Effect of lysozyme combined with hydrothermal pretreatment on excess sludge and anaerobic digestion.

Anaerobic digestion (AD) is widely employed for sludge stabilization and waste reduction. However, the slow hydrolysis process hinders methane production and leads to prolonged sludge issues. In this study, an efficient and eco-friendly lysozyme pre-treatment method was utilized to address these challenges. By optimizing lysozyme dosage, hydrolysis and cell lysis were maximized. Furthermore, lysozyme combined with hydrothermal pretreatment enhanced overall efficiency. Results indicate that: (1) When lysozyme dosage reached 90 mg/g TS after 240 min of pretreatment, SCOD, soluble polysaccharides, and protein content reached their maxima at 855.00, 44.09, and 204.86 mg/L, respectively. This represented an increase of 85.87%, 365.58%, and 259.21% compared to the untreated sludge. Three-dimensional fluorescence spectroscopy revealed the highest fluorescence intensity in the IV region (soluble microbial product), promoting microbial metabolic activity. (2) Lysozyme combined with hydrothermal pretreatment significantly increased SCOD, soluble proteins, and polysaccharide release from sludge, reducing SCOD release time. Orthogonal experiments identified Group 3 as the most effective for SCOD and soluble polysaccharide release, while Group 9 released the most soluble proteins. The significance order of factors influencing SCOD, soluble proteins, and polysaccharide release is hydrothermal temperature > hydrothermal time > enzymatic digestion time.(3) The lysozyme-assisted hydrothermal pretreatment group exhibited the fastest release and the highest SCOD concentration of 8,135.00 mg/L during anaerobic digestion. Maximum SCOD consumption and cumulative gas production increased by 95.89% and 130.58%, respectively, compared to the control group, allowing gas production to conclude 3 days earlier.

Heat-treated and/or lysozyme-treated Enterococcus faecalis (FK-23) improves the progression of renal disease in a unilateral ischemia-reperfusion injury rat model.

The prevalence of chronic kidney disease (CKD) is increasing owing to the elderly population. Here, we investigated the effects of heat-treated Enterococcus faecalis (FK-23) and lysozyme-treated FK-23 (LFK) on the progression of CKD in rats. A CKD model was established using male Wistar rats by subjecting them to right nephrectomy (1K), followed by ischemia and reperfusion (IR). FK-23 or LFK was fed ad libitum as a mixed diet after right nephrectomy. Animals subjected to renal ischemia-reperfusion injury (IRI) showed increased plasma creatinine and blood urea nitrogen levels. Furthermore, in the kidneys, collagen accumulation and α-smooth muscle actin, indicative of fibroblast activation and fibrosis-related gene and protein expression, increased 3 weeks after IRI. FK-23 and LFK suppressed the increase in the mRNA levels of some of these genes. The increase in oxidative stress markers, 4-hydroxy-2-nonenal, endothelial nitric oxide synthase, and nitrotyrosine in the kidney, as well as increased plasma uremic toxins after IRI, were also ameliorated by FK-23 and LFK. Metagenomic analysis of fecal samples revealed that gut microbial alteration caused by IRI was also ameliorated by LFK treatment. These results suggest that Enterococcus faecalis ingredients may improve CKD progression by suppressing oxidative stress and correcting the balance of the intestinal microflora.

Physicochemical and Adsorption Properties of Nanoporous Activated Biocarbons from Thermochemical Treatment of Horsetail Herb.

The adsorption characteristics of novel activated biocarbons prepared from horsetail herb by physical activation (using carbon dioxide) and chemical one (using phosphoric(V) acid) in the process of simultaneous proteins immobilization in multicomponent solutions were examined. The carbon materials were characterized in terms of their porous structure, acidic-basic properties, and surface morphology. The binding mechanisms of such proteins as bovine serum albumin (BSA) and lysozyme (LSZ), differing in internal stability, were determined alone and in their blends. This was done based on the comprehensive analysis of the results of adsorption/desorption, surface, electrokinetic and stability measurements. These experiments were carried out over a wide pH range of 3-11. They included the following issues: (1) determination of the protein adsorbed/desorbed amounts on/from a surface of activated biocarbons; (2) study of the kinetics of these processes; (3) examination of the macromolecules impact on the surface charge density and zeta potential of the carbon materials; and (4) determination of the suspension stability and size of aggregates formed in the examined systems. The analysis of the obtained results indicated the differences in the binding mechanism of both proteins that is of key importance for their simultaneous immobilization on activated biocarbons surface in the soil environment.

An i-type lysozyme from a crustacean, Pacifastacus leniusculus, functions as a clot-destabilising enzyme.

Lysozymes are hydrolytic enzymes, and they are ubiquitous among all living organisms. They are mostly associated with antibacterial properties through their muramidase activity, while other properties such as iso-peptidase activity are also common. Invertebrate-type (i-type) lysozymes include the enzyme Destabilase, which is present in the salivary secretions of the medicinal leach Hirundo medicinalis. Destabilase has the ability to hydrolyse the ε-(γ-glutamyl)-lysine iso-peptide bonds formed by transglutaminase in fibrin of vertebrate blood, thereby destabilising blood clots. We have identified an i-type lysozyme from the hemocytes of the freshwater crayfish Pacifastacus leniusculus, which was found to be upregulated at the protein level in response to an injection of the ß-1,3-glucan laminarin. Based on its sequence we predicted that this lysozyme would lack muramidase activity, and therefore we decided to determine its putative immune function. The P. leniusculus i-type lysozyme (Pl-ilys), is a protein with 159 amino acid residues, including a 29 residue signal peptide, with a predicted molecular weight of 16 kDa and a predicted pI of 5.6. It is expressed primarily in the hemocytes and to a lesser extent in the hematopoietic tissue. A recombinant mature Pl-ilys using an E. coli expression system was produced, and we could ascertain that this enzyme was deficient of muramidase activity. Moreover, no iso-peptidase activity could be detected against the substrate l-γ-glutamine-p-nitroanilide. Analysis of the conserved domains in Pl-ilys showed a putative destabilase domain, and thus we tested the clot dissolving activity of this enzyme. We could show that the purified P. leniusculus clotting protein which had been coagulated and clotted with transglutaminase was dissolved by the addition of Pl-ilys. Taken together our results indicate that Pl-ilys has a clot dissolving or destabilising activity in crustacean blood.

Data of fixed-target pink-beam serial synchrotron crystallography at the Pohang Light Source II.

Pink-beam serial synchrotron crystallography (SSX) is beneficial in terms of X-ray flux and overcoming partial reflection compared with SSX using a monochromatic beam. The fixed-target (FT) scanning method can minimize the physical damage on the crystal sample when delivering the crystals to the X-ray interaction point. Additionally, general researchers can easily access the experiment since no specialized sample transfer technology is needed. The fixed-target pink-beam SSX at the 1C beamline at the Pohang Light Source II (PLS-II) was previously demonstrated using a newly developed magnetic-based sample holder. The room-temperature structure of glucose isomerase and lysozyme were determined using FT pink-beam SSX. Meanwhile, the SSX dataset for glucose isomerase and lysozyme images containing the high X-ray background and multi-crystal hits. These data can be tentatively used to develop an indexing algorithm and practice processing the SX data. This study used detailed information on the diffraction data of fixed-target pink-beam SSX at PLS-II to access the raw data and process the information.

Gas Cluster Ion Beam-Assisted Deposition for Fabricating Dry Multilayers Containing Enzyme and Substrate with On-Demand Release.

Gas cluster ion beam (GCIB)-assisted deposition is used to build multilayered protein-based structures. In this process, Ar3000-5000+ clusters bombard and sputter molecules from a reservoir (target) to a collector, an operation that can be sequentially repeated with multiple targets. The process occurs under a vacuum, making it adequate for further sample conservation in the dry state, since many proteins do not have long-term storage stability in the aqueous state. First of all, the stability in time and versatility in terms of molecule selection are demonstrated with the fabrication of peptide multilayers featuring a clear separation. Then, lysozyme and trypsin are used as protein models to show that the activity remaining on the collector after deposition is linearly proportional to the argon ion dose. The energy per atom (E/n) of the Ar clusters is a parameter that was also changed for lysozyme deposition, and its increase negatively affects activity. The intact detection of larger protein molecules by SDS-PAGE gel electrophoresis and a bioassay (trypsin at ≈25 kDa and glucose oxidase (GOx) at ≈80 kDa) is demonstrated. Finally, GOx and horseradish peroxidase, two proteins involved in the same enzymatic cascade, are successively deposited on ß-d-glucose to build an on-demand release material in which the enzymes and the substrate (ß-d-glucose) are combined in a dry trilayer, and the reaction occurs only upon reintroduction in aqueous medium.

Towards Enhanced Tunability of Aqueous Biphasic Systems: Furthering the Grasp of Fluorinated Ionic Liquids in the Purification of Proteins.

This work unfolds functionalized ABSs composed of FILs ([C2C1Im][C4F9SO3] and [N1112(OH)][C4F9SO3]), mere fluoro-containing ILs ([C2C1Im][CF3SO3] and [C4C1Im][CF3SO3]), known globular protein stabilizers (sucrose and [N1112(OH)][C4F9SO3]), low-molecular-weight carbohydrate (glucose), and even high-charge density salt (K3PO4). The ternary phase diagrams were determined, stressing that FILs highly increased the ability for ABS formation. The functionalized ABSs (FILs vs. mere fluoro-containing ILs) were used to extract lysozyme (Lys). The ABSs' biphasic regions were screened in terms of protein biocompatibility, analyzing the impact of ABS phase-forming components in Lys by UV-VIS spectrophotometry, CD spectroscopy, fluorescence spectroscopy, DSC, and enzyme assay. Lys partition behavior was characterized in terms of extraction efficiency (% EE). The structure, stability, and function of Lys were maintained or improved throughout the extraction step, as evaluated by CD spectroscopy, DSC, enzyme assay, and SDS-PAGE. Overall, FIL-based ABSs are more versatile and amenable to being tuned by the adequate choice of the phase-forming components and selecting the enriched phase. Binding studies between Lys and ABS phase-forming components were attained by MST, demonstrating the strong interaction between Lys and FILs aggregates. Two of the FIL-based ABSs (30 %wt [C2C1Im][C4F9SO3] + 2 %wt K3PO4 and 30 %wt [C2C1Im][C4F9SO3] + 25 %wt sucrose) allowed the simultaneous purification of Lys and BSA in a single ABS extraction step with high yield (extraction efficiency up to 100%) for both proteins. The purity of both recovered proteins was validated by SDS-PAGE analysis. Even with a high-charge density salt, the FIL-based ABSs developed in this work seem more amenable to be tuned. Lys and BSA were purified through selective partition to opposite phases in a single FIL-based ABS extraction step. FIL-based ABSs are proposed as an improved extraction step for proteins, based on their biocompatibility, customizable properties, and selectivity.

Analyzing noncovalent interactions between notoginseng saponins and lysozyme by deposition scanning intensity fading MALDI-TOF mass spectrometry.

Analysis of noncovalent interactions between natural products and proteins is important for rapid screening of active ingredients and understanding their pharmacological activities. In this work, the intensity fading MALDI-TOF mass spectrometry (IF-MALDI-MS) method with improved reproducibility was implemented to investigate the binding interactions between saponins from Panax notoginseng and lysozyme. The benchmark IF-MALDI-MS experiment was established using N,N',N″-triacetylchitotriose-lysozyme as a model system. The reproducibility of ion intensities in IF-MALDI-MS was improved by scanning the whole sample deposition with a focused laser beam. The relative standard deviation (RSD) of deposition scanning IF-MALDI-MS is 5.7%. Similar decay trends of the relative intensities of notoginseng saponins against increasing amounts of lysozyme were observed for all six notoginseng saponins. The half-maximal fading concentration (FC50) was calculated to quantitatively characterize the binding affinity of each ligand based on the decay curve. According to the FC50 values obtained, the binding affinities of the six notoginseng saponins were evaluated in the following order: notoginsenoside S > notoginsenoside Fc > ginsenoside Rb1 > ginsenoside Rd > notoginsenoside Ft1 > ginsenoside Rg1. The binding order was in accordance with molecular docking studies, which showed hydrogen bonding might play a key role in stabilizing the binding interaction. Our results demonstrated that deposition scanning IF-MALDI-MS can provide valuable information on the noncovalent interactions between ligands and proteins.

Molecular insights into the phase transition of lysozyme into amyloid nanostructures: Implications of therapeutic strategies in diverse pathological conditions.

Lysozyme, a well-known bacteriolytic enzyme, exhibits a fascinating yet complex behavior when it comes to protein aggregation. Under certain conditions, this enzyme undergoes flexible transformation, transitioning from partially unfolded intermediate units of native conformers into complex cross-ß-rich nano fibrillar amyloid architectures. Formation of such lysozyme amyloids has been implicated in a multitude of pathological and medical severities, like hepatic dysfunction, hepatomegaly, splenic rupture as well as spleen dysfunction, nephropathy, sicca syndrome, renal dysfunction, renal amyloidosis, and systemic amyloidosis. In this comprehensive review, we have attempted to provide in-depth insights into the aggregating behavior of lysozyme across a spectrum of variables, including concentrations, temperatures, pH levels, and mutations. Our objective is to elucidate the underlying mechanisms that govern lysozyme's aggregation process and to unravel the complex interplay between its structural attributes. Moreover, this work has critically examined the latest advancements in the field, focusing specifically on novel strategies and systems, that have been implemented to delay or inhibit the lysozyme amyloidogenesis. Apart from this, we have tried to explore and advance our fundamental understanding of the complex processes involved in lysozyme aggregation. This will help the research community to lay a robust foundation for screening, designing, and formulating targeted anti-amyloid therapeutics offering improved treatment modalities and interventions not only for lysozyme-linked amyloidopathy but for a wide range of amyloid-related disorders.

Antimicrobial peptides and proteins as alternative antibiotics for porcine semen preservation.

BACKGROUND: Antimicrobial resistance (AMR) is nowadays a major emerging challenge for public health worldwide. The over- and misuse of antibiotics, including those for cell culture, are promoting AMR while also encouraging the research and employment of alternative drugs. The addition of antibiotics to the cell media is strongly recommended in sperm preservation, being gentamicin the most used for boar semen. Because of its continued use, several bacterial strains present in boar semen have developed resistance to this antibiotic. Antimicrobial peptides and proteins (AMPPs) are promising candidates as alternative antibiotics because their mechanism of action is less likely to promote AMR. In the present study, we tested two AMPPs (lysozyme and nisin; 50 and 500 µg/mL) as possible substitutes of gentamicin for boar semen preservation up to 48 h of storage. RESULTS: We found that both AMPPs improved sperm plasma membrane and acrosome integrity during semen storage. The highest concentration tested for lysozyme also kept the remaining sperm parameters unaltered, at 48 h of semen storage, and reduced the bacterial load at comparable levels of the samples supplemented with gentamicin (p > 0.05). On the other hand, while nisin (500 µg/mL) reduced the total Enterobacteriaceae counts, it also decreased the rapid and progressive sperm population and the seminal oxidation-reduction potential (p < 0.05). CONCLUSIONS: The protective effect of lysozyme on sperm function together with its antimicrobial activity and inborn presence in body fluids, including semen and cervical mucus, makes this enzyme a promising antimicrobial agent for boar semen preservation.

A sensitive CRISPR/Cas12a-assisted fluorescent aptasensor for rapid detection of food allergens.

Food allergens elicit abnormal immune system responses among allergic individuals and sensitive detection for allergenic ingredient is greatly significant. To address this need, a novel fluorescent aptasensor, assisted by Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR), have been developed for food allergens. In this study, aptamer offers distinctive recognition capabilities in binding specific targets, while CRISPR-associated-12a protein (Cas12a) holds precise cis-cleavage for cutting fluorescent signal probes. Notably, the utilization of Cas12a cis-cleavage activity, rather than trans-cleavage, eliminates the necessity for additional fluorescent probes, thus reducing interference between substances and enhancing sensitivity. Throughout the process, complementary DNA (cDNA) plays a crucial dual role in target recognition conversion and signal presentation, representing a key challenge and innovative aspect of this study. To evaluate the performance of the aptasensor, lysozyme (LYS) is employed as a representative model target of food allergens. Under optimal conditions, the developed aptasensor could achieve an exceptional low limit of detection (LOD) of 6.10 pM with a dynamic detection range of 10 pM-320 pM. The aptasensor demonstrates high selectivity and great recovery rates. This strategy yields promising outcomes, holding the potential to serve as a valuable reference for various food allergens detection.

Hydrophilic molecularly imprinted lysozyme-BiOBr composite with enhanced visible light utilization for selective removal of trace contaminants in water.

The development of high-efficiency molecularly imprinted photocatalysts is still challenging due to the lack of hydrophilic and suitable functional monomers. In this work, the bio-sourced lysozyme was developed as the hydrophilic functional monomer, and Cu-doped BiOBr was used as the photocatalysts, to prepare a novel hydrophilic molecularly imprinted lysozyme-BiOBr composite (BiOBr-Cu/LyzMIP) with enhanced visible light utilization. Lysozyme could form a transparent layer to mitigate the light transmission obstruction caused by the surface imprinting layer, making it an ideal functional monomer. The prepared BiOBr-Cu/LyzMIP possessed red-shifted visible-light absorption edge and minor reduction of light absorbance, indicating the enhanced utilization of visible light. Accordingly, BiOBr-Cu/LyzMIP demonstrated excellent degradation rate (99.4 % in 20 min), exceptional degradation efficiency (0.211 min-1), and superior reusability. Moreover, BiOBr-Cu/LyzMIP exhibited rapid adsorption equilibrium (20 min), good imprinting factor (2.67), and favourable degradation selectivity (>1.75), indicating the good imprinting effect resulting from abundant functional groups of lysozyme. Versatility experiments on different templates suggested that the proposed approach allowed flexibility in selecting a wide range of hazardous contaminants according to practical requirements. The present work expands the application of lysozyme-based composites in the environmental field, and provides a new one-stop pathway for efficient and sustainable treatment of contaminated water.

Efficient production of a highly active lysozyme from European flat oyster Ostrea edulis.

Lysozyme, an antimicrobial agent, is extensively employed in the food and healthcare sectors to facilitate the breakdown of peptidoglycan. However, the methods to improve its catalytic activity and secretory expression still need to be studied. In the present study, twelve lysozymes from different origins were heterologously expressed using the Komagataella phaffii expression system. Among them, the lysozyme from the European flat oyster Ostrea edulis (oeLYZ) showed the highest activity. Via a semi-rational approach to reduce the structural free energy, the double mutant Y15A/S39R (oeLYZdm) with the catalytic activity 1.8-fold greater than that of the wild type was generated. Subsequently, different N-terminal fusion tags were employed to enhance oeLYZdm expression. The fusion with peptide tag 6×Glu resulted in a remarkable increase in the recombinant oeLYZdm expression, from 2.81 × 103 U mL-1 to 2.11 × 104 U mL-1 in shake flask culture, and eventually reaching 2.05 × 105 U mL-1 in a 3-L fermenter. The work produced the greatest amount of heterologous oeLYZ expression in microbial systems that are known to exist. Reducing the structural free energy and employing the N-terminal fusion tags are effective strategies to improve the catalytic activity and secretory expression of lysozyme.

Lysozyme: an endogenous antimicrobial protein with potent activity against extracellular, but not intracellular Mycobacterium tuberculosis.

Endogenous antimicrobial peptides (AMPs) play a key role in the host defense against pathogens. AMPs attack pathogens preferentially at the site of entry to prevent invasive infection. Mycobacterium tuberculosis (Mtb) enters its host via the airways. AMPs released into the airways are therefore likely candidates to contribute to the clearance of Mtb immediately after infection. Since lysozyme is detectable in airway secretions, we evaluated its antimicrobial activity against Mtb. We demonstrate that lysozyme inhibits the growth of extracellular Mtb, including isoniazid-resistant strains. Lysozyme also inhibited the growth of non-tuberculous mycobacteria. Even though lysozyme entered Mtb-infected human macrophages and co-localized with the pathogen we did not observe antimicrobial activity. This observation was unlikely related to the large size of lysozyme (14.74 kDa) because a smaller lysozyme-derived peptide also co-localized with Mtb without affecting the viability. To evaluate whether the activity of lysozyme against extracellular Mtb could be relevant in vivo, we incubated Mtb with fractions of human serum and screened for antimicrobial activity. After several rounds of sub-fractionation, we identified a highly active fraction-component as lysozyme by mass spectrometry. In summary, our results identify lysozyme as an antimycobacterial protein that is detectable as an active compound in human serum. Our results demonstrate that the activity of AMPs against extracellular bacilli does not predict efficacy against intracellular pathogens despite co-localization within the macrophage. Ongoing experiments are designed to unravel peptide modifications that occur in the intracellular space and interfere with the deleterious activity of lysozyme in the extracellular environment.

Characterization of the structural and molecular interactions of Ferulic acid ethyl ester with human serum albumin and Lysozyme through multi-methods.

Ferulic acid ethyl ester (FAEE) is an essential raw material for the formulation of drugs for cardiovascular and cerebrovascular diseases and leukopenia. It is also used as a fixed aroma agent for food production due to its high pharmacological activity. In this study, the interaction of FAEE with Human serum albumin (HSA) and Lysozyme (LZM) was characterized by multi-spectrum and molecular dynamics simulations at four different temperatures. Additionally, the quenching mechanism of FAEE-HSA and FAEE-LZM were explored. Meanwhile, the binding constants, binding sites, thermodynamic parameters, molecular dynamics, molecular docking binding energy, and the influence of metal ions in the system were evaluated. The results of Synchronous fluorescence spectroscopy, UV-vis spectroscopy, CD, three-dimensional fluorescence spectrum, and resonance light scattering showed that the microenvironment of HSA and LZM and the protein conformation changed in the presence of FAEE. Furthermore, the effects of some common metal ions on the binding constants of FAEE-HSA and FAEE-LZM were investigated. Overall, the experimental results provide a theoretical basis for promoting the application of FAEE in the cosmetics, food, and pharmaceutical industries and significant guidance for food safety, drug design, and development.

Co-immobilization of crosslinked enzyme aggregates on lysozyme functionalized magnetic nanoparticles for enhancing stability and activity.

Surface chemistry of carriers plays a key role in enzyme loading capacity, structure rigidity, and thus catalyze activity of immobilized enzymes. In this work, the two model enzymes of horseradish peroxidase (HRP) and glucose oxidase (GOx) are co-immobilized on the lysozyme functionalized magnetic core-shell nanocomposites (LYZ@MCSNCs) to enhance their stability and activity. Briefly, the HRP and GOx aggregates are firstly formed under the crosslinker of trimesic acid, in which the loading amount and the rigidity of the enzyme can be further increased. Additionally, LYZ easily forms a robust anti-biofouling nanofilm on the surface of SiO2@Fe3O4 magnetic nanoparticles with abundant functional groups, which facilitate chemical crosslinking of HRP and GOx aggregates with minimized inactivation. The immobilized enzyme of HRP-GOx@LYZ@MCSNCs exhibited excellent recovery activity (95.6 %) higher than that of the free enzyme (HRP&GOx). Specifically, 85 % of relative activity was retained after seven cycles, while 73.5 % of initial activity was also remained after storage for 33 days at 4 °C. The thermal stability and pH adaptability of HRP-GOx@LYZ@MCSNCs were better than those of free enzyme of HRP&GOx. This study provides a mild and ecofriendly strategy for multienzyme co-immobilization based on LYZ functionalized magnetic nanoparticles using HRP and GOx as model enzymes.

Non-Covalent and Covalent Binding of New Mixed-Valence Cage-like Polyoxidovanadate Clusters to Lysozyme.

The high-resolution X-ray structures of the model protein lysozyme in the presence of the potential drug [VIVO(acetylacetonato)2] from crystals grown in 1.1 M NaCl, 0.1 M sodium acetate at pH 4.0 reveal the binding to the protein of different and unexpected mixed-valence cage-like polyoxidovanadates (POVs): [V15O36(OH2)]5-, which non-covalently interacts with the lysozyme surface, [V15O33(OH2)]+ and [V20O51(OH2)]n- (this latter based on an unusual {V18O43} cage) which covalently bind the protein. EPR spectroscopy confirms the partial oxidation of VIV to VV and the formation of mixed-valence species. The results indicate that the interaction with proteins can stabilize the structure of unexpected - both for dimension and architecture - POVs, not observed in aqueous solution.

Intestinal lysozyme engagement of Salmonella Typhimurium stimulates the release of barrier-impairing InvE and Lpp1.

Lysozyme is a ß-1,4-glycosidase that hydrolyzes the polysaccharide backbone of bacterial cell walls. With an additional bactericidal function mediated by a separate protein domain, lysozyme is considered a uniquely important antimicrobial molecule contributing to the host's innate immune response to infection. Elevated lysozyme production is found in various inflammatory conditions while patients with genetic risks for inflammatory bowel diseases demonstrate abnormal lysozyme expression, granule packaging, and secretion in Paneth cells. However, it remains unclear how a gain- or loss-of-function in host lysozyme may impact the host inflammatory responses to pathogenic infection. We challenged Lyz1-/- and ectopic Lyz1-expressing (Villin-Lyz1TG) mice with S. Typhimurium and then comprehensively assessed the inflammatory disease progression. We conducted proteomics analysis to identify molecules derived from human lysozyme-mediated processing of live Salmonella. We examined the barrier-impairing effects of these identified molecules in human intestinal epithelial cell monolayer and enteroids. Lyz1-/- mice are protected from infection in terms of morbidity, mortality, and barrier integrity, whereas Villin-Lyz1TG mice demonstrate exacerbated infection and inflammation. The growth and invasion of Salmonella in vitro are not affected by human or chicken lysozyme, whereas lysozyme encountering of live Salmonella stimulates the release of barrier-disrupting factors, InvE-sipC and Lpp1, which directly or indirectly impair the tight junctions. The direct engagement of host intestinal lysozyme with an enteric pathogen such as Salmonella promotes the release of virulence factors that are barrier-impairing and pro-inflammatory. Controlling lysozyme function may help alleviate the inflammatory progression.

Cytokinetic engineering enhances the secretory production of recombinant human lysozyme in Komagataella phaffii.

BACKGROUND: Human lysozyme (hLYZ) is a natural antibacterial protein with broad applications in food and pharmaceutical industries. Recombinant production of hLYZ in Komagataella phaffii (K. phaffii) has attracted considerable attention, but there are very limited strategies for its hyper-production in yeast. RESULTS: Here through Atmospheric and Room Temperature Plasma (ARTP)-based mutagenesis and transcriptomic analysis, the expression of two genes MYO1 and IQG1 encoding the cytokinesis core proteins was identified downregulated along with higher hLYZ production. Deletion of either gene caused severe cytokinesis defects, but significantly enhanced hLYZ production. The highest hLYZ yield of 1,052,444 ± 23,667 U/mL bioactivity and 4.12 ± 0.11 g/L total protein concentration were obtained after high-density fed-batch fermentation in the Δmyo1 mutant, representing the best production of hLYZ in yeast. Furthermore, O-linked mannose glycans were characterized on this recombinant hLYZ. CONCLUSIONS: Our work suggests that cytokinesis-based morphology engineering is an effective way to enhance the production of hLYZ in K. phaffii.

Impact of Brief Exposure to Lysozyme and Lactoferrin on Pathogenic Attributes of Oral Candida.

INTRODUCTION AND AIMS: Adhesion to buccal epithelial cells (BEC) and denture acrylic surfaces (DAS), germ tube (GT) formation, cell surface hydrophobicity (CSH), and haemolysin production are attributes associated with pathogenicity of Candida. Candida albicans and Candida dubliniensis are allied in causing oral candidosis. Lysozyme and lactoferrin exert antimicrobial activity on a range of oral microorganisms, including Candida. There is no information on the impact of brief exposure to lysozyme and lactoferrin on adhesion-related attributes and haemolysin production of aforementioned oral Candida isolates. Thus, we investigated the impact of lysozyme and lactoferrin on adhesion to BEC and DAS, GT formation, CSH, and haemolysin production of these isolates. METHODS: After exposure to lysozyme and lactoferrin for 1 hour, susceptibility to lysozyme and lactoferrin of 20 isolates each of C albicans and C dubliniensis isolates was determined following a 48-hour period of incubation. Candida cell suspensions, obtained from colony-forming units after this period, were assessed for adhesion to BEC and DAS, GT formation, CSH, and haemolysin production using in vitro assays. RESULTS: Exposure to lysozyme and lactoferrin significantly suppressed the ability of C albicans and C dubliniensis isolates to adhere to BEC and DAS, GT formation, CSH, and haemolysin production (P < 0.01 for all virulent attributes tested). CONCLUSIONS: These data provide a tantalising glimpse into the possibility that exposure to either lysozyme or lactoferrin, even for a brief period, would induce a sustainable antifungal effect by suppressing adhesion-related attributes and haemolysin production of these oral Candida species in vitro. Resistance to conventional antifungal agents has been reported in clinical isolates of Candida. The presence of such resistance indicates the need for possible alternative therapies to facilitate the management of oral candidosis. Further research on the pharmacodynamics of lysozyme and lactoferrin and their effects on candidal pathogenic attributes should be fostered, with the vision of developing novel topical antifungal drugs.