Probing the Antiplasmodial Properties of Plakortinic Acids C and D: An Uncommon Pair of Marine Peroxide-Polyketides Isolated from a Two-Sponge Association of Plakortis symbiotica and Xetospongia deweerdtae Collected near Puerto Rico.

Plakortinic acids C (1) and D (2), an unseparable pair of endoperoxide polyketides isolated and purified from the symbiotic association of Caribbean Sea sponges Plakortis symbiotica-Xestospongia deweerdtae, underwent in vitro evaluation for antiplasmodial activity against the malaria parasite Plasmodium berghei using a drug luminescence assay. Initial screening at 10 µM revealed 50% in vitro parasite growth inhibition. The title compounds displayed antiplasmodial activity with an EC50 of 5.3 µM toward P. berghei parasites. The lytic activity against erythrocytes was assessed through an erythrocyte cell lysis assay, which showed non-lytic activity at lower concentrations ranging from 1.95 to 3.91 µM. The antiplasmodial activity and the absence of hemolytic activity support the potential of plakortinic acids C (1) and D (2) as promising lead compounds. Moreover, drug-likeness (ADMET) properties assessed through the pkCSM server predicted high intestinal absorption, hepatic metabolism, and volume of distribution, indicating favorable pharmacokinetic profiles for oral administration. These findings suggest the potential suitability of these metabolites for further investigations of antiplasmodial activity in multiple parasitic stages in the mosquito and Plasmodium falciparum. Notably, this study represents the first report of a marine natural product exhibiting the unique 7,8-dioxatricyclo[4.2.2.02,5]dec-9-ene motif being evaluated against malaria.

Antimicrobial Polymer-Based Assemblies: A Review.

An antimicrobial supramolecular assembly (ASA) is conspicuous in biomedical applications. Among the alternatives to overcome microbial resistance to antibiotics and drugs, ASAs, including antimicrobial peptides (AMPs) and polymers (APs), provide formulations with optimal antimicrobial activity and acceptable toxicity. AMPs and APs have been delivered by a variety of carriers such as nanoparticles, coatings, multilayers, hydrogels, liposomes, nanodisks, lyotropic lipid phases, nanostructured lipid carriers, etc. They have similar mechanisms of action involving adsorption to the cell wall, penetration across the cell membrane, and microbe lysis. APs, however, offer the advantage of cheap synthetic procedures, chemical stability, and improved adsorption (due to multipoint attachment to microbes), as compared to the expensive synthetic routes, poor yield, and subpar in vivo stability seen in AMPs. We review recent advances in polymer-based antimicrobial assemblies involving AMPs and APs.

The Saccharomyces cerevisiae Ncw2 protein works on the chitin/ß-glucan organisation of the cell wall.

The NCW2 gene was recently described as encoding a GPI-bounded protein that assists in the re-modelling of the Saccharomyces cerevisiae cell wall (CW) and in the repair of damage caused by the polyhexamethylene biguanide (PHMB) polymer to the cell wall. Its absence produces a re-organization of the CW structure that result in resistance to lysis by glucanase. Hence, the present study aimed to extend the analysis of the Ncw2 protein (Ncw2p) to determine its physiological role in the yeast cell surface. The results showed that Ncw2p is transported to the cell surface upon O-mannosylation mediated by the Pmt1p-Pmt2p enzyme complex. It co-localises with the yeast bud scars, a region in cell surface formed by chitin deposition. Once there, Ncw2p enables correct chitin/ß-glucan structuring during the exponential growth. The increase in molecular mass by hyper-mannosylation coincides with the increasing in chitin deposition, and leads to glucanase resistance. Treatment of the yeast cells with PHMB produced the same biological effects observed for the passage from exponential to stationary growth phase. This might be a possible mechanism of yeast protection against cationic biocides. In conclusion, we propose that Ncw2p takes part in the mechanism involved in the control of cell surface rigidity by aiding on the linkage between chitin and glucan layers in the modelling of the cell wall during cell growth.

Engineering the Osmotic State of Pseudomonas putida KT2440 for Efficient Cell Disruption and Downstream Processing of Poly(3-Hydroxyalkanoates).

In the last decade, the development of novel programmable cell lytic systems based on different inducible genetic constructs like the holin-endolysin and lysozyme appears as a promising alternative to circumvent the use of costly enzymes and mechanical disrupters for downstream processing of intracellular microbial products. Despite the advances, upon activation of these systems the cellular disruption of the biocatalyst occurs in an extended period, thus delaying the recovery of poly(3-hydroxyalkanoate) (PHA). Herein the osmotic state of Pseudomonas putida KT2440 was engineered by inactivating the inner-membrane residing rescue valve MscL, which is responsible mainly for circumventing low-osmolarity challenges. Then the major outer membrane porin OprF and the specific porin OprE were overproduced during PHA producing conditions on decanoate-grown cells. The engineered P. putida strains carrying each porin showed no impairment on growth rate and final biomass and PHA yield after 48 h cultivation. Expression of both porins in tandem in the mutant strain KTΔmscL-oprFE led to a slight reduction of the biomass synthesis (∼10%) but higher PHA accumulation (%wt) relative to the cell dry mass. Each strain was then challenged to an osmotic upshift for 1 h and subsequently to a rapid passage to a hypotonic condition where the membrane stability of the KTΔmscL-oprFE suffered damage, resulting in a rapid reduction of cell viability. Cell disruption accounted for >95% of the cell population within 3 h as reported by colony forming units (CFU), FACS analyses, and transmission electron microscopy. PHA recovery yielded 94.2% of the biosynthesized biopolymer displaying no significant alterations on the final monomer composition. This study can serve as an efficient genetic platform for the recovery of any microbial intracellular compound allowing less unit operation steps for cellular disruption.

An overview of cell disruption methods for intracellular biomolecules recovery.

Bacteria, yeast, and microalgae are sources of biomolecules such as enzymes, lipids, pigments, organic acids and, proteins for industrial application. These high-added-value biomolecules are often intracellularly bioaccumulated, and their recovery involves several downstream processes, in which the most crucial stage is the disruption of the cell wall. The choice of the method influences the further downstream steps and, consequently, its complexity and cost. In this review, severe and gentle methods currently used for disruption or permeabilization of bacteria, yeast, and microalgae were discussed based on their principle, application, and feasibility. Also, recent studies regarding the microbial cell disruption were presented in order to facilitate the choice of the more effective method. Some factors such as cell wall composition, nature of biomolecule, purity degree, scalability, and energy input are necessary to be considered on selecting the most appropriate disruption method. The severe methods, such as high pressure-homogenization, and ultrasonication present higher yield, lower cost, and feasibility to scale-up when compared to the gentle methods. However, in order to achieve a higher recovery yield, further studies must focus on the optimization of operational parameters and on the combination of severe and gentle methods.

A Rapid Extraction Method for mammalian cell cultures, suitable for quantitative immunoblotting analysis of proteins, including phosphorylated GCN2 and eIF2α.

Many studies require the detection and relative quantitation of proteins from cell culture samples using immunoblotting. Limiting factors are the cost of protease inhibitors, the time required to break cells and generate samples, as well as the high risk of protein loss during cell breakage procedures. In addition, a common problem is the viscosity of lysed samples due to the released genomic DNA. As a consequence, the DNA needs to be broken down prior to denaturing polyacrylamide protein gel electrophoresis (SDS-PAGE), e.g. by passing the sample through a syringe gauge needle, sonication, or DNase treatment. In a quest to find a more cost-effective, fast, and yet robust procedure, we found that cell lysis, protein denaturation, and DNA fragmentation can be done in only two steps: harvesting followed by a simple non-laborious 2nd step. Similarly to many pre-existing cell breakage procedures, in our Rapid Protein Extraction (RPE) method, proteins liberated from cells are immediately exposed to a denaturing environment. However, advantages of our method are: •No breaking buffer is needed, instead proteins are liberated directly into the denaturing protein loading buffer used for SDS-PAGE. Consequently, our RPE method does not require any expensive inhibitors.•The RPE method does not involve post-lysis centrifugation steps; instead all cell material is dissolved during the 2nd step, the mixing-heat-treatment step which is new to this method. This prevents potential protein loss that may occur during centrifugation. In addition, this 2nd step simultaneously shears the genomic DNA, making an additional step for DNA fragmentation unnecessary.•The generated samples are suitable for high-quality quantitative immunoblotting. With our RPE method we successfully quantified the phosphorylated forms of protein kinase GCN2 and its substrate eIF2α. In fact, the western signals were stronger and with less background, as compared to samples generated with a pre-existing method.

In vivo assay to identify bacteria with ß-glucosidase activity

Background: ß-Glucosidase assay is performed with purified or semipurified enzymes extracted from cell lysis. However, in screening studies, to find bacteria with ß-glucosidase activity among many tested bacteria, a fast method without cell lysis is desirable. In that objective, we report an in vivo ß-glucosidase assay as a fast method to find a ß-glucosidase producer strain. Results: The method consists in growing the strains for testing in a medium supplemented with the artificial substrate p-nitrophenyl-ß-glucopyranoside (pNPG). The presence of ß-glucosidases converts the substrate to p-nitrophenol (pNP), a molecule that can be easily measured in the supernatant spectrophotometrically at 405 nm. The assay was evaluated using two Bifidobacterium strains: Bifidobacterium longum B7254 strain that lacks ß-glucosidase activity and Bifidobacterium pseudocatenulatum B7003 strain that shows ß-glucosidase activity. The addition of sodium carbonate during pNP measurement increases the sensitivity of pNP detection and avoids the masking of absorbance by the culture medium. Furthermore, we show that pNP is a stable enzymatic product, not metabolized by bacteria, but with an inhibitory effect on cell growth. The ß-glucosidase activity was measured as units of enzyme per gram per minute per dry cell weight. This method also allowed the identification of Lactobacillus strains with higher ß-glucosidase activity among several lactobacillus species. Conclusion: This in vivo ß-glucosidase assay can be used as an enzymatic test on living cells without cell disruption. The method is simple, quantitative, and recommended, especially in studies screening for bacteria not only with ß-glucosidase activity but also with high ß-glucosidase activity.

Soil pretreatment and fast cell lysis for direct polymerase chain reaction from forest soils for terminal restriction fragment length polymorphism analysis of fungal communities

Abstract Humic substances in soil DNA samples can influence the assessment of microbial diversity and community composition. Using multiple steps during or after cell lysis adds expenses, is time-consuming, and causes DNA loss. A pretreatment of soil samples and a single step DNA extraction may improve experimental results. In order to optimize a protocol for obtaining high purity DNA from soil microbiota, five prewashing agents were compared in terms of their efficiency and effectiveness in removing soil contaminants. Residual contaminants were precipitated by adding 0.6 mL of 0.5 M CaCl2. Four cell lysis methods were applied to test their compatibility with the pretreatment (prewashing + Ca2+ flocculation) and to ultimately identify the optimal cell lysis method for analyzing fungal communities in forest soils. The results showed that pretreatment with TNP + Triton X-100 + skim milk (100 mM Tris, 100 mM Na4P2O7, 1% polyvinylpyrrolidone, 100 mM NaCl, 0.05% Triton X-100, 4% skim milk, pH 10.0) removed most soil humic contaminants. When the pretreatment was combined with Ca2+ flocculation, the purity of all soil DNA samples was further improved. DNA samples obtained by the fast glass bead-beating method (MethodFGB) had the highest purity. The resulting DNA was successfully used, without further purification steps, as a template for polymerase chain reaction targeting fungal internal transcribed spacer regions. The results obtained by terminal restriction fragment length polymorphism analysis indicated that the MethodFGB revealed greater fungal diversity and more distinctive community structure compared with the other methods tested. Our study provides a protocol for fungal cell lysis in soil, which is fast, convenient, and effective for analyzing fungal communities in forest soils.

Soil pretreatment and fast cell lysis for direct polymerase chain reaction from forest soils for terminal restriction fragment length polymorphism analysis of fungal communities

Humic substances in soil DNA samples can influence the assessment of microbial diversity and community composition. Using multiple steps during or after cell lysis adds expenses, is time-consuming, and causes DNA loss. A pretreatment of soil samples and a single step DNA extraction may improve experimental results. In order to optimize a protocol for obtaining high purity DNA from soil microbiota, five prewashing agents were compared in terms of their efficiency and effectiveness in removing soil contaminants. Residual contaminants were precipitated by adding 0.6 mL of 0.5 M CaCl2. Four cell lysis methods were applied to test their compatibility with the pretreatment (prewashing + Ca2+ flocculation) and to ultimately identify the optimal cell lysis method for analyzing fungal communities in forest soils. The results showed that pretreatment with TNP + Triton X-100 + skim milk (100 mM Tris, 100 mM Na4P2O7, 1% polyvinylpyrrolidone, 100 mM NaCl, 0.05% Triton X-100, 4% skim milk, pH 10.0) removed most soil humic contaminants. When the pretreatment was combined with Ca2+ flocculation, the purity of all soil DNA samples was further improved. DNA samples obtained by the fast glass bead-beating method (MethodFGB) had the highest purity. The resulting DNA was successfully used, without further purification steps, as a template for polymerase chain reaction targeting fungal internal transcribed spacer regions. The results obtained by terminal restriction fragment length polymorphism analysis indicated that the MethodFGB revealed greater fungal diversity and more distinctive community structure compared with the other methods tested. Our study provides a protocol for fungal cell lysis in soil, which is fast, convenient, and effective for analyzing fungal communities in forest soils.(AU)

Soil pretreatment and fast cell lysis for direct polymerase chain reaction from forest soils for terminal restriction fragment length polymorphism analysis of fungal communities.

Humic substances in soil DNA samples can influence the assessment of microbial diversity and community composition. Using multiple steps during or after cell lysis adds expenses, is time-consuming, and causes DNA loss. A pretreatment of soil samples and a single step DNA extraction may improve experimental results. In order to optimize a protocol for obtaining high purity DNA from soil microbiota, five prewashing agents were compared in terms of their efficiency and effectiveness in removing soil contaminants. Residual contaminants were precipitated by adding 0.6mL of 0.5M CaCl2. Four cell lysis methods were applied to test their compatibility with the pretreatment (prewashing+Ca2+ flocculation) and to ultimately identify the optimal cell lysis method for analyzing fungal communities in forest soils. The results showed that pretreatment with TNP+Triton X-100+skim milk (100mM Tris, 100mM Na4P2O7, 1% polyvinylpyrrolidone, 100mM NaCl, 0.05% Triton X-100, 4% skim milk, pH 10.0) removed most soil humic contaminants. When the pretreatment was combined with Ca2+ flocculation, the purity of all soil DNA samples was further improved. DNA samples obtained by the fast glass bead-beating method (MethodFGB) had the highest purity. The resulting DNA was successfully used, without further purification steps, as a template for polymerase chain reaction targeting fungal internal transcribed spacer regions. The results obtained by terminal restriction fragment length polymorphism analysis indicated that the MethodFGB revealed greater fungal diversity and more distinctive community structure compared with the other methods tested. Our study provides a protocol for fungal cell lysis in soil, which is fast, convenient, and effective for analyzing fungal communities in forest soils.

Production, purification and characterization of recombinant human antithrombin III by Saccharomyces cerevisiae

Background: Antithrombin III (ATIII) is a protein that inhibits abnormal blood clots (or coagulation) by breaking down thrombin and factor Xa. ATIII helps to keep a healthy balance between hemorrhage and coagulation. The present work demonstrated the production, purification and characterization of recombinant human antithrombin (rhAT) from yeast Saccharomyces cerevisiae BY4741 was demonstrated. After expression of rhAT by S. cerevisiae, the biomass and rhAT concentration were analyzed through fed-batch fermentation process. Results: In fed-batch fermentation, the biomass (maximum cell dry weight of 11.2 g/L) and rhAT concentration (312 mg/L) of the expressed rhAT were achieved at 84 h of cultivation time. The maximum cell lysis efficiency (99.89%) was found at 8 s sonication pulse and 7 mL lysis buffer volume. The rhAT protein solution was concentrated and partially purified using cross-flow filtration with the recovery yield and purity of 95 and 94%, respectively. The concentrated solution was further purified by the single step ion exchange chromatography with the recovery yield and purity of 55 and >98%, respectively. The purified rhAT was characterized by various analytical techniques, such as RP-HPLC, FT-IR, CD, SDS-PAGE, western blotting, and Liquid chromatography mass spectrometry (LC-MS) analysis. The biological activity of rhAT was analyzed as heparin cofactor to meet the therapeutic grade applications. Conclusions: The simple, cost-effective and economically viable nature of the process used in the present study for the production of rhAT will be highly beneficial for the healthcare sector. This may also be used to produce other value-added therapeutic recombinant proteins expressed in S. cerevisiae, with greater effectiveness and ease.

Beta-1,3 Glucanases e quitinases: aplicação na lise de leveduras e inibição de fungos / Beta-1,3 glucanases and chitinases: application in the yeast cell lysis and fungi inhibition

Objetivou-se, no presente trabalho, a aplicação de β-1,3 glucanases e quitinases da linhagem Cellulosimicrobium cellulans 191 na lise de leveduras e inibição de fungos, respectivamente. O delineamento experimental mostrou que as melhores condições para a lise de Saccharomyces cerevisiae KL-88 pela β-1,3 glucanase foi pH 6,5 e 35ºC. As células de leveduras incubadas por 10 h em frascos sem agitação mostraram-se mais susceptíveis à lise pela ação da enzima. Foi obtido maior lise da levedura quando a suspensão de células foi submetida ao tratamento com β-1,3 glucanase e cisteína 1mM. A enzima invertase intracelular ou ligada à célula de S. cerevisiae KL-88 e K. marxianus NCYC 587 foi extraída após tratamento da suspensão celular com β-1,3 glucanase, sendo que o tratamento prévio das leveduras com a enzima aumentou a susceptibilidade das células à lise com ultra-som. A preparação de quitinase foi capaz de formar halos de inibição de alguns fungos.

The aim of this work was the application of β-1,3 glucanases and chitinases by Cellulosimicrobium cellulans 191 strain on yeast cell lysis and fungi inhibition, respectively. The experimental design study showed that the best conditions to Saccharomyces cerevisiae KL-88 lysis by β-1,3 glucanase extract were pH 6,5 and 35ºC. This study also demonstrated that the yeast cells were more susceptible to lysis after 10 h of cultivation in flasks without agitation. Lysis activity was increased when S. cerevisiae KL-88 cell suspension was treated with β-1,3 glucanase and cystein 1mM. The enzyme invertase of S. cerevisiae KL-88 and Kluyveromyces marxianus NCYC 587 was extracted after treatment of cell suspension with β-1,3 glucanase and the previous treatment of yeasts with the enzyme, increased the susceptibility to lysis when ultrasonic treatment was used. The chitinase presented growth inhibition halos for some of the fungi.