Characterization of O/W emulgels based on whey protein-alginate-inulin coacervates: Influence of temperature and ultrasound as protein preconditioning process.

Preconditioning processes in proteins play a crucial role in enhancing their functional properties as surface active agents. Whey protein isolate (WPI, 20 wt%) was preconditioned via temperature (WPIT, 90 °C) or ultrasound (WPIUS, 20 kHz, 80 % amplitude). FTIR and zeta potential analysis demonstrated the effect of the preconditioning process on the secondary structure and surface properties of WPI. WPI-Alginate:Inulin (AI) complex coacervates (CCWPI:AI) were formed at pH 3.0 using WPIT and WPIUS, and the associative electrostatic interactions between WPI-AI led to coacervation yields >90 %, influenced by the preconditioning process employed. Viscoelastic properties outlined a predominantly solid-like behavior (G´ > G"). The CCWPI:AI system based on WPIT showed enhanced strength and gel-like structure compared to the WPIUS-based system. Oil-in-water (O/W) emulgels were formed and stabilized with the CCWPI:AI complexes, exhibiting spherical droplets (93.3-292.8 µm), whereas texture and rheological properties highlighted the formation of gel-like systems. The centrifugation STEP technology was used to evaluate the physical stability of emulgels, WPIT-based emulgels displayed superior stability against creaming than untreated WPI and WPIUS-based emulgels. These findings provide a basis for developing emulgels with prolonged stability and tunable functional properties, tailoring enhanced viscoelastic and texture attributes to meet specific needs for industrial applications where gel-like properties are pursued.

Copaifera langsdorffii Oleoresin-Loaded Nanostructured Lipid Carrier Emulgel Improves Cutaneous Healing by Anti-Inflammatory and Re-Epithelialization Mechanisms.

The skin is essential to the integrity of the organism. The disruption of this organ promotes a wound, and the organism starts the healing to reconstruct the skin. Copaifera langsdorffii is a tree used in folk medicine to treat skin affections, with antioxidant and anti-inflammatory properties. In our study, the oleoresin of the plant was associated with nanostructured lipid carriers, aiming to evaluate the healing potential of this formulation and compare the treatment with reference drugs used in wound healing. Male Wistar rats were used to perform the excision wound model, with the macroscopic analysis of wound retraction. Skin samples were used in histological, immunohistochemical, and biochemical analyses. The results showed the wound retraction in the oleoresin-treated group, mediated by α-smooth muscle actin (α-SMA). Biochemical assays revealed the anti-inflammatory mechanism of the oleoresin-treated group, increasing interleukin-10 (IL-10) concentration and decreasing pro-inflammatory cytokines. Histopathological and immunohistochemical results showed the improvement of re-epithelialization and tissue remodeling in the Copaifera langsdorffii group, with an increase in laminin-γ2, a decrease in desmoglein-3 and an increase in collagen remodeling. These findings indicate the wound healing potential of nanostructured lipid carriers associated with Copaifera langsdorffii oleoresin in skin wounds, which can be helpful as a future alternative treatment for skin wounds.

Copaiba Oil-Based Emulsion as a Natural Chemotherapeutic Agent for the Treatment of Bovine Mastitis: In Vivo Studies.

Copaiba oil-resin (COR) extracted from Copaifera reticulata Ducke has been used as a natural chemotherapeutic agent for a wide range of therapeutic applications. This study presents an emulgel design with a high concentration of COR, designed to prevent and treat mastitis. The COR was stabilized in a gel matrix constituted by carbopol C934P and Pluronic® F127 (ECO formulation) ratios. The permeation study of ECO was accessed by Fourier transform infrared photoacoustic spectroscopy (FTIR-PAS). The results reveal a high capacity of ECO to permeate deep skin layers. Dairy cows with a history of mastitis were used as in vivo models and exposed to ECO treatment. Monitoring of the teat's inflammatory response showed that ECO effectively prevents mastitis. Furthermore, the ECO formulation was able to form a thin film gel on the application side, preventing fly proliferation and significantly reducing the pathogen load. This study reveals a drug that can used as an alternative application for mastitis in human or veterinary clinics.

Thermo and Photoresponsive Emulgel Loaded with Copaifera reticulata Ducke and Chlorophylls: Rheological, Mechanical, Photodynamic and Drug Delivery Properties in Human Skin.

Recently, the number of new cases of cutaneous leishmaniasis has been of concern among health agencies. Research that offers new therapeutic alternatives is advantageous, especially those that develop innovative drugs. Therefore, this paper presents the incorporation of Copaifera reticulata Ducke and chlorophyll extract into Pluronic®® F127 and Carbopol gels, under optimized polymer quantities. The chlorophyll extract (rich in photosensitizing compounds) was obtained by continuous-flow pressurized liquid extraction (PLE), a clean, environmentally friendly method. The system aims to act as as a leishmanicidal, cicatrizant, and antibiotic agent, with reinforcement of the photodynamic therapy (PDT) action. Rheological and mechanical analyses, permeation studies and bioadhesiveness analyses on human skin, and PDT-mediated activation of Staphylococcus aureus were performed. The emulgels showed gelation between 13° and 15 °C, besides pseudoplastic and viscoelastic properties. Furthermore, the systems showed transdermal potential, by releasing chlorophylls and C. reticulata Ducke into the deep layers of human skin, with good bioadhesive performance. The application of PDT reduced three logarithmic colony-forming units of S. aureus bacteria. The results support the potential of the natural drug for future clinical trials in treating wounds and cutaneous leishmania.

Design and Optimization of a Natural Medicine from Copaifera reticulata Ducke for Skin Wound Care.

In this study, we developed a bioadhesive emulsion-filled gel containing a high amount of Copaifera reticulata Ducke oil-resin as a veterinary or human clinical proposal. The phytotherapeutic system had easy preparation, low cost, satisfactory healing ability, and fly repellency, making it a cost-effective clinical strategy for wound care and myiasis prevention. Mechanical, rheological, morphological, and physical stability assessments were performed. The results highlight the crosslinked nature of the gelling agent, with three-dimensional channel networks stabilizing the Copaifera reticulata Ducke oil-resin (CrD-Ore). The emulgel presented antimicrobial activity, satisfactory adhesion, hardness, cohesiveness, and viscosity profiles, ensuring the easy spreading of the formulation. Considering dermatological application, the oscillatory responses showed a viscoelastic performance that ensures emulgel retention at the action site, reducing the dosage frequencies. In Vivo evaluations were performed using a case report to treat ulcerative skin wounds aggravated by myiasis in calves and heifers, which demonstrated healing, anti-inflammatory, and repellent performance for the emulsion-filled gel. The emulgel preparation, which is low in cost, shows promise as a drug for wound therapy.

Semisolid formulations based on solid-in-oil-in-water systems containing proteins

Abstract In recent years, improvements have been made, through biotechnological processes, in the production and development of peptides capable of increasing collagen and elastin synthesis for anti-aging skin care. However, proteins have many limitations due to their structural, chemical and physical fragility to external aggressions, which may cause conformational changes, leading to loss of biological activity. Therefore, it is important to create delivery systems that protect these biomolecules from damage, allowing them to reach their target. This work aimed to develop a system able to carry bovine serum albumin (BSA), used as a model of a protein, and to incorporate this system in a semisolid formulation suitable for skin application. A microemulgel based on a solid-in-oil-in-water (S/O/W) microemulsion was prepared. Firstly, the association efficiency (AE) of lyophilized BSA-sucrose ester complex and the size of S/O nanodispersion were assessed; then, the characterization and stability evaluation of the final semisolid formulation through evaluation of pH, texture and rheological behavior were performed. The average value of AE was 54.74% ± 2.17. It was possible to develop an S/O/W microemulsion, which allowed the subsequent development of an S/O/W microemulgel that assured suitable pH, texture and rheological characteristics for skin application.

The gelling properties of Dillenia indica mucilage in benzyl benzoate emulgel formulations

Abstract The objective of the study was to evaluate the gelling properties of Dillenia indica mucilage in benzyl benzoate emulgel formulation. Mucilage was extracted from the fruits of Dillenia indica using established methods and characterized by rheology and swelling. Emulsion (F1) was prepared using the continental emulsification method. Gelling agents (2 %w /v) were prepared by dispersing in distilled water with constant stirring at a moderate speed using a magnetic stirrer. F1 was added to the gel (0-75 %w /w) to obtain emulgel formulations and evaluated using viscosity, globule size, pH, release profiles and kinetic modeling. Data were expressed as mean ± SD, and similarity factor (f2) was used to compare all formulations. Formulation viscosity was significantly higher with carbopol than with Dillenia; globule sizes increased with concentration of gelling agents, and pH reduced as the concentration of Dillenia increased. All formulations showed controlled release properties with t80 ranging between 114 and 660 min. The release was governed by Korsmeyer-Peppas model. Formulation F5 prepared with 50 % Dillenia showed highest similarity to F4 prepared with 75 %w /w carbopol. Dillenia indica demonstrated acceptable gelling properties comparable with that of carbopol and could be improved for use in emulgel formulations.

Mucoadhesive emulgel systems containing curcumin for oral squamous cell carcinoma treatment: From pre-formulation to cytotoxicity in tissue-engineering oral mucosa.

Current oral squamous cell carcinoma chemotherapies demonstrate off-target toxicity, which could be reduced by local delivery. Curcumin acts via many cellular targets to give anti-cancer properties; however the bioavailability is hindered by its physicochemical characteristics. The incorporation of curcumin into emulgel systems could be a promising approach for its solubilization and delivery. The aim of this work was to develop emulgel systems containing curcumin for the treatment of oral cancer. The emulgels containing curcumin were prepared with poloxamer 407, acrylic acid derivatives, oil phase (sesame oil or isopropyl myristate). The more stable system was evaluated for mechanical and rheological properties, as well as, the in vitro drug release profile, permeation and cytotoxic potential to oral mucosa models. The flow-throw system evidenced that the formulations could keep 5 min over porcine oral mucosa. Emulgel showed pseudoplastic behavior and a gelation temperature of 33 °C, which ensure their higher consistency. In addition, 70% of the incorporated curcumin was released within 24 h in an in vitro drug release study and could permeate porcine oral mucosa. Monolayers cultures and tissue-engineered models showed the selectivity of the drug and systems for tumor cells. The physicochemical properties, subsequent release and permeation of curcumin to selectivity kill cancer cells could be improved by the incorporation into emulgel systems.

Formulation and Evaluation of a Novel Itraconazole-Clotrimazole Topical Emulgel for the Treatment of Sporotrichosis.

In recent years, the development of new pharmaceutical formulations for the treatment of sporotrichosis has become a relevant research field. In this work, we aimed to develop an emulgel containing itraconazole and clotrimazole to ensure therapeutic effectiveness against Sporothrix brasiliensis. The topical use of a formulation that combines both drugs represents an interesting option for the complementary treatment of sporotrichosis. The emulgel formulation was prepared and evaluated for its zeta potential, viscosity, in vitro antifungal activity and stability at different storage conditions. The results showed that the newly developed emulgel displayed promising physicochemical characteristics, as well as a good in vitro inhibitory activity against S. brasiliensis yeasts. The results obtained in this work suggest that the emulgel containing itraconazole and clotrimazole might highly be efficient and a complementary therapy to oral administration in the treatment of sporotrichosis.

Development of an emulgel for the treatment of rosacea using quality by design approach.

Objective: The aim of this study was to develop an emulgel for the treatment of rosacea, applying quality by design (QbD).Methods: An emulgel designed to release the active pharmaceutical ingredients (APIs), metronidazole and niacinamide, via an emollient formulation that favors residence time and attenuates facial redness would be an excellent vehicle to develop to treat rosacea. It was decided to design first a vehicle presenting the attributes established in the quality target product profile, and then, after selecting the best formulation, to load the APIs in it to optimize the final emulgel. A design of experiments was introduced to study the effect of formulation variables on quality attributes (adhesion, phase separation by mechanical stress and viscosity) of the emulgels. Response surface methodology and desirability functions were applied for data analysis. After optimization, the final emulgel was further characterized by assay and in vitro release of APIs, attenuation of facial redness, and compared to commercially available metronidazole products regarding API release.Results: The final emulgel gradually released both APIs, reaching approximately 88% within the first 4 h, and their profiles were well described by the Higuchi model. Only a light attenuation effect to conceal facial redness was achieved.Conclusions: A metronidazole and niacinamide emulgel, also providing cosmetic assistance, was developed using QbD. The emulgel releases metronidazole faster than the creams, but more gradually than the commercially available gel, providing a realistic time frame of drug delivery in accordance with the expected time of residence of the adhesive emulgel over the affected facial area.

Polymeric emulgel carrying Cinnamomum tamala extract: promising delivery system for potential topical applications

Currently, the use of natural compounds obtained from plants tremendously increased due to their promising therapeutic properties. The aim of this study was to formulate a stable emulgel formulation loaded with Cinnamomum tamala (CT) extract. The antioxidant activity of plant extract was determined by DPPH inhibition assay. The extract was successfully loaded into an emulgels using different concentrations of carbopol-940, liquid paraffin, emulsifying agents and preservatives. Preliminary stability study was performed of 17 CT emulgel formulations at accelerated temperature of 50 °C for 2-months. Organoleptic evaluation, centrifugation, globule size, pH, electrical conductivity and rheological studies were performed for a period of 90-days at different temperature including 8, 25, 40 and 40 °C ±75% RH. The CT extract showed promising antioxidant activity of about 81%. On the other hand, the CT loaded emulgel formulation displayed high physical stability at all tested conditions of temperature and time. However, slight decrease in pH and minimum increase in conductivity was observed at 40 and 40 °C±75% RH. The rheological examination of CT emulgel indicated the flow index values of all the samples kept at different temperatures were less than 1, demonstrated non-newtonian and pseudo-plastic nature of CT emulgel. Taken together, the CT emulgel formulation has been evinced to be an excellent addition in the field of topical formulations.

Amphotericin B-Loaded Emulgel: Effect of Chemical Enhancers on the Release Profile and Antileishmanial Activity In Vitro.

Cutaneous leishmaniasis is a neglected parasitic disease. Treatment is preferably performed with pentavalent antimony associated or not with amphotericin B (AmB). This study aimed to develop an emulgel with different chemical enhancers of cutaneous release. Initially, AmB emulsions were obtained with the chemical promoters, oleic acid and geraniol and without promoter, then for the evaluation of the formulations, a preliminary stability study was carried out where the formulations were submitted to centrifugation, before and after the freeze-thaw cycle and analyzed appearance, color, pH, spreadability, viscosity, conductivity, droplet size, assay, in vitro release study, in vitro antileishmania activity in Leishmania major promastigotes, and macrophage toxicity in the MTT test. The emulsions were yellowish, with no signs of instability after the centrifugation test. The pH range corresponded to that of the skin, which is 4.6 to 5.8, before and after the freeze-thaw cycle, the formulations had good spreadability and did not present significant viscosity differences before and after the freeze-thaw cycle, presenting a non-Newtonian characteristic. AmB content was within the kinetic model of zero order release, the formulation of 3% AmB and 5% oleic acid (formulation 1) was chosen to proceed with the antileishmania activity test and showed potential activity against the in vitro parasite with significant reduction of cytotoxicity on murine macrophages, indicating that the formulation is promising for the treatment of cutaneous leishmaniasis.