Evaluation of TEM specimen quality prepared by focused ion beam using symmetry breaking index of convergent-beam electron diffraction.

Degradation of the crystalline quality of transmission electron microscopy specimens in silicon prepared with different conditions has been examined using convergent-beam electron diffraction (CBED). The specimens are prepared using focused ion beam (FIB) with different accelerating voltages, Ar-ion milling and crushing method. Symmetry breaking of CBED patterns was quantitatively evaluated by symmetry breaking index S, which has been previously reported. The degradation and inhomogeneity of the FIB specimen were suppressed by decreasing the accelerating voltages of the FIB fabrication in the final process.

Mechanical activation to enhance the natural floatability of waste printed circuit boards.

The metal in the waste printed circuit boards (WPCBs) is an excellent secondary metal resource. WPCBs were ground to dissociate, and impurities in the dissociated product were removed by gradient flotation to recover valuable metals in this study. The effects of crushing methods on size composition and dissociation state of the crushed products were studied. Then the gradient flotation experiment was designed to verify the natural floatability of ground materials. Grinding test shows that impact crushing has greater grinding fineness (-0.074 mm) than shear crushing, which is 42.14% and 26.18% respectively with 5 min grinding. The flotation test results illustrate that the natural floatability of impurities increases with the grinding fineness, that is, the yield of floats increases without flotation reagents. For impact crushing and shear crushing, the floats yields are 38.48% and 31.75% respectively, accompanied by 70.53% and 65.46% impurity removal for ground materials with 5 min grinding. Subsequently, 21.61% and 26.35% of impurities can be further removed with the aid of collector. Finally, the recovery of Cu in concentrate reaches 67.84% and 65.75%, respectively. FT-IR proves that the excellent floatability of particles is caused by the significant hydrophobic group. Mechanical grinding has been proved to have double effects of improving dissociation and natural floatability.

The Impact of Stump Closure Techniques on Pancreatic Fistula Stratified by the Thickness of the Pancreas in Distal Pancreatectomy.

BACKGROUND: The purpose of this retrospective study was to evaluate the impact of stump closure techniques on pancreatic fistula (PF) focusing on pancreatic thickness after distal pancreatectomy (DP). METHODS: A total of 213 patients who underwent DP between 2007 and 2017 were retrospectively reviewed. The risk factors of PF were investigated. RESULTS: In all patients, age ≥65 years (odds ratio [OR]: 3.60, p = 0.012), operation time ≥300 min (OR: 3.05, p = 0.013) and thickness of transected pancreas (OR: 1.37, p < 0.001) were identified as independent risk factors for clinically relevant PF. A receiver operating curve analysis revealed the optimum cut-off values of thickness to be 14 mm with stapler closure and 17 mm with the clamp-crushing method. There were no significant differences regarding PF between the stapler closure and clamp-crushing methods in the thin (<14 mm) and very thick pancreas (≥17 mm) groups (p = 0.822, p = 0.072). In contrast, stapler closure was the only independent risk factor for developing PF in the moderately thick (≥14, <17 mm) pancreas group (OR: 6.75 and p = 0.004, respectively). CONCLUSION: The clamp-crushing method was superior to stapler closure for pancreatic transection, especially in patients with moderately thick pancreas.

Aggregates Obtained by Alkali Activation of Fly Ash: The Effect of Granulation, Pelletization Methods and Curing Regimes.

This paper presents results regarding the phase composition, microstructure and textural properties of two types of aggregates, which were prepared via crushing or pelletization of alkali-activated Class F fly ash and cured under different conditions. The alkali activator was the same for aggregate products, containing an alkaline solution consisting of 8 M NaOH and Na-silicate (8 M NaOH/Na-silicate = 1:2.5 mass ratio). The aforementioned properties were influenced by two different preparation procedures combined with varying curing regimes (under normal conditions at 20 °C, RH 40⁻60% for 28 and 120 days and under an accelerated regime, at 65 °C for 5 days). Aggregates were characterized using X-ray diffraction (XRD), Fourier-transform transmission infrared spectroscopy (FTIR), back scattered electron microscopy with energy dispersive spectrometer (BSE-EDS) analyses and mercury intrusion porosimetry (MIP). The results showed noteworthy structural and textural diversities between the two types of aggregate. The method of preparation and curing regime affected the formation of the N-A-S-H structure and the texture of the alkali-activated fly ash product, with the crushing method giving an advantage.

Survey on Accumulated Drug Information by Pharmaceutical Companies about Crushed or Simply Suspended Internal Medicines / 医薬品情報学

Objective: We conducted a survey on drug information accumulated by pharmaceutical companies about the adequacy of administration of crushed or simply suspended internal medicines through enteral feeding tube, examination methods to confirm adequacy and inquiries from medical institutions to pharmaceutical companies about the adequacy of these methods.Methods: We sent a questionnaire to 162 pharmaceutical companies that sell internal medicines to collect information. The survey was conducted from May 1, 2016 to March 31, 2017.Results: The questionnaire response rate was 61% (99 companies responded). Eighty and 90 percent of the companies possessed information about the drug crushing methods and simple suspension methods used for administration of internal medicines,respectively. The type of information and examination methods used varied among the companies, was very limited, and was often limited to new drugs. The information acquisition rate about crushing methods was 69.3% in original examination methods of pharmaceutical companies. On the other hand, 90.3% of the information about simple suspension methods was obtained by the unified method of Hand Book of Simple Suspension Method.Conclusions: In the future, medical practice and patients will benefit if examination methods to confirm the adequacy of crushing and administration through feeding tubes are commonly and consistently obtained by pharmaceutical companies. Furthermore, it would be very useful for information of crushing methods and simple suspension methods to be included in package inserts and interview forms.