RESUMO
Controlling heavy metal pollution in agricultural soil has been a significant challenge. These heavy metals seriously threaten the surrounding ecological environment and human health. The effective assessment and remediation of heavy metals in agricultural soils are crucial. These two aspects support each other, forming a close and complete decision-making chain. Therefore, this review systematically summarizes the distribution characteristics of soil heavy metal pollution, the correlation between soil and crop heavy metal contents, the presence pattern and migration and transformation mode of heavy metals in the soil-crop system. The advantages and disadvantages of the risk evaluation tools and models of heavy metal pollution in farmland are further outlined, which provides important guidance for an in-depth understanding of the characteristics of heavy metal pollution in farmland soils and the assessment of the environmental risk. Soil remediation strategies involve multiple physical, chemical, biological and even combined technologies, and this paper compares the potential and effect of the above current remediation technologies in heavy metal polluted farmland soils. Finally, the main problems and possible research directions of future heavy metal risk assessment and remediation technologies in agricultural soils are prospected. This review provides new ideas for effective assessment and selection of remediation technologies based on the characterization of soil heavy metals.
Assuntos
Agricultura , Monitoramento Ambiental , Recuperação e Remediação Ambiental , Metais Pesados , Poluentes do Solo , Solo , Metais Pesados/análise , Poluentes do Solo/análise , Recuperação e Remediação Ambiental/métodos , Agricultura/métodos , Medição de Risco , Solo/química , Poluição AmbientalRESUMO
Due to the diverse controlling factors and their uneven spatial distribution, especially atmospheric deposition from smelters, assessing and predicting the accumulation of heavy metals (HM) in crops across smelting-affected areas becomes challenging. In this study, integrating HM influx from atmospheric deposition, a boosted regression tree model with an average R2 > 0.8 was obtained to predict accumulation of Pb, As, and Cd in wheat grain across a smelting region. The atmospheric deposition serves as the dominant factor influencing the accumulation of Pb (28.2 %) and As (31.2 %) in wheat grain, but shows a weak influence on Cd accumulation (12.1 %). The contents of available HM in soil affect HM accumulation in wheat grain more significantly than their total contents in soil with relative importance rates of Pb (14.4 % > 8.2 %), As (30.9 % > 4.0 %), and Cd (55.0 % > 16.9 %), respectively. Marginal effect analysis illustrates that HM accumulation in wheat grain begins to intensify when Pb content in atmospheric dust reaches 5140 mg/kg and available Cd content in soil exceeds 1.15 mg/kg. The path analysis rationalizes the cascading effects of distances from study sites to smelting factories on HM accumulation in wheat grain via negatively influencing atmospheric HM deposition. The study provides data support and a theoretical basis for the sustainable development of non-ferrous metal smelting industry, as well as for the restoration and risk management of HM-contaminated soils.
RESUMO
The extraction of crude oil and gold has substantially increased heavy metal contamination in the environment, yet the study of wildlife exposure and biological response to this pollution remains nascent even in the most biodiverse places in the world. We present a survey of heavy metal exposure in the feathers of wedge-billed woodcreepers (Glyphorynchus spirurus), a resident neotropical bird found within protected regions of the Amazon near oil and gold extraction sites. Our results show elevated heavy metal contamination in samples collected from protected areas proximate to known oil and gold extraction. Surprisingly, several samples from remote reference sites also displayed elevated levels of various heavy metals, suggesting a background of natural deposition or complex heavy metal contamination in the environment from anthropogenic sources. These results highlight the need to understand the ecological and biological impacts of increased heavy metal exposure on wildlife across space and time, including remote regions of the world purportedly untouched by these human-mediated stressors. Toward this goal, historical and contemporary data from native bird populations may provide crucial indicators for heavy metal contamination and exposure in wildlife and human communities. Environ Toxicol Chem 2024;00:1-7. © 2024 The Author(s). Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.
RESUMO
Premise plumbing water quality degradation has led to negative health impacts from pathogen outbreaks (e.g., Legionella pneumophila and non-tuberculous mycobacteria), as well as chronic effects from exposure to heavy metals or disinfection by-products (DBP). Common water quality management interventions include flushing, heat shock (thermal disinfection), supplemental disinfection (shock or super chlorination), and water heater temperature setpoint change. In this study, a Legionella pneumophila- colonized Leadership in Energy and Environmental Design (LEED) certified building was monitored to study health-relevant water quality changes before and after three controlled management interventions: (1) flushing at several points throughout the building; (2) changing the water heater set point; and (3) a combination of interventions (1) and (2) by flushing during a period of elevated water heater set point (incompletely performed due to operational issues). Microbial (culturable L. pneumophila, the L. pneumophila mip gene, and cATP) and physico-chemical (pH, temperature, conductivity, disinfectant residual, disinfection by-products (DBPs; total trihalomethanes, TTHM), and heavy metals) water quality were monitored alongside building occupancy as approximated using Wi-Fi logins. Flushing alone resulted in a significant decrease in cATP and L. pneumophila concentrations (p = 0.018 and 0.019, respectively) and a significant increase in chlorine concentrations (p = 0.002) as well as iron and DBP levels (p = 0.002). Copper concentrations increased during the water heater temperature setpoint increase alone to 140°F during December 2022 (p = 0.01). During the flushing and elevated temperature in parts of the building in February 2023, there was a significant increase in chlorine concentrations (p = 0.002) and iron (p = 0.002) but no significant decrease in L. pneumophila concentrations in the drinking water samples (p = 0.27). This study demonstrated the potential impacts of short term or incompletely implemented interventions which in this case were not sufficient to holistically improve water quality. As implementing interventions is logistically- and time-intensive, more effective and holistic approaches are needed for informing preventative and corrective actions that are beneficial for multiple water quality and sustainability goals.
RESUMO
Exposure to mercury (Hg) and lead (Pb), in combination with liver and kidney impairment, may result in adverse birth outcomes. From 408 women in the age range of 16 to 46 years, living in rural and urban areas in the interior of Suriname, we looked at the association between adverse birth outcomes and exposure to Hg and Pb in combination with liver and kidney function. This group of women represented a subcohort of pregnant women who participated in the Caribbean Consortium for Research in Environmental and Occupational Health (CCREOH)-Meki Tamara study. Liver function was assessed by measuring aspartate amino transferase (AST), alanine amino transferase (ALT), and gamma-glutamyl transferase (GGT). Kidney function was assessed by measuring creatinine, urea, and cystatin C. We defined preterm births as birth before 37 weeks of gestation, low birthweight as birthweight < 2500 g, and low Apgar score as a score < 7 at 5 min, and these were used as indicators for adverse birth outcomes. Small size for gestational age was defined as gestational age < -2SD weight for GA. We found significant statistical associations between biomarkers for liver and kidney functions and adverse birth outcomes Apgar score and gestational age. No significant association was found between heavy metals Hg and lead and adverse birth outcomes.
RESUMO
Toxic and heavy metals cause direct and indirect damage to the environment and ultimately to humans. This study involved the isolation of indigenous bacteria from heavy metal-contaminated environments that have the ability to bioabsorb heavy metals such as cadmium, nickel, and lead. The bioabsorption process was optimized by varying parameters such as temperature, metal concentration, number of bacteria, pH, and more. The bacterial isolates were investigated in terms of morphology, biochemistry, and phylogeny, with 12 strains chosen in the initial stage and one strain chosen in the final stage. It should be remembered that the metal uptake capacity of all isolates was approximately calculated. A box and reactor were designed to house these optimized microorganisms. Based on biochemical, morphological, and molecular results, the isolated strain was found to be closely related to the Bacillus genus. In the first five steps of testing, the ideal pH for removing lead alone, lead with cadmium, lead with nickel, and lead ternary (with cadmium and nickel) by Bacillus bacteria was found to be 7, 6, 5.5, and 6.5, respectively. The absorption efficiencies for single lead (unary), lead together with nickel, cadmium (binary), and ternary (lead with cadmium and nickel) were found to be 0.36, 0.25, 0.22, and 0.21 mmol/g, respectively. The ideal temperature for lead removal was around 30 °C. The adsorption isotherm for each lead metal in different states was found to be similar to the Langmuir isotherm, indicating that the surface absorption process is a single-layer process. The kinetics of the process follow the second-order kinetic model. The amount of Bacillus bacteria biomass obtained during this process was approximately 1.5 g per liter.
Assuntos
Biofilmes , Reatores Biológicos , Metais Pesados , Metais Pesados/metabolismo , Reatores Biológicos/microbiologia , Biofilmes/crescimento & desenvolvimento , Biodegradação Ambiental , Níquel/metabolismo , Níquel/química , Cádmio/metabolismo , Bacillus/metabolismo , Filogenia , Concentração de Íons de Hidrogênio , Bactérias/metabolismo , Adsorção , Chumbo/metabolismo , TemperaturaRESUMO
Background: The recent interest among consumers in industrial hemp due to health and wellness benefits has led to several products from industrial hemp, including cannabidiol (CBD) oil. CBD oil extraction from hemp buds and flowers generates by-product biomass (hemp flakes), often posing disposal challenges and with little or no applications. We hypothesized that hemp flakes possess residual compounds with nutritional and health value that could be used to improve utilization. Methods: Locally sourced hemp flakes were compared to three commercial hemp protein products. The nutritional composition (proximate analysis), heavy metals (Al, Cu, As, Pb, Co, Cd), and functional composition (phenolic and antioxidant properties-total phenolic compounds (TPC), total flavonoid compounds (TFC), ferric reducing antioxidant potential (FRAP), 1,1-diphenyl-1-picrylhydrazyl (DPPH), Trolox equivalent antioxidant capacity (TEAC)), (CBD, cannabiodiolic acid-CBDA, cannabichromene-CBC, cannabigerol-CBG, and cannabinol-CBN) contents were determined and compared. Findings: Hemp flakes had a similar nutritional composition to commercial hemp protein products, with heavy metal levels within FDA allowed limits. The by-product had significantly higher CBDA levels than commercial products. Overall, hemp flakes had comparable nutrient composition and antioxidant capabilities. Based on the protein composition of hemp flakes (31.62 %) versus the highest commercial product (43 %), hemp flakes are an acceptable functional food ingredient.
RESUMO
The increasing presence of plastics in the environment has raised concerns about their potential impact, especially as carriers of heavy metals such as Cd, Ni, and Pb. However, the adsorption mechanism of heavy metals on microplastics remains poorly understood. In this study, we investigated the adsorption behavior of Cd, Ni, and Pb by polystyrene (PS) and polypropylene (PP) microplastics to better comprehend their interaction and potential environmental implications. Our results revealed that equilibrium adsorption of microplastics with different heavy metals was achieved within a 6-h contact time. The FTIR analysis findings, which suggest that physical interactions play a significant role in the adsorption of heavy metals onto microplastics, are further supported by the observed changes in surface morphology after adsorption. We explored the influence of solution pH, contact duration, and initial concentration on the adsorption capacity and found significant effects on the adsorption behavior. To model the adsorption process, we applied Langmuir and Freundlich adsorption isotherm models and observed that the Langmuir model better fit the experimental data. Furthermore, we compared the pseudo-first and pseudo-second-order kinetic models and found that the pseudo-second-order model provided a more accurate description of the adsorption kinetics. Notably, the adsorption percentages varied depending on the type of microplastic and experimental conditions. Overall, this study enhances our understanding of the adsorption mechanism of heavy metals on microplastics and provides valuable insights into their behavior in aquatic environments. These findings have implications for the development of effective strategies for mitigating pollution caused by microplastics and heavy metals in aquatic ecosystems.
RESUMO
Metal contamination in soil poses a significant environmental concern worldwide, necessitating effective remediation strategies such as phytoremediation. The present study investigated the effects of EDTA dosage (1.5 and 3 mmol kg-1) and two Trichoderma species (T. harzianum and T. aureoviride) on copper (Cu) content and growth of maize plants grown in a Cu-contaminated soil, as well as Cu fractionation in the soil. In the absence of EDTA, only inoculation with T. harzianum led to a significant increase in shoot biomass. Combining fungal inoculum with EDTA only yielded a significant increase in shoot biomass when using T. aureoviride at a low EDTA rate, highlighting the interplay between fungal species and EDTA rates on plant growth. Results also indicated that EDTA application increased Cu bioavailability, enhancing Cu dissolution and root (not shoot) Cu concentrations. Conversely, inoculation with both Trichoderma species reduced Cu mobility and bioavailability in soil, thereby decreasing the shoot Cu concentrations of plants. When combined with EDTA, only application of T. harzianum resulted in an enhanced shoot Cu concentration, whereas combined application of T. aureoviride and EDTA did not make a significant change compared to the corresponding control (no fungal inoculation, no EDTA), possibly due to a lower compatibility of the T. aureoviride isolate with EDTA. Our results demonstrated that EDTA application, in both non-inoculated and inoculated treatments, increased Cu availability by facilitating its redistribution and transformation from less plant-available fractions (residual, Fe/Mn oxide-bound, and carbonate-bound) to the more readily plant-available forms (water-soluble and exchangeable fractions). In conclusion, although individual Trichoderma application proved beneficial for phytostabilization by reducing Cu content and mitigating Cu toxicity in plants, the combined application of EDTA and a compatible Trichoderma isolate (here, the T. harzianum isolate) holds promise for enhancing the phytoextraction capacity of plants. Although using maize has the advantage of being a food crop, to optimize phytoextraction, plant species with superior metal tolerance and phytoextraction capabilities should be selected, exceeding those of maize.
Assuntos
Biodegradação Ambiental , Cobre , Ácido Edético , Poluentes do Solo , Trichoderma , Zea mays , Zea mays/metabolismo , Zea mays/microbiologia , Ácido Edético/farmacologia , Poluentes do Solo/metabolismo , Cobre/metabolismo , Trichoderma/metabolismo , Biomassa , Disponibilidade Biológica , Raízes de Plantas/metabolismo , Raízes de Plantas/microbiologia , Brotos de Planta/metabolismoRESUMO
Due to anthropogenic activities such as mining, several agricultural soils are polluted by multiple heavy metals. However, it is still unclear whether multiple heavy metals could affect the distribution of antibiotic resistance genes (ARGs), and how metals affect ARGs. To understand ARGs' distribution in heavy metal-polluted soils, we chose soils contaminated by different types and contents of heavy metals to determine the ARGs' number and abundance through high-throughput quantitative real-time PCR (HT-qPCR) in this study. Additionally, the factors affecting ARGs' distribution, such as soil properties, mobile genetic genes (MGEs), and bacterial communities, were explored. The results demonstrated that the sampled soils were primarily contaminated by Cd, As, Pb, and Zn, and the pollution load index (PLI) values of these metals ranged from 1.3 to 2.7, indicating a low to moderate degree of heavy metal contamination. The number and abundance of ARGs ranged from 44 to 113 and from 2.74 × 107 copies/g to 1.07 × 108 copies/g, respectively. Besides, abundant MGEs in soils, ranging from 1.84 × 106 copies/g to 5.82 × 106 copies/g, were observed. The pathway analysis suggested that MGEs were the most important factor directly affecting ARG abundance (0.89). Notably, heavy metals also affected the ARG abundance. Proteobacteria and Actinobacteria, the main heavy metal tolerant bacteria, were found to be the main hosts of ARGs through network analysis. ARG-carrying pathogens (ACPs) in agricultural soils were found to carry MGEs, indicating a high risk of dissemination. This study provided important information for understanding the ARGs' fate and also the key factors affecting ARGs' spread in multiple heavy metal-contaminated soils.
Assuntos
Agricultura , Genes Bacterianos , Metais Pesados , Microbiologia do Solo , Poluentes do Solo , Poluentes do Solo/análise , Metais Pesados/análise , Resistência Microbiana a Medicamentos/genética , Farmacorresistência Bacteriana/genética , Bactérias/genética , Bactérias/efeitos dos fármacos , Solo/química , Monitoramento Ambiental , Reação em Cadeia da Polimerase em Tempo RealRESUMO
The objective of the present study was to evaluate the mineral and heavy metals composition of different seaweeds growing in Marchica lagoon. To this end, green seaweeds, red seaweeds, and brown seaweeds were collected from three different stations in the Marchica lagoon. The highest concentration of Ca was measured in Centroceras clavulatum (17.12 ± 0.60), K in Caulerpa prolifera (15.17 ± 0.20), Na in Gracilaria dura (4.16 ± 0.03) and Hypnea musciformis (4.09 ± 0.03), Mg in Ulva rigida (2.80 ± 0.06), and the highest concentration of P was registered in Ulva intestinalis (3658 ± 14). Centroceras clavulatum and Gracilaria dura had the highest Al, Fe, and Sr levels. Cystoseira compressa had the highest As (53.8 mg/kg) and Rb (43 mg/kg). These findings suggest that seaweeds collected from Marchica lagoon could be used as potential sources of minerals and trace elements in seaweed-based products for human and animal nutrition alike.
Assuntos
Monitoramento Ambiental , Minerais , Alga Marinha , Oligoelementos , Alga Marinha/química , Oligoelementos/análise , Marrocos , Minerais/análise , Metais Pesados/análise , Poluentes Químicos da Água/análise , Mar Mediterrâneo , Ulva/químicaRESUMO
Oral squamous cell carcinoma (OSCC) is a serious public health problem in various Asian countries, including Sri Lanka, and a combination of cultural practices, lifestyle factors, and genetic predispositions influences the incidence of these cancers. The examination of the connection between exposure to heavy metals and the probability of developing oral potentially malignant disorders (OPMD) and OSCC has been limited in its scope, and the overall consequences of such exposure remain largely unknown. This study aims to clarify the link between serum levels of heavy metals and the risk of OSCC and OPMD. The concentrations of seven heavy metals-namely, arsenic (As), cadmium (Cd), chromium (Cr), cobalt (Co), copper (Cu), lead (Pb), and zinc (Zn)-were analyzed in serum samples from 60 cases and 15 controls in the Sri Lankan cohort. The Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES) was used for the analysis. Subsequently, the data underwent statistical evaluation via the Kruskal-Wallis H test, using the Statistical Package for Social Sciences (SPSS) version 28 software, with a confidence interval set at 95%. A p-value less than 0.05 was considered statistically significant. The cohort consisted of 48 men and 27 women, with 15 patients each diagnosed with OSCC, OSF, OLK, and OLP, and 15 healthy controls. The study used the Kruskal-Wallis Test to compare metal concentrations across groups, finding significant differences for all metals except As and Pb. Significant associations were observed between age, past medical history, drug history, gender, smoking, alcohol consumption, and betel chewing. The Spearman Correlation test showed significant correlations between the concentrations of Cr, Co, Cu, As, and Zn and the presence of cancer/precancer conditions. The study's findings suggest that heavy metal contamination may be linked to the development of OSCC and precancerous conditions. When comparing OSCC and OPMD cases with controls, the serum concentrations of As and Pb did not differ significantly. However, Cd, Cr, Co, Cu, and Zn exhibited significantly higher concentrations among cases compared to controls (p < 0.05). This study observed significant variations in the levels of these five heavy metals among cancerous (OSCC), premalignant (OPMD), and healthy tissues, suggesting a potential role in the progression of malignancies. These findings underscore the importance of environmental pollution in this specific context.
Assuntos
Carcinoma de Células Escamosas , Metais Pesados , Neoplasias Bucais , Humanos , Masculino , Feminino , Metais Pesados/sangue , Metais Pesados/efeitos adversos , Neoplasias Bucais/sangue , Neoplasias Bucais/etiologia , Neoplasias Bucais/epidemiologia , Neoplasias Bucais/induzido quimicamente , Pessoa de Meia-Idade , Carcinoma de Células Escamosas/sangue , Carcinoma de Células Escamosas/induzido quimicamente , Carcinoma de Células Escamosas/epidemiologia , Carcinoma de Células Escamosas/etiologia , Adulto , Sri Lanka/epidemiologia , Idoso , Estudos de Casos e Controles , Fatores de Risco , Carcinoma de Células Escamosas de Cabeça e Pescoço/sangue , Carcinoma de Células Escamosas de Cabeça e Pescoço/induzido quimicamente , Carcinoma de Células Escamosas de Cabeça e Pescoço/epidemiologia , Arsênio/sangue , Arsênio/efeitos adversosRESUMO
The use of sewage sludge as a soil improver has been promoted in agroecosystems. However, sludges can contain toxic trace elements because of suboptimal wastewater treatment. Nonetheless, field studies investigating the negative effects of these practices on pollinators are lacking. We collected honeybees from an area where sewage sludge use is widespread, and one where it is precluded. Trace elements in soils and bees were quantified. Cadmium, chromium, lead, mercury, and nickel were investigated because they were the least correlated elements to each other and are known to be toxic. Their levels were related to oxidative stress and energy biomarkers, midgut epithelial health, body size and wing asymmetry of honeybees. We found increased carbohydrate content in sites with higher cadmium levels, increased histological damage to the midgut epithelium in the sewage sludge area, and the presence of dark spherites in the epithelium of bees collected from the sites with the highest lead levels. Finally, we found that honeybees with the highest lead content were smaller, and that wing fluctuating asymmetry increased in sites with increasing levels of mercury. To the best of our knowledge, this is the first comprehensive study of the concentration and effects on honeybees of trace elements potentially deriving from soil amendment practices.
RESUMO
Oil spills from pipeline accidents can result in long-lasting health effect in the people living in a polluted region . In this study, the level of the 16 US EPA priority polycyclic aromatic hydrocarbons (PAHs ) and heavy metals (HMs) have been analyzed in environmental matrices of a region with frequent oil pipeline accidents in Iran . The results showed that the mean concentration of ΣPAHs and ΣHMs decreased from the upstream to the downstream and also the levels were higher in the wet season than those in the dry season. The average concentration of HMs in sediments was higher than that in other environments. The 3-ring and 4-ring PAHs were dominant in all of the studied matrices with the average values of 32.61 % and 45.85 %, respectively. The ecological risks of PAHs and HMs were medium and high in all matrices, respectively. In wet season, the total cancer risk (TCR) related to PAHs in agricultural soil was greater than 10-4, whereas it's very close to the threshold for HMs in water. This study offers a reference for assessing the long-term impact of oil spills in contaminated environmental matrices. The results are crucial for developing effective strategies to mitigate oil pollution impacts and protect environmental and public health.
RESUMO
Livestock and poultry meat consumption play an important role in the dietary structure of Chinese residents. However, the extent of residues of veterinary drugs and heavy metal contamination in livestock and poultry meat and their by-products within Hunan province is not extensively studied. This survey aimed to fill this gap by assessing the presence of 76 veterinary drug residues in Hunan province. Additionally, heavy metals in pork and pig liver were also assessed. The obtained findings suggest that residues of veterinary drugs are still present in livestock and poultry meat, as well as their by-products, within Hunan province. However, the contamination of heavy metals remained within the food safety limits. These results underscore the significance of establishing more refined criteria for assessing human exposure, taking into account factors such as consumption patterns, product varieties and chemical compounds of interest.
RESUMO
Livestock wastewater (LWW) has a complex characteristic of high organic matter content, metals, nutrients, and pharmaceutical compounds. Advanced oxidation processes (AOP) are a potential option for treating this wastewater. This study evaluated real LWW and the performance of UV/H2O2 and UV/peroxymonosulfate (UV/PMS) for its treatment. The experiments were conducted in a UV photoreactor (16 mW/m2, λ = 254 nm). The oxidant agents (Ox) tested were H2O2 and PMS, each at low, medium, and high TOC/Ox molar ratios. A pretreatment based on chemical precipitation was implemented. Annually, the LWW showed total organic carbon (TOC) values of 859 ± 13.37 mg/L, 168.85 ± 1.62 mg/L of total Kjeldahl nitrogen (TKN), and toxicity of 96% v/v. In the dry season, albendazole (ABZ) (95.3 ± 35.16 mg/L), Cu (4.3 ± 0.23 mg/L), Fe (3.8 ± 0.38 mg/L), and suspended solids (SS) (1015 ± 586.9 mg/L) were identified, so pretreatment was implemented. The UV/PMS process with the lowest molar ratio [TOC/Ox 1:0.75] removed significantly lower TOC concentrations (p < 0.05), but toxicity decreased entirely. The study of mineralization and toxicity provided insight into the changes in LWW during treatment with AOP. Furthermore, it contributed to establishing the technical basis for implementing efficient treatment processes.
RESUMO
The growth in municipal solid waste incineration (MSWI) has resulted in a substantial rise in the production of fly ash in China. It is anticipated that during the "14th Five-Year Plan", the accumulated amount of fly ash stocked and disposed of at landfills will surpass 100 million tons. With the development of the economy and the implementation of garbage classification relevant policies, the pollution characteristics of heavy metal change in spatiotemporal distribution. Solidification/stabilization (S/S) pre-treatment coupled with landfill disposal is the mainstream method for fly ash. This study provides a systematic overview and comparison of the current application status and research on the mechanism of S/S technology, and the long-term stability of solidified/stabilized fly ash is a crucial factor in controlling the risks of landfills. Subsequently, it examines the influencing factors and mechanisms associated with heavy metals leaching under different environmental scenarios (meteorological factors, leachate and acid rain erosion, and carbonation, etc.), and concludes that single stabilization technology is difficult to meet long-term landfill requirements. Finally, the limits of heavy metal leaching toxicity evaluation methods and landfilled fly ash supervision were discussed, and relevant suggestions for future development were proposed. This study can provide theoretical instruction and technical support for the risk control of potential environmental risks of heavy metals in solidified/stabilized fly ash from landfills in China.
RESUMO
The presence of heavy metals in food products may seem an archaic concern; however, our study reveals that the risk is significant, unexpectedly in Food for Special Medical Purposes (FSMP) for oncology patients available in Polish pharmacies. This investigation fills that gap through a detailed toxicological analysis and health risk assessment of these heavy metals in FSMP products (n = 23) using inductively coupled plasma mass spectrometry (ICP-MS). Our comprehensive risk assessment involved evaluating (1) the concentrations of As, Cd, Hg, and Pb in both liquid and powdered FSMP formulations, (2) the amount of heavy metals ingested per serving as specified by the manufacturer, and (3) the cumulative daily and weekly intake adjusted for body weight, benchmarked against the provisional tolerable weekly intake (PTWI). While most samples were below PTWI limits, Cd levels raised concerns due to potential cumulative exposure risks, particularly for oncology patients consuming these products regularly. This study underscores the hidden dangers of heavy metal contamination in FSMP, emphasizing the need for vigilant monitoring and stringent regulatory frameworks to ensure patient safety. By uncovering these latent risks through meticulous toxicological assessment, our research provides crucial insights that could safeguard vulnerable populations. This study is significant due to concerns related to the complex risk assessment of FSMP for cancer patients, considering the complexity of oncological diseases and other comorbid factors, as well as the verification of available legal and regulatory acts of FSMP at the European Community level.
RESUMO
The levels of soils pollutants such as lead (Pb) and cadmium (Cd) have significantly increased recently resulting in ecological disturbances and threatening crop production. Various amendments have been employed to enhance the tolerance of crops to withstand Cd and Pb stresses. However, the role of combined application of potassium (K) and of salicylic acid (SA) for Cd and Pb stress mitigation and phytoremediation by quinoa (Chenopodium quinoa Willd) has not been comprehended well. In the present study, the effect of 10 mM K and 0.1 mM SA was tested on the quinoa plants subjected to 250 µM Pb and/or 100 µM Cd. The Pb and Cd treatments were applied separately or together. Phytotoxicity induced by Pb and Cd resulted in drastic decrease (>60%) in chlorophyll contents, stomatal conductance, and plant biomass. The collective treatment of Pb and Cd induced an increase in the concentration of hydrogen peroxide (13-fold) and lipid peroxidation (16-fold) that resulted in a 61% reduction in membrane stability. The application of 10 mM K and/or 0.1 mM SA was remarkable in mitigating the adverse effect of Pb and Cd. The reduction in plant biomass was 17% when 10 mM K and 0.1 mM SA were applied together under the combined treatment of both the metals. The simultaneous application of K and SA effectively mitigated oxidative stress by enhancing the activities of superoxide dismutase, peroxidase, ascorbate peroxidase, and catalase by 12, 10, 7 and 10-folds respectively. The positive effect of K and SA on these attributes resulted in a remarkable reduction in metal accumulation and translocation and lipid peroxidation. The stressed plants supplemented with K and SA exhibited a significant improvement in the membrane stability index, chlorophyll content, and stomatal conductance. This study concluded that the combined application of K and SA could be a good approach for reducing Pb and Cd phytotoxicity in quinoa and enhancing their phytostabilization potential in the contaminated soils.
RESUMO
In this study, the concentrations of cadmium (Cd), iron (Fe), manganese (Mn), nickel (Ni), lead (Pb) and zinc (Zn) in plants sampled from Mt. Madra were investigated. Furthermore, the distribution characteristics and source identification of potentially toxic metals were investigated with the application of Positive Matrix Factorization (PMF) modelling. Samples of 26 different plant species were taken from Mt. Madra at elevations ranging from 177 to 1347 m using the multi-point sampling approach. The metal quantities measured by ICP-OES are the following sequences (mean ± SD) (mg/kg): Fe (974.96 ± 29.6) > Mn (111.81 ± 2.6) > Zn (27.28 ± 0.2) > Ni (2.17 ± 0.03) > Pb (0.77 ± 0.01) > Cd (0.12 ± 0.01). According to the plant samples in which the highest values were determined, the metals are as follows: Cd (Lathyrus laxiflorus, 0.401 mg/kg), Fe (Ajuga orientalis, 7621.207 mg/kg), Mn (Castanea sativa, 724.927 mg/kg), Ni (Prunella laciniata, 6.947 mg/kg), Pb (Crataegus stevenii, 3.955 mg/kg) and Zn (Prunella laciniata, 50.802 mg/kg). The results of the PMF model showed that Cd had an atmospheric transport factor originated and transported from industrial activites, Ni had a substrate factor, Fe, Mn, Pb and Zn were influenced by different anthropogenic factors.