Functionalized Cellulose Nanocrystals as Active Reinforcements for Light-Actuated 3D-Printed Structures.

Conventional manufacturing techniques allow the production of photoresponsive cellulose nanocrystals (CNC)-based composites that can reversibly modify their optical, mechanical, or chemical properties upon light irradiation. However, such materials are often limited to 2D films or simple shapes and do not benefit from spatial tailoring of mechanical properties resulting from CNC alignment. Herein, we propose the direct ink writing (DIW) of 3D complex structures that combine CNC reinforcement effects with photoinduced responses. After grafting azobenzene photochromes onto the CNC surfaces, up to 15 wt % of modified nanoparticles can be introduced into a polyurethane acrylate matrix. The influence of CNC on rheological properties allows DIW of self-standing 3D structures presenting local shear-induced alignment of the active reinforcements. The printed composites, with longitudinal elastic modulus of 30 MPa, react to visible-light irradiation with 30-50% reversible softening and present a shape memory behavior. The phototunable energy absorption of 3D complex structures is demonstrated by harnessing both geometrical and photoresponsive effects, enabling dynamic mechanical responses to environmental stimuli. Functionalized CNC in 3D printable inks have the potential to allow the rapid prototyping of several devices with tailored mechanical properties, suitable for applications requiring dynamic responses to environmental changes.

Conducting molybdenum sulfide/graphene oxide/polyvinyl alcohol nanocomposite hydrogel for repairing spinal cord injury.

A sort of composite hydrogel with good biocompatibility, suppleness, high conductivity, and anti-inflammatory activity based on polyvinyl alcohol (PVA) and molybdenum sulfide/graphene oxide (MoS2/GO) nanomaterial has been developed for spinal cord injury (SCI) restoration. The developed (MoS2/GO/PVA) hydrogel exhibits excellent mechanical properties, outstanding electronic conductivity, and inflammation attenuation activity. It can promote neural stem cells into neurons differentiation as well as inhibit the astrocytes development in vitro. In addition, the composite hydrogel shows a high anti-inflammatory effect. After implantation of the composite hydrogel in mice, it could activate the endogenous regeneration of the spinal cord and inhibit the activation of glial cells in the injured area, thus resulting in the recovery of locomotor function. Overall, our work provides a new sort of hydrogels for SCI reparation, which shows great promise for improving the dilemma in SCI therapy.

Remodelling of trabecular bone in human distal tibia: A model based on an in-vivo HR-pQCT study.

An abnormal remodelling process of bones can lead to various bone disorders, such as osteoporosis, making them prone to fracture. Simulations of load-induced remodelling of trabecular bone were used to investigate its response to mechanical signal. However, the role of mechanostat in trabecular-bone remodelling has not yet been investigated in simulations underpinned by a longitudinal in-vivo study in humans. In this work, a finite-element model based on a 6-month longitudinal in-vivo HR-pQCT study was developed and validated to investigate the effect of mechanical stimuli on bone remodelling. The simulated changes in microstructural parameters and density of trabecular bone were compared with respective experimental results. A maximum principal strain (MPS) and a maximum principal strain gradient (∇MPS) were used as mechanical signals to drive a five-stage mechanostat remodelling model, including additional over-strain and damage stages. It was found that the density distribution varied with the studied mechanical signals, along with decreasing with time levels of bone volume fraction BV/TV, trabecular thickness Tb.Th and bone surface area Tb.BS as well as increased trabecular separation Tb.Sp. Among these parameters, BV/TV and Tb.Th together with the bone-remodelling parameters from the MPS model demonstrated a significant correlation with the experimental data. The developed model provides a good foundation for further development and investigation of the relationships between mechanical loading and human-bone microarchitecture.

Hierarchical Biomechanical Properties and Constitutive Relationships of Bone Tissues / 医用生物力学

As the main organ of the body, the load-bearing ability of bone is closely connected to its biomechanical properties. Bone is a complex hierarchical biomaterial, whose biomechanical properties are determined by its own structure and biological characteristics. Because of its mechanical adaptability, bone tissues represent different biomechanical properties under different mechanical loading. To quantify the complicated properties of bone and provide an accurate theoretical basis for clinical research, it is necessary to give insight into the biomechanical properties of bone at different levels and the constitutive relationships of bone tissues. In this review, relative researches on constitutive relationships in recent years were summarized based on its hierarchical biomechanical properties.

Hierarchical Biomechanical Properties and Constitutive Relationships of Bone Tissues / 医用生物力学

As the main organ of the body, the load-bearing ability of bone is closely connected to its biomechanical properties. Bone is a complex hierarchical biomaterial, whose biomechanical properties are determined by its own structure and biological characteristics. Because of its mechanical adaptability, bone tissues represent different biomechanical properties under different mechanical loading. To quantify the complicated properties of bone and provide an accurate theoretical basis for clinical research, it is necessary to give insight into the biomechanical properties of bone at different levels and the constitutive relationships of bone tissues. In this review, relative researches on constitutive relationships in recent years were summarized based on its hierarchical biomechanical properties.

Increased stiffness of collagen fibrils following cyclic tensile loading.

Alterations in mechanical loading can induce growth and remodeling in soft connective tissues. Numerous studies have measured changes in the collagen structure and mechanical properties of cellularized native and engineered tissues in response to cyclic mechanical loading. However, a recent experimental study demonstrated that cyclic loading also caused significant stiffening and strengthening of acellular collagen constructs. In this work, we developed an anisotropic hyperelastic model of the collagen constructs to investigate whether the measured changes in the tissue-level properties can be attributed to changes in the anisotropic collagen structure or mechanical properties of the collagen fibrils. The model parameters describing the elastic properties, damage properties, and morphology of the fibril were fit to the stress-stretch response measured for the constructs subjected to different preconditioning strains and cycles. The results showed that the changes in the collagen anisotropy measured in experiments were insufficient to explain the increase in the stiffness and strength of the collagen constructs with cyclic loading and that the increase in the strength of the collagen constructs may be attributed mainly to the increase in the effective stiffness of the fibrils. These findings suggest that mechanical loading can induce changes in the stiffness and failure properties of the collagen fibril network through passive chemomechanical processes in addition to active cellular processes.

Collagen Fiber Orientation in Primate Long Bones.

Studies of variation in orientation of collagen fibers within bone have lead to the proposition that these are preferentially aligned to accommodate different kinds of load, with tension best resisted by fibers aligned longitudinally relative to the load, and compression best resisted by transversely aligned fibers. However, previous studies have often neglected to consider the effect of developmental processes, including constraints on collagen fiber orientation (CFO), particularly in primary bone. Here we use circularly polarized light microscopy to examine patterns of CFO in cross-sections from the midshaft femur, humerus, tibia, radius, and ulna in a range of living primate taxa with varied body sizes, phylogenetic relationships and positional behaviors. We find that a preponderance of longitudinally oriented collagen is characteristic of both periosteal primary and intracortically remodeled bone. Where variation does occur among groups, it is not simply understood via interpretations of mechanical loads, although prioritized adaptations to tension and/or shear are considered. While there is some suggestion that CFO may correlate with body size, this relationship is neither consistent nor easily explicable through consideration of size-related changes in mechanical adaptation. The results of our study indicate that there is no clear relationship between CFO and phylogenetic status. One of the principle factors accounting for the range of variation that does exist is primary tissue type, where slower depositing bone is more likely to comprise a larger proportion of oblique to transverse collagen fibers. Anat Rec, 300:1189-1207, 2017. © 2017 Wiley Periodicals, Inc.

Towards a cell-based mechanostat theory of bone: the need to account for osteocyte desensitisation and osteocyte replacement.

Bone׳s mechanostat theory describes the adaptation of bone tissues to their mechanical environment. Many experiments have investigated and observed such structural adaptation. However, there is still much uncertainty about how to define the reference mechanical state at which bone structure is adapted and stable. Clinical and experimental observations show that this reference state varies both in space and in time, over a wide range of timescales. We propose here an osteocyte-based mechanostat theory that encodes the mechanical reference state in osteocyte properties. This theory assumes that osteocytes are initially formed adapted to their current local mechanical environment through modulation of their properties. We distinguish two main types of physiological processes by which osteocytes subsequently modify the reference mechanical state at different timescales. One is cell desensitisation, which occurs rapidly and reversibly during an osteocyte׳s lifetime. The other is the replacement of osteocytes during bone remodelling, which occurs over the long timescales of bone turnover. The novelty of this theory is to propose that long-lasting morphological and genotypic osteocyte properties provide a material basis for a long-term mechanical memory of bone that is gradually reset by bone remodelling. We test this theory by simulating long-term mechanical disuse (modelling spinal cord injury), and short-term mechanical loadings (modelling daily exercises) with a mathematical model. The consideration of osteocyte desensitisation and of osteocyte replacement by remodelling is able to capture a number of phenomena and timescales observed during the mechanical adaptation of bone tissues, lending support to this theory.

Collagen network strengthening following cyclic tensile loading.

The bulk mechanical properties of tissues are highly tuned to the physiological loads they experience and reflect the hierarchical structure and mechanical properties of their constituent parts. A thorough understanding of the processes involved in tissue adaptation is required to develop multi-scale computational models of tissue remodelling. While extracellular matrix (ECM) remodelling is partly due to the changing cellular metabolic activity, there may also be mechanically directed changes in ECM nano/microscale organization which lead to mechanical tuning. The thermal and enzymatic stability of collagen, which is the principal load-bearing biopolymer in vertebrates, have been shown to be enhanced by force suggesting that collagen has an active role in ECM mechanical properties. Here, we ask how changes in the mechanical properties of a collagen-based material are reflected by alterations in the micro/nanoscale collagen network following cyclic loading. Surprisingly, we observed significantly higher tensile stiffness and ultimate tensile strength, roughly analogous to the effect of work hardening, in the absence of network realignment and alterations to the fibril area fraction. The data suggest that mechanical loading induces stabilizing changes internal to the fibrils themselves or in the fibril-fibril interactions. If such a cell-independent strengthening effect is operational in vivo, then it would be an important consideration in any multiscale computational approach to ECM growth and remodelling.

Plant material features responsible for bamboo's excellent mechanical performance: a comparison of tensile properties of bamboo and spruce at the tissue, fibre and cell wall levels.

BACKGROUND AND AIMS: Bamboo is well known for its fast growth and excellent mechanical performance, but the underlying relationships between its structure and properties are only partially known. Since it lacks secondary thickening, bamboo cannot use adaptive growth in the same way as a tree would in order to modify the geometry of the stem and increase its moment of inertia to cope with bending stresses caused by wind loads. Consequently, mechanical adaptation can only be achieved at the tissue level, and this study aims to examine how this is achieved by comparison with a softwood tree species at the tissue, fibre and cell wall levels. METHODS: The mechanical properties of single fibres and tissue slices of stems of mature moso bamboo (Phyllostachys pubescens) and spruce (Picea abies) latewood were investigated in microtensile tests. Cell parameters, cellulose microfibril angles and chemical composition were determined using light and electron microscopy, wide-angle X-ray scattering and confocal Raman microscopy. KEY RESULTS: Pronounced differences in tensile stiffness and strength were found at the tissue and fibre levels, but not at the cell wall level. Thus, under tensile loads, the differing wall structures of bamboo (multilayered) and spruce (sandwich-like) appear to be of minor relevance. CONCLUSIONS: The superior tensile properties of bamboo fibres and fibre bundles are mainly a result of amplified cell wall formation, leading to a densely packed tissue, rather than being based on specific cell wall properties. The material optimization towards extremely compact fibres with a multi-lamellar cell wall in bamboo might be a result of a plant growth strategy that compensates for the lack of secondary thickening growth at the tissue level, which is not only favourable for the biomechanics of the plant but is also increasingly utilized in terms of engineering products made from bamboo culms.