Acrylic Polymers Containing a Nickel Salphen Complex: An Approach to Supramolecular and Macromolecular Systems.

The synthesis, characterization and crystallographic analysis is reported of a new Nickel Salphen complex and its radical copolymerization with n-butyl acrylate and methyl methacrylate to produce novel host macromolecules with tunable association against guest anions. Spectrophotometric titrations of the complex and of the polymers revealed that a supramolecular regulation of guest-binding accessibility was enabled by the number of Ni-Salphen units per chain. The latter content in turn, determined the chain size and molecular weight uniformity upon polymerization, and likely increased the strength in interchain/intrachain non-covalent interactions over the nickel center and the acrylic domains. The study also showed that incorporation of the monomer into the acrylic polymer backbone opened the possibility for the nickel binding site to gain access to host:guest stoichiometric discrimination, switching from 1 : 1 (major) and 1 : 2 (minor) both coexisting for the host when in the free form, to mostly 1 : 2 when in the polymerized version.

Compacted Multiparticulate Systems for Colon-Specific Delivery of Ketoprofen.

Pellet-containing tablets for colon-specific drug delivery present higher targeting efficiency and lower costs when compared with monolithic tablets and pellet-filled capsules, respectively. In this study, pellets containing ketoprofen were coated with different acrylic polymers and submitted to compaction. The influence of formulation and process factors on film integrity was then evaluated. Pellets were prepared via extrusion-spheronization and coated using two acrylic polymers (Eudragit® FS 30 D and Opadry® 94 k28327, PMMA and PMA, respectively). The resulting pellets were mixed with placebo granules and compressed in a hydraulic press. Multiple regression showed that ketoprofen release from pellet-containing tablets is predominantly influenced by pellet content, hardness, friability, and disintegration time. PMA-containing tablets prepared under low compaction force or with low pellet content showed rapid disintegration (<1 min) and ketoprofen release similar to those of uncompressed coated pellets (∼30% at 360 min of experiment). On the other hand, PMMA-containing tablets showed a higher rupture level, and those prepared with higher pellet content gave rise to a non-disintegrating matrix. Coated pellets were shown to be able to target ketoprofen to the colonic region. Targeting capacity was dependent on the physicochemical characteristics of the tablets.

Extended release promethazine HCl using acrylic polymers by freeze-drying and spray-drying techniques: formulation considerations / Liberação prolongada prometazina HCl utilizando polímeros acrílicos por liofilização e técnicas de secagem por aspersão: consideração de formulação

The present study investigated a novel extended release system of promethazine hydrochloride (PHC) with acrylic polymers Eudragit RL100 and Eudragit S100 in different weight ratios (1:1 and 1: 5), and in combination (0.5+1.5), using freeze-drying and spray-drying techniques. Solid dispersions were characterized by Fourier-transformed infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), Powder X-ray diffractometry (PXRD), Nuclear magnetic resonance (NMR), Scanning electron microscopy (SEM), as well as solubility and in vitro dissolution studies in 0.1 N HCl (pH 1.2), double-distilled water and phosphate buffer (pH 7.4). Adsorption tests from drug solution to solid polymers were also performed. A selected solid dispersion system was developed into capsule dosage form and evaluated for in vitro dissolution studies. The progressive disappearance of drug peaks in thermotropic profiles of spray-dried dispersions were related to increasing amount of polymers, while SEM studies suggested homogenous dispersion of drug in polymer. Eudragit RL100 had a greater adsorptive capacity than Eudragit S100, and thus its combination in (0.5+1.5) for S100 and RL 100 exhibited a higher dissolution rate with 97.14 percent drug release for twelve hours. Among different formulations, capsules prepared by combination of acrylic polymers using spray-drying (1:0.5 + 1.5) displayed extended release of drug for twelve hours with 96.87 percent release followed by zero order kinetics (r²= 0.9986).

O presente trabalho compreendeu estudo de um novo sistema de liberação prolongada de cloridrato de prometazina (PHC) com polímeros acrílicos Eudragit RL100 e Eudragit S100 em diferentes proporções em massa (1:1 e 1:5) e em combinação (0,5+1,5), utilizando técnicas de liofilização e de secagem por aspersão As dispersões sólidas foram caracterizadas por espectrofotometria no infravermelho por transformada de Fourier (FT-IR), calorimetria diferencial de varredura (DSC), difratometria de raios X (PXRD), Ressonância Magnética Nuclear (RMN), microscopia eletrônica de varredura (SEM) e, também, por estudos de solubilidade e de dissolução in vitro em HCl 0,1 N (pH 1,2), água bidestilada e tampão fosfato (pH 7,4). Realizaram-se, também, testes de adsorção da solução do fármaco nos polímeros sólidos. Desenvolveu-se sistema de dispersão sólida exclusiva dentro das cápsulas, que foi avaliado por meio de estudos de dissolução in vitro. Relacionou-se o desaparecimento progressivo de picos do fármaco em perfis termotrópicos de dispersões secas por spray à quantidade aumentada de polímero, enquanto os estudos de SEM sugeriram dispersão homogênea do fármaco no polímero. O Eudragit RL100 apresentou maior capacidade de adsorção do que o Eudragit S100 e, dessa forma, a combinação de (0,5+1,5) para S100 e para RL100 mostrou taxa de dissolução maior, com liberação de 94,17 por cento de fármaco em 12 horas. Entre as várias formulações, as cápsulas preparadas pela combinação de polímeros acrílicos utilizando secagem por aspersão (0,5+1,5) apresentou liberação prolongada do fármaco em 12 horas, com 96,78 por cento de liberação, seguindo cinética de ordem zero (r² = 0,9986).