Updated review on contaminant communication experiences in the circumpolar Arctic.

Arctic populations are amongst the highest exposed populations to long-range transported contaminants globally, with the main exposure pathway being through the diet. Dietary advice is an important immediate means to address potential exposure and help minimize adverse health effects. The objective of this work is to enable easier access to dietary advice and communication guidance on contaminants with a focus on the Arctic. This manuscript is part of a special issue summarizing the Arctic Monitoring and Assessment Programme's Assessment 2021: Human Health in the Arctic. The information was derived with internet searches, and by contacting relevant experts directly. Results include risk communication efforts in European Arctic countries, effectiveness evaluation studies for several Arctic countries, experience of social media use, and the advantages and challenges of using social media in risk communication. We found that current risk communication activities in most Arctic countries emphasize the importance of a nutritious diet. Contaminant-related restrictions are mostly based on mercury; a limited amount of dietary advice is based on other contaminants. While more information on effectiveness evaluation was available, specific information, particularly from Arctic countries other than Canada, is still very limited.

Electrochemical sensing at the fingertips: wearable glove-based sensors for detection of 4-nitrophenol, picric acid and diazepam.

A wearable glove-based sensor is a portable and practical approach for onsite detection/monitoring of a variety of chemical threats. Herein, we report a flexible and sensitive wearable sensor fabricated on the nitrile glove fingertips by stencil-printing technique. The working electrodes were modified with multiwalled carbon nanotubes (MWCNTs)/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) for sensitive and real-time analyses of hazardous or chemical treats, as picric acid (PA) explosive, diazepam (DZ) as drug-facilitated crimes and the emerging pollutant 4-nitrophenol (4-NP). The multi-sensing platform towards PA, 4-NP, and DZ offers the ability of in-situ qualitative and quantitative analyses of powder and liquid samples. A simple sampling by touching or swiping the fingertip sensor on the sample or surface under investigation using an ionic hydrogel combined with fast voltammetry measurement provides timely point-of-need analyses. The wearable glove-based sensor uses the square wave voltammetry (SWV) technique and exhibited excellent performance to detect PA, 4-NP, and DZ, resulting in limits of detection (LOD) of 0.24 µM, 0.35 µM, 0.06 µM, respectively, in a wide concentration range (from 0.5 µM to 100 µM). Also, we obtained excellent manufacturing reproducibility with relative standard deviations (RSD) in the range of 3.65% to 4.61% using 7 different wearable devices (n=7) and stability in the range of 4.86% to 6.61% using different electrodes stored for 10 days at room temperature (n=10), demonstrating the excellent sensor-to-sensor reproducibility and stability for reliable in-field measurements. The stretchable sensor presented great mechanical robustness, supporting up to 80 bending or stretching deformation cycles without significant voltammetric changes. Collectively, our wearable glove-based sensor may be employed for analyses of chemical contaminants of concern, such as explosives (PA), drugs (DZ), and emerging pollutants (4-NP), helping in environmental and public safety control.

Analysis of chemical contaminants in fish using high resolution mass spectrometry - A review.

High resolution mass spectrometry (HRMS) has become an important tool in environmental and food safety analysis. This review highlights how HRMS has been used to analyze chemical contaminants in fish. Measuring and documenting chemical contaminants in fish serves not only as an indicator of environmental conditions but can also monitor the health of these animals and help protect an important source of human food. The incidence and significance of contaminants including veterinary drugs, human drugs and personal care products, pesticides, persistent organic pollutants, per- and poly fluorinated substances, and marine toxins will be reviewed. The advantage of HRMS over traditional MS is its ability to expand the number of compounds that can be detected and identified. This is true whether HRMS is used for targeted analytes, or more broadly for suspect screening and nontargeted analyses. The classes of compounds, types of fish or seafood, options for data acquisition and analysis, and reports of unexpected findings from recent HMRS methods for chemical contaminants in fish are summarized.

Homogeneous to heterogeneous redox mediator enhancing ferrate(VI) oxidation of sulfamethoxazole: Role of ferrate(VI) activation and electron shuttle.

Ferrate (Fe(VI)) is a promising oxidant for water remediation, yet it has limited reactivity towards certain recalcitrant but important emerging contaminants, such as sulfamethoxazole. Here, this study demonstrates that nitroxide redox mediators, specifically 9-azabicyclo[3.3.1]nonasne N-oxyl (ABNO), can catalyze Fe(VI) reaction with sulfamethoxazole by functioning both as Fe(VI) activator and electron shuttle. The underlying mechanism is explained as: (i) Fe(VI) activation: a series of one-electron transfers between Fe(VI) and ABNO produces highly reactive Fe(V)/Fe(IV) and ABNO+; (ii) electron shuttle: the newly formed active ABNO+ reacts with the sulfamethoxazole, contributing to its removal. Concurrently, ABNOH is generated and subsequently converted back to ABNO by reactive species, thereby completing the redox cycle. The as-developed heterogeneous redox mediator, ABNO@SiO2, retained its catalytic properties and effectively catalyzed Fe(VI) to remove sulfamethoxazole at environmentally relevant pH levels.

Bioconcentration of pharmaceuticals by aquatic flora in an Australian river system.

Pharmaceuticals are emerging contaminants in the environment and are a ubiquitous presence in rivers downstream of wastewater treatment plant outfalls. Questions remain about the persistence of pharmaceuticals in rivers, and the uptake and bioconcentration of pharmaceuticals by aquatic plants. Our study took place in the Yarrowee/Leigh/Barwon River system in southeastern Australia. We quantified the concentrations of five pharmaceuticals (carbamazepine, primidone, propranolol, tramadol, and venlafaxine) in surface water at five sites along a 144-km stretch of river, downstream of the presumed primary point source (a wastewater treatment plant outfall). We quantified pharmaceuticals in the leaves of two aquatic plant species (Phragmites australis and Vallisneria australis) sampled at each site, and calculated bioconcentration factors. All five pharmaceuticals were detected in surface waters, and the highest detected concentration exceeded 500 ng.L-1 (tramadol). Four of the pharmaceuticals (all except tramadol) were detected and quantified at all sites, including the furthest site from the outfall (144 km). Carbamazepine showed less attenuation with distance from the outfall than the other pharmaceuticals. Carbamazepine and venlafaxine were quantified in the leaves of both aquatic plant species (range: 10-31 ng.g-1), and there was evidence that bioconcentration factors increased with decreasing surface water concentrations. The study demonstrates the potential long-distance persistence of pharmaceuticals in river systems, and the bioconcentration of pharmaceuticals by aquatic plants in natural ecosystems. These phenomena deserve greater attention as aquatic plants are a potential point of transfer of pharmaceuticals from aquatic ecosystems to terrestrial food webs.

Passive sampler housing and sorbent type determine aquatic micropollutant adsorption and subsequent bioassay responses.

The combination of integrative passive sampling and bioassays is a promising approach for monitoring the toxicity of polar organic contaminants in aquatic environments. However, the design of integrative passive samplers can affect the accumulation of compounds and therewith the bioassay responses. The present study aimed to determine the effects of sampler housing and sorbent type on the number of chemical features accumulated in polar passive samplers and the subsequent bioassay responses to extracts of these samplers. To this end, four integrative passive sampler configurations, resulting from the combination of polar organic chemical integrative sampler (POCIS) and Speedisk housings with hydrophilic-lipophilic balance and hydrophilic divinylbenzene sorbents, were simultaneously exposed at reference and contaminated surface water locations. The passive sampler extracts were subjected to chemical non-target screening and a battery of five bioassays. Extracts from POCIS contained a higher number of chemical features and caused higher bioassay responses in 91% of cases, while the two sorbents accumulated similar numbers of features and caused equally frequent but different bioassay responses. Hence, the passive sampler design critically affected the number of accumulated polar organic contaminants as well as their toxicity, highlighting the importance of passive sampler design for effect-based water quality assessment.

Impacts of cattle management and agricultural practices on water quality through different approaches: physicochemical and ecotoxicological parameters.

The intensification of livestock farming can pose risks to the environment due to the increased use of veterinary products and the generation of waste in confined areas. The quality of water bodies near livestock establishments (Areco River (A) and Doblado stream (D), San Antonio de Areco, Buenos Aires, Argentina) was studied by physicochemical parameters, metals, pesticides, emerging contaminants, and lethal and sublethal toxicity (neurotoxicity and oxidative stress) in larvae of the native amphibian Rhinella arenarum. Six sites were selected: upstream (S1A and S1D), at the level (S2A and S2D), and downstream (S3A and S3D) from the establishments. A low concentration of dissolved oxygen was observed in Doblado stream (< 2.34 mg/L). Cu, Mn, V, and Zn exceeded the limits for the protection of aquatic life at various sites. Between 24 and 34 pesticides were detected in all sites, with 2,4-D, atrazine, and metolachlor being the most recurrent. In water and sediment, the concentrations of ivermectin (S2A, 1.32 µg/L and 58.18 µg/kg; S2D, 0.8 µg/L and 85.22 µg/kg) and oxytetracycline (S2A, < 1 mg/L and < 1 mg/kg; S2D, 11.8 mg/L and 39 mg/kg) were higher at sites near the establishments. All sites caused between 30 and 38.3% of lethality and produced neurotoxicity and alterations in the reduced glutathione content. Moreover, larvae exposed to samples from all sites incorporated ivermectin. These results demonstrate the degradation of the studied sites in relation to the agricultural activities of the area, highlighting the need to take measures to protect and preserve aquatic ecosystems.

Balancing aquaculture and estuarine ecosystems: machine learning-based water quality indices for effective management.

This study delves into the environmental impact of inland aquaculture on estuarine ecosystems by examining the water quality of four estuarine streams within the key inland aquaculture zone of South India. In this region, extensive and intensive aquaculture practices are common, posing potential challenges to estuarine health. The research explores the predictive capabilities of the Gaussian elimination method (GEM) and machine learning techniques, specifically multi-linear regression (MLR) and support vector regressor (SVR), in forecasting the water quality index of these streams. Through comprehensive evaluation using performance metrics such as coefficient of determination (R2) and average mean absolute percentage error (MAPE), MLR and SVR demonstrate higher prediction efficiency. Notably, employing key water parameters as inputs in machine learning models is also more effective. Biochemical oxygen demand (BOD) emerges as a critical water parameter, identified by both MLR and SVR, exhibiting high specificity in predicting water quality. This suggests that MLR and SVR, incorporating key water parameters, should be prioritized for future water quality monitoring in intensive aquaculture zones, facilitating timely warnings and interventions to safeguard water quality.

Hierarchically design MoS2/CdNi@RGO ultra-thin hybrid sheet for Photocatalytically degradation of Organic Contaminants fingerprinting in environmental matrices.

The aim of this study was to synthesize effective and economical MoS2/CdNi@rGO photocatalysts and investigate their performance in the degradation of organic pollutants in synthetic effluent. The objective was to assess the characterization results of the synthesized photocatalysts using XRD, SEM/EDS, TEM/HR-TEM, Raman spectrum, and BET isotherm analysis tools. These analyses revealed the good adhesion of MoS2 with rGO and provided insights into the structure and properties of the materials. The results showed that the MoS2/CdNi@rGO photocatalysts exhibited remarkable degradation efficiency for organic pollutants such as Rhodamine-B, erichrome black, and malachite green. The outcomes of the study demonstrated that the MoS2/CdNi@rGO catalyst had the greatest rate constant for Rhodamine-B (RhB) decomposition. which would have been approximately 33 times higher than that of pure RGO (0.0121 min-1). The MoS2/CdNi@rGO photocatalysts also showed excellent recyclability and persistence across five recycle assays, indicating their potential for practical applications in wastewater treatment. The photocatalyst was moderately active, stable up to its fifth usage and stability of the photocatalyst before and after the photocatalytic reaction was also been studied using XRD and SEM. Further research in this area could lead to the development of advanced photocatalytic technologies for environmental remediation.

Experimental study on migration characteristics of LNAPL in the aquitard under pumping conditions.

Research on the migration behaviors of contaminants in the aquitard has been deficient for an extended period. Clay is commonly employed as an impermeable layer or barrier to stop the migration of contaminants. However, under certain conditions, the clay layer may exhibit permeability to water, thereby allowing contaminants to infiltrate and potentially contaminate adjacent aquifers. Consequently, it holds immense importance to scrutinize and investigate the migration characteristics of light non-aqueous phase liquid (LNAPL) within the aquitard for the purposes of groundwater pollution control and remediation. To evaluate the environmental risk posed by organic contaminants in the aquitard, an experimental model was formulated and devised to monitor the LNAPL concentration in the aquitard under pumping conditions. The correlation between pumping rate and LNAPL concentration was investigated. A self-developed plexiglass sandbox model was used to simulate the migration characteristics of LNAPL in the aquitard under pumping conditions. Four experimental scenarios were designed, varying pumping rates, aquitard thicknesses, and groundwater level changes. The LNAPL concentration curve was derived by systematically tracking and analyzing LNAPL levels at various locations within the aquitard. The results indicated that higher pumping rates corresponded to increased migration of LNAPL, resulting in greater LNAPL ingress into the pumping well during extraction. A thicker aquitard demonstrated a more pronounced inhibitory effect on LNAPL, leading to an extended penetration time of LNAPL within the aquitard. The drawdown within the aquitard exerted a discernible influence on LNAPL migration, with the LNAPL concentration continuing to decrease in tandem with declining water levels during pumping. These research findings can establish a scientific foundation for the control and remediation of contaminants within aquitards.

Coconut shell-based biochars produced by an innovative thermochemical process for obtaining improved lignocellulose-based adsorbents.

The urgent need for a simple and cost-effective thermochemical process to produce biochar has prompted this study. The aim was to develop a straightforward thermochemical process under O2-limited conditions for the production of coconut-based biochar (CBB) and to assess its ability to remove methylene blue (MB) through adsorption, comparing it with CBB produced by slow pyrolysis. CBBs were obtained under different atmospheric conditions (O2-limited, muffle furnace biochar (MFB); and inert, pyrolytic reactor biochar (PRB)), at 350, 500, and 700 °C, and for 30 and 90'. MFB and PRB were characterized using FTIR, RAMAN, SEM, EDS, and XRD analyses. Adsorption tests were conducted using 1.0 g L-1 of MFB and PRB, 10 mg L-1 of MB at 25 °C for 48 h. Characterization revealed that atmospheric conditions significantly influenced the yield and structural features of the materials. PRB exhibited higher yields and larger cavities than MFB, but quite similar spectral features. Adsorption tests indicated that MFB and PRB had qt values of 33.1 and 9.2 mg g-1, respectively, which were obtained at 700 °C and 90', and 700 °C and 30', respectively. This alternative method produced an innovative and promising lignocellulose-based material with great potential to be used as a biosorbent.

Determination and risk assessment of UV filters and benzotriazole UV stabilizers in wastewater from a wastewater treatment plant in Lüneburg, Germany.

UV filters and benzotriazole UV stabilizers are considered emerging contaminants in the environment. LC-MS/MS and GC-MS methods, involving a single solid phase extraction protocol, were developed and validated to determine eight UV filters and seven UV stabilizers, respectively in wastewater from a wastewater treatment plant (WWTP) in Lüneburg, Germany. The LC-MS/MS method exhibited extraction recoveries of ≥ 71% at six different fortification levels with limits of detection (LODs) range of 0.02 ng mL-1 - 0.09 ng mL-1. Extraction recoveries of 47 to 119% at six different fortification levels were obtained for the GC-MS method with LODs range of 0.01 - 0.09 ng mL-1. Among the UV filters, the highest mean concentration was determined for octocrylene (OCR) in influent (3.49 ng mL-1) while the highest mean concentration was measured for 2-hydroxy-4-octyloxybenzophenone (UV 531) in influent (0.44 ng mL-1) among the UV stabilizers. Potential risk to aquatic organisms was assessed by the risk quotient approach. Only OCR presented a high risk to aquatic invertebrates whereas 2-ethylhexyl 4-methoxycinnamate (EHMC) and 2-ethylhexyl salicylate (EHS) posed high risks to algae. Benzotriazole UV stabilizers presented negligible risks to aquatic invertebrates and fish. This work reports the detection of rarely studied 4-aminobenzoic acid (PABA) and UV 531 in WWTP influent and effluent. The occurrence and risk assessment of target benzotriazole UV stabilizers in wastewater from a German WWTP was demonstrated for the first time.

Ensuring food safety: Microfluidic-based approaches for the detection of food contaminants.

Detecting foodborne contamination is a critical challenge in ensuring food safety and preventing human suffering and economic losses. Contaminated food, comprising biological agents (e.g. bacteria, viruses and fungi) and chemicals (e.g. toxins, allergens, antibiotics and heavy metals), poses significant risks to public health. Microfluidic technology has emerged as a transformative solution, revolutionizing the detection of contaminants with precise and efficient methodologies. By manipulating minute volumes of fluid on miniaturized systems, microfluidics enables the creation of portable chips for biosensing applications. Advancements from early glass and silicon devices to modern polymers and cellulose-based chips have significantly enhanced microfluidic technology, offering adaptability, flexibility, cost-effectiveness and biocompatibility. Microfluidic systems integrate seamlessly with various biosensing reactions, facilitating nucleic acid amplification, target analyte recognition and accurate signal readouts. As research progresses, microfluidic technology is poised to play a pivotal role in addressing evolving challenges in the detection of foodborne contaminants. In this short review, we delve into various manufacturing materials for state-of-the-art microfluidic devices, including inorganics, elastomers, thermoplastics and paper. Additionally, we examine several applications where microfluidic technology offers unique advantages in the detection of food contaminants, including bacteria, viruses, fungi, allergens and more. This review underscores the significant advancement of microfluidic technology and its pivotal role in advancing the detection and mitigation of foodborne contaminants.

Synergistic impacts of antibiotics and heavy metals on Hermetia illucens: Unveiling dynamics in larval gut bacterial communities and microbial metabolites.

Hermetia illucens larvae showcases remarkable bioremediation capabilities for both antibiotics and heavy metal contaminants. However, the distinctions in larval intestinal microbiota arising from the single and combined effects of antibiotics and heavy metals remain poorly elucidated. In this study, we delved into the details of larval intestinal bacterial communities and microbial metabolites when exposed to single and combined contaminants of oxytetracycline (OTC) and hexavalent chromium (Cr(VI)). After conversion, single contaminant-spiked substrate showed 75.5% of OTC degradation and 95.2% of Cr(VI) reductiuon, while combined contaminant-spiked substrate exhibited 71.3% of OTC degradation and 93.4% of Cr(VI) reductiuon. Single and combined effects led to differences in intestinal bacterial communities, mainly reflected in the genera of Enterococcus, Pseudogracilibacillus, Gracilibacillus, Wohlfahrtiimonas, Sporosarcina, Lysinibacillus, and Myroide. Moreover, these effects also induced differences across various categories of microbial metabolites, which categorized into amino acid and its metabolites, benzene and substituted derivatives, carbohydrates and its metabolites, heterocyclic compounds, hormones and hormone-related compounds, nucleotide and its metabolites, and organic acid and its derivatives. In particular, the differences induced OTC was greater than that of Cr(VI), and combined effects increased the complexity of microbial metabolism compared to that of single contaminant. Correlation analysis indicated that the bacterial genera, Preudogracilibacillus, Enterococcus, Sporosarcina, Lysinibacillus, Wohlfahrtiimonas, Ignatzschineria, and Fusobacterium exhibited significant correlation with significant differential metabolites, these might be used as indicators for the resistance and bioremediation of OTC and Cr(VI) contaminants. These findings are conducive to further understanding that the metabolism of intestinal microbiota determines the resistance of Hermetia illucens to antibiotics and heavy metals.

Advances in the process-based models of constructed wetlands and a way forward for integrating emerging organic contaminants.

This research examines advancements in the development of process-based models of constructed wetlands (CWs) tailored for simulating conventional water quality parameters (CWQPs). Despite the promising potential of CWs for emerging organic contaminant (EOC) removal, the available CW models do not yet integrate EOC removal processes. This study explores the need and possibility of integrating EOCs into existing CW models. Nevertheless, a few researchers have developed process-based models of other wastewater treatment systems (e.g., activated sludge systems) to simulate certain EOCs. The EOC removal processes observed in other wastewater treatment systems are analogous to those in CWs. Therefore, the corresponding equations governing these processes can be tailored and integrated into existing CW models, similarly to what was done successfully in the past for CWQPs. This study proposed the next generation of CW models, which outlines 12 areas for future work: integrating EOC removal processes; ensuring data availability for model calibration and validation; considering quantitative and sensitive parameters; quantifying microorganisms in CWs; modifying biofilm dynamics models; including pH, aeration, and redox potential; integrating clogging and plant sub-models; modifying hydraulic sub-model; advancing computer technology and programming; and maintaining a balance between simplicity and complexity. These suggestions provide valuable insights for enhancing the design and operational features of current process-based models of CWs, facilitating improved simulation of CWQPs, and integration of EOCs into the modelling framework.

Microplastic-stressor responses are rarely synergistic in freshwater fishes: A meta-analysis.

Microplastic exposure can cause a range of negative effects on the biochemistry, condition and ecology of freshwater fishes depending on aspects of the exposure and the exposed fish. However, fishes are typically exposed to microplastics and additional multiple stressors simultaneously, for which the combined effects are poorly understood and may have important management consequences. Additive effects are those where the combined effect is equal to the sum, antagonistic where combined effects are less than the sum and for synergistic effects the combined effect is greater to the sum of the individual effects. Here, we performed a meta-analysis of studies recording freshwater fish responses to microplastic-stressor exposures to test if interactions were primarily non-additive (synergistic or antagonistic), and factors impacting the net response. Individual responses were classified (antagonistic/additive/synergistic) and the fit of net responses to a null additive model determined for 838 responses (36 studies) split by categorical variables for the microplastic exposure (environmental relevance, interacting stressor, microplastic morphology and response category measured), as well as the exposed fish (lifestage, ecology and family). Most responses were classified as antagonistic (48 %) and additive (34 %), with synergistic effects least frequent (17 %). Net responses fitted null additive models for all levels of interacting stressor, fish family and microplastic morphology. In contrast, net antagonism was present for biochemical responses, embryo lifestages, environmentally relevant microplastic exposures and fish with benthopelagic ecology, while synergism was identified for fishes with demersal ecology. While substantial knowledge gaps remain and are discussed, the data thus far suggest microplastic-stressor responses in freshwater fishes are rarely synergistic and, therefore, addressing either or both stressors will likely result in positive management and biological outcomes.

Mercury exposure and trophic ecology of urban nesting black-legged kittiwakes from France.

Seabirds are increasingly used as bioindicators for assessing the chemical contamination of marine ecosystems, including mercury (Hg) worldwide. However, some geographical areas are still poorly documented, as Metropolitan France that is home to 28 seabird species including the black-legged kittiwake Rissa tridactyla, in the part of the southern limit of the North Atlantic range of the species. Here, we investigated Hg contamination and trophic ecology of black-legged kittiwakes breeding in the harbour of Boulogne-sur-Mer, Northern France. Mean blood Hg concentration was 4.81 ± 1.20 µg g-1 dw (dry weight), 3.66 ± 0.75 µg g-1 dw and 0.43 ± 0.07 µg g-1 dw for adult males, adult females, and chicks, respectively. According to Hg toxicity benchmarks for avian blood, 30% of the sampled adults were considered to be at moderate risk to Hg toxicity. Stable isotope and food analyses showed that highest δ15N values (reflecting a higher trophic position) were related to highest blood Hg concentrations in adult birds, and that Atlantic herring (Clupea harengus) and Atlantic mackerel (Scomber scombrus) were the main prey. Adult kittiwakes from Boulogne-sur-Mer showed Hg levels three times higher than those found in Arctic nesting kittiwakes, where sublethal effects have been documented. This study provides a first description of Hg contamination of black-legged kittiwakes breeding in France and calls for future ecotoxicological research to assess the vulnerability of this species in the southern part of its distribution range.

Surface Cleaning of Oil Contaminants Using Bulk Nanobubbles.

The removal of oil from solid surfaces, such as textiles and plates, remains a challenge due to the strong binding affinity of the oil. Conventional methods for surface cleaning often require surfactants and mechanical abrasion to enhance the cleaning process. However, in excess, these can pose adverse effects on the environment and to the material. This study investigated how bulk nanobubble water can clean oil microdroplets deposited on surfaces like glass coverslips and dishes. Microscopy imaging and further image analysis clearly revealed that these microdroplets detached from both hydrophobic and hydrophilic surfaces when washed with bulk nanobubble water within a fluidic microchannel. Oil contaminant cleaning was also conducted in water as mobile phase to mimic the circumstances that occur in a dishwasher and washing machine. Cleaning on a larger scale also proved very successful in the removal of oil from a porcelain bowl. These results indicate that nanobubble water can easily remove oil contaminants from glass and porcelain surfaces without the assistance of surfactants. This is in stark contrast to negligible results obtained with a control solution without nanobubbles. This study indicates that nanobubble technology is an innovative, low-cost, eco-friendly approach for oil removal, demonstrating its potential for broad practical applications.

Effects of Harmful Algal Blooms on Amphibians and Reptiles are Under-Reported and Under-Represented.

Harmful algal blooms (HABs) are a persistent and increasing problem globally, yet we still have limited knowledge about how they affect wildlife. Although semi-aquatic and aquatic amphibians and reptiles have experienced large declines and occupy environments where HABs are increasingly problematic, their vulnerability to HABs remains unclear. To inform monitoring, management, and future research, we conducted a literature review, synthesized the studies, and report on the mortality events describing effects of cyanotoxins from HABs on freshwater herpetofauna. Our review identified 37 unique studies and 71 endpoints (no-observed-effect and lowest-observed-effect concentrations) involving 11 amphibian and 3 reptile species worldwide. Responses varied widely among studies, species, and exposure concentrations used in experiments. Concentrations causing lethal and sublethal effects in laboratory experiments were generally 1 to 100 µg/L, which contains the mean value of reported HAB events but is 70 times less than the maximum cyanotoxin concentrations reported in the environment. However, one species of amphibian was tolerant to concentrations of 10,000 µg/L, demonstrating potentially immense differences in sensitivities. Most studies focused on microcystin-LR (MC-LR), which can increase systemic inflammation and harm the digestive system, reproductive organs, liver, kidneys, and development. The few studies on other cyanotoxins illustrated that effects resembled those of MC-LR at similar concentrations, but more research is needed to describe effects of other cyanotoxins and mixtures of cyanotoxins that commonly occur in the environment. All experimental studies were on larval and adult amphibians; there were no such studies on reptiles. Experimental work with reptiles and adult amphibians is needed to clarify thresholds of tolerance. Only nine mortality events were reported, mostly for reptiles. Given that amphibians likely decay faster than reptiles, which have tissues that resist decomposition, mass amphibian mortality events from HABs have likely been under-reported. We propose that future efforts should be focused on seven major areas, to enhance our understanding of effects and monitoring of HABs on herpetofauna that fill important roles in freshwater and terrestrial environments. Environ Toxicol Chem 2024;00:1-14. Published 2024. This article is a U.S. Government work and is in the public domain in the USA. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Emerging contaminants in water environments: progress, evolution, and prospects.

This article employs bibliometric tools like VOSviewer, Bibliometrix, and CiteSpace for a comprehensive visual analysis of 1,612 documents on Emerging Contaminants in Waters from the Web of Science database. The objective is to elucidate the historical development, research hotspots, and trends in international studies of this field, offering valuable insights and guidance for future research directions. The analysis reveals a consistent increase in publications from 2003 to 2023, with the United States, China, and Spain being the most prolific contributors. A detailed examination of keyword co-occurrence and cluster analysis shows a predominant focus on themes such as pollutant detection, risk assessment, and biogeochemical cycling. Furthermore, the study underscores the significance of forming interdisciplinary networks among authors and institutions, highlighting its critical role in enhancing the quality and innovation of scientific research. The findings of this study not only chart the progression and focal points of research in this domain but also underscore the pivotal role of international collaboration, serving as an indispensable reference for shaping future research trajectories and fostering global cooperation.