HIO3-HIO2-Driven Three-Component Nucleation: Screening Model and Cluster Formation Mechanism.

Iodine oxoacids (HIO3 and HIO2)-driven nucleation has been suggested to efficiently contribute to new particle formation (NPF) in marine atmospheres. Abundant atmospheric nucleation precursors may further enhance HIO3-HIO2-driven nucleation through various multicomponent nucleation mechanisms. However, the specific enhancing potential (EP) of different precursors remains largely unknown. Herein, the EP-based screening model of precursors and enhancing mechanism of the precursor with the highest EP on HIO3-HIO2 nucleation were investigated. The formation free energies (ΔG), as critical parameters for evaluating EP, were calculated for the dimers of 63 selected precursors with HIO2. Based on the ΔG values, (1) a quantitative structure-activity relationship model was developed for evaluating ΔG of other precursors and (2) atmospheric concentrations of 63 (precursor)1(HIO2)1 dimer clusters were assessed to identify the precursors with the highest EP for HIO3-HIO2-driven nucleation by combining with earlier results for the nucleation with HIO3 as the partner. Methanesulfonic acid (MSA) was found to be one of the precursors with the highest EP. Finally, we found that MSA can effectively enhance HIO3-HIO2 nucleation at atmospheric conditions by studying larger MSA-HIO3-HIO2 clusters. These results augment our current understanding of HIO3-HIO2 and MSA-driven nucleation and may suggest a larger impact of HIO2 in atmospheric aerosol nucleation.

In-situ lignin sulfonation for enhancing enzymatic hydrolysis of poplar using mild organic solvent pretreatment.

Biomass pretreatment is an essential strategy to overcome biomass recalcitrance and promote lignocellulosic bioconversion. Here, a reusable organic solvent system (formic acid-methanesulfonic acid) was explored to pretreat poplar under a mild temperature (below 100 °C). The results showed that the co-solvent system could extract basically complete hemicelluloses and part of lignin with original cellulose retained in the pretreated substrates. Meanwhile, sulfonic acid groups were introduced into lignin structure remained in the substrates. The glucose conversion yield of the substrates with a higher concentration of sulfonic acid groups (13.2 mmol/kg) reached 45.9 % by reducing the hydrophobic interaction between lignin and cellulase, showing 89.3 % improvement compared with that of the substrates treated with single formic acid. This progressive study aimed to develop a new strategy to realize sulfonation and promote enzymatic hydrolysis of substrates by using mild organic solvent pretreatment.

Chemical characterization of sub-micron aerosols over the East Sea (Sea of Japan).

Studies of the land-sea-air interactions of aerosol are scarce considering their significant role in global environmental changes. Here, we investigated potential sources of sub-micron aerosols over the East Sea (Sea of Japan), which is strongly influenced by continental and marine aerosols. A high-resolution time-of-flight aerosol mass spectrometer (HR-ToF-AMS) was used to measure the size-resolved chemical compositions of sub-micron aerosols during the period March 10-15, 2020. Concentrations of all AMS species, black carbon (BC), PM10 (particulate matter <10 µm) and PM2.5 (particulate matter <2.5 µm) were higher when cruising in industrialized coastal areas compared to the offshore region. A positive matrix factorization (PMF) model identified five distinct sources, i.e., hydrocarbon-like organic aerosol, semi-volatile and low-volatile oxygenated aerosols, methanesulfonic acid (MSA), and dimethyl sulfide (DMS; C2H6S) oxidation, which accounted for 5.98 %, 21.6 %, 28.3 %, 34.5 %, and 9.64 % of the total organic mass, respectively. The spatiotemporal variation of MSA, as well as the MSA to sulfate ratio (MSA:SO42-) over the East Sea, was determined for the first time. The mass concentrations of MSA displayed a similar time series distribution pattern to those of DMS. The time series distributions of the MSA:SO42- ratio displayed distinct differences, with higher ratios downwind of the ocean (0.216 ± 0.083 µg·m-3) than land (0.089 ± 0.030 µg·m-3). The growth of ultrafine particles (10-35 nm) was observed during two of the elevated MSA:SO42- ratio events, suggesting a potential role of MSA in new particle formation.

High Gas-Phase Methanesulfonic Acid Production in the OH-Initiated Oxidation of Dimethyl Sulfide at Low Temperatures.

Dimethyl sulfide (DMS) influences climate via cloud condensation nuclei (CCN) formation resulting from its oxidation products (mainly methanesulfonic acid, MSA, and sulfuric acid, H2SO4). Despite their importance, accurate prediction of MSA and H2SO4 from DMS oxidation remains challenging. With comprehensive experiments carried out in the Cosmics Leaving Outdoor Droplets (CLOUD) chamber at CERN, we show that decreasing the temperature from +25 to -10 °C enhances the gas-phase MSA production by an order of magnitude from OH-initiated DMS oxidation, while H2SO4 production is modestly affected. This leads to a gas-phase H2SO4-to-MSA ratio (H2SO4/MSA) smaller than one at low temperatures, consistent with field observations in polar regions. With an updated DMS oxidation mechanism, we find that methanesulfinic acid, CH3S(O)OH, MSIA, forms large amounts of MSA. Overall, our results reveal that MSA yields are a factor of 2-10 higher than those predicted by the widely used Master Chemical Mechanism (MCMv3.3.1), and the NOx effect is less significant than that of temperature. Our updated mechanism explains the high MSA production rates observed in field observations, especially at low temperatures, thus, substantiating the greater importance of MSA in the natural sulfur cycle and natural CCN formation. Our mechanism will improve the interpretation of present-day and historical gas-phase H2SO4/MSA measurements.

Refining of Precious Metal Bearing Materials from Secondary Sources-Methanesulfonic Acid Leaching of Raw Silver Granules as a Promising Approach towards a Green Way of Silver Refining.

The state-of-the-art technology of raw silver refining in a silver nitrate-based electrorefining process (Moebius-electrolysis) is accompanied by several disadvantages, both from a technological and from an ecological point of view. In addition, increasing concentrations of critical impurities from secondary sources, like palladium, in raw silver are a further challenge for the future of silver refining. Thus, there is strong motivation for the development of an adequate, alternative process of raw silver refining to substitute the existing Moebius-electrolysis. Due to its less environmentally toxic character and the high aqueous solubility of its silver salt, methanesulfonic acid (MSA) is a possible base chemical for the design of an efficient refining method based on leaching of raw silver followed by electrowinning, with less ecological and technological complications. In this paper the results of some fundamental investigations on the leaching of raw silver granules, containing approx. 94% silver, with methanesulfonic acid and hydrogen peroxide as an oxidation agent are presented. Agitation leaching experiments were conducted on a laboratory scale and the effects of the solid concentration, the hydrogen peroxide dosage and the temperature as leaching parameters were studied. The obtained results indicate that silver leaching yields of more than 90% are achievable with leaching at elevated temperatures of 65 °C or 80 °C, solid concentrations of 500 g/L and at a stoichiometric H2O2:Ag-ratio of 3:1. Increased solid concentrations greater than 500 g/L and elevated temperatures of 65 °C or 80 °C additionally improved the selectivity of the process regarding the leaching of Pd.

Stereocomplexed electrospun nanofibers containing poly (lactic acid) modified quaternized chitosan for wound healing.

Skin damage, especially the extensive full-thickness wound, is seriously affecting people's daily life and health. Meanwhile, wound healing is always challenged by bacterial infection. In this study, for the purpose of developing a disinfectant wound dressing, we designed a novel multi-functional nanofiber mats via electrospinning combining chitosan derivations and stereocomplex crystallite (SC). The SC membrane of poly (lactic acid)/chitosan derivatives were prepared via warming at 80 °C for 1 h. The thermal and mechanical properties of the heated mats were strengthened owing to the formation of SC, which restricted the lactide chains mobility. In vivo wound healing test revealed that the SC mats have better wound repair ability than the control group with a wound healing rate of 100 % within 15 days. In a word, the biomass-based mats with enhanced thermal and mechanical properties, antibacterial effect and antioxidant activity, providing a potential multi-functional platform for designing of disinfectant wound dressings.

Ultrasensitive high-performance liquid chromatography determination of tetracycline antibiotics and their 4-epimer derivatives based on dual effect of methanesulfonic acid.

In reversed-phase liquid chromatography, tetracycline antibiotics yield broad and asymmetrical peaks, as a result of their ionic interaction with the anionic free silanol groups and metal ion present in the silica-based stationary phases (commonly derivatized with C18 groups). These frequently encountered difficulties were absolutely eliminated based on dual effect when methanesulfonic acid was employed as an eluent additive. The study revealed that the performance of methanesulfonic acid to minimize the "silanol effect" is mainly explained by both direct neutralization of the anionic silanol sites and electrostatic attraction with analytes. Based on these dual action mechanisms, an ultrasensitive method has been successfully developed for the simultaneous determination of tetracycline antibiotics and their derivatives (minocycline, oxytetracycline, tetracycline, chlortetracycline, metacycline, doxycycline, 4-epitetracycline, and 4-epichlortetracycline) in bovine milk with convenient ultraviolet detection within 15 min. Under the optimal conditions, the calibration curves showed good linearity (r2  > 0.999) for all analytes in the range of 1∼200 ng/mL with the instrument limits of detection as low as 0.3 ng/mL. The study sheds new light on suitable additives to analyze basic compounds with the advantage of good compatibility with MS detection.

Atmospheric implications of hydration on the formation of methanesulfonic acid and methylamine clusters: A theoretical study.

The effect of hydration on the formation mechanism of clusters consisting of methanesulfonic acid (MSA) and methylamine (MA) is investigated by quantum chemistry (Density Functional Theory, DFT) and kinetics simulation (Atmospheric Chemical Dynamic Code, ACDC) methods. The results showed that the process of hydration is favorable from the thermodynamic point of view, and the presence of water molecules can promote proton transfer significantly. Although MA has a significant influence on the formation rate of MSA-based clusters at the parts per trillion (ppt) levels, the effective nucleation of MSA-MA anhydrous clusters hardly seems to occur under common typical atmospheric conditions. The high concentrations of precursors ([MSA] > 6 × 107 molecules·cm-3 and [MA] > 1 ppt or [MSA] > 1 × 106 molecules·cm-3 and [MA] > 100 ppt) is necessary for the effective nucleation of the MSA-MA system. The formation rate of the MSA-MA system is enhanced significantly by hydration. The formation rate increases with the relative humidity (RH) and reached up to a factor of 2700 at RH = 40%. The formation mechanism of the hydrous system is different from the anhydrous system. The formation of (MSA)2 and (MSA)(MA) dimers is the rate-determining step of the anhydrous and hydrous systems, respectively. In addition, the growth pathway of clusters was complicated by low temperature and simplified by high humidity, respectively. In general, although humidity is a very favorable factor for the formation of the MSA-MA system, the involvement of other species (such as sulfuric acid) may be more effective to promote the nucleation of the MSA-MA system under typical atmospheric environment.

Determination of genotoxic impurities of alkyl methanesulfonates in methanesulfonic acid by gas chromatography–mass spectrometry / 中国药科大学学报

@#An analytical liquid-liquid extraction-gas chromatography–mass spectrometry (LLE-GC-MS) method was established for the determination of genotoxic impurities including methyl methanesulfonate (MMS), ethyl methanesulfonate (EMS) and isopropyl methanesulfonate (IMS) in methanesulfonic acid. An Agilent HP-1MS capillary column (30 m × 0.32 m, 1 μm) was used for separating the analytes by programmed heating with the inlet temperature of 220 °C. Mass spectrometry was operated in positive ion mode, and selective ion monitors were set at m/z 80 for MMS, m/z 79 for EMS, m/z 123 for IMS and m/z 56 for internal standard butyl methanesulfonate (BMS). Results showed that the baseline separation of MMS, EMS and IMS was achieved, and the blank extraction solution had no interference; good linearity was achieved in the range of 37-1 480 ng/mL for three alkyl methanesulfonates; The mean recoveries of MMS, EMS, IMS were 104.99%, 107.26%,108.85%, respectively, with RSD ≤ 4.54%. The established method has the characteristics of specific, sensitive, accurate, stable and good versatility, and has been used for the detection and control of alkyl methanesulfonate impurities in methanesulfonic acid from a variety of manufacturers.

In vitro bioaccessibility of selenoamino acids from selenium (Se)-enriched Chlorella vulgaris biomass in comparison to selenized yeast; a Se-enriched food supplement; and Se-rich foods.

Selenium (Se) is an indispensable microelement in our diet and health issues resulting from deficiencies are well documented. Se-containing food supplements are available on the market including Se-enriched Chlorella vulgaris (Se-Chlorella) which accumulates Se in the form of Se-amino acids (Se-AAs). Despite its popular uses, data about the bioaccessibility of Se-AAs from Se-Chlorella are completely missing. In the present study, gastrointestinal digestion times were optimized and the in vitro bioaccessibility of Se-AAs in Se-Chlorella, Se-yeast, a commercially available Se-enriched food supplement (Se-supplement) and Se rich foods (Se-foods) were compared. Higher bioaccessibility was found in Se-Chlorella (∼49%) as compared to Se-yeast (∼21%), Se-supplement (∼32%) and Se-foods. The methods used in production of Se-Chlorella biomass were also investigated. We found that disintegration increased bioaccessibility whereas the drying process had no effect. Similarly, temperature treatment by microwave oven also increased bioaccessibility whereas boiling water did not.

Quantification of methionine and selenomethionine in biological samples using multiple reaction monitoring high performance liquid chromatography tandem mass spectrometry (MRM-HPLC-MS/MS).

Quantification of selenated amino-acids currently relies on methods employing inductively coupled plasma mass spectrometry (ICP-MS). Although very accurate, these methods do not allow the simultaneous determination of standard amino-acids, hampering the comparison of the content of selenated versus non-selenated species such as methionine (Met) and selenomethionine (SeMet). This paper reports two approaches for the simultaneous quantification of Met and SeMet. In the first approach, standard enzymatic hydrolysis employing Protease XIV was applied for the preparation of samples. The second approach utilized methanesulfonic acid (MA) for the hydrolysis of samples, either in a reflux system or in a microwave oven, followed by derivatization with diethyl ethoxymethylenemalonate. The prepared samples were then analyzed by multiple reaction monitoring high performance liquid chromatography tandem mass spectrometry (MRM-HPLC-MS/MS). Both approaches provided platforms for the accurate determination of selenium/sulfur substitution rate in Met. Moreover the second approach also provided accurate simultaneous quantification of Met and SeMet with a low limit of detection, low limit of quantification and wide linearity range, comparable to the commonly used gas chromatography mass spectrometry (GC-MS) method or ICP-MS. The novel method was validated using certified reference material in conjunction with the GC-MS reference method.

Structure and vibrational spectroscopy of methanesulfonic acid.

In this work, we have used a combination of vibrational spectroscopy (infrared, Raman and inelastic neutron scattering) and periodic density functional theory to investigate the structure of methanesulfonic acid (MSA) in the liquid and solid states. The spectra clearly show that the hydrogen bonding is much stronger in the solid than the liquid state. The structure of MSA is not known; however, mineral acids typically adopt a chain structure in condensed phases. A periodic density functional theory (CASTEP) calculation based on the linear chain structure found in the closely related molecule trifluoromethanesulfonic acid gave good agreement between the observed and calculated spectra, particularly with regard to the methyl and sulfonate groups. The model accounts for the large widths of the asymmetric S-O stretch modes; however, the external mode region is not well described. Together, these observations suggest that the basic model of four molecules in the primitive unit cell, linked by hydrogen bonding into chains, is correct, but that MSA crystallizes in a different space group than that of trifluoromethanesulfonic acid.

Determination of methyl methanesulfonate and ethyl methanesulfonate in methanesulfonic acid by derivatization followed by high-performance liquid chromatography with ultraviolet detection.

Methanesulfonic acid is routinely used in pharmaceuticals but can contain potentially genotoxic impurities such as methyl methanesulfonate and ethyl methanesulfonate. The aim of this study was to develop a simple high-performance liquid chromatography with ultraviolet detection method for determining methyl methanesulfonate and ethyl methanesulfonate in methanesulfonic acid. Samples (250 mg) in water/acetonitrile (200 µL) were first combined with 10.0 mol/L sodium hydroxide solution (270 µL). Then they were mixed with 2.0 mg/mL N,N-diethyldithiocarbamate (500 µL), diluted to 5 mL with N,N-dimethylacetamide and allowed to react at 80°C for 1 h. The derivatives were analyzed using gradient high-performance liquid chromatography with ultraviolet detection (277 nm) and structurally elucidated by liquid chromatography with mass spectrometry. With acetonitrile/5 mmol/L ammonium acetate solution as the eluent and 1 mL/min as the flow rate on a C18 column, the derivatives were eluted at 10.6 and 14.8 min. Good linearity (correlation coefficients > 0.999) and low limits of quantitation (0.6 ppm) were obtained. The recoveries were in the range of 80-115% with relative standard deviation < 5.0%. Finally, the established method was successfully used for the determination of methyl methanesulfonate and ethyl methanesulfonate in methanesulfonic acid.

Metagenomic survey of methanesulfonic acid (MSA) catabolic genes in an Atlantic Ocean surface water sample and in a partial enrichment.

Methanesulfonic acid (MSA) is a relevant intermediate of the biogeochemical cycle of sulfur and environmental microorganisms assume an important role in the mineralization of this compound. Several methylotrophic bacterial strains able to grow on MSA have been isolated from soil or marine water and two conserved operons, msmABCD coding for MSA monooxygenase and msmEFGH coding for a transport system, have been repeatedly encountered in most of these strains. Homologous sequences have also been amplified directly from the environment or observed in marine metagenomic data, but these showed a base composition (G + C content) very different from their counterparts from cultivated bacteria. The aim of this study was to understand which microorganisms within the coastal surface oceanic microflora responded to MSA as a nutrient and how the community evolved in the early phases of an enrichment by means of metagenome and gene-targeted amplicon sequencing. From the phylogenetic point of view, the community shifted significantly with the disappearance of all signals related to the Archaea, the Pelagibacteraceae and phylum SAR406, and the increase in methylotroph-harboring taxa, accompanied by other groups so far not known to comprise methylotrophs such as the Hyphomonadaceae. At the functional level, the abundance of several genes related to sulfur metabolism and methylotrophy increased during the enrichment and the allelic distribution of gene msmA diagnostic for MSA monooxygenase altered considerably. Even more dramatic was the disappearance of MSA import-related gene msmE, which suggests that alternative transporters must be present in the enriched community and illustrate the inadequacy of msmE as an ecofunctional marker for MSA degradation at sea.

The future of airborne sulfur-containing particles in the absence of fossil fuel sulfur dioxide emissions.

Sulfuric acid (H2SO4), formed from oxidation of sulfur dioxide (SO2) emitted during fossil fuel combustion, is a major precursor of new airborne particles, which have well-documented detrimental effects on health, air quality, and climate. Another precursor is methanesulfonic acid (MSA), produced simultaneously with SO2 during the atmospheric oxidation of organosulfur compounds (OSCs), such as dimethyl sulfide. In the present work, a multidisciplinary approach is used to examine how contributions of H2SO4 and MSA to particle formation will change in a large coastal urban area as anthropogenic fossil fuel emissions of SO2 decline. The 3-dimensional University of California Irvine-California Institute of Technology airshed model is used to compare atmospheric concentrations of gas phase MSA, H2SO4, and SO2 under current emissions of fossil fuel-associated SO2 and a best-case futuristic scenario with zero fossil fuel sulfur emissions. Model additions include results from (i) quantum chemical calculations that clarify the previously uncertain gas phase mechanism of formation of MSA and (ii) a combination of published and experimental estimates of OSC emissions, such as those from marine, agricultural, and urban processes, which include pet waste and human breath. Results show that in the zero anthropogenic SO2 emissions case, particle formation potential from H2SO4 will drop by about two orders of magnitude compared with the current situation. However, particles will continue to be generated from the oxidation of natural and anthropogenic sources of OSCs, with contributions from MSA and H2SO4 of a similar order of magnitude. This could be particularly important in agricultural areas where there are significant sources of OSCs.

Capillary ion chromatography with on-column focusing for ultra-trace analysis of methanesulfonate and inorganic anions in limited volume Antarctic ice core samples.

Preservation of ionic species within Antarctic ice yields a unique proxy record of the Earth's climate history. Studies have been focused until now on two proxies: the ionic components of sea salt aerosol and methanesulfonic acid. Measurement of the all of the major ionic species in ice core samples is typically carried out by ion chromatography. Former methods, whilst providing suitable detection limits, have been based upon off-column preconcentration techniques, requiring larger sample volumes, with potential for sample contamination and/or carryover. Here, a new capillary ion chromatography based analytical method has been developed for quantitative analysis of limited volume Antarctic ice core samples. The developed analytical protocol applies capillary ion chromatography (with suppressed conductivity detection) and direct on-column sample injection and focusing, thus eliminating the requirement for off-column sample preconcentration. This limits the total sample volume needed to 300µL per analysis, allowing for triplicate sample analysis with <1mL of sample. This new approach provides a reliable and robust analytical method for the simultaneous determination of organic and inorganic anions, including fluoride, methanesulfonate, chloride, sulfate and nitrate anions. Application to composite ice-core samples is demonstrated, with coupling of the capillary ion chromatograph to high resolution mass spectrometry used to confirm the presence and purity of the observed methanesulfonate peak.

Improvement of synthesis method of 6-methoxyisatin / 药学实践杂志

Objective To improve the synthetic condition of 6‐methoxyisatin .Methods The starting material 3‐me‐thoxyaniline was firstly converted into the intermediate 1‐oximino‐N‐ (3‐methoxyphenyl) acetamide through Sandmeyer reac‐tion ,then 6‐methoxyisatin was conducted with methanesulfonic acid as catalyst in the following ring closure reaction .Results In the second step of the cyclization reaction ,methanesulfonic acid was used to replace the concentrated sulfuric acid which is widely used in literature .The temperature was 80℃ ,the reaction time was 30 min ,and the yield was 81.24% .Conclusion This study provided a synthesis process of 6‐methoxyisatin with simple operation ,mild reaction condition and high yield ,which is suitable for large scale preparation of the compound .

Effect of light transition metal complexes of methanesulfonic acid hydrazide on the viability of yeast Saccharomyces cerevisiae.

The effect of methanesulfonic acid hydrazide (MSH) and its complexes [M(MSH)4Cl2] (M = Mn, Fe, Co, Ni) and [Zn(MSH)2Cl2] on culture growth suppression and viability (Colony Forming Units) of Saccharomyces cerevisiae has been studied. The highest culture growth suppression was exhibited by [Co(MSH)4Cl2], whereas the most cytotoxic appeared [Mn(MSH)4Cl2]. The changes in cell morphology were also traced by means of FACS analysis.

Methanesulfonic acid salt forms of carbamazepine and 10,11-dihydrocarbamazepine.

New methanesulfonic acid salt forms of the anticonvulsant and analgesic active pharmaceutical ingredient carbamazepine and its closely related structural analogue 10,11-dihydrocarbamazepine have been prepared and characterized by single-crystal X-ray diffraction at 120 and 100 K, respectively {namely [(5H-dibenzo[b,f]azepin-5-yl)(hydroxy)methylidene]azanium methanesulfonate, C15H13N2O(+)·CH3SO3(-), and [(10,11-dihydro-5H-dibenzo[b,f]azepin-5-yl)(hydroxy)methylidene]azanium methanesulfonate, C15H15N2O(+)·CH3SO3(-)}. In light of the structural information obtained, the crystal structure of the carbamazepine trifluoroacetic acid monosolvate [dibenzo[b,f]azepine-5-carboxamide-trifluoroacetic acid (1/1), C15H12N2O·CF3COOH] was redetermined at 100 and 270 K, and from this data it was concluded that the protonation state for this solvate species is best described as in an `intermediate state' with the acidic proton located almost at the mid-point between the acid and base.