Green adsorbents for pharmaceutics removal from urine: Analysis of isotherms, kinetics, adsorption interactions, cost estimation, and environmental impact.

Husks of rice (RH), coffee (CH), and cholupa (CLH) were used to produce natural adsorbents. The natural adsorbents were used to remove pharmaceuticals such as diclofenac, ciprofloxacin, and acetaminophen in a mixture of distilled water. However, CH stood out for its efficiency in removing ciprofloxacin (74%) due to the higher concentration of acidic groups, as indicated by the Boehm method. In addition, CH removed 86% of ciprofloxacin individually. Therefore, CH was selected and used to remove other fluoroquinolones, such as levofloxacin and Norfloxacin. Although electrostatic interactions favored removals, better removal was observed for ciprofloxacin due to its smaller molecular volume. Then, ciprofloxacin was selected, and the effect of pH, matrix, and adsorbent doses were evaluated. In this way, using a pH of 6.2 in urine with a dose of 1.5 g L-1, it is possible to adsorb CIP concentrations in the range (0.0050-0.42 mmol L-1). Subsequently, the high R2 values and low percentages of APE and Δq indicated better fits for pseudo-second-order kinetics, suggesting a two-stage adsorption. At the same time, the Langmuir isotherm recommends a monolayer adsorption with a Qm of 25.2 mg g-1. In addition, a cost of 0.373 USD/g CIP was estimated for the process, where the material can be reused up to 4 times with a CIP removal in the urine of 51%. Consequently, thermodynamics analysis showed an exothermic and spontaneous process with high disorder. Furthermore, changes in FTIR analysis after adsorption suggest that CH in removing CIP in urine involves electrostatic attractions, hydrogen bonds and π-π interactions. In addition, the life cycle analysis presents, for the 11 categories evaluated, a lower environmental impact of the CIP removal in urine with CH than for the preparation of adsorbent, confirming that the adsorption process is more environmentally friendly than materials synthesis or other alternatives of treatments. Furthermore, future directions of the study based on real applications were proposed.

Reducing the environmental impacts of Brazilian chicken meat production using different waste recovery strategies.

Chicken meat has achieved significant index rates worldwide, with Brazil leading production and exports. The agribusiness significance has led to strengthening attention to the environmental burdens produced by the poultry industry. This research considered reducing the environmental impacts in the life cycle of Brazilian chicken meat regarding strategies for recycling waste from the production process. An attributional cradle-to-gate life cycle assessment was performed, with the functional unit of 1 kg of slaughtered and unpacked chicken meat. The two suggested scenarios used: i) chicken bedding for biogas production and ii) chicken carcass waste as meat meals in feed production. Handling poultry litter for biogas production avoided methane and ammonia emissions, reducing over 50% of the environmental indicators of Climate Change, Terrestrial Acidification, and Freshwater Eutrophication. Reuse poultry waste to produce meat meals reduced from 12% to 55% in all impact categories, decreasing emissions from carcasses destined for decomposition in landfills and using less raw materials from bovine sources. Investigating the environmental performance of the chicken meat production chain encouraged the circularity of natural resources and waste recovery strategies in the system boundary, thus helping to accomplish Sustainable Development Goals 7, 9, 12, and 13 of the UN Agenda 2030.

Recovery of Mixtures of Construction Waste, PET and Sugarcane Bagasse for the Manufacture of Partition Blocks.

The building industry generates millions of tons of construction and demolition waste annually (12 million tons/year are generated in Mexico, of which only 4% is reused or recycled). Concomitantly, the demand for goods and services by the building industry causes significant environmental impacts. On the other hand, plastic waste is also difficult to assimilate into the environment in the short term, and its recovery is of special interest. Therefore, this research focuses on the feasibility of the manufacture of Partition Blocks (essential building element) through the combination of construction and demolition waste (CDW), polyethylene terephthalate (PET) plastic flakes, dust from tire shredding, and residue from the sugar industry (bagasse). The results of this study show that the Partition Blocks made with CDW and PET reach an average compressive strength of 115.003 kgf/cm2 (11.278 MPa) (suitable for structural use according to Mexican regulations); the use of lime enhances the consistency of the mixture of CDW and PET (increases its cohesion and homogeneity); and finally, these Partition Blocks have a cost comparable to the current conventional Partition Blocks made with virgin material, thus, conferring them validity as a feasible recycling option for these residues.

Plastic recycling and their use as raw material for the synthesis of carbonaceous materials.

Pollution by polymeric materials - in particular plastics - has a negative effect on the health of our planet. Approximately 4.9 billion tons of plastic are estimated to have been improperly disposed of, with the environment as their final destination. This scenario comes from a linear economic system, extraction-production-consumption and finally disposal. The alarming panorama has created the need to find technological solutions that generate new uses for discarded polymeric materials or turn them into part of the production process to produce new and novel materials, such as carbon nanotubes, graphene, or other carbonaceous materials of high added value, modifying the economy for a circular and sustainable production model. This review highlights the negative impact that the disposal of plastic materials has on the environment and the research needs that allow solving the pollution problems generated in the environment by these wastes. Also, the review highlights the current and future directions of recovery plastic waste research-based to promote innovations in the plastic production sector that could allow obtaining breakpoints in other industrial sectors with the technology-based companies.

Carangoides bartholomaei (Cuvier, 1833) stomach: a source of aspartic proteases for industrial and biotechnological applications / Estômago de Carangoides bartholomaei (Cuvier, 1833): uma fonte de proteases aspárticas para aplicações industriais e biotecnológicas

The viscera and other residues from fish processing are commonly discarded by the fishing industry. These by products can be a source of digestive enzymes with industrial and biotechnological potential. In this study, we aimed at the extraction, characterization, and application of acidic proteases from the stomach of Carangoides bartholomaei (Cuvier, 1833). A crude extract from the stomachs was obtained and submitted to a partial purification process by salting-out, which obtained a Purified Extract (PE) with a specific proteolytic activity of 54.0 U·mg-¹. A purification of 1.9 fold and a yield of 41% were obtained. The PE presents two isoforms of acidic proteases and a maximum proteolytic activity at 45 °C and pH 2.0. The PE acidic proteolytic activity was stable in the pH range of 1.5 to 7.0 and temperature from 25 °C to 50 °C. Purified Extract kept 35% of its proteolytic activity at the presence of NaCl 15% (m/v) but was totally inhibited by pepstatin A. Purified Extract aspartic proteases presented high activity in the presence of heavy metals such as Cd2+, Hg2+, Pb2+, Al3+, and Cu2+. The utilization of PE as an enzymatic addictive in the collagen extraction from Nile tilapia scales has doubled the process yield. The results indicate the potential of these aspartic proteases for industrial and biotechnological applications.(AU)

As vísceras e outros resíduos do processamento de peixes são geralmente descartados pela indústria pesqueira. Esses resíduos podem ser uma fonte de enzimas digestivas com potencial industrial e biotecnológico. Neste estudo, objetivamos a extração, caracterização e aplicação de proteases aspárticas do estômago de Carangoides bartholomaei (Cuvier, 1833). Um extrato bruto do estômago foi obtido e submetido a um processo de purificação parcial, que obteve um Extrato Purificado (EP) com uma atividade proteolítica específica de 54,0 U·mg-¹. Foi obtida uma purificação de 1,9 vezes e um rendimento de 41%. O EP apresenta duas isoformas de proteases ácidas e atividade proteolítica máxima a 45 °C e pH 2,0. A atividade proteolítica do EP foi estável na faixa de pH de 1,5 a 7,0 e temperatura de 25 °C a 50 °C. O EP manteve 35% de sua atividade proteolítica na presença de NaCl a 15% (m/v), mas foi totalmente inibida pela pepstatina A. As proteases ácidas do EP apresentaram alta atividade na presença de metais pesados como o Cd2+, Hg2+, Pb2+, Al3+ e Cu2+. A utilização de EP como aditivo enzimático na extração de colágeno a partir de escamas de tilápia do Nilo dobrou o rendimento do processo. Os resultados indicam um potencial dessas proteases para aplicações industriais e biotecnológicas.(AU)

Obtainment and characterization of digestive aspartic proteases from the fish Caranx hippos (Linnaeus, 1766) / Obtenção e caracterização de proteases aspárticas digestórias do peixe Caranx hippos (Linnaeus, 1766)

This work aimed to obtain aspartic proteases of industrial and biotechnological interest from the stomach of the crevalle jack fish (Caranx hippos). In order to do so, a crude extract (CE) of the stomach was obtained and subjected to a partial purification by salting-out, which resulted in the enzyme extract (EE) obtainment. EE proteases were characterized physicochemically and by means of zymogram. In addition, the effect of chemical agents on their activity was also assessed. By means of salting-out it was possible to obtain a purification of 1.6 times with a yield of 49.4%. Two acid proteases present in the EE were observed in zymogram. The optimum temperature and thermal stability for EE acidic proteases were 55 ºC and 45 °C, respectively. The optimum pH and pH stability found for these enzymes were pH 1.5 and 7.0, respectively. Total inhibition of EE acid proteolytic activity was observed in the presence of pepstatin A. dithiothreitol (DTT) and Ca2+ did not promote a significant effect on enzyme activity. In the presence of heavy metals, such as Al3+, Cd2+ and Hg2+, EE acidic proteases showed more than 70% of their enzymatic activity. The results show that it is possible to obtain, from the stomach of C. hippos, aspartic proteases with high proteolytic activity and characteristics that demonstrate potential for industrial and biotechnological applications.(AU)

Este trabalho objetivou obter proteases aspárticas de interesse industrial e biotecnológico a partir do estômago do peixe xaréu (Caranx hippos). Para isso, foi obtido um extrato bruto do estômago, o qual foi submetido a uma purificação parcial por salting-out onde se obteve o extrato enzimático (EE). As proteases do EE foram caracterizadas físico-quimicamente e através de zimograma. Além disso, o efeito de agentes químicos sobre sua atividade também foi avaliado. Através de salting-out foi possível obter uma purificação de 1,6 vezes com rendimento de 49,4%. Foram observadas duas proteases ácidas presentes no EE através de zimograma. A temperatura ótima e a estabilidade térmica para as proteases ácidas do EE foram de 55 ºC e 45 °C, respectivamente. O pH ótimo e a estabilidade ao pH encontrados para estas enzimas foram o pH 1,5 e 7,0, respectivamente. Observou-se a inibição total da atividade proteolítica ácida do EE na presença de pepstatina A. O ditiotreitol (DTT) e o Ca2+ não promoveram efeito significativo na atividade enzimática. Na presença de metais pesados, como Al3+, Cd2+ e Hg2+, o EE manteve mais de 70% de atividade enzimática do EE. Os resultados mostram que é possível obter, a partir do estômago de C. hippos, proteases aspárticas com alta atividade proteolítica e características que demonstram potencial para aplicações industriais e biotecnológicas.(AU)

Carangoides bartholomaei (Cuvier, 1833) stomach: a source of aspartic proteases for industrial and biotechnological applications / Estômago de Carangoides bartholomaei (Cuvier, 1833): uma fonte de proteases aspárticas para aplicações industriais e biotecnológicas

The viscera and other residues from fish processing are commonly discarded by the fishing industry. These byproducts can be a source of digestive enzymes with industrial and biotechnological potential. In this study, we aimed at the extraction, characterization, and application of acidic proteases from the stomach of Carangoides bartholomaei (Cuvier, 1833). A crude extract from the stomachs was obtained and submitted to a partial purification process by salting-out, which obtained a Purified Extract (PE) with a specific proteolytic activity of 54.0 U·mg-1. A purification of 1.9 fold and a yield of 41% were obtained. The PE presents two isoforms of acidic proteases and a maximum proteolytic activity at 45 °C and pH 2.0. The PE acidic proteolytic activity was stable in the pH range of 1.5 to 7.0 and temperature from 25 °C to 50 °C. Purified Extract kept 35% of its proteolytic activity at the presence of NaCl 15% (m/v) but was totally inhibited by pepstatin A. Purified Extract aspartic proteases presented high activity in the presence of heavy metals such as Cd2+, Hg2+, Pb2+, Al3+, and Cu2+. The utilization of PE as an enzymatic addictive in the collagen extraction from Nile tilapia scales has doubled the process yield. The results indicate the potential of these aspartic proteases for industrial and biotechnological applications.

As vísceras e outros resíduos do processamento de peixes são geralmente descartados pela indústria pesqueira. Esses resíduos podem ser uma fonte de enzimas digestivas com potencial industrial e biotecnológico. Neste estudo, objetivamos a extração, caracterização e aplicação de proteases aspárticas do estômago de Carangoides bartholomaei (Cuvier, 1833). Um extrato bruto do estômago foi obtido e submetido a um processo de purificação parcial, que obteve um Extrato Purificado (EP) com uma atividade proteolítica específica de 54,0 U·mg-1. Foi obtida uma purificação de 1,9 vezes e um rendimento de 41%. O EP apresenta duas isoformas de proteases ácidas e atividade proteolítica máxima a 45 °C e pH 2,0. A atividade proteolítica do EP foi estável na faixa de pH de 1,5 a 7,0 e temperatura de 25 °C a 50 °C. O EP manteve 35% de sua atividade proteolítica na presença de NaCl a 15% (m/v), mas foi totalmente inibida pela pepstatina A. As proteases ácidas do EP apresentaram alta atividade na presença de metais pesados como o Cd2+, Hg2+, Pb2+, Al3+ e Cu2+. A utilização de EP como aditivo enzimático na extração de colágeno a partir de escamas de tilápia do Nilo dobrou o rendimento do processo. Os resultados indicam um potencial dessas proteases para aplicações industriais e biotecnológicas.

Obtainment and characterization of digestive aspartic proteases from the fish Caranx hippos (Linnaeus, 1766) / Obtenção e caracterização de proteases aspárticas digestórias do peixe Caranx hippos (Linnaeus, 1766)

This work aimed to obtain aspartic proteases of industrial and biotechnological interest from the stomach of the crevalle jack fish (Caranx hippos). In order to do so, a crude extract (CE) of the stomach was obtained and subjected to a partial purification by salting-out, which resulted in the enzyme extract (EE) obtainment. EE proteases were characterized physicochemically and by means of zymogram. In addition, the effect of chemical agents on their activity was also assessed. By means of salting-out it was possible to obtain a purification of 1.6 times with a yield of 49.4%. Two acid proteases present in the EE were observed in zymogram. The optimum temperature and thermal stability for EE acidic proteases were 55 ºC and 45 °C, respectively. The optimum pH and pH stability found for these enzymes were pH 1.5 and 7.0, respectively. Total inhibition of EE acid proteolytic activity was observed in the presence of pepstatin A. dithiothreitol (DTT) and Ca2+ did not promote a significant effect on enzyme activity. In the presence of heavy metals, such as Al3+, Cd2+ and Hg2+, EE acidic proteases showed more than 70% of their enzymatic activity. The results show that it is possible to obtain, from the stomach of C. hippos, aspartic proteases with high proteolytic activity and characteristics that demonstrate potential for industrial and biotechnological applications.

Este trabalho objetivou obter proteases aspárticas de interesse industrial e biotecnológico a partir do estômago do peixe xaréu (Caranx hippos). Para isso, foi obtido um extrato bruto do estômago, o qual foi submetido a uma purificação parcial por salting-out onde se obteve o extrato enzimático (EE). As proteases do EE foram caracterizadas físico-quimicamente e através de zimograma. Além disso, o efeito de agentes químicos sobre sua atividade também foi avaliado. Através de salting-out foi possível obter uma purificação de 1,6 vezes com rendimento de 49,4%. Foram observadas duas proteases ácidas presentes no EE através de zimograma. A temperatura ótima e a estabilidade térmica para as proteases ácidas do EE foram de 55 ºC e 45 °C, respectivamente. O pH ótimo e a estabilidade ao pH encontrados para estas enzimas foram o pH 1,5 e 7,0, respectivamente. Observou-se a inibição total da atividade proteolítica ácida do EE na presença de pepstatina A. O ditiotreitol (DTT) e o Ca2+ não promoveram efeito significativo na atividade enzimática. Na presença de metais pesados, como Al3+, Cd2+ e Hg2+, o EE manteve mais de 70% de atividade enzimática do EE. Os resultados mostram que é possível obter, a partir do estômago de C. hippos, proteases aspárticas com alta atividade proteolítica e características que demonstram potencial para aplicações industriais e biotecnológicas.

Obtainment and characterization of digestive aspartic proteases from the fish Caranx hippos (Linnaeus, 1766) / Obtenção e caracterização de proteases aspárticas digestórias do peixe Caranx hippos (Linnaeus, 1766)

This work aimed to obtain aspartic proteases of industrial and biotechnological interest from the stomach of the crevalle jack fish (Caranx hippos). In order to do so, a crude extract (CE) of the stomach was obtained and subjected to a partial purification by salting-out, which resulted in the enzyme extract (EE) obtainment. EE proteases were characterized physicochemically and by means of zymogram. In addition, the effect of chemical agents on their activity was also assessed. By means of salting-out it was possible to obtain a purification of 1.6 times with a yield of 49.4%. Two acid proteases present in the EE were observed in zymogram. The optimum temperature and thermal stability for EE acidic proteases were 55 ºC and 45 °C, respectively. The optimum pH and pH stability found for these enzymes were pH 1.5 and 7.0, respectively. Total inhibition of EE acid proteolytic activity was observed in the presence of pepstatin A. dithiothreitol (DTT) and Ca2+ did not promote a significant effect on enzyme activity. In the presence of heavy metals, such as Al3+, Cd2+ and Hg2+, EE acidic proteases showed more than 70% of their enzymatic activity. The results show that it is possible to obtain, from the stomach of C. hippos, aspartic proteases with high proteolytic activity and characteristics that demonstrate potential for industrial and biotechnological applications.

Este trabalho objetivou obter proteases aspárticas de interesse industrial e biotecnológico a partir do estômago do peixe xaréu (Caranx hippos). Para isso, foi obtido um extrato bruto do estômago, o qual foi submetido a uma purificação parcial por salting-out onde se obteve o extrato enzimático (EE). As proteases do EE foram caracterizadas físico-quimicamente e através de zimograma. Além disso, o efeito de agentes químicos sobre sua atividade também foi avaliado. Através de salting-out foi possível obter uma purificação de 1,6 vezes com rendimento de 49,4%. Foram observadas duas proteases ácidas presentes no EE através de zimograma. A temperatura ótima e a estabilidade térmica para as proteases ácidas do EE foram de 55 ºC e 45 °C, respectivamente. O pH ótimo e a estabilidade ao pH encontrados para estas enzimas foram o pH 1,5 e 7,0, respectivamente. Observou-se a inibição total da atividade proteolítica ácida do EE na presença de pepstatina A. O ditiotreitol (DTT) e o Ca2+ não promoveram efeito significativo na atividade enzimática. Na presença de metais pesados, como Al3+, Cd2+ e Hg2+, o EE manteve mais de 70% de atividade enzimática do EE. Os resultados mostram que é possível obter, a partir do estômago de C. hippos, proteases aspárticas com alta atividade proteolítica e características que demonstram potencial para aplicações industriais e biotecnológicas.

Carangoides bartholomaei (Cuvier, 1833) stomach: a source of aspartic proteases for industrial and biotechnological applications / Estômago de Carangoides bartholomaei (Cuvier, 1833): uma fonte de proteases aspárticas para aplicações industriais e biotecnológicas

The viscera and other residues from fish processing are commonly discarded by the fishing industry. These by products can be a source of digestive enzymes with industrial and biotechnological potential. In this study, we aimed at the extraction, characterization, and application of acidic proteases from the stomach of Carangoides bartholomaei (Cuvier, 1833). A crude extract from the stomachs was obtained and submitted to a partial purification process by salting-out, which obtained a Purified Extract (PE) with a specific proteolytic activity of 54.0 U·mg-¹. A purification of 1.9 fold and a yield of 41% were obtained. The PE presents two isoforms of acidic proteases and a maximum proteolytic activity at 45 °C and pH 2.0. The PE acidic proteolytic activity was stable in the pH range of 1.5 to 7.0 and temperature from 25 °C to 50 °C. Purified Extract kept 35% of its proteolytic activity at the presence of NaCl 15% (m/v) but was totally inhibited by pepstatin A. Purified Extract aspartic proteases presented high activity in the presence of heavy metals such as Cd2+, Hg2+, Pb2+, Al3+, and Cu2+. The utilization of PE as an enzymatic addictive in the collagen extraction from Nile tilapia scales has doubled the process yield. The results indicate the potential of these aspartic proteases for industrial and biotechnological applications.

As vísceras e outros resíduos do processamento de peixes são geralmente descartados pela indústria pesqueira. Esses resíduos podem ser uma fonte de enzimas digestivas com potencial industrial e biotecnológico. Neste estudo, objetivamos a extração, caracterização e aplicação de proteases aspárticas do estômago de Carangoides bartholomaei (Cuvier, 1833). Um extrato bruto do estômago foi obtido e submetido a um processo de purificação parcial, que obteve um Extrato Purificado (EP) com uma atividade proteolítica específica de 54,0 U·mg-¹. Foi obtida uma purificação de 1,9 vezes e um rendimento de 41%. O EP apresenta duas isoformas de proteases ácidas e atividade proteolítica máxima a 45 °C e pH 2,0. A atividade proteolítica do EP foi estável na faixa de pH de 1,5 a 7,0 e temperatura de 25 °C a 50 °C. O EP manteve 35% de sua atividade proteolítica na presença de NaCl a 15% (m/v), mas foi totalmente inibida pela pepstatina A. As proteases ácidas do EP apresentaram alta atividade na presença de metais pesados como o Cd2+, Hg2+, Pb2+, Al3+ e Cu2+. A utilização de EP como aditivo enzimático na extração de colágeno a partir de escamas de tilápia do Nilo dobrou o rendimento do processo. Os resultados indicam um potencial dessas proteases para aplicações industriais e biotecnológicas.

Obtainment and characterization of digestive aspartic proteases from the fish Caranx hippos (Linnaeus, 1766)

Abstract This work aimed to obtain aspartic proteases of industrial and biotechnological interest from the stomach of the crevalle jack fish (Caranx hippos). In order to do so, a crude extract (CE) of the stomach was obtained and subjected to a partial purification by salting-out, which resulted in the enzyme extract (EE) obtainment. EE proteases were characterized physicochemically and by means of zymogram. In addition, the effect of chemical agents on their activity was also assessed. By means of salting-out it was possible to obtain a purification of 1.6 times with a yield of 49.4%. Two acid proteases present in the EE were observed in zymogram. The optimum temperature and thermal stability for EE acidic proteases were 55 ºC and 45 °C, respectively. The optimum pH and pH stability found for these enzymes were pH 1.5 and 7.0, respectively. Total inhibition of EE acid proteolytic activity was observed in the presence of pepstatin A. dithiothreitol (DTT) and Ca2+ did not promote a significant effect on enzyme activity. In the presence of heavy metals, such as Al3+, Cd2+ and Hg2+, EE acidic proteases showed more than 70% of their enzymatic activity. The results show that it is possible to obtain, from the stomach of C. hippos, aspartic proteases with high proteolytic activity and characteristics that demonstrate potential for industrial and biotechnological applications.

Resumo Este trabalho objetivou obter proteases aspárticas de interesse industrial e biotecnológico a partir do estômago do peixe xaréu (Caranx hippos). Para isso, foi obtido um extrato bruto do estômago, o qual foi submetido a uma purificação parcial por salting-out onde se obteve o extrato enzimático (EE). As proteases do EE foram caracterizadas físico-quimicamente e através de zimograma. Além disso, o efeito de agentes químicos sobre sua atividade também foi avaliado. Através de salting-out foi possível obter uma purificação de 1,6 vezes com rendimento de 49,4%. Foram observadas duas proteases ácidas presentes no EE através de zimograma. A temperatura ótima e a estabilidade térmica para as proteases ácidas do EE foram de 55 ºC e 45 °C, respectivamente. O pH ótimo e a estabilidade ao pH encontrados para estas enzimas foram o pH 1,5 e 7,0, respectivamente. Observou-se a inibição total da atividade proteolítica ácida do EE na presença de pepstatina A. O ditiotreitol (DTT) e o Ca2+ não promoveram efeito significativo na atividade enzimática. Na presença de metais pesados, como Al3+, Cd2+ e Hg2+, o EE manteve mais de 70% de atividade enzimática do EE. Os resultados mostram que é possível obter, a partir do estômago de C. hippos, proteases aspárticas com alta atividade proteolítica e características que demonstram potencial para aplicações industriais e biotecnológicas.

Carangoides bartholomaei (Cuvier, 1833) stomach: a source of aspartic proteases for industrial and biotechnological applications

Abstract The viscera and other residues from fish processing are commonly discarded by the fishing industry. These by-products can be a source of digestive enzymes with industrial and biotechnological potential. In this study, we aimed at the extraction, characterization, and application of acidic proteases from the stomach of Carangoides bartholomaei (Cuvier, 1833). A crude extract from the stomachs was obtained and submitted to a partial purification process by salting-out, which obtained a Purified Extract (PE) with a specific proteolytic activity of 54.0 Umg-1. A purification of 1.9 fold and a yield of 41% were obtained. The PE presents two isoforms of acidic proteases and a maximum proteolytic activity at 45 °C and pH 2.0. The PE acidic proteolytic activity was stable in the pH range of 1.5 to 7.0 and temperature from 25 °C to 50 °C. Purified Extract kept 35% of its proteolytic activity at the presence of NaCl 15% (m/v) but was totally inhibited by pepstatin A. Purified Extract aspartic proteases presented high activity in the presence of heavy metals such as Cd2+, Hg2+, Pb2+, Al3+, and Cu2+. The utilization of PE as an enzymatic addictive in the collagen extraction from Nile tilapia scales has doubled the process yield. The results indicate the potential of these aspartic proteases for industrial and biotechnological applications.

Resumo As vísceras e outros resíduos do processamento de peixes são geralmente descartados pela indústria pesqueira. Esses resíduos podem ser uma fonte de enzimas digestivas com potencial industrial e biotecnológico. Neste estudo, objetivamos a extração, caracterização e aplicação de proteases aspárticas do estômago de Carangoides bartholomaei (Cuvier, 1833). Um extrato bruto do estômago foi obtido e submetido a um processo de purificação parcial, que obteve um Extrato Purificado (EP) com uma atividade proteolítica específica de 54,0 Umg-1. Foi obtida uma purificação de 1,9 vezes e um rendimento de 41%. O EP apresenta duas isoformas de proteases ácidas e atividade proteolítica máxima a 45 °C e pH 2,0. A atividade proteolítica do EP foi estável na faixa de pH de 1,5 a 7,0 e temperatura de 25 °C a 50 °C. O EP manteve 35% de sua atividade proteolítica na presença de NaCl a 15% (m/v), mas foi totalmente inibida pela pepstatina A. As proteases ácidas do EP apresentaram alta atividade na presença de metais pesados como o Cd2+, Hg2+, Pb2+, Al3+ e Cu2+. A utilização de EP como aditivo enzimático na extração de colágeno a partir de escamas de tilápia do Nilo dobrou o rendimento do processo. Os resultados indicam um potencial dessas proteases para aplicações industriais e biotecnológicas

Achieving waste recovery goals in the medium/long term: Eco-efficiency analysis in a Brazilian city by using the LCA approach.

The aim of this study was to analyse how to ensure that medium- and long-term waste recovery goals can be achieved in Brazilian cities, based on the incorporation of viable and accessible technology. The identification of the strengths of the Brazilian cities with better (dry and wet) waste recovery rates allowed different strategies to be proposed for João Pessoa (the city selected as a case study). Those strategies were based on the improvement of (1) the selective collection of the recyclable dry waste fraction, (2) the material recovery facility to increase the recovery of recyclable dry waste fraction to be recycled and/or wet waste fraction to be composted, and finally (3) the working conditions of waste workers. A combination of these improvement strategies at two different levels of implementation (partial and total) allowed the definition of 14 alternative scenarios, which were analysed from an eco-efficiency perspective (environmental vs. economic). After analysing the evolution over time of the alternative scenarios proposed, the proposal that was finally selected was based on the initial implementation of a mechanical biological and composting facility capable of handling up to 50% of the mixed municipal solid waste collected by 2023 with a material recovery efficiency of 30%. From there, the efficiency of the mechanical biological and composting facility should increase up to 60% to achieve the waste recovery goals by 2034 (management of 60% of the mixed waste collected). This rate has not yet been reached in any of the Brazilian mechanical biological and composting facilities analysed, so the reduction in the amount of waste generated and the increase in the selective separation of waste at source are identified as key elements to be able to fulfil the long-term goals. The approach used in the case study provides guidelines for application in other geographical contexts.

Vermicomposting process for treating animal slurry in Latin American rural areas.

The management of animal slurry is a big issue in low-income rural areas worldwide. Bolivia suffers this issue related to collection, treatment and final disposal since the main solution applied is the open dumping. The aim of this study is to introduce a feasible treatment of animal slurry in the rural area of Carmen Pampa, where about 670 kg of dung are produced per day and disposed of in open areas. The objective is the improvement of the environmental sustainability and human health, providing an alternative solution for encouraging the circular economy. The study is focused on the vermicomposting process, a sustainable solution for low-income regions. The analysis was conducted in function of the earthworm breeds used locally ( Eisenia fetida and Lumbricus terrestris) and the application of activated bacteria (AB) for improving the process. The mass loss, the treatment time, and the growing rate of the earthworms were analyzed. The results suggest that the different breed of the worms allows gaining up to 19 days, while the use of the AB allows saving about 30 days. Moreover, the vermicomposting process reduced the mass of the slurry of about 65% for the swine's dung and the bovine's dung, and 90% of the hens' dung. Finally, experimental evidence shows that the growing rate of the E. fetida is higher than the L. terrestris (F[1,8] = 78, p < 0.05), with an average of about 193%. The data obtained could be of interest for other stakeholders who live in similar environmental, climatic, and economic conditions for improving sustainability.

Staphylococcus xylosus fermentation of pork fatty waste: raw material for biodiesel production

ABSTRACT The need for cleaner sources of energy has stirred research into utilising alternate fuel sources with favourable emission and sustainability such as biodiesel. However, there are technical constraints that hinder the widespread use of some of the low cost raw materials such as pork fatty wastes. Currently available technology permits the use of lipolytic microorganisms to sustainably produce energy from fat sources; and several microorganisms and their metabolites are being investigated as potential energy sources. Thus, the aim of this study was to characterise the process of Staphylococcus xylosus mediated fermentation of pork fatty waste. We also wanted to explore the possibility of fermentation effecting a modification in the lipid carbon chain to reduce its melting point and thereby act directly on one of the main technical barriers to obtaining biodiesel from this abundant source of lipids. Pork fatty waste was obtained from slaughterhouses in southern Brazil during evisceration of the carcasses and the kidney casing of slaughtered animals was used as feedstock. Fermentation was performed in BHI broth with different concentrations of fatty waste and for different time periods which enabled evaluation of the effect of fermentation time on the melting point of swine fat. The lowest melting point was observed around 46 °C, indicating that these chemical and biological reactions can occur under milder conditions, and that such pre-treatment may further facilitate production of biodiesel from fatty animal waste.

Staphylococcus xylosus fermentation of pork fatty waste: raw material for biodiesel production

The need for cleaner sources of energy has stirred research into utilising alternate fuel sources with favourable emission and sustainability such as biodiesel. However, there are technical constraints that hinder the widespread use of some of the low cost raw materials such as pork fatty wastes. Currently available technology permits the use of lipolytic microorganisms to sustainably produce energy from fat sources; and several microorganisms and their metabolites are being investigated as potential energy sources. Thus, the aim of this study was to characterise the process of Staphylococcus xylosus mediated fermentation of pork fatty waste. We also wanted to explore the possibility of fermentation effecting a modification in the lipid carbon chain to reduce its melting point and thereby act directly on one of the main technical barriers to obtaining biodiesel from this abundant source of lipids. Pork fatty waste was obtained from slaughterhouses in southern Brazil during evisceration of the carcasses and the kidney casing of slaughtered animals was used as feedstock. Fermentation was performed in BHI broth with different concentrations of fatty waste and for different time periods which enabled evaluation of the effect of fermentation time on the melting point of swine fat. The lowest melting point was observed around 46 °C, indicating that these chemical and biological reactions can occur under milder conditions, and that such pre-treatment may further facilitate production of biodiesel from fatty animal waste.(AU)

Staphylococcus xylosus fermentation of pork fatty waste: raw material for biodiesel production.

The need for cleaner sources of energy has stirred research into utilising alternate fuel sources with favourable emission and sustainability such as biodiesel. However, there are technical constraints that hinder the widespread use of some of the low cost raw materials such as pork fatty wastes. Currently available technology permits the use of lipolytic microorganisms to sustainably produce energy from fat sources; and several microorganisms and their metabolites are being investigated as potential energy sources. Thus, the aim of this study was to characterise the process of Staphylococcus xylosus mediated fermentation of pork fatty waste. We also wanted to explore the possibility of fermentation effecting a modification in the lipid carbon chain to reduce its melting point and thereby act directly on one of the main technical barriers to obtaining biodiesel from this abundant source of lipids. Pork fatty waste was obtained from slaughterhouses in southern Brazil during evisceration of the carcasses and the kidney casing of slaughtered animals was used as feedstock. Fermentation was performed in BHI broth with different concentrations of fatty waste and for different time periods which enabled evaluation of the effect of fermentation time on the melting point of swine fat. The lowest melting point was observed around 46°C, indicating that these chemical and biological reactions can occur under milder conditions, and that such pre-treatment may further facilitate production of biodiesel from fatty animal waste.

Produtos de panificação elaborados com bagaço cervejeiro

A introdução do bagaço cervejeiro na alimentação humana, como alternativa de reutilizá-lo, é também uma opção de enriquecimento da alimentação, visto que este carrega consigo uma rica quantidade de nutrientes. O objetivo deste trabalho foi avaliar a aceitação e a intenção de compra de pão e biscoito elaborados com farinha do bagaço cervejeiro. Para isso, o bagaço foi desidratado e moído para obtenção da farinha e adicionado em 20% da quantidade de farinha de trigo para elaboração dos produtos. Após realizou-se análise sensorial com 56 provadores não treinados com auxílio de escala hedônica de nove pontos para análise de aparência, odor, textura e sabor. Com os resultados calcularam-se as médias e os índices de aceitabilidade. Os produtos elaborados obtiveram ótima aceitação pelos provadores, onde o sabor apresentou maior índice de aceitação em ambos os produtos. Em relação à intenção de compra, o pão despertou maior interesse, já que a maioria compraria com certeza. Percebeu-se que os produtos podem obter sucesso de compra se produzidos e lançados ao mercado, pois os resultados foram sensorialmente satisfatórios, segundo as médias e o índice de aceitação.(AU)

The introduction of the beer residue in food as an alternative to reuse it, it is also an option for enrichment of food, since it carries with it a rich nutrients. The objective of this study was to evaluate acceptance and purchase intention of bread and cookies made with cake flour brewer. For this, the residue was dried and milled to obtain flour and added in 20% of the amount of wheat flour for preparation of products. After sensory analysis was carried out with 56 untrained tasters they were, the Franciscan University Center academic and general population with the help of nine-point hedonic scale for analysis of the appearance, smell, texture and flavor. The results were calculated and the mean rate of acceptability. Products manufactured by the tasters had great acceptance, where the flavor had a higher rate in both products. For purchase intent, bread attracted significant interest, since most buy for sure. It was noticed that the products can be successful purchase is produced and released to the market, because the sensory results were satisfactory, and the second the average acceptance rate.(AU)

Produtos de panificação elaborados com bagaço cervejeiro / Baked goods made from brewers' bagasse

A introdução do bagaço cervejeiro na alimentação humana, como alternativa de reutilizá-lo, é também uma opção de enriquecimento da alimentação, visto que este carrega consigo uma rica quantidade de nutrientes. O objetivo deste trabalho foi avaliar a aceitação e a intenção de compra de pão e biscoito elaborados com farinha do bagaço cervejeiro. Para isso, o bagaço foi desidratado e moído para obtenção da farinha e adicionado em 20% da quantidade de farinha de trigo para elaboração dos produtos. Após realizou-se análise sensorial com 56 provadores não treinados com auxílio de escala hedônica de nove pontos para análise de aparência, odor, textura e sabor. Com os resultados calcularam-se as médias e os índices de aceitabilidade. Os produtos elaborados obtiveram ótima aceitação pelos provadores, onde o sabor apresentou maior índice de aceitação em ambos os produtos. Em relação à intenção de compra, o pão despertou maior interesse, já que a maioria compraria com certeza. Percebeu-se que os produtos podem obter sucesso de compra se produzidos e lançados ao mercado, pois os resultados foram sensorialmente satisfatórios, segundo as médias e o índice de aceitação.