Fluorine Substitution of TCNQ Alters the Redox-Driven Catalytic Pathway for the Ferricyanide-Thiosulfate Reaction.

Mechanistic variation in catalysis through substituent-based redox tuning is well established. Fluorination of TCNQ (TCNQ=tetracyanoquinodimethane) provides ~850 mV variation in the redox potentials of the TCNQF n 0 / 1 - ${{{\rm {TCNQF}}}_{{\rm {n}}}^{{\rm {0/1-}}}}$ and TCNQF n 1 - / 2 - ${{{\rm {TCNQF}}}_{{\rm {n}}}^{{\rm {1-/2-}}}}$ (n=0, 2, 4) processes. With TCNQF 4 1 - ${{{\rm {TCNQF}}}_{{\rm {4}}}^{{\rm {1-}}}}$ , catalysis of the kinetically very slow ferrocyanide-thiosulfate redox reaction in aqueous solution occurs via a mechanism in which the catalyst TCNQF 4 1 - ${{{\rm {TCNQF}}}_{{\rm {4}}}^{{\rm {1-}}}}$ is reduced to TCNQF 4 2 - ${{{\rm {TCNQF}}}_{{\rm {4}}}^{{\rm {2-}}}}$ when reacting with S 2 O 3 2 - ${{{\rm {S}}}_{{\rm {2}}}{{\rm {O}}}_{{\rm {3}}}^{{\rm {2-}}}}$ which is oxidised to S 4 O 6 2 - ${{{\rm {S}}}_{{\rm {4}}}{{\rm {O}}}_{{\rm {6}}}^{{\rm {2-}}}}$ . Subsequently, TCNQF 4 2 - ${{{\rm {TCNQF}}}_{{\rm {4}}}^{{\rm {2-}}}}$ reacts with [ Fe ( CN ) 6 ]​ 3 - ${{{\rm {[Fe(CN)}}}_{{\rm {6}}}{{\rm {]}}}^{{\rm {3-}}}}$ to form [ Fe ( CN ) 6 ]​ 4 - ${{{\rm {[Fe(CN)}}}_{{\rm {6}}}{{\rm {]}}}^{{\rm {4-}}}}$ and reform the TCNQF 4 1 - ${{{\rm {TCNQF}}}_{{\rm {4}}}^{{\rm {1-}}}}$ catalyst, in another thermodynamically favoured process. An analogous mechanism applies with TCNQF 2 1 - ${{{\rm {TCNQF}}}_{{\rm {2}}}^{{\rm {1-}}}}$ as a catalyst. In contrast, since the reaction of S 2 O 3 2 - ${{{\rm {S}}}_{{\rm {2}}}{{\rm {O}}}_{{\rm {3}}}^{{\rm {2-}}}}$ with TCNQ 1 - ${{{\rm {TCNQ}}}^{{\rm {1-}}}}$ is thermodynamically unfavourable, an alternative mechanism is required to explain the catalytic activity observed in this non-fluorinated system. Here, upon addition of TCNQ 1 - ${{{\rm {TCNQ}}}^{{\rm {1-}}}}$ , reduction of [ Fe ( CN ) 6 ]​ 3 - ${{{\rm {[Fe(CN)}}}_{{\rm {6}}}{{\rm {]}}}^{{\rm {3-}}}}$ to [ Fe ( CN ) 6 ]​ 4 - ${{{\rm {[Fe(CN)}}}_{{\rm {6}}}{{\rm {]}}}^{{\rm {4-}}}}$ occurs with concomitant oxidation of TCNQ 1 - ${{{\rm {TCNQ}}}^{{\rm {1-}}}}$ to TCNQ 0 ${{{\rm {TCNQ}}}^{{\rm {0}}}}$ , which then acts as the catalyst for S 2 O 3 2 - ${{{\rm {S}}}_{{\rm {2}}}{{\rm {O}}}_{{\rm {3}}}^{{\rm {2-}}}}$ oxidation. Thermodynamic data explain the observed differences in the catalytic mechanisms. CuTCNQF n ${{{\rm {CuTCNQF}}}_{{\rm {n}}}}$ (n=0, 4) also act as catalysts for the ferricyanide-thiosulfate reaction in aqueous solution. The present study shows that homogeneous pathways are available following addition of these dissolved materials. Previously, these CuTCNQF n ${{{\rm {CuTCNQF}}}_{{\rm {n}}}}$ (n=0, 4) coordination polymers have been regarded as insoluble in water and proposed as heterogeneous catalysts for the ferricyanide-thiosulfate reaction. Details and mechanistic differences were established using UV-visible spectrophotometry and cyclic voltammetry.

Development and validation of a simple method for the determination of triamcinolone acetonide in nasal spray.

A rapid, convenient, and sensitive analytical technique for quantitative analysis of triamcinolone acetonide (TAC) in pharmaceutical nasal spray dosage form using the blue tetrazolium colorimetric reaction and UV spectrophotometric method was developed and validated. Beer's law of the developed method was proven in the concentration range of 10-40 µg/mL and showed a specific linear relationship with coefficient value R2 = 0.998. The LOQ level was 9.99 µg/mL, with (RSD = 0.26%). From precision assay, RSD values have been obtained for the repeatability and intermediate precision, which were found to be (RSD = 1.65%) and (RSD = 2.01%), respectively, indicating that the method is reproducible. Recovery studies showed mean recoveries in the range of (100.08-103.65 %), meeting the acceptance criteria for accuracy. In addition, we compared the results of the developed method UV-Vis spectrophotometric procedure with those of a well-established official USP analytical procedure (HPLC), and the results showed good agreement. The proposed UV method represents a potential alternative to the official USP analytical assay procedure (HPLC) for estimating TAC in nasal spray forms. Furthermore, it has the potential to be implemented in routine use for rapid qualitative and quantitative determinations for TAC.

Measuring Enzyme Kinetics of Glycoside Hydrolases Using the 3,5-Dinitrosalicylic Acid Assay.

Use of the 3,5-dinitrosalicylic acid reagent allows the simple, rapid quantification of reducing sugars. The method can be used for analysis of biological samples or in characterization of enzyme reactions, as new reducing ends are generated when a polysaccharide substrate undergoes hydrolytic cleavage. Presented here is an application of the method in measuring the kinetics of a glycoside hydrolase reaction, including the optimization of the DNSA reagent, and the production of a standard curve of absorbance versus sugar concentration.

Revisiting the TCNQF4 0/1-/2- Catalysis Mechanism for the [Fe(CN)6 ]3-/4- -S2 O3 2- /S4 O6 2- Redox Reaction.

Published data suggest that sparingly soluble metal complexes of TCNQF n 1 - ${{\rm{TCNQF}}_{\rm{n}}^{{\rm{1 - }}} }$ , where n=0, 1, 2, 4, can act as heterogeneous catalysts for the kinetically very slow [ Fe ( CN ) 6 ]​ 3 - / 4 - ${{\rm{[Fe(CN)}}_{\rm{6}} {\rm{]}}^{{\rm{3 - /4 - }}} }$ - S 2 O 3 2 - ${{\rm{S}}_{\rm{2}} {\rm{O}}_{\rm{3}}^{{\rm{2 - }}} }$ / S 4 O 6 2 - ${{\rm{S}}_{\rm{4}} {\rm{O}}_{\rm{6}}^{{\rm{2 - }}} }$ reaction in aqueous solution. This study shows that the coordination polymer CuTCNQF 4 ${{\rm{CuTCNQF}}_{\rm{4}} }$ , participates as a homogeneous catalyst via an extremely small concentration of dissolved TCNQF 4 1 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ . This finding suggests that the generally accepted mechanism of catalysis by TCNQF 4 ${{\rm{TCNQF}}_{\rm{4}} }$ based solids needs to be revisited to ascertain the role of homogeneous pathways. In the present study, UV-visible spectrophotometry was used to examine the catalysis of the aqueous redox reaction of [ Fe ( CN ) 6 ]​ 3 - ${{\rm{[Fe(CN)}}_{\rm{6}} {\rm{]}}^{{\rm{3 - }}} }$ (1.0 mM) with S 2 O 3 2 - ${{\rm{S}}_{\rm{2}} {\rm{O}}_{\rm{3}}^{{\rm{2 - }}} }$ (100 mM) in the presence of (i) a precursor catalyst, TCNQF 4 0 ${{\rm{TCNQF}}_{\rm{4}}^{\rm{0}} }$ ; (ii) the catalyst, TCNQF 4 1 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ , as the water soluble Li+ salt; and (iii) CuTCNQF 4 ${{\rm{CuTCNQF}}_{\rm{4}} }$ . A homogeneous reaction scheme that utilises the TCNQF 4 1 - / 2 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - /2 - }}} }$ couple is provided. In the case of TCNQF 4 1 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ derived from highly soluble LiTCNQF 4 ${{\rm{LiTCNQF}}_{\rm{4}} }$ , quantitative conversion of 1.0 mM S 2 O 3 2 - ${{\rm{S}}_{\rm{2}} {\rm{O}}_{\rm{3}}^{{\rm{2 - }}} }$ to 0.50 mM S 4 O 6 2 - ${{\rm{S}}_{\rm{4}} {\rm{O}}_{\rm{6}}^{{\rm{2 - }}} }$ occurs with complete reduction of [ Fe ( CN ) 6 ]​ 3 - ${{\rm{[Fe(CN)}}_{\rm{6}} {\rm{]}}^{{\rm{3 - }}} }$ to [ Fe ( CN ) 6 ]​ 4 - ${{\rm{[Fe(CN)}}_{\rm{6}} {\rm{]}}^{{\rm{4 - }}} }$ being rapidly accelerated by sub-micomolar concentrations of TCNQF 4 1 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ . TCNQF 4 2 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{2 - }}} }$ generated in the catalytic cycle, reacts with [ Fe ( CN ) 6 ]​ 3 - ${{\rm{[Fe(CN)}}_{\rm{6}} {\rm{]}}^{{\rm{3 - }}} }$ to reform TCNQF 4 1 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ and produce [ Fe ( CN ) 6 ]​ 4 - ${{\rm{[Fe(CN)}}_{\rm{6}} {\rm{]}}^{{\rm{4 - }}} }$ . Along with the rapid catalytic reaction, the sluggish competing reaction between TCNQF 4 1 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ and S 2 O 3 2 - ${{\rm{S}}_{\rm{2}} {\rm{O}}_{\rm{3}}^{{\rm{2 - }}} }$ occurs to give TCNQF 4 2 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{2 - }}} }$ , which is protonated to HTCNQF 4 1 - ${{\rm{\;HTCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ , along with a trace amount of S 4 O 6 2 - ${{\rm{S}}_{\rm{4}} {\rm{O}}_{\rm{6}}^{{\rm{2 - }}} }$ . On addition of the precursor catalyst, TCNQF 4 0 ${{\rm{TCNQF}}_{\rm{4}}^{\rm{0}} }$ , rapid reduction with S 2 O 3 2 - ${{\rm{S}}_{\rm{2}} {\rm{O}}_{\rm{3}}^{{\rm{2 - }}} }$ occurs to form TCNQF 4 1 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ - the active catalyst. CuTCNQF 4 ${{\rm{CuTCNQF}}_{\rm{4}} }$ added to water is shown to be sufficiently soluble to provide adequate TCNQF 4 1 - ${{\rm{TCNQF}}_{\rm{4}}^{{\rm{1 - }}} }$ to act as the catalyst for the [ Fe ( CN ) 6 ]​ 3 - / 4 - ${{\rm{[Fe(CN)}}_{\rm{6}} {\rm{]}}^{{\rm{3 - /4 - }}} }$ - S 2 O 3 2 - ${{\rm{S}}_{\rm{2}} {\rm{O}}_{\rm{3}}^{{\rm{2 - }}} }$ / S 4 O 6 2 - ${{\rm{S}}_{\rm{4}} {\rm{O}}_{\rm{6}}^{{\rm{2 - }}} }$ reaction.

Development and Validation of Chromatographic and Spectrophotometric Methods for the Quantitation of Rufinamide in Pharmaceutical Preparations.

Objectives: Two optimized and validated high performance liquid chromatography (HPLC) and spectrophotometric methods are proposed. The developed methods were quantified with high sensitivity, accuracy, and precision at low concentrations to determine rufinamide (RUF) in active pharmaceutical ingredients (API) and pharmaceutical preparations. Materials and Methods: HPLC method was developed using a base deactivated silica Hypersil C18 column and a combination of methanol: acetonitrile: water (15: 10: 75, v/v/v) as the mobile phase and detected at 210 nm. A reaction of RUF with sodium nitrite and hydrochloric acid occurred, absorbed maximally at 385 nm was extended to develop a ultraviolet (UV)-visible spectrophotometric method to determine RUF in API and pharmaceutical preparations. Results: Different analytical validation parameters, including specificity, linearity, accuracy, precision, the limit of detection, quantification, ruggedness, and robustness, were determined as per International Conference on Harmonization guidelines. The linearity range of RUF was 0.15-3.5 and 10-100 µg/mL for HPLC and spectrophotometric methods, respectively. Conclusion: The proposed investigations were valuable for drug monitoring and regular analysis of RUF in quality control and research laboratories. Moreover, the accuracy and precision obtained with the UV-visible spectrophotometer implied that it could be a cheap, easy, and alternative method, while HPLC could be sensitive to determine RUF at low concentration levels.

Coupling of spectrometric, chromatographic, and chemometric analysis in the investigation of the photodegradation of sulfamethoxazole.

A workflow is proposed for the study of the photodegradation process of the sulfamethoxazole (SMX) based on the combination of different experimental techniques, including liquid chromatography, mass spectrometry, UV-Visible spectrophotometry, and the treatment of all the analytical data with advanced chemometric methods. SMX, which is one of the most widely used antibiotics worldwide and has been found at remarkable concentrations in various rivers and effluents over all Europe, was degraded in the laboratory under a controlled source of UV radiation, which simulates the environmental solar radiation (Suntest). Kinetic monitoring of the photodegradation process was performed using UV-Visible spectrophotometric measurements and by further Liquid Chromatography with Diode Array Detector and Mass Spectrometry analysis (LC-DAD-MS). Additionally, the acid-base properties were also investigated to see how the pH can affect the speciation of this substance during the photodegradation process. Based on the Multivariate Curve Resolution-Alternating Least Squares (MCR-ALS) application, the proposed chemometric method coped with the large amounts of data generated by the different analytical techniques used to monitor the evolution of the photodegradation process. Their simultaneous analysis involved applying a data fusion strategy and an advanced MCR-ALS constrained analysis, which allowed and improved the description of the complete degradation process, detecting the different species of the reaction, and identifying the possible transformation products formed. A total number of six species were resolved in the degradation process of SMX. In addition to the initial SMX, a second species corresponded to a conformational isomer, and the other four species represented different photoproducts, which have also been identified. Furthermore, three different acid-base species of SMX were obtained, and their pKa values were estimated.

Thermodynamic Study of Oxidovanadium(IV) with Kojic Acid Derivatives: A Multi-Technique Approach.

The good chelating properties of hydroxypyrone (HPO) derivatives towards oxidovanadium(IV) cation, VIVO2+, constitute the precondition for the development of new insulin-mimetic and anticancer compounds. In the present work, we examined the VIVO2+ complex formation equilibria of two kojic acid (KA) derivatives, L4 and L9, structurally constituted by two kojic acid units linked in position 6 through methylene diamine and diethyl-ethylenediamine, respectively. These chemical systems have been characterized in solution by the combined use of various complementary techniques, as UV-vis spectrophotometry, potentiometry, NMR and EPR spectroscopy, ESI-MS spectrometry, and DFT calculations. The thermodynamic approach allowed proposing a chemical coordination model and the calculation of the complex formation constants. Both ligands L4 and L9 form 1:1 binuclear complexes at acidic and physiological pHs, with various protonation degrees in which two KA units coordinate each VIVO2+ ion. The joined use of different techniques allowed reaching a coherent vision of the complexation models of the two ligands toward oxidovanadium(IV) ion in aqueous solution. The high stability of the formed species and the binuclear structure may favor their biological action, and represent a good starting point toward the design of new pharmacologically active vanadium species.

Diversity of Italian red wines: A study by enological parameters, color, and phenolic indices.

An extensive survey was conducted on 110 Italian monovarietal red wines from a single vintage to determine their standard compositional, color, and phenolic characteristics, analysing more than 35 parameters evaluated through methods commonly used in the wine industry. 'Primitivo' achieved the highest average alcohol strength (15.4% v/v) and dry extract values, while 'Cannonau' showed the lowest total acidity. 'Corvina' had the lowest phenolic content (1065 mg/L by Folin-Ciocalteu assay), remarkably different from the highest found in 'Sagrantino' (3578 mg/L), the latter being also the richest variety in both proanthocyanidins and vanillin-reactive flavanols. 'Teroldego' wines were the richest in both total and monomeric anthocyanins (702 and 315 mg/L, respectively), followed by 'Aglianico' and 'Raboso Piave', while 'Corvina', 'Nebbiolo', and 'Nerello Mascalese' were the poorest. 'Montepulciano' and 'Sangiovese' showed intermediate values for the majority of the parameters analyzed. A multivariate PCA-DA approach allowed achieving both a classification of the different wines as well as the discrimination of 'Sangiovese' wines produced in two regions (Emilia Romagna and Toscana) that returned a 42-66% success rate depending on the zone considered. Taking into account the number and diversity of the wines analyzed, a correlation study helped in better understanding the underlying relations between the most common and widespread analytical techniques for phenolic and color determinations.

Development of a paper-based method to detect Hg2+ in waste water using iturin from Bacillus subtilis.

Colorimetric, fluorescence, and paper-based method were developed to measure the Hg2+ level in water using iturin A, a lipopeptide produced by Bacillus subtilis. Firstly, iturin was used to synthesize highly stable and uniformly sized silver nanoparticles (AgNPs). Secondly, the iturin-AgNPs were found to be highly selective and sensitive to Hg2+. The absorbance of the reaction system showed a good linear correlation with the Hg2+ concentration from 0.5 to 5 mg/L at 450 nm in the UV-Vis spectroscopy detection with the limit of detection (LOD) of 0.5 mg/L. When the reaction system was detected by fluorescence measurement, a good linear relationship was found between the fluorescence intensity and Hg2+ concentration from 0.05 to 0.5 mg/ at 415 nm with the LOD of 0.05 mg/L. Lastly, a paper-based detection method was developed. The developed method was successfully used to detect Hg2+ in contaminated polluted waters and showed acceptable results in terms of sensitivity, selectivity and stability. The paper-based method could distinguish Hg2+ at levels higher than 0.05 mg/L, thereby meeting the guidelines of the effluent quality standard for industries (0.05 mg/L). In summary, this method can be used daily by various industries to monitor the Hg2+ level in effluent water.

Complex formation equilibria of polyamine ligands with copper(II) and zinc(II).

A comprehensive study of the protonation equilibria of a series of polyamine ligands along with their complex formation equilibria with Cu2+ and Zn2+ is reported in this work. The primary aim of this study has been the achievement of homogeneous thermodynamic data on these ligands, in order to evaluate their influence on the homeostatic equilibria of essential metal ions (Cu2+ and Zn2+) in biological fluids. These polyamines are largely used as linkers in the building of chelating agents for iron overload. Potentiometric and spectrophotometric techniques were used for the characterization of protonation and complex formation constants. In addition, the characterization of the formed complexes is discussed together with selected solid-state crystal structures, remarking the influence of the length of the chain and of the linear or tetradentate tripod nature of the polyamine ligands on the stability of the complexes.

Colorimetric and visual determination of ultratrace uranium concentrations based on the aggregation of amidoxime functionalized gold nanoparticles.

The authors describe the synthesis and characterization of 3-mercaptopropionylamidoxime functionalized gold nanoparticles (AuNPs) for visual detection of uranium (U) by cloud point extraction. The method is capable of quantifying U at the concentration limits set by the World Health Organization in drinking water i.e., 30.0 ng mL-1. The method is based on the gradual color change from red to blue that occurs as a result of the interaction between uranyl ion and the modified AuNPs leading to particle aggregation. Such analyte-triggered aggregation results in AuNP's peak absorbance quenching as well as red shift in the wavelength range of 520 to 543 nm. The colorimetric response at 520 nm is linear in the 2-100 ng mL-1 U concentration range, and the limit of detection is 0.3 ng mL-1. No interferences by other ions are found, and the relative standard deviation is ≤4% (for n = 5). The method is validated by analyzing a certified reference material (NIST SRM 1640a; natural water), and also applied to the quantification of U in four (spiked) water samples. Graphical abstract Schematic presentation of cloud point extraction (CPE) assisted coloirmetric and visual detection of uranium (U). In CPE of gold nanoparticles (AuNPs) the color of surfactant rich phase (SRP) turns red in absence of U(VI) and blue in presence of U(VI).

Investigating the scavenging of reactive oxygen species by antioxidants via theoretical and experimental methods.

Reactive oxygen (hydroxyl OH, hydroperoxyl OOH) species are highly unstable to be studied experimentally under normal conditions. The present study reports the antioxidant potential of the vitamins namely ascorbic acid, riboflavin and nicotinic acid against these reactive oxygen species (ROS) using the predictive power of Density Functional Theory (DFT) (B3LYP with 6311G basis set) calculations. The order of reactivity of aforementioned vitamins was assessed by determining the bond dissociation enthalpy (BDE) of the OH bond, which is the controlling factor, if hydrogen atom transfer (HAT) mechanism is considered. Transition state calculations were also carried out to determine the reaction barrier for the radical scavenging reaction of vitamins by calculating the forward and the backward activation energies using the same level of theory as mentioned above. The theoretical methodology was first validated by taking a model stable free radical, 2, 2-diphenyl-1, picrylhydrazyl radical (DPPH) and applying the proposed approach followed by the experimental studies using UV-visible spectroscopy and cyclic voltammetry. The close agreement between the theoretical prediction and experimental observations proved the authenticity of theoretical approach.

Citrate-capped silver nanoparticles as a probe for sensitive and selective colorimetric and spectrophotometric sensing of creatinine in human urine.

Urinary creatinine concentration is a critical physiological parameter that enables reliable assessment of patient renal function and diagnosis of a broad spectrum of diseases. In this study, a simple and inexpensive sensor comprising monodisperse, citrate-capped silver nanoparticles (cc-AgNPs) was developed, which enabled rapid, sensitive and selective quantitation of creatinine directly in unprocessed urine. The mechanism of this sensor entails the creatinine-mediated aggregation of the cc-AgNPs (within 1 min) under alkaline conditions (pH 12). This is attributed to the tautomerization of creatinine to its amino anionic species at alkaline pH, which cross-link the cc-AgNPs via hydrogen bond networks with the negatively charged citrate caps. Creatinine elicited visibly-discernable color changes of the cc-AgNPs colloids in a concentration-dependent manner up to 10 µM. UV-visible spectroscopic analyses of the cc-AgNPs revealed that creatinine elicited a concentration-dependent decrease in intensity of the localized surface plasmon resonance (LSPR) band centered around 403 nm, with a concomitant increase in intensity of the red-shifted LSPR band at 670 nm. This observation denotes a creatinine-mediated increase in cc-AgNP particle size via aggregation, as confirmed by transmission electron microscopy analysis. The cc-AgNP sensor exhibited a linear correlation between the A670/A403 extinction ratio and creatinine concentration range of 0-4.2 µM in aqueous solutions (R2 = 0.996), and a low detection limit of 53.4 nM. Hence, the simplicity, short assay time, and high sensitivity and selectivity of our cc-AgNP sensor affirms its utility as a creatinine monitoring assay for low-resource, point-of-care settings.

Phenytoin-Bovine Serum Albumin interactions - modeling plasma protein - drug binding: A multi-spectroscopy and in silico-based correlation.

The study focused on the analysis of the nature and site of binding of Phenytoin (PHT) -(a model hydrophobic drug) with Bovine Serum Albumin (BSA) (a model protein used as a surrogate for HSA). Interactions with defined amounts of Phenytoin and BSA demonstrated a blue shift (hypsochromic -change in the microenvironment of the tryptophan residue with decrease in the polar environment and more of hydrophobicity) with respect to the albumin protein and a red shift (bathochromic -hydrophobicity and polarity related changes) in the case of the model hydrophobic drug. This shift, albeit lower in magnitude, has been substantiated by a fairly convincing, Phenytoin-mediated quenching of the endogenous fluorophore in BSA. Spectral shifts studied at varying pH, temperatures and incubation periods (at varying concentrations of PHT with a defined/constant BSA concentration) showed no significant differences (data not shown). FTIR analysis provided evidence of the interaction of PHT with BSA with a stretching vibration of 1737.86cm-1, apart from the vibrations characteristically associated with the amine and carboxyl groups respectively. Our in vitro findings were extended to molecular docking of BSA with PHT (with the different ionized forms of the drug) and the subsequent LIGPLOT-based analysis. In general, a preponderance of hydrophobic interactions was observed. These hydrophobic interactions corroborate the tryptophan-based spectral shifts and the fluorescence quenching data. These results substantiates our hitherto unreported in vitro/in silico experimental flow and provides a basis for screening other hydrophobic drugs in its class.

DFT and TD-DFT insights, photolysis and photocatalysis investigation of three dyes with similar structure under UV irradiation with and without TiO2 as a catalyst: Effect of adsorption, pH and light intensity.

TiO2-mediated photocatalytic degradation of three triphenylmethane dyes (basic fuchsin, acid fuchsin and Gentian violet), was investigated in aqueous suspensions in the presence and the absence of titanium dioxide P25 Degussa as photocatalyst. The photodegradation process was investigated using UV-A (365nm) and UV-C (254nm) light alone and UV-A in the presence of TiO2·The effects of various operational parameters were investigated such as: the effect of adsorption in the dark, the influence of pH, the influence of irradiation wavelength and the effect of light intensity. The study of the effect of various parameters reveals that the photolysis of dyes increases with the increase of light intensity, the degradation rate under UV-C (254nm) was found better than under UV-A 365nm. The photocatalytic degradation was found to follow the same order of adsorption. The decolorization and the degradation kinetics were found to follow the pseudo-first-order kinetics. The mineralization of dye was found to follow the same order of disappearance as the photocatalytic degradation and depended directly to its functional groups and its number of carbons. Additionally, density functional theory (DFT) was applied for calculations of both electronic structure and spectroscopic properties of the studied compounds, where the obtained results of the three dyes show that the theoretical electronic spectra and the experimental UV-visible ones are similar in shapes, positions and intensities.

Study on Quality Standard of Chailing Hugan Granules / 中国药房

OBJECTIVE:To establish the quality standard of Chailing hugan granules. METHODS:TLC was used for qualitative identification of Radix bupleuri,Atractylodes macrocephala and Glycyrrhiza uralensis. The content of total flavonoids (by rutin) in preparation was determined by UV-visible spectrophotometry. The moisture, dissolubility and granularity of preparation were determined. RESULTS:TLC spots of R. bupleuri ,A. macrocephala and G. uralensis were clear and well-separated without interference from negative control. The linear range of rutin was 0.050-0.300 mg/mL(r＝0.999 8). RSDs of precision, stability and reproducibility tests were all lower than 2%. The recoveries were 97.89%-100.01%(RSD＝0.68%,n＝9). The content of samples were 1.920-2.018 mg/g. The contents of moisture in 3 batches of samples were 1.54%,1.62% and 1.57%;all samples dissolved within 5 min. The sum of granules not passing through No.1 sieve and passing through No.5 sieve were 2.13%, 2.51%,2.38%,which were all in line with the requirements of Chinese Pharmacopeia (2015 edition,Vol Ⅳ). CONCLUSIONS:The content of total flavonoicle in Chailing hugan granules should be no less than 1.57 mg/g (by rutin). Established quality standard is simple,rapid,accurate and reproducible,and can be used for quality control of Chailing hugan granules.

Measuring Enzyme Kinetics of Glycoside Hydrolases Using the 3,5-Dinitrosalicylic Acid Assay.

Use of the 3,5-dinitrosalicylic acid reagent allows the simple and rapid quantification of reducing sugars. The method can be used for analysis of biological samples or in the characterization of enzyme reactions. Presented here is an application of the method in measuring the kinetics of a glycoside hydrolase reaction, including the optimization of the DNSA reagent, and the production of a standard curve of absorbance and sugar concentration.

Detection of silver nanoparticles in seawater at ppb levels using UV-visible spectrophotometry with long path cells.

Silver nanoparticles (AgNPs) are emerging contaminants that are difficult to detect in natural waters. UV-visible spectrophotometry is a simple technique that allows detection of AgNPs through analysis of their characteristic surface plasmon resonance band. The detection limit for nanoparticles using up to 10cm path length cuvettes with UV-visible spectrophotometry is in the 0.1-10ppm range. This detection limit is insufficiently low to observe AgNPs in natural environments. Here we show how the use of capillary cells with an optical path length up to 200cm, forms an excellent technique for rapid detection and quantification of non-aggregated AgNPs at ppb concentrations in complex natural matrices such as seawater.

Similarity Evaluation of the Dissolution Curves of Generic and Original Preparation of Losartan Potassium Tablets / 中国药房

OBJECTIVE:To evaluate the dissolution curves similarity of generic and original preparation of Losartan potassium tablets,and to provide reference for improving quality evaluation of the preparation.METHODS:Using hydrochloric acid solution (pH 3.0),phosphate buffer solution(pH 4.5),phosphate buffer solution (pH 6.8) and water as medium,paddle method was adopted for dissolution test with dissolution medium volume of 900 mL and rotation speed of 50 r/min.UV-visible spectrophotometry was adopted to determine accumulative dissolution of generic and original preparation of Losartan potassium tablets with the detection wavelength of 256 um.The similarity of dissolution curves were evaluated by calculating similarity factor(f2).RESULTS:The linear range of losartan potassium was 12.11-35.96 μg/mL (r≥0.999 7).RSDs of precision,stability and reproducibility tests were all lower than 5.0％.The recoveries of 4 dissolution media were 98.66％-100.84％ (RSD=0.77％,n=9),98.91％-100.59％ (RSD=0.49％,n=9),98.33％-101.39％ (RSD=0.85％,n=9),99.46％-101.32％ (RSD=0.55％,n=9).In 4 dissolution media,f2 of the dissolution curves of 3 batches of generic and original preparation of Losartan potassium tablets were all higher than 70.CONCLUSIONS:The dissolution curves of self-made and original preparation of Losartan potassium tablets show good similarity.

A combined TD-DFT and spectroscopic investigation of the solute-solvent interactions of efavirenz.

Efavirenz, commercially known as Sustiva® or Stocrin®, is a first-line antiretroviral treatment for HIV/AIDS. The clinical efficacy of efavirenz is, however, hindered by its solubility. We sought to investigate the solute-solvent effects of efavirenz by means of a combined qualitative study implementing UV-visible spectrophotometry, (1)H NMR spectroscopy and time-dependent density functional theory (TD-DFT) calculations. The UV spectrum displayed two main absorbance maxima, band I and band II at 246-260 and 291-295 nm, respectively. A general bathochromic shift was noticed from the non-polar solvent cyclohexane to the most polar solvent DMSO (≈13.69 nm) in band I and a smaller bathochromic (≈2.17 nm) and hyperchromic shift was observed in band II. We propose that these observations are due to the role of the amino (NH) and carbonyl (CO) functionalities which induce charge-transfer and intra- and inter-molecular hydrogen bonding. The aromatic and amine protons showed the most deshielded effects in the observed chemical shifts (δ) in the more polar DMSO-d6 solvent relative to CDCl3. The (1)H NMR chemical shifts observed are due to the increased delocalization of the lone pair electrons of the amino nitrogen with increased polarity of the more polar DMSO solvent. The theoretical reproduction of the UV and (1)H NMR spectra by means of TD-DFT is in good agreement with the experimental results.