RESUMO
High-entropy alloys (HEAs) present both significant potential and challenges for developing efficient electrocatalysts due to their diverse combinations and compositions. Here, we propose a procedural approach that combines high-throughput experimentation with data-driven strategies to accelerate the discovery of efficient HEA electrocatalysts for the hydrogen evolution reaction (HER). This enables the rapid preparation of HEA arrays with various element combinations and composition ratios within a model system. The intrinsic activity of the HEA arrays is swiftly screened using scanning electrochemical cell microscopy (SECCM), providing precise composition-activity data sets for the HEA system. An ensemble machine learning (EML) model is then used to predict the activity database for the composition subspace of the system. Based on these database results, two groups of promising catalysts are recommended and validated through actual electrocatalytic evaluations. This procedural approach, which combines high-throughput experimentation with data-driven strategies, provides a new pathway to accelerate the discovery of efficient HEA electrocatalysts.
RESUMO
The development of electrocatalysts with low cost, high efficiency, and long-term durability is crucial for advancing green hydrogen production. Transition metal phosphides (TMPs) have been proved to be efficient electrocatalyst, while the improvement in the performance and durability of the TMPs remains a big challenge. Employing atmospheric pressure chemical vapor deposition (APCVD) and phosphorization, FeP/Ti electrodes are fabricated featuring controllable oxygen ingredients (O-FeP/Ti). This manipulation of oxygen content fine-tunes the electronic structure of the catalyst, resulting in improved surface reaction kinetics and catalytic activity. The optimized O-FeP-400/Ti exhibits outstanding HER activity with overpotentials of 142 and 159 mV at -10 mA cm-2 in 0.5 M H2SO4 and 1 M KOH, respectively. Notably, the obtained O-FeP/Ti cathode also displays remarkable durability of up to 200 h in acidic electrolyte with surface topography remaining intact. For the first time, the low-valence titanium oxide (Ti3O) interlayer is identified in the composite electrode and ascribed for the superior connection between Ti substrate and the surface O-FeP catalyst, as supported by experimental results and density functional theory (DFT) analysis. This work has expanded the potential applications of transition metal phosphides (TMPs) as a cost-effective, highly efficient and durable catalyst for water splitting.
RESUMO
The adhesion of H2 bubbles on the electrode surface is one of the main factors limiting the performance of H2 evolution of electrolytic water, especially at high current density. To overcome this problem, here a "quasi-gas phase" electrolytic water reaction system based on capillary effect is proposed for the first time to improve the mass transfer efficiency of H2. The typical feature of this reaction system is that the main site of H2 evolution reaction is transferred from the bulk aqueous solution to the gas phase environment above the bulk aqueous solution, thus effectively inhibiting the aggregation of H2 bubbles and reducing the resistance of their diffusion away. Electrochemical test results show that the proposed quasi-gas phase system can significantly reduce the potential required in H2 evolution reaction process at high current density compared with the conventional electrolytic reaction system. Specifically, the overpotential potential is reduced by 0.31 V when the H2 evolution current density of 250 mA cm-2 is achieved.
RESUMO
Integrating electrochemical upcycling of polyethylene-terephthalate (PET) and the hydrogen evolution reaction (HER) is an energy-saving approach for electrolytic hydrogen (H2) production, along with the coproduction of formate. Herein, a novel and rapid strategy of cold plasma phosphating is employed to synthesize Co2P-Ni2P heterointerface decorated on carbon cloth (Co2P-Ni2P/CC) to catalyze H2 generation and reform PET. Notably, the obtained Co2P-Ni2P/CC exhibits eminent ethylene glycol oxidation reaction (EGOR) and HER activities, effectuating low potentials of merely 1.300 and -0.112 V versus RHE at 100 mA cm-2 for the EGOR and HER, respectively, also attaining an ultralow cell bias of 1.300 V at 10 mA cm-2 for EG oxidation assisted-water splitting. DFT and characterization results validate that the as-formed built-in electric fields in the Co2P-Ni2P heterointerface can accelerate electrons transfer and deepen structural self-reconstruction, thereby boosting effectively water dissociation and ethylene glycol (EG) dehydrogenation. Impressively, coupling HER with PET-derived EG-to-formate in a flow-cell electrolyzer assembled with Co2P-Ni2P/CC pair achieves an intriguing formate Faradaic efficiency of 90.6% and an extraordinary stable operation of over 70 h at 100 mA cm-2. The work exemplifies a facile and effective strategy for synthesizing metal phosphides electrocatalysts with extraordinary performance toward H2 generation of water splitting and recycling of PET.
RESUMO
The ethylene glycol oxidation reaction (EGOR) has attracted attention because ethylene glycol (EG), which exhibits large-scale production and a low market price, can be reformed into valuable glycolic acid (GCA) with the cogeneration of high-purity hydrogen gas during the reaction. In this study, a noble catalyst material of Pt nanoparticles supported on Se-doped porous carbon (Pt/SePC) is prepared and investigated for the selective electrochemical oxidation of EG to GCA. Pt/SePC achieved a maximum EG conversion of 94.6% and GCA selectivity of 84.4% and maintained this high performance with negligible degradation during durability tests. Furthermore, the EGOR required lower overpotential rather than the oxygen evolution reaction, thus the EGOR coupled with the hydrogen evolution reaction can reduce the cell overpotential to 0.60 V, which is much lower than that of water electrolysis (1.58 V). The effect of Se doping is investigated through experimental analyses and density functional theory (DFT) calculations, and they shows that Se modified the binding energy of Pt nanoparticles and the adsorption energy of reactants by lattice deformation and charge density modification. This study provides scientific insights and strategies for electrocatalyst design for the selective oxidation of polyols to value-added chemicals via the cogeneration of hydrogen gas.
RESUMO
Transition metal dichalcogenides (TMDs) have received considerable attention as promising electrocatalysts for the hydrogen evolution reaction (HER), yet their potential is often constrained by the inertness of the basal planes arising from their poor hydrogen adsorption ability. Here, the relationship between the electronic structure of the WS2 basal plane and HER activity is systemically analyzed to establish a clear insight. The valance state of the sulfur atoms on the basal plane has been tuned to enhance hydrogen adsorption through sequential engineering processes, including direct phase transition and heterostructure that induces work function-difference-induced unidirectional electron transfer. Additionally, an innovative synthetic approach, harnessing the built-in internal polarization field at the W-graphene heterointerface, triggers the in-situ formation of sulfur vacancies in the bottom WSx (x < 2) layers. The resultant modulation of the valance state of the sulfur atom stabilizes the W-S bond, while destabilizing the S-H bond. The electronic structural changes are further amplified by the release and transfer of surplus electrons via sulfur vacancies, filling the valance state of W and S atoms. Consequently, this work provides a comprehensive understanding of the interplay between the electronic structure of the WS2 basal plane and the HER activity, focusing on optimizing S-H bonding state.
RESUMO
Metal clusters, due to their small dimensions, contain a high proportion of surface atoms, thus possessing a significantly improved catalytic activity compared with their bulk counterparts and nanoparticles. Defective and modified carbon supports are effective in stabilizing metal clusters, however, the synthesis of isolated metal clusters still requires multiple steps and harsh conditions. Herein, we develop a C60 fullerene-driven spontaneous metal deposition process, where C60 serves as both a reductant and an anchor, to achieve uniform metal (Rh, Ir, Pt, Pd, Au and Ru) clusters without the need for any defects or functional groups on C60. Density functional theory calculations reveal that C60 possesses multiple strong metal adsorption sites, which favors stable and uniform deposition of metal atoms. In addition, owing to the electron-withdrawing properties of C60, the electronic structures of metal clusters are effectively regulated, not only optimizing the adsorption behavior of reaction intermediates but also accelerating the kinetics of hydrogen evolution reaction. The synthesized Ru/C60-300 exhibits remarkable performance for hydrogen evolution in an alkaline condition. This study demonstrates a facile and efficient method for synthesizing effective fullerene-supported metal cluster catalysts without any pretreatment and additional reducing agent.
RESUMO
π frameworks, defined as a type of porous supramolecular materials weaved from conjugated molecular units by π-π stacking interactions, provide a new direction in photocatalysis. However, such examples are rarely reported. Herein, we report a supramolecular-nanocage-based π framework constructed from a photoactive Cu(I) complex unit. Structurally, 24 Cu(I) complex units stack together through π-π stacking interactions, forming a truncated octahedral nanocage with sodalite topology. The inner diameter of the nanocage is 2.8 nm. By sharing four open faces, each nanocage connects with four equivalent ones, forming a 3D porous π framework (π-2). π-2 shows good thermal and chemical stability, which can adsorb CO2, iodine, and methyl orange molecules. More importantly, π-2 can serve as a photocatalyst for hydrogen evolution reaction. With ultrafine Pt subnanometer particles (0.9±0.1 nm) incorporated into the nanocages as a co-catalyst, the hydrogen evolution rate reaches a record-high value of 517551 µmol/gPt/h in the absence of any additional photosensitizers. The high photocatalytic activity can be ascribed to the ultrafine size of the Pt particles, as well as the fast electron transfer from π-2 to the highly active Pt upon illumination. π-2 represents the unique stable supramolecular-cage-based π framework with excellent photocatalytic activity.
RESUMO
Thickness control of two-dimensional (2D) metal nanosheets (metallenes) has scientific significance for energy and catalyst applications, yet is unexplored owing to the lack of an efficient approach for the tailored synthesis of metallenes with controlled atomic layers. Here we report a 2D template-directed synthesis of ultrathin Pd nanosheets with well-controlled thicknesses. Molecularly thin single-crystalline Pd nanosheets with well-defined hexagonal morphologies were synthesized via a one-pot method with 2,4,6-trichlorophenyl formate. Such Pd nanosheets were used as hard templates for the tailored synthesis of the Pd nanosheets with controlled thicknesses (9, 11, 13, and 15 atomic layers). Hard X-ray photoelectron spectroscopy and density functional theory calculations revealed unique electronic states in thickness-controlled Pd nanosheets; these states included reduced surface charges to bulk, increased work functions, and decreased d-band centers. Thus, atomic layer engineering of Pd nanosheets enabled the fine-tuning of the surface electronic states to improve the hydrogen evolution reaction.
RESUMO
Designing inexpensive, high-efficiency and durable bifunctional catalysts for urea oxidation reaction (UOR) and hydrogen evolution reaction (HER) is an encouraging tactic to produce hydrogen with reduced energy expenditure. Herein, oxygen vacancy-rich cobalt hydroxide/aluminum oxyhydroxide heterostructure on nickel foam (denoted as Co(OH)2/AlOOH/NF-100) has been fabricated using one step hydrothermal process. Theoretical calculation and experimental results indicate the electrons transfer from Co(OH)2 to highly active AlOOH results in the interfacial charge redistribution and optimization of electronic structure. Abundant oxygen vacancies in the heterostructure could improve the conductivity and simultaneously serve as the active sites for catalytic reaction. Consequently, the optimal Co(OH)2/AlOOH/NF-100 demonstrates excellent electrocatalytic performance for HER (62.9 mV@10 mA cm-2) and UOR (1.36 V@10 mA cm-2) due to the synergy between heterointerface and oxygen vacancies. Additionally, the in situ electrochemical impedance spectrum (EIS) for UOR suggests that the heterostructured catalyst exhibits rapid reaction kinetics, mass transfer and current response. Importantly, the urea-assisted electrolysis composed of the Co(OH)2/AlOOH/NF-100 manifests a low cell voltage (1.48 V @ 10 mA cm-2) in 1 M KOH containing 0.5 M urea. This work presents a promising avenue to the development of HER/UOR bifunctional electrocatalysts.
RESUMO
As a Pt-group element, Pd has been regarded as one of the alternatives to Pt-based catalysts for the hydrogen evolution reaction (HER). Herein, we performed density functional theory (DFT) computations to explore the most stable structures of PdxBy (x = 6, 19, 44), revealed the in situ structural reconstruction of these clusters under acidic conditions, and evaluated their HER activity. We found that the presence of B can prevent underpotential hydrogen adsorption and activate the H atoms on the cluster surface for the HER. The theoretical calculations show that the reaction barrier for the HER on ~1 nm sized Pd44B4 can be as low as 0.36 eV, which is even lower than for the same-sized Pt and Pd2B nanoparticles. The ultra-high HER activity of sub-nanosized PdxBy clusters makes them a potential new and efficient HER electro-catalyst. This study provides new ideas for evaluating and designing novel nanocatalysts based on the structural reconstruction of small-sized nanoparticles in the future.
RESUMO
The single atom catalysts (SACs) show immense promise as catalytic materials. By doping the single atoms (SAs) of precious metals onto substrates, the atomic utilization of these metals can be maximized, thereby reducing catalyst costs. The electronic structure of precious metal SAs is significantly influenced by compositions of doped substrates. Therefore, optimizing the electronic structure through appropriate doping of substrates can further enhance catalytic activity. Here, Pt single atoms (Pt SAs) are doped onto transition metal sulfide substrate NiS2 (Pt SAs-NiS2) and phosphide substrate Ni2P (Pt SAs-Ni2P) to design and prepare catalysts. Compared to the Pt SAs-NiS2 catalyst, the Pt SAs-Ni2P catalyst exhibits better hydrogen evolution catalytic performance and stability. Under 1 M KOH conditions, the hydrogen evolution mass activity current density of the Pt SAs-Ni2P catalyst reaches 0.225 A mgPt-1 at 50 mV, which is 33 times higher than that of commercial Pt/C catalysts. It requires only 44.9 mV to achieve a current density of 10 mA cm-2. In contrast, for the Pt SAs-NiS2 catalyst, the hydrogen evolution mass activity current density is 0.178 A mgPt-1, requiring 77.8 mV to achieve a current density of 10 mA cm-2. Theoretical calculations indicate that in Pt SAs-Ni2P, the interaction between Pt SAs and the Ni2P substrate causes the Pt d-band center to shift downward, enhancing the H2O desorption and providing optimal H binding sites. Additionally, the hollow octahedral morphology of Ni2P provides a larger surface area, exposing more reactive sites and improving reaction kinetics. This study presents an effective pathway for preparing high-performance hydrogen evolution electrocatalysts by selecting appropriate doped substrates to control the electronic structure of Pt SAs.
RESUMO
While great efforts have been made to improve the electrocatalytic activity of existing materials toward hydrogen evolution reaction (HER), it is also importance for searching new type of nonprecious HER catalysts to realize the practical hydrogen evolution. Herein, we firstly report nanocrystalline transition metal tetraborides (TMB4, TM=W and Mo) as an efficient HER electrocatalyst has been synthesized by a single-step solid-state reaction. The optimized nanocrystalline WB4 exhibits an overpotential as low as 172 mV at 10 mA/cm2 and small Tafel slope of 63 mV/dec in 0.5 M H2SO4. Moreover, the nanocrystalline WB4 outperforms the commercial Pt/C at high current density region, confirming potential applications in industrially electrochemical water splitting. Theoretical study reveals that high intrinsic HER activity of WB4 is originated from its large work function that contributes to the weak hydrogen-adsorption energy. Therefore, this work provides new insights for development of robust nanocrystalline electrocatalysts for efficient HER.
RESUMO
Electrochemical water splitting for hydrogen production is an ideal process for clean energy production. However, highly active and low-cost electrocatalysts are essential and challenging. In this work, a multi-component Cu-based catalyst (Ru-M-C-Cu), synergized with ruthenium (Ru) heteroatom doping, was synthesized via a facile immersion-calcination-immersion method. Based on the cotton biomass substrate, a hollow tubular structure was obtained. By virtue of its distinctive structure and high carbon content, cotton biomass assumed a dual role as a sacrificial template and a reducing agent in the eco-friendly synthesis of electrocatalysts, which was instrumental in the creation of a multi-component system augmented by heteroatom doping. The multi-component system was constructed by in-situ transformation and redox reaction during calcination in an oxygen-free environment. The Ru-M-C-Cu catalyst exhibited a competitive overpotential of 108 mV at a current density of 10 mA cm-2 for alkaline hydrogen evolution reaction (HER). The satisfactory catalytic performance of Ru-M-C-Cu can be attributed to the fact that the Ru-O-Cu catalytic centers enhanced the adsorption and desorption abilities of the Cu-O active sites toward hydrogen. Furthermore, the hollow tubular structure allowed the electrolyte to make full contact with the active sites of the Ru-M-C-Cu catalyst, thus accelerated the HER kinetics. The catalyst showed structural and chemical stability after a 12-hour successive test. Besides, the production cost of Ru-M-C-Cu was significantly reduced by 99.1 % than that of commercial 20 % Pt/C, showing the potential as an alternative catalyst by offering a more accessible and sustainable source. This work provides a new design of sustainable low-budget electrocatalysts with the proposed strategies expected for producing clean and renewable hydrogen energy.
RESUMO
Electrochemical nitrate (NO3-) reduction reaction (NO3-RR) to ammonium (NH4+) or nitrogen (N2) provides a green route for nitrate remediation. However, nitrite generation and hydrogen evolution reactions hinder the feasibility of the process. Herein, dual single atom catalysts were rationally designed by introducing Ag/Bi/Mo atoms to atomically dispersed NiNC moieties supported by nitrogen-doped carbon nanosheet (NCNS) for the NO3-RR. Ni single atoms loaded on NCNS (Ni/NCNS) tend to reduce NO3- to valuable NH4+ with a high selectivity of 77.8 %. In contrast, the main product of NO3-RR catalyzing by NiAg/NCNS, NiBi/NCNS, and NiMo/NCNS was changed to N2, giving rise to N2 selectivity of 48.4, 47.1 and 47.5 %, respectively. Encouragingly, Ni/NCNS, NiBi/NCNS, and NiAg/NCNS showed excellent durability in acidic electrolytes, leading to nitrate conversion rates of 70.3, 91.1, and 93.2 % after a 10-h reaction. Simulated wastewater experiments showed that NiAg/NCNS could remove NO3- up to 97.8 % at -0.62 V after 9-h electrolysis. This work afforded a new strategy to regulate the reaction pathway and improve the conversion efficiency of the NO3-RR via engineering the dual atomic sites of the catalysts.
RESUMO
Finding the best candidates with outstanding electrocatalytic capabilities for the hydrogen evolution reaction is essential for realizing large-scale hydrogen production through electrolysis. In this study, we synthesized NiCo2Se4 (NCS) and NiTe2 (NT) nanorod arrays using a hydrothermal method. The confirmation of catalyst formation was achieved through X-ray diffraction analysis, electron microscopy imaging, and X-ray photoelectron spectroscopy. Leveraging the plentiful heterointerfaces and synergistic effects arising from the incorporation of bimetallic components, the NCS/NT electrocatalyst demonstrates remarkable efficacy in catalyzing the hydrogen evolution reaction. It achieves a minimal overpotential of 163 mV to attain a current density of 50 mA cm-2, showcasing exceptional catalytic activity. Further exploration has revealed that the engineering of heterogeneous interfaces and the morphology of nanorods not only guarantee the exposure of numerous active sites and expedite electron-mass transfer but also trigger electron modulation. Such modulation serves to fine-tune the adsorptive and adsorptive dynamics of reaction intermediates, culminating in an enhancement of the catalyst's inherent activity. This study illuminates the novel composite electrocatalyst with robust synergy, highlighting the pivotal role of their unique nanostructures in achieving high-efficiency hydrogen production via electrolysis.
RESUMO
Herein, a heterogeneous structure of Ni-Mo catalyst comprising Ni4Mo nanoalloys decorated on a MoOx matrix via electrodeposition is introduced. This catalyst exhibits remarkable hydrogen evolution reaction (HER) activity across a range of pH conditions. The heterogeneous Ni-Mo catalyst showed low overpotentials only of 24 and 86, 21 and 60, and 37 and 168 mV to produce a current density of 10 and 100 mA cm-2 (η10 and η100) in alkaline, acidic, and neutral media, respectively, which represents one of the most active catalysts for the HER. The enhanced activity is attributed to the hydrogen spillover effect, where hydrogen atoms migrate between the Ni4Mo alloys and the MoOx matrix, forming hydrogen molybdenum bronze as additional active sites. Additionally, the Ni4Mo facilitated the water dissociation process, which helps the Volmer step in the alkaline/neutral HER. Through electrochemical analysis, in situ Raman spectroscopy, and density functional theory calculations, the fast HER mechanism is elucidated.
RESUMO
Metal-doping is a common strategy for establishing active sites on photocatalyst, but appropriately exposing them for maximized atomic utilization remains a great challenge in photocatalytic research. Herein, we propose a metal organic framework (MOF)-assisted approach to synthesis copper-modified titania (Cu-TiO2/Cu) photocatalyst with homogenously distributed and highly accessible active sites in its matrix. Significantly, an MOF precursor, namely NH2-MIL-125, with co-chelation of titania (Ti) and copper (Cu) was subjected to mild calcination, subsequently results in Cu-modified TiO2 with highly accessible channels to its inner surface. These channels provide not only a large reactive surface (>400 m2 g-1); they also enable facile modifying route for the pre-deposited Cu in prior to photoreaction. Specifically, NH3 treatment was applied to partially reduce deposited Cu ions (Cu+ and Cu2+) into Cu nanoparticles, where their interplays realize improved optical properties and charge separation during photoreactions. Furthermore, the NH3-induced Cu nanoparticles could also serve as the adsorptive site for H+, thereby enabling 5629 µmol h-1 g-1 H2 generation over the optimum photocatalyst of Cu20/TiO2/Cu500. Such performance is associated to 35.44 and 1.71-fold improvements compared to pure TiO2 (Cu0/TiO2) and untreated Cu-ion modified TiO2 (Cu20/TiO2), respectively. This work offers a new synthetic strategy for obtaining photocatalyst with evenly distributed and highly accessible active sites, thus improving the commensurability of photocatalytic H2 generation from the industrial perspective.
RESUMO
The sluggish anodic oxygen evolution reaction (OER) seriously restricts the overall efficiency of water splitting. Here, we present an environmentally friendly and efficient aniline oxidation (BOR) to replace the sluggish OER, accomplishing the co-production of H2 and high value-added benzonitrile (BN) at low voltages. Cobalt oxalates grown on cobalt foam (CoC2O4·2H2O/CF) are adopted as the pre-catalysts, which further evolve into working electrocatalysts active for BOR and HER after appropriate electrochemical activation. Thereinto, cyclic voltammetry activation at positive potentials is performed to reconstruct cobalt oxalate via extensive oxidation, resulting in enriched Co(III) species and nanoporous structures beneficial for BOR, while chronoamperometry at negative potentials is introduced for the cathodic activation toward efficient HER with obvious improvement. The two activated electrodes can be combined into a two-electrode system, which achieves a high current density of 75 mA cm-2 at the voltage of 1.95 V, with the high Faraday efficiencies of both BOR (90.0%) and HER (90.0%) and the satisfactory yield of BN (76.8%).
RESUMO
The high electrochemical reactivity of H2O molecules and zinc metal results in severe side reactions and dendrite formation on zinc anodes. Here we demonstrate that these issues can be addressed by using N-hydroxymethylacetamide (NHA) as additives in 2 M ZnSO4 electrolytes. The addition of NHA molecules, acting as both a hydrogen bond donor and acceptor, enables the formation of cyclic hydrogen bonding with H2O molecules. This interaction disrupts the existing hydrogen bonding networks between H2O molecules, hindering proton transport, and containing H2O molecules within the cyclic hydrogen bonding structure to prevent deprotonation. Additionally, NHA molecules show a preference for adsorption on the (101) crystal surface of zinc metal. This preferential adsorption reduces the surface energy of the (101) plane, facilitating the homogeneous Zn deposition along the (101) direction. Thus, the NHA enables Zn||Zn symmetric cell with a cycle lifespan of 1100 hours at 5 mA cm-2 and Zn||Cu asymmetric cell with a high Coulombic efficiency over 99.5%. Moreover, the NHA-modified Zn||AC zinc ion hybrid capacitor is capable of sustaining 15000 cycles at 2 A g-1. This electrolyte additive engineering presents a promising strategy to enhance the performance and broaden the application potential of zinc metal-based energy storage devices.