasonable mechanical force triggers orthodontic tooth movement (OTM). The generation of osteoclasts is essential in this process. However, the mechanism of mechanical force mediating osteoclast differentiation remains elusive. Small nucleolar RNA host gene 5 (SNHG5), which was reported to mediate the osteogenic differentiation of bone marrow mesenchymal stem cells in our previous study, was downregulated in human periodontal ligament cells (hPDLCs) under mechanical force. At the same time, the RANKL/OPG ratio increased. Based on this, we probed into the role of SNHG5 in osteoclast formation during OTM and the relevant mechanism. MATERIALS AND METHODS: SNHG5 and the RANKL/OPG ratio under different compressive forces were detected by western blotting (WB) and qRT-PCR. Impact of overexpression or knockdown of SNHG5 on osteoclast differentiation was detected by qRT-PCR, WB and transwell experiments. The combination of SNHG5 and C/EBPß was verified by RNA immunoprecipitation and RNA pull-down assays. The expression of SNHG5 and osteoclast markers in gingiva were analysed by qRT-PCR and the paraffin sections of periodontal tissues were used for histological analysis. RESULTS: Compressive force downregulated SNHG5 and upregulated the RANKL/OPG ratio in hPDLCs. Overexpression of SNHG5 inhibited RANKL's expression and osteoclast differentiation. SNHG5 combined with C/EBPß, a regulator of osteoclast. The expression of SNHG5 in periodontal tissue decreased during OTM. CONCLUSION: SNHG5 inhibited osteoclast differentiation during OTM, achieved by affecting RANKL secretion, which may provide a new idea to interfere with bone resorption during orthodontic treatment.

Macrophage M2 polarization promotes pulpal inflammation resolution during orthodontic tooth movement.

Mechanical force induces hypoxia in the pulpal area by compressing the apical blood vessels of the pulp, triggering pulpal inflammation during orthodontic tooth movement. However, this inflammation tends to be restorable. Macrophages are recognized as pivotal immunoreactive cells in the dental pulp. Whether they are involved in the resolution of pulpal inflammation in orthodontic teeth remains unclear. In this study, we investigated macrophage polarization and its effects during orthodontic tooth movement. It was demonstrated that macrophages within the dental pulp polarized to M2 type and actively participated in the process of pulpal inflammation resolution. Inflammatory reactions were generated and vascularization occurred in the pulp during orthodontic tooth movement. Macrophages in orthodontic pulp show a tendency to polarize towards M2 type as a result of pulpal hypoxia. Furthermore, by blocking M2 polarization, we found that macrophage M2 polarization inhibits dental pulp-secreting inflammatory factors and enhances VEGF production. In conclusion, our findings suggest that macrophages promote pulpal inflammation resolution by enhancing M2 polarization and maintaining dental health during orthodontic tooth movement.

NF-κB Decoy Oligodeoxynucleotide-Loaded Poly Lactic-co-glycolic Acid Nanospheres Facilitate Socket Healing in Orthodontic Tooth Movement.

Orthodontic space closure following tooth extraction is often hindered by alveolar bone deficiency. This study investigates the therapeutic use of nuclear factor-kappa B (NF-κB) decoy oligodeoxynucleotides loaded with polylactic-co-glycolic acid nanospheres (PLGA-NfDs) to mitigate alveolar bone loss during orthodontic tooth movement (OTM) following the bilateral extraction of maxillary first molars in a controlled experiment involving forty rats of OTM model with ethics approved. The decreased tendency of the OTM distance and inclination angle with increased bone volume and improved trabecular bone structure indicated minimized alveolar bone destruction. Reverse transcription-quantitative polymerase chain reaction and histomorphometric analysis demonstrated the suppression of inflammation and bone resorption by downregulating the expression of tartrate-resistant acid phosphatase, tumor necrosis factor-α, interleukin-1ß, cathepsin K, NF-κB p65, and receptor activator of NF-κB ligand while provoking periodontal regeneration by upregulating the expression of alkaline phosphatase, transforming growth factor-ß1, osteopontin, and fibroblast growth factor-2. Importantly, relative gene expression over the maxillary second molar compression side in proximity to the alveolus highlighted the pharmacological effect of intra-socket PLGA-NfD administration, as evidenced by elevated osteocalcin expression, indicative of enhanced osteocytogenesis. These findings emphasize that locally administered PLGA-NfD serves as an effective inflammatory suppressor and yields periodontal regenerative responses following tooth extraction.