The Role of Vibrators in Women's Pelvic Health: An Alluring Tool to Improve Physical, Sexual, and Mental Health.

INTRODUCTION AND HYPOTHESIS: In limited studies vibrators have been shown to improve sexual function and pelvic floor health; however, there are even fewer studies on the effect of vibrator use on overall genitourinary and mental health. To investigate the effect of regular vibrator use on sexual, genitourinary, and mental health in addition to quality of life. METHODS: We performed a prospective pilot study of women aged 18 to 80 years recruited from a urogynecology clinic. Study participants were instructed to use a vibrator according to the protocol. Sexual function, pelvic floor function, mental health, and pelvic examination were assessed at the initial visit and at 3 months' follow-up using validated questionnaires. RESULTS: Of the 79 participants enrolled in the study, 53 women (66%) completed the study. The mean age of the participants was 54.7 years (range 19-80 years), and the majority of participants were white (n = 59, 74.7%), post-menopausal (n = 48, 60.8%), and not receiving systemic (n = 63, 79.7%) or local (n = 63, 79.7%) hormone therapy. Sexual function significantly improved over time (p = 0.002), whereas the rate of bothersome pelvic organ prolapse symptoms and pain scores significantly decreased (p = 0.034 and 0.0008 respectively). Rates of urge urinary incontinence decreased although this was not statistically significant (p = 0.059). There was a significant improvement in the gross appearance of lichen sclerosus lesions (p = 0.025) and in the severity of vaginal atrophy (p = 0.018). Rates of depression were significantly decreased (p = 0.011). CONCLUSIONS: Vibrator use was associated with improved sexual, genitourinary, and mental health.

An inexpensive "do-it-yourself" device for rapid generation of uniform tumor spheroids.

Three-dimensional (3D) cancer cell culture models such as tumor spheroids better recapitulate in vivo tumors than conventional two-dimensional (2D) models. However, two major challenges limit the routine use of 3D tumor spheroids. Firstly, most existing methods of generating tumor spheroids are not high-throughput. Secondly, tumor spheroids generated using current methods are highly variable in dimension. Here, we describe a simple 'Do-It-Yourself (DIY)' device that can be assembled for less than $7 of parts and generate uniform tumor spheroids in a high-throughput manner. We used a simple phone coin vibrating motor to superimpose the vibration for breaking a laminar jet of cell-loaded alginate solution into equally sized spherical beads. We generated 3,970 tumor spheroids/min, which exhibited a hypoxic core recapitulating in vivo tumors and could be used to test the diffusion efficacy of anticancer drugs. Such low-cost, easy-to-fabricate, simple-to-operate systems with high-throughput outcomes are essential to democratize and standardize cancer research.

Research on Stacked Piezoelectric Cymbal Vibrator.

As demand for haptic feedback increases, piezoelectric materials have become one of the best candidate materials due to their small size, high electromechanical coupling coefficient, and fast response. A stacked piezoelectric cymbal vibrator is proposed based on the common cymbal-type transducer, which is composed of a piezoelectric stack to drive and a cymbal disk to amplify displacement. A coupling theoretical model between the piezoelectric stack and the cymbal-type structure is established. The longitudinal and radial displacements of the stacked piezoelectric cymbal vibrator are calculated in the low frequency range (<1000 Hz) by the theoretical model and the finite element method. The theoretical and numerical results are in good agreement. The results show that the radial displacement can be converted into longitudinal displacement and then effectively amplified by the cymbal disk with an amplification ratio of 30. The feature is conducive to its widespread application in the field of consumer electronics.

Rectal Foreign Bodies: A 10-Year Review of the National Electronic Injury Surveillance System.

Introduction Rectal foreign bodies may result in significant morbidity, potentially necessitating surgical intervention and ostomy creation. The sensitive nature of the diagnosis may lead to inaccurate patient history and possible delay in diagnosis. Currently, there is a paucity of large national studies addressing this diagnosis. Therefore, we present national data describing the demographics and incidence of patients presenting with rectal foreign bodies. Methods The National Electronic Injury Surveillance System (NEISS) was utilized to collect data regarding rectal foreign bodies. Ten years of data were collected from 2012 to 2021. Inclusion criteria focused on the diagnosis of "foreign body" coupled with pelvic and lower torso injuries. Exclusion criteria encompassed patients without a rectal foreign body clearly identified in the narrative. Patients were compared based on disposition as low severity (treated/examined and released or left without being seen) or high severity (treated and admitted/hospitalized, held for observation, or transferred to another facility). General descriptive and inferential analyses were performed regarding demographics and dispositions. Results A total of 1,806 emergency department (ED) visits were identified for inclusion. Patients ranged in age from 0 to 93 years, with a mean age of 30 years. The largest age group identified was 11-15 and 21-25 years. Most patients were male (64.6%) and white (47.1%). The most common foreign bodies were massage devices and vibrators (22.7%), jewelry (8.1%), pens and pencils (4.4%), fishing gears (activity, apparel, or equipment) (3.7%), and nonglass bottles or jars (2.6%). Patients requiring admission, observation, or transfer differed from those patients that were discharged from the ED by age, sex, race, and product involved. Discussion Rectal foreign bodies are a rare diagnosis with a growing incidence. Though the most common objects are massage devices and vibrators consistent with sexual stimulation devices, there are limited product guidelines for safe use. Further studies to help identify at-risk persons, safety precautions, and manufacturing guidelines may help prevent potential morbidity associated with rectal foreign bodies.

Uso de microvibración e inhibidores de la catepsina K en tratamientos de regeneración ósea dental / Use of micro-vibration and cathepsin K inhibitors in dental bone regeneration treatments

Introducción: el hueso está en remodelación constante para mantener la estructura del esqueleto, tener un ciclo de resorción por los osteoclastos y formación de hueso nuevo a cargo de los osteoblastos; el hueso también es susceptible a enfermedades sistémicas, traumas, edad y trastornos genéticos que afectarán el remodelado óseo, produciendo una pérdida masiva de masa ósea regulado por hormonas, citocinas, enzimas, etcétera. El objetivo es realizar una revisión sistemática de artículos que muestren cambio o alteración al utilizar tratamientos con microvibraciones y farmacológicos sobre la catepsina K en el hueso alveolar. Material y métodos: para realizar una comparación entre la efectividad del tratamiento a base de microvibraciones y con inhibidores de la catepsina K, se realizó una revisión sistemática en nueve bases de datos (Wiley Online Library, PubMed, Google Academic, Scopus, ScienceDirect, SciELO, Medline, EBSCO y Springer Link). La población de estudio fueron ratas y ratones. Resultados: en este estudio se incluyeron 20 artículos cuya investigación se realizó en estudios clínicos. En los resultados podemos observar cómo todos los tratamientos de alguna forma mejoran el proceso de remodelado óseo. Es difícil comparar cuál de los tratamientos dentro de cada grupo es mejor que otro, debido a que los resultados expresados son cualitativos. Conclusión: acorde a los resultados expresados se opta por realizar un tratamiento con microvibraciones debido a que el uso de inhibidores de la catepsina K aún no se encuentra completamente desarrollado y no se comprenden sus consecuencias debido a su manera sistémica de actuar (AU)

Introduction: the bone is in constant remodeling to maintain the skeletal structure, having a cycle of resorption by osteoclasts and formation of new bone by osteoblasts, the bone is also susceptible to systemic diseases, trauma, age and genetic disorders that affect bone remodeling, producing a massive loss of bone mass regulated by hormones, cytokines, enzymes, etcetera. The objective is to perform a systematic review of articles that show a change or alteration when using micro-vibration and pharmacological treatments on cathepsin K in the alveolar bone. Material and methods: in order to make a comparison between the effectiveness of micro-vibration and cathepsin K inhibitor treatments, a systemic review was carried out in nine databases (Wiley Online Library, PubMed, Google Academic, Scopus, ScienceDirect, SciELO, Medline, EBSCO and Springer Link). The study population was rats and mice. Results: this study included 20 articles whose research was carried out in clinical studies. In the results we can see how all the treatments in some way improve the bone remodeling process, it is difficult to compare which treatment within each group is better than the other, because the results expressed are qualitative. Conclusion: according to the results expressed, it is decided that it is better to perform a treatment with micro vibrations because the use of cathepsin K inhibitors are not yet fully developed and their consequences are not understood due to their systemic way of acting (AU)

Sonochemical Degradation of Gelatin Methacryloyl to Control Viscoelasticity for Inkjet Bioprinting.

Inkjet printing enables the mimicry of the microenvironment of natural complex tissues by patterning cells and hydrogels at a high resolution. However, the polymer content of an inkjet-printable bioink is limited as it leads to strong viscoelasticity in the inkjet nozzle. Here it is demonstrated that sonochemical treatment controls the viscoelasticity of a gelatin methacryloyl (GelMA) based bioink by shortening the length of polymer chains without causing chemical destruction of the methacryloyl groups. The rheological properties of treated GelMA inks are evaluated by a piezo-axial vibrator over a wide range of frequencies between 10 and 10 000 Hz. This approach enables to effectively increase the maximum printable polymer concentration from 3% to 10%. Then it is studied how the sonochemical treatment effectively controls the microstructure and mechanical properties of GelMA hydrogel constructs after crosslinking while maintaining its fluid properties within the printable range. The control of mechanical properties of GelMA hydrogels can lead fibroblasts more spreading on the hydrogels. A 3D cell-laden multilayered hydrogel constructs containing layers with different physical properties is fabrictated by using high-resolution inkjet printing. The sonochemical treatment delivers a new path to inkjet bioprinting to build microarchitectures with various physical properties by expanding the range of applicable bioinks.

Bringing sex toys out of the dark: exploring unmitigated risks.

A majority of American adults report having used sex toys, which, by design, interact with intimate and permeable body parts yet have not been subject to sufficient risk assessment or management. Physical and chemical data are presented examining potential risks associated with four types of currently available sex toys: anal toy, beads, dual vibrator, and external vibrator. A standardized abrasion machine made real-time breakdown of products into microplastics and nanoplastics. The microplastics from the sex toys were then solvent extracted and analyzed using GC-MS. Rates of microplastics and nanoplastics released during abrasion testing from most microplastic release to least was the anal toy, beads, dual vibrator, external vibrator. Both micro- and nanoplastics particles were generated following the abrasion test, with the 50 percentile diameters (D50) ranging from the anal beads at 658.5 µm, dual vibrator at 887.83 µm, anal toy at 950 µm, and external vibrator at 1673.33 µm. The material matrix of each product was analyzed using ATR-FTIR, with results identifying the anal toy as polyethylene terephthalate (PET), the anal beads as polyvinyl chloride (PVC), the external vibrator as a silicone blend (polydimethylsiloxane [PDMS]), and the dual vibrator as a rubber mixture (polyisoprene). After extraction, phthalates known to be endocrine disruptors were present in all tested sex toys at levels exceeding hazard warnings. Analogous findings have been reported for similar materials that, when incorporated into other product categories, are subject to regulatory scrutiny in both the US and EU. This data set is not intended to be representative of sex toys as an entire class of products, nor are the abrasion experiments claiming to simulate exact use conditions. However, these exploratory data frame potential concerns, highlighting research questions and the need for prompt prioritization of protective action. Therefore, future studies and multi-stakeholder action are needed to understand and reduce risk for this class of products. Supplementary Information: The online version contains supplementary material available at 10.1186/s43591-023-00054-6.

Design and performance evaluation of a miniature I-shaped linear ultrasonic motor with two vibrators.

In this study, a novel miniature I-shaped linear ultrasonic motor is proposed. The motor is constructed by two rectangular piezoelectric vibrators which are mounted in parallel with the slider to make the structure look like the letter "I". The symmetric and antisymmetric modes of the motor based on the first-order flexural vibrations of the two vibrators are chosen as the working modes. The finite element method is adopted to optimize the structure and study the vibration behavior of the motor. A prototype of the proposed linear ultrasonic motor is fabricated and its mechanical characteristics are tested. The dimension of the stator is 39.8 × 17.6 × 6 mm3 and the weight of the prototype is only 18.2 g. The typical outputs of the prototype are maximum speed of 364 mm/s, maximum thrust of 500 g and thrust-weight ratio of 24.47. The experimental results confirm that the developed linear ultrasonic motor has the advantages of structural design and miniaturization.

Effects of aging on ocular vestibular-evoked myogenic potential using ER-3A insert earphone and B81 bone vibrator.

Purpose: Aging is a process associated with degeneration and dysfunction of peripheral vestibular system or apparatus. This study aimed to investigate the influence of aging on ocular vestibular-evoked myogenic potential (oVEMP) response rates and recording parameters using the B81 bone vibrator and compare them with air conduction stimuli (ACS) oVEMP response characteristics. Methods: In 60 healthy participants aged 10-71 years (mean age 39.9; 29 male participants), the oVEMP response was elicited using a B81 bone vibrator and an ER-3A insert earphone. The effects of age and stimulus on oVEMP response rates and recording parameters were evaluated. Results: Response rates and amplitudes declined with aging using either ACS or bone-conducted vibration (BCV) stimulation, particularly in individuals over 60 years of age, whereas thresholds increased and N1 latencies were prolonged. BCV showed fewer risks of absent oVEMP response than ACS (p = 0.002). BCV acquired higher amplitudes (p < 0.001), lower thresholds, and shorter N1 and P1 latencies (all p < 0.001) than ACS. Conclusions: The absence of an oVEMP response may be attributed to aging rather than a concurrent vestibular disorder. B81-BCV likely produces higher mechanical drives to the vestibular hair cells at safer and non-traumatic levels compared with ACS and therefore may be more likely to evoke a response in the elderly cohort, whose vestibular function and mechanical sensitivity have declined. Thus, B81-BCV stimulation is more effective and safer to elicit oVEMPs, and it should be recommended when ACS fails in the clinic, particularly in the elderly population.

Simulation Analysis and Performance Test of a Compressible Piezoelectric Pump Fluid Cavity.

The large load loss of piezoelectricity pumps leads to fluid energy in the fluid chamber during fluid transportation. In this paper, the output performance of a piezoelectricity pump is improved by changing the structure parameters of the fluid chamber to reduce the fluid load. The mechanism of fluid flow energy loss in the body cavity of hydraulic pumps is simulated and analyzed, and the influence of the dimensions of the inlet and outlet valves and the height of the cavity on fluid energy loss is obtained. The flow rate and pressure of inlet and outlet valves with different cavity heights and different driving frequencies are obtained. The results show that the flow rate and output pressure of the hydraulic pump are optimized when the cavity height is 3 mm, and the inlet and outlet valve diameters are 2.5 mm.

B81 Bone Vibrator-Induced Vestibular-Evoked Myogenic Potentials: Normal Values and the Effect of Age.

Objective: To define the normal values and examine the influence of aging on B81 bone vibrator-induced cervical vestibular-evoked myogenic potentials (B81-cVEMPs) and ocular vestibular-evoked myogenic potentials (B81-oVEMPs). Methods: Seventy healthy subjects, divided into seven groups according to their ages, were enrolled in this study. The 4-9-, 10-19-, 20-29-, 30-39-, 40-49-, 50-59-, and 60-70-year-old participants were divided into groups I-VII, respectively. B81-cVEMP and B81-oVEMP were recorded in each group. Results: The B81-cVEMP response rates for groups I-VII were 100, 100, 100, 100, 95, 95, and 75%, respectively, with significant differences only between groups I-VI and group VII (p = 0.047, p < 0.05). The B81-oVEMP response rates for groups I-VII were 100, 100, 100, 100, 70, 65, and 40%, respectively, with significant differences only between groups I-IV and groups V-VII (p = 0.020, p = 0.008, p = 0.000; p < 0.05). The threshold, P13, and N23 latencies of B81-cVEMP positively correlated with age (r = 0.756, p = 0.000; r = 0.357, p = 0.003; r = 0.316, p = 0.009; p < 0.05). The raw amplitudes and corrected amplitudes negatively correlated with age (r = -0.641, p = 0.000; r = -0.609, p = 0.000, p < 0.05). For B81-oVEMP, the corrected amplitudes negatively correlated with age (r = -0.638, p = 0.000, p<0.05), but the threshold and N10 latency positively correlated with age (r = 0.768, p = 0.000; r = 0.334, p = 0.009, p < 0.05). Moreover, the interaural asymmetry ratio did not significantly correlate with age for B81-cVEMP and B81-oVEMP. Conclusion: As age increased, the B81-cVEMP response rate decreased, the thresholds increased, P13 and N23 latencies were prolonged, and the raw amplitude and corrected amplitude decreased. The B81-oVEMP response rate and corrected amplitude decreased, the thresholds increased, and N10 latency was prolonged with age. These changes are probably due to the occurrence of morphological and functional changes in the vestibular system with aging. Therefore, we suggest establishing different reference values according to different age groups when evaluating the VEMP results in patients with vestibular diseases.

How Customers Evaluate Genitalia versus Torso Sex Toys on Amazon.com: A Content Analysis of Product Reviews.

Sex toys are widely marketed on the Internet. Browsing for, buying, and reviewing sex toys online are popular cybersexual activities. The aim of this study was to investigate consumers' experiences with different types of realistic sex toys via online product reviews on Amazon.com. Toys were categorized in a 2 × 2 design regarding their representation of the human body (genitalia sex toys representing reproductive organs only versus torso toys representing larger parts of the human body) and their depiction of gender (toys representing female versus male body parts). Informed by feminist discourses on sex toys as well as sexual script theory and consumer research, the study explored the overall evaluations (RQ1), most frequently addressed characteristics (RQ2), usage patterns (RQ3), and perceived effects (RQ4) of the four groups of sex toys. A quantitative manual content analysis of N = 778 online sex toy reviews showed that 79% of consumers gave popular realistic sex toys positive ratings (RQ1). The most frequently mentioned characteristics were quality, material, and shape (RQ2). Most reviewers were men and used sex toys for solo sexual activities (RQ3). An additional qualitative analysis of n = 69 reviews addressing the perceived effects of sex toy use revealed that consumers predominantly mentioned positive effects (RQ4). Genitalia sex toys received better evaluations than torso sex toys and were perceived to be complementary tools to enhance sexual arousal, whereas the use of torso toys entailed anthropomorphization and symbolic social interactions. Implications for future research and design of different types of sex toys are discussed.

Photoelectron Spectroscopy of OH--Anion-Water Clusters Generated by Ultrasonic Nebulizer.

Investigating molecules in the gas phase is the only way to discover their intrinsic molecular properties; however, it is challenging to produce the gaseous phase of large-molecule chemicals. Thermal evaporation is typically used to convert molecules into gases, but it is still challenging to study ionic molecules in solutions in the gas phase. Electrospray ionization is one of the best methods to generate molecules in the gas phase, and it is uniquely capable of studying large biomolecules, including proteins. However, the molecular temperature required to study the spectroscopic properties of the molecules is very high. In this study, we developed a new, simple evaporation method using an ultrasonic nebulizer to obtain gas-phase molecules. Using this new equipment, we observed OH- anions and their water clusters in the gas phase and obtained their photoelectron spectra. We observed that the vertical electron-detachment energy (VDE) of OH- was 1.90 ± 0.05 eV and the VDEs of its water clusters and OH- (H2O)n (n = 1-2) decreased to 1.50 ± 0.05 eV (n = 1) and 1.30 ± 0.05 eV (n = 2), respectively.

Focal position control of ultrasonic transducer made of plano-concave form piezoelectric vibrator.

The use of therapeutic focused ultrasound requires control of the focal position for different treatment regions. In this study, a piezoelectric ultrasonic transducer of plano-concave form was designed, and the change of the focal position depending on the frequency of the driving signal of the fabricated transducer was experimentally investigated. PVA gel and thermochromic liquid crystal film were used to observe the thermal distribution in the focal region caused by focused ultrasound produced by the transducer. The ability to control the position of the focal region between (62 and 154) % of the geometric focal length of the transducer, depending on the input signal frequency change, was confirmed. The change of acoustic field distribution, which was calculated using the transfer function of the vibration element distributed on the surface of the transducer as the source strength, showed good agreement with the change of temperature distribution experimentally observed.

Feelings of Masculinity and Accomplishment in Response to Penetrative versus Non-Penetrative Orgasms.

Research indicates that men view their women partner's orgasms as reflections of their masculinity and sexual esteem. The purpose of this study was to examine this phenomenon in more detail by exploring whether men's feelings of masculinity and sexual esteem, as well as their feelings of accomplishment, were influenced by the method by which their woman partner experienced orgasm. Specifically, 193 young adult men (primarily between the ages of 18 and 24) read one of three vignettes (a partner orgasming from intercourse, from manual/oral stimulation, or from vibrator use) and then rated their imagined feelings of masculinity, accomplishment, and sexual esteem. Findings indicated that men who imagined their partner orgasmed from intercourse or manual/oral stimulation had higher feelings of masculinity and accomplishment than those who imagined their partner orgasmed from a vibrator. We found a significant interaction between clitoral knowledge and vignette condition in predicting masculinity, with clitoral knowledge only predicting masculinity for men in the manual/oral stimulation condition. The results of this study have important implications for sex education and the prevention of sexual problems, as well as for the future study of positive sexual functioning in women and men.

The effects of sex and handedness on masturbation laterality and other lateralized motor behaviours.

Masturbation is a common human behaviour. Compared to other unimanual behaviours it has unique properties, including increased sexual and emotional arousal, and privacy. Self-reported hand preference for masturbation was examined in 104 left-handed and 103 right-handed women, and 100 left-handed and 99 right-handed men. Handedness (modified Edinburgh Handedness Inventory, EHI), footedness, eyedness, and cheek kissing preferences were also measured. Seventy nine percent used their dominant hand (always/usually) for masturbation, but left-handers (71.5%) were less consistently lateralized to use their dominant hand than right-handers (86.5%). Hand preference for masturbation correlated more strongly with handedness (EHI), than with footedness, eyedness, or cheek preference. There was no difference in masturbation frequency between left- and right-handers, but men masturbated more frequently than women, and more women (75%) than men (33%) masturbated with sex aids. For kissing the preferred cheek of an emotionally close person from the viewer's perspective, left-handers showed a left-cheek preference, and right-handers a weaker right-cheek preference. The results suggest that hemispheric asymmetries in emotion do not influence hand preference for masturbation but may promote a leftward shift in cheek kissing. In all, masturbation is lateralized in a similar way to other manual motor behaviours in left-handed and right-handed men and women.

Comparative Evaluation of the Effectiveness of Different Pain-alleviating Methods before Local Anesthetic Administration in Children of 6 to 12 Years of Age: A Clinical Study.

BACKGROUND AND AIM OF THE STUDY: Pediatric patients are apprehensive regarding having dental treatment mainly because of painful local anesthetic (LA) injections. Various techniques like transcutaneous electrical nerve stimulation (TENS), topical anesthetic agents, and vibrator device are introduced to reduce discomfort before LA administration. Therefore, the present study aimed to compare and evaluate the effectiveness of TENS, 2% lignocaine gel, eutectic mixture of lignocaine and prilocaine (EMLA), and vibrating device before LA injections in alleviating pain in pediatric patients. MATERIALS AND METHODS: Sixty healthy children aged 6 to 12 years who required LA injections for dental procedures were selected and divided into four groups with 15 patients in each group. Wong-Baker's facial pain rating scale (WBFPRS) and face, legs, activity, cry, and consolability scale (FLACC) are used for pain perception which are tabulated, and statistically analyzed. RESULTS: The test results demonstrated that the TENS group has shown the least mean WBFPRS and FLACC score, followed by vibrator devices, EMLA gel, and lignocaine gel. CONCLUSION: The newly introduced TENS apparatus showed encouraging results, hence can be used as a safe and reliable technique to be used in pediatric dentistry. HOW TO CITE THIS ARTICLE: Patil SB, Popali DD, Bondarde PA, et al. Comparative Evaluation of the Effectiveness of Different Pain-alleviating Methods before Local Anesthetic Administration in Children of 6 to 12 Years of Age: A Clinical Study. Int J Clin Pediatr Dent 2021;14(4):447-453.

Fabrication and Characterization of a Microscale Piezoelectric Vibrator Based on Electrohydrodynamic Jet Printed PZT Thick Film.

This paper proposes a novel way of preparing a PZT thick film micro vibrator using the electrohydrodynamic jet (E-Jet) printing technique. Initially, a micro piezoelectric vibrator was simulated and designed for obtaining optimized structure, which has a total thickness of less than 600 µm. Subsequently, the PZT thick film element was directly printed on the elastic body using the E-Jet printing. This method avoids the glue fabrication process involved in the bulk piezoelectric fabrication, thus avoiding the limits of voltage drops, isolating and absorbing amplitude usually occurred in the vibrator having glue interface. It was observed that B02 and B03 modes were generated at frequencies of 29.74 and 79.14 kHz, respectively, and the amplitudes of B02 and B03 modes were 406 and 176 nm, respectively. The error between the simulation and test result in the B03 modal is only 0.35%, which indicates the accuracy of the simulation analysis and the fabrication process. The PZT thick film traveling-wave micro vibrator successfully realized bidirectional rotation of a rotor, with a maximum speed of 681 rpm, which also shows a linear relationship between excitation voltage and rotary speed. This paper provides an effective method for preparing a micro piezoelectric vibrator for MEMS ultrasonic devices, which simplifies the manufacturing process and enhances the performance of the piezoelectric vibrator.

CRISPR/Cas9 mediated somatic gene therapy for insertional mutations: the vibrator mouse model.

Somatic gene therapy remains technically challenging, especially in the central nervous system (CNS). Efficiency of gene delivery, efficacy in recipient cells, and proportion of cells required for overall benefit are the key points needed to be considered in any therapeutic approach. Recent efforts have demonstrated the efficacy of RNA-guided nucleases such as CRISPR/Cas9 in correcting point mutations or removing dominant mutations. Here we used viral delivered Cas9 plasmid and two guide RNAs to remove a recessive insertional mutation, vibrator (vb), in the mouse brain. The vb mice expressed ∼20% of normal levels of phosphatidylinositol transfer protein, α (PITPα) RNA and protein due to an endogenous retrovirus inserted in intron 4, resulting in early-onset tremor, degeneration of brainstem and spinal cord neurons, and juvenile death. The in situ CRISPR/Cas9 viral treatment effectively delayed neurodegeneration, attenuated tremor, and bypassed juvenile death. Our studies demonstrate the potential of CRISPR/Cas9-mediated gene therapy for insertional mutations in the postnatal brain.

Linear and Non-linear Dynamic Methods Toward Investigating Proprioception Impairment in Non-specific Low Back Pain Patients.

Central nervous system (CNS) uses vision, vestibular, and somatosensory information to maintain body stability. Research has shown that there is more lumbar proprioception error among low back pain (LBP) individuals as compared to healthy people. In this study, two groups of 20 healthy people and 20 non-specific low back pain (NSLBP) participants took part in this investigation. This investigation focused on somatosensory sensors and in order to alter proprioception, a vibrator (frequency of 70 Hz, amplitude of 0.5 mm) was placed on the soleus muscle area of each leg and two vibrators were placed bilaterally across the lower back muscles. Individuals, whose vision was occluded, were placed on two surfaces (foam and rigid) on force plate, and trunk angles were recorded simultaneously. Tests were performed in eight separate trials; the independent variables were vibration (four levels) and surface (two levels) for within subjects and two groups (healthy and LBP) for between subjects (4 × 2 × 2). MANOVA and multi-factor ANOVA tests were done. Linear parameters for center of pressure (COP) [deviation of amplitude, deviation of velocity, phase plane portrait (PPP), and overall mean velocity] and non-linear parameters for COP and trunk angle [recurrence quantification analysis (RQA) and Lyapunov exponents] were chosen as dependent variables. Results indicated that NSLBP individuals relied more on ankle proprioception for postural stability. Similarly, RQA parameters for the COP on both sides and for the trunk sagittal angle indicated more repeated patterns of movement among the LBP cohort. Analysis of short and long Lyapunov exponents showed that people with LBP caused no use of all joints in their bodies (non-flexible), are less stable than healthy subjects.