Developing evidence-based clinical imaging guidelines for the diagnosis of vertically fractured teeth.

OBJECTIVES: This study aimed to develop an evidence-based clinical imaging guideline for teeth suspected with vertical root fractures. METHODS: An adaptation methodology based on the Korean Clinical Imaging Guidelines (K-CIG) was used in the guideline development process. After searching for guidelines using major databases such as Ovid-Medline, Elsevier-Embase, National Guideline Clearinghouse, and Guideline International Network, as well as domestic databases such as KoreaMed, KMbase, and KoMGI, two reviewers analyzed the retrieved articles. The retrieved articles were included in this review using well-established inclusion criteria. RESULTS: Twenty articles were identified through an online search, of which three were selected for guideline development. Based on these three guidelines, this study developed specific recommendations concerning the optimal imaging modality for diagnosing teeth suspected of vertical root fractures. CONCLUSIONS: Periapical radiography is the preferred method for assessing teeth with mastication-related pain and suspected vertical root fractures. However, if intraoral radiographs do not provide sufficient information about root fractures, a small FOV CBCT may be considered. However, the use of CBCT in endodontically treated teeth is significantly constrained by the presence of artificial shading.

A comparative analysis of sphenoid and frontal sinuses using cone beam computed tomography for sex determination.

Objectives: This study aimed to evaluate linear measurements of the frontal sinus (FS) and sphenoid sinus (SS) for sex identification on cone beam computed tomography (CBCT) images. Methods: A comparative CBCT analysis was conducted on 200 full field of view (FOV) scans taken as part of routine dental investigations. Dimensions of the bilateral frontal and sphenoid sinuses were measured. Intra- and interobserver reliability were calculated. Independent t tests were used to compare the various parameters between sexes. Stepwise discriminant function analysis was used to determine sex. Additionally, the receiver operating characteristic (ROC) curve, area under the curve (AUC), sensitivity, and specificity were also determined. A p value < 0.05 was considered significant. Results: A total of 200 CBCT scans were included in the study. The mean age (±SD) among males was 25.66 (±7.11) and that among females was 24.64 (±5.12). The ROC curve revealed that the right length of the frontal sinus showed the greatest accuracy in sex identification in comparison to other linear measurements of the FS and SS. The results of our study indicated that the equation obtained from stepwise discriminant function analysis can aid in sex determination with an accuracy of 76.5 %. Conclusion: Our findings support the sexual dimorphism of linear measurements of FS and SS. There was an improvement in the accuracy of sex prediction when the linear measurements of FS and SS were considered in combination rather than in isolation. The derived equation can be an adjunctive tool for sex identification for the representative population.

Retrospective analysis of pathological changes in the maxillary sinus with CBCT.

The aim of this study is to examine the frequency of maxillary sinus pathologies and their relationship with each other using cone beam computed tomography (CBCT) and to make a new grade according to the number of affected walls. 1000 maxillary sinuses of 500 patients with CBCT images were included in the study. Anatomical variations and pathological formations of the maxillary sinuses were examined. Images were evaluated for the presence of flat, polypoidal, partial and generalized mucosal thickening, partial and total opacification, polyps and mucous retention cysts. Maxillary sinus pathologies were graded according to the number of walls affected. In the examined CBCT images, no pathology was found in 54.2% of the maxillary sinuses, while pathology was observed in 45.8%. The most common sinus pathologies were mucous retention cyst (12.3%) and polypoidal thickening (12.2%). While pneumatization, ostium obstruction, and the presence of sinus-related roots were associated with sinus pathology, no relationship was found with nasal septum deviation and the presence of septa. Before dental implant and sinus surgery applications, the presence of sinus pathologies and their relationship with anatomical variations can be evaluated with CBCT, a three-dimensional technique, and complications such as sinus membrane perforation, infection, failure to break the bone window due to the presence of antral septa, graft loss and oroantral fistula formation can be reduced.

[Study on the consistency between CBCT image features of sphenopalatine foramen and those seen in nasal endoscopy].

Objective:To study the clinical anatomy of the sphenopalatine foramina by dissecting the sphenopalatine foramina during Vidian nerve branch neurotomy. The anatomy and CBCT images of sphenopalatine foramen were analyzed to facilitate the navigational of clinical operation using CBCT images. Methods:From October 2017 to September 2023, 84 cases（168 sides） of Vidian nerve branch neurotomy in our department were collected. The clinical summary was made according to the anatomy of sphenopalatine foramen during the operation. Preoperative CBCT imaging findings of the sphenopalatine foramina were also studied. Results:The clinical anatomy of sphenopalatine foramen could be divided into four types: middle meatus type（1.19%）, trans-meatus type（62.29%）, superior meatus type（33.33%） and double foramen type（1.19%）. The incidence of ethmoidal ridge was 98.81%. The distance from sphenopalatine foramina to posterior nasal canal were（14.63±2.66） mm to left and（14.65±2.63） mm to right, The position Angle ∠a of lower margin of sphenopalatine foramina were（62.36±10.05）° to left and（61.51±11.82）° to right, respectively. Axial CT images can be used to divide the sphenopalatine foramen into five levels: the upper edge of the sphenopalatine foramen level, the Vidian nerve level, the basal plate interaction level, the lower edge of the sphenopalatine foramen level and the pterygopalatine canal level. The agreement between endoscopic anatomy of sphenopalatine foramen and imaging navigation was 100%. Conclusion:The sphenopalatine foramina exhibit various anatomical types. The preoperative navigational CBCT reading can effectively identify the type of sphenopalatine foramina, guide the choice of surgical method, and help avoid serious complications. This has significant clinical application value.

In vitro Accuracy of Ultra-Low Dose Cone-Beam Computed Tomography for Detection of Proximal Caries.

OBJECTIVES: This study aimed to assess the accuracy of ultra-low dose (ULD) cone-beam computed tomography (CBCT) for detection of proximal caries. METHODS: This in vitro study evaluated 104 molar and premolar teeth. The teeth were mounted in dry skulls and underwent CBCT with four protocols of high-resolution (HR), normal (NORM), ULD-HR, and ULD-NORM; 78 CBCT images were scored by three observers for presence and penetration depth of caries twice with a 2-week interval using a 5-point Likert scale. The teeth were then sectioned and observed under a stereomicroscope (gold standard). The four protocols were compared with each other and with the gold standard. The receiver operating characteristic (ROC) curve was drawn, and the area under the curve (AUC) was calculated and compared by the Chi-square test (alpha = 0.05). RESULTS: The interobserver agreement ranged from 0.5233 to 0.6034 for ULD-NORM, 0.5380 to 0.6279 for NORM, 0.5856 to 0.6300 for ULD-HR, and 0.6614 to 0.7707 for HR images. The intra-observer agreement ranged from 0.6027 to 0.8812 for ULD-HR, 0.7083 to 0.7556 for HR, 0.6076 to 0.9452 for ULD-NORM, and 0.7012 to 0.9221 for NORM images. Comparison of AUC revealed no significant difference between NORM and ULD-NORM (P > 0.05), or HR and ULD-HR (P > 0.05). The highest AUC belonged to HR (0.8529) and the lowest to NORM (0.7774). CONCLUSIONS: Considering the significant reduction in radiation dose in ULD CBCT and its acceptable diagnostic accuracy for detection of proximal caries, this protocol may be used for detection of proximal carious lesions and assessment of their depth.

Cone-beam computed tomography-based descriptive classification for transverse root fracture.

Transverse root fracture (TRF) is classified as a cervical, middle or apical third root fracture on a periapical radiograph. The International Association of Dental Traumatology (IADT) suggests that cone-beam computed tomography (CBCT) should be considered, when conventional radiographs provide 'insufficient' information for diagnosis and treatment planning. Considering that CBCT can divulge additional information, it would be beneficial to have a clinically pertinent three-dimensional classification for TRF. The proposed alphanumeric classification includes the traumatised tooth number, describes the number of TRF, the facial and lingual location of each fracture line on the anatomic root, and its position relative to the crest of the alveolar bone. Further, diastasis, displacement of the coronal fragment and status of the alveolar bone at the site of TRF are also documented. This comprehensive classification system would provide a standard format for reporting, aid in referral communication and can be applied for future outcome studies on TRF.

Nomogram to predict radicular grooves in maxillary lateral incisors in preoperative orthodontic population.

OBJECTIVES: This study aimed to develop and validate a predictive nomogram for diagnosing radicular grooves (RG) in maxillary lateral incisors (MLIs), integrating demographic information, anatomical measurements, and Cone Beam Computed Tomography (CBCT) data to diagnose the RG in MLIs based on the clinical observation before resorting to the CBCT scan. MATERIALS AND METHODS: A retrospective cohort of orthodontic patients from the School and Hospital of Stomatology, Wuhan University, was analyzed, including demographic characteristics, photographic anatomical assessments, and CBCT diagnoses. The cohort was divided into development and validation groups. Univariate and multivariate logistic regression analyses identified significant predictors of RG, which informed the development of a nomogram. This nomogram's performance was validated using receiver operating characteristic analysis. RESULTS: The study included 381 patients (64.3% female) and evaluated 760 MLIs, with RG present in 26.25% of MLIs. The nomogram incorporated four significant anatomical predictors of RG presence, demonstrating substantial predictive efficacy with an area under the curve of 0.75 in the development cohort and 0.71 in the validation cohort. CONCLUSIONS: A nomogram for the diagnosis of RG in MLIs was successfully developed. This tool offers a practical checklist of anatomical predictors to improve the diagnostic process in clinical practice. CLINICAL RELEVANCE: The developed nomogram provides a novel, evidence-based tool to enhance the detection and treatment planning of MLIs with RG in diagnostic and therapeutic strategies.

Vertical root fracture diagnosis in teeth with metallic posts: Impact of metal artifact reduction and sharpening filters.

Purpose: This study examined the influence of a metal artifact reduction (MAR) tool, sharpening filters, and their combination on the diagnosis of vertical root fracture (VRF) in teeth with metallic posts using cone-beam computed tomography (CBCT). Materials and Methods: Twenty single-rooted human premolars - 9 with VRF and 11 without - were individually placed in a human mandible. A metallic post composed of a cobalt-chromium alloy was inserted into the root canal of each tooth. CBCT scans were then acquired under the following parameters: 8 mA, a 5×5 cm field of view, a voxel size of 0.085 mm, 90 kVp, and with MAR either enabled or disabled. Five oral and maxillofacial radiologists independently evaluated the CBCT exams under each MAR mode and across 3 sharpening filter conditions: no filter, Sharpen 1×, and Sharpen 2×. The diagnostic performance was quantified by the area under the receiver operating characteristic curve (AUC), sensitivity, and specificity. These metrics were compared using 2-way analysis of variance with a significance level of α=5%. Intra- and inter-examiner agreement were assessed using the weighted kappa test. Results: Neither MAR nor the application of sharpening filters significantly impacted AUC or specificity (P>0.05). However, sensitivity increased when MAR was combined with Sharpen 1× and Sharpen 2× (P=0.015). The intra-examiner agreement ranged from fair to substantial (0.34-0.66), while the inter-examiner agreement ranged from fair to moderate (0.27-0.41). Conclusion: MAR in conjunction with sharpening filters improved VRF detection; therefore, their combined use is recommended in cases of suspected VRF.

Correlation between cone-beam computed tomographic findings and the apnea-hypopnea index in obstructive sleep apnea patients: A cross-sectional study.

Purpose: The aim of this study was to explore the correlations of cone-beam computed tomographic findings with the apnea-hypopnea index in patients with obstructive sleep apnea. Materials and Methods: Forty patients with obstructive sleep apnea were selected from the ear-nose-throat (ENT) outpatient clinic, Faculty of Medicine, Mansoura University. Cone-beam computed tomography was performed for each patient at the end of both inspiration and expiration. Polysomnography was carried out, and the apnea-hypopnea index was obtained. Linear measurements, including cross-sectional area and the SNA and SNB angles, were obtained. Four oral and maxillofacial radiologists categorized pharyngeal and retropalatal airway morphology and calculated the airway length and volume. Continuous data were tested for normality using the Kolmogorov-Smirnov test and reported as the mean and standard deviation or as the median and range. Categorical data were presented as numbers and percentages, and the significance level was set at P<0.05. Results: The minimal value of the cross-sectional area, SNB angle, and airway morphology at the end of inspiration demonstrated a statistically significant association (P<0.05) with the apnea-hypopnea index, with excellent agreement. No statistically significant difference was found in the airway volume, other linear measurements, or retropalatal airway morphology. Conclusion: Cone-beam computed tomographic measurements in obstructive sleep apnea patients may be used as a supplement to a novel radiographic classification corresponding to the established clinical apnea-hypopnea index classification.

Distribution of the intraosseous branch of the posterior superior alveolar artery relative to the posterior maxillary teeth.

Purpose: Preoperative identification of the intraosseous posterior superior alveolar artery (PSAA) is critical when planning sinus surgery. This study was conducted to determine the distance between the cementoenamel junction and the PSAA, as well as to identify factors influencing the detection of the PSAA on cone-beam computed tomography (CBCT). Materials and Methods: In total, 254 CBCT scans of maxillary sinuses, acquired with 2 different scanners, were examined to identify the PSAA. The distance from the cementoenamel junction (CEJ) to the PSAA was recorded at each maxillary posterior tooth position. Binomial logistic regression and multiple linear regression were employed to evaluate the effects of scanner type, CBCT parameters, sex, and age on PSAA detection and CEJ-PSAA distance, respectively. P-values less than 0.05 were considered to indicate statistical significance. Results: The mean CEJ-PSAA distances at the second molar, first molar, second premolar, and first premolar positions were 17.0±4.0 mm, 21.8±4.1 mm, 19.5±4.7 mm, and 19.9±4.9 mm for scanner 1, respectively, and 17.3±3.5 mm, 16.9±4.3 mm, 18.5±4.1 mm, and 18.4±4.3 mm for scanner 2. No independent variable significantly influenced PSAA detection. However, tooth position (b=-0.67, P<0.05) and scanner type (b=-1.3, P<0.05) were significant predictors of CEJ-PSAA distance. Conclusion: CBCT-based estimates of CEJ-PSAA distance were comparable to those obtained in previous studies involving cadavers, CT, and CBCT. The type of CBCT scanner may slightly influence this measurement. No independent variable significantly impacted PSAA detection.

Evaluation of peri-implant bone defects on cone-beam computed tomography and the diagnostic accuracy of detecting these defects on panoramic images.

Purpose: This study was conducted to identify the typical sites and patterns of peri-implant bone defects on cone-beam computed tomography (CBCT) images, as well as to evaluate the detectability of the identified bone defects on panoramic images. Materials and Methods: The study population included 114 patients with a total of 367 implant fixtures. CBCT images were used to assess the presence or absence of bone defects around each implant fixture at the mesial, distal, buccal, and lingual sites. Based on the number of defect sites, the presentations of the peri-implant bone defects were categorized into 3 patterns: 1 site, 2 or 3 sites, and circumferential bone defects. Two observers independently evaluated the presence or absence of bone defects on panoramic images. The bone defect detection rate on these images was evaluated using receiver operating characteristic analysis. Results: Of the 367 implants studied, 167 (45.5%) had at least 1 site with a confirmed bone defect. The most common type of defect was circumferential, affecting 107 of the 167 implants (64.1%). Implants were most frequently placed in the mandibular molar region. The prevalence of bone defects was greatest in the maxillary premolar and mandibular molar regions. The highest kappa value was associated with the mandibular premolar region. Conclusion: The typical bone defect pattern observed was a circumferential defect surrounding the implant. The detection rate was generally higher in the molar region than in the anterior region. However, the capacity to detect partial bone defects using panoramic imaging was determined to be poor.

Impact of the spatial orientation of the patient's head, metal artifact reduction, and tube current on cone-beam computed tomography artifact expression adjacent to a dental implant: A laboratory study using a simulated surgical guide.

Purpose: The aim of this study was to evaluate image artifacts in the vicinity of dental implants in cone-beam computed tomography (CBCT) scans obtained with different spatial orientations, tube current levels, and metal artifact reduction algorithm (MAR) conditions. Materials and Methods: One dental implant and 2 tubes filled with a radiopaque solution were placed in the posterior region of a mandible using a surgical guide to ensure parallel alignment. CBCT scans were acquired with the mandible in 2 spatial orientations in relation to the X-ray projection plane (standard and modified) at 3 tube current levels: 5, 8, and 11 mA. CBCT scans were repeated without the implant and were reconstructed with and without MAR. The mean voxel and noise values of each tube were obtained and compared using multi-way analysis of variance and the Tukey test (α=0.05). Results: Mean voxel values were significantly higher and noise values were significantly lower in the modified orientation than in the standard orientation (P<0.05). MAR activation and tube current levels did not show significant differences in most cases of the modified spatial orientation and in the absence of the dental implant (P>0.05). Conclusion: Modifying the spatial orientation of the head increased brightness and reduced spatial orientation noise in adjacent regions of a dental implant, with no influence from the tube current level and MAR.

Optimizing cone-beam computed tomography exposure for an effective radiation dose and image quality balance.

Purpose: The aim of this study was to evaluate the influence of different cone-beam computed tomography (CBCT) acquisition protocols on reducing the effective radiation dose while maintaining image quality. Materials and Methods: The effective dose emitted by a CBCT device was calculated using thermoluminescent dosimeters placed in a Rando Alderson phantom. Image quality was assessed by 3 experienced evaluators. The relationship between image quality and confidence was evaluated using the Fisher exact test, and the agreement among raters was assessed using the kappa test. Multiple linear regression analysis was performed to investigate whether the technical parameters could predict the effective dose. P-values<0.05 were considered to indicate statistical significance. Results: The optimized protocol (3 mA, 99 kVp, and 450 projection images) demonstrated good image quality and a lower effective dose for radiation-sensitive organs. Image quality and confidence had consistent values for all structures (P<0.05). Multiple linear regression analysis resulted in a statistically significant model. The milliamperage (b=0.504; t=3.406; P=0.027), kilovoltage peak (b=0.589; t=3.979; P=0.016) and number of projection images (b=0.557; t=3.762; P=0.020) were predictors of the effective dose. Conclusion: Optimized CBCT acquisition protocols can significantly reduce the effective radiation dose while maintaining acceptable image quality by adjusting the milliamperage and projection images.

Evaluating the Anterior Loop of the Mental Nerve Using Cone Beam CT Scans in the Jordanian Population.

INTRODUCTION: Knowledge of anatomical landmarks is crucial for effective dental treatments, especially in surgical procedures. The mental nerve (MN), a branch of the inferior alveolar nerve, features a critical landmark known as the anterior loop (AL), often overlooked by surgeons. This study aims to assess the occurrence of the MN AL, its type, and its length within a sample of the Jordanian population by utilizing cone beam computed tomography (CBCT) scans. METHODS: This retrospective observational study included the acquisition of CBCT images from a total of randomly selected 268 patients who sought treatment for a range of dental conditions (such as tooth extraction, orthodontic therapy, and dental implants) at hospitals affiliated with the Jordanian Royal Medical Services. Reformatted images were utilized to detect the AL type, length, and the association between the nerve type and mental foramen (MF) position. RESULTS: This study involved 268 patients. The distribution of MF positions and the characteristics of the inferior dental nerve were evaluated, with no significant gender differences observed. The predominant location for the MF in both males and females in both sides was position IV, with 52% of females and 56-59% (left-right sides) of males presenting this trait. The inferior dental nerve types also showed no significant gender variation, with 42-43% (left-right sides) of females having type III and a similar distribution among males. Measurements of the midline-mental foramen and inter-foramen distances revealed slight variations between genders, with significant differences noted in the right AL length for type III nerves, favoring males (p=0.034). A notable correlation was found between the type of inferior dental nerve and the MF position, particularly with type I nerves predominantly associating with position IV mental foramina (p≤0.004). CONCLUSION: CBCT scans are essential in the precise evaluation of the AL, aiding in the prevention of nerve injuries during dental procedures. Our results highlight the diversity of the AL in the Jordanian population and the importance of individualized treatment plans. Future research with larger cohorts is advised to refine these insights, aiming to improve treatment outcomes and patient care.

Radiographic assessment of the peri-implant site.

While peri-implant mucositis relies solely on clinical parameters, radiological assessment becomes indispensable for diagnosing peri-implantitis. Intraoral radiography, with its simplicity of application, low radiation exposure, and adequate representation of peri-implant structures, stands out as the standard of care for both immediate and follow-up assessments. Standardization by custom-made radiologic splints allows for excellent comparability with previous images and allows for the determination of even small changes in contour and density of the peri-implant bone. Furthermore, other radiographic modalities like panoramic radiography and cone beam computed tomography (CBCT) may provide useful features for specific patients and clinical cases while also showing innate limitations. Beyond the assessment of the marginal peri-implant bone level as the crucial parameter of clinical relevance, radiologic assessment may reveal various other findings related to the prosthetic restoration itself, the precision of its fit to the implant, and the peri-implant soft and hard tissues. Since such findings can be crucial for the assessment of peri-implant health and the implants' prognosis, a systematic diagnostic evaluation pathway for a thorough assessment is recommended to extract all relevant information from radiologic imaging. This article also provides an overview of the clinical and chronological indications for different imaging modalities in peri-implant issues.

Assessment of Bone Thickness at the Infra Zygomatic Crest Region for Various Orthodontic Miniscrew Implant (OMSI) Insertion Angles: A Cone-Beam Computed Tomographic Study.

Objective: To evaluate the infrazygomatic crest (IZC) bone and develop guidelines for the optimum placement of orthodontic miniscrew implants (OMSIs) along the distobuccal root of the permanent maxillary first molar. Methods: Bone thickness of the IZC region of 50 young adults (25 males and 25 females) aged 18-30 years were evaluated using cone-beam computed tomography images. The infrazygomatic bone thickness along the distobuccal root of the permanent maxillary first molar was assessed at various insertion angles (40° to 75° i.r.t the maxillary occlusal plane) with an increment of 5°. Student's t-test was used to compare the IZC bone thickness and height at the orthodontic miniscrew insertion site for males and females on the right and left sides. Results: The bone thickness of the IZC region above the distobuccal root of the permanent maxillary first molar was estimated between 4.39±0.25 mm and 9.03±0.45 mm for insertion angles from 40° to 75° to the maxillary occlusal plane. The corresponding OMSI insertion heights were 17.71±0.61 mm to 13.69±0.75 mm, respectively, above the maxillary occlusal plane. There were statistically significant gender and side-wise variations in bone thickness at the IZC area and insertion height. Conclusion: The safe position for OMSI placement at the IZC was 13.69-16 mm from the maxillary occlusal plane with an insertion angle between 55° and 75°. These parameters provide the optimum placement of OMSIs along the distobuccal root of the permanent maxillary first molar.

A Cone-Beam Computed Tomography-Based Evaluation of Root Dilaceration in Permanent Premolars: A Retrospective Study.

Statement of the Problem: As a developmental disorder characterized by an abnormal bend and angle in the longitudinal axis of the tooth root, dilaceration can cause complications in routine dental procedures such as endodontics, orthodontics, and surgical treatments. Purpose: The purpose of this study was to investigate the prevalence of dilaceration in maxillary and mandibular premolar teeth in a population of Shiraz city based on cone-beam computed tomography (CBCT). Materials and Method: This is a retrospective cross-sectional study on 927 premolar teeth and 132 CBCT radiographs of patients obtained from four private radiology clinics in Shiraz (Iran). In this study, the presence, location, direction, and severity of dilaceration in premolar roots as well as its relationship with gender were investigated. Chi-square and Fisher tests were used to analyze the data. Results: The results showed that 17% of the studied 927 teeth had dilaceration. The prevalence of dilaceration was significantly higher in women than in men (20.3% vs. 13.6%, p= 0.005). The dilaceration rates were significantly higher in the mandibular first and second premolar teeth (31.6% and 26%, p= 0.002) than in the other teeth. In addition, the highest prevalence was in the distal direction with mild severity in the apical third of the root (p< 0.001). Conclusion: According to the results of this study, the prevalence of dilaceration was relatively high in mandibular premolar teeth especially in women.

A Comparative Evaluation of the Efficiencies of Different Rotary File Systems in Terms of Remaining Dentin Thickness Using Cone Beam Computed Tomography: An In Vitro Study.

AIM: The aim of this study was to evaluate and compare the dentin thickness of the mesio-buccal canal of the lower first molar after canal preparation with three different rotary file systems using cone beam computed tomography (CBCT). METHODOLOGY: TruNatomy (Dentsply Sirona, USA), 2Shape (Micro-Mega, France), and One Curve (Micro-Mega, France) were the three different rotary files that were employed. A total of 45 excised human permanent first mandibular molars were divided into Groups A (TruNatomy), B (2Shape), and C (One Curve) at random. To measure the residual dentin thickness at 3 mm, 5 mm, and 7 mm from the radiographic apex, the mesial root of the tooth was removed from the tooth, and a mesio-buccal canal was taken. Samples were mounted in clear acrylic resin and were subjected to a pre-instrumentation CBCT scan. The mesio-buccal canal was cleaned and shaped while maintaining the final mesio-buccal canal preparation of Group A - 26/0.04, Group B - 25/0.04, and Group C - 25/0.04. The samples were extensively irrigated with 3% sodium hypochlorite and 17% EDTA, and a post-instrumentation scan was performed on them. Statistics were used to determine the values from CBCT scans that were recorded for pre- and post-instrumentations. RESULTS: The results showed that Group A had the greatest drop in dentin thickness, followed by Group B and Group C. The change in dentin thickness was greatest at 3 mm and 7 mm. CONCLUSION: In contrast to TruNatomy and 2Shape rotary file systems, One Curve has the advantage of maintaining a tooth's thickness at 3 and 7 millimeters from the radiological apex. Since the TruNatomy file system removes more dentin than the other two combined, it should be used cautiously. Choosing the right instrument is crucial for cleaning and shaping during root canal preparation.

A systematic review comparing the effective radiation dose of musculoskeletal cone beam computed tomography to other diagnostic imaging modalities.

PURPOSE: Cone-Beam CT (CBCT) is well established in orofacial diagnostic imaging and is currently expanding into musculoskeletal applications. This systematic review sought to update the knowledge base on radiation dose comparisons between imaging modalities in MSK imaging and consider how research studies have reported dose measures. METHODS: This review utilised a database search and an online literature tool. Studies with potential relevance were screened then before full text review, each performed by two independent reviewers, with a third independent reviewer available for conflicts. Data was extracted using a bespoke tool created within the literature tool. RESULTS: 21 studies were included in the review which compared CBCT with MSCT (13), conventional radiography (1), or both (7). 19 studies concluded that CBCT provided a reduced radiation dose when compared with MSCT: the factor of reduction ranging from 1.71 to 50 with an average of 12. Studies comparing CBCT to DR found DR to have an average dose reduction of 4.55. CONCLUSIONS: The claims that CBCT produces a lower radiation dose than MSCT is borne out with most studies confirming doses less than half that of MSCT. Fewer studies include DR as a comparator but confirm that CBCT results in a higher effective dose on average, with scope for CBCT to provide an equivalent radiation dose. This review highlighted a need for consistency in methodology when conducting studies which compare radiation dose across different technologies. Potential solutions lie outside the scope of this review, likely requiring multi-discipline approach to ensure a cohesive outcome.

An artificial intelligence grading system of apical periodontitis in cone-beam computed tomography data.

OBJECTIVES: In order to assist junior doctors in better diagnosing apical periodontitis (AP), an artificial intelligence AP grading system was developed based on deep learning (DL) and its reliability and accuracy were evaluated. METHODS: 120 cone-beam computed tomography (CBCT) images were selected to construct a classification dataset with four categories, which were divided by CBCT periapical index (CBCTPAI), including normal periapical tissue, CBCTPAI 1-2, CBCTPAI 3-5 and young permanent teeth. Three classic algorithms (ResNet50/101/152) as well as one self-invented algorithm (PAINet) were compared with each other. PAINet were also compared with two recent Transformer-based models and three attention models. Their performance was evaluated by accuracy, precision, recall, balanced F score (F1-score) and the area under the macro-average receiver operating curve (AUC). Reliability was evaluated by Cohen's kappa ​​to compare the consistency of model predicted labels with expert opinions. RESULTS: PAINet performed best among the four algorithms. The accuracy, precision, recall, F1-score and AUC on the test set were 0.9333, 0.9415, 0.9333, 0.9336 and 0.9972, respectively. Cohen's kappa was 0.911, which represented almost perfect consistency. CONCLUSIONS: PAINet can accurately distinguish between normal periapical tissues, CBCTPAI 1-2, CBCTPAI 3-5 and young permanent teeth. Its results were highly consistent with expert opinions. It can help junior doctors diagnose and score AP, reducing the burden. It can also be promoted in areas where experts are lacking to provide professional diagnostic opinions.