Immediate loading in partially edentulous patients with fixed implant-supported restorations cases report.

Objectives: This article reports on four rare cases involving multiple trauma-induced adjacent missing anterior teeth in the maxillary or mandibular region. These cases were successfully treated using a 4-axial implant-based alternative insert and an immediate loading protocol. Material and methods: This series of cases was summarized by retrospective study that 4 patients who received a total of 20 immediately loaded implants. These patients had suffered from trauma-induced loss of 8-9 adjacent anterior teeth. The 4-axial-implants were inserted with the assistance of digital pioneer drill guides. The surgical procedure involved alveolar bone trimming or ultrasonic osteotomy, eliminating the need for traditional large-area bone augmentation. Pre- and post-operative CBCT was matched using DTX Studio Implant software, the deviation of implant between actual position and preoperative design was measured and compared using SPSS software package. Results: The average follow-up duration 48 months after implant prostheses, the cumulative retention rate of the implants was 100%, the marginal bone loss averaged 0.53 mm (SD 0.15 mm), and buccal plate bone loss averaged 0.62 mm (SD 0.41 mm). Conclusions: This retrospective clinical report demonstrates the successful treatment of several patients with multiple adjacent maxillary or mandibular anterior teeth using four implant-supported screws to fix the frame and employing immediate loading. The approach resulted in long-term stable clinical outcomes. Moreover, the method not only shortens the period of edentulism but also facilitates easy disassembly, maintenance, and cleaning. Consequently, it emerges as a highly favorable clinical option for patients suffering from extensive tooth loss.

Volumetric Analysis of Peri-implant Tissue Change Over Time: Validating an Innovative 3D Method.

PURPOSE: To validate an innovative 3D volumetric method of evaluating tissue changes proposed by Lee et al in 2020 by comparing the results of this method-in which the scanned peri-implant surfaces were transformed, visualized, and analyzed as 3D objects-to the results reported by an existing method based on calculation of the mean distance between measured surfaces. The null hypothesis was that there was no statistically significant difference between the two methods. Additionally, the present study evaluated peri-implant tissue changes 5 years after single implant placement in the esthetic zone. MATERIALS AND METHODS: Both methods were applied to 11 oral implant site casts (6 maxillary central incisor sites, 5 maxillary lateral incisor sites) taken from 11 patients at crown placement and at follow-up examinations 5 years later. The methods are based on digital workflows in which the reference and 5-year casts are scanned and the resulting STL files are superimposed and analyzed for three regions of interest (mesial papilla, central area, and distal papilla). The volumetric changes reported by the Lee et al method and the mean distance method were calculated and compared using the Spearman rank correlation coefficient (P < .01) and the Wilcoxon signed-rank test (P < .05). RESULTS: The correlation between the two sets of measurements was very high (Spearman rank correlation coefficient = 0.885). The new volumetric method indicated a mean volume loss of 2.82 mm3 (SD: 5.06), while the method based on the measurement of mean distance showed a mean volume loss of 2.92 mm3 (SD: 4.43; Wilcoxon signed-rank test result: P = .77). No statistically significant difference was found. The two methods gave equivalent results, and the null hypothesis was accepted. CONCLUSIONS: The new volumetric method was validated and can be considered a trustworthy tool.

Dental implant placement with simultaneous localized ridge augmentation using L-shaped titanium mesh in the esthetic zone: a case report.

The aim of this case report is to illustrate a successful technique for dental implant placement in the esthetic zone using simultaneous localized ridge augmentation with L-shaped titanium mesh. A 35-year-old patient presented with a single missing tooth in the esthetic zone requiring dental implant placement. The treatment plan was made to place a dental implant in conjunction with a guided bone regeneration procedure using a prefabricated L-shaped titanium mesh. The procedure achieved successful reconstruction of the deficient ridge, providing ample volume and contour for implant placement. Implant osteointegration was achieved, resulting in a satisfactory functional and esthetically pleasing outcome. The use of L-shaped titanium mesh offers superior stability and biocompatibility, ensuring optimal support and containment of graft material. This case report highlights the feasibility and clinical effectiveness of dental implant placement with simultaneous localized ridge augmentation using L-shaped titanium mesh in the esthetic zone. Further studies are warranted to assess the long-term success and esthetic outcomes of this technique.

Hard and soft tissue alterations using dual-zone concept versus connective tissue graft at maxillary immediate implant placement: A 1-year randomized clinical and volumetric trial.

OBJECTIVES: To evaluate the esthetic outcome, as well as clinical, radiographic, and volumetric tissue alterations 1 year after immediate implant placement (IIP) with connective tissue grafting (CTG) versus dual-zone concept (DZ) at sites with thin labial bone in the esthetic zone. MATERIALS AND METHODS: This randomized clinical trial included 30 patients treated with IIP simultaneous with either CTG or DZ (n = 15 each). Pink esthetic score (PES) was assessed 6 months after crown placement as the primary outcome. Amount of bone labial to the implant, labio-palatal ridge reduction, and crestal bone changes were measured via CBCT after 1 year. Volumetric analysis of linear labial soft tissue contour, interdental, and mid-facial soft tissue level changes, and total volume loss (mm3) were measured after 1 year. RESULTS: Similar PES was observed in the CTG (12.53 ± 1.13) and DZ (12.13 ± 1.55) groups, with no significant difference (p = 0.42). Likewise, there were no statistically significant differences found between the two groups in labio-palatal bone reduction (mm&%), interdental papillae, and mid-facial gingival levels (p > 0.05). However, the mean vertical crestal bone changes in the CTG and DZ groups were -1.1 ± 0.6 mm and 0.2 ± 1.0 mm, respectively, with a statistically significant difference (p = 0.0002). Moreover, CTG revealed less linear and total volume (mm3) loss in the labial soft tissue which was statistically significant compared to DZ (p = 0.007). CONCLUSION: Both groups demonstrated the same PES, nevertheless, volumetric analysis revealed twice total labial volume loss in DZ compared to CTG. It might be concluded that the use of CTG with IIP caused less horizontal reduction in the supra-implant complex compared to the DZ.

Accuracy and patient-centered results of marker-based and marker-free registrations for dynamic computer-assisted implant surgery: A randomized controlled trial.

OBJECTIVES: To compare implant placement accuracy and patient-centered results between the dynamic computer-assisted implant surgeries (d-CAISs) using marker-based and marker-free registration methods. MATERIALS AND METHODS: A double-armed, single-blinded randomized controlled trial was conducted, in which 34 patients requiring single implant placement at the esthetic zone were randomly assigned to the marker-based (n = 17) or marker-free (n = 17) groups. The marker-based registration was performed using a splint containing radiopaque markers, while the marker-free registration used natural teeth. The primary outcome assessed implant positioning accuracy via angular and linear deviations between preoperative and postoperative implant positions in CBCT. Patients were also surveyed about the intraoperative experience and oral health impact profile (OHIP). RESULTS: The global linear deviations at the implant platform (0.82 ± 0.28 and 0.85 ± 0.41 mm) and apex (1.28 ± 0.34 and 0.85 (IQR: 0.64-1.50) mm) for the marker-based and marker-free groups respectively showed no significant difference. However, the angular deviation of the marker-free group (2.77 ± 0.92 ° ) was significantly lower than the marker-based group (4.28 ± 1.58 ° ). There was no significant difference in the mean postoperative OHIP scores between the two groups (p = .758), with scores of 2.74 ± 1.21 for marker-based and 2.93 ± 2.18 for marker-free groups, indicating mild oral health-related impairment in both. Notably, patients in the marker-free group showed significantly higher satisfaction (p = .031) with the treatment procedures. CONCLUSIONS: D-CAIS with a marker-free registration method for single implantation in the anterior maxilla has advantages in improving implant placement accuracy and patients' satisfaction, without generating a significant increase in clinical time and expenses.

Considerations for predictable outcomes in static computer- aided implant surgery in the esthetic zone.

OBJECTIVE: To provide technical and clinical recommendations for implementing a digital workflow in Static Computer-Aided Implant Surgery in the anterior maxilla. CLINICAL CONSIDERATIONS: An optimal 3D implant position is crucial for achieving satisfying results in implant rehabilitation in the esthetic area. Due to its complexity, implant placement in the esthetic zone should be executed with precision and predictability. Static Computer-Aided Implant Surgery requires thorough planning and detailed attention to every step of the digital workflow protocol. CONCLUSIONS: Implant positioning in the esthetic zone using Static Computer-Aided Implant Surgery is a technique-sensitive procedure that requires precise execution of each step. This approach ensures accurate prosthetically driven 3D implant placement and prevents potential errors that could lead to inaccurate positioning. CLINICAL SIGNIFICANCE: The proper implementation of Static Computer-Aided Implant Surgery may increase the level of agreement between the planned and definitive implant 3D positions in the esthetic zone, thus enhancing the esthetic outcomes of implant rehabilitation.

Application of socket-shield technique for immediate implant placement and provisionalization in esthetic zone: a case report and literature review / 口腔疾病防治

Objective@#To investigate the effect of the socket-shield technique (SST) concurrent with immediate implant placement and provisionalization (IIPP) in the aesthetic restoration of anterior teeth.@*Methods@#A case of maxillary anterior tooth stumps with a thin labial bone wall was treated with SST for preservation of labial soft and hard tissue fullness, combined with an immediate implant placement and immediate provisional crown for restoring the shape of the tooth and gingival molding@*Results@#Immediate implant placement and provisionalization restored the morphology and function of the affected tooth in the shortest possible time. The patient's labial soft and hard tissue contours in the affected tooth area were well preserved in the 18-month follow-up after the application of the SST, which presented a better aesthetic result. The literature review indicates that the indications for SST are unrestorable maxillary anterior teeth, whose dental, periodontal and periapical tissues are healthy and intact. In the esthetic zone, root shielding is effective in maintaining the soft and hard tissue contour on the labial side of the implant. However, there is no consensus on the technical details of SST, such as the ideal coronal height and thickness of the shield, and the management of the gap between the shield and the implant. Thus, more clinical studies and histologic evidence are needed to provide a reference for clinical decision-making. In addition, digital technology can improve the accuracy of implant placement and shield preparation.@*Conclusion@#The correct application of SST combined with IIPP in the esthetic zone can ensure esthetic results. However, more high-quality evidence-based medical evidence is needed for its long-term efficacy, and indications should be strictly controlled during clinical application.

Long-term evaluation of combined prosthetic-surgical approach and soft tissue augmentation in the esthetic zone.

Background: There is no standard protocol for immediate implant placement and subsequent loading in the smile zone. We aimed to evaluate the long-term outcomes of simultaneous implant placement, soft tissue grafting, and immediate prosthetic loading in the esthetic zone. Methods: Thirty-five implants were placed in the maxillary aesthetic zone. Twenty-two patients were evaluated using the Pink Esthetic Score (PES) and White Esthetic Score (WES). Also, the degree of peri-implant bone resorption and patient survey were applied for the esthetic and functional outcomes. Results: The esthetic and harmonizing outcomes were achieved according to the mean total PES/WES value (17.9±2.0). The mean overall PES was 8.5±1.66. The papilla level had the highest mean score (1.8±0.36). Furthermore, the combination of root convexity/color and soft tissue color and texture was one of the key values in evaluating the effectiveness of this method (the mean value was 1.5±0.5). The mesial and distal papillae were 1.6±0.5 and 1.8±0.4, respectively. None of the 35 implants reached below 6 points (which is considered an esthetically unsatisfactory result). The mean WES score was 9.5±0.57. The average degree of total peri-implant bone resorption was 1.05±0.3 mm after 12 months. According to the questionnaire, all the patients smiled without hesitation and were satisfied with the treatment (100%). Conclusion: This study showed that restoring one or more teeth in the smile zone using the concept of one-stage implant placement, soft tissue flap augmentation, and loading with provisional crowns was an esthetically successful and predictable method.

Single Immediate Implant Placement with Provisional Crown in the Esthetic Zone with 6 Years Follow-Up.

Background: Immediate implant placement (IIP) has become an attractive treatment for many patients. It reduces time and the number of appointments and protects soft and hard tissue, which, in many circumstances, leads to a better esthetic outcome. IIP with provisionalization (IIPP) may contribute to a more promising result due to the guidance of soft tissue and the preservation of the hard tissue. Indications for IIPP are quite strict, and cone beam computed tomography (CBCT) is a must for case selection. Objective: This case report will demonstrate how IIP with immediate provisionalization can result in a high esthetic outcome and no discomfort for the patient. Case presentation: A 50-year-old female presented for implant placement following the extraction of a superior central incisor due to a vertical fracture. IIPP has been used. Conclusion: IIPP can accomplish a stable esthetic result in the case of ideal three-dimensional implant positioning, a well-polished provisional restoration with an S-shaped buccal emergence profile, and by respecting the mesial and distal embrasure spaces for papilla maturity.

Autogenous bone ring augmentation around single tooth implantation in the esthetic zone: A retrospective case series study with 2-3 years of follow-up.

Background: /purpose: Bone ring technique (BRT) is an effective method to reconstruct alveolar bone defects with simultaneous implant placement. This study aimed to evaluate the efficacy of the BRT in single maxillary anterior tooth implantation and its esthetic outcomes over 2-3 years of follow-up. Materials and methods: Fifteen patients with single maxillary incisor loss received autogenous BRT with simultaneous implant placement. The vertical/horizontal bone gain, remaining vertical bone height (RVBH), remaining buccal bone width (RBBW), and vertical/horizontal bone resorption around implant over 2-3 years of follow-up were measured by using cone-beam computed tomography. Esthetic results including white esthetic score (WES), pink esthetic score (PES), and papilla index (PI) were evaluated by clinical recorded photographs. Results: All implants showed evidence of osseointegration, and the mean vertical and horizontal bone gain of 14 sites was 5.55 ± 0.87 mm and 4.73 ± 0.70 mm, respectively. During 2-3 years of follow-up, all mean values of RBBW were more than 2 mm. Main vertical bone loss appeared within 4 months after surgery and the RVBH value decreased as the follow-up duration continued. Maximum buccal bone thickness resorption mostly appeared in the middle level of the implant during the primary two follow-up periods (P < 0.05). Esthetic results showed that the mean WES/PES was higher than 17, and more than half cases demonstrated relatively high PI (3 points) throughout the follow-up. Conclusion: BRT could achieve excellent bone augmentation effect and can offer predictable esthetic outcomes for single tooth implant restoration in the esthetic zone.

Effect of three different grafting materials on immediate implant placement using vestibular socket therapy in class II extraction sockets in the maxillary esthetic zone: a randomized controlled clinical trial.

BACKGROUND: This study compared the effectiveness of three bone grafting materials used for treating class II fresh extraction sockets in the esthetic zone with immediate implant placement using Vestibular Socket Therapy (VST) to evaluate the pink esthetic score (PES), peri-implant mucosal levels (PML), and facial bone thickness (FBT). METHODS: Twenty-four surgical sites in the maxillary anterior region presented with type II socket defects received immediate implants and simultaneous bone grafting with either a collagen plug soaked in blood, demineralized bone matrix Grafton, or a particulate mixture of 2/3 autogenous bone chips and 1/3 deproteinized bovine bone mineral MinerOss X. The outcome measures were evaluated at 6 and 12 months. The study was registered on www. CLINICALTRIAL: gov (12/07/2021 - ID: NCT04957654). RESULTS: Twenty-two cases (91.6%) showed a total PES score of > 10, without a significant difference between all groups. The vertical height soft tissue changes showed significant improvement in the Collagen plug and Grafton groups at 6 and 12 months, while MinerOss X showed no significant difference at 6 and 12 months compared to baseline. Radiographically, FBT was 0.72 ± 0.20, 0.44 ± 0.12, and 0.95 ± 0.37 at baseline, which significantly increased to 1.61 ± 0.88, 1.48 ± 1.20 and 2.31 ± 0.86 at 12 months for all three groups, respectively. CONCLUSION: The use of a particulate bone graft mixture significantly increases the FBT compared to collagen plugs and DBM-Grafton when performing VST during immediate implant placement in compromised Class II extraction sockets.

Técnica del acceso apical con injerto simultáneo de tejido conectivo subepitelial para el tratamiento de una fenestración del tejido blando peri-implantario: descripción de la técnica y presentación de un caso clínico / Apical access technique with simultaneous grafting of subepithelial connective tissue for the treatment of peri-implant soft tissue fenestration: description of the technique and presentation of a clinical case

Cuando hablamos de defectos sobre implantes y tejidos blandos lo asociamos principalmente a dehiscencias del tejido blando. Generalmente estamos cada vez más acostumbrados a tratar este tipo de patologías. Sin embargo, en la practica clínica diaria encontramos otras preocupaciones estéticas sobre el tejido blando que requieren estudio y tratamiento. Desde este punto de vista, este informe de caso clínico tuvo como objetivo describir un abordaje quirúrgico mediante la técnica del acceso apical para el tratamiento de una fenestración estética sobre los tejidos blandos periimplantarios. La selección de la técnica bilaminar mediante un acceso apical con injerto de tejido conectivo simultaneo, parece ofrecer resultados prometedores para el tratamiento de deformidades del tejido blando periimplantario. (AU)

When we talk about implant and soft tissue defects we mainly associate them with soft tissue dehiscence. Generally, we are more and more accustomed to treating this type of pathology. However, in daily clinical practice we find other aesthetic concerns about soft tissue that require study and treatment. From this point of view, the aim of this clinical case report was to describe a surgical approach using the apical access technique for the treatment of an aesthetic fenestration on the peri-implant soft tissues. The selection of the bilaminar technique using an apical access with simultaneous connective tissue grafting seems to offer promising results for the treatment of peri-implant soft tissue deformities. (AU)

Dental implant treatment for two adjacent missing teeth in the esthetic region: A systematic review and 10-year results of a prospective comparative pilot study.

OBJECTIVES: The aim of the systematic review was to compare studies on implant-supported two-unit cantilever crowns with two adjacent implant-supported crowns in the anterior region. The second aim was to assess in a 10-year prospective comparative pilot study, hard and soft peri-implant tissue changes in patients with a missing central and adjacent lateral upper incisor, treated with either an implant-supported two-unit cantilever crown or two single implant-supported crowns. MATERIALS AND METHODS: Medline, Embase, and the Cochrane Central Register of Controlled Trials were searched (last search March 1, 2023). Inclusion criteria were studies reporting outcomes of two missing adjacent teeth in the esthetic region and treated with a single implant-supported two-unit cantilever fixed dental prosthesis, or with two solitary implant-supported crowns. Outcome measures assessed included implant survival (primary), changes in marginal bone and gingiva level, restoration survival, subjective and objective esthetic scores, papilla volume, mid-facial marginal mucosa level, probing depth, bleeding on probing, and biological and technical complications with ≥1-year follow-up. In addition, in a 10-year pilot study, the same outcome measures were assessed of five patients with a single implant-supported two-unit cantilever crown and compared with five patients with two adjacent single implant-supported crowns in the esthetic zone. RESULTS: Nine articles with 11 study groups were found eligible for data extraction. Meta-analyses of implant survival rates were 96.9% (mean follow-up 3.4 ± 1.4 years) for the implant-cantilever treatment and 97.6% (mean follow-up 3.0 ± 1.8 years) for the adjacent implants treatment (p = .79). In the 10-year comparative pilot study, no clinically relevant changes in hard and soft peri-implant tissue levels occurred in both groups. Patient satisfaction was also high in both groups. CONCLUSION: Single implant-supported two-unit crowns can be a viable alternative to the placement of two adjacent single implant crowns in the esthetic zone.

CAD/CAM Abutments in the Esthetic Zone: A Systematic Review and Meta-Analysis of Soft Tissue Stability.

Computer-aided design and computer-aided manufacturing customized abutments are increasingly used in everyday clinical practice. Nevertheless, solid scientific evidence is currently lacking regarding their potential advantages in terms of soft tissue stability. The main aim of this systematic review and meta-analysis was to compare the soft tissue outcomes of prefabricated versus customized (CAD/CAM) abutments. The present review was registered with PROSPERO (CRD42020161875) and the protocol was developed according to the PRISMA statement. An electronic search was performed on three databases (PubMed, Embase and Cochrane Central) up to May 2023. Data extraction was followed by qualitative and quantitative analysis of the included studies. Three randomized controlled clinical trials and three controlled clinical trials (number of patients = 230; number of dental implants = 230) with a follow-up of between 12 and 36 months were included. No significant differences were observed between prefabricated versus customized (CAD/CAM) abutments regarding midfacial mucosal recession, interproximal papillae and pink aesthetic score (PES) after 12 months. Conclusion: The potential benefits of CAD/CAM abutments on soft tissues should be better clarified in future investigations. The usage of customized CAD/CAM abutments in everyday clinical practice should be based on a careful case-by-case evaluation (CRD42020161875).

Orthodontic pretreatment with aligners for optimizing the result prior to fixed restorations in the esthetic zone.

OBJECTIVE: To show the benefit of a minor orthodontic pretreatment prior to fixed restorations in the esthetic zone in challenging situations. OVERVIEW: Esthetic rehabilitations in complex situations need careful treatment planning and comprehensive interdisciplinary approach. Minor orthodontic pretreatments may transfer complex situations into straight forward situations. Typical indications are space opening in order to provide space for a restoration with anatomic proportion or corrections of the tooth axis. CONCLUSION: This article presents three clinical cases that show how decision making can be facilitated by a functional and esthetic wax-up/mock-up workflow and how orthodontic pretreatment can contribute to a more functional, less invasive, and more esthetic outcome of restorative treatments in the esthetic zone. CLINICAL SIGNIFICANCE: Some complex cases in restorative dentistry can be transformed to straight forward cases with the help of minor orthodontic tooth movements.

In vitro and in vivo evaluation of a modified porcine acellular dermal matrix for soft tissue augmentation.

OBJECTIVES: To evaluate the effects of a modified porcine acellular dermal matrix (P-ADM), subepithelial connective tissue graft (SCTG) and other commercial bovine acellular dermal matrix membrane materials (B-ADM) on gingival soft tissue augmentation in the oral esthetic zone. MATERIAL AND METHODS: The characteristics of P-ADM were observed by scanning electron microscope (SEM), Hematoxylin and eosin (H&E) and Masson's trichrome staining (Masson staining). The biocompatibility of P-ADM was verified by CCK8, phalloidin and living/dead cell staining. Beagle dog models were constructed and the thickness of gingiva was analyzed by the intraoral scanner. The morphology was observed by H&E and Masson staining. RESULTS: Scanning electron microscopy, H&E and Masson staining showed that the P-ADM was mainly composed of collagen fibers, with no component of nuclear. The results of CCK8, phalloidin and living/dead cell staining indicated that the P-ADM had good cytocompatibility and no cytotoxicity. Human gingival fibroblasts were able to adhere and stretch on the surface of the material with pseudopodia. The SCTG group outperformed the B-ADM and P-ADM groups in terms of effectiveness, according to the analysis of digital oral scanning data at various time points following incremental soft tissue surgery. Compared with the B-ADM group, the effect of soft tissue increment was better in the P-ADM group. CONCLUSIONS: P-ADM, as a biocompatible biomaterial, can be used as an alternative biomaterial for oral soft tissue thickening. However, the results of this study need to be verified by more clinical trials.

Soft tissue esthetics around immediately provisionalized delayed implants with and without connective tissue graft: A randomized clinical trial pilot study.

OBJECTIVE: Evaluate the peri-implant soft tissue esthetics following a single, immediately provisionalized, delayed implant with/-out subepithelial connective tissue graft (SCTG). MATERIAL AND METHODS: The eligible patients were randomized into two groups. Immediate provisionalization was performed with (test group: SCTGG) or without SCTG (control group: NGG). The soft tissue esthetics was assessed by Pink Esthetic Score (PES) and Mucosal Scarring Index (MSI), at 6 and 12 months, following final implant restoration. RESULTS: The SCTGG, compared to NGG, yielded a 0.2 increased PES at 12 months (95% confidence interval (CI): -1, 1.4) and a 0.2 decreased MSI score (95% CI -0.9, 0.5) with no statistically significant differences in PES and MSI between both groups (p > 0.05). CONCLUSION: Soft tissue grafting around immediately provisionalized delayed implants could exhibit comparable results to immediate provisionalization alone in terms of peri-implant soft tissue esthetics using PES and MSI (ClinicalTrials.gov Identifier: NCT03770975).

Clinical study of dynamic real-time navigation assisted immediate implant without flapping in the esthetic zone.

OBJECTIVE: The purpose of this study is to investigate the clinical effect of Dynamic real-time navigation to assist immediate implant without flapping in the esthetic zone. METHODS: Eight patients who underwent immediate implantation in the aesthetic area were included. A total of 11 implants were implanted using dynamic real-time navigation system combined with non-flap technology. Clinical indicators including implant deviation, initial stability, alveolar bone absorption, implant success rate, pink esthetic score (PES), Papilla index score (PIS), and the thickness of labial side bone plate of the implant were recorded. RESULTS: The deviation between the actual implant position and the preoperative design was (0.76±0.08) mm at the top, (1.11±0.18) mm at the root, (0.90±0.16) mm at the depth, and (1.48±0.91)°at the Angle. ISO values of all implants were greater than 59. PES was greater than 8. PIS index was 2 or 3. The average alveolar bone absorption was (0.34±0.09) mm and the thickness of bone plate on the lip of implant was greater than 1.6 mm. The success rate of implantation was 100%. CONCLUSION: The use of dynamic real-time navigation assisted non-flap implantation in the aesthetic area can effectively reduce implant deviation and improve the aesthetic effect.

Application of soft tissue augmentation in labial contour aesthetics of anterior dental implants / 口腔疾病防治

@#After tooth extraction, labial contour collapses due to inevitable physiologic bone remodeling. To achieve optimal outcomes for pink esthetic treatment at anterior implant sites, bone or soft tissue augmentation has been advocated to maintain or reconstruct the labial tissue contour. When choosing soft tissue augmentation for esthetic restoration, it is necessary to strictly grasp the indications for surgery. Soft tissue augmentation to maintain or reconstruct the labial tissue contour could be considered in patients with healthy soft tissue and no bone defects or only mild horizontal bone defects. In immediate, early and late implant placement, the timing of soft tissue augmentation may vary. In immediate implantation, the labial bone plate is intact, so it is highly recommended to simultaneously manage soft tissue during implant placement. However, patients may have large bone defects with early or late implant placement. The risk of augmenting bone and soft tissue simultaneously is likely too high, and bone augmentation surgery is often performed at the first stage while soft tissue augmentation surgery is performed at the second stage. Therefore, soft tissue surgery is often carried out simultaneously with abutment connection. Currently, soft tissue augmentation is achieved mostly with adjacent autologous soft tissue grafts, such as free gingival grafts, subepithelial connective tissue grafts or pedicle palatal flaps, which are often accompanied by a second surgical area. The replacement of autogenous soft tissue grafting with new biological materials will become an inevitable trend. In this article, we analyze and summarize the indications, timing and different methods of soft tissue augmentation to maintain and reconstruct the labial contour.

Bucco-palatal implant position and its impact on soft tissue level in the maxillary esthetic zone.

AIM: The term "buccal implant position" is commonly used but lacks a precise definition and missing a reference point. Considering its major impact on peri-implantitis and esthetic failures the purpose of this study was to find a correlation between bucco-palatal implant positioning and the midfacial soft tissue level of implant crowns using newly defined Emergence-points. MATERIALS AND METHODS: Patients with unilateral single-tooth implant crowns in the region of the central or lateral maxillary incisor were included in this study. Digital intraoral scans were superimposed over a scan of the master cast or the original digital data set and analyzed in a computer planning program. In relation to the corresponding natural tooth, an ideal Emergence-point (EIDEAL -point) was defined from a frontal view. The distance to the real Emergence-point (EREAL -point) of the implant crown was correlated to apical displacement (AD) of peri-implant soft tissue. The distance of the implant shoulder (I-point) to the real Emergence-point (EREAL -point) of the implant crown was also correlated to the AD of peri-implant soft tissue. In cross sections, the horizontal distance between EREAL - and I-point represents the sagittal implant position (SIP), and the vertical distance represents the vertical implant position (VIP). RESULTS: Seventy-three patients met the inclusion criteria. AD ranged from 0 to 3.5 mm (AD = 0.87 ± 1.01), SIP from 0.2 to 5.1 mm (AD = 2.66 ± 1.64). Statistical analysis showed a significant inverse correlation between AD and SIP (ρ = -.55, p < .001). VIP, the implant inclination, time span since implant insertion, and phenotype revealed no significant correlation to AD. CONCLUSION: The more palatal the implant was positioned, the less AD was observed. The position of the implant shoulder should preferably be planned more than 2 mm behind the ideal E-point. This E-point can be used for implant planning as it defines the ideal crown length for prospective planning.