Laser-assisted Root Canal Filling Removal of Lower Incisors - A Micro-CT Study.

Aim: To compare the efficiency of root canal filling removal from oval-shaped root canals with high-energy Er:YAG laser and additional instrumentation with a rotary Ni-Ti XP-Endo Finisher R system. Materials and Methods: The in vitro study was accomplished on 12 freshly extracted single-rooted mandibular incisors with one straight oval-shaped root canal, shaped with XP-Endo Shaper 30/.04 and obturated by using the warm vertical condensation technique subjected to further endodontic orthograde retreatment. Group 1: the first retreatment was carried out using a high-energy Er:YAG laser (n = 12). Group 2: the additional retreatment of the same specimens was performed with the XP-Endo Finisher-R system (n = 12). The effectiveness of the retreatment techniques was evaluated by a threefold micro-CT examination. The amount of the remaining root canal filling material was analyzed by Mann-Whitney U test and Friedman tests. Results: A significant decrease in the quantity of the root canal filling was found following the first and after the second retreatment, compared to the initial values in all examined sections (P < 0.001). Within groups, additional application of the Ni-Ti system resulted in no significant removal of the filling materials (P > 0.05). Conclusions: None of the systems resulted in complete root canal filling removal. Despite the improved results after the application of the supplementary retreatment protocol, none of the root canal walls were completely clean in the apical area. The high-energy Er:YAG laser and XP-Endo Finisher R rotary system can be successfully used in endodontic orthograde retreatment under relevant operating parameters.

Comparative Evaluation of Different Methods of Activation of Chelating Solution for Smear Layer Removal in the Apical Portion of the Root Canal Using a Scanning Electron Microscopy: An In Vitro Study.

Background The smear layer has an adverse effect on the sealing of root canals during obturation, and it is the main reason for the failure of root canal treatment. Root canal irrigation using a conventional irrigation system is ineffective for smear layer removal, especially from the apical third region, where most lateral canals are present. For successful endodontic treatment, the smear layer should be removed from the apical third region using an effective irrigation activation system. Aim This study aimed to compare smear layer removal by conventional irrigation, XP Endo Finisher (XPF), endoactivator (EA), passive ultrasonic activation, and root canal brush using 17% ethylenediaminetetraacetic acid (EDTA) as a chelating solution and 5.25% sodium hypochlorite after chemomechanical preparation, using scanning electron microscopy (SEM). Method A total of 50 extracted human mandibular single canal premolars with mature roots were selected for this study. Samples were decoronated to obtain a standard working length (WL) of 15 mm. Canal patency was achieved using a 10 k file. Samples were sealed with sticky wax to obtain the vapor lock effect. Biomechanical preparation is done till F3. The samples were divided into five groups according to the final irrigation activation protocol: Group 1, control group; group 2, XPF; group 3, EA; group 4, passive ultrasonic irrigation (PUI); and group 5,, root canal brush. Samples were divided into two equal halves longitudinally. Each sample was analyzed for a smear layer under SEM at 2000x magnification. Statistical analysis was done using the one-way Anova "F" test and Tukey's post-hoc test. Results Group 3 showed the least presence of a smear layer, followed by groups 4, 2, 5, and 1. All the groups exhibited highly significant differences between each other (p < 0.001). Group B shows no significant difference with groups C, D, and E. Group C shows no significant difference with groups D and E. Group D shows no significant difference with group E. Conclusion The EA removes the smear layer effectively as compared with other groups. All the irrigation activation system shows the presence of smear layer. No activation systems were able to remove the smear layer completely.

XP-Endo Finisher behaviour and irrigant temperature in intracanal environment: Clinical measurements.

AIM: To evaluate the behaviour of the XP-Endo Finisher and the variation in the intracanal temperature of the irrigant at rest and when activated over time. METHODOLOGY: Differential scanning calorimetry (DSC) determined the transformation temperatures of XP-Endo Finisher instruments. A digital thermocouple was used to measure the temperature of the irrigant inside the pulp chamber. Two measurements were performed for each tooth (n = 12): with the irrigant at rest and during XP-Endo agitation for 60 s to observe the temperature evolution. The data were statistically analysed using a t-test with a confidence level of 95%. RESULTS: DSC results suggested that the XP-Endo Finisher had a mixed R-phase and austenitic structure at room temperature. The temperature values at predetermined time points (0, 10, 40, 70, 120 and 240 s) were measured, and no statistical difference was observed between the values of the resting and activated solutions at any of the selected points (p > .05). For the protocol performed with the XP-Endo file, the mean irrigant temperature observed at instrument insertion inside the root canal was 28.65°C. After 60 s of agitation, the temperature was 34.02°C. The solution temperature stabilized inside the canal only after 211 s at 35.5°C. The mean maximum irrigation solution temperature recorded inside the canal was 35.5°C without agitation and after XP-endo agitation (p > .05). CONCLUSIONS: Although the XP-Endo Finisher system does not promote heating of the irrigation solution, file expansion responsible for improved instrument cleaning starts at a temperature below the expected value.

A Case of X-linked Intellectual Disability with Novel Chromosome 9p12-pter Unbalanced Translocation on Chromosome Xp.

Abnormalities in genes on the X chromosome or large defects in the X chromosome itself cause X-linked intellectual disability. The proband was a 27-year-old man. His medical history included strabismus, cryptorchidism, and severe intellectual disabilities. He also had epilepsy. His mother seemed to have slight intellectual disability. A physical examination revealed malformations. The lateral and fourth ventricles were dilated using computed tomography. CGG repeats in the 5' untranslated region of FMR1 gene were normal. G-banding and spectral karyotyping revealed a novel unbalanced X-autosomal translocation, with a karyotype of 46,Y,der (X) t (X;9) (p22.33;p12); distal trisomy of 9p and distal Xp nullisomy.

Impact of different activation procedures on sodium hypochlorite penetration into dentinal tubules after endodontic retreatment via confocal laser scanning microscopy.

BACKGROUND: Infected dentinal tubules are a possible source of bacteria that are responsible for the failure of root canal treatment. Therefore, disinfection of dentinal tubules by increasing the penetration of the irrigation solution is important for success in retreatment cases. This study utilized confocal laser scanning microscopy (CLSM) to assess and compare the impact of XPR, ultrasonic irrigation (UI) and sonic activation (SA) on NaOCl penetration into dentinal tubules following endodontic retreatment. METHODS: A total of forty mandibular premolars were enrolled in this investigation. Following root canal preparation up to ProTaper X3 file (30/0.07), root canals were obturated with gutta-percha and bioceramic root canal sealer with single cone technique. The root canal filling materials were removed using ProTaper nickel-titanium rotary retreatment files until the working length was reached. The retreatment procedure was finalized using the ProTaper Next X4 (40/0.06). The teeth were divided into four groups based on the irrigation activation technique: control (conventional needle irrigation), SA, UI and XPR. During the final irrigation procedure, Rhodamine B dye was introduced to 5% NaOCl for visualization via CLSM. Subsequent to image acquisition, the maximum penetration, penetration percentage, and penetration area were calculated. Data were statistically analyzed using the Kruskal-Wallis, Friedman, and Bonferroni Dunn multiple comparison tests through R software (p < 0.05). RESULTS: In the middle third, UI yielded a significantly higher penetration percentage than the control group (p < 0.05). The UI and XPR groups showed increased penetration percentages in the coronal and middle thirds compared with the apical third (P < 0.05). Maximum penetration was notably reduced in the apical third than in comparison with the coronal and middle thirds in all groups (p < 0.05). In the control, SA and XP groups, the penetration area was ranked in descending order as coronal, middle and apical (p < 0.05). Conversely, in the ultrasonic group, the penetration area was significantly lower in the apical third than in the middle and coronal thirds (p < 0.05). CONCLUSIONS: UI enhanced the penetration percentage in the middle third of the root compared with that in the control group. XPR and SA showed no significant effect on NaOCl penetration following retreatment.

Efficacy of various techniques in calcium silicate-based intracanal medicament removal: a micro-CT analysis.

The purpose of this study was to evaluate the efficacy of different techniques in removing calcium silicate intracanal medicament (Bio-C Temp). Forty human single-canaled premolars were randomly distributed into five groups (n = 8). All root canals were instrumented, then filled with Bio-C Temp. Following 1-week incubation, the intra-canal medicament was removed using one of five techniques according to tooth group: conventional syringe irrigation, Endo Activator, passive ultrasonic irrigation (PUI), ProTaper Universal F3 and XP-endo Finisher (XPF). Micro-CT scanning was performed before and after removal of Bio-C Temp. All techniques significantly reduced the volume of Bio-C Temp (p < 0.001) without reaching complete elimination. The percentage of Bio-C Temp removed was significantly higher in the XPF group (98.2%) compared to conventional syringe irrigation (70.6%), the Endo Activator (75.7%), and the ProTaper Universal (76.6%). There was no significant difference between the XPF and PUI (95.1%) groups. None of the removal techniques were able to completely remove Bio-C Temp from the root canal. However, XPF was the most effective method, but was not statistically significant when compared to PUI. Clinical Relevance: This study demonstrated that both XPF and PUI outperform conventional irrigation in removing Bio-C Temp intracanal medicament.

Evaluation of different irrigation activation techniques for the removal of various medicaments from a simulated internal resorption cavity: an in vitro study.

OBJECTIVES: This study aimed to assess the efficacy of different activation techniques in removing calcium hydroxide (Ultracal XS), Ledermix, and Bio-C Temp from simulated internal root resorption (IRR) cavities. MATERIALS AND METHODS: 108 single-rooted maxillary incisors were prepared using Reciproc R50 files. Simulated IRR cavities, 2 mm in diameter and located 8 mm from the apex, were created. Ultracal XS, Ledermix, and Bio-C Temp were applied to the samples, grouped by irrigation activation techniques: Standard Needle Irrigation (SNI), EDDY, Passive Ultrasonic Irrigation (PUI), and XP-endo Finisher (XPF). Medicament removal efficacy was evaluated using a standardized scoring system. Statistical analysis was performed using the Kruskal-Wallis test. RESULTS: XPF and PUI were more effective than SNI in medicament removal across the groups, with no significant difference. EDDY showed no significant difference than other groups. Ledermix was more effectively removed in all activation groups compared to Bio-C Temp. The XPF was superior in removing Ultracal XS compared to Bio-C Temp. However, none of the groups achieved complete medicament removal. CONCLUSIONS: XPF and PUI techniques enhance medicament removal efficacy. Bio-C Temp was more difficult to remove from the IRR cavities than other medicaments. CLINICAL RELEVANCE: Bio-C Temp could be removed from the canals less effectively compared to calcium hydroxide and Ledermix. Among the tested irrigation activation methods, XPF and PUI were found to be more effective at removing the tested medicaments.

Approach to Diagnosis of TFE3-rearranged Renal Cell Carcinoma in a Limited Resource Setting: A Case Report.

This report recounts the diagnostic workup of a pediatric female who presented with hematuria secondary to a large renal mass visualized on abdominal imaging. Histologic assessment and subsequent immunohistochemistry studies were performed. Intense, unequivocal immunohistochemical expression of TFE3 and alpha-methylacyl-CoA-racemase with corresponding negativity for carbonic anhydrase IX, along with highly distinctive clinical, radiologic, gross, and microscopic findings confirmed the diagnosis of a renal cell carcinoma with TFE3 gene rearrangement - the first ever reported case in the Philippines. This case highlights the vital role and significant diagnostic impact of reliable, affordable and accessible immunohistochemistry studies in low-resource settings where molecular modalities for evaluating rare diseases are largely unavailable. Recognition of distinctive morphologic, immunohistochemical, and cytogenetic features in childhood and adolescent renal malignancies allows for the timely institution of therapeutic interventions for this aggressive entity.

NMRK2 is an efficient diagnostic indicator for Xp11.2 translocation renal cell carcinoma.

Xp11.2 translocation renal cell carcinomas (tRCC) are a rare and highly malignant type of renal cancer, lacking efficient diagnostic indicators and therapeutic targets. Through the analysis of public databases and our cohort, we identified NMRK2 as a potential diagnostic marker for distinguishing Xp11.2 tRCC from kidney renal clear cell carcinoma (KIRC) and kidney renal papillary cell carcinoma (KIRP) due to its specific upregulation in Xp11.2 tRCC tissues. Mechanistically, we discovered that TFE3 fusion protein binds to the promoter of the NMRK2 gene, leading to its upregulation. Importantly, we established RNA- and protein-based diagnostic methods for identifying Xp11.2 tRCC based on NMRK2 expression levels, and the diagnostic performance of our methods was comparable to a dual-color break-apart fluorescence in situ hybridization assay. Moreover, we successfully identified fresh Xp11.2 tRCC tissues after surgical excision using our diagnostic methods and established an immortalized Xp11.2 tRCC cell line for further research purposes. Functional studies revealed that NMRK2 promotes the progression of Xp11.2 tRCC by upregulating the NAD+/NADH ratio, and supplementation with ß-nicotinamide mononucleotide (NMN) or nicotinamide riboside chloride (NR), effectively rescued the phenotypes induced by the knockdown of NMRK2 in Xp11.2 tRCC. Taken together, these data introduce a new diagnostic indicator capable of accurately distinguishing Xp11.2 tRCC and highlight the possibility of developing novel targeted therapeutics. © 2024 The Pathological Society of Great Britain and Ireland.

In Vitro Cone Beam CT Analysis of the Efficacy of Three Supplementary Steps In the Removal of Obturation Material in Endodontic Retreatment.

OBJECTIVES: To evaluate and compare the efficacy of XP-endo Finisher R (FKG Dentaire, Le Locle, Neuchatel, Switzerland), EDDY (VDW Dental, Munich, Germany), and passive ultrasonic irrigation (PUI) as supplementary steps following the D-RaCe retreatment file system (FKG Dentaire) in the removal of root canal obturation material using cone beam CT. MATERIALS AND METHODS: A total of 45 two-rooted permanent maxillary first premolars were selected. Following access preparation, cleaning, and shaping with Hero Shaper (Micro Mega, Besançon, BFC, France) rotary file up to 25/04%, thermoplasticized obturation was performed with TotalFill BC sealer (FKG Dentaire) and gutta-percha. The specimens were subjected to routine retreatment using the D-RaCe retreatment file system. Cone beam computed tomography (CBCT) and volumetric analysis were performed before and after this procedure. The samples were divided into group A (XP-endo Finisher R: n=15), group B (EDDY: n=15), and group C (PUI: n=15). Finally, a third CBCT was taken and a volumetric analysis was done. Statistical analysis was done using SPSS Statistics version 26.0 (IBM Corp., Armonk, NY, USA). RESULTS: The lowest mean residual volume of obturation material was seen with XP-endo Finisher R (1.6 mm3), followed by PUI (1.7 mm3). The EDDY showed the least efficiency in complete debridement of the root canals (3.6 mm3). This difference in values was statistically significant. CONCLUSION: The XP-endo Finisher R and PUI showed superior performance than EDDY in the removal of remaining obturation material from the root canal system after retreatment with the D-RaCe retreatment file system. However, none of the systems were able to completely remove the root canal obturation materials.

Optimizing Root Canal Therapy: An In Vitro Comparative Study of Innovative File Systems on Mandibular Premolar Fracture Resistance.

INTRODUCTION AND AIM:  Root canal therapy is a vital procedure for saving teeth by removing infection and cleaning the complex root canal system. However, a delicate balance exists between thorough cleaning and preserving tooth strength. The study aims to evaluate the instrumentation effect of three innovative file systems, XP-endo® shaper, Reciproc®, and Self-adjusting file (SAF) on fracture resistance of mandibular premolars. MATERIALS AND METHODS: Thirty single-rooted mandibular premolars were collected; a standard access cavity was prepared and the working length was established 1 mm short of the apex. The teeth were randomly divided into three groups(n=10). In Group 1, the shaping of the specimens was achieved using XP-endo® shaper; in Group 2, it was instrumented using Reciproc® file; and in Group 3, it was instrumented using SAF. All samples were decoronated and the roots were mounted vertically in acrylic resin and subjected to fracture resistance under a universal testing machine. RESULTS: Intergroup analysis was done by one-way ANOVA followed by Bonferroni post hoc test, which did not report a statistically significant difference (p>0.05). CONCLUSION: All three tested file systems were similar in fracture resistance. XP-endo® shaper exhibited better fracture resistance on root canal instrumentation when compared to Reciproc® and SAF although they are not statistically significant.

Four years of natural progressive course: A rare case report of juvenile Xp11.2 translocations renal cell carcinoma with TFE3 gene fusion.

Background: Renal cell carcinoma (RCC) with TFE3 gene fusion caused by Xp11.2 translocations is a rare RCC subtype. This tumor is typically seen in children, comprising 20‒40% of overall RCC cases compared to 1‒1.6% observed in adults. Xp11.2 RCC is associated with a poor prognosis due to both the progression of local lesions and early distant and lymphatic metastasis. Case presentation: A case of RCC with Xp11.2 RCC translocations and TFE3 gene fusion was found in a pediatric patient, illustrating the catastrophic effects of ignoring the condition. The tumor developed from a local lesion to lymph metastasis (3.2-12 cm) within 4 years. Despite ongoing controversy, surgical resection remains the most common and productive approach. In this patient, renal retroperitoneal lymph node dissection and radical nephrectomy of the left kidney were performed via laparoscopic surgery. The RCC-associated Xp11.2 translocation/TFE3 gene fusions were identified by postoperative pathology. Microscopic analysis showed the presence of intravascular cancer thrombus, renal sinus invasion, and cancer necrosis. The pathological stages were confirmed as PT3aN1M0 with a negative margin. Follow-up at 5 months showed that the patient recovered without the use of any adjuvant treatments. Conclusion: Our study highlights the natural course, diagnosis, and treatment of RCC-associated Xp11.2 translocation/TFE3 gene fusions, especially the necessity of early surgery. This case may be a helpful reference for urologists in the treatment of similar cases. It also serves as a precautionary signal for patients who neglect the renal neoplasm.

A Case of CDKL5 Deficiency Due to an X Chromosome Pericentric Inversion: Delineation of Structural Rearrangements as an Overlooked Recurrent Pathological Mechanism.

CDKL5 deficiency disorder (CDD) is an X-linked dominant epileptic encephalopathy, characterized by early-onset and drug-resistant seizures, psychomotor delay, and slight facial features. Genomic variants inactivating CDKL5 or impairing its protein product kinase activity have been reported, making next-generation sequencing (NGS) and chromosomal microarray analysis (CMA) the standard diagnostic tests. We report a suspicious case of CDD in a female child who tested negative upon NGS and CMA and harbored an X chromosome de novo pericentric inversion. The use of recently developed genomic techniques (optical genome mapping and whole-genome sequencing) allowed us to finely characterize the breakpoints, with one of them interrupting CDKL5 at intron 1. This is the fifth case of CDD reported in the scientific literature harboring a structural rearrangement on the X chromosome, providing evidence for the hypothesis that this type of anomaly can represent a recurrent pathogenic mechanism, whose frequency is likely underestimated, with it being overlooked by standard techniques. The identification of the molecular etiology of the disorder is extremely important in evaluating the pathological outcome and to better investigate the mechanisms associated with drug resistance, paving the way for the development of specific therapies. Karyotype and genomic techniques should be considered in all cases presenting with CDD without molecular confirmation.

Cleaning efficacy and debris extrusion of supplementary file systems XP-endo Finisher and XP-endo Finisher R in endodontic retreatment.

Aim: To evaluate cleaning efficacy and debris extrusion of supplementary file systems XP Endo Finisher (XPEF) and XP Endo Finisher R (XPEFR) in endodontic retreatment. Materials and Methods: Thirty single-rooted teeth with single canals were selected, canal preparation done till file #30 6% and obturation completed using lateral condensation technique with AH Plus sealer. The samples were stored at 37°C in a 100% humidity incubator for 7 days. The samples were distributed across the three groups according to the method of retreatment (n = 10): Group I: Neo Endo retreatment (NER) files, Group II: NER files + XPEF, and Group III: NER files + XPEFR. Removal of gutta percha using each file system according to the distributed groups was performed. The extruded debris was collected in an Eppendorf tube, dried in a hot air oven, and weighed. Teeth were sliced longitudinally using carborundum discs. Coronal, middle, and apical thirds were assessed for cleaning efficacy under a stereomicroscope. Results were tabulated and subjected to the statistical analysis using the Kruskal-Wallis H-test followed by post hoc turkey HSD test. All statistical tests were carried out at significance level P < 0.05. Results: It was seen that Group II (NER files + XPEF) exhibited better cleaning efficacy than Group III (NER files + XPEFR), although the results were not statistically significant. Greater debris extrusion was seen with Group III when compared to Group II. Conclusion: Supplementary files XPEF/XPEFR enhance the cleaning efficacy in endodontic retreatment, but the debris extrusion of XPEFR is more than XPEF.

Effects of Access Cavity Design and Placement Techniques on Mineral Trioxide Aggregate Obturation Quality in Simulated Immature Teeth: A Micro-Computed Tomography Study.

Background and Objectives: In teeth with open apices, performing single session apexification is a challenging treatment due to the difficulty in handling mineral trioxide aggregate (MTA). Minimally invasive approaches in dentistry have also influenced the cavity designs in endodontics. Until now, different techniques have not been investigated in addition to manual condensation during the process of placing MTA in traditional (TradACs) or conservative (ConsACs) endodontic access cavities. The aim of this in vitro study was to compare and evaluate the obturation quality of MTA apical plugs placed with different techniques in TradACs or ConsACs. Materials and Methods: Sixty upper central teeth were divided into two main groups based on cavity design, and then each main group was further divided into three subgroups according to MTA placement techniques (n = 10): TradAC-manual, TradAC-manual + indirect ultrasonic activation, TradAC-manual + XP-endo Shaper (XPS), ConsAC-manual, ConsAC-manual + indirect ultrasonic activation, and ConsAC-manual + XPS. Subsequently, the porosity percentages in the MTA apical plug were analyzed using micro-computed tomography. The statistical analysis was performed using the Kruskal-Wallis H test and Mann-Whitney U test. Statistical significance was set at p < 0.05. Results: There were differences in volume of porosity percentages (%) according to cavity designs and MTA application techniques (p < 0.05). Except for the XPS group, more porosity was observed in ConsACs compared to TradACs. In TradACs, the significantly lowest open and total porosity was observed in the manual, ultrasonic, and XPS techniques, respectively. In ConsACs, the significantly lowest porosity was observed in the manual, XPS, and ultrasonic techniques, respectively (p < 0.05). Conclusions: In MTA obturation, cavity designs and application techniques had an impact on the MTA porosity. Creating an apical plug in ConsACs may result in more porosity compared to TradACs, especially when manual or indirect ultrasonic activation is preferred. Opting for the manual technique alone may be considered sufficient for controlling porosity for both TradACs and ConsACs.

Extrusion of Sodium Hypochlorite in Oval-Shaped Canals: A Comparative Study of the Potential of Four Final Agitation Approaches Employing Agarose-Embedded Mandibular First Premolars.

Background: The aim of this investigation was to assess the apical extrusion potential of sodium hypochlorite (NaOCl) in agarose-embedded mandibular first premolars employing four final agitation procedures. Methods: Based on CBCT confirmation of single oval-shaped canals, one hundred extracted mandibular first premolars were chosen. Using 5.25% NaOCl, the teeth were prepared using the XP Endo Shaper and divided into experimental and control groups. The following were the experimental groups: Group 1 comprised the XP-Endo Finisher, Group 2 the Ultrasonic Activation, Group 3 the Gentle File Finisher Brush, and Group 4 the 27-gauge side-vented needle. To test extrusion, the teeth were placed in a 0.2% agarose gel that contained the pH-sensitive dye m-cresol purple, allowing pixel quantification via ImageJ software (version 1.54i). Results: The XP Endo Finisher featured the most pixels, depicting higher apical extrusion (p < 0.01), followed by the side-vented needle, Gentle File Finisher Brush, and PUI, while the Control Group endured no extrusion. Conclusions: The effective irrigation method for root canal therapy is critical, especially in situations of open apices, resorption, or perforation. According to in vitro experiments, the XP-Endo Finisher has the maximum sodium hypochlorite extrusion, which is determined by parameters such as apical preparation size and irrigation system.

Impact of using XP-endo finisher and nanobubble water during EDTA dentin conditioning on TGF-ß1 release in regenerative endodontic procedures.

INTRODUCTION: Transforming Growth Factor-Beta 1 (TGF-ß1) plays a crucial role in the success of Regenerative Endodontic Procedures (REPs) as they directly impact the proliferation and differentiation of stem cells. TGF-ß1 is released by conditioning of the dentin matrix using 17% EDTA. EDTA was found to have deleterious effects on dentin especially in immature teeth with fragile dentin walls. Decreasing the irrigation time was reported to decrease these effects. Accordingly, enhancement and activation of the EDTA solution to maintain its efficiency in TGF-ß1 release from dentin and thus compensating the reduction in irrigation time was employed. EDTA solution was enhanced by adding Nanobubble (NB) water which contains oxygen filled cavities less than 200 nm in diameter. Additionally, EDTA was activated with XP-endo Finisher rotary file. The aim of this study was to assess the impact of NB enhancement and/or XP-endo Finisher activation of the EDTA solution on the TGF-ß1 release from dentin. METHODS: Fifty standardized root segments with open apex were allocated to two main groups according to whether EDTA was enhanced with NB water or not, and within each group whether XP-endo Finisher activation was used or not in addition to a Negative Control group. The concentration of the released TGF-ß1 in the root canal was measured using enzyme-linked immunosorbent assay (ELISA). The statistical analysis was done using the Shapiro- Wilk, Kolmogorov Smirnov, ANOVA and Post-hoc Tukey tests. RESULTS: All groups released a considerable amount of TGF-ß1 with the highest values in the EDTA/NB/XP group, followed by EDTA/NB, EDTA/DW/XP, EDTA/DW and Negative Control groups respectively. CONCLUSIONS: The results of this study suggest that NBs can promote the success of REPs since it revealed a significant increase in the TGF-ß1 release following its use in the enhancement of the EDTA solution. A comparable effect was obtained by XP-endo finisher activation of the EDTA solution. The combined use of NBs and XP-endo Finisher can be a promising addition in REPs. Accordingly, Enhancement and activation of the EDTA solution may compensate decreasing the EDTA irrigation time attempted to avoid the deleterious effect of EDTA on dentin.

Comparative effects of 17% ethylenediaminetetraacetic acid and 9% etidronic acid applied with different irrigant activation techniques on the release of growth factors from dentin: in vitro study.

BACKGROUND: Growth factors embedded in the extracellular matrix of the dentin play an important role in the migration, proliferation, and differentiation of dental pulp stem cells in regenerative endodontics. In regenerative endodontic treatments, the type of irrigation solution used is crucial for the release of growth factors (GFs) from the dentin matrix. This study evaluated the effectiveness of different irrigant activation techniques (IAT) using two different chelating agents, 17% ethylenediaminetetraacetic acid (EDTA) and 9% etidronic acid (HEDP), in terms of their GF release. METHODS: Seventy-two mandibular premolar teeth were prepared to simulate an open apex. The root fragments were irrigated with 20 ml of 1.5% sodium hypochlorite and 20 ml of saline solution. Eight root fragments were randomly separated for the control group, and the remaining 64 fragments were randomly separated into eight groups based on two different chelating agents (17% EDTA and 9% HEDP) and four different IAT ((conventional needle irrigation (CNI), passive ultrasonic irrigation (PUI), sonic activation with EDDY, and XP-endo Finisher (XPF)). TGF-ß1, VEGF-A, BMP-7 and IGF-1 release levels were determined using an ELISA, and statistical analysis was performed using the Kolmogorov-Smirnov test, ANOVA, and the Tukey test (p < .05). RESULTS: Compared to the control group, the experimental groups showed significantly higher GF release when using EDTA or HEDP. Among the activation groups, the EDDY group triggered the highest GF release, and the CNI group triggered the lowest. CONCLUSIONS: IAT with EDTA and HEDP can increase GF release, with EDDY being the most effective IAT method. Using chelating agents with IAT may be beneficial in regenerative endodontic treatments.

Evaluation of canal patency and cleanliness following retreatment of bioceramic sealer-obturated root canals using three different irrigant activation protocols.

This study evaluated the effectiveness of three different irrigant activation techniques in cleaning and establishing patency during retreatment of root canals obturated with gutta-percha and bioceramic sealer. 60 extracted premolars with oval-shaped canals were instrumented and obturated with gutta-percha and EndosequenceBC sealer using the 'warm hydraulic condensation' technique. The teeth were retreated using Protaper Universal Retreatment and XP-Endo Shaper system and divided into four groups according to the irrigant activation protocol used: control, passive ultrasonic irrigation (PUI), Endovac irrigation (EVI) and XP-Endo Finisher R (XPFR). Apical patency was achieved in all the samples of the XPFR group (100%), which showed a significantly higher success rate compared with the control (73.3%) and EVI groups (73.3%) (p < 0.05). The scanning electron microscopic evaluation revealed significantly cleaner middle and apical third root canals in the PUI and XPFR groups compared with the control group (p < 0.05). These findings suggest that XPFR effectively cleans and establishes patency in root canals filled with bioceramic sealers.

Exploring G-quadruplex structure in PRCC-TFE3 fusion oncogene: Plausible use as anti cancer therapy for translocation Renal cell carcinoma (tRCC).

The TFE3 fusion gene, byproduct of Xp11.2 translocation, is the diagnostic marker for translocation renal cell carcinoma (tRCC). Absence of any clinically recognized therapy for tRCC, pressing a need to create novel and efficient therapeutic approaches. Previous studies shown that stabilization of the G-quadruplex structure in oncogenes suppresses their expression machinery. To combat the oncogenesis caused by fusion genes, our objective is to locate and stabilize the G-quadruplex structure within the PRCC-TFE3 fusion gene. Using the Quadruplex-forming G Rich Sequences (QGRS) mapper and the Non-B DNA motif search tool (nBMST) online server, we found putative G-quadruplex forming sequences (PQS) in the PRCC-TFE3 fusion gene. Circular dichroism demonstrating a parallel G-quadruplex in the targeted sequence. Fluorescence and UV-vis spectroscopy results suggest that pyridostatin binds to this newly discovered G-quadruplex. The PCR stop assay, as well as transcriptional or translational inhibition using real time PCR and Dual luciferase assay, revealed that stable G-quadruplex formation affects biological processes. Confocal microscopy of HEK293T cells transfected with the fusion transcript confirmed G-quadruplexes formation in cell. This investigation may shed light on G-quadruplex's functions in fusion genes and may help in the development of therapies specifically targeted against fusion oncogenes, which would enhance the capability of current tRCC therapy approach.