Fractionation and leaching of Cd, Cu, Fe, Pb, and Zn from smelter residues of an old environmental liability in Argentina.

An integrated chemical and mineralogical characterization approach was applied to smelter wastes collected from 50-year-old dump sites in Argentina. Characterization included pseudo-total element concentrations, acid generation/neutralization potential, sequential extractions, pH-dependent leaching kinetics, and mineralogical analysis of all residues. These analyses provided detailed information on the reactivity of the minerals in the waste material and associated metal release. Cadmium and Zn were the elements of greatest environmental concern due to their high mobility. On average, the release of Zn and Cd in pH-dependent leaching essays reached 17.6% (up to 5.24 mg g-1) and 52.7% (up to 0.02 mg g-1) of the pseudo-total content, respectively. Moreover, Cd and Zn were also the metals that showed the higher proportions of labile fractions associated to the adsorbed and exchangeable fraction (60-92% for Cd and 19-38% for Zn). Since Cd and Zn concentrations in the residue are not high enough to form their own minerals, a large proportion of these elements would be weakly adsorbed on Fe oxyhydroxides. In contrast, the low release of Cu, Pb and Fe would be associated with these elements being incorporated into the crystalline structure of insoluble or very poorly soluble minerals. Lead is incorporated into plumbojarosite and anglesite. Copper was mainly in association with Fe oxyhydroxides and may also have been incorporated into the plumbojarosite structure. The latter could act as a sink especially for Pb under the acidic conditions of the smelter residue. Despite the elevated concentrations of Pb observed in the residue, it showed a very low mobility (≈0.1%), indicating that it is mostly stabilized. Nevertheless, the smelter residue is a continuous source of metals requiring remediation.

Use of sludge from the vehicle industry and its encapsulation of toxic metals in ceramic products.

Despite the various existing studies with wastes from wastewater treatment plants for the production of bricks, there is still a lack of further studies on the technological characterization and application only of hazardous industrial wastes from the treatment of wastewater from the metal-processing automotive industry in the stabilization/solidification with ceramic materials. Therefore, the objective of this work was to evaluate the use of waste from the treatment of wastewater from the metal processing automotive industry for the production of red ceramics by evaluating the mechanical behavior and the potential for encapsulation of contaminants. The waste was originally classified as Class I-Hazardous due to the presence of Se. A clay with a clayey-silty character was used to produce ceramic test specimens by pressing and calcining at 950 °C. In the production of these test specimens, the clay was replaced with 0%, 5%, and 10% waste, and the mechanical properties of linear shrinkage, apparent porosity, water absorption, and three-point flexural strength of the test specimens, as well as the mineralogical, chemical, and microstructural composition such as the leaching of contaminants and potential encapsulation of all test specimens were evaluated. The results showed that after incorporation into the red ceramic, the wastes led to a reduction in flexural strength associated with greater water absorption and porosity, the higher the incorporated percentage. Changes in mineralogy and chemical composition were observed but did not affect microstructure and mechanical properties. The samples did not show metal leaching above national and international standards for toxicity and limits for groundwater and human consumption. It can be concluded that the use of up to 5% of the waste as a replacement for clay meets the requirements for good mechanical performance and encapsulation of the metals originally present in the waste.

Materials Based on Co, Cu, and Cr as Activators of PMS for Degrading a Representative Antibiotic-The Strategy for Utilization in Water Treatment and Warnings on Metal Leaching.

A chromate of copper and cobalt (Φy) was synthesized and characterized. Φy activated peroxymonosulfate (PMS) to degrade ciprofloxacin (CIP) in water. The Φy/PMS combination showed a high degrading capability toward CIP (~100% elimination in 15 min). However, Φy leached cobalt (1.6 mg L-1), limiting its use for water treatment. To avoid leaching, Φy was calcinated, forming a mixed metal oxide (MMO). In the combination of MMO/PMS, no metals leached, the CIP adsorption was low (<20%), and the action of SO4•- dominated, leading to a synergistic effect on pollutant elimination (>95% after 15 min of treatment). MMO/PMS promoted the opening and oxidation of the piperazyl ring, plus the hydroxylation of the quinolone moiety on CIP, which potentially decreased the biological activity. After three reuse cycles, the MMO still presented with a high activation of PMS toward CIP degradation (90% in 15 min of action). Additionally, the CIP degradation by the MMO/PMS system in simulated hospital wastewater was close to that obtained in distilled water. This work provides relevant information on the stability of Co-, Cu-, and Cr-based materials under interaction with PMS and the strategies to obtain a proper catalyst to degrade CIP.

Socio-Environmental Risks Linked with Mine Tailings Chemical Composition: Promoting Responsible and Safe Mine Tailings Management Considering Copper and Gold Mining Experiences from Chile and Peru.

There is a need to define mine tailings in a clear, precise, multidisciplinary, transdisciplinary, and holistic manner, considering not only geotechnical and hydraulic concepts but also integrating environmental and geochemical aspects with implications for the sustainability of mining. This article corresponds to an independent study that answers questions concerning the definition of mine tailings and the socio-environmental risks linked with mine tailings chemical composition by examining the practical experience of industrial-scale copper and gold mining projects in Chile and Peru. Definitions of concepts and analysis of key aspects in the responsible management of mine tailings, such as characterization of metallic-metalloid components, non-metallic components, metallurgical reagents, and risk identification, among others, are presented. Implications of potential environmental impacts from the generation of acid rock drainage (ARD) in mine tailings are discussed. Finally, the article concludes that mine tailings are potentially toxic to both communities and the environment, and cannot be considered as inert and innocuous materials; thus, mine tailings require safe, controlled, and responsible management with the application of the most high management standards, use of the best available technologies (BATs), use of best applicable practices (BAPs), and implementation of the best environmental practices (BEPs) to avoid risk and potential socio-environmental impact due to accidents or failure of tailings storage facilities (TSFs).

Metal leaching, acidity, and altitude confine benthic macroinvertebrate community composition in Andean streams.

Andean streams drain metal-rich bedrock and are subjected to an extreme altitude gradient, which may create highly selective conditions for life. The aim of the present study was to evaluate the combined effects of metals and altitude on benthic macroinvertebrate community composition in Andean streams. Metal-rich sites were characterized by high metal concentrations and low pH, and high-altitude sites were characterized by high ultraviolet-B radiation and low concentrations of dissolved organic matter. Canonical correspondence analysis indicated that the patterns in faunal composition were best explained by metals followed by altitude, with dipterans and collembolans occurring mostly under harsh conditions of high altitude and high metal levels. Interaction between metals and altitude was most evident at metal-rich sites. It is suggested that in Andean streams, metal leaching from igneous rock and altitude may be important factors confining benthic macroinvertebrate communities, reducing their numbers and changing their composition toward specialized taxa.