Vat Photopolymerization of Ceramic Parts: Effects of Carbon Fiber Additives on Microstructure and Mechanical Performance.

Vat photopolymerization (VPP), as an additive manufacturing (AM) technology, can conveniently produce ceramic parts with high resolution and excellent surface quality. However, due to the inherent brittleness and low toughness of ceramic materials, manufacturing defect-free ceramic parts remains a challenge. Many researchers have attempted to use carbon fibers as additives to enhance the performance of ceramic parts, but these methods are mostly applied in processes like fused deposition modeling and hot pressing. To date, no one has applied them to VPP-based AM technology. This is mainly because the black carbon fibers reduce laser penetration, making it difficult to cure the ceramic slurry and thus challenging to produce qualified ceramic parts. To address this issue, our study has strictly controlled the amount of carbon fibers by incorporating trace amounts of carbon fiber powder into the original ceramic slurry with the aim to investigate the impact of these additions on the performance of ceramic parts. In this study, ceramic slurries with three different carbon fiber contents (0 wt.%, 0.1 wt.%, 0.2 wt.%, and 0.3 wt.%) were used for additive manufacturing. A detailed comparative analysis of the microstructure, physical properties, and mechanical performance of the parts was conducted. The experimental results indicate that the 3D-printed alumina parts with added carbon fibers show varying degrees of improvement in multiple performance parameters. Notably, the samples prepared with 0.2 wt.% carbon fiber content exhibited the most significant performance enhancements.

Assessment of the feed additive consisting of endo-1,4-beta-xylanase (produced with Trichoderma reesei MUCL 49755) and endo-1,3(4)-beta-glucanase (produced with T. reesei MUCL 49754) (AveMix® XG 10) for weaned piglets for the renewal of its authorisation and for its extension of use to suckling piglets (AVEVE BV).

Following a request from the European Commission, EFSA was asked to deliver a scientific opinion on the safety and efficacy of the feed additive consisting of endo-1,4-beta-xylanase (produced with Trichoderma reesei MUCL 49755) and endo-1,3(4)-beta-glucanase (produced with T. reesei MUCL 49754) (AveMix® XG 10/AveMix® XG 10 L) as a zootechnical feed additive for weaned and suckling piglets. The additive is already authorised for use in weaned piglets. This scientific opinion concerns the request for the renewal of the authorisation of the additive for weaned piglets and the extension of use to suckling piglets. The applicant declared a change in the carrier material used in AveMix® XG 10 from soybean meal to calcium carbonate + wheat flour or calcium carbonate + sepiolite. The applicant provided evidence that the additive AveMix® XG 10 with calcium carbonate + wheat flour and AveMix® XG 10 L comply with the conditions of the authorisation. The EFSA Panel on Additives and Products or Substances used in Animal FEED (FEEDAP) noted that no data were submitted to support compliance of the formulation of AveMix® XG 10 with calcium carbonate + sepiolite with the conditions of the authorisation. The FEEDAP Panel concluded that both formulations of the additive (powder and liquid) remain safe for the target species, consumers and the environment, and that the extension of use to suckling piglets would not affect these conclusions. AveMix® XG 10 formulated with calcium carbonate + sepiolite and AveMix® XG 10 L are not irritant to skin and eyes. No conclusions on the irritation potential of AveMix® XG 10 formulated with calcium carbonate + wheat flour could be drawn. The additive in all its formulations is considered a respiratory and skin sensitiser. There was no need for assessing the efficacy of the additive in the context of the renewal of the authorisation for weaned piglets. The Panel concluded that the additive is efficacious in suckling piglets at 4000 XU and 900 BGU/kg complete feed.

Assessment of the feed additive consisting of endo-1,4-beta-xylanase (produced with Trichoderma reesei MUCL 49755), endo-1,3(4)-beta-glucanase (produced with T. reesei MUCL 49754) and polygalacturonase (produced with Aspergillus fijiensis CBS 589.94) (AveMix® 02 CS) for weaned piglets for the renewal of its authorisation and for its extension of use to suckling piglets (AVEVE BV).

Following a request from the European Commission, EFSA was asked to deliver a scientific opinion on the safety and efficacy of the feed additive consisting of endo-1,4-beta-xylanase (produced with Trichoderma reesei MUCL 49755), endo-1,3(4)-beta-glucanase (produced with T. reesei MUCL 49754) and polygalacturonase (produced with Aspergillus fijiensis CBS 589.94) (AveMix® 02 CS/ AveMix® 02 CS L) as a zootechnical feed additive for weaned and suckling piglets. The additive is already authorised for use with weaned piglets. This scientific opinion concerns the request for the renewal of the authorisation of the additive for weaned piglets and the extension of use to suckling piglets. The applicant provided evidence that the additive currently in the market complies with the conditions of the authorisation. There was no new evidence that would lead the Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) to reconsider its previous conclusions that the additive is safe for weaned piglets, the consumer and the environment under the authorised conditions of use. This conclusion applied also to the new target species (suckling piglets) for which a request for an extension of use was made. The additive in both formulations (powder and liquid) is not irritant to skin or eyes but should be considered a dermal and respiratory sensitiser. There was no need for assessing the efficacy of the additive in the context of the renewal of the authorisation for weaned piglets. The Panel concluded that the additive is efficacious in suckling piglets at 2140 XU, 1230 BGU and 46 PGLU/kg complete feed.

The efficiency of mycotoxin binding by sorbents in the in vitro model using a naturally contaminated animal feed.

Introduction: The productivity of domestic animals and the safety of food products derived from them are jeopardised by mycotoxins in animal feed. To control them, feed additives are used, which limit the absorption of mycotoxins in the gastrointestinal tract of animals by binding to them. The study aimed to evaluate the effectiveness of a new in vitro model in experiments on the binding of mycotoxins from buffers and contaminated feed and to confirm the effect of a single sorbent or mixture in binding them. Material and Methods: Nine mineral sorbents were tested for their efficiency binding eight mycotoxins. Two in vitro experiments were conducted to indicate the mycotoxin-binding capacity of sorbents, each specifying a buffer with one of two different pH levels reflecting gastrointestinal conditions (pH 3.5 and 7.0). The first investigated the sorbent with only the buffer and mycotoxin standards, while the second did so with the sorbent, buffer and feed naturally contaminated with mycotoxins (deoxynivalenol, zearalenone, and ochratoxin A). Results: The sorption was significantly lower in the trial with feed. In the first experiment at gastric pH (pH 3.5), activated charcoal bound deoxynivalenol and sepiolite bound zearalenone at 70% and 96%, respectively, whereas in the second experiment with feed, the binding was only 3% and 6%. Conclusion: The study underlines the challenge of finding a feed additive that would work comprehensively, binding all mycotoxins regulated by law.

Intensification of valorization of cooked rice water through energy-efficient synthesis of drop-in biofuel (butyl levulinate): engine performance, emission profile, and environmental impact assessments.

For the first time, an energy-efficient and eco-friendly technology for the conversion of abundantly available kitchen waste, specifically waste cooked rice water (WCRW) to drop-in- biofuels, namely, butyl levulinate (BL), has been explored. The synthesis of BL was accomplished employing butyl alcohol (BA) and WCRW in an energy-efficient UV (5W each UVA and UVB)-near-infrared (100W) irradiation assisted spinning (120 rpm) batch reactor (UVNIRSR) in the presence of TiO2-Amberlyst 15 (TA15) photo-acidic catalyst system (PACS). The optimal 95.81% yield of BL (YBL) could be achieved at 10 wt% catalyst concentration, 60 °C reaction temperature, 80 min time, and 1:10 WCRW: BA concentration as per Taguchi statistical design. Moreover, additional combination of different PACS such as TiO2-Amberlyst 16, TiO2-Amberlyst 36, and TiO2-Amberlite IRC120 H rendered 86.72% YBL, 90.04% YBL, and 93.47% YBL, respectively, proving superior efficacy compared to individual activity of the acidic catalysts and photocatalysts. The heterogeneous reaction kinetics study for TA15 PACS suggested Langmuir-Hinshelwood model to be the best fitted model. A significant 63.33% energy could be saved by UVNIRSR as compared to conventional heated reactor at the optimized experimental condition using PACS TA15. An overall alleviation in environmental pollution with 59.259% reduction in GWP, 15.254% decline in terrestrial ecotoxicity, 18.238% diminution in marine ecotoxicity, 17.25% decrease in ozone formation affecting human health, 5.865% reduction in human non-carcinogenic toxicity, 18.65% diminution in ozone formation affecting terrestrial ecosystem, 55.17% significant decrease in terrestrial acidification, and 25.619% mitigation in fresh water ecotoxicity could be observed. Furthermore, BL-biodiesel-diesel blends (3% BL, 7% biodiesel, and 90% diesel) exhibited significant reduction (25.45% and 36%, respectively, for CO and HC) in harmful engine exhaust emissions demonstrating environmental sustainability of the overall process.

Food safety control in poultry industry: prevalence and antimicrobial susceptibility of Escherichia coli isolated from raw chicken and the potential use of Origanum essential oils as alternative to antibiotics.

1. The extensive use of antimicrobials in poultry production may contribute to the emergence of resistant bacteria. This study was conducted to determine the prevalence and resistance of different E. coli strains isolated from raw chicken meat and to investigate the possibility to use Lebanese native oregano essential oils as alternatives.2. In total, 250 chickens from Lebanese markets were examined for the presence of E. coli. Isolates were then screened for susceptibility using 19 antibiotics and two essential oils extracted from oregano plants.3. Of the 250 chickens tested, 80% were contaminated with E. coli. Main resistance was seen against amoxycillin, ampicillin, penicillin, tetracycline, tylosin, streptomycin and erythromycin. The highest rate of sensitivity was found in 86.1% of strains to Amoxycillin/Clavulanic acid, 80.09% to Tilmicosin. Both essential oils from Origanum syriacum (98%) and O. ehrenbergii (97.3%) showed promising potential in inhibiting the growth of the tested bacteria. Oil from O. syriacum exhibited superior efficacy against 200 E. coli strains, inhibiting 46.1% at 200 mg/l and all at 400 mg/l, while O. ehrenbergii oil showed slightly lower inhibition, affecting 41.6% at 200 mg/l and all at 400 mg/l.

Development of a supramolecular solvent-based extraction method for application to quantitative analyses of a wide range of organic contaminants in indoor dust.

This study investigates the efficacy of supramolecular solvent (SUPRAS) in extracting a diverse spectrum of organic contaminants from indoor dust. Initially, seven distinct SUPRAS were assessed across nine categories of contaminants to identify the most effective one. A SUPRAS comprising Milli-Q water, tetrahydrofuran, and hexanol in a 70:20:10 ratio, respectively, demonstrated the best extraction performance and was employed for testing a wider array of organic contaminants. Furthermore, we applied the selected SUPRAS for the extraction of organic compounds from the NIST Standard Reference Material (SRM) 2585. In parallel, we performed the extraction of NIST SRM 2585 with conventional extraction methods using hexane:acetone (1:1) for non-polar contaminants and methanol (100%) extraction for polar contaminants. Analysis from two independent laboratories (in Norway and the Czech Republic) demonstrated the viability of SUPRAS for the simultaneous extraction of twelve groups of organic contaminants with a broad range of physico-chemical properties including plastic additives, pesticides, and combustion by-products. However, caution is advised when employing SUPRAS for highly polar contaminants like current-use pesticides or volatile substances like naphthalene.

Safety and efficacy of a feed additive consisting of Quillaja saponaria Molina and Yucca schidigera Roezl ex Ortgies (Magni-PHI®) for all poultry species (to slaughter age/weight, or to the point of lay) and ornamental birds (Phibro Animal Health Corporation).

Following a request from the European Commission, EFSA was asked to deliver a scientific opinion on the safety and efficacy of a feed additive consisting of Quillaja saponaria powder and Yucca schidigera powder (Magni-Phi®) for all avian species (to slaughter age/weight, or to the point of lay) and ornamental birds, as a zootechnical additive (digestibility enhancer and other zootechnical additives). The EFSA Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) concluded that the additive is safe for chickens for fattening at the level of 250 mg/kg complete feed with a margin of safety of 20 assuming that the additive contains 3.58% of saponins. This conclusion was extrapolated to all growing poultry species and ornamental birds. The Panel concluded that the use of the feed additive in animal nutrition at 250 mg/kg complete feed is of no concern for the safety for the consumer and the environment. The Panel also concluded that the additive is not irritant to skin, but irritant to the eyes and to the respiratory system. Due to the lack of data, the FEEDAP Panel could not conclude on the skin sensitisation potential of the additive. The FEEDAP Panel was not in the position to conclude on the efficacy of the additive for all poultry species and ornamental birds.

Assessment of the feed additive consisting of l-tyrosine for all animal species for the renewal of its authorisation (BCF Life Sciences).

Following a request from the European Commission, EFSA was asked to deliver a scientific opinion on the assessment of the application for the renewal of the authorisation of l-tyrosine as a nutritional feed additive. The additive is authorised for use in all animal species (3c401). The applicant has provided evidence that the additive currently in the market complies with the existing conditions of authorisation. The EFSA Panel on Additives and Products or Substances used in Animal Feed concluded that the use of the feed additive in animal nutrition remains safe for the target species, consumers, and the environment. As regards the safety for the user, l-tyrosine is not an irritant to skin or eyes. In the absence of data, the potential of l-tyrosine to be a dermal and respiratory sensitiser cannot be excluded. Exposure by inhalation of persons handling the additive is likely. The present application for renewal of the authorisation does not include any modification proposal that would have an impact on the efficacy of the additive and, therefore, there is no need for re-assessing the efficacy.

Safety and efficacy of a feed additive consisting of sodium ferrocyanide and potassium ferrocyanide for all animal species (Eusalt a.i.s.b.l.).

Following a request from the European Commission, EFSA was asked to deliver a scientific opinion on the safety and efficacy of sodium ferrocyanide and potassium ferrocyanide as technological feed additives for all animal species. In its previous opinion on the safety and efficacy of the additives, the FEEDAP Panel concluded that the use of sodium ferrocyanide and potassium ferrocyanide is safe, when added to sodium chloride at a maximum content of 80 mg ferrocyanide anions (anhydrous)/kg for turkeys for fattening and laying hens and other laying/breeding birds, all porcine species and categories, all ruminant species and categories, rabbits, horses, salmonids and other minor fin fish, dogs and cats. However, the Panel could not conclude on the safety of the additives for chickens for fattening and other poultry species for fattening or reared for laying/breeding other than turkeys, and for all species/categories other than the above listed. In the current assessment, the applicant is proposing a maximum content of 60 mg ferrocyanide anions (anhydrous)/kg sodium chloride for chickens for fattening and other poultry species (except turkeys) for fattening or reared for laying/breeding and for all species/categories other than the listed above. The FEEDAP Panel concluded that sodium ferrocyanide and potassium ferrocyanide are safe at a maximum content of 80 mg ferrocyanide anions (anhydrous)/kg sodium chloride for: turkeys for fattening and reared for breeding, laying hens and other laying/breeding birds, all porcine species, all ruminant species, rabbits, equines, salmonids and minor fin fish, dogs and cats. The Panel concluded also that a maximum content of 60 mg ferrocyanide anions (anhydrous)/kg sodium chloride is safe for chickens for fattening and minor poultry species for fattening or reared for laying/breeding and all other animal species.

Optimizing Double-Fibril Network Morphology via Solid Additive Strategy Enables Binary All-Polymer Solar Cells with 19.50% Efficiency.

Double-fibril network morphology (DFNM), in which the donor and the acceptor can self-assemble into a double-fibril structure, is beneficial for exciton dissociation and charge transport in organic solar cells. Herein, it is demonstrated that such DFNM can be constructed and optimized in all-polymer solar cells (all-PSCs) with the assistance of 2-alkoxynaphthalene volatile solid additives. It is revealed that the incorporation of 2-alkoxynaphthalene can induce a stepwise regulation in the aggregation of donor and acceptor molecules during film casting and thermal annealing processes. Through altering the alkoxy of 2-alkoxynaphthalene solid additives, both the intermolecular interactions and molecular miscibility with the host materials can be precisely tuned, which allows for the optimization of the molecular aggregation process and facilitation of molecular self-assembly, and thus leading to reinforced molecular packing and optimized DFNM. As a result, an unprecedented efficiency of 19.50% (certified as 19.1%) is obtained for 2-ethoxynaphthalene-processed PM6:PY-DT-X all-PSCs with excellent photostability (T80 = 1750 h). This work reveals that the optimization of DFNM via solid additive strategy is a promising avenue to boosting the performance of all-PSCs.

Maleic Anhydride and (Ethoxy)pentafluorocyclotriphosphazene as Electrolyte Additives for High-Voltage LiCoO2/Si-Graphite Lithium-Ion Batteries.

Anhydride additives including maleic anhydride and succinic anhydride are initially selected as additives in the commercial electrolytes for high-voltage lithium-ion batteries with a Si-based anode. The introduction of (ethoxy)pentafluorocyclotriphosphazene as a flame retardant realizes the nonflammability of electrolytes, and the conductivity of electrolytes exceeds 10 mS cm-1 at 25 °C. Maleic anhydride and (ethoxy)pentafluorocyclotriphosphazene jointly contribute to the exceptional performances of 4.45 V LiCoO2/Si-graphite pouch cells at 25 °C. The capacity retention at 1C of 300 cycles reaches 78%, and the discharge capacity ratio of 6C/1C is approximately 83%. These results suggest that this nonflammable electrolyte has good application prospect. Scanning electron microscopy and X-ray photoelectron spectroscopy measurements are implemented to analyze the interface properties of electrodes.

Fluorinated Fullerenes as Electrolyte Additives for High Ionic Conductivity Lithium-Ion Batteries.

Currently, lithium-ion batteries have an increasingly urgent need for high-performance electrolytes, and additives are highly valued for their convenience and cost-effectiveness features. In this work, the feasibilities of fullerenes and fluorinated fullerenes as typical bis(fluorosulfonyl)imide/1,2-dimethoxymethane (LiFSI/DME) electrolyte additives are rationally evaluated based on density functional theory calculations and molecular dynamic simulations. Interestingly, electronic structures of C60, C60F2, C60F4, C60F6, 1-C60F8, and 2-C60F8 are found to be compatible with the properties required as additives. It is noted that that different numbers and positions of F atoms lead to changes in the deformation and electronic properties of fullerenes. The F atoms not only show strong covalent interactions with C cages, but also affect the C-C covalent interaction in C cages. In addition, molecular dynamic simulations unravel that the addition of trace amounts of C60F4, C60F6, and 2-C60F8 can effectively enhance the Li+ mobility in LiFSI/DME electrolytes. The results expand the range of applications for fullerenes and their derivatives and shed light on the research into novel additives for high-performance electrolytes.

A comprehensive review of the application of Zr-based metal-organic frameworks for electrochemical sensors and biosensors.

A family of inorganic-organic hybrid crystalline materials made up of organic ligands and metal cations or clusters is known as metal-organic frameworks (MOFs). Because of their unique stability, intriguing characteristics, and structural diversity, zirconium-based MOFs (Zr-MOFs) are regarded as one of the most interesting families of MOF materials for real-world applications. Zr-MOFs that have the ligands, metal nodes, and guest molecules enclosed show distinct electrochemical reactions. They can successfully and sensitively identify a wide range of substances, which is important for both environmental preservation and human health. The rational design and synthesis of Zr-MOF electrochemical sensors and biosensors, as well as their applications in the detection of drugs, biomarkers, pesticides, food additives, hydrogen peroxide, and other materials, are the main topics of this comprehensive review. We also touch on the current issues and potential future paths for Zr-MOF electrochemical sensor research.

Insight into the Manipulation Mechanism of Polymorphic Transformation by Polymers: A Case of Cimetidine.

PURPOSE: Employing polymer additives is an effective strategy to realize the manipulation of polymorphic transformation. However, the manipulation mechanism is still not clear, which limit the precise selection of polymeric excipients and the development of pharmaceutical formulations. METHODS: The solubility of cimetidine (CIM) in acetonitrile/water mixtures were measured. And the polymorphic transformation from CIM form A to form B with the addition of different polymers was monitored by Raman spectroscopy. Furthermore, the manipulation effect of polymers was determined based on the results of experiments and molecular simulations. RESULTS: The solubility of form A is consistently higher than that of form B, which indicate that form B is the thermodynamically stable form within the examined temperature range. The presence of polyvinylpyrrolidone (PVP) of a shorter chain length could have a stronger inhibitory effect on the phase transformation process of metastable form, whereas polyethylene glycol (PEG) had almost no impact. The nucleation kinetics experiments and molecular dynamic simulation results showed that only PVP molecules could significantly decrease the nucleation rate of CIM, due to the ability of reducing solute molecular diffusion and solute-solute molecular interaction. A combination of crystal growth rate measurements and calculations of the interaction energies between PVP and the crystal faces of CIM indicate that smaller molecular weight PVP can suppress crystal growth more effectively. CONCLUSION: PVP K16-18 has more impact on the stabilization of CIM form A and inhibition of the phase transformation process. The manipulation mechanism of polymer additives in the polymorphic transformation of CIM was proposed.

Revealing the Limitation Induced by Hydroxyl in Regulating Solvation Structure of Zn2+ and Overcoming Challenges with Hybrid Additives towards Highly Stable Zinc Anodes.

In the field of electrolyte design for aqueous zinc-ion batteries (AZIBs), additives containing hydroxyl have been demonstrated to effectively modulate the solvation structure of Zn2+. However, reported studies typically focus solely on the effectiveness of hydroxyl while neglecting the issues that emerge during solvation structure regulation. The strong electron-attracting capability of Zn2+ attracts electrons from the oxygen in hydroxyl, thereby weakening the strength of hydroxyl, the hydrogen evolution reaction (HER) is also pronounced. This work innovatively reveals the limitation of hydroxyl-containing additives and proposes a synergistic regulation strategy based on hybrid additives. Arginine with a high isoelectric point is introduced into the electrolyte system containing hydroxyl additives. The protonation effect and electrostatic attraction of arginine enable it to absorb protons at the anode released by the weakened hydroxyl, thereby compensating for the limitation of hydroxyl additives. Under the synergistic action of hybrid additives, the Zn|Zn battery achieved stable deposition/stripping for over 1200 hours under 10 mA cm-2 and 10 mAh cm-2. Moreover, the Zn|Cu battery cycled for over 570 hours with a high Coulombic efficiency of 99.82%. This study presents a pioneering perspective for the further application of AZIBs.

Novel strategies for the determination of plastic additives derived from agricultural plastics in soil using ultrahigh-performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS).

Certain agricultural plastics, i.e., mulching films, are generally considered as potent sources of micro- and nanoplastics (MNPs), due to their direct application on soil and waste mishandling. During the synthesis and fabrication of such agricultural plastics, it is necessary to use chemicals, the so-called plastic additives (PAs), improving the physicochemical properties of the final polymeric product. However, since PAs are loosely bound on the polymer matrix, they can potentially leach into the soil environment with unidentified effects. Clearly, to monitor the fate of PAs in the terrestrial ecosystem, it is necessary to develop accurate, sensitive and robust analytical methods. To this end, a comprehensive analytical strategy was developed for monitoring 16 PAs with diverse physicochemical properties (partition coefficient; -3 < logP<19) in soil samples using ultra-high-performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS). For this purpose, two different extraction procedures were developed, namely, a single step ultrasound-assisted extraction (UAE) using ethyl acetate or an aqueous solution of methanol and a binary extraction, combining Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) and UAE principles with n-hexane as the extractant. Interestingly, within the sample preparation investigation, we identified in-lab contamination sources of PAs, e.g., centrifuge tubes or microfilters. Such consumables are made of plastic contaminating the procedural blanks and omitting their use was necessary to acquire satisfactory analytical performance. In detail, method validation was performed for 16 compounds achieving recoveries mainly in the range 70-120 %, repeatability (expressed as relative standard deviation, RSD %) < 20 % and limits of quantification (LOQs) ranging between 0.2 and 20 ng/g dry weight (dw). Importantly, the presented strategies are added to the very limited available for PA determination in soil, a topical issue with a significant and rather understudied impact on agriculture.

Improving the Oxygen Evolution Reaction Kinetics in Zn-Air Battery by Iodide Oxidation Reaction.

Zinc-air batteries (ZABs) have garnered considerable attention as a highly promising contender in the field of energy storage and conversion. Nevertheless, their performance is considerably impeded by the proliferation of dendrites on the Zinc anode and the slow kinetics of the redox reaction on the air cathode. Herein, taking Ag30%@LaCoO3 (Ag30%@LCO) heterojunction catalyst as the cathode, it is demonstrated that adding KI additives to the alkaline electrolyte can not only enhance the oxygen electrocatalytic reaction but also inhibit the formation of zinc anode dendrites, thereby achieving a comprehensive improvement in the performance of ZABs. Under the action of the KI additive, the optimized Ag30%@LCO catalyst shows a decreased overpotential from 460 to 220 mV at j = 10 mA cm-2, while the assembled ZAB shows reduced charging potential (1.8 V), and long cycle stability (180 h). Furthermore, the morphology characterization results indicate a reduction in dendrites on the Zn anode. Both experimental and calculated results indicate that the presence of I- as a reaction modifier alters the trajectory of the conventional oxygen evolution reaction, resulting in a more thermodynamically favorable pathway. The introduction of KI additives as electrolytes provides a straightforward approach to developing comprehensively improved ZABs.

Evaluation of nutritional, technological, oxidative, and sensory properties of low-sodium and phosphate-free mortadellas produced with bamboo fiber, pea protein, and mushroom powder.

This study examined the effects of replacing alkaline phosphate (AP) with bamboo fiber (BF), isolated pea protein (PP), and mushroom powder (MP) on the nutritional, technological, oxidative, and sensory characteristics of low-sodium mortadellas. Results indicated that this reformulation maintained the nutritional quality of the products. Natural substitutes were more effective than AP in reducing water and fat exudation. This led to decreased texture profile analysis (TPA) values such as hardness, cohesiveness, gumminess, and chewiness. The reformulation reduced the L* values and increased the b* values, leading to color modifications rated from noticeable to appreciable according to the National Bureau of Standards (NBS) index. Despite minor changes in oxidative stability indicated by increased values in TBARS (from 0.19 to 0.33 mg MDA/kg), carbonyls (from 2.1 to 4.4 nmol carbonyl/mg protein), and the volatile compound profile, the sensory profile revealed a beneficial increase in salty taste, especially due to the inclusion of MP, which was enhanced by the synergy with BF and PP. In summary, the results confirmed the potential of natural alternatives to replace chemical additives in meat products. Incorporating natural antioxidants into future formulations could address the minor oxidation issues observed and enhance the applicability of this reformulation strategy.

Response of humification process to fungal inoculant in corn straw composting with two different kinds of nitrogen sources.

Inoculation is widely used in composting to improve the mineralization process, however, the link of fungal inoculant to humification is rarely proposed. The objective of this study was to investigate the effect of compound fungal inoculation on humification process and fungal community dynamics in corn straw composting with two different kinds of nitrogen sources [pig manure (PM) and urea (UR)]. Structural equation modeling and random forest analysis were conducted to identify key fungi and explore the fungi-mediated humification mechanism. Results showed that fungal inoculation increased the content of humic acids in PM and UR by 71.76 % and 53.01 % compared to control, respectively. High-throughput sequencing indicated that there were more key fungal genera for lignin degradation in PM especially in the later stage of composting, but a more complex fungal (genera) connections with lower humification degree was found in UR. Network analysis and random forest suggested that inoculation promoted dominant genus such as Coprinus, affecting lignocellulose degradation. Structural equation modeling indicated that fungal inoculation could promote humification by direct pathway based on lignin degradation and indirect pathway based on stimulating the indigenous microbes such as Scedosporiu and Coprinus for the accumulation of carboxyl and polyphenol hydroxyl groups. In summary, fungal inoculation is suitable to be used combining with complex nitrogen source such as pig manure in straw composting.