Clinical usefulness and acceptability of small-bowel capsule endoscopy with panoramic imaging compared with axial imaging in Japanese patients.

Objectives: We aimed to evaluate the usefulness and acceptability of CapsoCam Plus (CapsoCam) in Japanese patients. Methods: This retrospective single-center study enrolled 930 patients with suspected small-bowel bleeding (SSBB) who underwent capsule endoscopy. Thirty-three patients using CapsoCam and PillCam SB3 (SB3) were matched using propensity score matching. The diagnostic yield and the acceptability of CapsoCam were evaluated. Results: There was no SSBB case where capsule endoscopy was performed within 48 h of bleeding. CapsoCam had a significantly higher observation rate of the entire small bowel (97% vs. 73%, p = 0.006) and Vater's papilla (82% vs. 15%, p < 0.001) than SB3. The reading time of CapsoCam was significantly longer than that of SB3 (30 vs. 25 min, p < 0.001), and CapsoCam's time from the capsule endoscopy swallowing to read completion was longer than that of SB3 (37 vs. 12 h, p < 0.001). The two groups showed no difference in the capsule endoscopy findings according to the P classification. Notably, 85% of the patients using CapsoCam reported examination distress as "not at all" or "almost not," and 94% reported swallowing difficulty as "very easy" or "easy." Conclusions: CapsoCam took time to read; however, it is a well-tolerated examination with a high observation rate of Vater's papilla and entire small-bowel mucosa. Detectability of bleeding sources was comparable in both modalities for cases of occult SSBB and overt SSBB more than 48 h after bleeding. CapsoCam is a useful modality for patients with SSBB.

Combining slow-release fertilizer and plastic film mulching reduced the carbon footprint and enhanced maize yield on the Loess Plateau.

Agricultural practices significantly contribute to greenhouse gas (GHG) emissions, necessitating cleaner production technologies to reduce environmental pressure and achieve sustainable maize production. Plastic film mulching is commonly used in the Loess Plateau region. Incorporating slow-release fertilizers as a replacement for urea within this practice can reduce nitrogen losses and enhance crop productivity. Combining these techniques represents a novel agricultural approach in semi-arid areas. However, the impact of this integration on soil carbon storage (SOCS), carbon footprint (CF), and economic benefits has received limited research attention. Therefore, we conducted an eight-year study (2015-2022) in the semi-arid northwestern region to quantify the effects of four treatments [urea supplied without plastic film mulching (CK-U), slow-release fertilizer supplied without plastic film mulching (CK-S), urea supplied with plastic film mulching (PM-U), and slow-release fertilizer supplied with plastic film mulching (PM-S)] on soil fertility, economic and environmental benefits. The results revealed that nitrogen fertilizer was the primary contributor to total GHG emissions (≥71.97%). Compared to other treatments, PM-S increased average grain yield by 12.01%-37.89%, water use efficiency by 9.19%-23.33%, nitrogen accumulation by 27.07%-66.19%, and net return by 6.21%-29.57%. Furthermore, PM-S decreased CF by 12.87%-44.31% and CF per net return by 14.25%-41.16%. After eight years, PM-S increased SOCS (0-40 cm) by 2.46%, while PM-U decreased it by 7.09%. These findings highlight the positive effects of PM-S on surface soil fertility, economic gains, and environmental benefits in spring maize production on the Loess Plateau, underscoring its potential for widespread adoption and application.

Genotypes, epidemiological variables and fungicides application associated with wheat leaf rust development and grain yield.

The present study was carried out at the Plant Pathology Hafizabad Research Station, the University of Layyah, during the crop seasons 2021-2022 and 2022-2023 to evaluate the response of various wheat genotypes against leaf rust severity (%), environmental conditions favourable for disease development and grain yield. Except for minimum temperature and minimum relative humidity, which had a negative association with disease development, there was a significant correlation between leaf rust severity (%) and all environmental conditions such as maximum temperature, maximum relative humidity, rainfall, and wind speed. All epidemiological variables such as maximum temperature, minimum temperature, minimum relative humidity, rainfall and wind speed significantly affect the disease progression. The disease predictive model accounted for 48-69 % variability in leaf rust severity. The model performance was evaluated using the coefficient of determination (R2 = 0.69) and RMSE, both demonstrated acceptable predictive results for leaf rust severity (%) management. Leaf rust severity (%) increased with an increase in maximum temperature (17.8-30 °C), maximum relative humidity (76.3-85 %), rainfall (2.2-10.85 mm) and wind speed 1.1-2.7 km/h and decreased with the increase of minimum temperature (7.91-16.71 °C) minimum relative humidity (47.15-56.45 %) during both rating seasons 2021-2022 and 2022-2023. The single and two applications of fungicides at the Zadok's scale 3, ZS 4.3, and ZS 5.4 stages led to a significant reduction in grain yield losses caused by leaf rust severity (%) in both the 2021-2022 and 2022-2023 crop seasons. Single and two sprays of prothioconazole, were found to be the first choice among all treatments to reduce the disease severity and increase grain production and maximum gross revenue (513.1-777.8$/ha), as compared to followed by single and two sprays of propiconazole (Progress), tebuconazole + trifloxystrobin, tebuconazole, bixafen + tebuconazole, and propiconazole (Tilt), respectively. These findings recommend the involvement of genotype resistance and weather predictors in wheat leaf rust development, along with fungicide application studies, to improve the predictability of host resistance to disease, future models, and the sustainability of disease control methods.

Impact of "3414" fertilization on the yield and quality of greenhouse tomatoes.

This study aimed to explore the effects of different nitrogen, phosphorus, and potassium ratios on the yield and nutritional quality of greenhouse tomatoes under a water and fertilizer integration model. Greenhouse tomatoes were used as the research object, and the "3414" fertilizer trial design was employed to assess tomato growth, yield, quality, and soil indicators across various treatment combinations. The goal was to determine the optimal fertilization scheme and recommend appropriate fertilizer quantities for tomato cultivation and production. The results revealed that different fertilizer ratios significantly affected both the quality and yield of tomatoes. Overall, the tomato yield tended to increase with higher fertilization amounts, with potassium exhibiting the most pronounced effect on yield increase, followed by phosphorus and nitrogen. The comprehensive analysis of principal components indicated that the N2P2K1 treatment yielded the highest nutritional quality and yield. Therefore, the best fertilization combination identified in this study consisted of nitrogen fertilizer at 197.28 kg hm-2, phosphorus fertilizer at 88.75 kg hm-2, and potassium fertilizer at 229.80 kg hm-2. These findings provided the scientific basis for optimizing fertilization practices in greenhouse tomato cultivation and production in the Jilin Province.

Molecular selection of soybean towards adaptation to Central European agroclimatic conditions.

Europe is highly dependent on soybean meal imports and anticipates an increase of domestic plant protein production. Ongoing climate change resulted in northward shift of plant hardiness zones, enabling spring-sowing of freezing-sensitive crops, including soybean. However, it requires efficient reselection of germplasm adapted to relatively short growing season and long-day photoperiod. In the present study, a PCR array has been implemented, targeting early maturity (E1-E4, E7, E9, and E10), pod shattering (qPHD1), and growth determination (Dt1) genes. This array was optimized for routine screening of soybean diversity panel (204 accessions), subjected to the 2018-2020 survey of phenology, morphology, and yield-related traits in a potential cultivation region in Poland. High broad-sense heritability (0.84-0.88) was observed for plant height, thousand grain weight, maturity date, and the first pod height. Significant positive correlations were identified between the number of seeds and pods per plant, between these two traits and seed yield per plant as well as between flowering, maturity, plant height, and first pod height. PCR array genotyping revealed high genetic diversity, yielding 98 allelic combinations. The most remarkable correlations were identified between flowering and E7 or E1, between maturity and E4 or E7 and between plant height and Dt1 or E4. The study demonstrated high applicability of this PCR array for molecular selection of soybean towards adaptation to Central Europe, designating recessive qPHD1 and dominant Dt1, E3, and E4 alleles as major targets to align soybean growth season requirements with the length of the frost-free period, improve plant performance, and increase yield.

Flow properties of single origin chocolates: Effect of product formulation and particle size.

The objective of this research was to evaluate changes in flow behavior of chocolate during chocolate grinding using a stone grinder as affected by chocolate formulation. Three different types of chocolates were evaluated. Two chocolates without milk added (70% chocolate) and two chocolates with milk added and with different amounts of cocoa nibs (30% chocolate and 14% chocolate) were tested. For the 70% chocolates, nibs of two different origins were used; therefore, a total of four samples were evaluated. Chocolates were processed in a stone grinder, and samples were taken as a function of grinding time. For each timepoint, the flow behavior of the samples was measured using a rotational rheometer and fitted to the Casson model. Particle size was measured using a laser scattering instrument. Results showed that yield stress increased linearly while the Casson plastic viscosity decreased exponentially with grinding time (smaller particles). Particle size distribution of the chocolates showed a prominent bimodal distribution for short grinding times (∼9 h) with small (∼15 µm) and large (∼100 µm) particles; with longer grinding time, the population of larger particles decreased. Yield stress values were higher for the 70% chocolate, but they were not very different between the two milk chocolates tested. The Casson plastic viscosity was greatest for the 70% chocolate, followed by the 30% chocolate. The 14% chocolate had the lowest Casson plastic viscosity. Changes of Casson plastic viscosity with particle size were more evident for the dark chocolates compared to the milk ones. These results are helpful to small chocolate producers who need better understanding of how the formulation and grinding of chocolate affect its flow behavior, which will ultimately affect chocolate handling during production.

Effective multidimensional treatment identification of different chemical fertilizers: Response of insect dynamics and rice production.

Effective management of fertilizers is essential in influencing the prevalence of insects in rice (Oryza sativa L.) fields. Over two years (2019-20 and 2020-21), an experiment conducted at Bangladesh Rice Research Institute (BRRI), Habiganj, during the boro season aimed to identify the most effective multidimensional treatment (EMT) by testing various combinations of chemical fertilizers and its effect on rice insects. The goal was to optimize rice grain yield while minimizing harmful insect infestation and supporting natural enemies. Eight different chemical fertilizer applications were used as follows: T1 contained a full mix of nitrogen (N), phosphorus (P), potassium (K), and sulfur (S); T2 had PKS but lacked N; T3 had NKS but lacked P; T4 had NPS but lacked K; T5 had NPK but lacked S; T6 had KS but lacked N and P; T7 had PS but lacked N and K; and T8 lacked all four elements - N, P, K, and S. The relationship between the dynamics of harmful insects and natural enemies was highly positively correlated (r = 0.72 to 0.97). In two consecutive growing years, the 2020-21 season exhibited notably higher counts of harmful insects, with Rice Leafroller (RLR) dominating in the booting stage and White Backed Planthopper (WBPH) in mid-tillering, while Green Mirid Bug (GMB) prevailed among natural enemies across both stages, surpassing insect pest counts, notably GMB, Lady bird beetle (LBB), Carabid beetle (CDB), and Staphylinid (STD). However, the yield was notably higher in the 2019-20 growing season despite these pest pressures. Throughout the mid-tillering and booting stages, T1 consistently exhibited the highest average populations of harmful insects and natural enemies, while T7 demonstrated the lowest count of harmful insects, followed by T2 at both growth stages. Additionally, the highest grain yield (GY) was consistently recorded in T1, followed by T5, T6, and T3, with yields of 7.98 t/ha, 7.63 t/ha, 7.38 t/ha, and 7.33 t/ha, respectively. In both stages, beneficial insects prevailed over harmful ones in all fertilizer applications, with significant declines noted in T2 and T7. Factor analysis showed successful selection for EMT in the MGIDI index for all variables except INT and GY during the 2019-20 season, with selection differentials (SD) ranging from -0.10 to 8.29. However, in 2020-21, selection was achieved for all variables with SD ranging from 0.37 to 6.08. According to the MGIDI index, the top-ranked EMTs were identified as T4 and T3 for the 2019-20 period, and T3 and T5 for the 2020-21 period. The EMT shared in both years, T3, proved effective because of its positive impact on enhancing natural enemies throughout both periods (with SD ranging from 4.76 to 8.29 for 2019-20 and 3.03 to 6.08 for 2020-21), and its notable contribution to rice grain yield (SD = 0.37) in 2020-21. This study uniquely integrates EMT to optimize rice grain yield while simultaneously managing harmful insect infestations and supporting natural enemies, addressing a critical need in sustainable rice cultivation. The suggestion is to give preference to fertilizer application T3, which omits P but contains N and K, to improve rice grain yield and boost natural enemies, thereby reducing harmful insect infestation. Moreover, future investigations should concentrate on refining fertilizer blends to strike a harmony between maximizing yield and fostering ecological robustness in rice cultivation.

Optimizing agricultural sustainability: enriched organic formulations for growth, yield, and soil quality in a multi-crop system.

Utilizing agricultural and industrial wastes, potent reservoirs of nutrients, for nourishing the soil and crops through composting embodies a sustainable approach to waste management and organic agriculture. To investigate this, a 2-year field experiment was conducted at ICAR-IARI, New Delhi, focusing on a pigeon pea-vegetable mustard-okra cropping system. Seven nutrient sources were tested, including a control (T1), 100% recommended dose of nitrogen (RDN) through farmyard manure (T2), 100% RDN through improved rice residue compost (T3), 100% RDN through a paddy husk ash (PHA)-based formulation (T4), 75% RDN through PHA-based formulation (T5), 100% RDN through a potato peel compost (PPC)-based formulation (T6), and 75% RDN through PPC-based formulation (T7). Employing a randomized block design with three replications, the results revealed that treatment T4 exhibited the significantly highest seed (1.89 ± 0.09 and 1.97 ± 0.12 t ha-1) and stover (7.83 ± 0.41 and 8.03 ± 0.58 t ha-1) yield of pigeon pea, leaf yield (81.57 ± 4.69 and 82.97 ± 4.17 t ha-1) of vegetable mustard, and fruit (13.54 ± 0.82 and 13.78 ± 0.81 t ha-1) and stover (21.64 ± 1.31 and 22.03 ± 1.30 t ha-1) yield of okra during both study years compared to the control (T1). Treatment T4 was on par with T2 and T6 for seed and stover yield in pigeon pea, as well as okra, and leaf yield in vegetable mustard over both years. Moreover, T4 demonstrated notable increase of 124.1% and 158.2% in NH4-N and NO3-N levels in the soil, respectively, over the control. The enhanced status of available nitrogen (N) and phosphorus (P) in the soil, coupled with increased soil organic carbon (0.41%), total bacteria population (21.1%), fungi (37.2%), actinomycetes (44.6%), and microbial biomass carbon (28.5%), further emphasized the positive impact of T4 compared to the control. Treatments T2 and T6 exhibited comparable outcomes to T4 concerning changes in available N, P, soil organic carbon, total bacteria population, fungi, actinomycetes, and microbial biomass carbon. In conclusion, treatments T4 and T6 emerge as viable sources of organic fertilizer, particularly in regions confronting farmyard manure shortages. These formulations offer substantial advantages, including enhanced yield, soil quality improvement, and efficient fertilizer utilization, thus contributing significantly to sustainable agricultural practices.

Impact of climate change on the yield of medicinal plants in recent years.

Climate change significantly impacts the yield and quality of medicinal plants due to alterations in temperature, precipitation patterns, and increased frequency of extreme weather events. These changes affect the growth, secondary metabolite production, and geographical distribution of medicinal plants, leading to reduced yields and compromised medicinal properties. Adaptive strategies such as developing climate-resilient plant varieties, sustainable agricultural practices, and enhanced conservation efforts are essential to mitigate these effects. Increased research and collaborative efforts are necessary to safeguard these vital resources for future generations.

Enhancing aromatic rice production through agronomic and nutritional management for improved yield and quality.

To meet the growing international demand for aromatic rice, this study, conducted at Uttar Banga Krishi Viswavidyalaya in Cooch Behar, West Bengal, aimed to enhance the yield and quality of the 'Tulaipanji' rice cultivar through advanced establishment methods and the use of organic nutrients over two years. The research tested three planting techniques: mechanical transplanting, wet direct seeding (using a drum seeder), and traditional methods, alongside four nutrient management strategies: vermicompost, farmyard manure, a mix of both, and conventional fertilizers. Findings revealed that mechanical transplanting significantly increased yield by over 31.98% and 71.05% compared to traditional methods and wet direct seeding, respectively. Using vermicompost alone as a nutrient source not only boosted yields by 21.31% over conventional fertilizers but also enhanced the rice's nutritional value and cooking quality. Moreover, soils treated with vermicompost showed higher dehydrogenase activity, indicating better soil health. Economically, mechanical transplanting with vermicompost was the most beneficial, yielding the highest net returns and benefit-cost ratios in both years studied. This approach presents a viable model for improving the sustainability of aromatic rice production globally, emphasizing the economic and environmental advantages of adopting mechanical planting techniques and organic fertilization methods.

Exploiting Mixed Valence Charge Transfer for Electrochromic and Electrofluorochromic Use.

An asymmetric mixed valence fluorophore with two different electron rich termini was investigated as a dual-role active material for electrochromism and electrofluorochromism. The fluorescence quantum yield (Φfl) and emission wavelength of the fluorophore were dependent on solvent polarity. The quantum yield of the material in an electrolyte gel, on a glass substrate and in a device was 40 %, 20 % and 13 % respectively. The fluorophore further underwent two near-simultaneous electrochemical oxidations. The first oxidation resulted in a 1000 nm red shift in the absorption to broadly absorb in the NIR, corresponding to the intervalence charge transfer (IVCT). Whereas the second oxidation led to a perceived green color at 715 nm with the extinction of the NIR absorbing IVCT. Owing to the dissymmetry of the fluorophore along with its two unique oxidation sites, the IVCT gives rise to a mixed valence transfer charge (MVCT). The coloration efficiency of the fluorophore in both solution and a device was 1433 and 200 cm2 C-1, respectively. The fluorescence intensity could be reversibly modulated electrochemically. The photoemission intensity of the fluorophore was modulated with applied potential in an operating electrochromic/electrofluorochromic device. Both the dual electrochromic and the electrofluorochromic behavior of the fluorophore were demonstrated.

An avian-origin internal backbone effectively increases the H5 subtype avian influenza vaccine candidate yield in both chicken embryonated eggs and MDCK cells.

Inactivated vaccines play an important role in preventing and controlling the epidemic caused by the H5 subtype avian influenza virus. The vaccine strains are updated in response to alterations in surface protein antigens, while an avian-derived vaccine internal backbone with a high replicative capacity in chicken embryonated eggs and MDCK cells is essential for vaccine development. In this study, we constructed recombinant viruses using the clade 2.3.4.4d A/chicken/Jiangsu/GY5/2017(H5N6, CkG) strain as the surface protein donor and the clade 2.3.4.4b A/duck/Jiangsu/84512/2017(H5N6, Dk8) strain with high replicative ability as an internal donor. After optimization, the integration of the M gene from the CkG into the internal genes from Dk8 (8GM) was selected as the high-yield vaccine internal backbone, as the combination improved the hemagglutinin1/nucleoprotein (HA1/NP) ratio in recombinant viruses. The r8GMΔG with attenuated hemagglutinin and neuraminidase from the CkG exhibited high-growth capacity in both chicken embryos and MDCK cell cultures. The inactivated r8GMΔG vaccine candidate also induced a higher hemagglutination inhibition antibody titer and microneutralization titer than the vaccine strain using PR8 as the internal backbone. Further, the inactivated r8GMΔG vaccine candidate provided complete protection against wild-type strain challenge. Therefore, our study provides a high-yield, easy-to-cultivate candidate donor as an internal gene backbone for vaccine development.

The yield of genetic workup for middle-aged and elderly patients with neurological disorders in a real-world setting.

Genetic workup is becoming increasingly common in the clinical assessment of neurological disorders. We evaluated its yield among middle-aged and elderly neurological patients, in a real-world context. This retrospective study included 368 consecutive Israeli patients aged 50 years and older (202 [54.9%] males), who were referred to a single neurogenetics clinic between 2017 and mid-2023. All had neurological disorders, without a previous molecular diagnosis. Demographic, clinical and genetic data were collected from medical records. The mean age at first genetic counseling at the clinic was 62.3 ± 7.8 years (range 50-85 years), and the main indications for referral were neuromuscular, movement and cerebrovascular disorders, as well as cognitive impairment and dementia. Out of the 368 patients, 245 (66.6%) underwent genetic testing that included exome sequencing (ES), analysis of nucleotide repeat expansions, detection of specific mutations, targeted gene panel sequencing or chromosomal microarray analysis. Overall, 80 patients (21.7%) received a molecular diagnosis due to 36 conditions, accounting for 32.7% of the patients who performed genetic testing. The diagnostic rates were highest for neuromuscular (58/186 patients [31.2%] in this group, 39.2% of 148 tested individuals) and movement disorders (14/79 [17.7%] patients, 29.2% of 48 tested), but lower for other disorders. Testing of nucleotide repeat expansions and ES provided a diagnosis to 28/73 (38.4%) and 19/132 (14.4%) individuals, respectively. Based on our findings, genetic workup and testing are useful in the diagnostic process of neurological patients aged ≥50 years, in particular for those with neuromuscular and movement disorders.

Characterization of conception rate after embryo transfer in comparison with that after artificial insemination in dairy cattle.

Artificial insemination (AI) and embryo transfer (ET) are important in the reproduction of dairy cows. The conception rate after AI or ET is an essential indicator when selecting appropriate breeding methods. However, information on the environmental factors affecting ET conception rate when compared with AI is limited. We aimed to investigate environmental factors affecting ET conception rate and characterize the differences in environmental factors between AI and ET. Records of the first AI (n = 1,870,143) and ET (n = 29,922) from Holstein nulliparous, primiparous, and multiparous cows in Hokkaido, Japan, were analyzed using separate multivariable logistic regression models. For each breeding method, we grouped primiparous and multiparous cows according to milk yield at peak lactation (PY; < 25, 25-30, 30-35, ≥ 35 kg in primiparous, < 40, 40-45, 45-50, ≥ 50 kg in multiparous) and the interval from calving to first AI or ET (CFI/CFT; < 60, 60-79, 80-99, ≥ 100 d) to evaluate the effects of PY and CFI/CFT on conception rate. AI conception rate decreased with increasing PY in primiparous and multiparous cows, whereas ET conception rate did not decrease significantly. Additionally, the ET conception rate did not decrease even in primiparous and multiparous cows slightly earlier than 60 d in CFI/CFT when compared with those in CFI/CFT after 60 d, which differed from the AI conception rate. Collectively, breeding by ET leads to the avoidance of negative effects of high milk yield and calving on the conception rate, indicating that cows are fertile by ET within 60 d after calving.

Alternate solvent for soybean oil extraction based on extractability and membrane solvent recovery.

Ethyl acetate, acetone, 2-propanol, 1-propanol, and ethanol were screened among the class 3 category solvents as an alternative to hexane based on operational and occupational safety and bio-renewability potential. All five solvents exhibited higher extractability (22.3 to 23.2%) than hexane (21.5%) with soybean flour. Additionally, there was no significant difference in the fatty acid and triacylglycerol (TAG) composition of the oils extracted using alternate solvents and hexane, indicating the oil quality was not affected. More importantly, ethyl acetate (2.1%) resulted in a marginally higher yield of TAG, while 2-propanol showed a nearly equal yield to hexane. Further, membrane desolventizing was attempted to mitigate the limitations of higher thermal energy requirements. One of the polydimethylsiloxane membranes exhibited good selectivity (TAG rejection 85.8%) and acceptable flux (59.3 L·m-2·h-1) with an ethyl acetate miscella system. Under plant-simulated recirculation conditions, a two-stage membrane process reduced the oil content in permeate to 2.5%. The study revealed that ethyl acetate could potentially replace hexane, considering its higher TAG extractability and suitability for the membrane-augmented solvent recycling process in the extraction plants.

Metabolic Engineering of Corynebacterium glutamicum for the High-Level Production of l-Valine under Aerobic Conditions.

l-Valine, an essential amino acid, serves as a valuable compound in various industries. However, engineering strains with both high yield and purity are yet to be delivered for microbial l-valine production. We engineered a Corynebacterium glutamicum strain capable of highly efficient production of l-valine. We initially introduced an acetohydroxy acid synthase mutant from an industrial l-valine producer and optimized a cofactor-balanced pathway, followed by the activation of the nonphosphoenolpyruvate-dependent carbohydrate phosphotransferase system and the introduction of an exogenous Entner-Doudoroff pathway. Subsequently, we weakened anaplerotic pathways, and attenuated the tricarboxylic acid cycle via start codon substitution in icd, encoding isocitrate dehydrogenase. Finally, to balance bacterial growth and l-valine production, an l-valine biosensor-dependent genetic circuit was established to dynamically repress citrate synthase expression. The engineered strain Val19 produced 103 g/L of l-valine with a high yield of 0.35 g/g glucose and a productivity of 2.67 g/L/h. This represents the highest reported l-valine production in C. glutamicum via direct fermentation and exhibits potential for its industrial-scale production, leveraging the advantages of C. glutamicum over other microbes.

Diagnostic Yield of Urine Xpert MTB/RIF Ultra in Adults With Suspected Extrapulmonary Tuberculosis.

We assessed the diagnostic yield of urine GeneXpert MTB/RIF Ultra and factors associated with a positive test among adult patients suspected to have extrapulmonary tuberculosis. Urine Ultra was positive in 14% of participants with definite or probable tuberculosis. Hospitalization, disseminated tuberculosis, and human immunodeficiency virus infection were associated with a positive result.

Differential regulation of belowground rhizospheric ecosystem by biological and chemical nitrogen supplies: implications for maize yield enhancement mechanisms.

Nitrogen (N) content affects aboveground maize growth and nutrient absorption by altering the belowground rhizospheric ecosystem, impacting both yield and quality. However, the mechanisms through which different N supply methods (chemical and biological N supplies) regulate the belowground rhizospheric ecosystem to enhance maize yield remain unclear. To address this issue, we conducted a field experiment in northeast China, comprising three treatments: maize monocropping without N fertilizer application (MM), maize/alfalfa intercropping without N fertilizer application (BNF), and maize monocropping with N fertilizer application (CNS). The MM treatment represents the control, while the BNF treatment represents the biological N supply form, and CNS treatment represents the chemical N supply form. In the autumn of 2019, samples of maize and rhizospheric soil were collected to assess parameters including yield, rhizospheric soil characteristics, and microbial indicators. Both BNF and MM significantly increased maize yield and different yield components compared with MM, with no statistically significant difference in total yield between BNF and CNS. Furthermore, BNF significantly improved N by 12.61% and available N (AN) by 13.20% compared with MM. Furthermore, BNF treatment also significantly increased the Shannon index by 1.90%, while the CNS treatment significantly increased the Chao1 index by 28.1% and ACE index by 29.49%, with no significant difference between CNS and BNF. However, CNS had a more pronounced impact on structure of the rhizosphere soil bacterial community compared to BNF, inducing more significant fluctuations within the microbial network (modularity index and negative cohesion index). Regarding N transformation pathways predicted by bacterial functions, BNF significantly increased the N fixation pathway, while CNS significantly increased assimilatory nitrate reduction. In CNS, AN, NO3-N, NH4-N, assimilatory nitrate reduction, and community structure contributed significantly to maize yield, whereas in BNF, N fixation, community structure, community stability, NO3-N, and NH4-N played significant roles in enhancing maize yield. While CNS and BNF can achieve comparable maize yields in practical agricultural production, they have significantly different impacts on the belowground rhizosphere ecosystem, leading to different mechanisms of yield enhancement.

Optimization of subcritical water extraction for pectin extraction from cocoa pod husks using the response surface methodology.

This study optimized subcritical water extraction (SWE) conditions to maximize pectin yield from cocoa pod husk (CPH) and compared the characteristics of CPH pectin extracted through SWE with those of CPH pectin obtained through conventional extraction (CE) with citric acid. The Box-Behnken experimental design was employed to optimize SWE and examine the influence of process parameters, including temperature (100 °C-120 °C), extraction time (10-30 min), and solid:liquid ratio (SLR) (1:30-2:30 g/mL), on pectin yield. The maximum pectin yield of 6.58% was obtained under the optimal extraction conditions of 120 °C for 10 min with 1:15 g/mL SLR and closely corresponded with the predicted value of 7.29%. Compared with CE, SWE generated a higher yield and resulted in a higher degree of esterification, methoxyl content, and anhydrouronic acid value but a lower equivalent weight. The extracted pectin was pure, had low-methoxyl content, and similar melting and degradation temperatures.

Cultivation of Limnospira maxima under extreme environmental conditions in Saudi Arabia: Salinity adaptation and scaling-up from laboratory culture to large-scale production.

Limnospira maxima has been adapted to grow in high salinity and in an economically alternative medium using industrial-grade fertilizers under harsh environmental conditions in Saudi Arabia. A sequence of scaling-up processes, from the laboratory to large-scale open raceways, was conducted along with gradual adaptation to environmental stress (salinity, light, temperature, pH). High biomass concentration at harvest point and areal productivity were achieved during the harsh summer season (1.122 g L-1 and 60.35 g m-2 day-1, respectively). The average protein content was found to be above 40 % of dry weight. Changes in the color and morphological appearance of the L. maxima culture were observed after direct exposure to sunlight in the outdoor raceways. These results demonstrate a successful and robust adaptation method for algal cultivation at outdoor large-scale in harsh environment (desert conditions) and also prove the feasibility of using hypersaline seawater (42 g kg-1) as an algal growth medium.