Diterpenes and triterpenes show potential as biocides against pathogenic fungi and oomycetes: a screening study.

OBJECTIVES: The aim was to screen di- and triterpenes as potential biocides against fungal pathogens (Alternaria sp., Fusarium avenaceum, F. sambucinum, Botrytis cinerea, Botryotina fuckeliana, Mycocentrospora acerina, Cylindrocarpon sp.) and oomycetes (Phytophthora cactorum, P. fragariae). Results We measured the antifungal activity of terpenes by estimating the growth area, ergosterol content and level of lipid peroxidation. Fungi and oomycetes were grown on solid media in Petri dishes. As a positive control, we used a common synthetic fungicide, fosetyl-Al. Di- and triterpenes showed promising potential as biocides against most of the studied species. The responses of fungi and oomycetes were dependent on the specific type of terpenes and identity of the fungi. Compared to synthetic fungicide, terpenes were equally effective as antifungal agents and even more effective for some species, especially for oomycetes. The terpene mode of action includes inhibition of ergosterol synthesis and increased lipid peroxidation. Conclusions Di- and triterpenes, natural compounds that are very abundant in northern countries, are excellent candidates for biocides.

Stradivari's Varnish Revisited: Feature Improvements Using Chemical Modification.

The most widespread varnish formulations used by master violin-makers of the "Italian Golden Age", including Antonio Stradivari, were based on mixtures of siccative oils (e.g., linseed oil) and natural resins (e.g., colophony). Similar formulations are still used for the finish of contemporary instruments. Although most precious violins made by Stradivari and other Cremonese Masters are kept in museums, several instruments are still played and their finish may undergo deterioration due to contact with the players. Moreover, the decay of the traditional varnish may occur due to mechanical stress and natural aging caused by environmental agents (e.g., exposure to uncontrolled light, humidity, and temperature changes). The main aim of this research work is to investigate the possible improvement of varnish resistance to the decay induced by different aging processes. For this purpose, the traditional varnish (linseed oil/colophony 3:1 w/w) was recreated in the laboratory following an ancient recipe and then it was functionalized with a cross-linking agent (3-Glycidyloxypropyltrimethoxysilane, GLYMO). Plain and functionalized varnishes underwent artificial aging (UV light, temperature, and humidity variations), and their properties were comparatively studied using different techniques. All the results suggest that the functionalized varnish displays improved resistance to the aging process and particularly enhanced photostability and increased hardness (resistance to scratches).

Evaluation of Remineralization Potential of Natural Substances on Artificially Induced Carious Lesions in Primary Teeth: An In Vitro Study.

Aim: To evaluate the remineralizing potential of natural substances on artificially induced caries lesions in primary teeth. Materials and methods: A total of 50 primary molar teeth were selected and subjected to a demineralization process. Then samples were randomly divided into five groups for the remineralization process. Group I-colophony, group II-5% sodium fluoride (NaF) + colophony, group III-grape seed extract (GSE) + colophony, group IV-5% NaF + colophony + 10% peptide, and group V- GSE + colophony + 10% peptide. All the groups were subjected to remineralization using a brushing stimulator for 3,000 cycles. Assessment was done using Vickers hardness testing machine for evaluating the enamel surface microhardness (SMH) and scanning electron microscopy-energy dispersive X-ray analysis (SEM-EDX) for evaluating the surface morphology and mineral content, before and after demineralization and after remineralization, the obtained data was analyzed statistically using IBM Statistical Package for the Social Sciences (SPSS) software version 25. Results: The enamel microhardness results of this study revealed that remineralization of enamel was highest in group V (212.83 ± 64.416) and least in group II (137.83 ± 26.324) p-value of 0.038. SEM-EDX analysis revealed high calcium (Ca) and fluoride (F) content in groups II and IV, which was significant (p-value of 0.001) from other groups. Surface morphology evaluated with SEM revealed spherical globular agglomerates and scaffolding deposits on the enamel surface in groups III and V resembling the remineralization process. Conclusion: Grape seed extract (GSE) with colophony and peptide is a superior natural alternative to NaF. Colophony also exhibited remineralizing potential in primary enamel. Clinical significance: Natural remineralizing agents like GSE, colophony, and its combination serves as a potential alternative to overcome the toxic effect on long-term usage of F. These natural substances can be applicable in clinical conditions by incorporating toothpaste and varnish, which can be used as an alternative or adjuvant to the topical application of F. How to cite this article: Pooja V Ravi, Rajakumar S, Kavitha Ramar. Evaluation of Remineralization Potential of Natural Substances on Artificially Induced Carious Lesions in Primary Teeth: An In Vitro Study. Int J Clin Pediatr Dent 2023;16(2):244-250.

On the Design of Aqueous Emulsions of Colophony Resin.

Companies regularly face market pressure to develop products faster but they also need to simultaneously incorporate technological constraints, sustainability trends, and customer requirements into their designs, which requires the use of systematic procedures. Firms that exploit natural resources and convert them into high-value products are among them. However, the literature on the application of such systematic approaches to products of this type remains scarce, as they often requrire extensive experimental plans involving the testing and optimization of multiple formulations. Here, we propose a systematic approach to the design of pine-resin-in-water emulsions, which can be used to fabricate pressure-sensitive adhesives. The strategy is customer-centric in the sense that the customers' specifications are integrated into the decision-making tool used to assess the quality of the formulations obtained through experiments. This tool uses loss functions to assess satisfaction with individual quality characteristics and multi-attribute decision-making methods to integrate them into an overall quality metric. Our framework is aligned with industrial practices and consists of three sequential stages: (i) screening of primary factors; (ii) optimization of secondary factors; and (iii) assessment of the experimental repeatability of the formulations. In each of these stages, the decision-making tool is used to "drive" the process of finding the optimal formulation.

Medical adhesive allergens: Retrospective analysis of cross-sectional data from the North American Contact Dermatitis Group, 2001-2018.

BACKGROUND: Identification of allergens causing medical adhesive contact allergy is difficult. OBJECTIVE: To characterize the demographics, clinical characteristics, patch test results, and occupational data for North American Contact Dermatitis Group patients with medical adhesive contact allergy. METHODS: A retrospective study of 43,722 North American Contact Dermatitis Group patients patch tested from 2001 to 2018 with medical adhesive (tapes/bandaids/adhesive aids/suture glue) sources, positive patch test results, and final primary diagnoses of allergic contact dermatitis. RESULTS: In total, 313 (0.7%) patients met the inclusion criteria. Compared with other patients with final primary diagnoses of allergic contact dermatitis, patients with a medical adhesive allergy were less likely to be male (odds ratio, 0.58; 95% CI, 0.45-0.77) and/or aged >40 years (odds ratio, 0.76; 95% CI, 0.60-0.96). The most common North American Contact Dermatitis Group screening series allergens were colophony (80.7%), balsam of Peru (3.9%), 2-hydroxyethyl methacrylate (2.7%), and carba mix (2.7%). One-fourth of the patients (79/313, 25.2%) had positive patch test reactions to supplemental allergens/materials, and 54 (17.3%) of the 313 patients only had reactions to supplemental allergens/materials. LIMITATIONS: Results of comprehensive patch testing may be prone to referral population selection bias and may not be representative of the general dermatology population. CONCLUSION: Colophony was the most common allergen. Supplemental allergens and materials should be tested in the evaluation of a suspected medical adhesive contact allergy.

Study on quality standard of compound Yuhong suppository / 药学实践杂志

Objective To establish the quality standard of compound Yuhong suppository. Methods Angelica dahurica, colophony and Sophora flavescens Alt. were identified by thin layer chromatography（TLC）method. The contents of sulfadiazine and dyclonine hydrochloride were determined by HPLC with diode array detection method. The mobile phase was methanol-0.02 mol/L potassium dihydrogen phosphate (adjusted to pH 3.3 with phosphoric acid) for gradient elution. The detection wavelength was 280 nm for sulfadiazine and dyclonine hydrochloride. Results The three Chinese traditional medicines were identified by TLC with clear spots. The linear ranges of sulfadiazine and dyclonine hydrochloride were good in 12.40-99.20 μg/ml (r=0.999 9) and 2.56-20.48 μg/ml (r=0.999 9). The average recovery was (99.21±0.43) % (n=9) and (99.54±0.68) % (n=9). Conclusion This method is accurate, sensitive, and reproducible. It can be used as a standard method for the quality control of compound Yuhong suppository.

Self-Disinfecting Paints with the Natural Antimicrobial Substances: Colophony and Curcumin.

The risk of infection arising from indirect sources-namely, contaminated surfaces-has been proved, particularly in healthcare facilities. In the attempt to minimize this problem, innumerable research projects involving the development of surfaces with self-disinfecting properties are being conducted. In this work, wall-paints with self-disinfecting properties were developed with the scope of being applied in environments prone to contamination, such as those at healthcare settings. Our approach was to develop new paint formulations containing two natural plant-based products with known antimicrobial activity-colophony (CLF) and curcumin (CUR). The natural substances were separately incorporated on a commercial paint and their antibacterial activity was evaluated with several bacterial species following ISO 22196. To assess the paints' safety, cytotoxicity tests were performed on HaCaT and A549 cell lines, using tests on extracts and direct contact tests, as suggested by the standardized protocol ISO 10993. In general, both paints containing CLF and CUR were able to reduce the bacterial growth after 24 h, compared with the control, the commercial unmodified paint. Colophony was even able to reduce the number of culturable bacteria by over 2 log for Staphylococcus aureus, Escherichia coli, and Bacillus cereus. Regarding the cytotoxicity tests performed (WST-1, NRU, and LDH), both formulations revealed promising results regardless of the methodology used.

Films Based on Mater-Bi® Compatibilized with Pine Resin Derivatives: Optical, Barrier, and Disintegration Properties.

Mater-Bi® NF866 (MB) was blended with gum rosin and two pentaerythritol esters of gum rosin (labeled as LF and UT), as additives, to produce biobased and compostable films for food packaging or agricultural mulch films. The films were prepared by blending MB with 5, 10, and 15 wt.% of each additive. The obtained films were characterized by optical, colorimetric, wettability, and oxygen barrier properties. Moreover, the additives and the MB-based films were disintegrated under composting conditions and the effect of each additive on the biodegradation rate was studied. All films were homogeneous and optically transparent. The color of the films tended to yellow tones due to the addition of pine resin derivatives. All the formulated films presented a complete UV-transmittance blocking effect in the UVA and UVB region, and those with 5 wt.% of pine resin derivatives increased the MB hydrophobicity. Low amounts of resins tend to maintain the oxygen transmission rate (OTR) values of the neat MB, due to its good solubilizing and compatibilizing effects. The disintegration under composting conditions test revealed that gum rosin completely disintegrates in about 90 days, while UT degrades 80% and LF degrades 5%, over 180 days of incubation. As expected, the same tendency was obtained for the disintegration of the studied films, although Mater-Bi® reach 28% of disintegrability over the 180 days of the composting test.

Evaluation of amorphous dispersion of a cellulose ester-colophony mix for ibuprofen controlled release processed by HME and spin coating.

Recently, there has been a rapid growth of using bio-based materials in pharmaceutical applications, due to their low cost and availability. In this study, natural composition of cellaburate (cellulose-ester) and colophony (pine-resin) was used to prepare films to control ibuprofen release from its amorphous solid dispersion. The effect of two preparation technologies of spin-coating and hot-melt-extrusion was studied on the physicochemical properties and in vitro dissolution/release behavior. Physical stability was evaluated for 12 w at 54 %RH/22 °C. Characterization involved using PLM/DSC/MTDSC/ATRFTIR/TGA/SEM and PXRD. Ibuprofen was amorphously-dispersed at 30 %(w/w) in 35:65 colophony:cellaburate films. Spin-films were more physically stable over 12 w; however, controlled release of ibuprofen was achieved mainly from hot-melt-extruded-films for 5 h. Both films have shown first-order release kinetics; whereby polymeric swelling and relaxation likely governed the release. The successful preparation of cellaburate-colophony platform that has achieved tunable release profiles of poorly water-soluble drug holds the potential for further drug delivery development.

Crude Methanol Extract of Rosin Gum Exhibits Specific Cytotoxicity against Human Breast Cancer Cells via Apoptosis Induction.

BACKGROUND: Rosin (Colophony) is a natural resin derived from species of the pine family Pinaceae. It has wide industrial applications including printing inks, photocopying paper, adhesives and varnishes, soap and soda. Rosin and its derivatives are employed as ingredients in various pharmaceutical products such as ointments and plasters. Rosin-based products contain allergens that may exert some occupational health problems such as asthma and contact dermatitis. OBJECTIVE: Our knowledge of the pharmaceutical and medicinal properties of rosin is limited. The current study aims at investigating the cytotoxic potential of Rosin-Derived Crude Methanolic Extract (RD-CME) and elucidation of its mode-of-action against breast cancer cells (MCF-7 and MDA-MB231). METHODS: Crude methanol extract was prepared from rosin. Its phenolic contents were analyzed by Reversed- Phase High-Performance Liquid Chromatography (RP-HPLC). Antioxidant activity was evaluated by DPPH radical-scavenging assay. Antiproliferation activity against MCF-7 and MDA-MB231 cancerous cells was investigated by MTT assay; its potency compared with doxorubicin as positive control and specificity were assessed compared to two non-cancerous cell lines (BJ-1 and MCF-12F). Selected apoptosis protein markers were assayed by western blotting. Cell cycle analysis was performed by Annexin V-FITC/PI FACS assay. RESULTS: RD-CME exhibited significant and selective cytotoxicity against the two tested breast cancer cells (MCF-7 and MDA-MB231) compared to normal cells as revealed by MTT assay. ELISA and western blotting indicated that the observed antiproliferative activity of RD-CME is mediated via the engagement of an intrinsic apoptosis signaling pathway, as judged by enhanced expression of key pro-apoptotic protein markers (p53, Bax and Casp 3) relative to vehicle solvent-treated MCF-7 control cells. CONCLUSION: To our knowledge, this is the first report to investigate the medicinal anticancer and antioxidant potential of crude methanolic extract derived from colophony rosin. We provided evidence that RD-CME exhibits strong antioxidant and anticancer effects. The observed cytotoxic activity against MCF-7 is proposed to take place via G2/M cell cycle arrest and apoptosis. Colophony resin has a great potential to join the arsenal of plantderived natural anticancer drugs. Further thorough investigation of the potential cytotoxicity of RD-CME against various cancerous cell lines is required to assess the spectrum and potency of its novel activity.

Natural products such as adhesives in oil paintings.

The study and analysis of the materials employed in artistic paintings provide deeper knowledge about the history of the work of art, including restoration efforts made in the past, and the development of painting techniques through the centuries. Gas chromatography coupled to mass spectrometry is the main analytical technique employed, as it proved to be the most suitable technique for the analysis of complex mixtures, thanks to its combination of sensitivity, wide range of applicability and versatility. Further, µFT-IR technique has also been employed to get a preliminary screening of the samples taken from paintings. In this paper, the analytical protocol based on these two techniques has been applied for analysing natural terpenic resins; its performance has been tested on microsamples collected from paintings of valuable artistic interest.

Catalytic methyl esterification of colophony over ZnO/SFCCR with subcritical CO2: catalytic performance, reaction pathway and kinetics.

A heterogeneous catalyst (ZnO/SFCCR) composed of ZnO supported on spent fluid cracking catalyst by wet impregnation was synthesized and applied to the esterification of colophony acids with methanol under subcritical CO2 conditions. The catalyst was characterized by SEM-EDS, BET, ICP, FTIR, XRD and Py-IR. An experimental set-up involving a new injection technique was designed to promote the heterogeneous methyl esterification, and the subcritical CO2 played a role in auxiliary acid catalysis (a pH range of 3.54-3.91), increasing the lifespan of ZnO/SFCCR, reducing the viscosity of the system to promote gas-liquid mass transfer. A maximum conversion rate of 97.01% was obtained in a relatively short time of 5 h. Kinetic experiments were performed from 190 to 220°C using a special high-temperature sampling device and analysing aliquots with high-performance liquid chromatography. A new reaction pathway, involving methyl abietate, methyl dehydroabietate, methyl neoabietate and methyl palustrate along with other kinds of colophony acids, was developed. The kinetic parameters were obtained using the Levenberg-Marquardt nonlinear least-squares method, and the activation energies for the isomerizations of neoabietic and palustric acids and for the methyl esterification of neoabietic, abietic, palustric and dehydroabietic acids were found to be 107.09, 113.95, 68.99, 49.85, 75.43 and 59.20 kJ mol-1, respectively. The results from the kinetic model were in good agreement with experimental values.

Liquid Adhesive Contact Dermatitis After Bunionectomy: A Case Report and Literature Review.

Hypersensitivity reactions to the skin adherents used in postoperative dressings are an uncommon but unfavorable complication that can result in poor wound healing, increased scarring, and surgical wound infections. This unexpected and unforeseen complication is not well documented in the current published data. We present the case of a 39-year-old female who had undergone a bunionectomy procedure and developed allergic contact dermatitis postoperatively. We discuss the clinical findings and treatments administered after application of a commonly used liquid skin adhesive applied intraoperatively. Through the use of topical and oral steroids and foot soaks in astringent solutions, over the course of several months, the patient's skin returned to the expected postoperative appearance. With the increased consciousness to minimize surgical scarring to improve cosmesis, one of these causes of the reaction might have been the liquid adhesive used in the surgical closure and dressing application. Therefore, we additionally reviewed the adhesive compound's chemical makeup and any potential cross-reactivity to help surgeons make an informed decision of whether to use a liquid adhesive. The various ingredients in liquid adhesives contain known allergen compounds that can cause a reaction, such as balsam of Peru and colophony or rosin, both of which are reviewed in our report. We also present a treatment algorithm developed from the compiled data in the case of a patient developing an allergic reaction. From our literature review and considering the percentage of incidence, if a surgeon desires to use a liquid adhesive product, Mastisol(®) should be chosen because of its lower reactivity and greater adhesive properties compared with the compound tincture of benzoin.

Preparation of functionalized porous nano-γ-Al2O3 powders employing colophony extract.

This study reports the synthesis of porous nano alumina employing carboxylato-alumoxanes [Al(O) x (OH) y (O2CR) z ] n as precursors for controlling the pore size, pore size distribution and porosity of the alumina, using a new process ecofriendly. The carboxylato-alumoxanes was prepared by the reaction of boehmite with carboxylic acids. The boehmite was obtained by the hydrolysis of aluminum alkoxide in an aqueous solution. The colophony extract is employed as a source of carboxylic acids. The materials were characterized, using XRD, TGA, N2 physical adsorption, SEM, TEM, NMR and FTIR. A mechanism was proposed for the formation of the synthesized structures. TEM measurements confirmed particle size ranged from 5 to 8 nm.