In Situ Reduction of Silver Nanoparticles/Urushiol-Based Polybenzoxazine Composite Coatings with Enhanced Antimicrobial and Antifouling Performances.

Marine anti-fouling coatings represent an efficient approach to prevent and control the marine biofouling. However, a significant amount of antifouling agent is added to improve the static antifouling performance of the coatings, which leads to an issue whereby static antifouling performance conflicts with eco-friendly traits. Herein, this work reports an in situ reduction synthesis of silver nanoparticles (AgNPs) within polymers to produce composite coatings, aiming to solve the aforementioned issue. Firstly, urushiol-based benzoxazine monomers were synthesized by the Mannich reaction, using an eco-friendly natural product urushiol and n-octylamine and paraformaldehyde as the reactants. Additionally, AgNPs were obtained through the employment of free radicals formed by phenolic hydroxyl groups in the urushiol-based benzoxazine monomers, achieved by the in situ reduction of silver nitrate in benzoxazine. Then, the urushiol-based benzoxazine/AgNPs composite coatings were prepared by the thermosetting method. AgNPs exhibit broad-spectrum and highly efficient antimicrobial properties, with a low risk to human health and a minimal environmental impact. The composite coating containing a small amount of AgNPs (≤1 wt%) exhibits effective inhibition against various types of bacteria and marine microalgae in static immersion, thereby displaying outstanding antifouling properties. This organic polymer and inorganic nanoparticle composite marine antifouling coating, with its simple preparation method and eco-friendliness, presents an effective solution to the conflict between static antifouling effectiveness and environmental sustainability in marine antifouling coatings.

PAA-PU Janus Hydrogels Stabilized by Janus Particles and its Interfacial Performance During Hemostatic Processing.

Hydrogel is a very promising dressing for hemostasis and wound healing due to its good adhesion and long-term moist environment. However, secondary injury caused by tissue adhesion due to homogeneous hydrogel cannot be ignored. The obvious interface existing in Janus hydrogel will weaken its asymmetric function. Here, a hierarchical adhesive polyacrylic acid-polyurushiol water-oil Janus hydrogel (JPs@PAA-PU) without adhesive layer is fabricated by one-pot method in the stabilization of polystyrene@silica-siliver Janus particles (JPs). The morphological structure, mechanical properties, anisotropic chemical composition, and adhesion performance, in vivo, and in vitro hemostatic properties of Janus hydrogel are investigated. Result shows that the obtained Janus hydrogel possesses obvious compartmentalization in microstructure, functional groups, and chemical elements. Janus hydrogel is provided with asymmetric interfacial toughness with top 52.45 ± 2.29 Kpa and bottom 7.04 ± 0.88 Kpa on porcine liver. The adhesion properties of PAA side to tissue, red blood cells and platelets, promoting effect of PU side on coagulation cascade reaction and its physical battier endow Janus hydrogel with shorter hemostatic time and less blood loss than control group. It also exhibits excellent antibacterial effects against Escherichia coli and Staphylococcus aureus (>90%). Janus hydrogel possesses biosafety, providing safety guarantee for clinical applications in the future.

Superior performance of oxygen vacancy-enriched Cu-Co3O4/urushiol-rGO/peroxymonosulfate for hypophosphite and phosphite removal by enhancing singlet oxygen.

The treatment of wastewater containing hypophosphite [P(I)] and phosphite [P(III)] is challenged by limitations of traditional Fenton oxidation such as low efficiency, secondary pollution and high costs. This study introduced a facile solvent-thermal method to synthesize Cu-Co3O4 nanoparticles uniformly loaded on graphene (Cu-Co3O4/U-rGO) through the reduction and coordination effects of urushiol (U). As prepared Cu-Co3O4/U-rGO exhibited excellent activity in activating peroxymonosulfate (PMS) for the oxidation of P(I)/P(III) to phosphate [P(V)] (0.229 min-1), along with high stability and reusability (91.5 % after 6 cycles), low metal leaching rate (Co: 0.2 mg/L, Cu: 0.05 mg/L), insensitivity to common anions in water and a wide pH range (3-11). The activation mechanism involved the synergistic effects from both urushiol and graphene, which promoted redox of Cu+/Cu2+ and Co2+/Co3+ and induced abundant oxygen vacancies for PMS activation to produce singlet oxygen. Furthermore, the Cu-Co3O4/U-rGO/PMS was also excellent in the oxidative removal of organic phosphorus. This study is expected to advance strategies for the treatment of P(I)/P(III)-rich wastewater and provide new insights for the development of low-cost, highly efficient heterogeneous catalysts with abundant oxygen vacancies.

Vortex-blending matrix solid-phase dispersion and UPLC-Q-TOF/MS were proposed to extract and examine the urushiols from Toxicodendron vernicifluum bark.

Toxicodendron vernicifluum bark has been used for many years as a component in foods and as a traditional herbal medication. Unfortunately, the presence of urushiols, which induce allergies, limits its application. This study used a vortex-blending matrix solid-phase dispersion microextraction technique to extract urushiols from Toxicodendron vernicifluum bark. HPLC was used to evaluate the amounts of the extracted urushiols (15:0, 15:1, 15:2, and 15:3). The modified magnetic adsorbent was prepared through an in situ coprecipitation method and characterized using a variety of techniques. The optimized extraction conditions are as follows: using magnetic Zeolite Socony Mobil-Five as an adsorbent, a 1:2 sample/adsorbent ratio, 2.5 min of vortex-blending time, 4 mL of 0.1% (V/V) trifluoroacetic acid-methanol as the elution solvent and 8 min of ultrasound time. There was good linearity and high repeatability in the method. Furthermore, the limits of detection for the urushiols ranged from 0.20 to 0.50 µg/mL. Under the optimized conditions, 50 compounds were identified by ultra high performance liquid chromatography and quadrupole time-of-flight mass spectrometry. These compounds included 8 phenolic acids, 9 monomeric urushiols, 11 urushiol dimers, 10 other components, and 11 flavonoids. The suggested approach, which has the advantages of few stages and high extraction efficiency over existing extraction procedures, is a potentially useful method for obtaining and evaluating urushiols in raw materials or extracts.

Sustainable Coating Based on Zwitterionic Functionalized Polyurushiol with Antifouling and Antibacterial Properties.

Zwitterionic polymer coatings facilitate the formation of hydration layers via electrostatic interactions on their surfaces and have demonstrated efficacy in preventing biofouling. They have emerged as a promising class of marine antifouling materials. However, designing multifunctional, environmentally friendly, and natural products-derived zwitterionic polymer coatings that simultaneously resist biofouling, inhibit protein adhesion, exhibit strong antibacterial properties, and reduce algal adhesion is a significant challenge. This study employed two diisocyanates as crosslinkers and natural urushiol and ethanolamine as raw materials. The coupling reaction of diisocyanates with hydroxyl groups was employed to synthesize urushiol-based precursors. Subsequently, sulfobetaine moieties were introduced into the urushiol-based precursors, developing two environmentally friendly and high-performance zwitterionic-functionalized polyurushiol antifouling coatings, denoted as HUDM-SB and IPUDM-SB. The sulfobetaine-functionalized polyurushiol coating exhibited significantly enhanced hydrophilicity, with the static water contact angle reduced to less than 60°, and demonstrated excellent resistance to protein adhesion. IPUDM-SB exhibited antibacterial efficacy up to 99.9% against common Gram-negative bacteria (E. coli and V. alginolyticus) and Gram-positive bacteria (S. aureus and Bacillus. sp.). HUDM-SB achieved antibacterial efficacy exceeding 95.0% against four bacterial species. Furthermore, the sulfobetaine moieties on the surfaces of the IPUDM-SB and HUDM-SB coatings effectively inhibited the growth and reproduction of algal cells by preventing microalgae adhesion. This zwitterionic-functionalized polyurushiol coating does not contain antifouling agents, making it a green, environmentally friendly, and high-performance biomaterial-based solution for marine antifouling.

Effect of etchant containing an Urushiol monomer from lacquer sap on dentin biostability and bonding performance.

Objectives: This study aimed to evaluate the effectiveness of urushiol as an additive to surface acid etchant on dentin structure, by assessing the biostability of dentin, and determine the bonding strengths of dentin and enamel to the composite in the complicated oral microecology. Methods: Etchants with different concentrations of urushiol (0.5, 1, or 3 wt%) were formulated and tested for their bonding performance. Demineralized dentin beams that were etched with experimental etchants were incubated in simulated body fluid solutions by evaluating the weight decrement after 1 month. The effects of urushiol on dentin and matrix metalloproteinases were confirmed by scanning electron microscopy (SEM). Moreover, the antibiotic actions of urushiol on the common cariogenic bacteria Streptococcus mutans, Streptococcus sanguinis, and Streptococcus gordonii as well as the biofilm were evaluated, and its effect on bacterial morphology was observed by scanning electron microscopy. Finally, enamel and dentin specimens were prepared from human molars to determine the depth of demineralization by the etchants and the relationship with the resin bond strengths to enamel and dentin (µTBS) and the morphology of the bonding interface. Results: Urushiol could interact with dentine and inhibit collagenase activity, resulting in biostable dentine. The application of the etchants containing 0.5, 1, or 3 wt% urushiol significantly improved the durability of the dentin bonding interface with its instinctive antibacterial property (p < 0.05). Conclusion: Urushiol not only improves dentin stability by interacting with collagen and inactivating MMP activity but also plays a role in the antibacterial effects in the complicated oral microecology. The effectiveness of urushiol etchant prolongs the longevity of bonded dental restorations without compromising clinical operation time.

Glancing at the birth of a galaxy of scientists from Riko Majima.

Riko Majima published seven papers in this journal, and seeing these papers and their surrounding contexts allows us to glance at the birth of a galaxy of scientists.

Ultrastrong and Tough Urushiol-Based Ionic Conductive Double Network Hydrogels as Flexible Strain Sensors.

Ionic conductive hydrogels have attracted increasing research interest in flexible electronics. However, the limited resilience and poor fatigue resistance of current ionic hydrogels significantly restrict their practical application. Herein, an urushiol-based ionic conductive double network hydrogel (PU/PVA-Li) was developed by one-pot thermal initiation polymerization assisted with freeze-thaw cycling and subsequent LiCl soaking. Such a PU/PVA-Li hydrogel comprises a primary network of covalently crosslinked polyurushiol (PU) and a secondary network formed by physically crosslinked poly(vinyl alcohol) (PVA) through crystalline regions. The obtained PU/PVA-Li hydrogel demonstrates exceptional mechanical properties, including ultrahigh strength (up to 3.4 MPa), remarkable toughness (up to 1868.6 kJ/m3), and outstanding fatigue resistance, which can be attributed to the synergistic effect of the interpenetrating network structure and dynamic physical interactions between PU and PVA chains. Moreover, the incorporation of LiCl into the hydrogels induces polymer chain contraction via ionic coordination, further enhancing their mechanical strength and resilience, which also impart exceptional ionic conductivity (2.62 mS/m) to the hydrogels. Based on these excellent characteristics of PU/PVA-Li hydrogel, a high-performance flexible strain sensor is developed, which exhibits high sensitivity, excellent stability, and reliability. This PU/PVA-Li hydrogel sensor can be effectively utilized as a wearable electronic device for monitoring various human joint movements. This PU/PVA-Li hydrogel sensor could also demonstrate its great potential in information encryption and decryption through Morse code. This work provides a facile strategy for designing versatile, ultrastrong, and tough ionic conductive hydrogels using sustainable natural extracts and biocompatible polymers. The developed hydrogels hold great potential as promising candidate materials for future flexible intelligent electronics.

Zn2+ @Polyvinylpyrrolidone and Urushiol Preparation of Nanofibrous Membranes and Their Synergistic Effect.

In this study, lacquer is gathered from a lacquer tree and rotary evaporation is used to remove impurities to obtain urushiol. Next, 10 mL of anhydrous ethanol serves as the solvent for blending polyvinylpyrrolidone (PVP) at a specified content (0.7 g and 0.2-0.7 g urushiol) to form an electrospinning solution. Electrospinning is carried out with a voltage of 18 kV to prepare PVP/urushiol nanofibrous membranes. At a ratio of 7/4, the PVP/urushiol nanofibrous membranes are not eroded in 98% sulfuric acid and these membranes also demonstrate a 50-60% antibacterial effect against Staphylococcus aureus and Escherichia coli. Moreover, the antibacterial effect can be boosted to 98% with the incorporation of zinc ions. The results indicate that anhydrous ethanol can remove the sensitization of urushiol from PVP/urushiol membranes. Furthermore, animal test results indicate that when rats are in contact with PVP/urushiol anhydrous ethanol for 48 h, their skins are free from dark brown skin allergy. The presence of PVP eliminates the sensitization of urushiol, and the nanofibrous membranes demonstrate low toxicity. Hence, urushiol is the only natural material that enables PVP to withstand 98% sulfuric acid as well as acquire hydrolyzability, thereby qualify PVP as a medical material.

Design, Synthesis, and Biological Evaluation of New Urushiol Derivatives as Potent Class I Histone Deacetylase Inhibitors.

In the present study, a novel series of 11 urushiol-based hydroxamic acid histone deacetylase (HDAC) inhibitors was designed, synthesized, and biologically evaluated. Compounds 1-11 exhibited good to excellent inhibitory activities against HDAC1/2/3 (IC50 : 42.09-240.17 nM) and HDAC8 (IC50 : 16.11-41.15 nM) in vitro, with negligible activity against HDAC6 (>1409.59 nM). Considering HDAC8, docking experiments revealed some important features contributing to inhibitory activity. According to Western blot analysis, select compounds could notably enhance the acetylation of histone H3 and SMC3 but not-tubulin, indicating their privileged structure is appropriate for targeting class I HDACs. Furthermore, antiproliferation assays revealed that six compounds exerted greater in vitro antiproliferative activity against four human cancer cell lines (A2780, HT-29, MDA-MB-231, and HepG2, with IC50 values ranging from 2.31-5.13 µM) than suberoylanilide hydroxamic acid; administration of these compounds induced marked apoptosis in MDA-MB-231 cells, with cell cycle arrest in the G2/M phase. Collectively, specific synthesized compounds could be further optimized and biologically explored as antitumor agents.

Urushiol-Based Benzoxazine Containing Sulfobetaine Groups for Sustainable Marine Antifouling Applications.

Benzoxazine resins are new thermosetting resins with excellent thermal stability, mechanical properties, and a flexible molecular design, demonstrating promise for applications in marine antifouling coatings. However, designing a multifunctional green benzoxazine resin-derived antifouling coating that combines resistance to biological protein adhesion, a high antibacterial rate, and low algal adhesion is still challenging. In this study, a high-performance coating with a low environmental impact was synthesized using urushiol-based benzoxazine containing tertiary amines as the precursor, and a sulfobetaine moiety into the benzoxazine group was introduced. This sulfobetaine-functionalized urushiol-based polybenzoxazine coating (poly(U-ea/sb)) was capable of clearly killing marine biofouling bacteria adhered to the coating surface and significantly resisting protein attachment. poly(U-ea/sb) exhibited an antibacterial rate of 99.99% against common Gram negative bacteria (e.g., Escherichia coli and Vibrio alginolyticus) and Gram positive bacteria (e.g., Staphylococcus aureus and Bacillus sp.), with >99% its algal inhibition activity, and it effectively prevented microbial adherence. Here, a dual-function crosslinkable zwitterionic polymer, which used an "offensive-defensive" tactic to improve the antifouling characteristics of the coating was presented. This simple, economic, and feasible strategy provides new ideas for the development of green marine antifouling coating materials with excellent performance.

Chitosan-Urushiol nanofiber membrane with enhanced acid resistance and broad-spectrum antibacterial activity.

Due to the large specific surface area and rich pore structure, chitosan nanofiber membrane has many advantages over conventional gel-like or film-like products. However, the poor stability in acidic solutions and relatively weak antibacterial activity against Gram-negative bacteria severely restrict its use in many industries. Here, we present a chitosan-urushiol composite nanofiber membrane prepared by electrospinning. Chemical and morphology characterization revealed that the formation of chitosan-urushiol composite involved the Schiff base reaction between catechol and amine groups and the self-polymerization of urushiol. The unique crosslinked structure and multiple antibacterial mechanisms endowed the chitosan-urushiol membrane with outstanding acid resistance and antibacterial performance. After immersion in HCl solution at pH 1, the membrane maintained its intact appearance and satisfactory mechanical strength. In addition to its good antibacterial performance against Gram-positive Staphylococcus aureus (S. aureus), the chitosan-urushiol membrane exhibited synergistic antibacterial activity against Gram-negative Escherichia coli (E. coli) that far exceeded that of neat chitosan membrane and urushiol. Moreover, cytotoxicity and hemolysis assays revealed that the composite membrane had good biocompatibility similar to that of neat chitosan. In short, this work provides a convenient, safe, and environmentally friendly method to simultaneously enhance the acid resistance and broad-spectrum antibacterial activity of chitosan nanofiber membranes.

Evaluation and Management of Toxicodendron Dermatitis in the Emergency Department: A Review of Current Practices.

Toxicodendron dermatitis is an underappreciated disease seen in the emergency department. Although self-limiting, symptoms can be distressing and can last for weeks if untreated, particularly with re-exposure. Continuing research has improved our understanding of specific inflammatory markers that are associated with exposure to urushiol-the compound responsible for Toxicodendron dermatitis-although consensus for treatment remains varied and poorly supported. Owing to the lack of recent primary literature on the topic, many providers rely on historical precedent, expert opinion, and personal experience when treating this disease. This article provides a narrative review of the literature currently available on the effects of urushiol on key molecular and cellular functions and the prevention and treatment of Toxicodendron dermatitis.

Relative quantification of phenolic compounds in exocarp-mesocarp and endocarp of sumac (Toxicodendron vernicifluum) combined with transcriptome analysis provides insights into glycosylation of flavonoids and biflavonoid biosynthesis.

The pericarp of fruit can be differentiated into endocarp, mesocarp, and exocarp. To explore the differences in gene expression and metabolites in different tissues of the pericarp, the fruits of sumac (Toxicodendron vernicifluum) were separated into endocarp and mesocarp-exocarp. The metabolites and transcriptome of exocarp-mesocarp and endocarp of Toxicodendron vernicifluum were analyzed by HPLC-QTOF-MS/MS and RNA sequencing, respectively. A total of 52 phenolic compounds were identified, including 3 phenylpropane derivatives, 10 urushiol compounds and 39 flavonoids. The exocarp-mesocarp contained more urushiol compounds and flavonoid glycosides while the endocarp contained more biflavonoids, such as rhusflavone and dihydromorelloflavone. The characteristic component of endocarp was rhusflavone and the characteristic component of exocarp-mesocarp was urushiol (triene). Most of the genes involved in flavonoid synthesis pathway were upregulated in endocarp compared with exocarp-mesocarp and positively correlated with the content of flavonoids. The candidate genes related to the synthesis of components of flavonoid glycosides and biflavonoids were screened. Metabolomic and transcriptomic analyses provide new insights into the synthesis and distribution of flavonoid glycosides and biflavonoids in the fruits of Toxicodendron vernicifluum.

Quantitative Detection of Thitsiol and Urushiol as Markers from the Gluta usitata Lacquer Tree Using HPLC.

Lacquer sap has been traditionally used in coatings and artwork. Suitable types of lacquer are required to preserve and restore artifacts. Recently, unsuitable cashew nut shell liquid (CNSL) has often been mixed with lacquer sap, so it is necessary to identify the characteristics of lacquer sap by the production area. However, research is still focused on urushiol and laccol. In this study, Myanmarese lacquer sap collected from Gluta usitata, which contains thitsiol as the main component, was analyzed by HPLC to quantify thitsiol using the standards 3-(10-phenyldecyl) benzene-1,2-diol (thitsiol 16) and 3-(8Z,11Z-pentadecadienyl)-benzenediol (urushiol 15:2) as markers, and calibration curves were plotted. The coefficients of determination (R2) for thitsiol 16 and urushiol 15:2 were 0.9985 and 0.9983, respectively. In addition, a blind test was conducted to confirm that accurate quantitative analysis was possible even when Myanmarese lacquer was mixed with lacquer from another production area, which contained urushiol as the main component, and CNSL, which contained cardol, a completely different catechol. Quantitative analysis of thitsiol 16 and urushiol 15:2 in Myanmarese lacquer using HPLC can be used to evaluate the quality of lacquer sap and for more sophisticated activities such as restoration by classifying differences in lacquer sap by the production area.

Polyphenol-Enriched Extract of Lacquer Sap Used as a Dentine Primer with Benefits of Improving Collagen Cross-Linking and Antibacterial Functions.

Commercial dentin adhesive systems are applied to restorations due to their resistant bonding properties, but they suffer from the lack of bioactivity and are prone to hydrolysis. Therefore, to overcome these limitations, an eco-friendly natural monomer, urushiol, was adopted to be a primer in dentin bonding due to its interaction with collagen and antibacterial activity, preventing further hydrolysis development. First, urushiol was determined to be capable of improving the biological stability of dentin collagen through cross-linking. Using high-fidelity analytical chemistry techniques, such as Fourier transform infrared spectroscopy, we quantified the effects of urushiol on collagen molecules. It could also effectively decrease weight loss after collagenase ingestion by improving the stability of dentin. Moreover, urushiol inhibited Streptococcus mutans growth as well as its biofilm formation. Finally, we demonstrated that the urushiol primer could improve the bonding strength, particularly after aging. The cross-linking and antibacterial functions of urushiol have provided promising developmental prospects for biomaterials in dentin adhesion.

Black-Spot Toxicodendron Dermatitis With Varied Presentation.

This article describes the clinical presentation, differential diagnosis, and treatment of 2 unrelated cases with different presentations of black-spot Toxicodendron dermatitis. In the first case, a healthy 7-y-old male presented with a rash consisting of black dots with localized surrounding erythema on the left arm. The rash then progressed to a vesicular, pinpoint, raised rash spreading to the face, arms, and neck. In the second case, a 4-y-old male presented with non-pruritic, black, flat, non-erythematous lesions that did not progress. This patient's older sibling had been diagnosed with poison ivy 1 wk prior, and they attended the same child care where the poison ivy was thought to be acquired. In both cases, diagnosis of black-spot Toxicodendron dermatitis was made. The black spot of Toxicodendron dermatitis is caused by urushiol oxidation on exposure to air. The subject may or may not go on to develop allergic contact dermatitis after the exposure. Diagnosis of this dermatitis is made on clinical presentation, with careful consideration of history, distribution, and lesion morphology. When allergic dermatitis does develop as in the first case, systemic treatment with oral steroids is recommended. In both of these cases the black dots completely resolved in 2 to 3 wk. Dermatologic referral for dermoscopy and biopsy may be necessary if the dermatosis does not resolve as anticipated.

Metal Ion-Catalyzed Low-Temperature Curing of Urushiol-Based Polybenzoxazine.

In this work, urushiol-based polybenzoxazine is cured by the Lewis acid (FeCl3, AlCl3, and CuCl2) at low temperature instead of high thermal curing temperature. The effect of the Lewis acid on structures and properties of the polymers is revealed. The relating urushiol-based benzoxazine monomer (BZ) was synthesized by natural urushiol, formaldehyde, and n-octylamine. The monomer was reacted with the Lewis acid with a molar ratio of 6:1 (Nmonomer: NMetal) at 80°C to obtain films that can be cured at room temperature. The chemical structures of benzoxazine monomers were identified by Fourier-transform infrared spectroscopy (FTIR) and 1H nuclear magnetic resonance spectroscopy (1H-NMR). The interaction between the metal ion and the polymers is revealed by X-ray photoelectron spectroscopy (XPS) and attenuated total reflectance-FTIR (ATR-FTIR). The effect of the Lewis acid on the mechanical properties, wettability, and thermal stability was investigated. The results show that the benzoxazine cured by Cu2+ has a better performance than that cured by Al3+ and Fe3+.

Urushiol V Suppresses Cell Proliferation and Enhances Antitumor Activity of 5-FU in Human Colon Cancer Cells by Downregulating FoxM1.

Colorectal cancer (CRC) is one of the most common malignant tumor. 5-FU is commonly used for the treatment of CRC. However, the development of drug resistance in tumor chemotherapy can seriously reduce therapeutic efficacy of 5-FU. Recent data show that FoxM1 is associated with 5-FU resistance in CRC. FoxM1 plays a critical role in the carcinogenesis and drug resistance of several malignancies. It has been reported that urushiol V isolated from the cortex of Rhus verniciflua Stokes is cytotoxic to several types of cancer cells. However, the underlying molecular mechanisms for its antitumor activity and its potential to attenuate the chemotherapeutic resistance in CRC cells remain unknown. Here, we found that urushiol V could inhibit the cell proliferation and induced S-phase arrest of SW480 colon cancer cells. It inhibited protein expression level of FoxM1 through activation of AMPK. We also investigated the combined effect of urushiol V and 5-FU. The combination treatment reduced FoxM1 expression and consequently reduced cell growth and colony formation in 5-FU resistant colon cancer cells (SW480/5-FUR). Taken together, these result suggest that urushiol V from Rhus verniciflua Stokes can suppress cell proliferation by inhibiting FoxM1 and enhance the antitumor capacity of 5-FU. Therefore, urushiol V may be a potential bioactive compound for CRC therapy.