Finite Element Analysis and Experimental Study of Manufacturing Thin-Walled Five-Branched AISI 304 Stainless Steel Tubes with Different Diameters Using a Hydroforming Process.

This study aims to investigate the feasibility of hydroforming (HF) technology coupled with response surface optimization for producing high-quality five-branched AISI 304 stainless steel tubes with different diameters, addressing the shortcomings of traditional manufacturing processes. Conventional techniques often result in issues with multiple consumables, low precision, and subpar performance. The research focuses on finding optimal forming parameters for a more effective process. Initial attempts at a five-branched tube proved unfeasible. Instead, a multi-step forming approach was adopted, starting with the formation of the upper branch tube followed by the two reducing lower branch tubes, a strategy termed "first three, then five". This method, enhanced by a subsequent solid solution treatment, yielded promising results: the combined height of the upper and lower branches was 141.1 mm, with a maximum thinning rate of 26.67%, reduced to 25.33% after trimming. These outcomes met the product usage requirements. Additionally, the study involved designing and developing dies for manufacturing five-branched tubes with different diameters using servo HF equipment. The effectiveness of the multi-step forming process and parameter combinations was confirmed through experimental validation, aligning closely with the FE simulation results. The maximum thinning rate observed in the experiments was 27.60%, indicating that FE simulation and response surface methodology can effectively guide the production of high-quality parts with superior performance.

Responses of Fine Roots at Different Soil Depths to Different Thinning Intensities in a Secondary Forest in the Qinling Mountains, China.

Fine roots make critical contributions to carbon stocks and terrestrial productivity, and fine roots with different diameters exhibit functional heterogeneity. However, the changed characteristics of fine roots with different diameters at different soil depths following thinning disturbances are poorly understood. We investigated the biomass, production, mortality and turnover rate of <0.5 mm, 0.5−1 mm, and 1−2 mm fine roots at 0−20 cm, 20−40 cm, and 40−60 cm soil depths under five thinning intensities (0%, 15%, 30%, 45%, and 60%) in a secondary forest in the Qinling Mountains. The biomass, production and turnover rate of <0.5 mm fine roots fluctuated with increasing thinning intensities, while the 0.5−1 mm and 1−2 mm fine-root biomass significantly decreased. The thinning intensities had no effects on the fine-root necromass or mortality. The change in the fine-root characteristics in deeper soils was more sensitive to the thinning intensities. The principal component analysis results showed that increased <0.5 mm fine-root biomass and production resulted from increased shrub and herb diversity and biomass and decreased soil nutrient availability, stand volume, and litter biomass, whereas the 0.5−1 mm and 1−2 mm fine-root biomass showed the opposite trends and changes. Our results suggest that different thinning intensities exhibit varied influential mechanisms on the changed characteristics of fine roots with different diameters.

Effects of Fiber Diameter on Crack Resistance of Asphalt Mixtures Reinforced by Basalt Fibers Based on Digital Image Correlation Technology.

It is now more popular to use basalt fibers in the engineering programs to reinforce the crack resistance of asphalt mixtures. However, research concerning the impact of the basalt fiber diameter on the macro performance of AC-13 mixtures is very limited. Therefore, in this paper, basalt fibers with three diameters, including 7, 13 and 25 µm, were selected to research the influences of fiber diameter on the crack resistance of asphalt mixtures. Different types of crack tests, such as the low temperature trabecular bending test (LTTB), the indirect tensile asphalt cracking test (IDEAL-CT), and the semi-circular bend test (SCB), were conducted to reveal the crack resistance of AC-13 mixtures. The entire cracking process was recorded through the digital image correlation (DIC) technique, and the displacement cloud pictures, strain, average crack propagation rate (V) and fracture toughness (FT) indicators were used to evaluate the crack inhibition action of the fiber diameter on the mixture. The results showed that the incorporation of basalt fiber substantially improved the crack resistance, slowed down the increase of the displacement, and delayed the fracture time. Basalt fiber with a diameter of 7 µm presented the best enhancement capability on the crack resistance of the AC-13 mixture. The flexibility index (FI) of the SCB test showed a good correlation with V and FT values of DIC test results, respectively. These findings provide theoretical advice for the popularization and engineering application of basalt fibers in asphalt pavement.

Dosimetry comparison of esophageal stents carrying different diameters of radioactive 125I seeds / 介入放射学杂志

Objective To investigate the dose distribution of esophageal stents carrying different diameters of radioactive 125I seeds in tumor target area. Methods A laser scanner was used to scan a piece of blank paper on which circles of 12 mm, 14 mm and 16 mm diameter and a 5 cm scale were drawn. The data were stored in JPEF format on the computer desktop. According to the circular diameter, simulations of the corresponding esophageal stents were established, which were divided into group A, group B and group C. By using image conversion program, 17 images with 5 mm slice-distance were created for each group; the images were transmitted to the computer treatment planning system (TPS) to simulate the 8 cm long esophageal stents of different diameters. TPS was used to sketch the gross tumor volume (GTV) in order to simulate the esophageal stent border that was used as the inner boundary of GTV, which was expanded 0.5 cm outward to be used as the external boundary of GTV. Beginning from the fifth level, the 4 cm-long GTV was drawn with circles. Setting the same prescription dose, from the fifth level to the thirteenth level the 125I seeds with 0.3, 0.4, 0.5, 0.6, 0.7, 0.8 and 0.9 mCi were successively loaded on the simulation of the esophageal stents. The distance between 125I seed layers was 1 cm; the average number of seeds distributed on each layer was 4 particles. The dose volume histogram (DVH) was obtained. The D90 (the dose received by 90% of the target) and V90 (the percentage of the GTV volume receiving 90% the prescription dose) were recorded.Result s The arithmetic mean D90 of group A, B and C was (77.24 ±19.92) Gy, (69.56 ±25.27) Gy and (56.38±20.08) Gy respectively, and no statistically significant differences existed between each other among the three groups (F=0.84,P=0.44). The V90 of group A, B and C was (77.76±30.73)%,(76.79±25.92)%and (64.10 ±32.49)% respectively, and no statistically significant differences existed between each other among the three groups (F=0.46,P=0.64). Conclusion When the diameter of radioactive esophageal stent is 12 mm, the activity of 125I seed of 0.6 mCi is recommended. When the diameter of radioactive esophageal stent is 14 mm or 16 mm, the activity of 125I seed of 0.7 mCi is recommended. Nevertheless, when the diameter of radioactive esophageal stent is 16 mm, distribution of every five 125I seeds on each layer is strongly recommended. These three kinds of esophageal stent diameter have no significant effect on the dosimetric parameters.