Incidence of cardiovascular disease in a cohort of mine workers exposed to ultrafine aluminum powder in Ontario, Canada.

BACKGROUND: A retrospective cohort study was conducted to estimate associations between an ultrafine aluminum powder, McIntyre Powder (MP), and cardiovascular disease incidence in a cohort of mine workers from Ontario, Canada. Disease outcomes included ischemic heart disease (IHD), acute myocardial infarction (AMI), congestive heart failure (CHF), and strokes and transient ischemic attacks (STIA). METHODS: Using work history records from the Ontario Mining Master File (MMF) mine workers were followed for disease incidence in administrative health records. The analysis included 25,813 mine workers who were exposed to MP between 1943 and 1979 and followed for cardiovascular disease (CVD) diagnoses between 2006 and 2018. Cardiovascular disease cases were ascertained using physician, hospital, and ambulatory care records. Poisson regression models were used to estimate age and birth-year adjusted incidence rate ratios (RR) and 95% confidence intervals (CI) for associations between MP exposure and CVD outcomes. RESULTS: Ever-exposure to MP was positively associated with modest increases in the incidence rate of IHD, AMI, and CHF, but not STIA, using both assessment approaches. Duration of self-reported MP exposure was positively associated with monotonically increasing rates of IHD and AMI compared to never-exposed miners, with the greatest association observed among miners with >20 years of exposure (for IHD: RR 1.24, 95% CI: 0.91-1.68; and for AMI: RR 1.52, 95% CI 1.01-2.28). CONCLUSION: Mine workers ever-exposed to MP had modestly elevated rates of CVD. The rate of CVD diagnoses appeared to increase with longer duration of exposure when assessed by both self-reported exposure and through historical records.

Mechanistic insights into cardiovascular effects of ultrafine particle exposure: A longitudinal panel study.

BACKGROUND: Ultrafine particle (UFP) has been linked with higher risks of cardiovascular diseases; however, the biological mechanisms remain to be fully elucidated. OBJECTIVES: This study aims to investigate the cardiovascular responses to short-term UFP exposure and the biological pathways involved. METHODS: A longitudinal panel study was conducted among 32 healthy, non-smoking young adults in Shanghai, China, who were engaged in five rounds of follow-ups between December 2020 and November 2021. Individual exposures were calculated based on the indoor and outdoor real-time measurements. Blood pressure, arterial stiffness, targeted biomarkers, and untargeted proteomics and metabolomics were examined during each follow-up. Linear mixed-effect models were applied to analyze the exposure and health data. The differential proteins and metabolites were used for pathway enrichment analyses. RESULTS: Short-term UFP exposure was associated with significant increases in blood pressure and arterial stiffness. For example, systolic blood pressure increased by 2.10 % (95 % confidence interval: 0.63 %, 3.59 %) corresponding to each interquartile increase in UFP concentrations at lag 0-3 h, while pulse wave velocity increased by 2.26 % (95 % confidence interval: 0.52 %, 4.04 %) at lag 7-12 h. In addition, dozens of molecular biomarkers altered significantly. These effects were generally present within 24 h after UFP exposure, and were robust to the adjustment of co-pollutants. Molecular changes detected in proteomics and metabolomics analyses were mainly involved in systemic inflammation, oxidative stress, endothelial dysfunction, coagulation, and disturbance in lipid transport and metabolism. DISCUSSION: This study provides novel and compelling evidence on the detrimental subclinical cardiovascular effects in response to short-term UFP exposure. The multi-omics profiling further offers holistic insights into the underlying biological pathways.

Exploring the triple burden of social disadvantage, mobility poverty, and exposure to traffic-related air pollution.

Understanding the relationships between ultrafine particle (UFP) exposure, socioeconomic status (SES), and sustainable transportation accessibility in Toronto, Canada is crucial for promoting public health, addressing environmental justice, and ensuring transportation equity. We conducted a large-scale mobile measurement campaign and employed a gradient boost model to generate exposure surfaces using land use, built environment, and meteorological conditions. The Ontario Marginalization Index was used to quantify various indicators of social disadvantage for Toronto's neighborhoods. Our findings reveal that people in socioeconomically disadvantaged areas experience elevated UFP exposures. We highlight significant disparities in accessing sustainable transportation, particularly in areas with higher ethnic concentrations. When factoring in daily mobility, UFP exposure disparities in disadvantaged populations are further exacerbated. Furthermore, individuals who do not generate emissions themselves are consistently exposed to higher UFPs, with active transportation users experiencing the highest UFP exposures both at home and at activity locations. Finally, we proposed a novel index, the Community Prioritization Index (CPI), incorporating three indicators, including air quality, social disadvantage, and sustainable transportation. This index identifies neighborhoods experiencing a triple burden, often situated near major infrastructure hubs with high diesel truck activity and lacking greenspace, marking them as high-priority areas for policy action and targeted interventions.

Characterization of PAHs bound to ambient ultrafine particles around runways at an international airport.

The impact of airport activities on air quality, is not sufficiently documented. In order to better understand the magnitude and properly assess the sources of emissions in the sector, it is necessary to establish databases with real data on those pollutants that could have the greatest impact on both health and the environment. Particulate matter (PM), especially ultrafine particles, are a research priority, not only because of its physical properties, but also because of its ability to bind highly toxic compounds such as polycyclic aromatic hydrocarbons (PAHs). Samples of PM were collected in the ambient air around the runways at Barajas International Airport (Madrid, Spain) during October, November and December 2021. Samples were gathered using three different sampling systems and analysed to determine the concentration of PAHs bound to PM. A high-volume air sampler, a Berner low-pressure impactor, and an automated off-line sampler developed in-house were used. The agreement between the samplers was statistically verified from the PM and PAH results. The highest concentration of PM measured was 31 µg m-3, while the concentration of total PAH was 3 ng m-3, both comparable to those recorded in a semi-urban area of Madrid. The PAHs showed a similar profile to the particle size distribution, with a maximum in the 0.27-0.54 µm size range, being preferentially found in the submicron size fractions, with more than 84% and around 15-20% associated to UFPs. It was found that the ratio [PAHs(m)/PM(m)] was around 10-4 in the warmer period (October), whereas it more than doubled in the colder months (November-December). It is significant the shift in the relative distribution of compounds within these two periods, with a notable increase in the 5 and 6 ring proportions in the colder period. This increase was probably due to the additional contribution of other external sources, possibly thermal and related to combustion processes, as supported by the PAH diagnostic ratios.

The Exposure Peaks of Traffic-Related Ultrafine Particles Associated with Inflammatory Biomarkers and Blood Lipid Profiles.

In this article, we explored the effects of ultrafine particle (UFP) peak exposure on inflammatory biomarkers and blood lipids using two novel metrics-the intensity of peaks and the frequency of peaks. We used data previously collected by the Community Assessment of Freeway Exposure and Health project from participants in the Greater Boston Area. The UFP exposure data were time-activity-adjusted hourly average concentration, estimated using land use regression models based on mobile-monitored ambient concentrations. The outcome data included C-reactive protein, interleukin-6 (IL-6), tumor necrosis factor-alpha receptor 2 (TNF-RII), low-density lipoprotein (LDL), high-density lipoprotein (HDL), triglycerides and total cholesterol. For each health indicator, multivariate regression models were used to assess their associations with UFP peaks (N = 364-411). After adjusting for age, sex, body mass index, smoking status and education level, an increase in UFP peak exposure was significantly (p < 0.05) associated with an increase in TNF-RII and a decrease in HDL and triglycerides. Increases in UFP peaks were also significantly associated with increased IL-6 and decreased total cholesterol, while the same associations were not significant when annual average exposure was used. Our work suggests that analysis using peak exposure metrics could reveal more details about the effect of environmental exposures than the annual average metric.

Associations between ultrafine particle pollution and daily outpatient visits for respiratory diseases in Shanghai, China: a time-series analysis.

Previous epidemiological studies have linked short-term exposure to particulate matter with outpatient visits for respiratory diseases. However, evidence on ultrafine particle (UFP) is still scarce in China. To investigate the association between short-term UFP exposure and outpatient visits for respiratory diseases as well as the corresponding lag patterns, information on outpatient visits for main respiratory diseases during January 1, 2017, to December 31, 2019 was collected from electronic medical records of two large tertiary hospitals in Shanghai, China. Generalized additive models employing a Quasi-Poisson distribution were employed to investigate the relationships between UFP and respiratory diseases. We computed the percentage change and its corresponding 95% confidence interval (CI) for outpatient visits related to respiratory diseases per interquartile range (IQR) increase in UFP concentrations. Based on a total of 1,034,394 hospital visits for respiratory diseases in Shanghai, China, we found that the strongest associations of total UFP with acute upper respiratory tract infection (AURTI), bronchitis, chronic obstructive pulmonary disease (COPD), and pneumonia occurred at lag 03, 03, 0, and 03 days, respectively. Each IQR increase in the total UFP concentrations was associated with increments of 9.02% (95% CI: 8.64-9.40%), 3.94% (95% CI: 2.84-5.06%), 4.10% (95% CI: 3.01-5.20%), and 10.15% (95% CI: 9.32-10.99%) for AURTI, bronchitis, COPD, and pneumonia, respectively. Almost linear concentration-response relationship curves without apparent thresholds were observed between total UFP and outpatient-department visits for four respiratory diseases. Stratified analyses illustrated significantly stronger associations of total UFP with AURTI, bronchitis, and pneumonia among female patients, while that with COPD was stronger among male patients. After adjustment of criteria air pollutants, these associations all remained robust. This time-series study indicates that short-term exposure to UFP was associated with increased risk of hospital visits for respiratory diseases, underscoring the importance of reducing ambient UFP concentrations for respiratory diseases control and prevention.

Assessing community health risks from exposure to ultrafine particles containing transition metals in the Greater Houston Area.

Ultrafine particles (UFPs) in urban air environments have been an essential public health concern. The inhalation of UFPs can introduce transition metals contained in the UFP into the human airways, leading to adverse health effects. Therefore, it is crucial to investigate urban air UFP exposure and health risks induced by transition metals. This research carried out a series of field measurements to study urban air UFP exposure in the Greater Houston Area. Three sampling sites in the Greater Houston Area representing varying levels of UFP exposures were selected. The newly developed Mobile Aerosol Lung Deposition Apparatus (MALDA) which consists of a complete set of human airway replicas and a pair of UFP particle sizers was deployed in the sampling sites during three sampling timeframes (morning rush hours, noon, and afternoon rush hours) to obtain on-site UFP respiratory deposition data. UFP samples were collected at the sampling sites for metal composition analysis. The acquired UFP respiratory deposition data and UFP composition data were then used to calculate the respiratory deposited mass of transition metals and estimate the associated health risks for individuals living near sampling sites. Our results showed that transition metal-induced non-cancer risks caused by exposure to urban UFPs were within acceptable limits. The estimated lifetime excess cancer risks were generally <10-6, indicating an overall acceptable level of transition metal-induced cancer risk.

Exposure hazards of particles and volatile organic compounds emitted from material extrusion 3D printing: Consolidation of chamber study data.

Ultrafine particles and volatile organic compounds (VOCs) have been detected from material extrusion 3D printing, which is widely used in non-industrial environments. This study consolidates data of 447 particle emission and 58 VOC emission evaluations from a chamber study using a standardized testing method with various 3D printing scenarios. The interquartile ranges of the observed emission rates were 109-1011 #/h for particles and 0.2-1.0 mg/h for total VOC. Print material contributed largely to the variations of particle and total VOC emissions and determined the most abundantly emitted VOCs. Printing conditions and filament specifications, included printer brand, print temperature and speed, build plate heating setup, filament brand, color and composite, also affected emissions and resulted in large variations observed in emission profiles. Multiple regression showed that particle emissions were more impacted by various print conditions than VOC emissions. According to indoor exposure modeling, personal and residential exposure scenarios were more likely to result in high exposure levels, often exceeding recommended exposure limits. Hazardous VOCs commonly emitted from 3D printing included aromatics, aldehydes, alcohols, ketones, esters and siloxanes, among which were various carcinogens, irritants and developmental and reproductive toxins. Therefore, 3D printing emits a complex mixture of ultrafine particles and various hazardous chemicals, exposure to which may exceed recommended exposure limits and potentially induce acute, chronic, or developmental health effects for users depending on exposure scenarios.

Indoor exposure to ultrafine particles related to domestic activities: A systematic review and meta-analysis.

Ultrafine particles (< 100 nm) are of increasing concern because of their toxicological potential. Emission processes suggest their presence in all environments, including at home, where particularly at-risk populations may be exposed. However, knowledge of their impact on health is still limited, due to difficulties in properly assessing exposure in epidemiological studies. In this context, the objective of this study was to provide a complete summary of indoor exposure to ultrafine particles in highly industrialised countries by examining the domestic activities that influence such exposure. We conducted a systematic review, according to PRISMA guidelines using PubMed, Web of Science and Scopus up to and including 2021. We carried out a qualitative and quantitative analysis of the selected studies with a standardised template. Exposure circumstances, measurement methods, and results were analysed. Finally, a meta-analysis of the measured concentrations was performed to study exposure levels during domestic activities. The review included 69 studies resulting in the analysis of 346 exposure situations. Nine main groups of activities were identified: cooking, which was the most studied, smoking, the use of air-fresheners, cleaning, heating, personal care, printing, do-it-yourself activities, and others. Over 50 different processes were involved in these activities. Based on available particle number concentrations, the highest average of mean concentrations was associated with grilling (14,400 × 103 cm-3), and the lowest with wood stove (18 × 103 cm-3). The highest average of peak concentrations was that for the use of hair dryers (695 × 103 cm-3), and the lowest for the use of air cleaners (11 × 103 cm-3). A hierarchy of domestic activities and related processes leading to ultrafine particle exposure is provided, along with average exposure concentrations at home. However, more extensive measurement campaigns are needed under real-life conditions to improve assessments of indoor exposure to ultrafine particles.

Sub-23 nm Particles Dominate Non-Volatile Particle Number Emissions of Road Traffic.

Ultrafine particles (<100 nm) in urban air are a serious health hazard not yet fully understood. Therefore, particle number concentration monitoring was recently included in the WHO air quality guidelines. At present, e.g., the EU regulates particle number only regarding the emissions of solid particles larger than 23 nm emitted by vehicles. The aim of this study was to examine the non-volatile fraction of sub-23 nm particles in a traffic-influenced urban environment. We measured the number concentration of particles larger than 1.4, 3, 10, and 23 nm in May 2018. Volatile compounds were thermally removed in the sampling line and the line losses were carefully determined. According to our results, the sub-23 nm particles dominated the non-volatile number concentrations. Additionally, based on the determined particle number emission factors, the traffic emissions of non-volatile sub-10 nm particles can be even 3 times higher than those of particles larger than 10 nm. Yet, only a fraction of urban sub-10 nm particles consisted of non-volatiles. Thus, while the results highlight the role of ultrafine particles in the traffic-influenced urban air, a careful consideration is needed in terms of future particle number standards to cover the varying factors affecting measured concentrations.

Temperature-dependent particle number emission rates and emission characteristics during heating processes of edible oils.

The goal of this research is to investigate the temperature-dependent emission rates of particle numbers and emission characteristics during oil heating. Seven regularly used edible oils were studied in a variety of tests to attain this objective. First, total particle number emission rates ranging from 10 nm to 1 µm were measured, followed by an examination within six size intervals from 0.3 µm to 10 µm. Following that, the impacts of oil volume and oil surface area on the emission rate were investigated, and multiple regression models were developed based on the results. The results showed that corn, sunflower and soybean oils had higher emission rates than other oils above 200 °C, with peak values of 8.22 × 109#/s, 8.19 × 109#/s and 8.17 × 109#/s, respectively. Additionally, peanut and rice oils were observed to emit the most particles larger than 0.3 µm, followed by medium-emission (rapeseed and olive oils) and low-emission oils (corn, sunflower and soybean oils). In most cases, oil temperature (T) has the most significant influence on the emission rate during the smoking stage, but its influence was not as pronounced in the moderate smoking stage. The models obtained are all statistically significant (P < 0.001), with R2 values greater than 0.9, and the classical assumption test concluded that regressions were in accordance with the classical assumptions regarding normality, multicollinearity, and heteroscedasticity. In general, low oil volume and large oil surface area were more recommended for cooking to mitigate UFPs emission.

Association of long-term air pollution and ambient noise with cognitive decline in the Heinz Nixdorf Recall study.

Little is known about the impact of long-term ambient air pollution (AP) and noise exposure on change in cognitive function over years in the elderly. In this study, we wanted to examine the association between long-term exposure to AP and noise with the rate of cognitive decline in a population aged 50 and older and susceptible groups with mild cognitive impairment or at a genetically higher risk of Alzheimer's disease (Apolipoprotein E ε4 positive). Participants in the German population-based Heinz Nixdorf Recall study carried out five neuropsychological tests. Individual tests scores at the first (T1 = 2006-2008) and second (T2 = 2011-2015) follow-up for each test were used as outcomes after standardization using predicted means adjusted for age and education. Global cognitive score (GCS) was defined as sum of five standardized scores of individual tests. Long-term exposures to particulate matter (PM2.5, PM10, PM2.5 absorbance), accumulation mode particle number (PNacc), a proxy of ultrafine particles, and nitrogen dioxide were estimated by the land-use regression and chemistry transport models. Noise exposures were assessed as outdoor weighted nighttime road traffic noise (Lnight) means. We performed linear regression analyses adjusted for sex, age, individual and neighborhood socio-economic status, and lifestyle variables. Effect modification in vulnerable groups was estimated using multiplicative interaction terms between exposure and a modifier. Overall, 2554 participants (49.5% men, median age is 63 (IQR = 12)) were included. We found weak associations between higher exposure to PM10 and PM2.5 with faster decline in the immediate verbal memory test. Adjustment for potential confounders and for co-exposures did not change the results. We saw no effects on GCS, and no effect of noise exposure. In susceptible groups, higher AP and noise exposure were tended to be associated with faster decline in GCS. Our results suggest that AP exposure may accelerate cognitive decline in older ages, particularly in susceptible groups.

Effects of endogenous and exogenous reductants in lung fluid on the bioaccessible metal concentration and oxidative potential of ultrafine particles.

Health risk posed by ultrafine particles (UFPs) is potentially increased by reducing substances present in lung fluid, although knowledge of the underlying mechanisms is insufficient. Here, UFPs mainly consisting of metals and quinones were prepared. The reducing substances examined included lung endogenous and exogenous reductants. UFPs were extracted in simulated lung fluid containing reductants. Extracts were used to analyze metrics relevant to health effects, including the bioaccessible metal concentration (MeBA) and oxidative potential (OPDTT). The MeBA of Mn (974.5-9896.9 µg L-1) was higher than those of Cu (155.0-599.6 µg L-1) and Fe (79.9-500.9 µg L-1). Correspondingly, UFPs containing Mn had higher OPDTT (2.07-12.0 pmol min-1 µg-1) than those containing Cu (2.03-7.11 pmol min-1 µg-1) and Fe (1.63-5.34 pmol min-1 µg-1). Endogenous and exogenous reductants can increase MeBA and OPDTT, and the increments were generally higher for composite than pure UFPs. Positive correlations between OPDTT and MeBA of UFPs in the presence of most reductants emphasized the importance of the bioaccessible metal fraction in UFPs for inducing oxidative stress by reactive oxygen species (ROS)-generating reactions between quinones, metals, and lung reductants. Present findings provide novel insight into the toxicity and health risks of UFPs.

Biological impact of sequential exposures to allergens and ultrafine particle-rich combustion aerosol on human bronchial epithelial BEAS-2B cells at the air liquid interface.

The prevalence of allergic diseases is constantly increasing since few decades. Anthropogenic ultrafine particles (UFPs) and allergenic aerosols is highly involved in this increase; however, the underlying cellular mechanisms are not yet understood. Studies observing these effects focused mainly on singular in vivo or in vitro exposures of single particle sources, while there is only limited evidence on their subsequent or combined effects. Our study aimed at evaluating the effect of subsequent exposures to allergy-related anthropogenic and biogenic aerosols on cellular mechanism exposed at air-liquid interface (ALI) conditions. Bronchial epithelial BEAS-2B cells were exposed to UFP-rich combustion aerosols for 2 h with or without allergen pre-exposure to birch pollen extract (BPE) or house dust mite extract (HDME). The physicochemical properties of the generated particles were characterized by state-of-the-art analytical instrumentation. We evaluated the cellular response in terms of cytotoxicity, oxidative stress, genotoxicity, and in-depth gene expression profiling. We observed that single exposures with UFP, BPE, and HDME cause genotoxicity. Exposure to UFP induced pro-inflammatory canonical pathways, shifting to a more xenobiotic-related response with longer preincubation time. With additional allergen exposure, the modulation of pro-inflammatory and xenobiotic signaling was more pronounced and appeared faster. Moreover, aryl hydrocarbon receptor (AhR) signaling activation showed to be an important feature of UFP toxicity, which was especially pronounced upon pre-exposure. In summary, we were able to demonstrate the importance of subsequent exposure studies to understand realistic exposure situations and to identify possible adjuvant allergic effects and the underlying molecular mechanisms.

Investigating the hygroscopicities of calcium and magnesium salt particles aged with SO2 using surface plasmon resonance microscopy.

The hygroscopicities of calcium and magnesium salts strongly affect the environment and climate, but the aging products of these salts at high relative humidities (RHs) are still poorly understood. In this study, surface plasmon resonance microscopy (SPRM) was used to determine the hygroscopic growth factors (GFs) of Ca(NO3)2 and Mg(NO3)2 separately or mixed with galactose at different mass ratios at different RHs before and after aging. For all particles, the measured GFs showed no indication of deliquescence across the range of RHs tested, and overall hygroscopicity was clearly lower after than before aging. The Ca(NO3)2 and Mg(NO3)2 GFs at 90 % RH were 1.80 and 1.66, respectively, before aging and 1.33 and 1.42, respectively, after 4 h aging, meaning aging decreased the GFs by 26.11 % and 14.46 %, respectively. Aging decreased the hygroscopicity because insoluble or sparingly soluble substances (CaSO3, CaSO4, MgSO3) formed and strongly changed the overall hygroscopicity. For bicomponent aerosols with different mass ratios, the GFs (calculated using the Zdanovskii-Stokes-Robinson method) of the other components except galactose at 90 % RH after 1 h aging were all lower, respectively, than the measured GFs of pure Ca(NO3)2 and Mg(NO3)2 after aging for 1 h, especially with the mass ratio of 1:2, their GFs have decreased by 14.63 % and 7.50 %, respectively. Subsequently, Ion chromatograms indicated that the peak area ratio of SO42- to NO3- ratios were higher for the aged bicomponent particles than aged single-component particles, possibly because adding galactose improved the gas-liquid state stability during drying after the aging process and therefore promoted nitrate consumption and sulfate formation. The results indicated that organic components may play important roles in heterogeneous reactions between trace gases and multicomponent aerosols and should be considered in evaluating the impacts on submicron aerosol composition of high atmospheric SO2 concentrations at high humidities.

Fine and ultrafine particle- and gas-polycyclic aromatic hydrocarbons affecting southern Thailand air quality during transboundary haze and potential health effects.

Distribution of PM0.1, PM1 and PM2.5 particle- and gas-polycyclic aromatic hydrocarbons (PAHs) during the 2019 normal, partial and strong haze periods at a background location in southern Thailand were investigated to understand the behaviors and carcinogenic risks. PM1 was the predominant component, during partial and strong haze periods, accounting for 45.1% and 52.9% of total suspended particulate matter, respectively, while during normal period the contribution was only 34.0%. PM0.1 concentrations, during the strong haze period, were approximately 2 times higher than those during the normal period. Substantially increased levels of particle-PAHs for PM0.1, PM1 and PM2.5 were observed during strong haze period, about 3, 5 and 6 times higher than those during normal period. Gas-PAH concentrations were 10 to 36 times higher than those of particle-PAHs for PM2.5. Average total Benzo[a]Pyrene Toxic Equivalency Quotients (BaP-TEQ) in PM0.1, PM1 and PM2.5 during haze periods were about 2-6 times higher than in the normal period. The total accumulated Incremental Lifetime Cancer Risks (ILCRs) in PM0.1, PM1 and PM2.5 for all the age-specific groups during the haze effected scenario were approximately 1.5 times higher than those in non-haze scenario, indicating a higher potential carcinogenic risk. These observations suggest PM0.1, PM1 and PM2.5 were the significant sources of carcinogenic aerosols and were significantly affected by transboundary haze from peatland fires. This leads to an increase in the volume of smoke aerosol, exerting a significant impact on air quality in southern Thailand, as well as many other countries in lower southeast Asia.

Ultrafine particles exposure is associated with specific operative procedures in a multi-chair dental clinic.

Air quality in dental clinics is critical, especially in light of the severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) pandemic, given that dental professionals and patients are at risk of regular exposure to aerosols and bioaerosols in dental clinics. High levels of ultrafine particles (UFP) may be produced by dental procedures. This study aimed to quantify ultrafine particles (UFP) concentrations in a real multi-chair dental clinic and compare the levels of UFP produced by different dental procedures. The efficiency of a high-volume evacuator (HVE) in reducing the UFP concentrations during dental procedures was also assessed. UFP concentrations were measured both inside and outside of a dental clinic in Shanghai, China during a 12-day period from July to September 2020. Dental activities were recorded during working hours. The mean (±standard deviation) concentrations of indoor and outdoor UFP during the sampling period were 8,209 (±4,407) counts/cm3 and 15,984 (±7,977) counts/cm3, respectively. The indoor UFP concentration was much higher during working hours (10,057 ± 5,725 counts/cm3) than during non-working hours (7,163 ± 2,972 counts/cm3). The UFP concentrations increased significantly during laser periodontal treatment, root canal filling, tooth drilling, and grinding, and were slightly elevated during ultrasonic scaling or tooth extraction by piezo-surgery. The highest UFP concentration (241,136 counts/cm3) was observed during laser periodontal treatment, followed by root canal filling (75,034 counts/cm3), which showed the second highest level. The use of an HVE resulted in lower number concentration of UFP when drilling and grinding teeth with high-speed handpieces, but did not significantly reduce UFP measured during laser periodontal therapy. we found that many dental procedures can generate high concentration of UFP in dental clinics, which may have a great health impact on the dental workers. The use of an HVE may help reduce the exposure to UFP during the use of high-speed handpieces.

Size-segregated particle number concentrations and outpatient-department visits for pediatric respiratory diseases in Shanghai, China.

BACKGROUND: Few studies have simultaneously explored which size of particles has the greatest impact on the risk for pediatric asthma, bronchitis and upper respiratory tract infections (URTIs). OBJECTIVES: To investigate the short-term association between size-segregated particle number concentrations (PNCs) and outpatient-department visits (ODVs) for major pediatric respiratory diseases. METHODS: Daily counts of pediatric ODVs for asthma, bronchitis and URTIs were obtained from 66 hospitals in Shanghai, China, from 2016 to 2018. Pollutant effects were estimated using Poisson generalized additive models combined with polynomial distributed lag models. We also fitted co-pollutant cumulative effects models included six criteria air pollutants and conducted stratifying analyses by gender, age, season and geographic distances. RESULTS: We identified a total of 430,103 patients with asthma, 1,547,013 patients with bronchitis, and 2,155,738 patients with URTIs from the hospitals. Effect estimates increased with decreasing particle size. Ultrafine particle (UFP) and PNCs of 0.10-0.40 µm particles (PNC0.10-0.40) were associated with increased ODVs for asthma, bronchitis and URTIs at cumulative lags up to 3d. Associations tended to appear stable after adjusting for criteria air pollutants. At the cumulative lag 0-2d, each interquartile range increase in UFP was associated with increased ODVs due to asthma (relative risk 1.21, 95% CI: 1.07, 1.38), bronchitis (1.20, 95% CI: 1.07, 1.34) and URTI (1.17, 95% CI: 1.06, 1.30), whereas the associations for PNC0.10-0.40 remained significant but attenuated in magnitude. CONCLUSIONS: UFP may be a leading contributor to the adverse respiratory effects of particulate air pollution and the effects increased with decreasing particle size.

Investigation of Mask Efficiency for Loose-Fitting Masks against Ultrafine Particles and Effect on Airway Deposition Efficiency.

Ultrafine particle (i.e., smaller than 100 nm) in the ambient air is a significant public health issue. The inhalation and deposition of ultrafine particles in the human airways can lead to various adverse health effects. Loose-fitting types of masks are commonly used by the general public in some developing countries for protecting against ultrafine particles in the ambient environment. This research conducted a series of laboratory chamber experiments using two sets of particle sizers and two mannequin heads to study the mask efficiency of selected loose-fitting masks. Results acquired demonstrated that the cloth mask showed a low mask efficiency against ultrafine particles with the mask efficiency generally less than 0.4. The KN95 presented a better mask efficiency among all tested masks with the mask efficiency overall larger than 0.5. In addition, the effect of mask-wearing on the change of ultrafine particle airway deposition efficiency was also investigated in this study. The ultrafine particle deposition efficiency in the airway section studied was found to decrease due to mask-wearing, and the decreases of the deposition efficiencies were similar among all loose-fitting masks tested.

Deposition potential of 0.003-10 µm ambient particles in the humidified human respiratory tract: Contribution of new particle formation events in Beijing.

Ultrafine particles (UFPs) usually explosive growth during new particle formation (NPF) events. However, the risk of exposure to UFPs on NPF days has been ignored due to the prevalence of mass-based air quality standards. In this study, the daily deposited doses, i.e., the daily deposited particle number dose (DPNd), mass dose (DPMd), and surface area dose (DPSd), of ambient particles in the human respiratory tract in Beijing were evaluated based on the particle number size distribution (3 nm-10 µm) from June 2018 to May 2019 utilizing a Multiple-Path Particle Dosimetry Model (MPPD) after the hygroscopic growth of particles in the respiratory tract had been accounted for. Our observations showed a high frequency (72.6%) of NPF on excellent air quality days, with daily mean PM2.5 concentrations less than 35 µg m-3. The daily DPNd on excellent air quality days was comparable with that on polluted days, although the DPMd on excellent air quality days was as low as 15.6% of that on polluted days. The DPNd on NPF days was ~1.3 times that on non-NPF days. The DPNd in respiratory tract regions decreased in the order: tracheobronchial (TB) > pulmonary (PUL) > extrathoracic (ET) on NPF days, while it was PUL > TB > ET on non-NPF days. The number of deposited nucleation mode particles, which were deposited mainly in the TB region (45%), was 2 times higher on NPF days than that on non-NPF days. Our results demonstrated that the deposition potential due to UFPs in terms of particle number concentrations is high in Beijing regardless of the aerosol mass concentration. More toxicological studies related to UFPs on NPF days, especially those targeting tracheobronchial and pulmonary impairment, are required in the future.