Characterization and application of synthesized calcium alginate-graphene oxide for the removal of Cr3+, Cu2+ and Cd2+ ions from tannery effluents.

Environmental sustainability has gained acceptance to achieving the goal of a secure ecosystem with a reliable management system. Heavy metal remediation of aqueous streams is of special concern due to the intractability and persistence in the environment. Adsorption is a potential alternative to the existing inefficient conventional technologies for the removal and recovery of metal ions from aqueous solutions and becomes vital to align with the Sustainable Development Goals (SDGs) and mitigate the adverse environmental and social impacts. Calcium Alginate-Graphene oxide (CA-GO) composite has been synthesized for the adsorption of heavy metals including Cr3+, Cu2+, and Cd2+ ions from tannery effluents. Graphene oxide is prepared from commercial graphite powder and reacted with sodium alginate and calcium chloride to form the beads of CA-GO composite. The developed composite was characterized by FTIR, elemental analysis, SEM, XRD analysis, and Raman spectroscopy. Moreover, the effect of pH, adsorbent dosage, contact time, and initial concentration of metal ions on the adsorption capacity were investigated through batch experiments. At a pH>3.0 (pHzpc), the carboxyl group of CA-GO was deprotonated to make the surface negatively charged and facilitate metal adsorption. The optimum pH and maximum adsorption capacity of CA-GO for removal of Cr(III), Cu(II), and Cd(II) were 4.5, 6.0, and 7.0, and 90.58, 108.57, and 134.77 mg g-1, respectively. The kinetics, adsorption isotherms, and thermodynamics were studied to determine the adsorption mechanism. The kinetic of adsorption adopted the second-order model. Thermodynamic parameter were calculated and the adsorption process was determined to be exothermic and spontaneous at room temperature. The developed composite has been efficaciously applied for the removal of metal ions and pollution from real tannery effluents.

Study on Adsorption of Cd in Solution and Soil by Modified Biochar-Calcium Alginate Hydrogel.

Contamination with cadmium (Cd) is a prominent issue in agricultural non-point source pollution in China. With the deposition and activation of numerous Cd metal elements in farmland, the problem of excessive pollution of agricultural produce can no longer be disregarded. Considering the issue of Cd pollution in farmland, this study proposes the utilization of cross-linked modified biochar (prepared from pine wood) and calcium alginate hydrogels to fabricate a composite material which is called MB-CA for short. The aim is to investigate the adsorption and passivation mechanism of soil Cd by this innovative composite. The MB-CA exhibits a higher heavy metal adsorption capacity compared to traditional biochar and hydrogel due to its increased oxygen-containing functional groups and heavy metal adsorption sites. In the Cd solution adsorption experiment, the highest Cd2+ removal rate reached 85.48%. In addition, it was found that the material also has an excellent pH improvement effect. Through the adsorption kinetics experiment and the soil culture experiments, it was determined that MB-CA adheres to the quasi-second-order kinetic model and is capable of adsorbing 35.94% of Cd2+ in soil. This study validates the efficacy of MB-CA in the adsorption and passivation of Cd in soil, offering a novel approach for managing Cd-contaminated cultivated land.

Oral alginate microspheres for the efficient site-specific delivery of epidermal growth factor attenuated murine ulcerative colitis via repairing the mucosal barrier.

Ulcerative colitis (UC) is a chronic bowel inflammatory disease affecting the colorectum. Epidermal growth factor (EGF) has been demonstrated to be effective to counteract UC. However, there exists the gastrointestinal challenges such as stomach acid, enzyme and bile salts for oral delivery of EGF. Herein, calcium alginate microsphere was prepared by the microfluidic technique to encapsulate EGF. The morphology of EGF-loaded microsphere (MS-EGF) was spherical and its average particle size was 80 ± 23 µm. The encapsulation efficiency of EGF was reaching to 93.8 % ± 1.6 %. In vitro release experiments showed that MS-EGF presented the good pH-sensitive properties, that was, it could effectively resist the gastric acid and small intestinal fluids, and undergone the rapid dissolution in the artificial colon fluid. In vitro cellular experiments demonstrated that the bioactivity of EGF was well preserved by microsphere. Moreover, in vivo murine colitis model showed that MS-EGF presented the obvious colitis alleviation. Furthermore, the colonic morphology of colitis mice was effectively recovered and the tight junction between the gut epithelium was obviously repaired. In conclusion, calcium alginate microsphere might be a promising vehicle of EGF for UC treatment.

Biosorption of arsenic (III) from aqueous solution using calcium alginate immobilized dead biomass of Acinetobacter sp. strain Sp2b.

This study presents a novel biosorbent developed by immobilizing dead Sp2b bacterial biomass into calcium alginate (CASp2b) to efficiently remove arsenic (AsIII) from contaminated water. The bacterium Sp2b was isolated from arsenic-contaminated industrial soil of Punjab, a state in India. The strain was designated Acinetobacter sp. strain Sp2b as per the 16S rDNA sequencing, GenBank accession number -OP010048.The CASp2b was used for the biosorption studies after an initial screening for the biosorption capacity of Sp2b biomass with immobilized biomass in both live and dead states. The optimum biosorption conditions were examined in batch experimentations with contact time, pH, biomass, temperature, and AsIII concentration variables. The maximum biosorption capacity (qmax = 20.1 ± 0.76 mg/g of CA Sp2b) was obtained at pH9, 35 ̊ C, 20 min contact time, and 120 rpm agitation speed. The isotherm, kinetic and thermodynamic modeling of the experimental data favored Freundlich isotherm (R2 = 0.941) and pseudo-2nd-order kinetics (R2 = 0.968) with endothermic nature (ΔH° = 27.42) and high randomness (ΔS° = 58.1).The scanning electron microscopy with energy dispersive X-ray (SEM-EDX) analysis indicated the As surface binding. The reusability study revealed the reasonable usage of beads up to 5 cycles. In conclusion, CASp2b is a promising, efficient, eco-friendly biosorbent for AsIII removal from contaminated water.

Novel pH- and thermal-responsive oleogel capsules: Featuring an oleogel core and ultrathin calcium-alginate shell.

Oleogels have been explored as a new lipid-based delivery system, however, their insolubility and unsuitable shape severely limit their application in food systems. Herein, core-shell oleogel capsules with high monodispersity (coefficient variation (CV) < 5%)) were prepared via gravity-assisted co-flowing microfluidic device and simply air-drying. The oleogel capsules with oleogel core and ultrathin calcium-alginate shell were prepared. Oleogel capsules maintained their original shape at pH = 2.0 but swelled rapidly at pH = 6.8 and 7.4. The swelling ratio of shell can be adjusted by inner fluid flow rate (Qin). Notably, the core with beeswax (BW) crystal network, effectively improved the stability performances and also could provide thermal response. Finally, the oleogel capsules demonstrated excellent sustained release and UV protection of lipophilic bioactives. This work sheds light on development of novel oleogel capsules, making them ideal candidates for smart food encapsulation applications.

Oral administration of PEDV-dissolved Alg-CS gel induces high and sustained mucosal immunity in mice.

Porcine epidemic diarrhea (PED) is a serious disease in piglets that leads to high mortality. An effective measure that provides higher IgA levels in the intestine and milk is required to decrease losses. Porcine epidemic diarrhea virus (PEDV) was dissolved in calcium alginate (Alg) and combined with chitosan (CS) via electrostatic interactions between cationic chitosan and anionic alginate to create a porous gel (Alg-CS+PEDV). The gel was used to immunize mice orally or in combination with subcutaneous injections of inactivated PEDV vaccine. At 12 and 24 days after immunization, levels of IgA and IgG in Alg-CS+PEDV were higher than with normal PEDV oral administration. At 24 days after immunization, the concentration of IFN-γ in Alg-CS+PEDV was higher than with normal PEDV oral administration. Furthermore, oral administration combining subcutaneous immunization induced higher levels of IgG and IgA than oral administration alone. Our study provides a new method for the preparation and administration of oral vaccines to achieve enhanced mucosal immunity against PEDV.

Preparation, evaluation and application of MRI detectable sunitinib-loaded calcium alginate/poly(acrylic acid) hydrogel microspheres.

Transcatheter arterial chemoembolization (TACE) is an effective method for the treatment of unresectable hepatocellular carcinoma. Although many embolic agents have been developed in TACE, there are few ideal embolic agents that combine drug loading, imaging properties and vessel embolization. Here, we developed novel magnetic embolic microspheres that could simultaneously load sunitinib malate (SU), be detected by magnetic resonance imaging (MRI) and block blood vessels. Calcium alginate/poly (acrylic acid) hydrogel microspheres (CA/PAA-MDMs) with superparamagnetic iron oxide nanoparticles (SPIONs) modified by citric acid were prepared by a drip and photopolymerization method. The embolization and imaging properties of CA/PAA-MDMs were evaluated through a series of experiments such as morphology, X-ray diffraction and X-ray photoelectron spectroscopy, magnetic responsiveness analysis, elasticity, cytotoxicity, hemolysis test, in vitro MRI evaluation, rabbit ear embolization and histopathology. In addition, the ability of drug loading and drug release of CA/PAA-MDMs were investigated by using sunitinib (SU) as the model drug. In conclusion, CA/PAA-MDMs showed outstanding drug loading capability, excellent imaging property and embolization effect, which would be expected to be used as a potential biodegradable embolic agent in the clinical interventional therapy.

The treatment of oily wastewater by thermo-responsive calcium alginate capsules immobilized Pseudomonas aeruginosa.

A microfluidic strategy of smart calcium alginate (CA) capsules is presented to immobilize Pseudomonas aeruginosa to treat oil slicks effectively. The capsule wall is embedded with poly (N-isopropyl acrylamide) sub-microspheres as thermo-responsive switches. CA capsules, with a diameter of 3.26 mm and a thin wall thickness about 12.8 µm, have satisfying monodispersity, cavity structure, and dense surface structures. The capsules possess excellent encapsulation of bacteria, which are fixed in a restricted space and become more aggregated. It overcomes the disadvantages of a long fermentation production cycle, easy loss of bacteria, and susceptibility to shear effect. The smart CA capsules immobilized with bacteria treat model wastewater containing soybean oil or diesel and display favorable fermentation ability. The capsules can effectively treat oil slicks with high concentration, and it is an economical way for processing oily wastewater. PRACTITIONER POINTS: A thermo-responsive calcium alginate capsule was prepared by microfluidic strategy. Pseudomonas aeruginosa is environmentally friendly in treating oil slicks. The capsules, immobilized bacteria, treat oil slicks effectively. This study provides an economical way for processing different oily water.

Multifunctional polyaniline modified calcium alginate aerogel membrane with antibacterial, oil-water separation, dye and heavy metal ions removal properties for complex water purification.

With the rapid development of urbanization, the discharge of industrial wastewater has led to increasingly critical water pollution issues. Additionally, heavy metals, organic dyes, microorganisms and oil pollution often coexist and have persistence and harmfulness. Developing materials that can treat these complex pollutants simultaneously has important practical significance. In this study, a calcium alginate-based aerogel membrane (PANI@CA membrane) was prepared by spraying, polymerization, Ca2+ cross-linking and freeze-drying using aniline and sodium alginate as raw materials. Oil-water emulsion can be separated by PANI@CA membrane only under gravity, and the separation efficiency was as high as 99 %. At the same time, the membrane can effectively intercept or adsorb organic dyes and heavy metal ions. The removal rates of methylene blue and Congo red were above 92 % and 63 % respectively even after ten times of cyclic filtration. The removal rate of Pb2+ was up to 95 %. In addition, PANI@CA membrane shows excellent photothermal conversion ability, and it can effectively kill Staphylococcus aureus under 808 nm laser irradiation. PANI@CA membrane has the advantages of low cost, simple preparation, good stability and high recycling ability, and has potential application prospects in wastewater treatment.

Development of a novel bionanocomposite of UiO-66/xanthan gum/alginate crosslinked by calcium chloride for azo dye removal: Insight into adsorption kinetics, isotherms, and thermodynamics.

In the present work, UiO-66/xanthan gum/alginate bionanocomposite adsorbent was fabricated using the in-situ crosslinking-gelation method, characterized by different techniques, and finally used for the removal of methylene blue dye from aqueous solution. Adsorption studies were performed using batch experiments and the influencing operational parameters such as contact time, initial pH solution, temperature, initial dye concentration, adsorbent dose, pHPZC, swelling, regeneration, and reuse of the adsorbent were investigated. The various kinetic models (pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion) and isotherm models (Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich) were used to analysis of the experiment results. The results were best fitted to the pseudo-second-order kinetic and Langmuir isotherm models. The maximum adsorption capacity of dye on the adsorbent was obtained at 9.96 mg/g at pH = 11. The value of pHPZC for the adsorbent was obtained at about 8. According to thermodynamic parameters, the dye adsorption was found as spontaneous and endothermic due to the negative value of the ΔG° and ΔH°. After 4 times of reusability cycles, the adsorption efficiency remained above 86 %, which represented a certain regeneration ability. As a result, this research indicates that UiO-66/xanthan gum/alginate bionanocomposite can be utilized as a promising bio-adsorbent for azo dye removal from contaminated wastewater.

Plus moist HS-W®: a new nasal packing material for the middle meatus in endoscopic sinus surgery.

PURPOSE: Removal of the current calcium alginate packing materials to the middle meatus in endoscopic sinus surgery (ESS) is usually accompanied by discomfort or pain owing to the hard and brittle nature of these materials. Plus moist HS-W® is a new calcium alginate packing material released in 2022 developed to overcome this issue by changing the uronic acid component. We aimed to compare the discomfort/pain during the removal of Plus moist HS-W® with Kaltostat®, as well as their suitability as packing materials in ESS. METHODS: Kaltostat® and Plus moist HS-W® were used as packing materials in 22 and 21 patients who underwent ESS in 2021 and 2022, respectively. Patients were asked to rate the pain during the packing removal 10 days after ESS using the Numerical Rating Scale (NRS). The ratio of residual packing materials, number of suctions (insertions/extractions of the suction cannula), and time required to remove packing materials were measured. Postoperative complications such as hemorrhage, local infection, lateralization of the middle turbinate, and synechia of the middle meatus were also evaluated. RESULTS: The Plus moist HS-W® group exhibited significantly lower NRS pain scores, a lower ratio of residual packing materials, a reduced number of suctions, and a shorter time required to remove the packing. No obvious postoperative complications occurred in both groups except for one suspicious case of a slight infection in the Kaltostat® group. CONCLUSION: Compared with Kaltostat®, Plus moist HS-W®, characterized by better gelatinization than Kaltostat®, benefits patients by minimizing discomfort/pain during removal. LEVEL OF EVIDENCE: Level 3.

Assessment of calcium alginate gels as wall materials for encapsulation systems.

BACKGROUND: Calcium alginate gels are widely used to encapsulate active compounds. Some characteristic parameters of these gels are necessary to describe the release of active compounds through mechanistic mathematical models. In this work, transport and kinetics properties of calcium alginate gels were determined through simple experimental techniques. RESULTS: The weight-average molecular weight ( M ¯ w = 192 × 103 Da) and the fraction of residues of α-l-guluronic acid ( F G = 0.356) of sodium alginate were determined by capillary viscometry and 1 H-nuclear magnetic resonance at 25 °C, respectively. Considering the half egg-box model, both values were used to estimate the molecular weight of calcium alginate as M g = 2.02 × 105 Da. An effective diffusion coefficient of water ( D eff , w = 2.256 × 10-9 m2 s-1 ) in calcium alginate was determined using a diffusion cell at 37 °C. Finally, a kinetics constant of depolymerization ( k m = 9.72 × 10-9 m3 mol-1 s-1 ) of calcium alginate was obtained considering dissolution of calcium to a medium under intestinal conditions. CONCLUSION: The experimental techniques used are simple and easily reproducible. The obtained values may be useful in the design, production, and optimization of the alginate-based delivery systems that require specific release kinetics of the encapsulated active compounds. © 2023 Society of Chemical Industry.

High-efficiency antibacterial calcium alginate/lysozyme/AgNPs composite sponge for wound healing.

Infection poses a significant barrier to effective wound repair, leading to increased inflammatory responses that ultimately result in incomplete and prolonged wound healing. To address this challenge, numerous antibacterial ingredients have been incorporated into dressings to inhibit wound infection. Our previous work demonstrated that lysozyme/silver nanoparticles (LYZ/AgNPs) complexes, prepared using an eco-friendly one-step aqueous method, exhibited excellent antibacterial efficacy with favorable biosafety. To further explore its potential application in advancing wound healing, calcium alginate (CA) with good porosity, water absorption, and water retention capacities was formulated with LYZ/AgNPs to prepare composite sponge (CA/LYZ/AgNPs). As expected, in vivo experiments involving full-thickness skin wound and scald wound healing experiments demonstrated that CA-LYZ-AgNPs composite sponges with excellent biocompatibility exhibited remarkable antibacterial activity against gram-positive bacteria, gram-negative bacteria and fungi, and outperformed the wound healing process efficacy of other commercially available AgNPs-loaded wound dressings. In summary, this work introduces a CA/LYZ/AgNPs sponge featuring exceptional antibacterial efficacy and biocompatibility, thus holding promising potential in wound care applications.

Fabrication and characterization of Araucaria gum/calcium alginate composite beads for batch and column adsorption of lead ions.

In this work, we developed five solid adsorbents such as calcium alginate beads (CG), Araucaria gum (AR) extracted from Araucaria heterophylla tree by chemical precipitation procedures, and Araucaria gum/calcium alginate composite beads (CR21, CR12, and CR11) prepared with different calcium alginate: Araucaria gum ratios (2:1, 1:2, and 1:1, respectively). The synthesized solid adsorbents were characterized utilizing TGA, XRD, nitrogen adsorption/desorption analysis, ATR-FTIR, pHPZC, swelling ratio, SEM, and TEM. Through the batch and column adsorption strategies, we evaluated the effect of adsorbent dose, pH, initial Pb (II) concentration, shaking time, bed height, and flow rate. The data of batch technique indicated that CR11 demonstrated a maximum batch adsorption capacity of 149.95 mg/g at 25 °C. Lead ions adsorption was well fitted by pseudo-second order and Elovich according to kinetic studies, in addition to Langmuir and Temkin models based on adsorption isotherm studies onto all the samples. Thermodynamic investigation showed that Pb (II) adsorption process is an endothermic, physical, and spontaneous process. The highest column adsorption capacity (161.1 mg/g) was achieved by CR11 at a bed height of 3 cm, flow rate of 10 mL/min, and initial Pb+2 concentration of 225 mg/L with 68 min as breakthrough time and 180 min as exhaustion time. Yoon-Nelson and Thomas models applied well the breakthrough curves of Pb (II) column adsorption. The maximum column adsorption capacity was decreased by 11.4 % after four column adsorption/desorption processes. Our results revealed that CR11 had an excellent adsorption capacity, fast kinetics, and good selectivity, emphasizing its potential for its applications in water treatment.

Elucidating uranium interactions with synthetic Na-P1 zeolite/Ca2+-substituted alginate composite granules through batch and spectroscopic studies: Emphasizing the significance of ion exchange and complexation.

Uranium, a key member of the actinides series, is radioactive and may cause severe environmental hazards once discharged into the water due to high toxicity. Removal of uranium via adsorption by applying tailored, functional adsorbents is at the forefront of tackling such pollution. Here, we report the optimized functionalization of the powder coal fly-ash (CFA) derived Na-P1 synthetic zeolite to the form of granules by employing the biodegradable polymer-calcium alginate (CA) and their application to remove aqueous U. The optimized synthesis showed that granules are formed at the CA concentration equals to 0.5 % wt., and that application of 1% wt. solution renders the most effective U scavengers. The maximum U adsorption capacity (qmax) increases significantly after CA modification from 44.48 mgU/g for native, powder Na-P1 zeolite to 62.53 mg U/g and 76.70 mg U/g for 0.5 % wt. and 1 % wt. CA respectively. The U adsorption follows the Radlich-Peterson isotherm model, being the highest at acidic pH (pHeq∼4). The U adsorption kinetics reveals swift U uptake, reaching equilibrium after 2h for 1 % ZACB and 3 h for 0.5 % wt. ZACB following the pseudo-second-order (PSO) kinetic model. SEM-EDXS investigation elucidates that adsorbed U occurs onto materials as an inhomogenous, well-dispersed, and micrometer-scale aggregate. Further, XPS and µ-XRF spectroscopies complementarily confirmed the hexavalent oxidation state of adsorbed U and its altered distribution on ZACBs with varying CA concentrations. U distribution was probed "in-situ" onto materials while correlations between the major elements (Al, Si, Ca, U) contributing to U scavenging were calculated and compared. Finally, a real-life coal mine wastewater (CMW) polluted by 238U and 228,226Ra was successfully purified, satisfying WHO guidelines after treatment using ZACBs. These findings offer new insights on successful yet optimized Na-P1 zeolite modification using biodegradable polymer (Ca2+-exchanged alginate) aimed at efficient U removal, displaying a near-zero environmental impact.

Biochar supported nanoscale zerovalent iron-calcium alginate composite for simultaneous removal of Mn(II) and Cr(VI) from wastewater: Sorption performance and mechanisms.

Heavy metal pollution in water caused by industrial activities has become a global environmental issue. Among them, manganese mining and smelting activities have caused the combined pollution of Cr(VI) and Mn(II) in water, posing a serious ecotoxicological risk to ecological environments and human health. To efficiently remove Cr(VI) and Mn(II) from wastewater, a novel biochar supported nanoscale zerovalent iron-calcium alginate composite (CA/nZVI/RSBC) was synthesized by liquid-phase reduction and calcium alginate embedding methods. The adsorption performance and mechanisms of Cr(VI) and Mn(II) by CA/nZVI/RSBC were investigated. The maximum adsorption capacities of Cr(VI) and Mn(II) onto CA/nZVI/RSBC fitted by the Langmuir model were 5.38 and 39.78 mg/g, respectively, which were much higher than the pristine biochar. The iron release from CA/nZVI/RSBC was comparatively lower than that of nZVI/RSBC. Mn(II) presence enhanced the reduction of Cr(VI) by CA/nZVI/RSBC. The results of XRD, XPS, and site energy distribution analysis indicated that redox was the predominant mechanism of Cr(VI) adsorption, while electrostatic attraction dominated Mn(II) adsorption. This study provides a novel alternative way for the simultaneous removal of Cr(VI) and Mn(II) in wastewater.

Akkermansia muciniphila Encapsulated in Calcium-Alginate Hydrogelated Matrix: Viability and Stability over Aerobic Storage and Simulated Gastrointestinal Conditions.

Akkermansia muciniphila is considered a next-generation probiotic to be incorporated in new food and pharmaceutical formulations. Effective delivery systems are required to ensure high probiotic viability and stability during product manufacture, shelf-life, and post-consumption, namely, throughout digestion. Hydrogelated matrices have demonstrated promising potential in this dominion. Hence, this work aimed to evaluate the effect of a calcium-alginate hydrogelated matrix on A. muciniphila viability during 28-days refrigerated aerobic storage and when exposed to simulated gastrointestinal conditions, in comparison with that of free cells. Akkermansia muciniphila was successfully encapsulated in the calcium-alginate matrix via extrusion (60% encapsulation yield). Furthermore, encapsulated A. muciniphila exhibited high stability (a loss in viability lower than 0.2 log-cycle) after 28-days of refrigerated aerobic storage, maintaining its viability around 108 CFU/g. Prominently, as the storage time increased, encapsulated A. muciniphila revealed higher viability and stability regarding in vitro gastrointestinal conditions than free cells. This suggests that this encapsulation method may attenuate the detrimental effects of prolonged aerobic storage with a subsequent gastrointestinal passage. In conclusion, encapsulation via extrusion using a calcium-alginate hydrogelated matrix seems to be a promising and adequate strategy for safeguarding A. muciniphila from adverse conditions encountered during refrigerated aerobic storage and when exposed to the gastrointestinal passage.

Bacterial Viability in Self-Healing Concrete: A Case Study of Non-Ureolytic Bacillus Species.

Cracking is an inevitable feature of concrete, typically leading to corrosion of the embedded steel reinforcement and massive deterioration because of the freezing-thawing cycles. Different means have been proposed to increase the serviceability performance of cracked concrete structures. This case study deals with bacteria encapsulated in cementitious materials to "heal" cracks. Such a biological self-healing system requires preserving the bacteria's viability in the cement matrix. Many embedded bacterial spores are damaged during concrete curing, drastically reducing efficiency. This study investigates the viability of commonly used non-ureolytic bacterial spores when immobilized in calcium alginate microcapsules within self-healing cementitious composites. Three Bacillus species were used in this study, i.e., B. pseudofirmus, B. cohnii, and B. halodurans. B. pseudofirmus demonstrated the best mineralization activity; a sufficient number of bacterial spores remained viable after the encapsulation. B. pseudofirmus and B. halodurans spores retained the highest viability after incorporating the microcapsules into the cement paste, while B. halodurans spores retained the highest viability in the mortar. Cracks with a width of about 0.13 mm were filled with bacterial calcium carbonate within 14 to 28 days, depending on the type of bacteria. Larger cracks were not healed entirely. B. pseudofirmus had the highest efficiency, with a healing coefficient of 0.497 after 56 days. This study also revealed the essential role of the cement hydration temperature on bacterial viability. Thus, further studies should optimize the content of bacteria and nutrients in the microcapsule structure.

Bovine Serum Albumin Molecularly Imprinted Electrochemical Sensors Modified by Carboxylated Multi-Walled Carbon Nanotubes/CaAlg Hydrogels.

In this paper, sodium alginate (NaAlg) was used as functional monomers, bovine serum albumin (BSA) was used as template molecules, and calcium chloride (CaCl2) aqueous solution was used as a cross-linking agent to prepare BSA molecularly imprinted carboxylated multi-wall carbon nanotubes (CMWCNT)/CaAlg hydrogel films (MIPs) and non-imprinted hydrogel films (NIPs). The adsorption capacity of the MIP film for BSA was 27.23 mg/g and the imprinting efficiency was 2.73. The MIP and NIP hydrogel film were loaded on the surface of the printed electrode, and electrochemical performance tests were carried out by electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) using the electrochemical workstation. The loaded MIP film and NIP film effectively improved the electrochemical signal of the bare carbon electrode. When the pH value of the Tris HCl elution solution was 7.4, the elution time was 15 min and the adsorption time was 15 min, and the peak currents of MIP-modified electrodes and NIP-modified electrodes reached their maximum values. There was a specific interaction between MIP-modified electrodes and BSA, exhibiting specific recognition for BSA. In addition, the MIP-modified electrodes had good anti-interference, reusability, stability, and reproducibility. The detection limit (LOD) was 5.6 × 10-6 mg mL-1.

Characterization of a chlorine resistant and hydrophilic TiO2/calcium alginate hydrogel filtration membrane used for protein purification maintaining protein structure.

The development of membranes for protein purification has stringent requirement of disinfection resistance, low protein adsorption and anti-fouling, without changing protein structure. In this study, hydrophilic titanium dioxide (TiO2)/calcium alginate (TiO2/CaAlg) hydrogel membranes were prepared by a simple ionic cross-linking method. The effects of the porogenic agent polyethylene glycol (PEG) concentration, the molecular weight of PEG, and the concentration of TiO2 on the filtration properties were systematically investigated. The TiO2/CaAlg membrane exhibited excellent bovine serum albumin (BSA) rejection and anti-fouling properties. The mechanical properties and surface energy of the TiO2/CaAlg membrane were significantly improved. The chemical bonding mechanism of TiO2 and NaAlg was investigated by molecular dynamic simulation. The TiO2/CaAlg membrane had good chlorine resistance and could be disinfected or cleaned with sodium hypochlorite. The TiO2/CaAlg hydrogel membrane loaded with polyhydroxybutyrate (PHB) nanofibers maintained high flux (136.7 L/m2h) and high BSA rejection (98.0 %) at 0.1 MPa. The results of circular dichroism and synchronous fluorescence indicated that the secondary structure of BSA was maintained after membrane separation. This study provides one method for the preparation of green and environmentally friendly membrane for protein purification.