High-yield production of active recombinant S. simulans lysostaphin expressed in E. coli in a laboratory bioreactor.

Staphylococcus aureus (S. aureus), which has developed multidrug resistance, leads to many healthcare-associated infections resulting in significant medical and economic losses. Therefore, the development of new efficient strategies to deal with these bacteria has been gaining importance. Lysostaphin is a peptidoglycan hydrolase that has considerable potential as a bacteriocin. However, there have been few reported optimization and scale-up studies of the lysostaphin bioproduction process. Our preliminary results have revealed that the composition of auto-induction media at 30 °C increases the produced lysostaphin around 10-fold in shake flasks. In this study, achieving higher yields for recombinant lysostaphin in E. coli at a laboratory scale has been the aim, through the use of auto-induction media. Optimized medium composition and fermentation parameters were transferred to a laboratory-scale bioreactor. The tested conditions improved protein yields up to 184 mg/L in a 3 L stirred bioreactor and the productivity was improved 2-fold in comparison to previously published reports. Furthermore, this study also showed that lysostaphin is an effective bacteriocin on both commercially available and isolated S. aureus strains. These results will contribute to future larger-scale production of lysostaphin via the proposed fermentation conditions.

Combinatorial strategy towards the efficient expression of lipoxygenase in Escherichia coli at elevated temperatures.

Lipoxygenases (LOXs) are a family of non-heme iron oxidoreductases, which catalyze the addition of oxygen into polyunsaturated fatty acids. They have applications in the food and medical industries. In most studies, the soluble expression of LOXs in microbes requires low temperature (< 20 °C), which increases the cost and fermentation time. Achievement of soluble expression in elevated temperatures (> 30 °C) would shorten the production phase, leading to cost-efficient industrial applications. In this study, a combinatorial strategy was used to enhance the expression of soluble LOXs, comprising plasmid stability systems plus optimized carbon source used for auto-induction expression. Plasmid stability analysis suggested that both active partition systems and plasmid-dependent systems were essential for plasmid stability. Among them, the parBCA in it resulted in the enzyme activity increasing by a factor of 2 (498 ± 13 units per gram dry cell weight (U/g-DCW) after 6-h induction). Furthermore, the optimized carbon source, composed of glucose, lactose, and glycerol, could be used as an auto-induction expression medium and effectively improve the total and soluble expression of LOX, which resulted in the soluble expression of LOX increased by 7 times. Finally, the soluble expression of LOX was 11 times higher with a combinatorial strategy that included both optimized plasmid partition and auto-induction medium. Our work provides a broad, generalizable, and combinatorial strategy for the efficient production of heterologous proteins at elevated temperatures in the E. coli system. KEY POINTS : • Soluble expression of lipoxygenase at 30 °C or higher temperatures is industrially beneficial. • Strategies comprise plasmid partition and optimized auto-induction medium with glucose, lactose, and glycerol as carbon source. • Combinatorial strategy further improved LOX soluble expression at 30 °C and 37 °C.

Development of a constitutive and an auto-inducible high-yield expression system for recombinant protein production in the microalga Nannochloropsis oceanica.

Photoautotrophic microalgae offer a great potential as novel hosts for efficient recombinant protein production. Nannochloropsis oceanica produces an extraordinarily high content of polyunsaturated fatty acids, and its robust growth characteristics, published genome sequence and efficient nuclear transformation make N. oceanica a promising candidate for biotechnological applications. To establish a robust and flexible system for recombinant protein production, we cloned six endogenous, potentially constitutive or inducible promoters from N. oceanica strain CCMP1779 and investigated their strength using monomeric Venus as reporter gene. Microscopic pre-screening of individual transformants revealed that the promoters of elongation factor (EF), tubulin (TUB) and nitrate reductase (NR) enabled high reporter gene expression. Comparative quantitative analyses of transformant populations by flow cytometry and qRT-PCR demonstrated the highest Venus expression from the EF promoter and the NR promoter if extended by an N-terminal 14-amino acid leader sequence. The kinetics of reporter gene expression were analysed during photobioreactor cultivation, achieving Venus yields of 0.3% (for EF) and 4.9% (for NR::LS) of total soluble protein. Since inducible expression systems enable the production of toxic proteins, we developed an auto-induction medium for the NR promoter transformants. By switching the N source from ammonium to nitrate in the presence of low ammonium concentrations, the starting point of Venus induction could be fine-tuned and shifted towards exponential growth phase while maintaining high recombinant protein yields. Taken together, we demonstrate that a model recombinant protein can be produced robustly and at very high levels in N. oceanica not only under constitutive but also under auto-inducible cultivation conditions. KEY POINTS: • Nannochloropsis oceanica might serve as host for recombinant protein production. • Comparative promoter strength analyses were conducted for twelve different constructs. • Robust high-yield recombinant protein production was achieved under constitutive conditions. • The nitrate reductase promoter enabled protein production under auto-induction conditions.

A simple, rapid and cost-effective process for production of latex clearing protein to produce oligopolyisoprene molecules.

Aiming at finding feasible alternatives for rubber waste disposal, the partial enzymatic degradation of poly(cis-1,4-isoprene)-containing materials represents a potential solution. The use of rubber-degrading enzymes and the biotransformation of rubber into new materials is limited by the high costs associated with the production and purification of the enzyme and the complexity of the process. This study presents a simple and low-cost procedure to obtain purified latex clearing protein (Lcp), an enzyme capable of cleaving the double bonds of poly(cis-1,4-isoprene) in presence of oxygen to produce different size of oligomers with terminal aldehyde and ketone groups, respectively. The gene coding for Lcp1VH2 from Gordonia polyisoprenivorans strain VH2 was overexpressed in Escherichia coli C41 (DE3), and by using an auto-induction medium high protein yields were obtained. The cultivation process was described and compared with an IPTG-inducible medium previously used. Purification of the enzyme was performed using salting out precipitation with ammonium sulfate. Different salt concentrations and pH were tested in order to find the optimal for purification, obtaining a concentration of 60mg Lcp per l. The enzymatic activity of the purified enzyme was measured by an oxygen consumption assay in the presence of polyisoprene latex. Volumetric activities of 0.16Uml-1 were obtained at optimal conditions of temperature and pH. The results showed an active and partial purified fraction of Lcp1VH2, able to cleave the backbone of poly(cis-1,4-isoprene) and to produce degradation products that were identified with staining methodologies (Schiff reagent for aldehyde groups and 2,4-DNPH for carbonyl groups) and characterized using nuclear magnetic resonance (NMR). Thirteen different storage conditions were tested for the purified enzyme analyzing the enzymatic activity after 1 and 3 months. Lcp1VH2, as an ammonium sulfate precipitate, was stable, easy to handle and sufficiently active for further analysis. The described methodology offers the possibility to upscale the process and to produce large amounts of this protein.

Construction of HPV18E7 recombinant plasmid and exploration of its optimization expression condition in Escherichia coli / 重庆医学

Objective To construct recombinant plasmids containing HPV18E7 gene ,and explore the optimization condition of its expression in Escherichia coli .Methods The genomic DNA extracted from HeLa cell line which served as a template to the HPV18 E7 gene was amplified using PCR method ;and the amplified product of HPV18E7 gene was connected to the pET-32a(+ ) vector ,which composed the pET-32a(+ )-HPV18E7 recombinant plasmid ;the positive recombinant plasmids were transformed into BL21-DE3-pLysS competent cells and the optimized expression condition was explored in order to obtain a large amount of HPV18E7 oncogenic protein .Results The fragment length of PCR products of HeLa cell genomic DNA was consistent with that of HPV18 E7 gene .In LB medium ,the expression level of the target protein was not high under such conditions as different concentra-tion of IPTG and lactose ,different temperatures and different induction starting amount .Therefore the ZYM-5052 auto-induction medium was tried in this experiment ,and the expression amount of the fusion protein was much higher than that induced with IPTG and lactose .Conclusion The amount of HPV18E7 fusion protein in ZYM-5052 automatic induction medium is much higher than that induced with IPTG and lactose .