Development of a reusable polymeric fluorescence sensor based on acryloyl ß-cyclodextrin for the determination of aflatoxin B1 in grain products.

AFB1 is a harmful substance that can be found in agricultural products and can seriously affect human health, even in trace amounts. Therefore, monitoring AFB1 levels to ensure food safety and protect public health is crucial. New, highly reliable, selective, and rapid detection methods are needed to achieve this goal. Our work involves the development of a polymeric membrane sensor using radical polymerization that can accurately detect AFB1. Various spectroscopic techniques (Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM)) were used to obtain information about the structural and morphological properties of the prepared sensor. The sensor displayed fluorescence selectively responsive to AFB1 at the excitation wavelength of 376 nm and emission wavelength of 423 nm. The polymeric fluorescence sensor showed good sensitivity and a wide linear range from 9.61 × 10-10 and 9.61 × 10-9 mol/L for AFB1quantification. The limit of detection (LOD) is as low as 3.84 × 10-10 mol/L for AFB1. Other mycotoxins, such as aflatoxin B2 and aflatoxin G1, did not interfere with the sensor's high selectivity towards AFB1. To test the sensor's effectiveness in detecting AFB1 in real samples, three different grain samples - peanuts, hazelnut butter, and peanuts with a sauce known to contain AFB1 - were utilized. The results were satisfactory and demonstrated that the sensor can be successfully employed in real samples, with an error range of 0.43 % to 12.10 %.

Advanced AIE Materials for Environmental Monitoring: Selective Sensing of Thorium(IV) in Aquatic Systems.

Thorium (Th) is commonly used in various applications, but its long-term exposure poses health risks, necessitating its detection in aqueous environments. Traditional methods such as inductively coupled plasma mass spectrometry are sensitive but require complex instrumentation. Optical sensors, particularly fluorometry-based methods, are simpler, cost-effective, and selective. However, developing effective aggregation-induced emission (AIE) turn-on sensors for Th(IV) requires water-soluble fluorophores with a low background fluorescence. In the present work, we report a turn-on detection method for Th(IV) based on the AIE of the fluorophore tetra(4-sulfophenyl) ethylene (SuTPE). Th(IV)-induced aggregation of SuTPE and the simultaneous drastic enhancement of the emission property of SuTPE have been utilized for the selective sensing of Th(IV) in 100% aqueous media. The sensing mechanism was explored using ground-state absorption, steady-state and time-resolved emission, FTIR, DLS, SEM, AFM and quantum chemical studies of the SuTPE-Th(IV) complex. The selectivity of the present probe toward Th(IV) ions has been established by studying the interference of several metal ions, including lanthanides and uranyl ions. The LOD for Th(IV) was estimated to be 240 nM (56 ppb). The performance of the probe was demonstrated in tap water and diluted seawater matrixes. This work provides a significant advance for Th(IV) detection in aqueous environments, with implications for environmental monitoring and health safety.

A highly selective and recyclable fluorescent sensor based on a Salamo-Salen-Salamo type ligand for continuous detection of Al3+ and phosphates in drug.

In this work, a fluorescence chemical sensor continuous detection Al3+ and phosphates by a Salamo-Salen-Salamo type compound (SL) was employed. The sensor continuously recognized Al3+ and phosphates with good selectivity and fast response time, and a low limit of detection of 0.25 µΜ and 0.96 µM, at the same time accompanied by a naked-eye identification specificity. The detection mechanism of SL towards Al3+ is due to the chelating fluorescence enhancement effect and ICT effect, and continuously towards phosphates is due to the collapse of the SL-Al3+ and coordination interaction between Al3+ and phosphates, by Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, other spectral characterization and DFT calculation as evidence. In addition, the sensor had good recyclability and reusability. The distribution of Al3+ and phosphates in zebrafish cells was effectively monitored by confocal microscopy based on the good biocompatibility and tissue permeability of SL. Furthermore, the feasibility of using sensor SL to detect the content of Al3+ and phosphate ions in certain drugs was quantitatively analyzed through experiments. It was found SL had a good result in practical application.

A purine fluorescent derived probe assay for glyphosate and mesotrione via Schiff base cleavage.

A fluorescent probe derived from purine with Schiff base moiety was developed for the recognization of glyphosate and mesotrione. The detected glyphosate and mesotrione can lead to the dissociation of the Schiff base probe to enhance the fluorescence via a turn-off PET process. Mechanism study revealed that the synergistic effect of the phosphoric acid and the secondary amine moieties in glyphosate results in the bond cleavage of the Schiff base probe. Quantitative measurements of glyphosate and mesotrione were achieved with the detection limits of 17.2 nM and 484.32 nM, respectively. Meanwhile, the detection of glyphosate pesticide in real samples and cells was also conducted, demonstrating the good practicality and cytocompatibility of the probe.

Fabrication, spectroscopic and photofunctional studies of layered lutetium-dysprosium hydroxides.

The spectroscopic studies of layered rare-earth hydroxides (LRHs) have aroused great interests owing to the unique features of combing rare-earth ions with diverse anions. In this work, some anions were incorporated into layered lutetium-dysprosium hydroxides (LLuH:Dy) by the hydrothermal and ion exchange process, in which Dy3+ ion acted as the emission center. The results manifest that the assemblies possess clearly lamellar structure and flake shape, and emit the characteristic yellow and blue light of Dy3+ under ultraviolet excitation. The inorganic WO42- intercalated LLuH:Dy shows enhanced luminescence under the excitation with 280 nm which originates from the O-W charge transfer band. The more fantastic is that the assembly produces bright cyan light due to the appropriate yellow/blue light intensity ratio, and can transform into transparent and flexible film by mixing with certain polymer. Moreover, the intercalation of organic chromophore benzenetetracarboxylic anion into LLuH:Dy also greatly promotes the Dy3+ luminescence, and can easily form the nanosheet colloid through combining with surfactant dodecyl sulfonate. The colloid is very stable at ambient temperature and displays excellent selectivity, sensitivity and accuracy for detecting metal Co2+ in aqueous media, constructing a superior fluorescence sensor for Co2+ with a detection limit of 2.65 × 10-7 mol/L. This work expands the photofunctional performances of LRHs in the form of transparent film and colloidal state.

High-performance ratiometric fluorescence detection and removal of tetracycline in milk based on CDs@ZSM-5:Eu3.

Exploring materials with the dual functionality of detecting and removing tetracycline (TC) residues is crucial because of the environmental and health risks posed by antibiotic overuse. This study introduces a dual-emissive luminescent probe, CDs@ZSM-5:Eu3+, created through a solvent-free method combined with subsequent Eu3+ion exchange. The nanocomposite's blue emission, originating from carbon dots (CDs), is quenched by TC via an internal filtering effect, while an antenna effect triggers a strong red fluorescence of a TC-Eu3+chelate. The ratiometric fluorescence changes in CDs@ZSM-5:Eu3+ endow a self-calibrated sensing mechanism for TC, offering a low detection limit of 5.04 nM and a broad detection range of 0.01-50 µM. Demonstrated in real milk samples, the probe exhibits high selectivity and accuracy in detecting TC. The nanocomposite also displayed an impressive TC removal capacity of 238.1 mg g-1 in water, ascribing to the enrichment and electrostatic attraction effects of ZSM-5 toward TC molecules. This research offers a facile strategy for constructing multifunctional zeolite-based hybrids for simultaneous TC detection and removal from aqueous solutions.

A "turn-on" fluorescence sensor for hydroquinone detection based on BSA doped carbon dots (BSA@CDs) from crawfish shells.

By using crawfish shells as the precursor and hydrothermal synthesis, Bovine serum albumin doped carbon dots (BSA@CDs) were prepared without excessive chemical reagents. The relationship between the fluorescence properties of different BSA@CDs and BSA amount was investigated by variouscharacterization techniques. When the amount of BSA added was 30 %, the prepared BSA@CDs' quantum yield (QY) reached 25.01 %, which was the highest. Inner Filter Effect (IFE) suggested that Cr (VI) can selectively quench the fluorescence of BSA@CDs. Cr (VI) can be reduced to Cr (III) by Hydroquinone (HQ), thus recovering the fluorescence. Accordingly, using BSA@CDs as a probe, a "turn-on" fluorescence sensor applied in HQ determination was constructed. The linear range was 10-200 µmol/L and limit of detection (LOD) was 0.18 µmol/L. Further, it has been employed to the determination of HQ in both crawfish tail meat and aquaculture water with good performance.

A Smartphone-Integrated Ratiometric Fluorescence Sensor for the Ultrasensitive and Selective Detection of 5-Heneicosylresorcinol in Whole Wheat Foods.

Precise on-site monitoring of alkylresorcinols, a vital biomarker, is crucial for verifying whole wheat foods and accurately quantifying the whole wheat content in various consumer and industrial products. Herein, for the first time, we introduce a novel ratiometric fluorescence sensor (CDs@ZIF-8/CdTe@MIP) for ultrasensitive and selective detection of alkylresorcinols. 5-Heneicosylresorcinol (C21:0 AR), the primary alkylresorcinol homologue in whole wheat grains, was selected as the target analyte. This analyte was specifically and selectively recognized by the incorporation of a molecularly imprinted polymer (MIP) layer. Within this nanoreactor, blue-emitting carbon dots embedded in zeolitic imidazolate framework-8 (CDs@ZIF-8) and orange-emitting CdTe quantum dots served as the self-calibration signal and response signal, respectively. Exploiting a photoinduced electron transfer effect between CdTe and C21:0 AR, the established fluorescence sensor exhibited remarkable sensing performance, offering wide linear responses in 0.005-1 µg·mL-1 and 1-80 µg·mL-1 concentration ranges, and achieving a low detection limit of 1.14 ng·mL-1. The proposed assay effectively detected C21:0 AR in real samples, including 8 whole wheat foods and 19 whole wheat grains, demonstrating good recoveries and relative standard deviation. Furthermore, an intelligent sensing platform was established by integrating CDs@ZIF-8/CdTe@MIP with a smartphone-assisted device, thus validating the feasibility of visual and on-site monitoring of C21:0 AR. Because of its rapid response, portability, cost-effectiveness, superior sensitivity, and high selectivity, the proposed sensor serves as a reliable method for the analysis of C21:0 AR, thus having substantial potential for on-site monitoring of whole wheat foods.

Unlocking multi-mode sensing potential: Phosphorus-doped graphitic carbon nitride quantum dots for Ag+, ciprofloxacin, and riboflavin analysis in environment and food matrices.

The simultaneous detection of multiple analytes through a single fluorescence sensor is highly attractive. In this study, phosphorus-doped graphitic carbon nitride quantum dots (P-CNQDs) were developed, achieving multi-mode sensing through three distinct response mechanisms. The preparation involved using melamine as the carbon and nitrogen source and ammonium dihydrogen phosphate as the phosphorus source. Uniform and narrowly distributed P-CNQDs were successfully synthesized through chemical oxidation and hydrothermal methods, with an average size of 2.4 nm. These unique P-CNQDs exhibited fluorescence quenching through photo-induced electron transfer (PET) in response to Ag+. Additionally, the formation of hydrogen bonds and coordination interactions between P-CNQDs-Ag+ and ciprofloxacin (CIP) led to a pronounced fluorescence response to CIP by the chelation enhanced fluorescence (CHEF) mechanism. Furthermore, leveraging the principle of fluorescence resonance energy transfer (FRET), P-CNQDs-CIP served as a ratio fluorescence sensor for riboflavin (RF), enabling ultra-sensitive detection of RF. The combination of PET, CHEF, and FRET response mechanisms successfully facilitated multi-mode sensing for Ag+, CIP, and RF. The detection ranges were 0.05-100 µM, 0.002-2 µM, and 0.05-60 µM, with corresponding lowest detection limits of 17.1 nM, 1.1 nM, and 29.2 nM, respectively. This versatile sensor has been effectively applied to real samples, including the detection of river water and vitamin B2 tablets.

Controllable Preparation of a Cu NCs@Zn-MOF Hybrid with Dual Emission Induced by an Ion Exchange Strategy for the Detection of Explosives.

The precise synthesis of Cu NCs is a highly desirable and controllable route for the preparation of desired structures and properties, which facilitates the rational design of valuable probes for fluorescence sensing and the understanding of structure-property relationships. Herein, an ion-exchange strategy combined with a bottom-up synthetic approach was utilized in the synthesis process of Cu NCs for the first time, which achieved the controllable synthesis of Cu NCs and in situ anchoring of Cu NCs on the support material HPU-14. The as-prepared Cu NCs@HPU-14-4h not only had a good peroxidase-like property but also exhibited stable dual-emitting fluorescence at 470 and 620 nm. Notably, the peroxidase-like property endowed Cu NCs@HPU-14-4h with the capability of highly sensitive colorimetric detection of H2O2 in a linear concentration from 0.1 to 140 µM (detection limit of 86.7 nM), and a change in the fluorescent color from red to blue could be observed by the naked eye. Furthermore, due to the large overlap between the absorption of 2,4,6-trinitrophenol (TNP) and the excitation band of Cu NCs@HPU-14-4h, TNP could also be detected from 27 types of analogs and common ions with a limit of detection of 68 nM. Finally, a portable hydrogel probe with efficient wipe sampling was fabricated by polyvinyl alcohol (PVA) comprising Cu NCs@HPU-14-4h with the aim of on-site visualization of different explosives. Consequently, the current study not only provides a new idea for the precise synthesis of Cu NCs and their controllable anchoring on support materials but also offers an effective method for predicting H2O2 and TNP.

Enzyme-aided amplification strategy for sensitive detection of methamphetamine based on fluorescence aptamer sensor.

Methamphetamine (METH) abuse poses a serious risk to human health and social stability. It is critical to develop sensitive and selective methods for detecting METH. Here, we develop a fluorescence aptamer sensor to detect METH based on DNA exonuclease III (Exo III), graphene oxide (GO), and FAM-labeled aptamer. First, the sensor used GO's strong binding capacity to adsorb and quench the fluorescence of the aptamer attached to GO surface. When METH was added to the system, the formation of stable complex for aptamer and METH dissociated from the surface of GO, leading to a fluorescence restoration. Then, the fluorescence signal was further amplified by using Exo III to liberate target METH for cyclic hybridization. And the gel electrophoresis experiment further verified the reliability of this strategy. This aptamer sensor exhibited a low detection limit (0.52 nM) and excellent selectivity under optimal conditions. Notably, this sensor has been successfully validated in the detection of METH in urine and saliva samples, exhibited commendable recovery (94.00-104.65%). Its benefits include facile, sensitive, and rapid. Expected to be used in practical METH detection.

Rapid and efficient dual detection of Zn2+ ions and oxytetracycline hydrochloride using a responsive fluorescent "on-off" sensor based on simple salen-type Schiff base ligand.

This research has progressed a effective dual detection chemosensor of zinc ion and oxytetracycline hydrochloride antibiotic based on fluorescence technique. A straightforward method utilizing microwave irradiation was employed to synthesize the salen-type Schiff base ligand N,N'-bis(salicylaldehyde)4,5-dichloro-1,2-phenylenediamine (H2I), providing a good 70% yield. In ethanol, the H2I sensor demonstrated remarkable rapidity, selectivity, and sensitivity in detecting zinc ions. The fluorescence spectrum exhibited a 44-fold substantial enhancement at 522 nm and achieved a low limit of detection (LOD) of 1.47 µM. The ability to recognize zinc ions in different real water samples demonstrated from 98.67% to 103.31% in recovery. Interestingly, a naked-eye visible fluorescence color of H2I solution impregnated filter papers turned colorless into yellow under UV irradiation by adding Zn2+ ion, renders it suitable for developing a practical zinc ion detection kit test. In particular, the I-Zn2+ complex effectively quenched the fluorescence toward oxytetracycline hydrochloride (OTC) with a LOD value of 1.49×10-2 µM in DMSO: H2O (6:4, v/v). This is a novel and effective procedure in sensing OTC antibiotic by the I-Zn2+ complex. These findings hold immense potential for the development of dual fluorescent probes, thereby enhancing sensitivity and specificity in identifying metal ions and antibiotics in wide range of applications.

Alfalfa biomass as a green source for the synthesis of N,S-CDs via microwave treatment. Application as a nano sensor for nifuroxazide in formulations and gastric juice.

BACKGROUND: Researchers have investigated different techniques for synthesis of carbon dots. These techniques include Arc discharge, laser ablation, oxidation, water/solvothermal, and chemical vapor deposition. However, these techniques suffer from some limitations like the utilization of gaseous charged particles, high current, high temperature, potent oxidizing agents, non-environmentally friendly carbon sources, and the generation of uneven particle size. Therefore, there was a significant demand for the adoption of a new technology that combines the environmentally friendly aspects of both bio-based carbon sourcing and synthesis technique. RESULTS: Medicago sativa L (alfalfa)-derived N, S-CDs have been successfully synthesized via microwave irradiation. The N,S-CDs exhibit strong fluorescence (λex/em of 320/420 nm) with fluorescence quantum yield of 2.2 % and high-water solubility. The produced N,S-CDs were characterized using TEM, EDX, Zeta potential analysis, IR, UV-Visible, and fluorescence spectroscopy. The average diameter of the produced N, S-CDs was 4.01 ± 1.2 nm, and the Zeta potential was -24.5 ± 6.63 mv. The stability of the produced nano sensors was also confirmed over wide pH range, long time, and in presence of different ions. The synthesized N, S-CDs were employed to quantify the antibacterial drug, nifuroxazide (NFZ), by fluorescence quenching via inner filter effect mechanism. The method was linear with NFZ concentration ranging from 1.0 to 30.0 µM. LOD and LOQ were 0.16 and 0.49 µM, respectively. The method was applied to quantify NFZ in simulated gastric juice (SGJ) with % recovery 99.59 ± 1.4 in addition to pharmaceutical dosage forms with % recovery 98.75 ± 0.61 for Antinal Capsules® and 100.63 ± 1.54 for Antinal suspension®. The Method validation was performed in compliance with the criteria outlined by ICH. SIGNIFICANCE AND NOVELTY: The suggested approach primarily centers on the first-time use of alfalfa, an ecologically sustainable source of dopped-CDs, and a cost-effective synthesis technique via microwave irradiation, which is characterized by low energy consumption, minimized reaction time, and the ability to control the size of the produced CDs. This is in line with the growing global recognition of the implementation of green analytical chemistry principles.

Ratiometric fluorescence and smartphone-assisted sensing platform based on dual-emission carbon dots for brilliant blue detection.

In this study, an innovative ratiometric fluorescence and smartphone-assisted visual sensing platform based on blue-yellow dual-emission carbon dots (BY-CDs) was constructed for the first time to determine brilliant blue. The BY-CDs was synthesized via a facile one-step hydrothermal process involving propyl gallate and o-phenylenediamine. The synthesized BY-CDs exhibit favorable water solubility and exceptional fluorescence stability. Under excitation at 370 nm, BY-CDs show two distinguishable fluorescence emission bands (458 and 558 nm). Upon addition of brilliant blue, the fluorescence intensity at 558 nm exhibited a significant quenching effect attributed to fluorescence resonance energy transfer (FRET), while the fluorescence intensity at 458 nm was basically unchanged. The prepared BY-CDs can effectively serve as a ratiometric nanosensor for determining brilliant blue with the ratio of fluorescence intensities at 458 and 558 nm (F458/F558) as response signal. In addition, the developed ratiometric fluorescence sensor exhibits a noticeable alteration in color from yellow to green under UV light with a wavelength of 365 nm upon addition of varying concentrations of brilliant blue, which provides the possibility of visual detection of brilliant blue by a smartphone application. Finally, the BY-CDs based dual-mode sensing platform successfully detected brilliant blue in actual food samples and achieved a desirable recovery rate. This study highlights the merits of fast, convenient, economical, real-time, visual, high accuracy, excellent precision, good selectivity and high sensitivity for brilliant blue detection, and paves new paths for the monitoring of brilliant blue in real samples.

A quenched fluorescence sensor array based on bis-lanthanide metal-organic framework for acetaldehyde detection and Baijiu discrimination.

Discrimination of segmented Baijiu contributes to stabilizing the quality of products, improving revenue-generating effects. A fluorescence sensor array is constructed based on four fluorescence characteristic peaks of terbium@lanthanum metal-organic framework (Tb@La-MOF). Its fluorescence signal is specifically quenched, when Tb@La-MOF encounters acetaldehyde. Acetaldehyde may inhibit the absorption of energy by the organic ligands in MOF, or/and hydrogen bonding with -COOH on the organic ligand, resulting in energy transfer to Tb(Ⅲ). According to this, the quantitative detection of acetaldehyde is completed with a range of 10-300 µM and the detection limit of 5.5 µM. At the same time, it has been successfully applied to the discrimination of segmented Baijiu. Fifteen segmented from three wine cellars are 100 % discriminated with the combined processing of sensor arrays and analytical methods. Accuracy, simplicity, and low-cost are highlights of this fluorescence sensor array, which has considerable potential for application in detection, production, and food field.

Highly selective Zn2+ near-infrared fluorescent probe and its application in biological imaging.

Zn2+ plays a vital role in regulating various life processes, such as gene expression, cell signaling, and brain function. In this study, a near-infrared fluorescent probe AXS was synthesized to detect Zn2+ with good fluorescence specificity, high selectivity, and high sensitivity; the detection limit of Zn2+ was 6.924 × 10-11 M. The mechanism of Zn2+ recognition by the AXS probe was investigated by 1H nuclear magnetic resonance titrations, UV-visible spectroscopy, fluorescence spectroscopy, Fourier-transform infrared spectroscopy, and high-resolution mass spectrometry. Test paper experiments showed that the AXS probe could detect Zn2+ in real samples. In addition, quantitative and qualitative detection of Zn2+ in common foodstuffs was achieved. For portable Zn2+ detection, a smartphone detection platform was also developed based on the AXS probe. Importantly, the AXS probe showed good bioimaging capabilities in Caenorhabditis elegans and mice.

A multifunctional sensor for detecting tetracycline, 4-nitrophenol, and pesticides.

In recent years, due to the abuse of antibiotics, nitro explosives and pesticides, which have caused great harm to the environment and human health, social concerns have prompted researchers to develop more sensitive detection platforms for these pollutants. In this paper, a novel two-dimensional Zn (II) coordination polymer, [Zn(L)0.5(1,2-bimb)]·DMF (1), [H4L=[1,1':4',1''-terphenyl]-2, 2'',4, 4'' -tetracarboxylic acid, 1,2-bimb = 1,2-bis(imidazol-1-ylmethyl)benzene] was synthesized using a hydro-solvothermal method. Among commonly used organic solvents, 1 exhibits significant stability. Fast and efficient fluorescence response can be achieved for tetracycline (TET), 4-nitrophenol (4-NP), fluazinam (FLU), and abamectin benzoate (AMB) with low detection limits. A binary intelligent logic gate device with FLU and AMB as chemical input signals is successfully constructed, which provides a new idea for biochemical detection. In addition, a portable visual test paper has been prepared, which has high sensitivity, good selectivity, and simple operation. It can be used for rapid detection of pollutants in daily life and has broad application prospects. Finally, a detailed discussion was conducted on the fluorescence sensing mechanism of 1 for detecting TET, 4-NP, AMB and FLU.

Utilizing Carbon Dots Derived from Waste Face Masks for Pentachlorophenol Detection.

Pentachlorophenol is a very toxic chemical that is used as a pesticide, fungicide, herbicide, wood preservative, etc., and it should be monitored in terms of human health and environmental production. Another environmental problem is the increase in the use of facemasks, especially during the COVID-19 pandemic. This study provides a value added chemicals to sustainability of recycling process. Fluorescent carbon dots (CDs) were synthesized from waste facemasks and investigated their fluorescence sensor performances. UV-Vis and fluorescence spectra of the synthesized carbon dots were recorded in different organic solvents. The sensor properties of these carbon dots against pesticides were investigated, and a 'turn-off' response was observed toward pentachlorophenol. The limit of detection was found 8.5 µM in the linear range from 43.3 µM to 375 µM. This study showed that waste plastics such as facemasks can be recycled to obtain carbon dots, which are used in different technological areas such as photocatalysis, bioimaging, etc., as well as in sensors.

Development of a new nanosensor for the determination of food coloring Sunset Yellow in powder drinks using L-cysteine coated copper nanoclusters.

Sunset Yellow (SY), which is an artificial azo dye, is preferable for its high stability and low cost. The determination of SY in foods is extremely important for human health because excessive consumption of SY has harmful effects, such as hyperactivity disorder and cancer. In this method, L-cysteine coated copper nanoclusters (CuNCs) were used as a fluorescence probe. L-cysteine has been used as both a reducing and stabilizing agent. One-step green hydrothermal synthesis of CuNCs was made. L-cysteine-coated CuNCs have been characterized using several of methods. CuNCs quenching mechanism is static and inner filter effect (IFE). The linear range is 0.65-14 µg.ml-1 at optimum conditions. LOD and LOQ values were calculated as 0.1 and 0.35 µg.ml-1, respectively. The proposed method was used for the determination of SY in different type of powder drinks. The developed nanosensor is environmentally friendly, easy, fast, reproducible, and low cost.

CsPbBr3 NCs Confined and In Situ Grown in ZIF-8: A Stable, Sensitive, Reliable Fluorescent Sensor for Evaluating the Acid Value of Edible Oils.

Rapidly and sensitively evaluating the acid value (AV) of edible oils is significant to ensuring food quality and safety. Cesium lead bromide perovskite nanocrystals (CsPbBr3 NCs) are an effective candidate for AV detection; however, their instability restricts wide applications. Herein, CsPbBr3@ZIF-8 was prepared by confining and growing CsPbBr3 NCs in situ into zeolitic imidazolate framework-8 (ZIF-8) to improve the stability, and a fluorescence sensor was established to evaluate the AV of edible oils. The results present that CsPbBr3 NCs (below 5 nm) with excellent optical properties were confined and grown in situ in micropores and mesopores of ZIF-8. Meanwhile, CsPbBr3@ZIF-8 had better long-term storage, ultraviolet-irradiation, and water-exposure stabilities, compared with CsPbBr3 NCs. Given the fact that free fatty acids (the major contributor of AV) decrease the fluorescence of CsPbBr3 NCs, the fluorescence intensities of CsPbBr3@ZIF-8 were negative-linearly related to oil AV (R2 = 0.9902) in 0.04-6.00 mg of KOH/g with a 0.06 mg of KOH/g limit of detection. Besides, the practical AV recovery was 92-101% with an average relative standard deviation of 2%. Furthermore, the detection time was 20 min. The response mechanism revealed that free fatty acids could remove surface ligands and increase surface defects to prompt the aggregation of CsPbBr3 NCs and the formation of lattice fringe dislocations, inducing a decrease in the fluorescence. Thus, a stable, sensitive, reliable sensor was established to evaluate the AV of edible oils.