Respiratory Oscillometry and Functional Performance in Different COPD Phenotypes.

Purpose: Chronic obstructive pulmonary disease (COPD) phenotypes may introduce different characteristics that need to be known to improve treatment. Respiratory oscillometry provides a detailed analysis and may offer insight into the pathophysiology of COPD. In this paper, we used this method to evaluate the differences in respiratory mechanics of COPD phenotypes. Patients and Methods: This study investigated a sample of 83 volunteers, being divided into control group (CG = 20), emphysema (n = 23), CB (n = 20) and asthma-COPD overlap syndrome (ACOS, n = 20). These analyses were performed before and after bronchodilator (BD) use. Functional capacity was evaluated using the Glittre­ADL test, handgrip strength and respiratory pressures. Results: Initially it was observed that oscillometry provided a detailed description of the COPD phenotypes, which was consistent with the involved pathophysiology. A correlation between oscillometry and functional capacity was observed (r=-0.541; p = 0.0001), particularly in the emphysema phenotype (r = -0.496, p = 0.031). BD response was different among the studied phenotypes. This resulted in an accurate discrimination of ACOS from CB [area under the receiver operating curve (AUC) = 0.84] and emphysema (AUC = 0.82). Conclusion: These results offer evidence that oscillatory indices may enhance the comprehension and identification of COPD phenotypes, thereby potentially improving the support provided to these patients.

Oscillometry of the respiratory system in Parkinson's disease: physiological changes and diagnostic use.

BACKGROUND: Lung function analysis in Parkinson's disease (PD) is often difficult due to the demand for adequate forced expiratory maneuvers. Respiratory oscillometry exams require onlyquiet tidal breathing and provide a detailed analysis of respiratory mechanics. We hypothesized that oscillometry would simplify the diagnosis of respiratory abnormalitiesin PD and improve our knowledge about the pathophysiological changes in these patients. MATERIALS AND METHODS: This observational study includes 20 controls and 47 individuals with PD divided into three groups (Hoehn and Yahr Scale 1-1.5; H&Y scale 2-3 and PD smokers).The diagnostic accuracy was evaluated by investigating the area under the receiver operating characteristic curve (AUC). RESULTS: Initial stages are related to increased peripheral resistance (Rp; p = 0.001). In more advanced stages, a restrictive pattern is added, reflected by reductions in dynamic compliance (p < 0.05) and increase in resonance frequency (Fr; p < 0.001). Smoking PD patients presented increased Rp (p < 0.001) and Fr (p < 0.01). PD does not introduce changes in the central airways. Oscillometric changes were correlated with respiratory muscle weakness (R = 0.37, p = 0.02). Rp showed adequate accuracy in the detection of early respiratory abnormalities (AUC = 0.858), while in more advanced stages, Fr showed high diagnostic accuracy (AUC = 0.948). The best parameter to identify changes in smoking patients was Rp (AUC = 0.896). CONCLUSION: The initial stages of PD are related to a reduction in ventilation homogeneity associated with changes in peripheral airways. More advanced stages also include a restrictive ventilatory pattern. These changes were correlated with respiratory muscle weakness and were observed in mild and moderate stages of PD in smokers and non-smokers. Oscillometry may adequately identify respiratory changes in the early stages of PD and obtain high diagnostic accuracy in more advanced stages of the disease.

Respiratory oscillometry and functional analyses in patients with idiopathic scoliosis

Scoliosis is a condition that affects the spine and causes chest rotation and trunk distortion. Individuals with severe deformities may experience dyspnea on exertion and develop respiratory failure. Respiratory oscillometry is a simple and non-invasive method that provides detailed information on lung mechanics. This work aims to investigate the potential of oscillometry in the evaluation of respiratory mechanics in patients with scoliosis and its association with physical performance. We analyzed 32 volunteers in the control group and 32 in the scoliosis group. The volunteers underwent traditional pulmonary function tests, oscillometry, and the 6-minute walk test (6MWT). Oscillometric analysis showed increased values of resistance at 4 Hz (R4, P<0.01), 12 Hz (R12, P<0.0001), and 20 Hz (R20, P<0.01). Similar analysis showed reductions in dynamic compliance (Cdyn, P<0.001) and ventilation homogeneity, as evaluated by resonance frequency (fr, P<0.001) and reactance area (Ax, P<0.001). Respiratory work, described by the impedance modulus, also showed increased values (Z4, P<0.01). Functional capacity was reduced in the group with scoliosis (P<0.001). A significant direct correlation was found between Cobb angle and R12, AX, and Z4 (P=0.0237, P=0.0338, and P=0.0147, respectively), and an inverse correlation was found between Cdyn and Cobb angle (P=0.0190). These results provided new information on respiratory mechanics in scoliosis and are consistent with the involved pathophysiology, suggesting that oscillometry may improve lung function tests for patients with scoliosis.

Explainable machine learning methods and respiratory oscillometry for the diagnosis of respiratory abnormalities in sarcoidosis.

BACKGROUND: In this work, we developed many machine learning classifiers to assist in diagnosing respiratory changes associated with sarcoidosis, based on results from the Forced Oscillation Technique (FOT), a non-invasive method used to assess pulmonary mechanics. In addition to accurate results, there is a particular interest in their interpretability and explainability, so we used Genetic Programming since the classification is made with intelligible expressions and we also evaluate the feature importance in different experiments to find the more discriminative features. METHODOLOGY/PRINCIPAL FINDINGS: We used genetic programming in its traditional tree form and a grammar-based form. To check if interpretable results are competitive, we compared their performance to K-Nearest Neighbors, Support Vector Machine, AdaBoost, Random Forest, LightGBM, XGBoost, Decision Trees and Logistic Regressor. We also performed experiments with fuzzy features and tested a feature selection technique to bring even more interpretability. The data used to feed the classifiers come from the FOT exams in 72 individuals, of which 25 were healthy, and 47 were diagnosed with sarcoidosis. Among the latter, 24 showed normal conditions by spirometry, and 23 showed respiratory changes. The results achieved high accuracy (AUC > 0.90) in two analyses performed (controls vs. individuals with sarcoidosis and normal spirometry and controls vs. individuals with sarcoidosis and altered spirometry). Genetic Programming and Grammatical Evolution were particularly beneficial because they provide intelligible expressions to make the classification. The observation of which features were selected most frequently also brought explainability to the study of sarcoidosis. CONCLUSIONS: The proposed system may provide decision support for clinicians when they are struggling to give a confirmed clinical diagnosis. Clinicians may reference the prediction results and make better decisions, improving the productivity of pulmonary function services by AI-assisted workflow.

Respiratory Oscillometry in Chronic Obstructive Pulmonary Disease: Association with Functional Capacity as Evaluated by Adl Glittre Test and Hand Grip Strength Test.

Purpose: Respiratory oscillometry has emerged as a powerful method for detecting respiratory abnormalities in COPD. However, this method has not been widely introduced into clinical practice. This limitation arises, at least in part, because the clinical meaning of the oscillometric parameters is not clear. In this paper, we evaluated the association of oscillometry with functional capacity and its ability to predict abnormal functional capacity in COPD. Patients and Methods: This cross-sectional study investigated a control group formed by 30 healthy subjects and 30 outpatients with COPD. The subjects were classified by the Glittre­ADL test and handgrip strength according to the functional capacity. Results: This study has shown initially that subjects with abnormal functional capacity had a higher value for resistance (p < 0.05), reactance area (Ax, p < 0.01), impedance modulus (Z4, p < 0.05), and reduced dynamic compliance (Cdyn, p < 0.05) when compared with subjects with normal functional capacity. This resulted in significant and consistent correlations among resistive oscillometric parameters (R=-0.43), Cdyn (R=-0.40), Ax (R = 0.42), and Z4 (R = 0.41) with exercise performance. Additionally, the effects of exercise limitation in COPD were adequately predicted, as evaluated by the area under the curve (AUC) obtained by receiver operating characteristic analysis. The best parameters for this task were R4-R20 (AUC = 0.779) and Ax (AUC = 0.752). Conclusion: Respiratory oscillometry provides information related to functional capacity in COPD. This method is also able to predict low exercise tolerance in these patients. These findings elucidate the physiological and clinical meaning of the oscillometric parameters, improving the interpretation of these parameters in COPD patients.

A comparison of endotracheal tube compensation techniques for the measurement of respiratory mechanical impedance at low frequencies.

Measurement of respiratory impedance ([Formula: see text]) in intubated patients requires accurate compensation for pressure losses across the endotracheal tube (ETT). In this study, we compared time-domain (TD), frequency-domain (FD) and combined time-/frequency-domain (FT) methods for ETT compensation. We measured total impedance ([Formula: see text]) of a test lung in series with three different ETT sizes, as well as in three intubated porcine subjects. Pressure measurement at the distal end of the ETT was used to determine the true [Formula: see text]. For TD compensation, pressure distal to the ETT was obtained based on its resistive and inertial properties, and the corresponding [Formula: see text] was estimated. For FD compensation, impedance of the isolated ETT was obtained from oscillatory flow and pressure waveforms, and then subtracted from [Formula: see text]. For TF compensation, the nonlinear resistive properties of the ETT were subtracted from the proximal pressure measurement, from which the linear resistive and inertial ETT properties were removed in the frequency-domain to obtain [Formula: see text]. The relative root mean square error between the actual and estimated [Formula: see text] ([Formula: see text]) showed that TD compensation yielded the least accurate estimates of [Formula: see text] for the in vitro experiments, with small deviations observed at higher frequencies. The FD and TF compensations yielded estimates of [Formula: see text] with similar accuracies. For the porcine subjects, no significant differences were observed in [Formula: see text] across compensation methods. FD and TF compensation of the ETT may allow for accurate oscillometric estimates of [Formula: see text] in intubated subjects, while avoiding the difficulties associated with direct tracheal pressure measurement.

Signal processing to remove spurious contributions to the assessment of respiratory mechanics.

Signal disruptions in small animals during the realization of the Forced Oscillation Technique are a well-known cause of data loss as it leads to non-reliable estimations of the respiratory impedance. In this work, we assessed the effects of removing the disrupted epoch when a 3-seconds input signal composed of one and a half 2-seconds full cycle is used.We tested our hypothesis in 25 SAMR1 mice under different levels of bronchoconstriction due to methacholine administration by iv bolus injections in different doses (15 animals) and by iv continuous infusion in different infusion rates (10 animals). Signal disruptions were computationally simulated as sharp drops in the pressure signal within a short timescale, and signal processing was performed using own developed algorithms.We found that the model goodness of fit worsens when averaging techniques to estimate the input respiratory impedance are not used. However, no statistically significant differences were observed in the comparison between Constant Phase Model parameters of the full 3-s signal and the 2-s non disrupted epoch in all doses or infusion rates for both methacholine delivery strategies.The proposed technique presents reliable outcomes that can reduce animal use in Forced Oscillation Technique realization.

Machine learning associated with respiratory oscillometry: a computer-aided diagnosis system for the detection of respiratory abnormalities in systemic sclerosis.

INTRODUCTION: The use of machine learning (ML) methods would improve the diagnosis of respiratory changes in systemic sclerosis (SSc). This paper evaluates the performance of several ML algorithms associated with the respiratory oscillometry analysis to aid in the diagnostic of respiratory changes in SSc. We also find out the best configuration for this task. METHODS: Oscillometric and spirometric exams were performed in 82 individuals, including controls (n = 30) and patients with systemic sclerosis with normal (n = 22) and abnormal (n = 30) spirometry. Multiple instance classifiers and different supervised machine learning techniques were investigated, including k-Nearest Neighbors (KNN), Random Forests (RF), AdaBoost with decision trees (ADAB), and Extreme Gradient Boosting (XGB). RESULTS AND DISCUSSION: The first experiment of this study showed that the best oscillometric parameter (BOP) was dynamic compliance, which provided moderate accuracy (AUC = 0.77) in the scenario control group versus patients with sclerosis and normal spirometry (CGvsPSNS). In the scenario control group versus patients with sclerosis and altered spirometry (CGvsPSAS), the BOP obtained high accuracy (AUC = 0.94). In the second experiment, the ML techniques were used. In CGvsPSNS, KNN achieved the best result (AUC = 0.90), significantly improving the accuracy in comparison with the BOP (p < 0.01), while in CGvsPSAS, RF obtained the best results (AUC = 0.97), also significantly improving the diagnostic accuracy (p < 0.05). In the third, fourth, fifth, and sixth experiments, different feature selection techniques allowed us to spot the best oscillometric parameters. They resulted in a small increase in diagnostic accuracy in CGvsPSNS (respectively, 0.87, 0.86, 0.82, and 0.84), while in the CGvsPSAS, the best classifier's performance remained the same (AUC = 0.97). CONCLUSIONS: Oscillometric principles combined with machine learning algorithms provide a new method for diagnosing respiratory changes in patients with systemic sclerosis. The present study's findings provide evidence that this combination may help in the early diagnosis of respiratory changes in these patients.

Combined forced oscillation and fractional-order modeling in patients with work-related asthma: a case-control study analyzing respiratory biomechanics and diagnostic accuracy.

BACKGROUND: Fractional-order (FrOr) models have a high potential to improve pulmonary science. These models could be useful for biomechanical studies and diagnostic purposes, offering accurate models with an improved ability to describe nature. This paper evaluates the performance of the Forced Oscillation (FO) associated with integer (InOr) and FrOr models in the analysis of respiratory alterations in work-related asthma (WRA). METHODS: Sixty-two individuals were evaluated: 31 healthy and 31 with WRA with mild obstruction. Patients were analyzed pre- and post-bronchodilation. The diagnostic accuracy was evaluated using the area under the receiver operating characteristic curve (AUC). To evaluate how well do the studied models correspond to observed data, we analyzed the mean square root of the sum (MSEt) and the relative distance (Rd) of the estimated model values to the measured resistance and reactance measured values. RESULTS AND DISCUSSION: Initially, the use of InOr and FrOr models increased our understanding of the WRA physiopathology, showing increased peripheral resistance, damping, and hysteresivity. The FrOr model (AUC = 0.970) outperformed standard FO (AUC = 0.929), as well as InOr modeling (AUC = 0.838) in the diagnosis of respiratory changes, achieving high accuracy. FrOr improved the curve fitting (MSEt = 0.156 ± 0.340; Rd = 3.026 ± 1.072) in comparison with the InOr model (MSEt = 0.367 ± 0.991; Rd = 3.363 ± 1.098). Finally, we demonstrated that bronchodilator use increased dynamic compliance, as well as reduced damping and peripheral resistance. CONCLUSIONS: Taken together, these results show clear evidence of the utility of FO associated with fractional-order modeling in patients with WRA, improving our knowledge of the biomechanical abnormalities and the diagnostic accuracy in this disease.

Differential diagnosis of asthma and restrictive respiratory diseases by combining forced oscillation measurements, machine learning and neuro-fuzzy classifiers.

To design machine learning classifiers to facilitate the clinical use and increase the accuracy of the forced oscillation technique (FOT) in the differential diagnosis of patients with asthma and restrictive respiratory diseases. FOT and spirometric exams were performed in 97 individuals, including controls (n = 20), asthmatic patients (n = 38), and restrictive (n = 39) patients. The first experiment of this study showed that the best FOT parameter was the resonance frequency, providing moderate accuracy (AUC = 0.87). In the second experiment, a neuro-fuzzy classifier and different supervised machine learning techniques were investigated, including k-nearest neighbors, random forests, AdaBoost with decision trees, and support vector machines with a radial basis kernel. All classifiers achieved high accuracy (AUC ≥ 0.9) in the differentiation between patient groups. In the third and fourth experiments, the use of different feature selection techniques allowed us to achieve high accuracy with only three FOT parameters. In addition, the neuro-fuzzy classifier also provided rules to explain the classification. Neuro-fuzzy and machine learning classifiers can aid in the differential diagnosis of patients with asthma and restrictive respiratory diseases. They can assist clinicians as a support system providing accurate diagnostic options.

Association of respiratory integer and fractional-order models with structural abnormalities in silicosis.

BACKGROUND AND OBJECTIVE: Integer and fractional-order models have emerged as powerful methods for obtaining information regarding the anatomical or pathophysiological changes that occur during respiratory diseases. However, the precise interpretation of the model parameters in light of the lung structural changes is not known. This study analyzed the associations of the integer and fractional-order models with structural changes obtained using multidetector computed tomography densitometry (MDCT) and pulmonary function analysis. METHODS: Integer and fractional-order models were adjusted to data obtained using the forced oscillation technique (FOT). The results obtained in controls (n = 20) were compared with those obtained in patients with silicosis (n = 32), who were submitted to spirometry, body plethysmograph, FOT, diffusing capacity of the lungs for carbon monoxide (DLCO), and MDCT. The diagnostic accuracy was also investigated using ROC analysis. RESULTS: The observed changes in the integer and fractional-order models were consistent with the pathophysiology of silicosis. The integer-order model showed association only between inertance and the non-aerated compartment (R = -0.69). This parameter also presented the highest associations with spirometry (R = 0.81), plethysmography (-0.61) and pulmonary diffusion (R = 0.53). Considering the fractional-order model, the increase in the poorly aerated and non-aerated regions presented direct correlations with the fractional inertance (R = 0.48), respiratory damping (R = 0.37) and hysteresivity (R = 0.54) and inverse associations with its fractional exponent (R = -0.62) and elastance (-0.35). Significant associations were also observed with spirometry (R = 0.63), plethysmography (0.37) and pulmonary diffusion (R = 0.51). Receiver operator characteristic analysis showed a higher accuracy in the FrOr model (0.908) than the eRIC model (0.789). CONCLUSIONS: Our study has shown clear associations of the integer and fractional-order parameters with anatomical changes obtained via MDCT and pulmonary function measurements. These findings help to elucidate the physiological interpretation of the integer and fractional-order parameters and provide evidence that these parameters are reflective of the abnormal changes in silicosis. We also observed that the fractional-order model showed smaller curve-fitting errors, which resulted in a higher diagnostic accuracy than that of the eRIC model. Taken together, these results provide strong motivation for further studies exploring the clinical and scientific use of these models in respiratory medicine.

Entropy Analysis for the Evaluation of Respiratory Changes Due to Asbestos Exposure and Associated Smoking.

Breathing is a complex rhythmic motor act, which is created by integrating different inputs to the respiratory centres. Analysing nonlinear fluctuations in breathing may provide clinically relevant information in patients with complex illnesses, such as asbestosis. We evaluated the effect of exposition to asbestos on the complexity of the respiratory system by investigating the respiratory impedance sample entropy (SampEnZrs) and recurrence period density entropy (RPDEnZrs). Similar analyses were performed by evaluating the airflow pattern sample entropy (SampEnV') and recurrence period density entropy (RPDEnV'). Groups of 34 controls and 34 asbestos-exposed patients were evaluated in the respiratory impedance entropy analysis, while groups of 34 controls and 30 asbestos-exposed patients were investigated in the analysis of airflow entropy. Asbestos exposition introduced a significant reduction of RPDEnV' in non-smoker patients (p < 0.0004), which suggests that the airflow pattern becomes less complex in these patients. Smoker patients also presented a reduction in RPDEnV' (p < 0.05). These finding are consistent with the reduction in respiratory system adaptability to daily life activities observed in these patients. It was observed a significant reduction in SampEnV' in smoker patients in comparison with non-smokers (p < 0.02). Diagnostic accuracy evaluations in the whole group of patients (including non-smokers and smokers) indicated that RPDEnV' might be useful in the diagnosis of respiratory abnormalities in asbestos-exposed patients, showing an accuracy of 72.0%. In specific groups of non-smokers, RPDEnV' also presented adequate accuracy (79.0%), while in smoker patients, SampEnV' and RPDEnV' presented adequate accuracy (70.7% and 70.2%, respectively). Taken together, these results suggest that entropy analysis may provide an early and sensitive functional indicator of interstitial asbestosis.

Reference values for respiratory impedance measured by the forced oscillation technique in adult men and women.

INTRODUCTION: The forced oscillation technique (FOT) is a particularly useful test of the mechanical properties of the respiratory system that has an increasingly important role in lung function laboratories. There is general agreement in the literature that the determination of reference values is of utmost importance in the clinical use of the FOT. OBJECTIVE: Our aim was to present reference values for whole-breath FOT measurements, establish which anthropometric variables were more predictive of impedance parameters, and provide all the details to adequately adopt these reference equations in individual laboratories. METHODS: We prospectively evaluated a randomly selected non-smoking sample of the adult Brazilian population (288 subjects, 144 males and 144 females aged 20-86 years). The volunteers were separated by sex and divided into six groups based on decade of age. Sex-specific linear prediction equations were developed by multiple regression analysis using age, body mass and height as explanatory variables. RESULTS: Age introduced a slight, but significant, reduction of resistance in men (P < .001) and women (P < .001). In general, significantly higher values of resistance were observed in females (P < .0001). Among the anthropometric variables analyzed, height was the best predictor for all parameters studied. CONCLUSION: This study provides an original frame of reference for the FOT in Brazilian males and females aged 20-86 years. Height was the best predictor of respiratory impedance parameters. Details contributing to an adequate adoption of these reference equations elsewhere by transference and verification are also provided.

The Role of Multidetector Computed Tomography and the Forced Oscillation Technique in Assessing Lung Damage in Adults With Cystic Fibrosis.

BACKGROUND: With increased survival rates and the consequent emergence of an adult population with cystic fibrosis (CF), developing novel tools for periodic evaluations of these patients has become a new challenge. Thus, we sought to determine the contribution of lung-volume quantification using multidetector computed tomography (CT) in adults with CF and to investigate the association between structural changes and functional abnormalities. METHODS: This was a cross-sectional study in which 21 adults with CF and 22 control subjects underwent lung-volume quantification using multidetector CT. Voxel densities were divided into 4 bands: -1,000 to -900 Hounsfield units (HU) (hyperaerated region), -900 to -500 HU (normally aerated region), -500 to -100 HU (poorly aerated region), and -100 to 100 HU (non-aerated region). In addition, all participants performed pulmonary function tests including spirometry, body plethysmography, diffusion capacity for carbon monoxide, and the forced oscillation technique. RESULTS: Adults with CF had more non-aerated regions and poorly aerated regions with lung-volume quantification using multidetector CT than controls. Despite these abnormalities, total lung volume measured by lung-volume quantification using multidetector CT did not differ between subjects and controls. Total lung capacity (TLC) measured by body plethysmography correlated with both total lung volume (rs = 0.71, P < .001) and total air volume (rs = 0.71, P < .001) as measured with lung-volume quantification using multidetector CT. While the hyperaerated regions correlated with the functional markers of gas retention in the lungs (increased residual volume (RV) and RV/TLC ratio), the poorly aerated regions correlated with the resistive parameters measured by the forced oscillation technique (increased intercept resistance and mean resistance). We also observed a correlation between normally aerated regions and highest pulmonary diffusion values (rs = 0.68, P < .001). CONCLUSIONS: In adults with CF, lung-volume quantification using multidetector CT can destimate the lung volumes of compartments with different densities and determine the aerated and non-aerated contents of the lungs; furthermore, lung-volume quantification using multidetector CT is clearly related to pulmonary function parameters.

High-accuracy detection of airway obstruction in asthma using machine learning algorithms and forced oscillation measurements.

BACKGROUND AND OBJECTIVES: The main pathologic feature of asthma is episodic airway obstruction. This is usually detected by spirometry and body plethysmography. These tests, however, require a high degree of collaboration and maximal effort on the part of the patient. There is agreement in the literature that there is a demand of research into new technologies to improve non-invasive testing of lung function. The purpose of this study was to develop automatic classifiers to simplify the clinical use and to increase the accuracy of the forced oscillation technique (FOT) in the diagnosis of airway obstruction in patients with asthma. METHODS: The data consisted of FOT parameters obtained from 75 volunteers (39 with obstruction and 36 without). Different supervised machine learning (ML) techniques were investigated, including k-nearest neighbors (KNN), random forest (RF), AdaBoost with decision trees (ADAB) and feature-based dissimilarity space classifier (FDSC). RESULTS: The first part of this study showed that the best FOT parameter was the resonance frequency (AUC = 0.81), which indicates moderate accuracy (0.70-0.90). In the second part of this study, the use of the cited ML techniques was investigated. All the classifiers improved the diagnostic accuracy. Notably, ADAB and KNN were very close to achieving high accuracy (AUC = 0.88 and 0.89, respectively). Experiments including the cross products of the FOT parameters showed that all the classifiers improved the diagnosis accuracy and KNN was able to reach a higher accuracy range (AUC = 0.91). CONCLUSIONS: Machine learning classifiers can help in the diagnosis of airway obstruction in asthma patients, and they can assist clinicians in airway obstruction identification.

Relationship between Mean Airways Pressure, Lung Mechanics, and Right Ventricular Output during High-Frequency Oscillatory Ventilation in Infants.

OBJECTIVE: To characterize changes in lung mechanics and right ventricular output (RVO) during incremental/decremental continuous distending pressure (CDP) maneuvers in newborn infants receiving high-frequency oscillatory ventilation, with the aim of evaluating when open lung maneuvers are needed and whether they are beneficial. STUDY DESIGN: Thirteen infants on high-frequency oscillatory ventilation were studied with a median (IQR) gestational age of 261 (253-291) weeks and median (IQR) body weight of 810 (600-1020) g. CDP was increased stepwise from 8 cmH2O to a maximum pressure and subsequently decreased until oxygenation deteriorated or a CDP of 8 cmH2O was reached. The lowest CDP that maintained good oxygenation was considered the clinically optimal CDP. At each CDP, the following variables were evaluated: oxygenation, respiratory system reactance (Xrs), and RVO by Doppler echocardiography. RESULTS: At maximal CDP reached during the trial, 19 [1] cmH2O (mean [SEM]), oxygenation markedly improved, and Xrs and RVO decreased. During deflation, oxygenation remained stable over a wide range of CDP settings, Xrs returned to the baseline values, and RVO increased but the baseline values were not readily restored in all patients. CONCLUSION: These results suggest that Xrs and RVO are more sensitive than oxygenation to overdistension and they may be useful in clinical practice to guide open lung maneuvers.

Forced oscillation, integer and fractional-order modeling in asthma.

The purpose of this study was to evaluate the use of fractional-order (FrOr) modeling in asthma. To this end, three FrOr models were compared with traditional parameters and an integer-order model (InOr). We investigated which model would best fit the data, the correlation with traditional lung function tests and the contribution to the diagnostic of airway obstruction. The data consisted of forced oscillation (FO) measurements obtained from healthy (n=22) and asthmatic volunteers with mild (n=22), moderate (n=19) and severe (n=19) obstructions. The first part of this study showed that a FrOr was the model that best fit the data (relative distance: FrOr=4.3±2.4; InOr=5.1±2.6%). The correlation analysis resulted in reasonable (R=0.36) to very good (R=0.77) associations between FrOr parameters and spirometry. The closest associations were observed between parameters related to peripheral airway obstruction, showing a clear relationship between the FrOr models and lung mechanics. Receiver-operator analysis showed that FrOr parameters presented a high potential to contribute to the detection of the mild obstruction in a clinical setting. The accuracy [area under the Receiver Operating Characteristic curve (AUC)] observed in these parameters (AUC=0.954) was higher than that observed in traditional FO parameters (AUC=0.732) and that obtained from the InOr model (AUC=0.861). Patients with moderate and severe obstruction were identified with high accuracy (AUC=0.972 and 0.977, respectively). In conclusion, the results obtained are in close agreement with asthma pathology, and provide evidence that FO measurement associated with FrOr models is a non-invasive, simple and radiation-free method for the detection of biomechanical abnormalities in asthma.

Correlations between forced oscillation technique parameters and pulmonary densitovolumetry values in patients with acromegaly

The aims of this study were to evaluate the forced oscillation technique (FOT) and pulmonary densitovolumetry in acromegalic patients and to examine the correlations between these findings. In this cross-sectional study, 29 non-smoking acromegalic patients and 17 paired controls were subjected to the FOT and quantification of lung volume using multidetector computed tomography (Q-MDCT). Compared with the controls, the acromegalic patients had a higher value for resonance frequency [15.3 (10.9-19.7) vs 11.4 (9.05-17.6) Hz, P=0.023] and a lower value for mean reactance [0.32 (0.21-0.64) vs 0.49 (0.34-0.96) cm H2O/L/s2, P=0.005]. In inspiratory Q-MDCT, the acromegalic patients had higher percentages of total lung volume (TLV) for nonaerated and poorly aerated areas [0.42% (0.30-0.51%) vs 0.25% (0.20-0.32%), P=0.039 and 3.25% (2.48-3.46%) vs 1.70% (1.45-2.15%), P=0.001, respectively]. Furthermore, the acromegalic patients had higher values for total lung mass in both inspiratory and expiratory Q-MDCT [821 (635-923) vs 696 (599-769) g, P=0.021 and 844 (650-945) vs 637 (536-736) g, P=0.009, respectively]. In inspiratory Q-MDCT, TLV showed significant correlations with all FOT parameters. The TLV of hyperaerated areas showed significant correlations with intercept resistance (rs=−0.602, P<0.001) and mean resistance (rs=−0.580, P<0.001). These data showed that acromegalic patients have increased amounts of lung tissue as well as nonaerated and poorly aerated areas. Functionally, there was a loss of homogeneity of the respiratory system. Moreover, there were correlations between the structural and functional findings of the respiratory system, consistent with the pathophysiology of the disease.

Within-breath respiratory impedance and airway obstruction in patients with chronic obstructive pulmonary disease

OBJECTIVE: Recent work has suggested that within-breath respiratory impedance measurements performed using the forced oscillation technique may help to noninvasively evaluate respiratory mechanics. We investigated the influence of airway obstruction on the within-breath forced oscillation technique in smokers and chronic obstructive pulmonary disease patients and evaluated the contribution of this analysis to the diagnosis of chronic obstructive pulmonary disease. METHODS: Twenty healthy individuals and 20 smokers were assessed. The study also included 74 patients with stable chronic obstructive pulmonary disease. We evaluated the mean respiratory impedance (Zm) as well as values for the inspiration (Zi) and expiration cycles (Ze) at the beginning of inspiration (Zbi) and expiration (Zbe), respectively. The peak-to-peak impedance (Zpp=Zbe-Zbi) and the respiratory cycle dependence (ΔZrs=Ze-Zi) were also analyzed. The diagnostic utility was evaluated by investigating the sensitivity, the specificity and the area under the receiver operating characteristic curve. ClinicalTrials.gov: NCT01888705. RESULTS: Airway obstruction increased the within-breath respiratory impedance parameters that were significantly correlated with the spirometric indices of airway obstruction (R=−0.65, p<0.0001). In contrast to the control subjects and the smokers, the chronic obstructive pulmonary disease patients presented significant expiratory-inspiratory differences (p<0.002). The adverse effects of moderate airway obstruction were detected based on the Zpp with an accuracy of 83%. Additionally, abnormal effects in severe and very severe patients were detected based on the Zm, Zi, Ze, Zbe, Zpp and ΔZrs with a high degree of accuracy (>90%). CONCLUSIONS: We conclude the following: (1) chronic obstructive pulmonary disease introduces higher respiratory cycle dependence, (2) this increase is proportional to airway obstruction, and (3) ...

Machine learning algorithms and forced oscillation measurements to categorise the airway obstruction severity in chronic obstructive pulmonary disease.

The purpose of this study was to develop automatic classifiers to simplify the clinical use and increase the accuracy of the forced oscillation technique (FOT) in the categorisation of airway obstruction level in patients with chronic obstructive pulmonary disease (COPD). The data consisted of FOT parameters obtained from 168 volunteers (42 healthy and 126 COPD subjects with four different levels of obstruction). The first part of this study showed that FOT parameters do not provide adequate accuracy in identifying COPD subjects in the first levels of obstruction, as well as in discriminating between close levels of obstruction. In the second part of this study, different supervised machine learning (ML) techniques were investigated, including k-nearest neighbour (KNN), random forest (RF) and support vector machines with linear (SVML) and radial basis function kernels (SVMR). These algorithms were applied only in situations where high categorisation accuracy [area under the Receiver Operating Characteristic curve (AUC)≥0.9] was not achieved with the FOT parameter alone. It was observed that KNN and RF classifiers improved categorisation accuracy. Notably, in four of the six cases studied, an AUC≥0.9 was achieved. Even in situations where an AUC≥0.9 was not achieved, there was a significant improvement in categorisation performance (AUC≥0.83). In conclusion, machine learning classifiers can help in the categorisation of COPD airway obstruction. They can assist clinicians in tracking disease progression, evaluating the risk of future disease exacerbations and guiding therapy.