An Overview of Microbial Fuel Cell Technology for Sustainable Electricity Production.

The over-exploitation of fossil fuels and their negative environmental impacts have attracted the attention of researchers worldwide, and efforts have been made to propose alternatives for the production of sustainable and clean energy. One proposed alternative is the implementation of bioelectrochemical systems (BESs), such as microbial fuel cells (MFCs), which are sustainable and environmentally friendly. MFCs are devices that use bacterial activity to break down organic matter while generating sustainable electricity. Furthermore, MFCs can produce bioelectricity from various substrates, including domestic wastewater (DWW), municipal wastewater (MWW), and potato and fruit wastes, reducing environmental contamination and decreasing energy consumption and treatment costs. This review focuses on recent advancements regarding the design, configuration, and operation mode of MFCs, as well as their capacity to produce bioelectricity (e.g., 2203 mW/m2) and fuels (i.e., H2: 438.7 mg/L and CH4: 358.7 mg/L). Furthermore, this review highlights practical applications, challenges, and the life-cycle assessment (LCA) of MFCs. Despite the promising biotechnological development of MFCs, great efforts should be made to implement them in a real-time and commercially viable manner.

Embedded Graphite and Carbon Nanofibers in a Polyurethane Matrix Used as Anodes in Microbial Fuel Cells for Wastewater Treatment.

Composites of polyurethane and graphite and polyurethane and carbon nanofibers (PU/Graphite 0.5% and PU/CNF 1%) were synthesized and used as anodes in dual-compartment microbial fuel cells (MFCs) for municipal wastewater treatment; electrical energy generation and organic matter removal were assessed. The maximum power density, coulombic efficiency and chemical oxygen demand (COD) removal efficiency in the MFCs packed with the PU/Graphite 0.5% and PU/CNF 1% composites were 232.32 mW/m3 and 90.78 mW/m3, 5.87 and 4.41%, and 51.38 and 68.62%, respectively. In addition, the internal resistance of the MFCs with the best bioelectrochemical performance (PU/Graphite 0.5%) was 1051.11 Ω. The results obtained in this study demonstrate the feasibility of using these types of materials in dual-compartment MFCs for wastewater treatment with electric power generation.

Bioprospecting for electrochemically active perchlorate-reducing microorganisms.

This study evaluated the electrochemical capacity of four perchlorate-reducing microorganisms (PRMs) isolated from an Altiplanic Andean watershed naturally pressured with perchlorate. Three-electrode electrochemical cells were used to test the electrochemical activity of the obtained isolates. Electrochemical evaluation (i.e., cyclic voltammetry, electrochemical impedance spectroscopy, chronoamperometry) revealed that two isolates identified as Dechloromonas sp. CS-1 and Clostridioides sp. CS-2 are electrochemically active PRMs. Bacterial isolates exhibiting cathodic peaks at -651 mV and -303 mV (vs. Ag/AgCl) for CS-1 and CS-2, respectively. Electrotrophic perchlorate removal was demonstrated by a 6-days chronoamperometry with removal rates of 27 and 17 mg L-1 day-1 and cathodic efficiencies of 93% and 45%, for CS-1 and CS-2, respectively. Chemical and electrochemical results suggest two different mechanisms of electrotrophic perchlorate removal, a complete eight-electron bio-reduction (i.e., perchlorate to chloride) for CS-1 and a partial two-electron bio-reduction (i.e., perchlorate to chlorate) for CS-2. The observed differences could be linked to their enzymatic differences, as in their membrane compositions. Thus, the results of this work increase the limited number of known electrotrophic microorganisms and expand the application of bioelectrochemical systems to develop new perchlorate treatment and remediation technologies.

Biogenic synthesis of selenium nanoparticles by Shewanella sp. HN-41 using a modified bioelectrochemical system

BACKGROUND Synthesis of selenium nanoparticles from selenite by Shewanella sp. HN-41 demonstrated that particle size depended on the reaction time and biomass of cells. The slow reaction and low biomass tended to form small particles. In this study, Shewanella sp. HN-41 was introduced into the anode of a nonexternal circuit bioelectrochemical system (nec_BES) to convert chemical energy from lactate to low electron current to the cathode, where selenite was reduced. RESULTS Our experiment with two systems, one bioelectrochemical system with a cathode flushed with nitrogen and the other with a no-nitrogen-flushing cathode, showed that the former could not produce Se nanoparticles after 21 d, but the latter formed them with an average size of 37.7 nm. The SEM and TEM images demonstrated that the particle size of 10 nm occupied over 10% and most of the particles were in the range of 30­60 nm. The XRD result and SAED image demonstrated no clear peaks of crystal and proved that the Se nanoparticles are amorphous. CONCLUSIONS : The clean Se nanoparticles were synthesized and completely separated from bacterial cells in the bioelectrochemical system. This study opened a new approach for the biological synthesis of metal nanoparticles. Finally, the Se products in the range of 30­60 nm can be tested for antimicrobial activities in medical applications

Wiring Up Along Electrodes for Biofilm Formation.

Millimeter-length cables of bacteria were discovered growing along a graphite-rod electrode serving as an anode of a microbial electrolysis cell (MEC). The MEC had been inoculated with a culture of Fe-reducing microorganisms enriched from a polluted river sediment (Reconquista river, Argentina) and was operated at laboratory controlled conditions for 18 days at an anode poised potential of 240 mV (vs. Ag/AgCl), followed by 23 days at 480 mV (vs. Ag/AgCl). Anode samples were collected for scanning electron microscopy, phylogenetic and electrochemical analyses. The cables were composed of a succession of bacteria covered by a membranous sheath and were distinct from the known "cable-bacteria" (family Desulfobulbaceae). Apparently, the formation of the cables began with the interaction of the cells via nanotubes mostly located at the cell poles. The cables seemed to be further widened by the fusion between them. 16S rRNA gene sequence analysis confirmed the presence of a microbial community composed of six genera, including Shewanella, a well-characterized electrogenic bacteria. The formation of the cables might be a way of colonizing a polarized surface, as determined by the observation of electrodes extracted at different times of MEC operation. Since the cables of bacteria were distinct from any previously described, the results suggest that bacteria capable of forming cables are more diverse in nature than already thought. This diversity might render different electrical properties that could be exploited for various applications.