Proposing an Affordable Plasma Device for Polymer Surface Modification and Microbial Inactivation.

This study proposes an affordable plasma device that utilizes a parallel-plate dielectric barrier discharge geometry with a metallic mesh electrode, featuring a straightforward 3D-printed design. Powered by a high-voltage supply adapted from a cosmetic plasma device, it operates on atmospheric air, eliminating the need for gas flux. Surface modification of polyethylene treated with this device was characterized and showed that the elemental composition after 15 min of plasma treatment decreased the amount of C to ~80 at% due to the insertion of O (~15 at%). Tested against Candida albicans and Staphylococcus aureus, the device achieved a reduction of over 99% in microbial load with exposure times ranging from 1 to 10 min. Simultaneously, the Vero cell viability remained consistently high, namely between 91% and 96% across exposure times. These results highlight this device's potential for the surface modification of materials and various infection-related applications, boasting affordability and facilitating effective antimicrobial interventions.

Atmospheric Plasma Treatment to Improve PHB Coatings on 316L Stainless Steel.

In the present study, biopolymeric coatings of polyhydroxybutyrate (PHB) were deposited on 316L stainless steel substrates. The PHB coatings were developed using the spin coating method. To improve the adhesion of the PHB coating on the substrate, this method uses an atmospheric plasma treatment. Adhesion tests show a 156% increase in adhesion after 5 s of surface treatment. Raman spectroscopy analysis of the polymer shows the incorporation of functional groups and the formation of new hydrogen bonds, which can help us bind drugs and promote osteogenesis after plasma treatment. Additionally, the electrochemical behaviors in artificial body fluids (Hanks' solution) of the PHB coatings on the steel were evaluated with potentiodynamic tests, which revealed a decrease in the corrosion current and resistance to the transfer of the charge from the electrolyte to the 316L steel because of the PHB coating. All the PHB coatings were characterized using scanning electron microscopy and Raman spectroscopy after the electrochemical tests. This analysis confirmed the diffusion of electrolyte species toward the surface and the degradation of the polymer chain for the first 15 s of treatment with atmospheric plasma. These findings support the claim that plasma surface modification is a quick, environmentally friendly, and cost-effective method to enhance the performance of PHB coatings on 316L stainless steel for medical devices.

Analysis of inflammation and bone remodeling of atmospheric plasma therapy in experimental periodontitis.

BACKGROUND AND OBJECTIVE: The biological effects of atmospheric plasma (cold plasma) show its applicability for controlling the etiological factors that involve tissue repair. Thus, the study evaluated the effect of atmospheric plasma therapy in the control of tissue inflammation and bone remodeling in experimental periodontitis. METHODS: Fifty-six rats were subjected to ligation in the cervical region of the first maxillary molars (8 weeks). The animals were divided into two groups (n = 28): periodontitis without treatment group (P group), and periodontitis with atmospheric plasma treatment group (P + AP group). Tissue samples were collected at 2 and 4 weeks after treatment to analyze the inflammation and bone remodeling by biochemical, histomorphometric, and immunohistochemical analyses. RESULTS: Inflammatory infiltration in the gingival and periodontal ligament was lower in the P + AP group than in the P group (p < .05). The MPO and NAG levels were higher in the P + AP group compared to P group (p < .05). At 4 weeks, the TNF-α level was lower and the IL-10 level was higher in the P + AP group compared to P group (p < .05). In the P + AP group, the IL-1ß level increased in the second week and decreased in the fourth week (p < .05), the number of blood vessels was high in the gingival and periodontal ligament in the second and fourth week (p < .05); and the number of fibroblasts in the gingival tissue was low in the fourth week, and higher in the periodontal tissue in both period (p < .05). Regarding bone remodeling, the RANK and RANKL levels decreased in the P + AP group (p < .05). The OPG level did not differ between the P and P + AP groups (p > .05), but decreased from the second to the fourth experimental week in P + AP group (p < .05). CONCLUSIONS: The treatment of experimental periodontitis with atmospheric plasma for 4 weeks modulated the inflammatory response to favor the repair process and decreased the bone resorption biomarkers, indicating a better control of bone remodeling in periodontal disease.

Survival of Listeria Strains and Shelf Life Determination of Fresh Blueberries (Vaccinium corymbosum) Treated with Cold Atmospheric Plasma.

Fresh blueberries are delicate, hand-picked, packaged, and refrigerated fruits vulnerable to spoilage and contamination. Cold atmospheric plasma (CAP) is a promising antimicrobial technology; therefore, this study evaluated the CAP treatment effect on acid-tolerant Listeria innocua and Listeria monocytogenes and evaluated changes in the quality of the treated fruit. Samples were spot-inoculated with pH 5.5 and 6.0 acid-adapted Listeria species. Samples were treated with gliding arc CAP for 15, 30, 45, and 60 s and evaluated after 0, 1, 4, 7, and 11 days of storage at 4 °C and 90% humidity for the following quality parameters: total aerobic counts, yeast and molds, texture, color, soluble solids, pH, and titratable acidity. CAP treatments of 30 s and over demonstrated significant reductions in pathogens under both the resistant strain and pH conditions. Sixty-second CAP achieved a 0.54 Log CFU g-1 reduction in L. monocytogenes (pH 5.5) and 0.28 Log CFU g-1 for L. monocytogenes (pH 6.0). Yeast and mold counts on day 0 showed statistically significant reductions after 30, 45, and 60 s CAP with an average 2.34 Log CFU g-1 reduction when compared to non-CAP treated samples. Quality parameters did not show major significant differences among CAP treatments during shelf life. CAP is an effective antimicrobial treatment that does not significantly affect fruit quality.

Aplicação de líquidos ativados com plasma frio na endodontia / Application of plasma-activated liquids in endodontics

O insucesso do tratamento endodôntico é decorrente principalmente da presença de microrganismos remanescentes no canal radicular decorrente da dificuldade de remoção de biofilmes e das limitações dos irrigantes convencionais. Por este motivo, há necessidade de novas alternativas para a desinfecção intracanal. O objetivo deste estudo foi avaliar a atividade inibitória de líquidos ativados por plasma frio sobre biofilmes de interesse endodôntico, além de caracterizar as condições para obtenção do líquido ativado e analisar a citotoxicidade dos líquidos. Biofilmes mono e dual espécies de 24 horas foram obtidos a partir de suspensões padronizadas de Candida albicans (ATCC 18804) e Enterococcus faecalis (ATCC 29212). Os biofilmes foram expostos aos líquidos ativados, sendo estes água destilada, solução fisiológica e água mineral. Foram incluídos grupos de líquidos não ativados (controles negativos) e grupo controle de crescimento. Após 24 horas, os biofilmes foram expostos ao tratamento por 2 períodos, 1 minuto e 1,5 minutos. O número de células remanescentes foi determinado após semeadura da suspensão microbiana resultante em meios de cultura seletivos. A citotoxicidade dos líquidos ativados frente às células 3T3 foi avaliada. O teste ex vivo foi realizado em canais radiculares de dentes humanos, no qual totalizou 54 dentes humanos unirradiculares que foram preparados, instrumentados e esterilizados para receberem tratamentos com água destilada ativada. Os dados foram analisados pelo software GraphPad Prism, versão 6.01. As comparações foram feitas utilizando testes de análise de variância (ANOVA One-way), seguidas do post-hoc de Tukey, adotando-se o nível de significância de 5%. A exposição dos líquidos ativados por plasma frio levou a reduções significativas (p<0.0001) em todos os grupos quando comparados ao grupo controle de crescimento e com os grupos dos líquidos não ativados, tanto para biofilmes mono e dual espécies. A Água destilada ativada levou à maior redução em relação aos demais líquidos e o tempo de tratamento mais efetivo foi de 1,5 minutos. Os líquidos ativados não foram citotóxicos para células 3T3. No teste ex vivo, a água destilada ativada levou à redução da viabilidade dos biofilmes em 80% a 91%. Conclui-se os líquidos ativadas com plasma frio apresentaram ação inibitória sobre biofilmes mono e dual espécies formados por C. albicans e E. faecalis, tanto em modelo in vitro quanto ex vivo, com ausência de toxicidade para células 3T3.(AU)

The failure of endodontic treatment is mainly due to the presence of remaining microorganisms in the root canal due to the difficulty in removing biofilms and the limitations of conventional irrigants. For this reason, there is a need for new alternatives for intracanal disinfection. The objective of this study was to evaluate the inhibitory effect of by cold plasma activated liquids on biofilms of endodontic interest, in addition to characterizing the conditions for obtaining the activated liquid and analyzing the cytotoxicity of the liquids. 24-hours mono- and dual-species biofilms were obtained from standardized suspensions of Candida albicans (ATCC 18804) and Enterococcus faecalis (ATCC 29212). The biofilms were exposed to the activated liquids, which were distilled water, saline solution and mineral water. Non-activated liquid groups (negative controls) and growth control group were included. After 24 hours, the biofilms were exposed to treatment for 2 periods, 1 minute and 1.5 minutes. The number of remaining cells was determined by plating method using selective culture media. The cytotoxicity of activated liquids on 3T3 cells was evaluated. The ex vivo assays were carried out in root canals of human teeth. A total of 54 single-rooted human teeth were prepared, instrumented and sterilized to receive treatments with activated distilled water. Data were analyzed using GraphPad Prism software, version 6.01. Comparisons were made using analysis of variance tests (One-way ANOVA), followed by Tukey's posthoc test, adopting a significance level of 5%. Significant reduction of cell viabilities (p<0.0001) in all groups were observed after exposure to plasma activated liquids when compared to the growth control group and the non-activated liquid groups, both for mono and dual species biofilms. Activated distilled water led to the greatest reduction compared to other liquids and the most effective treatment time was 1.5 minutes. The activated liquids were not cytotoxic to 3T3 cells. In the ex vivo assay, activated distilled water led to a reduction in biofilm viability from 80% to 91%. It is concluded that plasma activated liquids showed inhibitory action on mono and dual species biofilms formed by C. albicans and E. faecalis, both in in vitro and ex vivo models, with no toxicity for 3T3 cells (AU)

Helium Cold Atmospheric Plasma Causes Morphological and Biochemical Alterations in Candida albicans Cells.

(1) Background: Previous studies reported the promising inhibitory effect of cold atmospheric plasma (CAP) on Candida albicans. However, the exact mechanisms of CAP's action on the fungal cell are still poorly understood. This study aims to elucidate the CAP effect on C. albicans cell wall, by evaluating the alterations on its structure and biochemical composition; (2) Methods: C. albicans cells treated with Helium-CAP were analyzed by atomic force microscopy (AFM) and Fourier transform infrared spectroscopy (FTIR) in order to detect morphological, topographic and biochemical changes in the fungal cell wall. Cells treated with caspofungin were also analyzed for comparative purposes; (3) Results: Expressive morphological and topographic changes, such as increased roughness and shape modification, were observed in the cells after CAP exposure. The alterations detected were similar to those observed after the treatment with caspofungin. The main biochemical changes occurred in polysaccharides content, and an overall decrease in glucans and an increase in chitin synthesis were detected; (4) Conclusions: Helium-CAP caused morphological and topographic alterations in C. albicans cells and affected the cell wall polysaccharide content.

Study of a Conical Plasma Jet with a Cloth-Covered Nozzle for Polymer Treatment.

Although atmospheric pressure plasma jets (APPJs) have been widely employed for materials modification, they have some drawbacks, such as the small treatment area (couple of cm2). To overcome this limitation, a funnel-like APPJ with a wide exit has been proposed. In this work, a gas-permeable cotton cloth covered the nozzle of the device to improve the gas flow dynamics and increase its range of operation. The funnel jet was flushed with Ar, and the plasma was ignited in a wide range of gas flow rates and the gap distances between the exit nozzle and the sample holder. The device characterization included electric measurements and optical emission spectroscopy (OES). To evaluate the size of the treatment and the degree of surface modification, large samples of high-density polyethylene (PE) were exposed to plasma for 5 min. Afterward, the samples were analyzed via water contact angle WCA measurements, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). It was found that surface modification occurs simultaneously on the top and bottom faces of the samples. However, the treatment incorporated different functional groups on each side.

Plasma-Saline Water Interaction: A Systematic Review.

Plasma-liquid interaction research has developed substantially in recent years due, mostly, to the numerous applications of cold atmospheric plasma (CAP). Plasma-liquid interactions are influenced by the concentrations of the ionic species present in the liquid environment, and few studies have paid attention to saline water, which generally mediates the reactions in many plasma applications. Therefore, the present review aims to explore the main results and the influence of variables on the modification of properties of saline water by CAP sources following the guidelines of the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). The searches were carried out in the Scopus, Science Direct, and Web of Science databases, resulting in the inclusion of 37 studies. The main effects of the interaction between CAP and saline water are (i) the production of reactive oxygen and nitrogen species (RONS); (ii) the increase in conductivity and decrease in pH, directly proportional to the increase in discharge voltage; (iii) and the effective area of interaction and the shortest distance between electrode and solution. Other effects are the localized evaporation and crystallization of salts, which make the interaction between plasma and saline water a promising field in the development of technologies for desalination and improvement of liquid properties.

Applications of Plasma-Activated Water in Dentistry: A Review.

The activation of water by non-thermal plasma creates a liquid with active constituents referred to as plasma-activated water (PAW). Due to its active constituents, PAW may play an important role in different fields, such as agriculture, the food industry and healthcare. Plasma liquid technology has received attention in recent years due to its versatility and good potential, mainly focused on different health care purposes. This interest has extended to dentistry, since the use of a plasma-liquid technology could bring clinical advantages, compared to direct application of non-thermal atmospheric pressure plasmas (NTAPPs). The aim of this paper is to discuss the applicability of PAW in different areas of dentistry, according to the published literature about NTAPPs and plasma-liquid technology. The direct and indirect application of NTAPPs are presented in the introduction. Posteriorly, the main reactors for generating PAW and its active constituents with a role in biomedical applications are specified, followed by a section that discusses, in detail, the use of PAW as a tool for different oral diseases.

Physicochemical Studies on the Surface of Polyamide 6.6 Fabrics Functionalized by DBD Plasmas Operated at Atmospheric and Sub-Atmospheric Pressures.

This work proposes the use of a dielectric barrier discharge (DBD) reactor operating at atmospheric pressure (AP) using air and sub-atmospheric pressure (SAP) using air or argon to treat polyamide 6.6 (PA6.6) fabrics. Here, plasma dosages corresponding to 37.5 kW·min·m-2 for AP and 7.5 kW·min·m-2 for SAP in air or argon were used. The hydrophilicity aging effect property of untreated and DBD-treated PA6.6 samples was evaluated from the apparent contact angle. The surface changes in physical microstructure were studied by field emission scanning electron microscopy (FE-SEM). To prove the changes in chemical functional groups in the fibers, Fourier transform infrared spectroscopy (FTIR) was used, and the change in surface bonds was evaluated by energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). In addition, the whiteness effect was investigated by the color spectrophotometry (Datacolor) technique. The results showed that the increase in surface roughness by the SAP DBD treatment contributed to a decrease in and maintenance of the hydrophilicity of PA6.6 fabrics for longer. The SAP DBD in air treatment promoted an enhancement of the aging effect with a low plasma dosage (5-fold reduction compared with AP DBD treatment). Finally, the SAP DBD treatment using argon functionalizes the fabric surface more efficiently than DBD treatments in air.

Argon Atmospheric Plasma Treatment Promotes Burn Healing by Stimulating Inflammation and Controlling the Redox State.

Burns are a public health problem, with second-degree burns as one of the most common types. Although intense inflammation worsens burn healing, effective therapies are scarce. Thus, infections and hypertrophic scars may occur, which compromise patient quality of life and may delay healing. Argon atmospheric plasma (AP) has been shown to positively influence wound healing. In the context of identifying effective and alternative therapies for the treatment of second-degree burns, the present study evaluated AP in the treatment of second-degree burns in rats compared to that for sham treatment on the 2nd, 7th, 14th, and 21st days post-injury. Our results revealed proinflammatory effect for AP by recruiting predominantly neutrophils on the 7th day and macrophages on the 21st day compared to sham treatment, allowing a greater production of interleukin (IL)-1ß, tumor necrosis factor (TNF)-α, and IL-17, and also controlled the inflammation by IL-10 and transforming growth factor (TGF)-ß1. AP also showed antioxidant activity important for controlling oxidative damage on the 2nd day. This favored the induction of angiogenesis from the 2nd day and induction fibroplasia and fibrillogenesis after the 14th day, which enhanced burn healing with the formation of a thinner burn eschar before the 21st day post-burn. Thus, AP effectively modulated the inflammatory phase of second-degree burn healing through the control of oxidative damage that favored the following phases. Therefore, AP is a relevant alternative in the treatment of second-degree burns.

Effect of zirconia decontamination protocols on bond strength and surface wettability.

OBJECTIVE: To evaluate the effects of human saliva decontamination protocols on bond strength of resin cement to zirconia (Y-PSZ), wettability, and microbial decontamination. MATERIALS AND METHODS: Zirconia plates were sandblasted and divided into (a) not contaminated, (b) contaminated with human saliva and: (c) not cleaned, (d) cleaned with air-water spray, (e) cleaned with 70% ethanol, (f) cleaned with Ivoclean, or (g) cleaned with nonthermal atmospheric plasma (NTAP). The wettability and microbial decontamination of the surfaces were determined after saliva contamination or cleaning. Monobond Plus (Ivoclar Vivadent) was applied after cleaning, followed by Variolink LC (Ivoclar Vivadent). The samples were stored 1 week before shear bond strength (SBS) testing, and data (SBS and wettability) were analyzed by one-way analysis of variance and Tukey test (α = .05). RESULTS: Saliva contamination reduced SBS to zirconia compared to not contaminated. Both Ivoclean and NTAP produced higher SBS compared to not cleaned and were not significantly different from the not contaminated. Ivoclean produced the highest contact angle, and NTAP the lowest. With the exception of using just water-spray, all cleaning protocols decontaminated the specimens. CONCLUSIONS: Both Ivoclean and NTAP overcame the effects of saliva contamination, producing an SBS to zirconia comparable to the positive control. CLINICAL SIGNIFICANCE: Dental ceramics should be cleaned prior to resin cementation to eliminate the effects of human saliva contamination, and Ivoclean and NTAP are considered suitable materials for this purpose.

Effects of cold atmospheric plasma on squid proteases and gel properties of protein concentrate from squid (Argentinus ilex) mantle.

The effect of cold atmospheric plasma (CAP) on protein concentrate from squid (Argentinus ilex) mantle has been evaluated in terms of gel properties, protease inhibition, texture profile, color attributes, and water holding capacity. Different exposure time (15, 60, 120, 180, 240 and 300 s) at 60 kV have been employed. Our results indicated that protease activity decreases with increasing treatment time. The highest reduction (p < 0.05) in protease activity (64%) was observed after 240 s of CAP treatment. Texture profile analysis, color properties and water holding capacity of the treated squid gel revealed a significant increase. Protein carbonyl and sulfhydryl group contents findings' showed a significant increase in carbonyl content (about three times of the original content), while the total sulfhydryl group decreased (up to about 40%) in the crude extract. Microstructure and SDS-PAGE analysis revealed a high degree of protein aggregation in the squid gel treated with CAP.

Development of HA/Ag-NPs Composite Coating from Green Process for Hip Applications.

In the present study, biological hydroxyapatite (HA) was obtained from bovine bones through a thermal process. A total of 0% and 1% of silver nanoparticles (Ag-NPs) synthesized from Opuntia ficus (nopal) were added to the biological hydroxyapatite coatings using an atmospheric plasma spray (APS) on a Ti6Al4V substrate. Following this, its antimicrobial efficiency was evaluated against the following bacterial strains: Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa. This was conducted according to the Japanese Industrial Standard (JIS) Z2801:2000 "Antimicrobial Product-Test for Antimicrobial Activity and Efficacy". Scanning electron microscopy (SEM) showed that the silver nanoparticles (Ag-NPs) were evenly distributed on the coating surface. Energy dispersive X-ray spectroscopy (EDX) shows that apatite deposition occurs on a daily basis, maintaining a Ca/P rate between 2.12 and 1.45. Biocompatibility properties were evaluated with osteoblast-like cells (MC3T3-E1) by single-cell gel electrophoresis assay and Tali image cytometry.