Development and optimization of electrosprayed vitamin C - chitosan nanoparticle: A CCD-RSM approach and characterization of bioactive encapsulant.

Electrospraying for Vitamin C (VC) encapsulation in Chitosan (Cs) nanoparticles was investigated and particle size, zeta potential, loading capacity (LC%) and encapsulation efficiency (EE%) were examined. Cs concentration (1-2% w/v) and voltage (21-25 kV) were varied with VC (0.25-0.75 w/w Cs). Twenty experiments in a face-centered CCD-RSM design were evaluated. ANOVA suggested voltage and Cs concentration as significant factors for particle size and VC content affected zeta, LC and EE%. RSM proposed optimum processing parameter at 2% Cs, 0.746 VC: Cs mass ratio and 21 kV voltage with 251.1 ± 59.03 nm particle size, 36.6% LC and an EE of 85.42%. Encapsulated particles were subjected to release behaviour, antioxidant property and analyzed through FTIR, DSC and XRD. Encapsulated VC had better antibacterial properties than Cs nanoparticles, and comparable VC retention in apple juice showed its effectiveness. Overall, nanoencapsulation of VC using electrospraying was successfully developed to be used in numerous food processing applications.

Development of transgenic Paulownia trees expressing antimicrobial thionin genes for enhanced resistance to fungal infections using chitosan nanoparticles.

There is an increasing focus on genetically altering Paulownia trees to enhance their resistance against fungal infections, given their rapid growth and quality wood production. The aim of this research was to establish a technique for incorporating two antimicrobial thionin genes, namely thionin-60 (thio-60) and thionin-63 (thio-63), into Paulownia tomentosa and Paulownia hybrid 9501 through the utilization of chitosan nanoparticles. The outcomes revealed the successful gene transfer into Paulownia trees utilizing chitosan nanoparticles. The effectiveness of thionin proteins against plant pathogens Fusarium and Aspergillus was examined, with a specific focus on Fusarium equiseti due to limited available data. In non-transgenic Paulownia species, the leaf weight inhibition percentage varied from 25 to 36 %, whereas in transgenic species, it ranged from 22 to 7 %. In general, Paulownia species expressing thio-60 displayed increased resistance to F. equiseti, while those expressing thio-63 exhibited heightened resistance to A. niger infection. The thionin proteins displayed a strong affinity for the phospholipid bilayer of the fungal cell membrane, demonstrating their capability to disrupt its structure. The transgenic plants created through this technique showed increased resistance to fungal infections. Thionin-60 demonstrated superior antifungal properties in comparison to thio-63, being more effective at disturbing the fungal cell membrane. These findings indicate that thio-60 holds potential as a novel antifungal agent and presents a promising approach for enhancing the antimicrobial traits of genetically modified Paulownia trees.

Quality by design (QbD) approach-based development of optimized nanocarrier to achieve quality target product profile (QTPP)-targeted lymphatic delivery.

Background.Insulin, commonly used for diabetes treatment, needs better ways to improve its effectiveness and safety due to its challenges with poor permeability and stability. Various system has been developed for oral peptide delivery. The non-targeted system can prevent gastric and enzymatic degradation of peptides but cannot increase the bulk transport of peptides across the membrane. However, the non-selectivity is the limitation of the existing system. Numerous carbohydrate-binding receptors overexpressed on intestinal macrophage cells (M-cells) of gut-associated lymphoid tissue. It is the most desirable site for receptor-mediated endocytosis and lymphatic drug delivery of peptides.Objective. The prime objective of the study was to fabricate mannose ligand conjugated nanoparticles (MNPs) employing a quality-by-design approach to address permeability challenges after oral administration. Herein, the study's secondary objective of this study is to identify the influencing factor for producing quality products. Considering this objective, the Lymphatic uptake of NPs was selected as a quality target product profile (QTPP), and a systematic study was conducted to identify the critical formulation attributes (CFAs) and critical process parameters (CPP) influencing critical quality attributes (CQAs). Mannosylated Chitosan concentrations (MCs) and TPP concentrations were identified as CFAs, and stirring speed was identified as CPP.Methods. MNPs were prepared by the inotropic gelation method and filled into the enteric-coated capsule to protect from acidic environments. The effect of CFAs and CPP on responses like particle size (X) and entrapment (Y) was observed by Box-Behnken design (BBD). ANOVA statistically evaluated the result to confirm a significant level (p< 0.05). The optimal conditions of NPs were obtained by constructing an overlay plot and determining the desirability value. HPLC and zeta-seizer analysis characterized the lyophilized NPs. Cell-line studies were performed to confirm the safety and M-cell targeting of NPs to enhance Insulin oral bioavailability.Results. The morphology of NPs was revealed by SEM. The developed NPs showed a nearly oval shape with the average size, surface potential, and % drug entrapment were 245.52 ± 3.37 nm, 22.12 ± 2.13 mV, and 76.15 ± 1.3%, respectively. MTT assay result exhibited that MNPs safe and Confocal imaging inference that NPs selectively uptake by the M-cell.Conclusion. BBD experimental design enables the effective formulation of optimized NPs. The statistical analysis estimated a clear assessment of the significance of the process and formulation variable. Cell line study confirms that NPs are safe and effectively uptake by the cell.

Chitosan-nanoparticle-based oral Salmonella enteritidis subunit vaccine elicits cross-protection against Salmonella typhimurium in broilers.

Non-typhoidal Salmonella infection is a significant health and economic burden in poultry industry. Developing an oral vaccine to induce robust mucosal immunity in the intestines of birds, especially cross protection against different Salmonella serotypes is challenging. Therefore, a potent oral vaccine platform that can mitigate different serotypes of Salmonella is warranted for the poultry industry. We reported earlier that the Salmonella enteritidis (SE) immunogenic outer membrane proteins (OMPs) and flagellin (FLA) entrapped in mannose chitosan nanoparticles (OMPs-FLA-mCS NPs) administered prime-boost (d-3 and 3-wk later) by oral inoculation elicits mucosal immunity and reduces challenge SE colonization by over 1 log10 CFU in birds. In this study, we sought to evaluate whether the SE antigens containing OMPs-FLA-mCS NPs vaccine induces cross-protection against Salmonella typhimurium (ST) in broilers. Our data indicated that the OMPs-FLA-mCS NPs vaccine induced higher cross-protective antibody responses compared to commercial Poulvac ST vaccine (contains a modified-live ST bacterium). Particularly, OMPs-FLA-mCS-NP vaccine elicited OMPs and FLA antigens specific increased production of secretory IgA and IgY antibodies in samples collected at both post-vaccination and post-challenge timepoints compared to commercial vaccine group. Notably, the vaccine reduced the challenge ST bacterial load by 0.8 log10 CFU in the cecal content, which was comparable to the outcome of Poulvac ST vaccination. In conclusion, our data suggested that orally administered OMPs-FLA-mCS-NP SE vaccine elicited cross protective mucosal immune responses against ST colonization in broilers. Thus, this candidate vaccine could be a viable option replacing the existing both live and killed Salmonella vaccines for birds.

Microfluidic Synthesis of Scalable Layer-by-Layer Multiple Antigen Nano-Delivery Platform for SARS-CoV-2 Vaccines.

The COVID-19 outbreak was a global pandemic with wide-ranging healthcare implications. Although several mRNA-based vaccines delivered using lipid nanoparticles (LNP) have been approved and demonstrated efficacy at reducing the severity and spread of infection, continued rapid viral evolution and disadvantages currently associated with LNP delivery vehicles (such as toxicity) are driving the design of next-generation SARS-CoV-2 vaccines. Herein, we describe the development of a trimethylated chitosan-based nanoparticle layer-by-layer (LbL) delivery platform for multiple antigens as a scalable and safe COVID-19 vaccine, known as, "LbL-CoV19". These vaccine candidates have been demonstrated to be biocompatible, safe, and effective at stimulating both humoral and cellular responses for protection in preclinical studies. Preliminary results also indicate that LbL-CoV19 can potentially achieve rapid, long-lasting, and broad protection against the SARS-CoV-2 challenge. The "plug-and-play" platform technology is well suited to preparedness for future pandemics and disease outbreaks.

Effect of final irrigation protocols with chitosan nanoparticle and genipin on dentine against collagenase degradation: An ex-vivo study.

AIM: Endodontic irrigants may affect the mechanical and chemical properties of dentine. This study evaluated the effects of various final irrigation protocols including the use of chitosan nanoparticle (CSnp) and cross-linking with genipin on the (1) mechanical and (2) chemical properties of dentine against enzymatic degradation. METHODOLOGY: CSnp was synthesized and characterized considering physiochemical parameters and stability. The root canals of 90 single-rooted teeth were prepared and irrigated with NaOCl. Dentine discs were obtained and divided into groups according to the following irrigation protocols: Group NaOCl+EDTA, Group NaOCl+CSnp, Group NaOCl+EDTA+CSnp, Group NaOCl+CSnp+Genipin, Group NaOCl+EDTA+CSnp+Genipin and Group distilled water. (1) Mechanical changes were determined by microhardness analysis using Vickers-tester. (2) Chemical changes were determined by evaluating molecular and elemental compositions of dentine using Fourier transform infrared spectroscopy (FTIR) analysis and scanning electron microscope (SEM)/energy dispersive X-ray spectroscopy (EDS) analysis, respectively. All analyses were repeated after the discs were kept in collagenase for 24 h. Data were analysed with repeated measures analysis of variance and Bonferroni correction for microhardness analysis, and Kruskal-Wallis and Wilcoxon tests for FTIR and SEM/EDS analyses (p = .05). RESULTS: (1) Collagenase application did not have a negative effect on microhardness only in Group NaOCl+EDTA+CSnp+Genipin when compared with the post-irrigation values (p > .05). Post-collagenase microhardness of Group NaOCl+EDTA+CSnp and Group NaOCl+CSnp+Genipin was similar to the initial microhardness (p > .05). (2) After collagenase, Amide III/ PO 4 3 - ratio presented no change in Group NaOCl+EDTA+CSnp, Group NaOCl+CSnp+Genipin and Group NaOCl+EDTA+CSnp+Genipin (p > .05), while decreased in other groups (p < .05). Collagenase did not affect CO 3 2 - / PO 4 3 - ratio in the groups (p > .05). There were no changes in the groups in terms of elemental level before and after collagenase application (p > .05). CONCLUSIONS: CSnp and genipin positively affected the microhardness and molecular composition of dentine. This effect was more pronounced when CSnp was used after EDTA.

In vitro and In vivo Effects of Ethanolic Extract of Fumaria parviflora Lam. Embedded in Chitosan Nanoparticles Against Leishmania major.

INTRODUCTION: Fumaria has been traditionally used to treat skin damages due to anti-inflammatory properties. In the present study, we evaluated the effect of the ethanolic extract of Fumaria parviflora Lam. (F. parviflora) against Leishmania major (L. major) using chitosan biopolymer drug delivery system both In vitro and In vivo models. MATERIALS AND METHODS: The ethanolic extract of F. parviflora was analyzed by HPLC to determine its active ingredients content. The extract was then loaded on chitosan nanoparticles (CNPs). The parasite was treated with various concentrations of the ethanolic extract, CNPs and CNPs loaded with F. parviflora extract (CNPs@ F. parviflora). The size of lesions of treated mice were measured on a weekly basis. The parasite burden was evaluated 8 weeks after treatment. RESULTS: The HPLC analysis showed the presence of Fumaric acid at a high concentration. The percentage of the drug released from CNPs@ F. parviflora within 24 and 72 h were 65% and 90% respectively. The results showed that F. parviflora extract and CNPs@ F. parviflora caused 84% and 96% growth inhibition of L. major promastigotes as revealed by Neubauer chamber counting and MTT test respectively. The IC50 values of F. parviflora extract and CNPs@ F. parviflora were 450 and 68.4 µg/ml respectively. In amastigote assay, the best results showed in CNPs@ F. parviflora that only 2% of macrophages were infected with amastigotes. In vivo experiments for mice treated with F. parviflora and CNPs @ F. parviflora in comparison to control group showed a significant reduction (P < 0.05) in the mean diameter of the lesions (2.3 and 1.72 mm and 9.91 mm respectively). CONCLUSION: The ethanolic extract of F. parviflora both as standalone and loaded in CNPs showed promising inhibitory effects against L. major both upon In vitro and In vivo experimentation as well as therapeutic effects for wound healing in infected mice.

The effect of the enzymes trypsin and DNase I on the antimicrobial efficiency of root canal irrigation solutions.

The purpose of this study was to evaluate the antibacterial efficacy of using 2.5% NaOCl, 2% chlorhexidine (CHX), Irritrol, and chitosan-coated silver nanoparticles (AgCNPs) alone or in combination with deoxyribonuclease I (DNase I) and trypsin pre-enzyme applications in dentin samples contaminated with Enterococcus faecalis (E. faecalis) by CLSM. 144 dentin blocks with confirmed E. faecalis biofilm formation were divided randomly according to the irrigation protocol (n = 12): NaOCl, CHX, Irritrol, AgCNPs, trypsin before NaOCl, CHX, Irritrol, AgCNPs, and DNase I before NaOCl, CHX, Irritrol, AgCNPs. Dentin blocks were stained with the Live/Dead BacLight Bacterial Viability Kit and viewed with CLSM after irrigation applications. The percentage of dead and viable bacteria was calculated using ImageJ software on CLSM images. At a significance level of p < 0.05, the obtained data were analyzed using one-way Anova and post-hoc Tukey tests. In comparison with NaOCl, CHX had a higher percentage of dead bacteria, both when no pre-enzyme was applied and when DNase I was applied as a pre-enzyme (p < 0.05). There was no difference in the percentage of dead bacteria between the irrigation solutions when trypsin was applied as a pre-enzyme (p > 0.05). AgCNPs showed a higher percentage of dead bacteria when trypsin was applied as a pre-enzyme compared to other irrigation solutions (p < 0.05), while the pre-enzyme application did not affect the percentage of dead bacteria in NaOCl, CHX, and Irritrol (p > 0.05). No irrigation protocol tested was able to eliminate the E. faecalis biofilm. While the application of trypsin as a pre-enzyme improved the antimicrobial effect of AgCNPs, it did not make any difference over other irrigation solutions.

Starch biopolymer films containing chitosan nanoparticles: A review.

Starch biopolymer films incorporated with chitosan nanoparticles (CNP) or starch/CNP films are promising alternatives to non-degradable food packaging materials. The films can be utilized for active food packaging applications because CNP exhibits antimicrobial and antioxidant properties, which can improve food shelf-life. Nonetheless, knowledge of the effects of CNP inclusion on the properties of starch films is not fully elucidated. This paper reviews the influences of various concentrations of CNP, sizes of CNP, and other additives on the mechanical, thermal, barrier, antimicrobial, antioxidant, biodegradability, and cytotoxicity properties of starch/CNP films as well as the mechanisms involved in relation to food packaging applications. The usage of starch/CNP films for active food packaging can help to reduce environmental issues and contribute to food safety and security.

In vitro and functional investigation reveals the curative effect of thymoquinone from black cumin-loaded chitosan nanoparticles on streptozotocin induced paediatric diabetes.

Diabetic ketoacidosis (DKA) is regarded to be a communal complication of both type 1 and type 2 diabetes mellitus in children and adolescents. Successful therapy of DKA in children requires prompt diagnosis, strict monitoring of medical indicators, and prompt action. Thymoquinone (Tq) from black cumin loaded chitosan nanoparticles (ChNPs) intend to assess an effective agent to overcome this problem. XRD, FTIR, SEM, and TEM were used in the physicochemical analysis. Enzymatic activity of α-amylase and α-glucosidase was used in in vitro tests of anti-diabetic efficacy. Protecting insulin against enzyme breakdown is a crucial part of the insulin delivery mechanism. In the STZ-induced diabetes RIN-5F cell line, the anti-apoptotic capability of Tq-ChNPs was demonstrated through the NF-κB mediated apoptotic pathway. The combination of thymoquinone and chitosan NPs demonstrated that a wide variety of incredibly effective substances to elevate their curative effects, thus contributing to the growth of clinical and pharmaceutical fields.

Therapeutic effect of 5-ASA and hesperidin-loaded chitosan/Eudragit® S100 nanoparticles as a pH-sensitive carrier for local targeted drug delivery in a rat model of ulcerative colitis.

Ulcerative colitis (UC) is an idiopathic disease characterized by colonic mucosal tissue destruction secondary to an excessive immune response. We synthesized pH-sensitive cross-linked chitosan/Eudragit® S100 nanoparticles (EU S100/CS NPs) as carriers for 5-aminosalicylic acid (5-ASA) and hesperidin (HSP), then conducted in-vitro and in-vivo studies and evaluated the therapeutic effects. In-vitro analysis revealed that the 5-ASA-loaded EU S100/CS NPs and the HSP-loaded EU S100/CS NPs had smooth and curved surfaces and ranged in size between 250 and 300 nm, with a zeta potential of 32 to 34 mV. FTIR analysis demonstrated that the drugs were loaded on the nanoparticles without significant alterations. The loading capacity and encapsulation efficiency of loading 5-ASA onto EU S100/CS NPs were 25.13 % and 60.81 %, respectively. Regarding HSP, these values were 38.34 % and 77.84 %, respectively. Drug release did not occur in simulated gastric fluid (SGF), while a slow-release pattern was recorded for both drugs in simulated intestinal fluid (SIF). In-vivo macroscopic and histopathological examinations revealed that both NPs containing drugs significantly relieved the symptoms of acetic acid (AA)-induced UC in Wistar rats. We conclude that the synthesized pH-sensitive 5-ASA/EU S100/CS NPs and HSP/EU S100/CS NPs offer promise in treating UC.

Novel Chimeric Endolysin Conjugated Chitosan Nanocomplex as a Potential Inhibitor Against Gram-Positive and Gram-Negative Bacteria.

Resistance to antimicrobial agents has created potential problems in finding efficient treatments against bacteria. Thus, using new therapeutics, such as recombinant chimeric endolysin, would be more beneficial for eliminating resistant bacteria. The treatment ability of these therapeutics can be further improved if they are used with biocompatible nanoparticles like chitosan (CS). In this work, covalently conjugated chimeric endolysin to CS nanoparticles (C) and non-covalently entrapped endolysin in CS nanoparticles (NC) were effectively developed and, consequently, qualified and quantified using analytical devices, including FT-IR, dynamic light scattering, and TEM. Eighty to 150 nm and 100 nm to 200 nm in diameter were measured for CS-endolysin (NC) and CS-endolysin (C) using a TEM, respectively. The lytic activity, synergistic interaction, and biofilm reduction potency of nano-complexes were investigated on Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and Pseudomonas aeruginosa (P. aeruginosa) strains. The outputs revealed a good lytic activity of nano-complexes after 24 h and 48 h of treatment, especially in P. aeruginosa (approximately 40% cell viability after 48 h of treatment with 8 ng/mL), and potential biofilm reduction performance was attained in E. coli strains (about 70% reduction after treatment with 8 ng/mL). The synergistic interaction between nano-complexes and vancomycin was exhibited in E. coli, P. aeruginosa, and S. aureus strains at 8 ng/mL concentrations, while the synergistic effects of pure endolysin and vancomycin were not remarkable in E. coli strains. These nano-complexes would be more beneficial in suppressing the bacteria with a high level of antibiotic resistance.

Preparation and characterization of 3D bioprinted gelatin methacrylate hydrogel incorporated with curcumin loaded chitosan nanoparticles for in vivo wound healing application.

This study developed a biomimetic composite bioink consisting of gelatin methacrylate (GelMA) /chitosan nanoparticles (CSNPs) for extrusion-based 3D bioprinting. Additionally, curcumin(Cur)-loaded nanoparticles were incorporated which increased the proliferation and antibacterial activity of biomimetic skin constructs. The hydrogel, curcumin-loaded NPs, and the biocomposite was characterized chemically and physically. The results indicated proper modified gelatin with tunable physical characteristics, e.g., swelling ratio and biodegradability up to 1200 % and 25 days, respectively. In addition, the characterized CSNPs showed good distribution with a size of 370 nm and a zeta potential of 41.1 mV. We investigated the mechanical and cytocompatibility properties of chitosan nanoparticles encapsulated in hydrogel for emulating an extracellular matrix suitable for skin tissue engineering. CSNPs entrapped in GelMA (15 % w/v) exhibited controlled drug release during 5 days, which was fitted into various kinetic models to study the mass transfer mechanism behavior. Also, the composite hydrogels were effective as a barrier against both gram-positive and gram-negative bacteria at a concentration of 50 µg/ml nanoparticles in GelMA 15 %. Furthermore, the biocomposite was applied on Wistar rats for wound healing. As a result, this study provides a GelMA-NP50-Cur3 scaffold that promotes cell proliferation and decreases microbial infections in wounds.

The comparative of chitosan and chitosan nanoparticle versus ethylenediaminetetraacetic acid on the smear layer removal: A systematic review and meta-analysis of in vitro study.

The purpose of this systematic review of meta-analysis was to compare the effectiveness of removing the smearing layer using EDTA versus Chitosan (Ch) and Chitosan nanoparticles (Ch-NPs). A search was performed in four electronic databases (Web of Science, PubMed, Scopus, and Cochrane). The included studies were assessed by two reviewers using Joanna Briggs Institute's critical appraisal checklist for the quasi-experimental studies. Outcomes obtained by scanning electron microscopy (SEM) and conventional methods were presented as standardized mean differences alongside 95% confidence intervals. Seven investigations employed 212 single-root teeth. In the apical section (p = .317, 95% CI = -0.820 to 0.266, Tau2 = 0.387), middle segment (p = .914, 95% CI = -1.019 to 0.912, Tau2 = 1.027), and coronal segment (p = .277, 95% CI = -1.008 to 0.289, Tau2 = 0.378). This meta-analysis found no difference between Ch, Ch-NPs, and EDTA in removing the smear layer in the three segments. This systematic review is designed to show evidence related to the PICO question, in which our outcome is smear layer removal and not the clinical success of such a treatment. RESEARCH HIGHLIGHTS: The study aimed to compare the effectiveness of chitosan and chitosan nanoparticles with ethylenediaminetetraacetic acid (EDTA) in removing the smear layer, a layer of debris and organic material on the tooth surface, through a systematic review and meta-analysis. The removal of the smear layer is crucial for successful dental treatments, as it enhances the adhesion of restorative materials and improves the penetration of antimicrobial agents into dentinal tubules. The researchers conducted a systematic review and meta-analysis, searching various databases of electron microscopy results for relevant in vitro studies comparing the effects of chitosan or chitosan nanoparticles with EDTA on smear layer removal. The results encourage further exploration of chitosan and chitosan nanoparticles for clinical use in dentistry, while considering their specific applications and long-term effects.

Efficacy of using chitosan and chitosan nanoparticles as final irrigating solutions on smear layer removal and mineral content of intraradicular dentin.

Background: This study evaluated the effect of using chitosan, nano-chitosan, and ethylenediaminetetraacetic acid (EDTA) as final irrigating solutions on smear layer cleanliness and Ca/P ratio of dentin. Methodology: Forty-eight decoronated human single-rooted teeth were used. They were divided randomly into four groups (n = 12) based on the final irrigating solution used as follows: (a) control group (IA; n = 6) normal saline, (IB; n = 6) were left unprepared; group II - 0.2% chitosan; group III - 0.2% nano-chitosan; and group IV - 17% EDTA. Samples were prepared using ProTaper Next and irrigated with 2.6% NaOCl 5 ml after each instrument using 31-gauge needle. Final rinse was used 5 ml/3 min according to the assigned group. The specimens were prepared for evaluation. Results: Best smear layer removal was observed in group IV. No statistically significant differences (P > 0.05) were observed between the experimental groups (II, III, and IV) coronally; however, a statistically significant difference (P < 0.05) was observed between groups II and IV at middle and apical thirds. Intragroup comparison showed that apical third exhibited the highest mean smear layer score among all experimental groups. The highest mean Ca/P ratio was in the 0.2% nano-chitosan group, while the highest calcium loss was in the 17% EDTA group. Conclusions: 17% EDTA is a potent chelating agent that can successfully remove the smear layer but compromises the Ca/p ratio of dentin. However, 0.2% chitosan and its nanoparticles have comparable chelating effects and induce remineralization of the root canal dentin.

Spectroscopic study to verify the anti-hepatitis C virus (HCV) treatment through a delivery system of the sofosbuvir drug on chitosan and pycnogenol nanoparticles surface.

The target of the current study is to create a novel hybrid nanocomposite (Cs@Pyc.SOF) by combining the anti-hepatitis C virus (HCV) drug sofosbuvir with the nano antioxidant pycnogenol (Pyc) and nano biomolecules like chitosan nanoparticles (Cs NPs). The characterization procedure works to verify the creation of nanocomposite (NCP) using several different techniques. UV-Vis spectroscopy is used to measure SOF loading efficiency. The various concentrations of the SOF drug were used to determine the binding constant rate Kb, which was found to be 7.35 ± 0.95 min-1 with an 83% loading efficiency. At pH 7.4, the release rate was 80.6% after two hours and 92% after 48 h, whereas at pH 6.8, it was 29% after two hours and 94% after 48 h. After 2 and 48 h, the release rate in water was 38% and 77%, respectively. . The SRB technique for fast screening is used for the cytotoxicity test, where the investigated composites show a safety status and high viability against the examined cell line. The cytotoxicity assay of the SOF hybrid materials has been identified with cell lines like mouse normal liver cells (BNL). So, Cs@Pyc.SOF was recommended as a substitute medication for the therapy of HCV, but the results need clinical studies.

All-in-one glycol chitosan nanoparticles for co-delivery of doxorubicin and anti-PD-L1 peptide in cancer immunotherapy.

Synergistic immunotherapy of immune checkpoint blockade (ICB) and immunogenic cell death (ICD) has shown remarkable therapeutic efficacy in various cancers. However, patients show low response rates and undesirable outcomes to these combination therapies owing to the recycling mechanism of programmed death-ligand 1 (PD-L1) and the systemic toxicity of ICD-inducing chemotherapeutic drugs. Herein, we propose all-in-one glycol chitosan nanoparticles (CNPs) that can deliver anti-PD-L1 peptide (PP) and doxorubicin (DOX) to targeted tumor tissues for a safe and more effective synergistic immunotherapy. The PP-CNPs, which are prepared by conjugating ᴅ-form PP (NYSKPTDRQYHF) to CNPs, form stable nanoparticles that promote multivalent binding with PD-L1 proteins on the targeted tumor cell surface, resulting in effective lysosomal PD-L1 degradation in contrast with anti-PD-L1 antibody, which induces recycling of endocytosed PD-L1. Consequently, PP-CNPs prevent subcellular PD-L1 recycling and eventually destruct immune escape mechanism in CT26 colon tumor-bearing mice. Moreover, the ICD inducer, DOX is loaded into PP-CNPs (DOX-PP-CNPs) for synergistic ICD and ICB therapy, inducing a large number of damage-associated molecular patterns (DAMPs) in targeted tumor tissues with minimal toxicity in normal tissues. When the DOX-PP-CNPs are intravenously injected into CT26 colon tumor-bearing mice, PP and DOX are efficiently delivered to the tumor tissues via nanoparticle-derived passive and active targeting, which eventually induce both lysosomal PD-L1 degradation and substantial ICD, resulting in a high rate of complete tumor regression (CR: 60%) by a strong antitumor immune response. Collectively, this study demonstrates the superior efficacy of synergistic immunotherapy using all-in-one nanoparticles to deliver PP and DOX to targeted tumor tissues.

Ultrasound-assisted formation of chitosan-glucose Maillard reaction products to fabricate nanoparticles with enhanced antioxidant activity.

The influence of ultrasonic processing parameters including reaction temperature (60, 70 and 80 °C), time (0, 15, 30, 45 and 60 min) and amplitude (70, 85 and 100%) on the formation and antioxidant activity of Maillard reaction products (MRPs) in a solution of chitosan and glucose (1.5 wt% at mass ratio of 1:1) was investigated. Selected chitosan-glucose MRPs were further studied to determine the effects of solution pH on the fabrication of antioxidative nanoparticles by ionic crosslinking with sodium tripolyphosphate. Results from FT-IR analysis, zeta-potential determination and color measurement indicated that chitosan-glucose MRPs with improved antioxidant activity were successfully produced using an ultrasound-assisted process. The highest antioxidant activity of MRPs was observed at the reaction temperature, time and amplitude of 80 °C, 60 min and 70%, respectively, with âˆ¼ 34.5 and ∼20.2 µg Trolox mL-1 for DPPH scavenging activity and reducing power, respectively. The pH of both MRPs and tripolyphosphate solutions significantly influenced the fabrication and characteristics of the nanoparticles. Using chitosan-glucose MRPs and tripolyphosphate solution at pH 4.0 generated nanoparticles with enhanced antioxidant activity (∼1.6 and âˆ¼ 1.2 µg Trolox mg-1 for reducing power and DPPH scavenging activity, respectively) with the highest percentage yield (∼59%), intermediate particle size (∼447 nm) and zeta-potential âˆ¼ 19.6 mV. These results present innovative findings for the fabrication of chitosan-based nanoparticles with enhanced antioxidant activity by pre-conjugation with glucose via the Maillard reaction aided by ultrasonic processing.

Chitosan based sorafenib tosylate loaded magnetic nanoparticles: Formulation and in-vitro characterization.

Biocompatible magnetic nanoparticles are used for various biomedical applications. This study reported the development of nanoparticles with magnetic properties by embedding magnetite particles in the drug-loaded, crosslinked matrix of chitosan. Sorafenib tosylate-loaded magnetic nanoparticles were prepared by a modified ionic-gelation method. Particle size, zeta potential, polydispersity index, and entrapment efficiency of nanoparticles were in the range of 95.6 ± 3.4 nm to 440.9 ± 7.3 nm, 12.8 ± 0.8 mV to 27.3 ± 1.1 mV, 0.289 ± 0.011 to 0.571 ± 0.011, and 54.36 ± 1.26 % to 79.67 ± 1.40 %, respectively. The XRD spectrum of formulation CMP-5 confirmed the amorphous nature of the loaded drug in nanoparticles. TEM image confirmed the spherical shape of nanoparticles. Atomic force microscopic image of formulation CMP-5 indicated a mean surface roughness of 10.3597 nm. The magnetization saturation of formulation CMP-5 was 24.74 emu/g. Electron paramagnetic resonance spectroscopy revealed that formulation CMP-5's g-Lande's factor was 4.27, which was extremely near to the 4.30 (usual for Fe3+ ions). Residual paramagnetic Fe3+ ions may be responsible for paramagnetic origin. The data suggests superparamagnetic nature of particles. Formulations released 28.66 ± 1.22 % to 53.24 ± 1.95 % and 70.13 ± 1.72 % to 92.48 ± 1.32 % of the loaded drug after 24 h in pH 6.8 and pH 1.2, respectively. The IC50 value of formulation CMP-5 was 54.75 µg/mL in HepG2 (human hepatocellular carcinoma cell lines).

Multi-functional chitosan-based nanoparticles for drug delivery: Recent advanced insight into cancer therapy.

Cancer therapy continues to be a major global concern, with conventional treatments suffering from low efficacy, untargeted drug delivery, and severe side effects. Recent research in nanomedicine suggests that nanoparticles' unique physicochemical properties can be leveraged to surmount the limitations of conventional cancer treatment. Chitosan-based nanoparticles have gained significant attention due to their high drug-carrying capacity, non-toxicity, biocompatibility, and long circulation time. Chitosan is utilized in cancer therapies as a carrier to accurately deliver active ingredients to tumor sites. This review focuses on clinical studies and current market offerings of anticancer drugs. The unique nature of tumor microenvironments presents new opportunities for the development of smart drug delivery systems, and this review explores the design and preparation of chitosan-based smart nanoparticles. Further, we discuss the therapeutic efficacies of these nanoparticles based on various in vitro and in vivo findings. Finally, we present a forward-looking perspective on the challenges and prospects of chitosan-based nanoparticles in cancer therapy, intending to provide fresh ideas for advancing cancer treatment strategies.