Effects of 16 weeks of plyometric training on knee biomechanics during the landing phase in athletes.

This study investigated the effects of plyometric training on lower-limb muscle strength and knee biomechanical characteristics during the landing phase. Twenty-four male subjects were recruited for this study with a randomised controlled design. They were randomly divided into a plyometric training group and a traditional training group and underwent training for 16 weeks. Each subject was evaluated every 8 weeks for knee and hip isokinetic muscle strength as well as knee kinematics and kinetics during landing. The results indicated significant group and time interaction effects for knee extension strength (F = 74.942 and p = 0.001), hip extension strength (F = 99.763 and p = 0.000) and hip flexion strength (F = 182.922 and p = 0.000). For landing kinematics, there were significant group main effects for knee flexion angle range (F = 4.429 and p = 0.047), significant time main effects for valgus angle (F = 6.502 and p = 0.011) and significant group and time interaction effects for internal rotation angle range (F = 5.475 and p = 0.008). The group main effect for maximum knee flexion angle was significant (F = 7.534 and p = 0.012), and the group and time interaction effect for maximum internal rotation angle was significant (F = 15.737 and p = 0.001). For landing kinetics, the group main effect of the loading rate was significant (F = 4.576 and p = 0.044). Significant group and time interaction effects were observed for knee extension moment at the moment of maximum vertical ground reaction force (F = 5.095 and p = 0.010) and for abduction moment (F = 8.250 and p = 0.001). These findings suggest that plyometric training leads to greater improvements in hip and knee muscle strength and beneficial changes in knee biomechanics during landing compared to traditional training.

Genomic Determinants of Knee Joint Biomechanics: An Exploration into the Molecular Basis of Locomotor Function, a Narrative Review.

In recent years, the nexus between genetics and biomechanics has garnered significant attention, elucidating the role of genomic determinants in shaping the biomechanical attributes of human joints, specifically the knee. This review seeks to provide a comprehensive exploration of the molecular basis underlying knee joint locomotor function. Leveraging advancements in genomic sequencing, we identified specific genetic markers and polymorphisms tied to key biomechanical features of the knee, such as ligament elasticity, meniscal resilience, and cartilage health. Particular attention was devoted to collagen genes like COL1A1 and COL5A1 and their influence on ligamentous strength and injury susceptibility. We further investigated the genetic underpinnings of knee osteoarthritis onset and progression, as well as the potential for personalized rehabilitation strategies tailored to an individual's genetic profile. We reviewed the impact of genetic factors on knee biomechanics and highlighted the importance of personalized orthopedic interventions. The results hold significant implications for injury prevention, treatment optimization, and the future of regenerative medicine, targeting not only knee joint health but joint health in general.

A novel computational workflow to holistically assess total knee arthroplasty biomechanics identifies subject-specific effects of joint mechanics on implant fixation.

Computational studies of total knee arthroplasty (TKA) often focus on either joint mechanics (kinematics and forces) or implant fixation mechanics. However, such disconnect between joint and fixation mechanics hinders our understanding of overall TKA biomechanical function by preventing identification of key relationships between these two levels of TKA mechanics. We developed a computational workflow to holistically assess TKA biomechanics by integrating musculoskeletal and finite element (FE) models. For our initial study using the workflow, we investigated how tibiofemoral contact mechanics affected the risk of failure due to debonding at the implant-cement interface using the four available subjects from the Grand Challenge Competitions to Predict In Vivo Knee Loads. We used a musculoskeletal model with a 12 degrees-of-freedom knee joint to simulate the stance phase of gait for each subject. The computed tibiofemoral joint forces at each node in contact were direct inputs to FE simulations of the same subjects. We found that the peak risk of failure did not coincide with the peak joint forces or the extreme tibiofemoral contact positions. Moreover, despite the consistency of joint forces across subjects, we observed important variability in the profile of the risk of failure during gait. Thus, by a combined evaluation of the joint and implant fixation mechanics of TKA, we could identify subject-specific effects of joint kinematics and forces on implant fixation that would otherwise have gone unnoticed. We intend to apply our workflow to evaluate the impact of implant alignment and design on TKA biomechanics.

Altered knee kinematics after posterior cruciate ligament single-bundle reconstruction-a comprehensive prospective biomechanical in vivo analysis.

Purpose: Passive tibiofemoral anterior-posterior (AP) laxity has been extensively investigated after posterior cruciate ligament (PCL) single-bundle reconstruction. However, the PCL also plays an important role in providing rotational stability in the knee. Little is known in relation to the effects of PCL single-bundle reconstruction on passive tibiofemoral rotational laxity. Gait biomechanics after PCL reconstruction are even less understood. The aim of this study was a comprehensive prospective biomechanical in vivo analysis of the effect of PCL single-bundle reconstruction on passive tibiofemoral rotational laxity, passive anterior-posterior laxity, and gait pattern. Methods: Eight patients undergoing PCL single-bundle reconstruction (seven male, one female, mean age 35.6 ± 6.6 years, BMI 28.0 ± 3.6 kg/m2) were analyzed preoperatively and 6 months postoperatively. Three of the eight patients received additional posterolateral corner (PLC) reconstruction. Conventional stress radiography was used to evaluate passive translational tibiofemoral laxity. A previously established rotometer device with a C-arm fluoroscope was used to assess passive tibiofemoral rotational laxity. Functional gait analysis was used to examine knee kinematics during level walking. Results: The mean side-to-side difference (SSD) in passive posterior translation was significantly reduced postoperatively (12.1 ± 4.4 mm vs. 4.3 ± 1.8 mm; p < 0.01). A significant reduction in passive tibiofemoral rotational laxity at 90° knee flexion was observed postoperatively (27.8° ± 7.0° vs. 19.9° ± 7.5°; p = 0.02). The range of AP tibiofemoral motion during level walking was significantly reduced in the reconstructed knees when compared to the contralateral knees at 6-month follow-up (16.6 ± 2.4 mm vs. 13.5 ± 1.6 mm; p < 0.01). Conclusion: PCL single-bundle reconstruction with optional PLC reconstruction reduces increased passive tibiofemoral translational and rotational laxity in PCL insufficient knees. However, increased passive tibiofemoral translational laxity could not be fully restored and patients showed altered knee kinematics with a significantly reduced range of tibiofemoral AP translation during level walking at 6-month follow-up. The findings of this study indicate a remaining lack of restoration of biomechanics after PCL single-bundle reconstruction in the active and passive state, which could be a possible cause for joint degeneration after PCL single-bundle reconstruction.

Lower extremity and trunk sagittal plane coordination strategies and kinetic distribution during landing in males and females.

Force attenuation during landing requires coordinated motion of the ankle, knee, hip, and trunk, and strategies may differ between sexes. Sagittal plane coordination of the ankle/knee, knee/hip, and knee/trunk, and lower extremity and trunk kinematics and kinetics was compared throughout landing between 28 males and 28 females. Coordination was assessed with a modified vector coding technique and binning analysis. Total support moments (TSM), each joint's percent contribution, and timing of the TSM were compared. Females landed with less isolated knee flexion in the ankle/knee, knee/hip, and knee/trunk couplings, but more simultaneous ankle/knee flexion, less simultaneous knee flexion/hip extension, and more simultaneous trunk/knee flexion. Females landed with larger plantarflexion angles from 0-16% and smaller trunk flexion angles from 0-78%. In females, absolute TSM were larger from 0-6% and smaller from 42-100%, and normalized TSM were larger from 0-8% and 26-42%. Females had greater ankle contribution to the TSM from 14-15% and 29-35%, smaller absolute peak TSM, and the peak TSM occurred earlier. Females compensated for less isolated knee flexion with greater simultaneous ankle/knee flexion early in landing and knee/trunk flexion later in landing. Coordination and TSM differences may influence force attenuation strategies and have implications for knee injury disparity between sexes.

Relationship Between Knee Frontal Plane Projection Angle and Lower Limb Muscle Activity in Female Athletes.

CONTEXT: Anterior cruciate ligament injuries are directly related to the control of dynamic knee valgus in the landing of a jump, and this is mainly due to the correct activation and neuromuscular function of the lower-extremity muscles. The aim of the study is to assess the relationship between lower limb muscle activity during a single-legged drop jump and knee frontal plane projection angle (FPPA). DESIGN: A correlation study. METHODS: Thirty healthy collegiate female athletes were included in the study. Main outcomes measures were peak knee FPPA and muscle activity (% of maximal voluntary isometric contraction). Peak knee FPPA during a single-legged drop jump test was identified using a 2-dimensional motion analysis system. Muscle activity was assessed using a surface electromyograph for gluteus maximus, gluteus medius, biceps femoris, semitendinosus, vastus medialis quadriceps, vastus lateralis quadriceps, medial gastrocnemius, and lateral gastrocnemius. All variables were assessed for both dominant and nondominant limbs. A correlation analysis between peak knee FPPA and muscle activity was performed. Statistical significance was set at P <.05. RESULTS: A mean peak knee FPPA of 14.52° and 13.38° was identified for dominant and nondominant limb single-legged drop jump test, respectively. Muscle activity (% of maximal voluntary isometric contraction) for muscles assessed ranged from 43.97% to 195.71% during the single-legged drop jump test. The correlation analysis found no significant correlation between any of the muscles assessed and peak knee FPPA during the single-legged drop jump test (Pearson coefficient between -.3 and .1). CONCLUSIONS: There is no association between muscle activity from the lower limb muscles and the knee FPPA during a single-legged drop jump in female athletes. Thus, different muscle properties should be assessed in order to understand such an important movement as the knee FPPA during a jump.

Surgical Management of Traumatic Meniscus Injuries.

The menisci increase the contact area of load bearing in the knee and thus disperse the mechanical stress via their circumferential tensile fibers. Traumatic meniscus injuries cause mechanical symptoms in the knee, and are more prevalent amongst younger, more active patients, compared to degenerative tears amongst the elderly population. Traumatic meniscus tears typically result from the load-and-shear mechanism in the knee joint. The treatment depends on the size, location, and pattern of the tear. For non-repairable tears, partial or total meniscal resection decreases its tensile stress and increases joint contact stress, thus potentiating the risk of arthritis. A longitudinal vertical tear pattern at the peripheral third red-red zone leads to higher healing potential after repair. The postoperative rehabilitation protocols after repair range from immediate weight-bearing with no range of motion restrictions to non-weight bearing and delayed mobilization for weeks. Pediatric and adolescent patients may require special considerations due to their activity levels, or distinct pathologies such as a discoid meniscus. Further biomechanical and biologic evidence is needed to guide surgical management, postoperative rehabilitation protocols, and future technology applications for traumatic meniscus injuries.

Deciphering the "Art" in Modeling and Simulation of the Knee Joint: Assessing Model Calibration Workflows and Outcomes.

Model reproducibility is a point of emphasis for the National Institutes of Health (NIH) and in science, broadly. As the use of computational modeling in biomechanics and orthopedics grows, so does the need to assess the reproducibility of modeling workflows and simulation predictions. The long-term goal of the KneeHub project is to understand the influence of potentially subjective decisions, thus the modeler's "art", on the reproducibility and predictive uncertainty of computational knee joint models. In this paper, we report on the model calibration phase of this project, during which five teams calibrated computational knee joint models of the same specimens from the same specimen-specific joint mechanics dataset. We investigated model calibration approaches and decisions, and compared calibration workflows and model outcomes among the teams. The selection of the calibration targets used in the calibration workflow differed greatly between the teams and was influenced by modeling decisions related to the representation of structures, and considerations for computational cost and implementation of optimization. While calibration improved model performance, differences in the postcalibration ligament properties and predicted kinematics were quantified and discussed in the context of modeling decisions. Even for teams with demonstrated expertise, model calibration is difficult to foresee and plan in detail, and the results of this study underscore the importance of identification and standardization of best practices for data sharing and calibration.

Knee instability caused by altered graft mechanical properties after anterior cruciate ligament reconstruction: the early onset of osteoarthritis?

Anterior cruciate ligament (ACL) rupture is a very common knee joint injury. Torn ACLs are currently reconstructed using tendon autografts. However, half of the patients develop osteoarthritis (OA) within 10 to 14 years postoperatively. Proposedly, this is caused by altered knee kine(ma)tics originating from changes in graft mechanical properties during the in vivo remodeling response. Therefore, the main aim was to use subject-specific finite element knee models and investigate the influence of decreasing graft stiffness and/or increasing graft laxity on knee kine(ma)tics and cartilage loading. In this research, 4 subject-specific knee geometries were used, and the material properties of the ACL were altered to either match currently used grafts or mimic in vivo graft remodeling, i.e., decreasing graft stiffness and/or increasing graft laxity. The results confirm that the in vivo graft remodeling process increases the knee range of motion, up to >300 percent, and relocates the cartilage contact pressures, up to 4.3 mm. The effect of remodeling-induced graft mechanical properties on knee stability exceeded that of graft mechanical properties at the time of surgery. This indicates that altered mechanical properties of ACL grafts, caused by in vivo remodeling, can initiate the early onset of osteoarthritis, as observed in many patients clinically.

Development of a bioreactor for in-vitro compression cycling of tissue engineered meniscal implants.

Injuries to the meniscus are common and can impair physical activities. Bioprinted meniscal tissue offers an attractive alternative to donor tissue for meniscal repair but achieving the strength of native tissue is a challenge. Here we report the development of a tissue engineering bioreactor designed to apply repetitive force which may lead to an increase in the compressive modulus and durability of bioprinted meniscal tissues. The modular bioreactor system is composed of a sterilizable tissue culture vessel together with a dock that applies and measures mechanical force. The culture vessel allows for simultaneous compression cycling of two anatomically sized menisci. Using a hybrid linear actuator with a stepper motor, the dock can apply up to 300 N of force at speeds up to 20 mm/s, corresponding to the upper limits of anatomical force and motion in the knee. An interchangeable 22 N load cell was mated between the culture vessel and the dock to log changes in force. Both the culture vessel and dock are maintained in a standard cell culture incubator to provide heat and CO2, while the dock is powered and controlled externally using a step motor drive and customized software.

Influence of time from injury to surgery on knee biomechanics during walking in patients with anterior cruciate ligament reconstruction.

The pilot study aimed to determine whether the time from injury to surgery influences on postoperative knee biomechanics during walking in patients with anterior cruciate ligament reconstruction (ACLR). Thirty-two patients with unilateral ACLR (early, 10 patients; delayed, 22 patients) and 30 control subjects participated in this study. All examinations for patients with ACLR were performed preoperatively and at 12 months postoperatively and comprised passive knee joint laxity, knee muscle strength, and knee kinematics and kinetics during walking. At both time points, there were no significant differences in passive knee joint laxity and knee muscle strength between the early ACLR and delayed ACLR groups. Preoperatively, both the early ACLR and delayed ACLR patients exhibited significantly reduced knee extension movement from midstance to terminal stance compared to the control subjects. Moreover, the delayed ACLR patients exhibited significantly decreased peak external knee flexion moment compared to the control subjects. At 12 months postoperatively, the early ACLR patients showed significant improvement in knee extension movement from midstance to terminal stance compared to pre-ACLR, while the delayed ACLR patients did not show significant improvement in this knee extension movement. It can be concluded that early ACLR may be more beneficial to improve knee biomechanics during walking.

Design, Kinematics and Gait Analysis, of Prosthetic Knee Joints: A Systematic Review.

The aim of this review article is to appraise the design and functionality of above-knee prosthetic legs. So far, various transfemoral prosthetic legs are found to offer a stable gait to amputees but are limited to laboratories. The commercially available prosthetic legs are not reliable and comfortable enough to satisfy amputees. There is a dire need for creating a powered prosthetic knee joint that could address amputees' requirements. To pinpoint the gap in transfemoral prosthetic legs, prosthetic knee unit model designs, control frameworks, kinematics, and gait evaluations are concentrated. Ambulation exercises, ground-level walking, running, and slope walking are considered to help identify research gaps and areas where existing prostheses can be ameliorated. The results show that above-knee amputees can more effectively manage their issues with the aid of an active prosthesis, capable of reliable gait. To accomplish the necessary control, closed loop controllers and volitional control are integral parts. Future studies should consider designing a transfemoral electromechanical prosthesis based on electromyographic (EMG) signals to better predict the amputee's intent and control in accordance with that intent.

Stress and strain changes of the anterior cruciate ligament at different knee flexion angles: A three-dimensional finite element study.

OBJECTIVE: This study aimed to analyze the stress and strain changes of the anterior cruciate ligament (ACL) at different knee flexion angles using a three-dimensional finite element model. METHODS: Computed tomography and magnetic resonance imaging scans were performed on the right knee of 30 healthy adult volunteers. The imaging data were used to construct a three-dimensional finite element model of the knee joint. The magnitude and concentration area of stress and strain of ACL at knee flexion angles 0°, 30°, 60° and 90° were assessed. RESULTS: The magnitude of stress remained consistent at 0-30° (P > 0.999) and decreased at 30-90° (P < 0.001, P = 0.005, respectively), while the magnitude of strain increased between 0° and 30° (P = 0.004) and decreased between 30° and 90° (P < 0.001, P = 0.004, respectively). The stress concentration area remained consistent at the proximal end, midsubstance, and distal end between 0° and 60° (P > 0.05). The concentration area of strain increased at the proximal end, decreased at the midsubstance between 0° and 30°, and remained consistent between 30° and 90° (P < 0.001). CONCLUSION: At the low knee flexion angle, ACL's magnitude of stress and strain reached the peak, and the concentration area of ACL strain gradually shifted from midsubstance to the proximal end.

A comparison of stiffness of six knee braces with application for posterolateral corner reconstructions.

Posterolateral corner knee injuries are clinically significant, and often require surgical reconstruction. The optimal knee brace following posterolateral corner reconstructions has not yet been determined via clinical nor biomechanical study. We sought to evaluate the stiffness of six types of knee braces to determine the ideal brace type for reducing varus forces, which may have clinical utility for posterolateral corner knee reconstruction rehabilitation. Six different groups of knee braces underwent mechanical testing: cruciate braces, cruciate braces with a valgus bend, medial unloaders, articulating sleeves, hinged braces, and tri-panel immobilizers. Each brace was fitted to the same fiberglass leg model and was secured to the testing apparatus. Force was applied under four-point bending to generate a varus moment about the artificial knee. The stiffness in Newtons per millimeter (N/mm) of each brace was calculated from the slope of the force-displacement curve. The cruciate brace with a valgus bend had the highest average stiffness at 192.61 N/mm (SD 28.53). The articulating sleeve was the least stiff with an average stiffness of 49.86 N/mm (SD 8.99). Stiffness of the cruciate brace was not statistically different compared to cruciate valgus (p = 0.083) or medial unloader (p = 0.098). In this experimental design, a cruciate brace with a valgus bend was shown to have the highest overall stiffness, while an articulating sleeve had the lowest stiffness. Future work will investigate whether this translates into clinical performance.

Investigation of Characteristic Motion Patterns of the Knee Joint During a Weightbearing Flexion.

This study aimed to develop and validate a novel flexion axis concept by calculating the points on femoral condyles that could maintain constant heights during knee flexion. Twenty-two knees of 22 healthy subjects were investigated when performing a weightbearing single leg lunge. The knee positions were captured using a validated dual fluoroscopic image system. The points on sagittal planes of the femoral condyles that had minimal changes in heights from the tibial plane along the flexion path were calculated. It was found that the points do formulate a medial-lateral flexion axis that was defined as the iso-height axis (IHA). The six degrees of freedom (6DOF) kinematics data calculated using the IHA were compared with those calculated using the conventional transepicondylar axis and geometrical center axis. The IHA measured minimal changes in proximal-distal translations and varus-valgus rotations along the flexion path, indicating that the IHA may have interesting clinical implications. Therefore, identifying the IHA could provide an alternative physiological reference for improvement of contemporary knee surgeries, such as ligament reconstruction and knee replacement surgeries that are aimed to reproduce normal knee kinematics and medial/lateral soft tissue tensions during knee flexion.

Comparison of side-cutting maneuvers versus low impact baseball swing on knee ligament loading in adolescent populations.

BACKGROUND: High impact sports are associated with an increased incidence rate for knee ligament injuries, specifically pertaining to the anterior cruciate ligament and medial collateral ligament. What is less clear is (i) the extent to which high impact activities preferentially load the anterior cruciate ligament versus the medial collateral ligament, and (ii) whether both ligaments experience similar stretch ratios during high loading scenarios. Therefore, the goal of this project was to assess how different loading conditions experienced through more at-risk sporting maneuvers influence the relative displacements of the anterior cruciate ligament and medial collateral ligament. The focus of the study was on adolescent patients - a group that has largely been overlooked when studying knee ligament biomechanics. METHODS: Through kinetic knee data obtained through motion capture experimentation, two different loading conditions (high vs low impact) were applied to 22 specimen-specific adolescent finite element knee models to investigate the biomechanical impact various sporting maneuvers place on the knee ligaments. FINDINGS: The high impact side cutting maneuver resulted in 102% and 47% increases in ligament displacement compared to the low impact baseball swing (p < 0.05) for both the anterior cruciate ligament and medial collateral ligament. INTERPRETATION: Quantifying biomechanical risks that sporting activities place on adolescent subjects provides physicians with insight into knee ligament vulnerability. More specifically, knowing the risks that various sports place on ligaments helps guide the selection of sports for at-risk patients (especially those who have undergone knee ligament surgery).

Effect of the core bone engaged length on the BASHTI fixation strength, an in-vitro study on bovine tendons using identical-density surrogate bones.

BACKGROUND: BASHTI is an implant-less anterior cruciate ligament (ACL) reconstruction technique, which resolves the problems caused by implants such as interference screws. This study aims to investigate the effect of the drill bit and tendon's diameter on the Core Bone Engaged Length (CBEL) and the fixation strength. CBEL is the length of core bone which has a full engagement with both tunnel and graft at the same time. METHODS: 60 in-vitro tests were conducted for 6, 7, 8, and 9 mm tendon sizes with a 10 mm bone tunnel. In this study bovine tendons and dummy bone blocks were used to model the fixation. Drill bits were used to extract the core bone for securing the auto-graft. A three-stage tensile test including a force-controlled cyclical preloading of 10-50 N with a frequency of 0.1 Hz for 10 cycles, followed by the main force-controlled cyclical loading of 50-200 N with a frequency of 0.5 Hz for 150 cycles, and immediately a displacement-controlled single cycle pull-out load with a rate of 20 mm/min were carried out to discover the fixation strength of each sample. RESULTS: The 6 mm group had the greatest CBEL. However, all cases in this group failed in loadings below 200 N, which is the minimum required strength after ACL reconstruction. The fixation strength of cases with more than 200 N fixation strength for 7, 8, and 9 mm tendon diameters were 275 ± 42, 330 ± 110, and 348 ± 93 N, respectively, showing insignificant difference between groups (P-value = 0.45). Nevertheless, CBELs for these groups were 16.6 ± 3.4, 9.6 ± 2.4, and 11.7 ± 3.8 mm, respectively, implying a significant increase in CBEL in the 7 mm group than that for 8 and 9 mm groups (P-value = 0.002 and 0.049, respectively). CONCLUSION: Results showed that CBEL could assess the quality of BASHTI technique. However, CBEL was an inverse function of tendon compression, so it was not an independent parameter to determine BASHTI strength. Also, the CBEL of 7 mm group which fulfilled the 200 N threshold was higher than that of 8 and 9 mm groups, so its healing process speed may be higher, which is recommended for a future study in this field.

Gait biomechanics phenotypes among total knee arthroplasty candidates by machine learning cluster analysis.

Knee osteoarthritis patient phenotyping is relevant to developing targeted treatments and assessing the treatment efficacy of total knee arthroplasty (TKA). This study aimed to identify clusters among TKA candidates based on demographic and knee mechanic features during gait, and compare gait changes between clusters postoperatively. TKA patients underwent 3D gait analysis 1-week pre (n = 134) and 1-year post-TKA (n = 105). Principal component analysis was applied to frontal and sagittal knee angle and moment waveforms, extracting major patterns of variability. Age, sex, body mass index, gait speed, and frontal and sagittal pre-TKA angle and moment PC scores previously identified as relevant to TKA outcomes were standardized (mean = 0, SD = 1, [134 × 15]). Multidimensional scaling and machine learning-based hierarchical clustering were applied. Final clusters were validated by examining intercluster differences pre-TKA and gait feature changes (PostPCscore - PrePCscore ) by k-way Χ2 and ANOVA tests. Four TKA candidate phenotypes yielded optimum clustering metrics, interpreted as higher and lower functioning clusters that were predominantly male and female. Higher functioning clusters pre-TKA (clusters 1 and 4) had more dynamic sagittal flexion moment (p < 0.001) and frontal plane adduction moment (p < 0.001) loading/un-loading patterns during stance. Post-TKA, higher functioning clusters demonstrated less knee mechanic improvements during gait (flexion angle p < 0.001; flexion moment p < 0.001). TKA candidates can be characterized by four clusters, predominately separated by sex and knee joint biomechanics. Post-TKA knee kinematics and kinetics improvements were cluster-specific; lower functioning clusters experienced more improvement. Cluster-based patient profiling may aid in triaging and developing OA management and surgical strategies meeting group-level function needs.

Do individuals with knee osteoarthritis walk with distinct knee biomechanics and muscle activation characteristics? An investigation of knee osteoarthritis, hip osteoarthritis, and asymptomatic groups.

BACKGROUND: Biomechanical markers including reductions in sagittal plane kinematics and moments, increases in knee adduction moments (KAM), and altered muscle activations have been identified as hallmark indicators of knee osteoarthritis (OA). However, it remains unknown whether these features of knee OA gait are exclusive to the diseased joint. RESEARCH QUESTION: To determine whether specific gait outcomes previously linked to symptomatic medial compartment knee OA are unique to knee OA by concurrently investigating a group of asymptomatic individuals and those with hip OA. METHODS: 16 individuals with moderate medial compartment knee OA, 16 individuals with moderate hip OA, and 16 asymptomatic controls were recruited. Participants walked on a treadmill while segment kinematics and ground reaction forces were recorded. Sagittal plane kinematics and sagittal and frontal plane moments were calculated. Surface electromyograms were recorded from lateral and medial hamstrings and gastrocnemius and vastus lateralis and medialis. Discrete variable analysis was used to investigate knee joint mechanics and muscle activation ratios. Analysis of Variance models using Bonferroni corrections determined between group differences (α = 0.0167). RESULTS: Sagittal plane knee kinematics and moments were statistically similar among all groups (p > 0.0167). No differences were found for peak KAM and impulse between knee OA and asymptomatic groups (p > 0.0167) but peak KAM (p = 0.006 and impulse (p = 0.001) were greater in the knee OA group compared to hip OA. The hip OA group had a lower KAM impulse (p < 0.0167) compared to the knee OA and asymptomatic groups. A greater LH:MH activation ratio (p < 0.0167) was found in the knee OA group compared to hip OA and asymptomatic groups. No other activation ratio differences were found (p > 0.0167). SIGNIFICANCE: Medial and lateral hamstring muscle activation levels may provide utility as a knee OA gait biomarker compared to biomechanical outcomes, quadriceps and gastrocnemius activation, when differentiating knee OA from asymptomatic and hip OA cohorts.